Render link depending on calculated value of another field

I am using jdeveloper 11.1.2
I have table with many columns, and the last column contains commandLink
I want to render this command link depending on calculated function (FileExport.getTranslateFileName) using another fields in the table (row.SciId) as parameters
<af:column>
<af:commandLink" rendered="#{FileExport.hasTranslateFile}">
</af:commandLink>
</af:column>
how can I implement that without adding transient field?

yes FileExport is managed bean
DCIteratorBinding iterator = getBindings().findIteratorBinding("UpdateRequestDCIterator");
Row row = iterator.getCurrentRow();
Object sciIdObject = row.getAttribute("SciId");
but I don't know how to get the correct value of (row.SciId) for each row in my table
my code always return the same value for the first row

Similar Messages

PO Form with Terms & Conditions that Change Depending on a Value in Another Field

Hi - I have read through the relevant topics in this forum and have attempted several of them without luck. I am currently working on a form in which there is an empty JFMain (I do not want to populate fields on this page since I don't want things in this page my "static" header - logos, title, etc. since the Terms and Conditions pages should not show any of this.) On my page 2, I have subforms for all my fields except my Terms and Conditions. (These fields are controlled by a data file.) On my remaining pages I have 3 sets of Terms and Conditions - all about a page long - hard-coded as text and placed in subforms with a dummy field off page to ensure they print. What I want to do is print the subforms from page 2 and then the applicable terms from page 3, 4, or 5 depending on the value in a field located in one of the subforms on page 2. What I currently get is my subforms and then ALL my terms printing. Any thoughts?
My preamble overrides look like this:
^define group:D_HEADER \field$POSITION\reserve".11",in\subformHEADER.
^define group:G_HEADER @group:D_HEADER.
^define group:dummy!FldNotAvail \groupG_Terms_Private_Commodity
^define group:dummy2!FldNotAvail \groupG_Terms_Private_Services
^define group:dummy3!FldNotAvail \groupG_Terms_Public
^define group:JfEndData!EndData @group:D_end.
I had to place the JFEndData! statement into the Preamble since the last subform with fields called before the Terms subforms has a global field from another subform above it. For whatever reason, it was duplicating this subform after printing the Terms and Conditions.
I tried adding a nested if statement into field that will control when I want each subform to print but it was ignored. I also tried hardcoding a group call into the preamble with the logic as well with no results. If someone has example code they can share, this would be great.

I receive Adobe help forum posts via email and I've been saving a few for the pointers they contain. I have some saved that might help you out a bit...
A reply to the "Please can some one help me out......." post by Mr BoJangles on 10/29/2007 gives some information about forcing a subfield to be displayed.
A reply to the "Conditional logic" post by Marco Degl'Innocenti on 8/2/2006 gives information on initiating a subform based on the value of a field in the data stream.
A reply to the logic post by Marco DeglInnocenti on 2/22/07 also gives information on initiating a subform based on the value of a field.
I hope these can be of help. If you can't access them on the forum I can repost them.

Formula to populate one Person or Group column depending on the value of another Person Group column

I am looking for a way to popluate the Account information of a Person based on another column where there name in another column. I have Two Columns "Name" which is a Person or Group information type and User Account which
is also a Person or Group Information type. When an Invidividuals name is entered into the Name column, I what the User Account column to prepolulate.

Hi,
For your issue, you can automatically populate User Information depending on the value of another Person or Group column by connectting with User Information List or connectting with User Profile Web Service:
http://www.wonderlaura.com/Lists/Posts/Post.aspx?ID=172
http://blogs.technet.com/b/anneste/archive/2011/11/02/how-to-create-an-infopath-form-to-auto-populate-data-in-sharepoint-2010.aspx
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Field with a default value from another field

