Express and M-Audio Keystation

I Just got an 49e Keystation usb keyboard. Im using Logic Express and I not sure how to get the sounds i record to play back. It show that it is playing but there is no sound. can someone please help me

Hi loztchyld,
I have an M-Audio 49e, and it works perfectly with Logic Express, so don't despair. I assume since you see the input from the 49e in the Logic transporter window (right?), that you have run the Audio midi setup application in Utilities to install the 49e, that it appears in that window, that you have run the setup assistant for LE and that it shows the 49e as a connected device (right?).
The 49e is used to input notes as an 'AudioInstrument' so you have to create and audio instrument track for it to do it on, say a Steinway piano. Having done that, the track can not be muted, no other track can be solo'd, the volume phaser has to be turned up, your speakers have to be working, the volume slider on the 49e has to be slid at least half way up, say. That's what I can think of off the bat. You might check that the Audio Drivers in the Logic Preferences>Audio is set to Built in Audio. See if any of that works.
Good luck,
Ray

Similar Messages

Airport Express and the audio output.

I bought an Airport Express sometime last year, when it first came out. I don't have any of the packaging or the manual with me. What I would like to know is if Airport Express had support for both analog and optical audio output right from the start (when it was first released).
Thanks.

Since its release over a year ago, there has only ever been one hardware version of the Airport Express. Therefore - yes - a combo analog/optical digital output has been built into the Airport Express right from the start.
You can download PDF versions of all the manuals at:
http://www.apple.com/support/airport/

Solved: AirPort Express and AirTunes Audio Distortion Connected to a Stereo

*The problem*: Terrible sound distortion while using AirPort Express AirTunes features. Even when nothing was plugged in, there would be a buzzing noise.
*The setup*: AirPort Express connected via 3.5mm stereo jack to a pair of computer stereo speakers. Note: This post does not apply to you if you are using an optical Toslink between the AirPort Express and your speakers. iTunes installed on a Mac. AirTunes setup to allow music to stream wirelessly to AirPort Express and speakers.
*The solution*: The AirPort Express needs to be grounded. The included AC tip is only two prong. In the US, the third prong (round) is used for grounding.
Therefore you just need to attach the three prong AC tip. This is not included with the AirPort Express. What you need is the Apple Power Extension Cord which has a 3 prong tip.
Example:
http://www.amazon.com/Adapter-Extension-Apple-PowerBook-Notebook/dp/B002V4XKRS
This is the same extension cord that comes with most Apple notebooks.
Hope this helps!

Bob,
This is really simple so no instructions are necessary.
Plug in the new Express when you get it and have it "Join the existing network"...
Give the iTunes Music section a name like "Front Room Stereo" and that's it...
Plug the stereo into the Express and select it in iTunes for playing music.
Joseph Kriz
<img src="http://images.apple.com/search/images/waitanimation.gif" alt="wheel"

New airplay feature and optical audio on Apple TV

I have a 3rd gen Apple tv and just updated to the software to the latest 5.1 version. Does anyone know if I can now stream to my airport express and send audio down an optical audio cable to my stereo simultaneously?

Many thanks for your test on this. Do you know if the aTV will then play down the optical audio and HDMI simultaneously. I pressume it will so you can attach surround sound systems?

I have bought a new airport express and using it with my macbook (iTunes 10.2.2). I have joined an existing network for internet in my home and with that i am trying to play the music via itunes but there is audio dropouts every 60 secs or so. any soln ?

I have bought a new airport express and using it with my macbook (iTunes 10.2.2). I have joined an existing wireless network for internet in my home and with that i am trying to play the music via itunes but there is audio dropouts every 60 secs or so. I am using a set of speakers from kenwood connected to the airport express. The operating system on my macbook is mac os X 10.5.8. i am sure it is not a problem of streaming music online because i have even tried playing music which are stored in my macbook.
Is there any problem with the setting in itunes or quicktime ? Kindly reply...... I am waiting for your valuable suggestion.
Thank you a lot in advance.

