Extension fields in forms using Adobe LiveCycle Designer and SAP Cloud Application Studio.

Hello everyone,
I am new to using SAP Cloud Application Studio and am currently working on forms.
I have created some extension fields in the dunning letter form message type : FormDunning Notification.
Upon activating, the extension fields do show up in backend form data type structure.
However i am unable to find the fields in the front end form under Form Template Maintenance.
I have tried opening form with open editor as well as downloading template and opening in Adobe LiveCycle Designer .
After creating the data connection in adobe ,the first field (ProjNumDun ) do appear in correct place in data view.But i cant find the rest of the fields.
Any help,guidance and suggestion will be really appriciated.
Thanking in advance,
Kamakshi

Kamakshi,
First, any extension fields added must be explicitly assigned to appear on the forms. Through Front-end Adaptation, this would be via the "Further Usage" link. Within the SDK, you'd right-click the XBO and select "Enhance Forms" (which would take you to the same screen as you'd end up at in through front-end").
You must select "Add Field and Edit..." to actually assign it to the Form Template schema.
Once this step is done, re-download the Form Template, and make sure to reload the Data Connection within LiveCycle. Through there, you should see your fields. You'll likely have to dig for them - they appear at the very end of the child elements.
Note that, while fields added through the front-end have a long string appended to the end (for example, it would appear as "ExtensionField_1234AISU897234HJA" if added via front-end adaptation), the fields added via the SDK do NOT have the suffix (you'll be looking for an element with JUST the field name, i.e. "ExtensionField")

Similar Messages

  • DateTime field in forms using Adobe LiveCycle

    Hi Everyone,
    Iv'e created a custom report and has difficulty in formatting the DateTime fields where I wanted to show "EST" timezone but the report is setting it to "GMT". I'm not sure where to configure the timezone in Adobe LiveCycle when the data that I'm using already has an EST timezone. This is the pattern that I'm using date{MMM D, YYYY} time{h:MM:SS A Z}. Do you have any suggestions? Thanks.
    Regards,
    Rajiv

    one See this link,
    http://wiki.scn.sap.com/wiki/display/Basis/Timezone+changes+best+practices
    i hope this is usefull...
    thank you,
    Nithin

  • SAP Cloud Application Studio 1502 UI Designer proxy error

    Hi,
    When starting the UI Designer in SAP Cloud Application Studio 1502 I got the following error:
    Exception Message: XRepositoryException (0)The remote server returned an error: (407) Proxy Authentication Required.
    InnerException Message:XRepositoryException (0)The remote server returned an error: (407) Proxy Authentication Required.
    Source Type: SAP.BYD.LS.UIDesigner.Connector.XRepositoryProxy
    Machine Name: DEHEDEV1
    TimeStamp: 10.02.2015 16:42:42
    Application Version: 25.0.555.1045
    Windows Identity: GLOBAL\p-baurf
    Stack Trace:    at SAP.BYD.LS.UIDesigner.Connector.XRepositoryProxy.QueryFolder(String FolderName, List`1 Filter, String RecursiveMode)
       at SAP.BYD.LS.UIDesigner.Connector.XRepositoryProxy.QueryFolder(String FolderName, List`1 Filter)
       at SAP.BYD.LS.UIDesigner.Model.RepositoryLayer.ProjectWorkspaceManager.ExpandXRepositoryNode(FolderNode parentNode, List`1 componentFilter)
       at SAP.BYD.LS.UIDesigner.Model.RepositoryLayer.ProjectWorkspaceManager.GetRepositoryRootNode()
       at SAP.BYD.LS.UIDesigner.UICore.Toolwindowcontrols.VisualConfigurationExplorerControl.Init(Dictionary`2 DesignerProviders)
    So my question is, where can I configure the proxy settings for UI Designer? It seems that the general proxy settings in the studio (Tools -> Options -> SAP -> General) aren't used by the UI Designer.
    Kind regards
    Florian Baur

    if the error is different from this
    yes, raise an incident

  • I have downloaded a trail version of adobe acrobat pro and when I try to use it, it says that it cannot be edited in acrobat, please use adobe livecycle designer to edit this form. I can't work out what I need to do?

    I have downloaded a trail version of adobe acrobat pro and when I try to use it, it says that it cannot be edited in acrobat, please use adobe livecycle designer to edit this form. I can't work out what I need to do?

