External Web Services as simple ABAP Proxy issue

Hi,
I'm a bit confused upon the subject. I'm testing a scenario where I want to call directly an external webservice from ABAP ( No XI in between for the moment : I'm using a client on the XI box that is set as 'Application system' . This is the only 6.4 client that has outbound HTTP access to the domains required )
I have for 2 test web services a WDSL file . Via SE80, I've created ABAP proxies for them :
For 1 of both ( requiring no authentication on the server side ), this works ok ( and doesn't require any further related setup such as SLD etc...). This seems completely transparant for the Xi box : No messages in SXMB_MONI , as I was expecting
For the other one ( requiring authentication on the server side but I don't know if related ), I'm getting a logon box to log on to integration server + subsequently 'Receiver could not be determined' error.
I also have messages in the monitor.
What could trigger this, unwanted, XI flow ? How can it be different for the 2 webservices.
I do have a 'half-working' integration scenario pending for the second service, with XI in between as this is my final goal , but I don't see how I can influence it :
It uses other interfaces names etc..Only the target webservice URL also occurs somewhere on a communication channel from this scenario,
Any ideas ?

OK, I found it : I forgot to create a logical port for the second webserivce !

Similar Messages

Consume an external web service with an ABAP proxy

Hello,
I'm working on creating an ABAP Proxy to consume my first web service. In searching SCN I haven't found a comprehensive list of steps to complete the process, but I have found information on generating a proxy from a WSDL and creating a logical port.
My first issue arises when I go to SPROXY to generate a proxy from a WSDL, I see the message 'Local objects only (No Connection to ESR)', and I have no ability to 'create'. The Enterprise Service Repository seems to be the new name for the Integration Repository, if that helps. Do I need the ESR installed to create a proxy?
A follow-on question, assuming I do need the ESR, would be what do I do with it? It appears to serve the purpose of design for interfaces, messages, and mapping, but I thought that happened when I created a proxy in SPROXY.
We're on ECC 6.0, with a 702 / 0007 basis release. I appreciate and light you can shed on the topic.
Thanks

ESR is part of the PI system, and it is where all interfaces details are stored.You could create an ABAP Proxy from a pre-defined WDSL yet stored in PI as part of some communication, but you can also import directly a WSDL from a local file or even from a URL.
ABAP proxy generates a proxy class and a set of abap structures , fields and data elements. Simply by filling the data and call a method in the proxy class (depends of syncrhonization a different method name) you can consume your service. No PI is needed if you use the local option.
There is a very good Tutorial from Thomas Jung. I'll try to find it.
http://scn.sap.com/people/thomas.jung/blog/2005/05/13/calling-webservices-from-abap-via-https
Here you have a lot of tutorials
Best regards

Web Service consumer using ABAP-PROXY

Hello,
I want to test Web Service consumer using ABAP-PROXY . So I do what is explain in the weblog :
[http://wiki.sdn.sap.com/wiki/display/Snippets/WebServiceconsumerusingABAP-PROXY]
But when I execute the programm, the message : 'No valid source context supplied'.
But, proxy and port are ok and activate.
Can you help me.
Thanks.

Hi Jitesh,
Thanks for the link. I checked but did not find helpful info there.
I have managed to make it work yesterday. Two issues were identified.
1. The namespace in the WSDL file imported into ESR as an external definition. I need to create the same namespace in ESR before importing the WSDL and then import the WSDL into that namespace.
2. The authentication method. The authentication method in the IIS configuration of the .NET web service has to be set to Basic Authentication. Then I set logical port of the consumer proxy in the OSAMANAGER to use Basic Authentication also. So far only the Basic Authentication works in my test scenario.
I am closing this question.
Regards,
Jiannan

Consume External Web Service (WSDL) in ABAP (Release 700) - Proxy Error

Hi All,
Have a requirement to Consume an External Web Service in ABAP. We have the WSDL for Ext. Web Service.
Did some research and came across the link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/69/8a1e9553dc4baba6026a3db510cadb/content.htm
First tried to generate a 'Consumer Proxy'. Since external WSDL, used SE80 to generate the Consumer Proxy.
But finally got Error Msg 'Incorrect value: XSD name space not available'! Could you please let me know:
1) What is causing this error and how to rectify it?
2) Is it possible to view the Proxy that I had created (which is in error)? is there a Proxy Editor?