I am shocked to have found this same AX audio dropout problem starting TODAY, every few seconds the audio just drops for a couple seconds and then resumes: Latest software versions of everything. No iPad, iPhone or Touch. Internet hardwired to D-Link DES1105 (1000baseT Switch) hardwired to new 80211N AX, AX optical to stereo, AX Wi-Fi internet to basic 1st-gen MacBook operating at 80211G, and an older 'G' AX extender at the far end of the house, away from all this. The MacBook streaming iTunes is usually 12 feet from AX. I've used this setup for years of trouble-free AirTunes / Airplay until today. Today I also found 2 very reliable fixes and 1 way to force a dropout, but first, I read some posts and tried ALL following settings one-at-a-time and restored them ALL because NONE of them helped: Turned off IPV6. Streamed to multiple speakers 'Computer' and 'AX' (restored to just AX). Turned off 'Ask to Join new (WiFi) Networks'. Turned off Bluetooth (can't live without Magic Trackpad, so glad that wasn't it). Here's my discoveries: Lo and behold, each time I click the Airport icon in the Menu (you know it shows you've got 4 bars from AX) when the status switches to 'Looking for Networks' for a second it CAUSES the AX audio to drop out for a couple seconds (it never did that before today.) iTunes still playing, streaming, AX laser still lit, but the 'PCM' light on stereo and the sound GOES OUT EVERY time I click the Airport icon in the menubar, just like the regular, annoying dropouts. So, to reduce traffic I quit Safari (3 tabs, no streaming, just Gmail, Google, and Netflix browsing). Lo and behold, the dropouts stopped altogether. No other Web apps going (not iTunes Store, Genius, Ping, nothing), so I launched Chrome to the same 3 tabs and the dropouts HAVE NOT RETURNED. That's right, not only did simply QUITTING SAFARI cure it, and Chrome doesn't contribute to it, but I can demonstrate it just by forcing my Airport to re-scan. Works for me, written using Chrome. The other reliable fix is to hardwire MacBook to the Switch. This is obviously not ideal, but Airplay audio doesn't drop out over Ethernet. Also, in all my tests, it made no difference whether iTunes did the streaming, or Airfoil did.

I have an Airport Express connected via optical toslink to a dac/amp in turn connected to speakers. When using iTunes I get message "no speakers connected to Airport Express" and audio sound has drop outs.

I have an Airport Express connected via optical toslink to a dac/amp in turn connected to speakers. When using iTunes I get message "no speakers connected to Airport Express" and audio sound has drop outs.

Ok, if you are connecting the AirPort Express Base Station (AX) to the existing wireless network, then the DSL in the next room is most likely a combination DSL modem and wireless router. Thanks for clarifying that for me.
Although they may only be separated by a single wall, the building material used in that wall may be enough to prevent the AX from receving a "good" signal from the DSL router.
Since I don't know what computing equipment you have available, please check out this AirPort User Tip: AirPort - Optimal Base Station Placement to see if you can get some SNR measurements at the location of your AX. To do this properly, you will want to power-off the AX and only get these measurements for the DSL router.

Added an AirPort express and now I have audio problems...

Hello here,
I enjoyed to have music streamed at the same time to my two AirPort Express in two different rooms until yesterday. Today I added a new Airport Express and now I have problems to stream the audio to all the three bases at the same time: sometimes the audio signal is dropped by some AirPort randomly. Here is my configuration:
1. One AirPort Extreme base station (main base)
2. Three AirPort Express
3. All the AirPort bases (4 total) are connected at the same Network through WDS (the main base is the AirPort Extreme one)
4. All the bases are updated to the latest firmware.
Any idea? Maybe the data is too much for the network to be handled? Isn't supposed to have limits, right? Theorically I could add as many AirPort Express bases I want without to have audio drops... or not?
Any help is very welcome.
Thank you in advance.
Sincerely,
Fabrizio

An 802.11g network has maximum real-world bandwidth of about 25 Mbps; most people will get less than that. Taking into consideration the 2.1 Mbps worth of audio streaming bandwidth (3 x 700 kbps) and the significant decrease in bandwidth inherent in a WDS network as complex as yours, I'm not at all surprised that you're having dropouts.
If you could run Ethernet to one or more of the Expresses from your AEBS (using an Ethernet switch if necessary), you could increase your effective wireless bandwidth to the point where your drop-outs should cease.

M-Audio Keystation 49e - USB Midi Keyboard and Motion Midi behavior

Has anyone tried the Motion 2 Midi behavior feature with the
"M-Audio Keystation 49e - USB Midi Keyboard"?
Does it work well?
This is it.
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/71702/wo/Nb2Ohvn QaSox2DPwme2dfhdMs0s/1.0.19.1.0.8.25.7.11.0.3
Thanks!
G5 1.8 GHz Dual Mac OS X (10.4.4)

I forgot to mention that this is the other midi keyboard I am looking at:
http://www.m-audio.com/products/en_us/Oxygen8-main.html
Does anyone have any of these two keyboards to use with motion?

Why doesn't time capsule come with AirPlay and an audio out plug? I have to buy an Airport Express station and put it right on top of my time capsule to wire it to my stereo. Doesn't make sense...