I need to populate a field as the default value from another field that the user inputs. I've tried the scripting that I found from the below Topic in the Archived Forums, but I'm not able to make it work. I've tried numerous variations and still to no avail. I tried to make the scripting work in Acrobat 6 and then decided that maybe I needed to upgrade, so I'm now trying it in Acrobat 8 with no results. Can anyone help?
Topic
Acrobat 5 - field with default value of another field
Ben PF - 03:31am Mar 23, 2007 Pacific
How can I have a field date2 which has the default value of field date1, but which can be edited by the user if necessary without changing the value of date1.
I've tried, but I just can't figure it out!
Any help much appreciated.
Ben
| Back to Topic List | Bookmark | Subscribe
To start a NEW discussion click on the Back to Topic List link and select Add Topic.
If you are in an archive forum please go up to the main topic list (archives are read only).
Messages
2 messages. Displaying 1 through 2.
First Previous Next Last Show All Messages
Gene Dianoski - 5:22am Mar 23, 07 PST (#1 of 2)
This, or some variation of this, should work:
if(this.getField("date2").value == ""{
this.getField("date2").value = this.getField("date1).value;
| Bookmark back to top
Ben PF - 6:49am Mar 23, 07 PST (#2 of 2)
Thanks very much.
I put it in at document level to start, but it didn't run the script automatically when date1 was first filled in, so I have put it in as a mouse exit action in date1 and it works a treat.
Thanks for your help.
Ben

Okay forget what I posted above and lets start over. Go to your first field and under Properties -> Actions Tab -> Select Trigger -> On Blur Run A JavaScript.
Put this:
this.getField("myField2").value = event.target.value;
Make sure that you replace ("myField2") with the actual name of your second field. I just tested this and it works for Acrobat version 6.
I haven't been doing as much javascripting as I used to, so sometimes I too make some basic mistakes.

Fields required based on a value in another field

Hi,
I am looking to have fields required (Annual Revenues and # of Employees) based on the value of another field (Ownership). Basically, if the value is Public the user is required to enter the Annual Revenue and Employees fields. I thought about using dynamic layouts but the only key field for Accounts is Account Type.
Thanks,
Caryn

Hi Caryn!
I think it is not possible for making #Employees and Revenues required depending on Ownership(as it is a look up field).. it should be possible if you want to do it on any other criteria other than ownership by just renaming the Account Type, Disable all the values of Account Tyope add new values to Pick List and make it driving picklist upon your requirements..
If you require Account Type, create a custom picklist "Account-Type" and add the values.

10.1.3--Disable a field according to values of another field.

Hi,
I am trying to set a filed on the JSP to be disalbed according to values of another field.
eg. When the value in "ID" field is NOT 10 or 20, the "Bill" field should be disabled.
I have tried using only one condition which is when "ID" != 10 or "ID" != 20. They work fine. But when I try to combine two conditions together using "&&" sign, I got a syntax error. The JSP does not display at all. I asked an expert about it, the answer is:
#{(bindings.Deptno.inputValue.value !=10) &&(bindings.Comm.inputValue.value > 1000)}. I tried this on my application and got the same syntax error.
Has anybody had a similar situation? Any idea what could be wrong? Thanks in advance.
Annie

Hi bsalvador,
I've had a simular situation once where I needed to make items disabled or required depending on a workflow step and on depending on other page items. Basically the disabling of items is done by javscript, keep in mind that readonly is not the same as disabled. When you use readonly, the item can still be manipulated with javascript. When you disable an item, the item is not even submitted to the database, so you have to make sure that your submit process can hadle that.
There are two different situations:
First you have the page load / page submit, there you can use PL/SQL to check which items should be submitted, hand them a javascript class or make them readonly/disabled straight away.
Second you have a situation where you want to disable certain items depending on the value of other items. This is done 'on the fly' and should be handled with a javascript function.
Keep in mind however that javascript runs client side and isn't a secure way to handle data integrity, so you would need a database process to validate which items need to be submitted as well.
Regards,
Vincent Deelen

How to expand rows in a table by calculated value of a field

Hi,
I'm trying to set the rows of an expandable table to follow the calculated value of a field.
The calculated field comes from two date fields that calculate the number of days and I want my table/row to expand based on that number..
Is is possible? Right now I have a button that does add an instance "Admin_Use.Table3._Row1.addInstance(1);" but I want it to be triggered by the calculated field instead...
Thank you so much!!!!

Hi Niall,
Thank you for your reply. I'm still a bit puzzled as right now I have this code in my calculate field (see below) under the calculated event and I'm not sure how to insert the code you sent me as I keep getting syntax errors. Any help will be greatly appreciated!!!
if (HasValue(Nights.FirstNight) & HasValue(Nights.LastNight) ) then
    if (Date2Num(Nights.LastNight, "YYYY-MM-DD", "en_IE") >= Date2Num(Nights.FirstNight, "YYYY-MM-DD", "en_IE")) then
        $ = Date2Num(Nights.LastNight, "YYYY-MM-DD", "en_IE") - Date2Num(Nights.FirstNight, "YYYY-MM-DD", "en_IE") + 1
else
        xfa.host.messageBox ("The first night cannot be after the last night", "Nights Covered", 0)
        Nights.LastNight.rawValue = null
endif
else
endif

Exsistance of a node depends on a value of source field.

