Exporting from premiere pro CS4

I download a trial version of Adobe Premiere Pro CS4. I am thinking about purchasing one. I was going through some video tutorials on Adobe TV and on the tutorial when they were exporting, they had quite a few more formatting options than it shows on my trial version. It showed about 4 or 5 mpeg formats and on my trial version it does not show any. If I order Premiere Pro, will it have all the mpeg options for exporting?

Yes. MPEG formats are not included with the trial due to licensing reasons.

Similar Messages

  • Exporting from Premiere Pro CS4 using Media Encoder gets stop error

    I am trying to export my timeline from Premiere Pro CS4, using the Adobe Media Encoder CS4 to export my timeline as an MPEG2 HDTV 1080 24, and it goes for about fifteen minutes then I get the blue screen and my computer restarts, telling me the program had a stop error.  Is there a way to go around this step?  Another method to get the mpeg2 without losing quality?  Anything I can do?
    Please offer any knowledge you have before I scream at my computer again.
    Thank you

    as I know Adobe products are buggy no matter what hardware you have.
    I am sorry, but my experience has been the absolute opposite of what you have heard, or experienced. I have used many, many Adobe programs for almost 2 decades (maybe even more than 2 decades?), and have never observed such. I do have to admit that over those many years, I have always had a "state of the art" computer, but have made plenty of $ using Adobe software. Even with my now aging workstation, things work great. Time to upgrade though.
    When troubleshooting issues, they shake out like this:
    1.) system
    2.) Assets
    3.) Project
    4.) OE
    5.) Bugs
    This is after troubleshooting Adobe issues from almost the time that PS hit the PC, when they were only NNTP, in what, 1985?
    Now, I am not saying that your issue IS hardware, but only that that is the most likely issue, given a BSOD. Also, system is the #1 cause of issues, so that is where I start.
    Good luck,
    Hunt

  • Export from premiere pro cs4 for youtube - new error message from youtube

    I wonder if anyone has had a similar problem to me.
    I am using CS4 on a windows 7 computer.
    I have a number of films that I am in the proces of exprting for upload to youtube.
    Since youtube has updated the design and function of it's upload window I am now getting a warning once the upload completes saying "The video that you uploaded may have audio/video sync issues. Please refer to this article for advice on how to correct this issue should it arise."
    The link takes you to a page which gives you a range of settings. It suggest Quicktime as the preferred format with H.264 encoding.
    But in Adobe media encoder cs4 if I select format: quicktime, there is no h264 option.
    I have tried selecting Format: H264 and the apparently obvious Youtube widescreen HD format, but still get the warning. Our footage is all PAL so I normally change this from NTSC to PAL - but even if I do not make this change, I still get the warning.
    I wondered if anyone else has discovered this, and if they have found a work around?
    Any suggestion would be appreciated.
    I am using:
    adobe media encoder 4.2.0.006
    adobe premiere pro 4.2.1
    Finally, in terms of the warning, I do not generally notice sync issues, but occasionally I giet visual glitches once the film is uplaoded to youtube - the latest involved the whole bottom half of the screen being smudged, as though someone had smeared the image from the middle down to the bottom of the screen. It only lasted about half a second.
    Thanks
    Patch

    Hi Jim, you are quite right... that is what it says.
    It is just that when I export a movie using premiere pro, and upload it I get a warning message from youtube. I never like a warning, so I followed the link to the article hoping for a solution.
    I assumed the article indicated youtube's preferred format, so thought 'great, I'll use that- but could not find them in Premiere Pro.
    As you point out it does say it is for iMovie, Final Cut Pro or Quicktime (so my mistake).
    As Ann suggests, as the film looks ok on youtube, I will just carry on using the youtube settings in Premiere Pro, and ignore the warning.
    Thanks for the sugestions,
    Patch

  • Cannot export media from Premiere Pro CS4

    I am unable to export media from premiere pro cs4. The process I go through is as follows
    select files/sequence I want to export
    select file menu
    scroll down to export
    select media
    nothing happens, premiere pro "freezes", as though it was going to open up adobe media encoder but does nothing, premiere pro can be "unfrozen" simply by pressing esc.
    I have tried doing all of this with media encoder open and still nothing happens. if anyone has any suggestions please throw them my way. thanks.
    j

