Extra content not showing up in fcp

hello, when i installed my final cut i installed the 50+ gigs of extra content (sounds, templates, etc) on my second internal hard drive while the final cut apps are on my main hard drive. in final cut, under the veiwer generator pop-up menu there is a options for text, color bars, etc. there is also an option for master templates with an arrow by it. when i scroll to it nothing appears. does the extra content need to be on the same hard drive as the apps or do i have to tell final cut where the extra content is?
thx

hello rgd22,
yes you are correct, there should be master templates in the FCP menu where you are looking ... the implementation of these is a bit, um, inconsistent, and while i can't find a place to set their location (to tell FCP where to find them), a search in the manual turns up some information on page 503 about where they should be ...
have a look see if that helps.
R.

Similar Messages

  • Shuffle contents not showing in itunes, license agreement wont go away

    When my shuffle is connected it does not show the contents in itunes. It shows that it is connected and the license agreement shows up in the window. After accepting the agreement it saves it to my computer but then still remains there. How do I get to the list of the songs on my shuffle?

    Set your screen resolution to at least 1024x768 and click Continue at the lower right of the iTunes window.

  • Backup contents not showing during Time Machine system restore

    I just installed a new hard drive on my Macbook Pro so I'm trying to restore a backup of my old hard drive that was saved on a USB-connected external drive (model: LaCie Minimus). However, when I try to transfer the information during system setup, my backup is not showing as part of the external drive's contents. Only the backup information of two other computers are showing up, but not mine (my computer is called 'Hannah Mercader's Macbook Pro'):
    However, if I plug the external drive into another laptop to view its contents, my computer's backup information is clearly in the external drive:
    I am positive that I have been backing up my laptop properly using Time Machine. However, the last time that I did try backing up my laptop, it didn't work because my hard drive had failed in the middle of the process (hence the reason for needing to install a new hard drive). I've already tried to Repair the external drive using Disk Utility... everything seems OK but my backups still aren't showing when I try to set up my laptop.
    Please help me to restore my last proper backup's contents!

    Most likely, some folders were excluded from your backups as the result of a failed or aborted software installation.
    Starting from a clean installation of OS X, set up a new administrator account and log in. Enter Time Machine and press the key combination shift-command-C. The front window will show all mounted volumes. All snapshots should now be accessible.* Select the one you want and navigate to your home folder (in the Users folder at the top level of the old startup volume.)
    You should now be able to restore your user data. I suggest you do this in two stages. Quit all applications except the Finder before you begin.
    Restore all the visible items at the top level of your home folder.
    Hold down the option key and select Go ▹ Library from the Finder menu bar. Enter Time Machine and restore all items in the Library folder. Log out and log back in as soon as the restore is complete.
    Any other invisible folders or files at the top level of your home folder that you want to preserve will have to be restored separately. For most users, that isn't necessary.
    You'll have to reinstall all third-party applications from scratch, or restore them from another kind of backup, if you have one.
    You'll have another problem if this is a new computer, or if you erased the startup volume: The next time you back up, Time Machine won't recognize any files as being the same as they were before, and will make a full copy of all files. There might not be enough space on one or more of your backup volumes for that. There are different ways of dealing with that situation, depending on your needs. The easiest way is to set your backup drives aside, if possible, until you're sure you'll no longer need the data on them, then erase them and start over. Meanwhile start a new backup on one or more empty storage devices. If that solution isn't workable for you, ask for instructions.
    *If you don't see any snapshots in Time Machine, exit the time-travel view and then hold down the option key while selecting
    Browse Other Backup Disks...
    from the Time Machine menu, which has an icon that looks like a clock running backwards. Select the backups of your computer by its previous name. If you don't have the Time Machine menu, open the Time Machine preference pane in System Preferences and check the box marked
    Show Time Machine in menu bar

  • Flash contente not showing on SOME sites

    I installed version 11.5.502.146 and since then I sometimes get web sites not SHOWING their flash content. I get sound, interactivity but no image.
    What is weird is that it works on other websites / contents.
    Example:
    Not Working:
    http://www.behr.com/Behr/home#
    http://www.adobe.com/products/flashplayer.html
    Working
    http://www.adobe.com/swf/software/flash/about/flashAbout_info_small.swf
    http://www.flashgames247.com/play/16065.html
    http://www.gameshot.org/?id=5150