Hy Brad, I got the same error by trying to generate a 'Consumer Proxy' from a external WSDL. u2019Incorrect value: XSD name space not available'. I have solved it in this way: The report RSSIDL_DESERIALIZE_DEMO has the same check routines as the R3-Proxy Generator. I debugged this report using a saved external WSDL and compared it with using a saved WSDL (Server) generated under /nse80.
-> In the WSDL, in part message the "type" isnu2019t allowed, because the dezerialization is done already.
Coding, not working:
<xsd:complexType name="OrderRequestMsg">
<xsd:sequence>
     <xsd:element name="shop" type="xsd:string"/>
      u2026
</xsd:sequence>
</xsd:complexType>
<message name=" OrderRequest">
<part name="input" type=" tns:OrderRequestMsg"/>
</message>
Coding, working::
<xsd:element name="OrderRequestMsg">
    <xsd:complexType>
       <xsd:sequence>
        <xsd:element name="shop" type="xsd:string"/>
   </xsd:sequence>
</xsd:complexType>
</xsd:element>
<message name="OrderRequest">
     <part name="input" element="tns:OrderRequestMsg"/>
</message>

Help needed with process to call an external web service from within ABAP

Hello,
I have an understanding of how I can provision web service from within SAP so that it can be consumed by external apps.
Now, I am in need to know the, how I can call an external non-sap web service (let's say a java application) or even a public domain web service for that matter:
Is there any lay man's guide out there? which will list following step:
A sample ABAP program calling an external web service
List of all the configurations needed within SAP to make this happen (calling an external web service).
Any help will be greatly appreciated.

Hi Matesh,
Please use the following command in Google : site:sdn.sap.com abap consuming web service
There is many samples of your needs on SDN.
Like this one :
http://wiki.sdn.sap.com/wiki/display/Snippets/WebServiceconsumerusingABAP-PROXY
Regards, Gilles.

Proxy error when consuming External Web Service (WSDL) in ABAP

Hi all,
I am trying to consume an external WS in ABAP but I have some issues :
1. Is it allows to use tag <xsd:complexcontent> with restrictions and extensions in it ? If not, how can I replace it ?
2. Do we need to still change the <complexType> structure such as :
Coding, not working:
<xsd:complexType name="OrderRequestMsg">
<xsd:sequence>
<xsd:element name="shop" type="xsd:string"/>
u2026
</xsd:sequence>
</xsd:complexType>
<message name="OrderRequest">
<part name="input" type=" tns:OrderRequestMsg"/>
</message>
Coding, working::
<xsd:element name="OrderRequestMsg">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="shop" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<message name="OrderRequest">
<part name="input" element="tns:OrderRequestMsg"/>
</message>
3. When I am testing the WSDL they send me in SOAPUI, I don't have any issue but when I am trying to integrate in ABAP, it is blocking on an URL saying it cannot find it (the URL http://fk.se/SHS/xsd/tanden)
<xsd:schema version="20110317" targetNamespace="http://fk.se/SHS/xsd/tanden" xmlns:tns="http://fk.se/SHS/xsd/tanden" xmlns:xmime="http://www.w3.org/2005/05/xmlmime" elementFormDefault="qualified" attributeFormDefault="unqualified">
Do I need to change something ? Since when I am modifying it, it cannot find the type reference afterwards...
Thanks in advance for your answer.