    Acrobat XI is not distributed with Designer. Designer is now a separate product. You can create forms in Acrobat as an AcroForm or using Forms Central (an online forms program). You can print the form to a new PDF and then recreate the fields in Acrobat using the recognize form fields. You will likely have to fix the form fields, but that would be the process. Generally, once a form is taken to Designer, you can't bring it back without such steps.
    Designer is available with AA8 - AAX, but since is a separate product as I indicated.

  • We were using Adobe Livecycle Designer 7.0 for creating forms, what is new product replacement?

    We were using Adobe Livecycle designer 7.0 (circa 2004) for creating our own dynamic forms.  The program has since failed to work, we cant locate the old disk.  What is the new product replacement that will allow us to build new forms from scratch with our own fields and data collection?

    LiveCycle Designer no longer comes with the Windows version of Acrobat Pro, but it can be purchased separately (soon): http://www.adobe.com/products/livecycle/tools/designer.html

  • I have adobe xi pro, but i can´t edit a form create with adobe 8.0, the message is this form can´t be edit with adobe, use adobe livecycle designer. need I to buy another program?

    I have adobe xi pro, but i can´t edit a form created with adobe 8.0. The message is: this form can´t be edit with adobe, use adobe livecycle designer. need I to buy another program?

    If the form was created using LCD then it can only be edited there. This
    application used to be bundled with Acrobat Pro, but that's no longer the
    case. So if you want to edit this file then you need to purchase it, yes.
    On Sat, Apr 4, 2015 at 6:39 PM, monicad4417911 <[email protected]>

  • Embed webquery in PDF using Adobe LiveCycle Designer

    Dear BI Gurus,..Pls. help !!!!
    We have  NW2004s with Portal and ADS installed
    Is it currently possible to embed BW objects like query results and Documents into PDF, may  be using Adobe LiveCycle Designer to design a pixel-perfect layout?
    So for e.g. an A4 size PDF would have several query results and may be also a document or a chart , and these objects can be manually arranged in A4 size layout.
    Is there an option to achive this by some kind of webdynpro programming?
    I would give best points to you !!
    Thanks in advance

    Kamakshi,
    First, any extension fields added must be explicitly assigned to appear on the forms. Through Front-end Adaptation, this would be via the "Further Usage" link. Within the SDK, you'd right-click the XBO and select "Enhance Forms" (which would take you to the same screen as you'd end up at in through front-end").
    You must select "Add Field and Edit..." to actually assign it to the Form Template schema.
    Once this step is done, re-download the Form Template, and make sure to reload the Data Connection within LiveCycle. Through there, you should see your fields. You'll likely have to dig for them - they appear at the very end of the child elements.
    Note that, while fields added through the front-end have a long string appended to the end (for example, it would appear as "ExtensionField_1234AISU897234HJA" if added via front-end adaptation), the fields added via the SDK do NOT have the suffix (you'll be looking for an element with JUST the field name, i.e. "ExtensionField")

  • Read Only HTML Forms using adobe livecycle Output ES

    Hi,
    We have a requirement to display the adobe html forms in read-only format. got to know from adobe consultants that Adobe Livecycle Output ES has this feature. but i am not able to find out any services or components that would give me this functionality.
    Is there a way to get these readonly forms using Adobe Livecycle Output ES.

    Dear Dfoto,
    Thank you so much for being so kind to spend the effort and reply back, I though my question was left behind the sun... but now I am very happy in deed.
    To be more specific, the Form has 2 parts. The first part "Subform1" any one can fill and sign.
    The second part "Subform2", only certain users can fill and sign.
    I think I found a very strong lead to my solution, when I was playing with LiveCycle Desinger few days ago.
    On the Singature Field Advanced Setting, there is a place you can attach the public part of a certificate (Digital Signature) of any user, one or more.
    In this part, you tell LC that only those users "signing parties" can sign the field. I tested it and it worked.
    Now, if I can use this feature via JavaScript to find out if the user who is filling the form, can sign this field, then he can fill the form. If he cannot sign the field, then he cannot fill the form. I can do that by setting the "access" property of the Subform. Another solution is that I can prevent the user from hitting the "Submit" button unless he signes the designated Signature Field.
    I have another small issue:
    I found out that if the Signature field is part of a repeating dynamic Subform, it will not work during run-time. Very bad in deed. While I cannot understand why ?, I tool this as "By Desing" feature.
    Now, if the Signature is locking parts of forms which has dynamic content (repeating subforms), it will always show somthing like "Signature is corrupted or form was changed after it was signed".
    Is this normal ? Is there a way to control Dynamic Forms using Digital Signatures without such annoying issues ?
    Thank you.