    Could you try installing our 11.6 beta to see if that makes a difference?
    http://labsdownload.adobe.com/pub/labs/flashruntimes/flashplayer/flashplayer11-6_install_w in_ax.exe

  • After transfer mail to new computer new message content not showing in view mode

    I've been transferring data from OSX mavericks Macbook pro to imac using airdrop (migration assistant wasn't working).
    Wanted to duplicate mail from macbook so followed instructions for transferring as below
    http://www.macworld.com/article/1166999/transfer_email_from_one_mac_to_another.h tml
    Mail transfer worked great but my new messages aren't showing the content in the view area.
    I can get the new message blurb in the list but nothing in full viewing.
    The com.apple.mail.plist file actually was a plist.lockfile so not sure if that made a difference
    Plus, I did transfer the com.apple.mail-shared.plist as well. The older versions are on my desktop.
    The account names are different from one computer to the other but they show up as read-write on new computer files. I even added an administrator with read write priveleges on those files just incase. Nada.
    Any thoughts?

    Rebuild the mailboxes.

  • Website content not showing correctly (as in preview).

    I have just set my website live but noticed that it is not sclaing to fit the content corectly in the browser window (as it is showing correctly in my Muse preview). I am using business catalyst to host. It is as if the content is being stretched further past the browser limit then it needs to. I have struggled to get my content to fit to 100% width so I finally got some adobe chat help last night and the guy told me to load my background image directly into the browser and set it "to fill". In preview it looks and fits perfectly, but once it is published to BC the image is distorted and stretched out and some of the content it missing e.g. the copyright disclaimer I have at the bottom of each page.

    Are you sure you uploaded to the correct directory?
    Usually, you need a root directory set to something like docs, public, webs or the like.
    If your root folder is empty on your Remote Server Settings, you may have uploaded it to the directory level above your actual site root.
    On the opposite side of that coin, if you have a folder within your local site folder that has the same name as your root directory, you would have one too many directories. Your root folder locally can have any name and is not actually uploaded, you just transfer contents of your local root to your server root. So if you have a public (or any other name) folder within your local site folder and uploaded, your site would be at www.yoursite.com/rootfolder rather than www.yoursite.com
    EDIT: There are other possibilities too, could you post a link to your site so we can take a look?

  • KM document iview with HTML content not showing pictures

    Hello Experts,
    I am currently working on integrating a HTML page into the portal. As it is just a static page the decision was made to implement it via KM. Now when I create a "KM documents iView (w/o filter)" and point the path to the HTML file in the KM it is displaying the file, but not the images, which are stored in a folder structure below.
    But when previewing the HTML file directly it shows up just fine.
    Can anyone advise?
    Thanks a lot,
    Jan

    Hi,
    How you checked directly means?  Are you checking from desktop or from the KM content folder.
    if it is displaying properly in the KM content then automatically it should display properly in the KM document iview.
    In the html file, please use only the relative path of the images that are stored in the KM content.
    say  starting from /irj.........
    Hope it help you.
    Raghu

  • New content not showing up on ipod nano.

    When my ipod nano is plugged in, I can access and play the music I put on last time from the device, so it's obviously there. But when I unplug it the new content doesn't show up on the nano itself, and the songs which I deleted *are* showing up (although they don't have any content to play, it's just the names). Is there a way to fix this without wiping it and starting fresh? I'm travelling and don't have access to all my music.

    The maximum number of pages is 11. Maximum number of displayable apps is 16 x 11 = 176. Over that will not be displayed but can be found by searching.

  • "Show Package Contents" Not Showing

    http://tinypic.com/r/2ajcrgm/7
    There is no "show package contents" option when I right click. This screenshot was on a folder. Same with .dmg etc.
    Help?
    I do have "Secrets" downloaded (extra preferances thing). Maybe there is something there I hit or turn off?

    I think you are confusing what options apply to different file types.
    A .dmg is a disk image - you access it by double clicking it and it mounts on your desktop.
    Within the .dmg you'll see a .mpkg or a .pkg - the icons look like a 3D box. This can be right clicked (control clicked) and you will see the option to Show Package Contents. (Archive.bom, Archive.pax.gz, Info.plist, PkgInfo, Resources)
    Double clicking the .mpkg or .pkg invokes the Installer and installs the resources within the package on to your machine.
    Hope this clarifies things.
    Best Wishes.

