Exporting - strange results!!

First: I have around 35.000 photos in Aperture.
I have exported many, many pictures (masters and versions) in the past.
Since two days I have the problem that all exports - "Version - Jpeg Original Size" are only 100x75 in size... even when the original size is e.g. 3072x2304.
While exporting "Version - Jpeg 50% of Original Size" results in the correct size 1536x1152...
This is really strange, as it happens to every photo I try to export as "Version - Jpeg Original Size". The size will always be 100x75...
Please help me!

Most likely the Jpg - original size preset has been changed or corrupted. First thing to do is to go into edit and take a look at all of the parameters of that preset. If they look wrong - change them, if they look normal try creating another new preset with the file type size etc. that you want and test it.
If that doesn't work I would trash the aperture preferences and then see what happens, I have seen printing presets get screwed up in such a way that trashing them and having Aperture create new defaults was the only reasonable "fix".
RB

Similar Messages

Dvd burning from idvd with strange results

I have made a short 5 minute movie in FCP and exported it to QuickTime as I have done numerous times before. I created a menu in IDVD and then dragged QT file in. Everything looks great and plays on screen great. Then I burn the DVD. Once done I put it on TV via a different DVD player and it plays however about a minute into the video on the top of the screen I see part of another image. It almost looks like part of my G4 background screen (which is a picture) has somehow leaked through and gotten burned onto this dvd. Anyhow, I thought it was a bad DVD so burned another (TDK 8x DVD-r). Same thing happened again. Even when I put this burned DVD on my G-4 and play it I still have weird image. I went back and checked the movie again in FCP and then re-exported to QT as a self contained movie and did the whole IDVD thing all over again. Still has the weird image leaking through. By the way, before burning I did play the QT file through QT and that plays perfect! It also plays perfect through FCP. I am concerned it could be my drive. Any suggestions or hints.

Well I discovered the problem previously posted by me concerning dvd burning with strange results. I found the exact spot in the burned dvd where the video had the other image appear along the top and then went to FCP and found the exact spot on it. Lo and behold on FCP at that exact spot in the video a "marker" had been inserted. I cleared all markers and re-exported and burned again in idvd and everything works perfectly. So apparently the marker insert in FCP caused all the problems.

