Exsistance of a node depends on a value of source field.

I need to do graphical mapping such that the exsistance of a node in target side depends upon the value of a field in sorce side. Can some one tel me how to proceed?

Hi Pooja,
use can use"createIf" function.Ur problem will be solved
check here how to use createIF function...
/people/stefan.grube/blog/2006/01/09/the-use-of-suppress-in-the-xi-30-graphical-mapping-tool
Read this http://help.sap.com/saphelp_nw04/helpdata/en/d9/3033f96c79674f90e3ab8d101a595b/content.htm
And check these threads
Createif node function
Regards
BILL
**reward with points if it helps u!!

Similar Messages

PO Form with Terms & Conditions that Change Depending on a Value in Another Field

Hi - I have read through the relevant topics in this forum and have attempted several of them without luck. I am currently working on a form in which there is an empty JFMain (I do not want to populate fields on this page since I don't want things in this page my "static" header - logos, title, etc. since the Terms and Conditions pages should not show any of this.) On my page 2, I have subforms for all my fields except my Terms and Conditions. (These fields are controlled by a data file.) On my remaining pages I have 3 sets of Terms and Conditions - all about a page long - hard-coded as text and placed in subforms with a dummy field off page to ensure they print. What I want to do is print the subforms from page 2 and then the applicable terms from page 3, 4, or 5 depending on the value in a field located in one of the subforms on page 2. What I currently get is my subforms and then ALL my terms printing. Any thoughts?
My preamble overrides look like this:
^define group:D_HEADER \field$POSITION\reserve".11",in\subformHEADER.
^define group:G_HEADER @group:D_HEADER.
^define group:dummy!FldNotAvail \groupG_Terms_Private_Commodity
^define group:dummy2!FldNotAvail \groupG_Terms_Private_Services
^define group:dummy3!FldNotAvail \groupG_Terms_Public
^define group:JfEndData!EndData @group:D_end.
I had to place the JFEndData! statement into the Preamble since the last subform with fields called before the Terms subforms has a global field from another subform above it. For whatever reason, it was duplicating this subform after printing the Terms and Conditions.
I tried adding a nested if statement into field that will control when I want each subform to print but it was ignored. I also tried hardcoding a group call into the preamble with the logic as well with no results. If someone has example code they can share, this would be great.

I receive Adobe help forum posts via email and I've been saving a few for the pointers they contain. I have some saved that might help you out a bit...
A reply to the "Please can some one help me out......." post by Mr BoJangles on 10/29/2007 gives some information about forcing a subfield to be displayed.
A reply to the "Conditional logic" post by Marco Degl'Innocenti on 8/2/2006 gives information on initiating a subform based on the value of a field in the data stream.
A reply to the logic post by Marco DeglInnocenti on 2/22/07 also gives information on initiating a subform based on the value of a field.
I hope these can be of help. If you can't access them on the forum I can repost them.

Disabling button depending on the Value of a field in a standard page

Hi,
How can I disable a button depending on the value selected in a particular field of the same page? Is it possible to do so in a Oracle standard page? Please guide me in resolving this requirement.
Thanks,
Swagatika

Swagatika,
You can attach PPR event to the textinput field and use method
pageContext.ForwardImmediatelyToCurrentPage().As process request method will be called again,here you can use method setDisabled(boolean) in OAsubmitButtonBean, to enable or disable your button!
--Mukul

Render link depending on calculated value of another field

I am using jdeveloper 11.1.2
I have table with many columns, and the last column contains commandLink
I want to render this command link depending on calculated function (FileExport.getTranslateFileName) using another fields in the table (row.SciId) as parameters
<af:column>
<af:commandLink" rendered="#{FileExport.hasTranslateFile}">
</af:commandLink>
</af:column>
how can I implement that without adding transient field?