    Then read the following link carefully and follow all included links as well. Specifically answer all questions in the first link and depending on whether the earlier info helped at all, continue to the second link and provide the details requested in that second link:
    Some suggestions

  • Media Encoder crashes when exporting from Premiere Pro

    Media Encoder crashes when exporting from Premiere Pro. I am queueing multiple files for export and Media Encoder will crash. The computer system has 32GB of RAM and the videos export fine in Premiere, but that requires exporting each one individually. Each video file is being down converted and some can be quite long (upwards of 3-5 hours). Nothing else is running on the computer that would take up memory.
    Any idea why Media Encoder will crash?

    Try turning off GPU acceleration.

  • Exporting from Premiere Pro CC 2014

    Hello there,
    Every time that I am willing to export my project my Premiere Pro CC 2014 stop responding all together. I tried the short cut (Commend+M) or going through the Manu bar. the result is the same, Premiere Pro CC 2014 just freezes and does not respond to anything till I force quit it and restart it allover again. I tried exporting from Premiere Pro it self, without using Media Encoder, but the problem remains the same.
    I am using the new Mac Pro. I heard Adobe Premiere Pro is experiencing  problems with the New Mac Pro. Is that true? Or is there other issue?
    Thank you and looking forward to hear back,
    Maruf

    Hi Maruf,
    Maruf Noyoft wrote:
    Kevin,
    I reset as you suggested and it took care of it.
    Great!
    Maruf Noyoft wrote:
    So, if you don't mind explaining me the cause of the problem that I had? Or
    an article about it. It is just for me for getting to know better the program and the system.
    Thank you very much and appreciate your help enormously.
    Since preference files get touched by the application frequently, there is always the possibility of their corruption. When this happens, you start to see what we call "unexpected behaviors" from Premiere Pro. This problem happens infrequently, but it is a good first troubleshooting step to try on your own. This is the case with most every non-linear editing application I have used over the years (Final Cut Pro, Avid, Media 100, etc.).
    Thanks,
    Kevin

  • Exporting from Premiere Pro into Story

    Can the metadata etc be exported from Premiere Pro into Story.
    For example in the process of roughing out a documentary idea I'm shooting clips and making subclips in bins and developing sequences in this rough style.  It would be useful to document this in Adobe Story if such an interface exists thanks...
    Many thanks

    The closest I can find is here:
    http://helpx.adobe.com/story/help/workflow-movies-script.html
    Seems like there is a semi-manual solotion ... has anyone used this reverse workflow in anger I wonder and can describe their experience, the results and the potential?

  • Why remove .flv export from Premiere Pro CC 2014? And what's a good workaround?

    Why remove .flv export from Premiere Pro CC 2014? And what's a good workaround?

    OK, so you want to put it on your own web page. That's fine as long as you know how to create a web page.
    The next thing you have to decide is how big do you want the video to appear on the web page. Many people just post on YouTube and then embed the video into their web page. That way, the video can take advantage of all of the various sizes that YouTube provides.
    In any case, I suggest that you use H.264. But the data rate depends on the size of the file. If you are going to display it in HD, then you probably want to start at about 20Mb/s and go up or down from there. The required data rate depends on what you find acceptable, and that depends on the amount of movement in the video. For example, a talking head next to a white board explaining something requires a lot less bits to represent the image because less changes are taking place from frame to frame. If you use 10Mb/s for that, you might find 20Mb/s or more is required to make you happy if you shot a football game from the sidelines.
    I generally use settings that look like this image. If you have any questions as to why I choose these settings, feel free to ask.

  • My computer crashes when I export from Premiere Pro cc.?  Also, is there a known problem with Panasonic HC-V720 footage?