My Time Capsule is right by my stereo and would like to stream my itunes there. But it looks like I would have to add an Airport express station right on top of my time capsule to do this. Which doesn't make sense to have 2 wireless routers on top of each other. Is that the only way?

Well you can't do it with a Time Capsule.
You could get an Apple TV instead of an Air Port Express and then you can get video as well..

Airport Admin loses Express and Extreme, no iTunes, no Network Printer

Ever since I have upgraded to Tiger, I’ve experienced a strange, random Airport Extreme/Express problem which I have not been able to solve. I can sometimes replicate the problem but never consistently.
Laptop Configuration: 15” Powerbook G4 running Mac OS Tiger 10.4.3 with most current patches. System is stable and manifests no problems.
Airport Network Configuration: Network is closed with 128bit WEP encryption. No other laptops attached to the network besides my Powerbook.
Base Station: Airport Express attached to DSL modem with “Distribute IP Addresses” checkbox enabled, running firmware v6.2, stereo speakers plugged into audio jack. Network access is restricted by MAC address; RADIUS not in use, default IP address scheme is used.
Remote Base Station: Airport Extreme running firmware v5.6. The Extreme hosts a HP 1012 LaserJet printer plugged into the USB port and an IP phone plugged into the LAN port.
The Express and Extreme are within 15 feet of each other and enjoy a clear, strong 802.11b/g wireless signal on Channel 1 with a multicast setting of 11, interface robustness enabled and transmit power set to 100%.
Symptoms: iTunes loses its remote speakers setting; I cannot print to the network printer attached via USB to Airport Extreme; Airport Extreme and Express do not appear in Airport Admin Utility….yet I can access the network via the Powerbook, I have full internet access and IP phone can make calls. I just can’t print to the network printer or use AirTunes.
Troubleshooting: I can restore all functionality if I perform a hard reset of the Airport Express Base Station then re-import my saved Airport Express base station configuration settings. I typically look at the Airport Admin Utility to determine if functionality has been restored. If both the Airport Express and Extreme appear in the Admin utility, all is well. If they are not there, sometimes a laptop reboot will restore them, other times they will not appear when the Admin Utility is opened or when I rescan. If a rescan fails, I can access the Express and Extreme by typing in the IP address and password. Then each will show up in the Admin Utility and I can make changes and restart the devices. Even with a device restart, they will not automatically appear in the Admin Utility.
I first thought the problem was associated with the laptop going to sleep but this is not the case. Sometimes when I reset the Base Station, re-import the configs and reboot the laptop, I am able to automatically see the Express and Extreme in the Airport Admin Utility. Other times I can’t. Sometimes my settings will last a few days and I’ll enjoy full functionality then they will disappear. Other times they will disappear immediately, even with a reboot and a reset of the Express and Extreme.
If I use a 3rd party utility called Cocktail and reboot, I can restore functionality. Cocktail will delete all user, system and kernel caches, delete all log files, rerun disk permissions, and run the daily, weekly and monthly Apple Kron maintenance scripts. If I reboot after running Cocktail, my Airport Extreme and Express appear in the Admin Utility. Thus, I think the problem may be associated with a Airport Extreme cache file becoming corrupted or deleted upon reboot…….but I am not positive.
If there are any Airport experts out there, let me know what you think. I love Apple, I love my Mac and my little Airport Network…….but this is ******’ me off! Thus my plea for advanced geekery review and assistance.
Talk to me!

If the Airport Admin Utility cannot automatically "see" your Base Station, you have a big clue as to the cause of your problems. On a private LAN, it should never be necessary to select "Other" and manually type in the Base Station's IP address.
The most likely cause for the Airport Admin Utility not being able to automatically "see" an Airport Base Station - is a firewall on the Mac that is blocking it. Any of the following are possible:
- you have installed non-Apple firewall software on the Mac
- you have installed so-called "internet protection" software on the Mac
- you have installed "internet monitoring" software on the Mac (like "Little Snitch")
- you have installed VPN client software on the Mac - and many of these applications install their own firewall
All this stuff needs to go, since it will cause all sorts of trouble with communication between a Base Station or Airport Express, and a Mac.
I'd also be very worried about what this "Cocktail" utility is really doing to your system.

Airport express and apple tv, airport express and apple tv

Hi
Just wandering if this is possible.
I was wandering if I could set up a wireless network with an airport express and then connect the apple tv to it so I could show movies etc via my MAC while travelling.
Note there would be no internet connection involved.
I believe you can set up the 'no internet' wirelss net work with the AE, just not sure you could connect the the Apple TV to it.
May be a question for different forum, sorry if it is,
Thanks in advance,
Rich

I can play videos from the Apple Videos app and the from Photos app with the video going to the monitor and the audio through the speakers attached to the Airport Express.
but as soon as I try to do it with Keynote, no luck. I have to play videos in Keynote without sound.
what can I do to fix that?