yes FileExport is managed bean
DCIteratorBinding iterator = getBindings().findIteratorBinding("UpdateRequestDCIterator");
Row row = iterator.getCurrentRow();
Object sciIdObject = row.getAttribute("SciId");
but I don't know how to get the correct value of (row.SciId) for each row in my table
my code always return the same value for the first row

Shading part of a JTable Cell dependent upon the value of the cell

Hi
Was hoping some one woudl be able to provide some help with this. I'm trying to create a renderer that will "shade" part of a JTable cell's background depending upon the value in the cell as a percentage (E.g. if the cell contains 0.25 then a quarter of the cell background will be shaded)
What I've got so far is a renderer which will draw a rectangle whose width is the relevant percentage of the cell's width. (i.e. the width of the column) based on something similar I found in the forum but the part I'm struggling with is getting it to draw this rectangle in any cell other than the first cell. I've tried using .getCellRect(...) to get the x and y position of the cell to draw the rectangle but I still can't make it work.
The code for my renderer as it stands is:
import java.awt.Component;
import java.awt.Graphics;
import java.awt.Graphics2D;
import javax.swing.JLabel;
import javax.swing.JTable;
import javax.swing.table.TableCellRenderer;
public class PercentageRepresentationRenderer extends JLabel implements TableCellRenderer{
     double percentageValue;
     double rectWidth;
     double rectHeight;
     JTable table;
     int row;
     int column;
     int x;
     int y;
     public Component getTableCellRendererComponent(JTable table, Object value, boolean isSelected, boolean hasFocus, int row, int column) {
          if (value instanceof Number)
               this.table = table;
               this.row = row;
               this.column = column;
               Number numValue = (Number)value;
               percentageValue = numValue.doubleValue();
               rectHeight = table.getRowHeight(row);
               rectWidth = percentageValue * table.getColumnModel().getColumn(column).getWidth();
          return this;
     public void paintComponent(Graphics g) {
        x = table.getCellRect(row, column, false).x;
        y = table.getCellRect(row, column, false).y;
          setOpaque(false);
        Graphics2D g2d = (Graphics2D)g;
        g2d.fillRect(x,y, new Double(rectWidth).intValue(), new Double(rectHeight).intValue());
        super.paintComponent(g);
}and the following code produces a runnable example:
import javax.swing.JFrame;
import javax.swing.JScrollPane;
import javax.swing.JTable;
import javax.swing.table.DefaultTableModel;
public class PercentageTestTable extends JFrame {
     public PercentageTestTable()
          Object[] columnNames = new Object[]{"A","B"};
          Object[][] tableData = new Object[][]{{0.25,0.5},{0.75,1.0}};
          DefaultTableModel testModel = new DefaultTableModel(tableData,columnNames);
          JTable test = new JTable(testModel);
          test.setDefaultRenderer(Object.class, new PercentageRepresentationRenderer());
          JScrollPane scroll = new JScrollPane();
          scroll.getViewport().add(test);
          add(scroll);
     public static void main(String[] args)
          PercentageTestTable testTable = new PercentageTestTable();
          testTable.pack();
          testTable.setVisible(true);
          testTable.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
}If anyone could help or point me in the right direction, I'd appreciate it.
Ruanae