Hy Brad, I got the same error by trying to generate a 'Consumer Proxy' from a external WSDL. u2019Incorrect value: XSD name space not available'. I have solved it in this way: The report RSSIDL_DESERIALIZE_DEMO has the same check routines as the R3-Proxy Generator. I debugged this report using a saved external WSDL and compared it with using a saved WSDL (Server) generated under /nse80.
-> In the WSDL, in part message the "type" isnu2019t allowed, because the dezerialization is done already.
Coding, not working:
<xsd:complexType name="OrderRequestMsg">
<xsd:sequence>
     <xsd:element name="shop" type="xsd:string"/>
      u2026
</xsd:sequence>
</xsd:complexType>
<message name=" OrderRequest">
<part name="input" type=" tns:OrderRequestMsg"/>
</message>
Coding, working::
<xsd:element name="OrderRequestMsg">
    <xsd:complexType>
       <xsd:sequence>
        <xsd:element name="shop" type="xsd:string"/>
   </xsd:sequence>
</xsd:complexType>
</xsd:element>
<message name="OrderRequest">
     <part name="input" element="tns:OrderRequestMsg"/>
</message>

Issue with calling an external web service using web service proxy

Hi,
I've created several web services using JDeveloper succesfully in the past, however I'm getting an issue with one that was working ok previously. Have spoken to the developers of the external web service and they say they haven't changed anything. Also if I test the external web service through soapUI for example it seems fine so it would seem that the issue is with the autogenerated code created by JDeveloper.
Basically I get the following exception as it sends the request to the external service:
java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Bad Authentication header format: 'Basic realm="Integration Server" encoding="UTF-8"'
Expected "," at position 33
The user name/password appear correct.
JDev version 10.1.3.42.70
Any ideas?
Many Thanks
Gary
Edited by: user10916721 on 08-May-2012 09:54

Found the answer. Basically I had one proxy web service working and one not both linking to a middle tier written in web methods. THe issue actually ended up being with the web methods code in that the one web service (that was not working) was put together using a backwards compatability mode. Once this was switched back then started working again in JDev.

External web service call from WebDynpro for ABAP

Hi...
I'm inspecting Web Dynpro For ABAP, and trying to call external web services.
I'm created Web Service, CAF-AS.
I create the proxy class(se80) and Logical Port(lpconfig), and I take the web service in componentcontoroller of my web dynpro using Web Dynpro Wiserd.
Though I expected the context to be registered by the same type as the service interface,
they are created strange structure as follow.
<Context>
CONTEXT
---FIND_BY_PARAMS
IMPORTING
INPUT
CONTROLLER
ORDER_TEXT_BY_PARAMS_REQ
---EXPORTING
OUTPUT
CONTROLLER
ORDER_TEXT_BY_PARAMS_RES
The CONTOROLLER is defined by the type PRXCTRLTAB, and
ORDER_TEXT_BY_PARAMS_* has deep structure, as follow.
ORDER_TEXT_BY_PARAMS_REQ
---CONTROLLER type:PRXCTRLTAB(structure)
---QUERY_TABLE type:ZTABLE_NAME
---QUERY_FIELD type:ZFIELD_NAME
---QUERY_OPTIONS type:ZORDER_TEXT_QUERY_OPTION_TAB
I want to use only service paralmeters, that is named query_*.
I tried to excute the webService but dump "OBJECTS_OBJREF_NOT_ASSIGNED" occurs.
I think I must set any value to CONTOROLLER,?but I have no idea What & How I should set value.
please let me know, what is the CONTOROLLER, and how to call external web services.
Regards,
Naoya Tsugo,

I solved problem by myself.
There was carelessmiss in activation of LP.
Now, I'm closing the topic.
Thanks and Regards.
Naoya Tsugo,