Airport Express as wifi audio for ip camera?

Hello all. I have a question regarding Airport Express's audio transmitting capabilities. First, I recently purchased an Airport Express to expand the wifi range in my new house. The house is one floor, and my Linksys N router is located on the other side of the house from my bedroom. The signal from the Linksys is spotty at best in the bedroom, so I have the Airport Express connected via CAT5 in bridge mode in my bedroom. The signal is great and everything has worked fine so far with that setup.
The reason that I needed wifi stronger in the bedroom is that we have 2 IP cameras that we use as baby monitors for our toddler and newborn. We have a Trendnet system, which includes a 7" wifi monitor that displays multiple Trendnet cameras connected to your network simultaneously. That all works great as well, with only one drawback. The monitor does not support audio from the 2 IP cameras at all. So I get video but no audio, and the audio is important when using them as baby monitors.
The IP cameras are audio capable, and you can actually hear the audio when you access the cameras from your computer. The only problem is that we have a desktop at home and no laptop (although I recently purchased an iPad, but all IP camera apps that I seen so far have the same lack of audio issue). The IP cameras also have a 3.5 mm output jack on them, so you can hook up speakers to them to extract the sound that way.
My question is this...if I purchased a 2nd Airport Express, is there a way that I could connect the audio output to an AE (through the 3.5 mm jacks) by the baby's camera, and then have the audio wirelessly transmitted to the AE in our bedroom (hooking up a small set of speakers to the AE in the bedroom as the output for the audio)?
I'm very new to the Airport Express world, so any help would be appreciated.
Thanks in advance!

My question is this...if I purchased a 2nd Airport Express, is there a way that I could connect the audio output to an AE (through the 3.5 mm jacks) by the baby's camera, and then have the audio wirelessly transmitted to the AE in our bedroom (hooking up a small set of speakers to the AE in the bedroom as the output for the audio)?
Sorry, but no. The audio port on the AirPort Express Base Station (AX) is an audio OUTPUT port, not an input port ... so connecting the output audio from the camera via this port won't work. The AX's audio is dependent on receiving an AirTunes (or ROAP protocol) stream over IP ... typically from iTunes (or as Jolly has pointed out via a third-party solution like Airfoil).

Airport Express and Airtunes not working

Hi all. I have a Digital Audio G4. I've been able to use my G4 with iTunes and my Airport Express for quite a while. All of sudden iTunes no longer sees it. The Airport Admin Utility doesn't see it either. But I can still connect to the internet with it. What makes this even weirder is, I also have a MacBook Pro. The MacBook Pro has no problem seeing the Airport Express in the Airport Admin Utility and in iTunes.
Any Help you can give is much appreciated.

I can't offer any help. I am having the same problem except I have an Airport Extreme with the Airport Express acting as an extender. The only thing that works for me is unplugging the Airport Express and plugging it back in. Sometimes it is fine the entire day. Other times I have to do this multiple times throughout the day. I don't think this is a good, long-term solution. Any help anyone?

Logic Express and Garritan Personal Orchestra

Hi. Please can somebody explain (simply!) how to access Garritan sounds in Logic Express 8.
Many Thanks
Nick

Straight from the Garritan website:
http://www.garritan.com/GPO-features.html
+No Sampler Required:+
+The collection comes integrated with the acclaimed Kontakt Player 2 sample player from Native Instruments and works as a virtual instrument. No need to purchase a separate sampler. You can adjust a number of parameters – variability, tuning and other audio characteristics – so you can control the sound of each instrument individually.+
If you installed GPO, create a Software Instrument track using the Kontakt 2 AU plugin.

How many airport express can I add to my network for the purpose of using the airport express to send audio signal to different rooms in the house? I'm interested I'm running about six different zones.

How many airport express can I add to my network for the purpose of using the airport express to send audio signal to different rooms in the house? I'm interested I'm running about six different zones.
What I'm looking to do is to have self powered in ceiling speakers in every room in my house with out having to run wires to every room to carry the audio signal. I would like to use the airport express to do the job of carting the audio signal.
Here's my set up now I have an airport extreme and one airport express that I use to carry audio to one room.

FWIW. I have used up to four AirPort Express Base Stations (AX) for streaming sucessfully in pretty much the way you have described. I didn't have a need to try more so I can't attest that more would or would not work.

Express and M-Audio Keystation

Similar Messages

Maybe you are looking for