This is an example I published some while ago -
import java.awt.*;
import javax.swing.*;
import javax.swing.table.*;
public class Fred120 extends JPanel
    static final Object[][] tableData =
        {1, new Double(10.0)},
        {2, new Double(20.0)},
        {3, new Double(50.0)},
        {4, new Double(10.0)},
        {5, new Double(95.0)},
        {6, new Double(60.0)},
    static final Object[] headers =
        "One",
        "Two",
    public Fred120() throws Exception
        super(new BorderLayout());
        final DefaultTableModel model = new DefaultTableModel(tableData, headers);
        final JTable table = new JTable(model);
        table.getColumnModel().getColumn(1).setCellRenderer( new LocalCellRenderer(120.0));
        add(table);
        add(table.getTableHeader(), BorderLayout.NORTH);
    public class LocalCellRenderer extends DefaultTableCellRenderer
        private double v = 0.0;
        private double maxV;
        private final JPanel renderer = new JPanel(new GridLayout(1,0))
            public void paintComponent(Graphics g)
                super.paintComponent(g);
                g.setColor(Color.CYAN);
                int w = (int)(getWidth() * v / maxV + 0.5);
                int h = getHeight();
                g.fillRect(0, 0, w, h);
                g.drawRect(0, 0, w, h);
        private LocalCellRenderer(double maxV)
            this.maxV = maxV;
            renderer.add(this);
            renderer.setOpaque(true);
            renderer.setBackground(Color.YELLOW);
            renderer.setBorder(null);
            setOpaque(false);
            setHorizontalAlignment(JLabel.CENTER);
        public Component getTableCellRendererComponent(JTable table, Object value, boolean isSelected, boolean hasFocus, int row, int col)
            final JLabel label = (JLabel) super.getTableCellRendererComponent(table, value, isSelected, hasFocus, row, col);
            if (value instanceof Double)
                v = ((Double)value).doubleValue();
            return renderer;
    public static void main(String[] args) throws Exception
        final JFrame frame = new JFrame("Fred120");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.setContentPane(new Fred120());
        frame.pack();
        frame.setLocationRelativeTo(null);
        frame.setVisible(true);
}

How to read the value of a field belonging to a different context node in GET_I method during runtime

I want the read the value of a field,'LCSTATUS' belonging to context node 'BTADMINH' in the GET_I method of the field, 'ZZFLD000008' belonging to context node,'ZBTACTIVITYH'.
In the context node class of context node 'ZBTACTIVITYH',I have created an instance attribute,GR_OWNER type ref to context class.
I get the following error in the line - lv_act_status = Lr_entity->if_bol_bo_property_access~GET_PROPERTY_AS_STRING( 'LCSTATUS' ).
'An exception (CX_CRM_CIC_PARAMETER_ERROR) occurred Message no. TPDA430'
I have used the below code.
method GET_I_ZZFLD000008.
     DATA: current TYPE REF TO if_bol_bo_property_access,
           lv_act_status TYPE string.
     DATA:lr_entity TYPE REF TO cl_crm_bol_entity,
           lr_current TYPE REF TO if_bol_bo_property_access,
          lr_parent TYPE REF TO cl_crm_bol_entity.
     rv_disabled = 'TRUE'.
     if iterator is bound.
       current = iterator->get_current( ).
     else.
       current = collection_wrapper->get_current( ).
     endif.
CHECK gr_owner IS BOUND.
lr_entity ?= gr_owner->btadminh->collection_wrapper->get_current( ).
CHECK lr_entity IS BOUND.
lv_act_status = Lr_entity->if_bol_bo_property_access~GET_PROPERTY_AS_STRING( 'LCSTATUS' ). "error states that lcstatus can't be used here.
   TRY.
         IF current->is_property_readonly(
                       'ZZFLD000008' ) = abap_false. "#EC NOTEXT
           rv_disabled = 'FALSE'.
         ENDIF.
     CATCH cx_sy_ref_is_initial cx_sy_move_cast_error
           cx_crm_genil_model_error.
       RETURN.
   ENDTRY.
endmethod.

Hi,
LCSTATUS is not an attribute of the BTADMINH structure. It is read using the relation to the status object
BTADMINH-> BTHeaderStatusSet-> BTStatusHCurrent-> ACT_STATUS.
Try reading the ACT_STATUS of object BTStatus as given below.
        data: coll   type ref to if_bol_entity_col.
       data: entity type ref to cl_crm_bol_entity,
                     lv_act_status TYPE string.
       entity ?= current.                                                               "BTADMINH entity.
       coll = entity->get_related_entities(
                iv_relation_name = 'BTHeaderStatusSet' ).    "#EC NOTEXT
       current = coll->get_current( ).
        entity ?= current.
       coll = entity->get_related_entities(
                iv_relation_name = 'BTStatusHCurrent' ).     "#EC NOTEXT
       current = coll->get_current( ).
        try.
       lv_act_status = current->if_bol_bo_property_access~GET_PROPERTY_AS_STRING( 'ACT_STATUS' ).
         catch cx_crm_cic_parameter_error.
       endtry.
Regards JP