Use BizTalk 2006 as a proxy for an external Web Service

Hi
We have a solution that is going to work just as a proxy for an external Web Service.
It works like this:
1. We have a Request-Response receive port that receives the calls for the WS.
2. Different Static Solicit-Response ports that have filters for each method in the WS receive the requests and then send them to the external WS.
3. The response from the external WS is then sendt back to the caller via the Request-Response port in point 1.
This generally works like it should. The only problem i have is when the external WS returns a Fault message. I get this fault from the external WS:
<s:Fault xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"><faultcode>s:Client</faultcode><faultstring xml:lang="nb-NO">Some error message the caller should see.</faultstring><detail><GenericFault
xmlns="http://register.test.com/Common" xmlns:i="http://www.w3.org/2001/XMLSchema-instance"><ErrorCode>SomthingWentWrong</ErrorCode><Message>Some error message the caller should see.</Message></GenericFault></detail></s:Fault>
This message then failes on BizTalk and BizTalk returns this Fault message to the caller:
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><SOAP:Body><SOAP:Fault><faultcode>Microsoft BizTalk Server Negative Acknowledgment
</faultcode><faultstring>An error occurred while processing the message, refer to the details section for more information </faultstring><faultactor>/Hemit.BizTalk.NHN.Position.ws/IPositionService.asmx</faultactor><detail><ns0:NACK
Type="NACK" xmlns:ns0="http://schema.microsoft.com/BizTalk/2003/NACKMessage.xsd"><NAckID>{7AC314FE-2CA3-44AE-8208-180495500481}</NAckID><ErrorCode>0xc0c016b7</ErrorCode><ErrorCategory>0</ErrorCategory><ErrorDescription>There
is an error in XML document (1, 2).</ErrorDescription><ErrorDetail><Fault xmlns='http://schemas.xmlsoap.org/soap/envelope/'> was not expected.</ErrorDetail></ns0:NACK></detail></SOAP:Fault></SOAP:Body></SOAP:Envelope>
So the problem seems to be that the Request-Response port in point one will ONLY accept the real response that is specified in the response schema for that particular method, and not a Fault. And when it receives a fault, it generates its own Fault saying
a Fault message was not expected.
Does anyone know how i can be able to send the actual fault from the external WS all the way back to the caller on the inside?
I know how to do it with an orchestration, but can not figure out how to get it done just with the ports.
Kind regars
John Viggo

Hi John,
Enable Propagate fault message
on the WCF solict –response port.
For the two-way send port, you can choose whether to forward
SOAP fault messages on to the original caller over a solicit-response send port by selecting
Propagate fault message. If this option is not selected, BizTalk Server will generate a NACK. What you see is the NACK.
If it is selected, BizTalk Server will treat the message as a valid WCF response message from the external service and the response message will not be suspended because it is propagated.
Then you need to map the fault message to the actual response in the map. Set this Fault-Message to Caller-Response map in the outbound map of the Requeust-Response port.
In this case of messaging-only scenario, this method shall help in handling the fault message and passing fault details back to the caller. Refer the following articles for more details.
Synchronous web services calls and Faults
BizTalk and
SOAPFault
version issues
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful.

External Web Service call using WebMethods in Abap

Hi everyone,
I have presented with writing an interface, requested by a third party, in SAP ABAP that will call external web services from a java system. What I have been told is that I will be calling these services through webMethods. What I take is that webMethods is an SAP proxy wrapper around the web service. Beyond that I do not know what any of this is. I have asked my long-time ABAP developers and they have not seen any of the web calls through webMethods. Can someone present me with a basic understanding, maybe some code examples too? Also is this a standard function module call or a method in a class modules? How will it look to ABAP?
Thanks for any info you can provide,
Steve

Hello,
to be a bit more precise, WebMethods (or Business Connector) will register in sm59, and then you can make a function call in ABAP to this remote destination.
You will have to check what parameters the WebMethods Service needs and pass them from ABAP.
WebMethods then will take care of the WebService call to the external system and send the result back.
CSY

Issue with calling external web service with authentication details ...