I need to do graphical mapping such that the exsistance of a node in target side depends upon the value of a field in sorce side. Can some one tel me how to proceed?

Hi Pooja,
use can use"createIf" function.Ur problem will be solved
check here how to use createIF function...
/people/stefan.grube/blog/2006/01/09/the-use-of-suppress-in-the-xi-30-graphical-mapping-tool
Read this http://help.sap.com/saphelp_nw04/helpdata/en/d9/3033f96c79674f90e3ab8d101a595b/content.htm
And check these threads
Createif node function
Regards
BILL
<b>**reward with points if it helps u!!</b>

Copying a Calculated Field Value to another Field in the same List

Hello! I have a calculated field that uses an if statement to determine a score. IE A field called Downtime Score contains this calculate: IF Downtime Minutes =10, 100. (not correct formatting, just basic to get point across)
I simply want to use a workflow to copy the calculated value in Downtime Score (100) to another field called Final Downtime Score.
In the workflow, I current have the following: Set FinalDowntimeScore to CurrentItem:Downtime Score
When I log both to workflow history, they both show 0 in history. Nothing is copying.
The calculated field is a number and I tried both number and text fields for FinalDowntimeScore.
This is within SharePoint 2013 and using SharePoint Designer 2013.
Any help would be appreciated!

Ok, I did the same test as you and it failed. I still return a 0 when I should see a 100.
Not sure if this helps but when even though we are using sharepoint designer 2013, we only have "SharePoint 2010 Workflow" available in Platform type when creating workflows.
Could you test again using SharePoint 2010 workflow as your platform type and see if you return the same results?
Thanks!

Change value in a field and reflect value of another field

Hi all,
I have a situation here where in the Single Customer View, under the Completed Task. When I changed the value of a field name called Status to "Completed" in the Edit screen and I save it, another field that is in the same screen called "Completed Date" will auto populate the current date as value. may I know how do I achieve this?
Thanks and appreciate for help
Regards,
Anson

Hi !
You've got to create a workflow rule on Activity with the event trigger Before modified record saved.
The condition will be like this :
*[<Status>]=LookupValue("EVENT_STATUS", "Completed") AND [<Status>]<>PRE('<Status>')*
Then the action of this rule will update the field *"Completed Date"* with the value Today().
But you don't have to do it for the completed date field, because it's already filled automatically when you change the status to completed.
Hope this will help, feel free to ask more !
Max

How to populate the calculated value into screen field.

I am doing one enhancement in QM.I have added one custom screen to notification transaction ( QM01/QM02/QM03) transaction tab strip control using the enhancement QQMA0001.The Details of the calling and called screens as shown bellow
The Calling screen: SAPLIQS0
Screen Number: 7790
Screen Area :USER0001
Called Screen: SAPLXQQM
Screen Number: 0101
I have developed the Custom Screen in screen 0101 and called in PBO of program SAPLIQS0 7790 screen.
The Screen in calling perfectly .The Custom screen having different fields like Raw cost, Intermediate cost, Finished cost, SCAR Cost and Sales Order Cost Etc... These fields are out put filed types. No input for these screens.. I have few doubts regarding this
How to populate the calculated values in Custom screen?
Where we wrote the code to populate the calculated values in custom screen?
You have any idea please guide me
Thanks & Regards,
Samantula

As your screen fields should be global variables in SAPLXQQM, you may initialize them by implementing function module EXIT_SAPMIWO0_008 which also belongs to SAPLXQQM (Customer Exit: Transfer Notification Data to User Screen)

Passing values to another field in APEX form

Hi,
How do I pass a value in 1 field to another field in APEX form ?
I have a hidden field and I need to populate this field by another field.
thanks

I found the solution to my problem.
[1] Create a "After Submit" under Computations.
[2] Select 'Item Value' under Type in Item Name
[3] Select "After Submit" under Computation Point
[3] Enterer Item Name, which value needs to be passed in 'Source'
thanks

Repeating a value in another field

I would like to make a field in a column equal to an amount previously entered in another field and am not familiar with Java Script. I will be using this field in a column that I will total at the bottom.
Using Acrobat Pro 9. Thanks in advance.
Reg