  • How to give reader extensions to a form created with LiveCycle designer

    Hello,
    I make forms with "Adobe LiveCycle Designer ES 8.1" and then I give them somes rights.
    I use the link http://172.16.1.35:8080/ReaderExtensions/index to give my forms rights, like (Basic form filling, Import and export form data, Submit outside web browser, Digital Signatures)
    Since 2 weeks, this link doesn't work. I called Adobe Belgium and give them my licence key and they couldn't help me becasue they sayed that it's an old application.
    Can someone help me please, it's an emergency.
    Thanks a lot.

    Hi,
    Why do you need to change the connection string? What are you calling "connection string for a form"???
    The only connection string I now about is the one used to connect to the UI API... and this one is fixed for all apps in debug mode and given as parameter when your addon is registered in B1.
    The connection string is filled in the code of your generated addon.
    Please go to the main class of your addon, in the main method you have the following code where the connection string is filled either with the command line parameters (release mode) or with the fixed value given by SAP. This code doesn't need to be changed...
            public static void Main()
                int retCode = 0;
                string connStr = "";
                bool diRequired = true;
                // CHANGE ADDON IDENTIFIER BEFORE RELEASING TO CUSTOMER (Solution Identifier)
                string addOnIdentifierStr = "";
                if ((System.Environment.GetCommandLineArgs().Length == 1)) {
                    connStr = B1Connections.connStr;
                else {
                    connStr = System.Environment.GetCommandLineArgs().GetValue(1).ToString();
                try {
                    // INIT CONNECTIONS
                    retCode = B1Connections.Init(connStr, addOnIdentifierStr, diRequired);
    Regards
    Trinidad.

  • Trouble connecting to https secure web service using Adobe Livecycle Designer

    I am attempting to use Adobe Livecycle Designer ES2 to create a data connection in a Form to a secure (https) web service and I'm having some difficulty.
    I'm new to Livecycle and have tried searching online for an answer, but the help isn't very clear and the only tutorials online that I can find are ones that connect to non-https services.
    The WSDL I'm trying to connect to is: https://uk.ws.ondemand.qas.com/ProOnDemand/V3/ProOnDemandService.asmx?WSDL
    My questions are:
    Q1. Does Adobe Livecycle support https web service connections? The following link suggests that this isn't possible: http://books.google.co.uk/books?id=yOOcM3Bn4BAC&pg=PA179&lpg=PA179&dq=secure+web+service+w ith+adobe+livecycle&source=bl&ots=jm1GIZflOJ&sig=uLfv5Xda4eXXJl5o_7vBViwU-w0&hl=en&sa=X&ei =WLvIT5P4OujW0QWmv7nDAQ&ved=0CI4BEOgBMAk#v=onepage&q=secure%20web%20service%20with%20adobe %20livecycle&f=false
    Q2. I've managed to consume the WSDL but can only see the body of the XML request for a particular SOAP action. Where can I add the username/password credentials? I've selected "Requires Message-Level Authentication" during the new connection wizard, but it doesn't prompt me at all for these details.

    Hi,
    I tried using SOAP.Connect too..
    But I am facing the same problem.
    Any solution found yet?
    Rgerads, Amith

  • Adding Barcode to Adobe Form using Adobe LifeCycle Designer

    I am hoping someone can help me. I have created a PDF form and have added 2 3-of-9 barcodes to the form using Adobe LifeCycle Designer version 8.0. I see the barcodes when I prin tthe form from Adobe but when I run my web page to print out the form using pdf, only the default value shows on the printed form, no tthe barcode as expected? Do I need some other software?
    Thanks in advance
    D