Strange result from insert into...select query

Hello guys,
I need your preciuos help for a question maybe simple, but that I can't explain by myself!
I have a query of "insert into...select" that, as I have explained in the title, returns a strange result. In facts, If I execute ONLY the SELECT statement the query returns the expected result (so 2 rows); instead If I execute the entire statement, that is the "insert into...select", the query returns 0 rows inserted!!
Following an example of the query:
INSERT
INTO TITOLI_ORI
COD_TITOLO_RICCONS ,
D_ESTRAZIONE ,
COD_SOCIETA ,
COD_PIANO_CONTABILE ,
COD_CONTO_CONTABILE ,
COD_RUBRICATO_STATISTICO_1 ,
COD_NDG ,
NUM_ESEGUITO ,
CUR_IMPORTO_RICCONS ,
CUR_IMPORTO_BICO ,
FLG_MODIFICATO ,
CUR_NON_ASSEGNATO ,
FLG_QUOTATO ,
COD_CATEG ,
TIP_COPERTURA ,
TIPTAS_TITOLO
SELECT NEWID,
'28-feb-2111',
COD_SOCIETA,
COD_PIANO_CONTABILE,
COD_CONTO_CONTABILE,
COD_RUBRICATO_STATISTICO_1,
COD_NDG,
NUM_ESEGUITO,
CUR_VAL_IMPEGNI,
'ABC' as CUR_IMPORTO_BICO,
0 as FLG_MODIFICATO,
NULL as CUR_NON_ASSEGNATO,
FLG_QUOTATO,
COD_CATEG,
TIP_COPERTURA,
TIP_TASSO
FROM
(SELECT S.COD_SOC AS COD_SOCIETA,
S.TIP_PIANO_CNTB AS COD_PIANO_CONTABILE,
S.COD_CONTO_CNTB AS COD_CONTO_CONTABILE,
S.COD_RUBR_STAT AS COD_RUBRICATO_STATISTICO_1,
TRC.COD_RAGGR_IAS AS COD_RAGGRUPPAMENTO_IAS,
TRC.COD_NDG AS COD_NDG,
TRC.COD_ESEG AS NUM_ESEGUITO,
CAST((TRC.IMP_PLUS_MINUS_VAL/TRC.IMP_CAMB) AS FLOAT) AS CUR_VAL_IMPEGNI,
TRC.TIP_QUOTAZ AS FLG_QUOTATO,
TRC.COD_CAT_TIT AS COD_CATEG,
TIP_COP AS TIP_COPERTURA,
T.TIP_TASSO AS TIP_TASSO
FROM S_SLD_CNTB S
INNER JOIN
(SELECT DISTINCT COD_SOC,
TIP_PIANO_CNTB,
COD_CONTO_CNTB,
COD_RUBR_STAT ,
COD_INTER_TIT AS COD_INTER
FROM S_COLLEG_CONTO_CNTB_TIT
WHERE COD_SOC = 'ME'
) CCC
ON S.COD_SOC = CCC.COD_SOC
AND S.TIP_PIANO_CNTB = CCC.TIP_PIANO_CNTB
AND S.COD_CONTO_CNTB = CCC.COD_CONTO_CNTB
AND S.COD_RUBR_STAT = CCC.COD_RUBR_STAT
INNER JOIN S_TIT_RICCONS TRC
ON CCC.COD_INTER = TRC.COD_INTER_TIT
AND CCC.COD_SOC = TRC.COD_SOC
AND TRC.COD_RAGGR_IAS = RTRIM('VALUE1 ')
AND TRC.COD_RAGGR_IAS NOT IN ('VALUE2')
AND TRC.DES_TIP_SLD_TIT_RICCONS IN ('VALUE3')
AND TRC.DES_MOV_TIT = RTRIM('VALUE4 ')
AND TRC.COD_CAT_TIT = RTRIM('VALUE4 ')
AND TRC.COD_INTER_TIT = RTRIM('VALUE5')
AND '28-feb-2011' = TRC.DAT_RIF
LEFT JOIN S_TIT T
ON T.COD_INTER_TIT = TRC.COD_INTER_TIT
AND T.COD_SOC = TRC.COD_SOC
AND '28-feb-2011' = T.DAT_RIF
INNER JOIN S_ANAG_SOGG AG
ON TRC.COD_NDG = AG.COD_NDG
AND AG.COD_SOC = TRC.COD_SOC
AND '28-feb-2011' = AG.DAT_RIF
WHERE S.DAT_RIF = '28-feb-2011'
AND (S.FLG_ANULL_BICO = 0
OR S.FLG_ANULL_BICO IS NULL)
AND S.COD_SOC = 'V6'
AND LENGTH(RTRIM(S.COD_CONTO_CNTB)) = 10
AND S.TIP_PIANO_CNTB = 'V7'
AND TRC.IMP_PLUS_MINUS_VAL < 0
AND SUBSTR(S.COD_CONTO_CNTB,1,7) IN (RTRIM('VALUE8 '))
Thanks a lot