There are a number of ways to do this. The simplest is to simply give both fields the same name and the values will automatically be the same. This isn't always possible, for example if you want one field to be read-only and the other not. If that's the case, you can use the following custom Validate script for the first field:
// Custom Validate script
// Set the value of Text2 to this field value
getField("Text2").value = event.value;
Finally, you can use a custom calculate script for the second field that is:
// Custom calculate script
// Set this field value to the value of Text1
event.value = getField("Text1").valueAsString;

Disabling button depending on the Value of a field in a standard page

Hi,
How can I disable a button depending on the value selected in a particular field of the same page? Is it possible to do so in a Oracle standard page? Please guide me in resolving this requirement.
Thanks,
Swagatika

Swagatika,
You can attach PPR event to the textinput field and use method
pageContext.ForwardImmediatelyToCurrentPage().As process request method will be called again,here you can use method setDisabled(boolean) in OAsubmitButtonBean, to enable or disable your button!
--Mukul

Automatic population of search help value to another field in module pool

Hello there,
I am developing a module pool screen, in which i have a table control field with fields PERNR and ARBPL along with other fields.
I have to give a search help for Pernr first field for which i have given a search help with the use of PM02 search help, given in the screen field level, in the same search help there is another field ARBPL, when the pernr is selected i have to get the corresponding Arbpl field value in the search help hit list and pass it to my field arbpl in my table control.
I tried with POV event as well with FM f4if_field_value_request but the return structure always filling one value only PERNR.
Is there any chance to get the both field values from the search help.
Thank you in advance.
Regards,
Kumar.

Try the following logic in your table control, in table control you have get the selected index using function DYNP_GET_STEPL.
TYPE-POOLS: shlp.
PARAMETERS:p_matnr TYPE marc-matnr,
           p_werks TYPE marc-werks,
           p_ekgrp type marc-ekgrp.
TYPES:BEGIN OF ty_marc,
      matnr TYPE marc-matnr,
      werks TYPE marc-werks,
      ekgrp TYPE marc-ekgrp,
      END OF ty_marc.
DATA:i_marc TYPE TABLE OF ty_marc,
     i_val TYPE TABLE OF ddshretval,
     wa_val TYPE ddshretval.
DATA:wa_dynpfields TYPE dynpread,
    i_dynpfields LIKE STANDARD TABLE OF dynpread.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_matnr.
SELECT matnr werks ekgrp FROM marc INTO TABLE i_marc UP TO 100 ROWS.
CHECK i_marc[] IS NOT INITIAL.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield         = 'MATNR'
      value_org        = 'S'
      callback_program = sy-repid
      callback_form    = 'CALLBACK_ROUTINE'
      dynpnr           = sy-dynnr
    TABLES
      value_tab        = i_marc
      return_tab       = i_val
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS           = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT i_val INTO wa_val.
    IF sy-tabix = 1.
      wa_dynpfields-fieldname    = 'P_MATNR'.
      wa_dynpfields-fieldvalue   = wa_val-fieldval.
    ELSEIF sy-tabix = 2.
      wa_dynpfields-fieldname    = 'P_WERKS'.
      wa_dynpfields-fieldvalue   = wa_val-fieldval.
    ELSEIF sy-tabix = 3.
      wa_dynpfields-fieldname    = 'P_EKGRP'.
      wa_dynpfields-fieldvalue   = wa_val-fieldval.
    ENDIF.
    APPEND wa_dynpfields TO i_dynpfields.
ENDLOOP.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
    EXPORTING
      dyname     = sy-repid
      dynumb     = sy-dynnr
    TABLES
      dynpfields = i_dynpfields.
FORM callback_routine TABLES i_val TYPE ddshreslts
            CHANGING wa_shlp TYPE shlp_descr
                     wa_callcontrol LIKE ddshf4ctrl.
DATA:
    wa_intf     LIKE LINE OF wa_shlp-interface.
wa_intf-shlpfield = 'F0002'.
wa_intf-valfield = 'X'.
wa_intf-f4field = 'X'.
wa_intf-value = '~'.
APPEND wa_intf TO wa_shlp-interface.
wa_intf-shlpfield = 'F0003'.
wa_intf-valfield = 'X'.
wa_intf-f4field = 'X'.
wa_intf-value = '~'.
APPEND wa_intf TO wa_shlp-interface.
ENDFORM.                    " CALLBACK_F4

Render link depending on calculated value of another field

Similar Messages

Maybe you are looking for