    Why does my computer crash when I try to export from Premiere Pro cc? Also, is there a known problem with footage from Panasonic Hc-v720?@

    Ask in http://forums.adobe.com/community/premiere/content
    This forum is about the Cloud as a delivery process, not about using individual programs
    If you start at the Forums Index http://forums.adobe.com/index.jspa
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll

  • Losing audio quality when exporting from premiere pro

    I have now had this happen with two different videos. I play the video in premiere pro and the audio is fine. I export the video and lose most of the quality of the audio portion. One project is a music session when exported I only get the main vocal the drums aren't audible only a buzz sound is made where the kick drum would usually come in. On another project is a thank you video for a family member and the audio is distorted after being exported. The audio sounds fine inside of the session. Once exported the audio will still work fine on my computer and my iphone 5s as long as I'm wearing headphones, once I try to play the video through my iphone 5s speakers the audio quality is gone, making the noises as previously stated. My iphone can still play other tracks fine but videos and audio exported from Premiere Pro are distorted. Any advice on how I can export the video so I wont lose audio quality when playing the video on an iphone? I know it's not my iphone speakers, they play other songs just fine.

    The source files as far as the audio goes are wav files that I've pulled off of my desktop. My sequence settings are 1920 by 1080 at 29.97 frames per second. The export settings are H.264 with the preset YouTube (HD 1080 29.97 FPS) and I've also tried HD video 1080p 29.97 FPS. If this isn't enough information please let me know I'm in the learning phase. Audio wise the quality is set to high and I'm exporting at 4800 kh and a bit rate of 190. I've also tried a bit rate of 320 and 264 I think it is and still had the same problems.  Let me know if I need to do screen shots I really want to figure this out.
    Thanks for your help!

  • Exporting 5.1 ac3 audio from Premiere Pro CS4

    Hi there,
    I wonder if anybody can help me out with exporting 5.1 ac3 audio from Premiere CS4 version 4.1.0?
    I have a 3min long HD 5.1 clip that I need to cut down to 60seconds and add fade transitions to. The final clip will be used in a media player with very specific spec - the clip needs to remain HD 1080p with a frame rate of 29.97 and a maximum CBR of 38. The audio must be 5.1 aac. The format can be mpeg 2 or h.264. The overall quality loss needs to be minimal.
    Up to now I have been cutting up footage that only needs to be stereo and I found the best way to to this while keeping quality was to use Prem Pro and export as mpeg 2 1080p 29.97, quality:5, bitratre: CBR 38, audio as mpeg layer 2 (as these clips were stereo only). These clips played back fine and looked great so I wanted to keep the 5.1 clip process as close to this as possible.
    So far all I have been able to get from Premiere Pro is an audio codec called DVD_LPCM which the media player will not recognise. I'm a bit of a novice when it comes to 5.1 audio so I may be doing something obviously wrong...
    - I have purchased the 5.1 surcode codec and its activated.
    - I have started a new AVCHD (I need 1920x1080) 1080p 29.97  project with a 5.1 audio master
    - The orignal file is an mpeg which I have pulled into PPro and selected Clip > Audio > Breakout to mono
    - I take the 6 mono channels in the project panel and put them into thier own mono tracks in the sequence.
    - the video I use is the original mpeg with the 5.1audio muted in the sequence.
    - When i select each track in the project panel and go to Clip > Audio > Source channel mappings, I see that track has already been allocated a source channel. So I go to the Audio Mixer panel and adjust the 5.1 panners for each tyrack according to what the Source Channel Mapping window has told me - Audio 1 is is L, audio 2 is R, audio 3 is LS, 4 -  Rs, 5- C and 6- LFE
    - I cut the video and all the mono track to the 60seconds I need and export using these settings:
    Video - exactly as before
    Audio -
    Format - Dolby Digital, Codec - SurCode, Audio Coding Mode: 3/1 (L, R, C, LFE, Ls, Rs - 5.1 Surround), LFE: on.
    The clip exports with DVD_LPCM 5.1 audio. Is it to do with the AVCHD preset? Could anyone help me get aac? Any help would be appreciated.
    Thanks in advance

    Using AME and the SurCode Plug-in, here's how the dialog screen looks for the Audio Tab in PrPro 2.0. It should be similar in CS4:
    You do have the Minnetonka SurCode DD 5.1 SS plug-in, right?
    Good luck, and hope that this is helpful.
    Hunt
    PS - note that in the screen-cap, I have composited the dialog box, as though it fully displayed, with no need to scroll it. Depending on your display, you may need to scroll, and your scroll bars will look different from what you see here - just ignore that part of it.
    Message was edited by: the_wine_snob - Added PS

  • No sound when I export to encore from Premiere Pro CS4

    I have created two separate video project in Premiere Pro CS4, when I export via dynamic link to Encore one exports with both video and audio, the second only exports video and no audion. However, when i look at the properties of the asset the Media Category indicates video & audio. Any suggestions?