Right, I have executed this steps:
- I have changed the query with the select count(*)
- Changed the insert into with the select count(*)
- Executed the insert into
These are the result:
SQL> select count(*) from TITOLI_ORI2;
COUNT(*)
1
BUT:
SQL> select * from TITOLI_ORI2;
A
0
The insert into that I've modified is this:
INSERT INTO bsc.TITOLI_ORI2
select count(*)
FROM
(SELECT bsc.NEWID,
TO_DATE('28-feb-2111','DD-MON-YYYY') as data,
COD_SOCIETA,
COD_PIANO_CONTABILE,
COD_CONTO_CONTABILE,
COD_RUBRICATO_STATISTICO_1,
COD_NDG,
NUM_ESEGUITO,
CUR_VAL_IMPEGNI,
'ABC' AS CUR_IMPORTO_BICO,
0 AS FLG_MODIFICATO,
NULL CUR_NON_ASSEGNATO,
FLG_QUOTATO,
COD_CATEG,
TIP_COPERTURA,
TIP_TASSO
FROM
(SELECT S.COD_SOC AS COD_SOCIETA,
S.TIP_PIANO_CNTB AS COD_PIANO_CONTABILE,
S.COD_CONTO_CNTB AS COD_CONTO_CONTABILE,
S.COD_RUBR_STAT AS COD_RUBRICATO_STATISTICO_1,
TRC.COD_RAGGR_IAS AS COD_RAGGRUPPAMENTO_IAS,
TRC.COD_NDG AS COD_NDG,
TRC.COD_ESEG AS NUM_ESEGUITO,
CAST((TRC.IMP_PLUS_MINUS_VAL/TRC.IMP_CAMB) AS FLOAT) AS CUR_VAL_IMPEGNI,
TRC.TIP_QUOTAZ AS FLG_QUOTATO,
TRC.COD_CAT_TIT AS COD_CATEG,
TIP_COP AS TIP_COPERTURA,
T.TIP_TASSO AS TIP_TASSO
FROM bsc.S_SLD_CNTB S
INNER JOIN
(SELECT DISTINCT COD_SOC,
TIP_PIANO_CNTB,
COD_CONTO_CNTB,
COD_RUBR_STAT ,
COD_INTER_TIT AS COD_INTER
FROM bsc.S_COLLEG_CONTO_CNTB_TIT
WHERE COD_SOC = 'ME'
) CCC
ON S.COD_SOC = CCC.COD_SOC
AND S.TIP_PIANO_CNTB = CCC.TIP_PIANO_CNTB
AND S.COD_CONTO_CNTB = CCC.COD_CONTO_CNTB
AND S.COD_RUBR_STAT = CCC.COD_RUBR_STAT
INNER JOIN bsc.S_TIT_RICCONS TRC
ON CCC.COD_INTER = TRC.COD_INTER_TIT
AND CCC.COD_SOC = TRC.COD_SOC
AND TRC.COD_RAGGR_IAS = RTRIM('HFT ')
AND TRC.COD_RAGGR_IAS NOT IN ('GPO')
AND TRC.DES_TIP_SLD_TIT_RICCONS IN ('DISPONIBILI')
AND TRC.DES_MOV_TIT = RTRIM('CONSEGNARE ')
AND TRC.COD_CAT_TIT = RTRIM('OBBLIGAZIONE ')
AND TRC.COD_INTER_TIT = RTRIM('334058')
AND '28-feb-2011' = TRC.DAT_RIF
LEFT JOIN bsc.S_TIT T
ON T.COD_INTER_TIT = TRC.COD_INTER_TIT
AND T.COD_SOC = TRC.COD_SOC
AND '28-feb-2011' = T.DAT_RIF
INNER JOIN bsc.S_ANAG_SOGG AG
ON TRC.COD_NDG = AG.COD_NDG
AND AG.COD_SOC = TRC.COD_SOC
AND '28-feb-2011' = AG.DAT_RIF
WHERE S.DAT_RIF = '28-feb-2011'
AND (S.FLG_ANULL_BICO = 0
OR S.FLG_ANULL_BICO IS NULL)
AND S.COD_SOC = 'ME'
AND LENGTH(RTRIM(S.COD_CONTO_CNTB)) = 10
AND S.TIP_PIANO_CNTB = 'IS'
AND TRC.IMP_PLUS_MINUS_VAL < 0
AND SUBSTR(S.COD_CONTO_CNTB,1,7) IN (RTRIM('P044C11 '))
Another time the strange result returns!!
And I've created the table TITOLI_ORI2 as create table TITOLI_ORI2 (a number); to contain the number result of the query.

Using Powershell Script Run simple query in MS Access 2007 and export the results of query to Excel

Hi Experts,
I have a Access 2007 DB file and 2 Big tables inside that (bigger than the size that can be easily handled by MS Excel 2007).
My requirement is automate using powershell scripts the below things.
1. Create a SQL query in Access DB and save that in access DB
2. Run the saved query and export the result in excel sheet where I can create the charts and Pivots. Thanks in advance
Prajesh

Do you have to use the Access query, couldn't you just recreate the query in Powershell? Here's a link with good info that references an existing script for querying an Access database:
http://blogs.technet.com/b/heyscriptingguy/archive/2009/08/13/hey-scripting-guy-can-i-query-a-microsoft-access-database-with-a-windows-powershell-script.aspx
Once you have your dataset you can pipe it to
Export-Csv -NoType c:\pathtofile\output.csv

How can I export the results of a query?

After executing a select statement I can see the results in a grid but how can I export the results (the data)?
How can I export the results of a join of two or more tables?