Change the colour of a cell text depending on the value Web Reports (NW04s)

Hi all,
does anyone know how to change the color of the text of a cell depending on its value on Web Reports? For example red text for values smaller than zero and blue for values bigger than zero?
I know you can create exceptions, but that changes the background color of the cell and not the text color
I have tried modifying the theme but the property "negative text" doesn't related to cell values.
Thanks
C
PD: Point will be awarded!
Message was edited by:
 Carles Prunera

This function changes all numeric fields to blue if no css style is set.
[code]
function turnblue(){
var cells =document.getElementsByTagName('a');
for ( i=0; i<cells.length; i++){
 if ( cells.className == '' ){
 var changeColor = checknumber(cells.innerHTML);
// additional condition on value
 if (changeColor) {
 cells.style.color = '#0000FF'
function checknumber(cNumber){
var x= cNumber
var anum=/(\d+$)|(\d\.\d$)/
if (anum.test(x))
 testresult=true
else{
 testresult=false
return (testresult)
[/code]
hope it helps

Mass Upload of object dependency for characteristics value

Hi ,
I need to upload the object dependency for characteristics values through transaction CT04. My input data consists of characteristcs name , characteristics value and the object dependency (KNNAM) . Need to populate the KNNAM field alone .
Have tried with the FM 'CTMV_CHARACT_CHANGE_KNOWL_VAL' which suits my requirement but teh dependencies are not getting uploaded . Am I missing anything ? Since I do not have class details i.e class num and class type I am not able to use the BAPI like 'BAPI_CLASS_CHARVALUE_LOCAL_DEP ' . Please suggest any othe r suitable method .
Thanks in advance.
Sanjeev

Hi,
Please check the below link..
BAPI for Characteristic Dependency
Thanks.

How to remove target node if source field value is empty SAP PI Mapping

Hello,
how to remove target node if source field value is empty in graphical Mapping.
Like if
MIddle name in source filed is empty, I would like to eliminate target field from out put XML.
Thank you
John

Hi Jhon,
If you want to remove all empty tags and you dont to complicate your message mapping, you can use a XSL, after the message mapping, to remove all the empty tags:
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
 <xsl:template match="node()|@*">
 <xsl:copy>
 <xsl:apply-templates select="node()|@*"/>
 </xsl:copy>
 </xsl:template>
 <xsl:template match="*[not(@*|*|comment()|processing-instruction())
 and normalize-space()='' ]"/>
</xsl:stylesheet>
Regards

Calculate a measure depending on the value of other dimension

HI,
I would like to know if it’s possible to calculate a measure depending on the value of other dimension. I want to calculate this measure in the Business Model and Mapping. I show you how I am trying to do it:
http://img338.imageshack.us/img338/2496/imagenjp.png
But when I try to make an aggregation of this measure then I get an error of consistency.
I think a good example to make you to understand me is the function TODATE which calculates an aggregation depending on one time dimension. I would like to do the same thing but regarding to the value of other dimension.
Can someone help me? Thanks a lot.