    Lots more information needed for anyone to help... starting with your source video and going on to your project settings
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
    For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
    For Mac http://mediainspector.massanti.com/
    http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
    If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs
    Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
    H.264 will NOT work inside an AVI wrapper http://forums.adobe.com/thread/854115
    More information needed for someone to help... click these links and provided the requested information
    -http://forums.adobe.com/message/4200840
    -http://forums.adobe.com/thread/416679

  • Exporting Settings (Premiere Pro CS4 with Matrox)

    Premiere Pro CS4
    Canon XHG1 camera (HDV/Mini DV/NTSC)
    Matrox RT.X2
    HP Z800 with 2.4GHz Intel Xeon processor, 12GB RAM, and running Windows 7
    I have experience with digital video editing in Premiere, exporting up to 40-minute videos (that took maybe 2 hours to export), but the last version I used was maybe Premiere 7 and I didn’t have the Matrox card (and was using a computer much less capable than this one). I was also just using a consumer-level camera, not the big Canon. Now I’m trying to export video and there are way more choices than I had before, and it seems like the estimated time to export is quite high, despite having a good machine and the Matrox card.
    So my question is, is there a chart anywhere that says what settings to use for the particular output you are looking for? For instance, what should I pick for the web that is good enough quality but not a giant file? What should I pick if I want to make a DVD? Is there a way to directly export to a DVD if you aren’t manipulating the video at all? I’ve been told I should be able to utilize the Matrox card to reduce the export time, but it seems like it takes at least 5 times the length of the video to export no matter what.
    I guess an important question here is, what is the normal amount of time I should expect something to take to export? I have a 2-hour video that just needs to be transferred from the mini DV tapes and burned to a DVD – no effects necessary. The lowest export time estimate I can get is around 10 hours, and I have no idea what that will look like in terms of quality when done.
    In the future I will be doing mostly short (2 minutes or less) videos for web, so export time should be short, but I’d still like to know what the best settings are and how long it should take.
    I hope this makes sense – thanks for your help!
    Genevieve

    Thanks for your help. I have copied and pasted my results below. It seemed to get through that queue very quickly, so perhaps the slowness is do to something more specific in the project I am working on. Perhaps a large mismatch in what I am capturing vs. what I am exporting? The camera is recording in HD.... I don't know much about hardware at all, and only know very basic stuff about exporting, so I know it is probably difficult to understand what I'm looking for. The last version of Premiere I had basically allowed you to choose format, size, quality, and codec whereas this version has so many different export settings I can pick from, it is hard to just guess and check which ones work best.
    Hewlett Packard,  Computer Manufacturer
    HP Z800 Workstation,   Computer Model
    132.2,  secs Total Benchmark Time
    32,  secs AVI  Encoding Time
    46.2,  secs MPEG Elapsed Time
    54,  secs Rendering Time
    Intel,    CPU Manufacturer
    Xeon E5530,    CPU Model
    2.40,    GHz CPU speed
    1,    Number of CPU chips
    4,    Total Number of Cores
    12GB,    GB RAM
    Premiere Pro CS4,    APP Version PPBM4 DV
    Win 7 (64),    OSVersion
    SAS,    OS Disk Interface
    500xR1E,    GB OS Disk Capacity
    15,000,    OS Disk Speed
    Same as OS,    Project Disk Interface
    Same as OS,    GB Project Disk Capacity
    Same as OS,    Project Disk Speed
    Same as OS,    Preview Disk Interface
    Same as OS,    GB Preview Disk Capacity
    Same as OS,    Preview Disk Speed
    Same as OS,    Output Disk Interface
    Same as OS,    GB Output Disk Capacity
    Same as OS,    Output Disk Speed
    NVidia Quadro FX 1800,    Graphics Board
    Using a Matrox RT.X2 Capture Card,    Comment