    Hi Vasu,
    Yes you can add fonts on ADS.
    Adobe document services require access to fonts that are installed with the Font Manager Module. This module contains a number of Adobe bundled fonts installed in
    "/usr/sap/<SAPSID>/JC<xx>/j2ee/os_libs/adssap/FontManagerService/fonts/adobe".
    You can also add fonts obtained from other vendors. The types of fonts you can add are OpenType® (.otf), TrueType® (.ttf), and PostScript® Type 1 (.pfb/.pfm).
    Procedure
    To add fonts:
    1. Create a subdirectory called fonts below the
    "/usr/sap/<SAPSID>/SYS/global/AdobeDocumentServices/ FontManagerService" directory.
    Enter JC<xx> if your system is a SAP Web AS J2EE system.
    Enter DVEBMGS<xx> if your system is a SAP Web AS ABAP + J2EE system (J2EE Add-In).
    2. Create a subdirectory called customer below the fonts/ directory created in the previous step.
    3. Copy your fonts into the "/usrsap/<SAPSID>/SYS/global/AdobeDocumentServices/ FontManagerService/fonts/customer" directory.
    4. Restart the Document Services Font Manager for the changes to take effect.
    5. Also restart the application com.adobe/AdobeDocumentServices for the changes to take effect.

  • Adobe LiveCycle Designer and Office 2010

    Hi guys,
    I'm using Adobe LiveCycle Designer (version 9 / ES2). I try to open a MS Word file, but I receive an error message.
    Word (version XP or higher) cannot be found on the machine.
    OS: Windows 7 Enterprise
    Office: 2010
    I read that the version 8.2 of LiveCycle Designer doesn't work with Office 2007 and higher. In this constellation the same error message appears. Is it the same problem on my side? How can I solve it?
    Many Thanks,
    untalentiert

    I'm running Win XP using Parallels 8... LiveCycle Designer is WIndows only and Acrobat XI will only import hyperlinks correctly from Windows versions of Office - which is why I use Office on both the Mac and Windows side, as well as Acrobat XI on both platforms. You can't use the Office plug-ins for Office using LibreOffice (or even Office 2011 for Mac) hence the need to open docs in Word on the Windows side instead of the Mac side.
    What I'm confused by is the pricing difference between the packages - I guessing that the $163 package is the 'full retail' and not an OEM or anything - but I don't know if an OEM would even work under a VM with Parallels...
    So I may end up with the full retail version, although I'd like to save the $70 difference if I can!
    Thanks,
    Clinton

  • Form in Adobe LiveCycle Designer

    Good Morning,
    I have two doubts.
    1) If i want use the software(Adobe LiveCycle Designer)  for create process in HR, the company have that buy the licence for this program?
    2.) In the company want that the manager can  request change of personnel through of form HCM Processes and Forms and HR Administrator(Adobe Forms) in the MSS.
    The personnel  action in the system ECC trigger dynamic action  and the system do validations and call other infotype for this validations.
    The question also is: In the portal this validations are called?
    Kind Regards,
    sanew2

    Good Night Suresh Datti,
    I have the following doubt.
    The company want that the Manager can request change of personnel through of the MSS.
    I don't know if this can be posible.
    The process that want is the following:
    1) Manager request the change of personnel.
    2.) The HR administrator in the UWL approve the request and that this run automatically the action of personnel in the system ECC update each of the infotype involved in action.
    3. For the company There are is personnel action that display several infotype ie 0008 to be update depending on the personnel area of the employee, This process how can do using HCM P&F?
    Kind Regards,

  • Howto  developed an interactive form using Adobe LifeCycle Designer

    how to developed an interactive form using Adobe LifeCycle Designer

    Hi,
    Take a look at the Howto page.
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/was?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d">examples</a>
    There you will find a sub group about Interactive forms.
    Hope it helps.
    Kind regards,
    Maarten.

  • Adobe LiveCycle Designer and send XML

    Dear all,
    I have developped a PDF with Adobe LiveCycle Designer  that send an XML file to BW using a button Submit. But this PDF works when executed from the Adobe LiveCycle Designer software (tabpstrip PDF preview) but does not work when it is executed standalone (no logon asked.. )
    Do you have some ideas to solve this problem ?
    Regards,
    Vince

    Hi Nitesh,
    I have installed ADL standalone on my pc.
    When I execute my PDF from ADL it works : I click on a button and a logon screen on a SAP system is shown (like access on web report), I fill it and the XML file is sent and shown through RSA3 transaction.
    But when I launch the PDF alone, I get an error message when I clik on the same button : 'HTTP 401 - Unauthorized'.
    Do you have another clue ?
    Regards,
    Vince

Maybe you are looking for