Right click in the results grid and select the Export menu option

Export query results to a CSV file

Hi,
My requirement is I need to export the results of a query to a CSV file. Can anyone please suggest a way to include the column names also in the CSV file?
Thanks in advance.
Annie

Following code is from asktom. I have modified to include column heading. This will get your desired CSV file for a given query.
create or replace function dump_csv( p_query     in varchar2,
                                      p_separator in varchar2
                                                    default ',',
                                      p_dir       in varchar2 ,
                                      p_filename in varchar2 )
return number
AUTHID CURRENT_USER
is
    l_output        utl_file.file_type;
    l_theCursor     integer default dbms_sql.open_cursor;
    l_columnValue   varchar2(2000);
    l_status        integer;
    l_colCnt        number default 0;
    l_separator     varchar2(10) default '';
    l_cnt           number default 0;
     l_colDesc          dbms_sql.DESC_TAB;
begin
    l_output := utl_file.fopen( p_dir, p_filename, 'w' );
    dbms_sql.parse( l_theCursor, p_query, dbms_sql.native );
    for i in 1 .. 255 loop
        begin
            dbms_sql.define_column( l_theCursor, i,
                                    l_columnValue, 2000 );
            l_colCnt := i;
        exception
            when others then
                if ( sqlcode = -1007 ) then exit;
                else
                    raise;
                end if;
        end;
    end loop;
    dbms_sql.define_column( l_theCursor, 1, l_columnValue, 2000 );
    l_status := dbms_sql.execute(l_theCursor);
     dbms_sql.describe_columns(l_theCursor,l_colCnt, l_colDesc);
     l_separator := '';
     for lColCnt in 1..l_colCnt
     loop
            utl_file.put( l_output, l_separator || '"' || Upper(l_colDesc(lColCnt).col_name) || '"');
               l_separator := p_separator;
     end loop;
     utl_file.new_line( l_output );
    loop
        exit when ( dbms_sql.fetch_rows(l_theCursor) <= 0 );
        l_separator := '';
        for i in 1 .. l_colCnt loop
            dbms_sql.column_value( l_theCursor, i,
                                   l_columnValue );
            utl_file.put( l_output, l_separator || '"' ||
                                    l_columnValue || '"');
            l_separator := p_separator;
        end loop;
        utl_file.new_line( l_output );
        l_cnt := l_cnt+1;
    end loop;
    dbms_sql.close_cursor(l_theCursor);
    utl_file.fclose( l_output );
    return l_cnt;
end dump_csv;The original link is below.
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:95212348059
Thanks,
Karthick.

How to export query results

How can I export query results from sqlplus on the command line? Are there ways to specify the format such as CSV, TAB, XML, etc?
I've seen one approach that involves creating a shell script and piping the output to a file:
#!/bin/sh
sqlplus user/password <<__EOF__
set heading off;
set newpage none;
select f1, ',', f2, ',', f3 from some_table;
__EOF__
Then pipe the output to a file. Is there a simpler solution to this?

http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:235814350980

Scheduling a webi report and export the result in PDF on local disk

I'm working with the new SDK to schedule a report and export its result on my local c:\ hard disk drive. My code give no errors at run but I do not find the file on my root.
The Instance counter of the report increase each time, so there is a refresh.
Is something wrong in the following lines? I just follow the examples give in the documentation for scheduling.
Thanks in advance !
Here is my code :
               Destinations oDestinations = Destinations.Factory.newInstance();
               Destination[] oDestination = new Destination[1];
               oDestination[0] = Destination.Factory.newInstance();
               oDestination[0].setName("CrystalEnterprise.DiskUnmanaged");
               DiskUnmanagedScheduleOptions diskOptions = DiskUnmanagedScheduleOptions.Factory.newInstance();
               String[] destinationFile = new String[1];
               destinationFile[0] = "c:\\" + report_name + ".pdf";
               DestinationFiles destinationFiles = DestinationFiles.Factory.newInstance();
               destinationFiles.setDestinationFileArray(destinationFile);
               diskOptions.setDestinationFiles(destinationFiles);
               oDestination[0].setDestinationScheduleOptions(diskOptions);
               oDestinations.setDestinationArray(oDestination);
               System.out.println("Getting report...");
               ResponseHolder respons = this.platform.get("path://InfoObjects/<path to report>/" + report_name, null);
               InfoObjects reports = respons.getInfoObjects();
               if (reports == null)
                    return;
               Webi myReport = (Webi)reports.getInfoObjectArray()[0];
               System.out.println("Getting scheduling info...");
               SchedulingInfo schedulingInfo = myReport.getSchedulingInfo();
               boolean newSchedulingInfo = false;
               if (schedulingInfo == null)
                    schedulingInfo = SchedulingInfo.Factory.newInstance();
                    newSchedulingInfo = true;
               System.out.println("Setting scheduling info...");
               schedulingInfo.setRightNow(Boolean.TRUE);
               schedulingInfo.setScheduleType(ScheduleTypeEnum.ONCE);
               schedulingInfo.setDestinations(oDestinations);
               WebiProcessingInfo webiProcessingInfo = myReport.getWebiProcessingInfo();
               if(webiProcessingInfo == null) {
                    webiProcessingInfo = WebiProcessingInfo.Factory.newInstance();
               WebiFormatOptions webiReportFormatOptions = webiProcessingInfo.getWebiFormatOptions();
               if(webiReportFormatOptions == null)
                    webiReportFormatOptions = WebiFormatOptions.Factory.newInstance();
               System.out.println("Setting Format...");
               webiReportFormatOptions.setFormat(WebiFormatEnum.PDF);
               webiProcessingInfo.setWebiFormatOptions(webiReportFormatOptions);
               myReport.setWebiProcessingInfo(webiProcessingInfo);
               if (newSchedulingInfo)
                    myReport.setSchedulingInfo(schedulingInfo);
               System.out.println("Schedule...");
               this.platform.schedule(reports);
               System.out.println("Schedule done...");