Hi,
     I am facing a deployment issue with Oracle ESB. I am trying to call an external Web Service with authentication from ESB SOAP Service. It is working fine with my local ESB version 10.1.3.3.0 Build PCBPEL_10.1.3.3.0_GENERIC_070615.0525; however it is getting an error at our development ESB version 10.1.3.3.1 Build PCBPEL_10.1.3.3.1_GENERIC_RELEASE.
     I am getting following error.
An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: exception during SOAP invoke: Server was unable to process request. ---> Object reference not set to an instance of an object.; nested exception is: javax.xml.rpc.soap.SOAPFaultException: Server was unable to process request. ---> Object reference not set to an instance of an object. at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.populateFaultMessage(WSIFOperation_JaxRpc.java:3086) at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeOperation(WSIFOperation_JaxRpc.java:1728) at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeRequestResponseOperation(WSIFOperation_JaxRpc.java:1473) at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.executeRequestResponseOperation(WSIFOperation_JaxRpc.java:1196) at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(WSIFInvoker.java:867) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:770) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:790) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.nextService(OutboundAdapterService.java:208) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.processBusinessEvent(OutboundAdapterService.java:127) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(InitialEventDispatcher.java:118) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(InitialEventDispatcher.java:95) at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1424) at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(EventUtils.java:112) at oracle.tip.esb.server.service.EsbRouterSubscription.onBusinessEvent(EsbRouterSubscription.java:307) at oracle.tip.esb.server.dispatch.EventDispatcher.executeSubscription(EventDispat
     Could one of you please help me out to understand why it is happining.
Thanks in advance.
Jyotirmoy.

Hi Mahesh,
One you are missing is authentication token or credentials.
Please refer to the following articles.
http://www.cleverworkarounds.com/2014/02/05/tips-for-using-spd-workflows-to-talk-to-3rd-party-web-services/
A Series of articles related to Web Service in SPD Workflow
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 1
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 2
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 3
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 4
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 5
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 6
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 7
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 8
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 9
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 10
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 11
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 12
Please don't forget to mark it answered, if your problem resolved or helpful

Issue in creating web service for a ABAP Function Module

Hi,
now i'm learning how to create web service for a ABAP Function Module. I used the following steps.
1. select the Function Module, named "zws_test".
2. in the context menu, select "create->proxy object". so we enter into wizard.
3. in the wizard, press the radio button "Service Provider".
4. in the next page, press the radio button "Existing ABAP Objects(Inside Out)".
5. In the next page, Enter the "zws_test_prvider" as Service Definition and select "Function Module" as Endpoint Type.
6. in the next page, enter "zws_test" as Function Module and mark the "Mapping der Namen" button
7. in the next page,select "PRF_DT_IF_SEC_LOW" as Profile and mark "Deploy Service".
8. Save in the local package.
9. then it will pop up a window with title "WSDL Source". i selected "URL/HTTP Destination" and press "OK".
10.in the next page, i enter the URL as "http://hostname:portnumber/", and press "OK".
11. then it will pop up a window with title "Display logs". A record with error message "HTTP error(return code 404, message "Not found")" appears.
12. i press "ok" and a service provider with name "zws_test_prvider" appears in my local package.
13. i use "zws_test_prvider"'s URL to create a service consumer "ZCO_WS_TEST_CONSUMER" and logic portal "LP1".
14. But when i test my service consumer "ZCO_WS_TEST_CONSUMER", it will throw an exception "cx_ai_system_fault" with errortext "SOAP:14 Unexpected element -el=definitions ns=http://schemas.xmlsoap.org/wsdl/".
15. I use t-code SM59 to test connection and get the following info.
      Status HTTP Response     200
      Status Text                      OK
      Duration Test Call             328 ms.
who can give me the reasons about item 11 and 14, and explain me how to create service provider and service consumer for a Function Module.
Thanks in advance
Johnney

have you seen this weblog
/people/thomas.jung3/blog/2004/11/15/bsp-150-a-developer146s-journal-part-xiii-developing-abap-webservices

Is it possible to call an external web service using ABAP?

Hi~~
I wonder that is possible to use an external web service in SAPGUI using ABAP without PI ( Process Integraion ).
The external web service means the service that is developed by web-language like ASP.NET.
Thank you.

hi,
i'm trying to study on how to use the oracle bi publisher using another client application aside from oracle. the client application is custom and uses a .Net framework. unfortunately, i am not familiar with how .Net sends requests to oracle bi publisher so i was thinking that may be i can just create oracle pl/sql stored procedures that can send this requests over to bi publisher.
p.s. when you said concurrent manager, i'm not sure if you are referring to oracle apps concurrent manager but if you are, unfortunately i won't be using oracle apps with bi publisher.
thanks
allen