Hi,
Do you have that dimension table as a "Sources" in that BMM folder? if yes, then you can use the "Data Type" option and click on "show all logical sources". Then click on your fact table using which you want to do the calculation and then use this formula. After that you can have the aggregation.
It should work.
Thanks,
Rohit

Hide Advance table Depending upon the value of dropDown

Hi,
I have 2 advance tables. 1st one has a DropDown. Depending upon the value of the dropdown in 1st advance table, the second advanced table should get rendered.
I tried by getting the value of the dropdown by addingg a PPF and iterating trough the table and I got the value. But when I redirect to the same page, all the selection and other values in 1st advanced table vanish out.
Can someone help me getting the 2nd table hidden and at the same time retaining the values for the 1st advanced table.
Thanks in Advance,
Kaushik Rambhiya

Kaushik
Implement PPR for this requirement and dont redirect the page
Displaying image based selected value of choice bean
http://oracleanil.blogspot.com/2009/05/ppr.html
Thanks
AJ

LabVIEW 8.6 propositions on how to build application that acts like reader form specified field dependent on which values been selected

Hello everyone!
I am newbie to LabVIEW with some previous experience programming in different languages.
My goal is to build the application that upon my selection needs to give specific values from previously filled and prepared file.
For example, I have different types of operations (milling, drilling, turning..) and different grades (type) of steels (Uddeholm steel grades: NIMAX, IMPAX...and about 40 of them). For every operation there are different input data (Coated insert, uncoated). Based of those information application should give out cutting speed and feed rate data that are stored in some file. I understand I can do it in Excel spreadsheet or LV spreadsheet, I would prefer LV because of portability to systems without Office installed on them. I also understand that all those issues concerning input data for output results I can easily solve with case scenario.
Main issue is decision between different types of files that I can easily address like 2D matrix to get required data, which and how to do it.
I would like to know what I should acknowledge first before doing any further work?
And does someone have some simply prepared VI on which I can work my way on?
If you are willing to help me with guides I would be happy to answer any of your questions.
Vedran Galeta

Thank you very much for your reply.
This application that I am working on is completely static due to communication. It simply needs to provide entry in table depending on selected inputs in front panel, and of course display it front panel. I know what I need to do, as well as the structure. Only thing that I don't know yet how to do it in LabVIEW.
When I mentioned "LV spreadsheet" I meant on read from file option, you got that right.. The thing is that now I have large amounts (not large in acquisition data point of view, 5 spread sheets, with 45 rows and 15 columns) of data saved in Excell, and my goal would be to get that data in LabVIEW application, for the ease of access. And still leave that xls file as is, due to all connections that he have with smaller xls files. So in compact version of the story I am going to use save as comma separated (or tab, that depends of course) values from Excell with or without extra editing of created file in order to load that file into prepared program structure in LabVIEW. After I manage to do that, of course I will work my way for all other extras that I am gonna put eventually in program structure. So this would be like a backbone, I know it sounds simple. As a matter of fact I would probably be finnished allready in VB but highest demand is to do this in LabVIEW, and I am fully down with that.
Regards,
Vedran

Difference between dependent list of values in table and form

Hi ,
Is implementing dependent lov in editable table i.e. in adf table different from implementing the same in an adf form.
In one of his posts Frank Nimohius mentioned that he can send us the implemented application for dependent list of values in editable table, if he reads this could you please send me the same.
Has anybody ever implemented depedent list in adf table.
Thanks and regards,
Raksha
Edited by: Raksha Sharma on 7 Jun, 2009 2:48 PM

Hi,
its already online: http://thepeninsulasedge.com/frank_nimphius/2008/04/08/adf-faces-building-adf-dependent-list-boxes-in-adf-faces-table/
Frank

Create multiple capture processes for same table depending on column value

Hi,
is it possible to create multiple realtime downstream capture processes to capture changes for the same table depending on column value?
Prakash

i found it - by using subset rules
prakash

How to create Graph display depends on input values/

hello,
I want to show moving line graph that changes depends on input values.
If I get input as wireless device receiving signal strength, I want to display the receiving signal strenth changes in graph.
Is it possible in java.
what class shall I use for this graph display.
pls give any information regarding this.

www.jfree.org

Exsistance of a node depends on a value of source field.

Similar Messages

Maybe you are looking for