Hi Jerome,
I have gon ethrough your code again and there we are missing the destination plugin.
We have to query the info store to get the disk unmanaged plugin.
Below is the code
IDestinationPlugin destPlugin = null; //Destination plugin returned by InfoStore Query
        IDiskUnmanagedOptions diskUnmanagedOptions = null; //Object returned by the getSchedulingOptions() method
        List listDestination = null; //List object to hold destination file location
        IDestination destination = null; //Destination Interface
        //retrieve the Scheduling Options and cast it as IDiskUnmanagedOptions
        //This interface is the one which allows us to add the file location
        //for the scheduling
          for(int i = 0; i< oInfoObjects.getResultSize();i++)
           oInfoObject = (IInfoObject) oInfoObjects.get(i);
           destPlugin = (IDestinationPlugin)iStore.query( "SELECT * from CI_SYSTEMOBJECTS WHERE SI_PARENTID=29 and SI_NAME='CrystalEnterprise.DiskUnmanaged'").get(0);
          diskUnmanagedOptions = (IDiskUnmanagedOptions) destPlugin.getScheduleOptions();
        listDestination = diskUnmanagedOptions.getDestinationFiles();
          String dest = "c:\\";
        listDestination.add (dest + oInfoObject.getTitle()+".pdf");
          schedInfo = oInfoObject.getSchedulingInfo();
        schedInfo.setRightNow(true);
        schedInfo.setType(CeScheduleType.ONCE);
        //retrieve the IDestination interface from the SchedulingInfo object
        //use the setFromPlugin() to apply the changes we made to the
        //IDestinationPlugin object returned from the IStore
        destination = schedInfo.getDestination();
        destination.setFromPlugin(destPlugin);
          iStore.schedule(oInfoObjects);
Regards,
Prithvi

Strange symbols appear on my desktop, producing even stranger results!

Strange symbols appear on my desktop, producing even stranger results!

These symbols are for short cuts. could be a command to move text insertion point to beginning of document or if you have been in system preferences keyboard and clicked on the modifier key and set one of the options it would be for setting cap lock. Don't know why you are showing a screen shot of it. Have you clicked on it. Have you been doing any work with documents. You could go to disk utilities and repair permissions or do an pram reset. Command/Option?P/R while holding down the power button for three chimes and release.

How to export the result to excel or txt as the SQL result format.

Hello,
I want to know how to export the result of the Oracle select result to a txt or a excel file.What is the command.
I knew the command of spool,but the format of it export is not the same to the result of Oracle result area.
Thank you very much.

Hello Yucky,
what do you mean by
the format of it export is not the same to the result of Oracle result areaDo you mean the output of a tool other than SQL*PLUS?
To enhance the formatting of a spool file you can set
SET MARKUP HTML ON
SPOOL ONthis will add html markup to format the output as a html table which you can open in a browser or in excel.
Regards
Marcus

How to export the result from executing sql statement to excel file ?

HI all,
Great with Oracle SQL Developer, but I have have a trouble as follwing :
I want to export the result from executing sql statement to excel file . I do easily like that in TOAD ,
anyone can help me to do that ? Thanks so much
Sigmasvn

Hello Sue,
I just tried to export to excel with the esdev extension and got java.lang.NumberFormatException. I found the workaround at Re: Windows Multi-language env, - how do I set English for application lang?
open the file sqldeveloper\jdev\bin\sqldeveloper.conf and add the following two lines:
AddVMOption -Duser.language=en
AddVMOption -Duser.country=USyet now my date formats in excel are 'american-style' instead of german. For example 01-DEC-01 so excel does not recognize it as date and therefore I can not simply change the format.
When export to excel will be native to 1.1 perhaps someone can have a look at this 'feature'
Regards
Marcus

How to Export The result of querry to Excel?