Issue when calling an external web service - CRM 2013

Hello everyone.
This is my scenario:
I'm doing a real time data integration from CRM to another software. I deployed several plugins, mostly in create/update messages, for the entities i want to sync. The developers of the other software gave me the endpoint of the web service and I created the
client using svcutil. I manually created the binding and gave it to the generated client, along with the endpoint. At the first tests I could sync some registries, but I had some mapping errors. I debugged the plugin, corrected the errors, and when I
want to tests again, the plugin is throwing me an exception when calls any method of the web service. Let me explain the issue:
The exception:
I instantiated the client for the web service (passing to it the binding and the endpoint). And when I'm trying to call any method (ex. Add), it throws the exceptions "InvalidOperationException". I started to debug the code and I notice that
just before to call the web service method, the state of the client stills in "Opening". Of course that is generating the exception.
The complete exception is: "The communication object, System.ServiceModel.ChannelFactory`1[IAxxisWcfServices], cannot be modified while it is in the Opening
state."} System.SystemException {System.InvalidOperationException}
I did a test, outside the CRM environment, on a console app with the same conditions of the web services client (generating with svcutil, manually passing the same binding and endpoint), and the same order of the plugin code, and everything works well; The
state of the client never stills in 'Opening', so I discarded any problem with the web service.
Anyone knows if I'm missing something in the code? or some configuration?
The CRM is 2013 On-premise with last updates.
Thanks in advance.

I tried adding the web reference in a console app and works fine. In the plugins this can't be done, because the plugins are deploy in database.
I tried another basic test using ChannelFactory. Only want to retrieve some entity through the external web services:
IPluginExecutionContext context = localContext.PluginExecutionContext;
IOrganizationService service = localContext.OrganizationService;
ITracingService tracer = localContext.TracingService;
try
BasicHttpBinding binding = new BasicHttpBinding();
binding.Name = "BasicHttpBinding_IAxxisWcfServices";
binding.Security.Mode = BasicHttpSecurityMode.None;
binding.Security.Transport.ProxyCredentialType = HttpProxyCredentialType.None;
binding.Security.Transport.ClientCredentialType = HttpClientCredentialType.None;
EndpointAddress endpoint = new EndpointAddress(@"http://*****.svc");
ChannelFactory<IAxxisWcfServices> factory = new ChannelFactory<IAxxisWcfServices>(binding, endpoint);
IAxxisWcfServices channel = factory.CreateChannel();
var entity = channel.FindByEntities(new CRM.Application.Context.Dtos.Asegurado( { CrmGuid = "7C3E96C6-C3BC-E411-80DF-0A736AE14667" }, null, new CRM.Framework.Session() { User = "***", Password = "***" });
catch (Exception ex)
throw new InvalidPluginExecutionException(ex.Message);
That test threw the following exception on the GenericParameterAttributes of channelType of factory object:
http://s27.postimg.org/4wf3er8up/Error.png

Calling external Web Service: PI is looking for a logical port and proxy.

Hi,
My scenario is ECC Proxy -> PI -> External Webservice (WS adapter).
the Web service adapter fails with the error message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">WS_ADAPTER_SYS_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>System error while calling Web service adapter: Error when initializing SOAP client application: 'error_text'</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
When I debug the message processing, it is looking for a port in table SSRVRTCONFIG, finds it(entry created automatically when WS adapter and the corresponding receiver agreement is activated in ID.
Then the program looks for an entry in "SRT_CFG_CLI_ASGN" for a proxy and logical port combination and errors out.
to be able to call an external web service, do we need a proxy to be created? I tried to create but the proxy creation fails because the external WSDL has some unsupported tags.
Also do we need to do any other configuration in SOAMANAGER? I am assuming not because the Web service is external.
Any help would be appreciated.
Thanks
Vijay

I already checked that note and made sure that the points mentioned are met. I have a trace set up on the target system and would know if the call reaches them and then fails in authorization. Right now the call doesnt even reach the target system and also from debugging I know that the program is looking for a proxy and then fails.

External Web Services as simple ABAP Proxy issue

Similar Messages

Maybe you are looking for