  • Quality loss when importing/exporting in premiere pro cs4

    Hi, I am fairly new to premiere pro cs4, but have some experience in final cut and after effects cs4, and I have a problem thats been bugging me for awhile.
    I decided to try out premiere pro again [only used two or three times] I made a new project and sequence then imported a screen capture of a game I had on my desktop. when I dragged it into the timeline and looked over the footage it was blurry and not very clear at all, so i just did a quick edit and exported it, thinking the final product would have better quality. turns out the quality of the final product was even worse than it was when i was editing it.
         I used DV-NTSC widescreen 48khz preset and didn't change any of the general settings.
         the screen capture is a .mov file, 114mb, its dimensions are 762 x 502, animation codec, and 4,970 bit rate.
         i used the program ishowu you record my screen, i set it to have a 25 frame rate, max quality, and animation compression.
         I used the youtube widescreen HD preset H.264 format [I had planed to upload it as a quality test.]
    Another question is can i set my own dimensions for the sequence instead of having to choose a preset? I hope I didn't leave anything out, and thanks in advance.
    here's what it looks like before i edited it.
    and heres after:

    I use a lot of 3D animations from Mac-artists, and request the same files, MOV with the Animation CODEC. I have never had any issue with those, in my SD DVD Projects. Not sure what is going on in your case. My guess would be that it's the Scaling to the DV Preset, that is causing you an issue. In my case, the animations match my source footage, 720 x 480 w/ appropriate PAR @ 29.97 FPS, so there is no scaling taking place.
    As for the Frame Size, you want to explore the Desktop Preset. Unlike all the rest, it allows you to do exactly what you want - adjust the parameters to match your source footage.
    Good luck,
    Hunt

  • Is there a way to set a default "Source Range" in AME when exporting from Premiere Pro CC?

    When exporting a sequence from Premiere Pro CC, you are able to toggle between 4 drop down options within Adobe Media Encoder on what Source Range you'd like to export (Work Area, Sequence In/Out, Entire Sequence, Custom) as seen here:
    Is there a way to set the default Source Range to something besides Sequence In/Out?
    My reason for asking is that sometimes I export multiple sequences at once using AME's Queue. I add my custom presets to each Sequence and hit export, but SOMETIMES I may have accidentally marked an in point on my timeline and by default it's set to export only that In-to-Out part of the sequence.
    I know what you may be thinking...well, just don't add any In/Out points to your sequence on the timeline or clear them first. The trouble is that I often don't see them or catch them when working quickly. In Premiere Pro CC, I use the "Lighter Brightness" Appearance setting because it's easier on my eyes after editing 10 hours a day, 6 days a week. Sure, darker looks cooler, but it kills my eyes for some reason. Anyway, PPro CC has a troublesome appearance issue in CC where it's not "optimized" for editing when you change it to a lighter appearance like it was in CS6. I've already contacted Adobe about this and another appearance issue (involving highlighted clips when in Lighter Appearance setting) and they are "actively working on fixing this appearance issue asap". 
    For reference, here's Premiere Pro CC in/out points in default dark appearance (notice the slightly lighter grey area):
    Now here's that same in/out in "Lighter Appearance":
    Not exactly optimized. Can hardly see it. Good luck spotting that little guy on a long timeline. Sadly, this affects in/out points in the Source Window as well. Really hard to see.
    Conversly, CS6 looked the best (the blue REALLY stands out making things easy to see):
    So my question again...is there a way to set the default "Source Range" to something else besides Sequence In/Out so that I don't end up doing what I just did and leaving for several hours while batch exporting only to come back and find that I exported only a "portion" of one of my big sequences?
    Thank you!

    shooternz wrote:
    Here is the solution:  Slow down. Give your project some love. Smell the roses.
    Agreed about the roses but alas my next project always calls. Actually, I think what happens is I give each project SO much love that when it comes to exporting, I've run out of time.
    shooternz wrote:
    Then it would not be a default...it would be an option and you already have that option.
    Semantics aside, I would love to be able to have it at least default to whatever option was last chosen. Or, perhaps I shouldn't use the word default again...I'd love it to simply remember my preferred setting. That's all.

Maybe you are looking for