Hi ,
Can you tell me how can i export the result of a query is having to an excel or to any file in JDeveloper?
It is having 70 thousand records.

Raphael is right, excl can£t load more then 65000 rows and from my experience using the excl export listener is too slow.
You can however use e.g. POI and generate a native exel file. Still the 65000 row limit is valid.
Timo

Sql Developer 3.1 - Exporting a result set in xls generates and empty file

Ever since upgrading to the Production version SQL Developer 3.1 (3.1.07) it appears that there is an issue when attempting to export a result set as a .xls format.
If I attempt to export in .xls format, the exported file is an empty file (i,e no output). When I change the export type to txt, csv or xlsx the results are exported as expected.
This appears to be a bug introduced in the Production version as I was successfully able to perform these tasks on the various 3.1 EA releases.
Am I alone in this, have I misconfigured something or is this a bug?

I keep having problems exporting to XLSX - mostly in cases where the data is voluminous and the format would be preferable over plain XLS as it does not have the 65krows limit ;-{ The data is read to the data grid (sometimes fast, sometimes much slower and "in chunks"), then the "task progress" won't move anymore, and the export file remains empty; If I cancel the task, trying to export again results in a message stating that sqldeveloper still has the output file locked.

Help - count function returns strange results

hi everyone,
here's my scenario: i'm trying to get the NUMBER OF REPORTS and NUMBER OF
IMAGES GROUP BY MONTH from the two tables below.
REPORT
reportid(*primary key)
date
IMAGE
reportid(*foreign key referring to report's table)
image
sample output:
MONTH NO.OF REPORTS NO. OF IMAGES
feb 01 10 9
mar 01 12 8
my SQL goes like this:
select to_char(date, 'month-yy'),
count(REPORT.reportid), count(IMAGE.reportid)
from REPORT, IMAGE
where REPORT.reportid = IMAGE.reportid
group by to_char(date, 'month-yy')
the above sql yielded strange results, number of images is equal to the number of reports, which is of course wrong! as one report may or may not contain one or more image.
i dont know what's wrong with the above statement, but if i were to group it
by REPORTID and DAY rather than MONTH, then amazingly it works! what's
wrong with the count, why does it give me the same result if i group by
MONTH.
can anyone shed some light on this?

try using the following example:
Table TEST_REPORT
RPTID RPTDATE
1 02-JAN-01
3 02-JAN-01
2 02-JAN-01
5 11-FEB-01
6 11-FEB-01
7 11-FEB-01
Table TEST_IMAGE
RPTID IM
1 1
2 1
3 1
SQL:
select to_char(rptdate,'MON-YYYY'),
sum(decode(a.rptid,null,0,1)) report_cnt,
sum(decode(b.rptid,null,0,1)) image_cnt
from test_report a, test_image b
where a.rptid = b.rptid(+)
group by to_char(rptdate,'MON-YYYY');
<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by skcedric:
hi everyone,
here's my scenario: i'm trying to get the NUMBER OF REPORTS and NUMBER OF
IMAGES GROUP BY MONTH from the two tables below.
REPORT
reportid(*primary key)
date
IMAGE
reportid(*foreign key referring to report's table)
image
sample output:
MONTH NO.OF REPORTS NO. OF IMAGES
feb 01 10 9
mar 01 12 8
my SQL goes like this:
select to_char(date, 'month-yy'),
count(REPORT.reportid), count(IMAGE.reportid)
from REPORT, IMAGE
where REPORT.reportid = IMAGE.reportid
group by to_char(date, 'month-yy')
the above sql yielded strange results, number of images is equal to the number of reports, which is of course wrong! as one report may or may not contain one or more image.
i dont know what's wrong with the above statement, but if i were to group it
by REPORTID and DAY rather than MONTH, then amazingly it works! what's
wrong with the count, why does it give me the same result if i group by
MONTH.
can anyone shed some light on this? <HR></BLOCKQUOTE>
null

Export Report Results

How can the user export report results to an excel, csv or pdf document.
Where can that option be added?
Thanks in advance.

You should have the following options at the bottom of each Report.
Refresh - Printer Friendly- Download
Amit

Exporting - strange results!!

Similar Messages

Maybe you are looking for