  • Some folder contents not showing in Bridge CS3

    Some folders will not display in any way in Bridge. It does not seem to matter whether they are Jpeg or RAW files. Other folders on the same internal drive show fine. Tried several options with no luck.

    I should have researched a bit more. Did the holding Ctrl while opening Bridge and purged everything. Took care of it.
    Thanks though

  • Pages 5.5 table of contents not showing after formatting to ePub

    Im currently trying to format my pages version 5.5 document to ePub. My goal is to use the created document in iBooks. I have downloaded the ePub best practices template from the relevant apple help pages and followed the guidelines. However when opening the document as an ePub file via iBooks the table of contents is non existent. Any advice would be greatly appreciated. Thanks in advance.

    All the documentation I have read for created EPUB are to export XHTML, rather than DTBook. I'm not sure if it follows the same rules as EPUB for XHTML.
    Assuming it does, you need to do two things: (1) Create a TOC Style (not just a Table of Contents) in the Layout menu. (2) When in the Export EPUB dialog > Contents panel, specify the TOC Style you created.
    In an "normal" EPUB 2.01, that would do two things: It would create a navigational TOC shown in every EPUB reader, and it would leave the TOC you placed on your page as an internal TOC.

  • Table of contents not showing items before it

    I have a document which has to follow a strict format. It must have pages in the following order:
    Cover page
    Title page
    Acknowledgements
    Table of contents
    Various other stuff
    I've set up a table of contents and it's working fine, except it isn't showing items that appear before it. All I want is for the Acknowledgements page (which is immediately before the TOC) to show up in the TOC, but I can't get it to work.
    Is this just a limitation of Pages? Does the TOC only ever show items that appear after it?

    pd,
    Unfortunately for you, according to the Pages '09 User Guide, Chapter 3 Using Table Of Contents says the following:
    Creating and Updating a Table of Contents
    Each table of contents (TOC) you create using a Word Processing template lists only the content that follows it, up until the next table of contents. If you want a master table of contents for the entire document, it must be the only table of contents, and it must be at the beginning of the document.
    Sorry.

  • Color not showing properly in FCP v. 7.0.3

    I am trying to edit video shot with a Canon Mark D II and when it is opened in Quicktime (straight out of the camera) it is fine.  I am then taking the raw files and compressing through them through Magic Bullet Grinder - the files still look fine color wise.  But once they are imported into FCP version 7.0.3 the are showing as overly saturated.  I did test exporting the file back into a quicktime movie and the color is fine. It seems there is only a "viewing" issue while in Final Cut Pro.

    FCP 7 questions should be asked here:
    https://discussions.apple.com/community/professional_applications/final_cut_stud io
    This is the FCP X discussion group.
    Andy

  • DVD-Rom extra content not being included in build

    I'm really confused - I've set a location for a folder in which 4 .pdf files are included. But when I build the project the folder isn't being included in the root.
    Here's what I have: DVDROMContent/PDF/4 files
    I'm selecting the folder named "DVDROMContent" as the location, so according to the DVDSP manual it should be placing the folder "PDF" at the root, but for some reason it isn't.
    Any suggestions?

    I believe that if you're doing just a build it does not copy the files to the build location. If you burn it to a DVD or create an image to hard disc then the content will be written.
    o| TOnyTOny |o

  • Database content not showing in JSP page

    hi guys,
    I am having problems with showing the database content in a JSP page.
    I check my database and see that the content do exists.
    Can someone pls kindly advise.
    Below is my code:
    <TABLE BORDER=1 CELLPADDING=0 CELLSPACING=0>
    <TR>
    <TD>Last</TD>
    <TD>First</TD>
    <TD>Phone</TD>
    </TR>
    <% try {
    Class.forName("com.pointbase.jdbc.jdbcUniversalDriver");
    Connection conn = DriverManager.getConnection("jdbc:pointbase:server://localhost:9092/hour17);
    Statement st = conn.createStatement();
    ResultSet rs = st.executeQuery("SELECT * FROM CONTACTTABLE");
    while(rs.next()) {
         String last = rs.getString("LAST");
         String first = rs.getString("FIRST");
         String phone = rs.getString("PHONE"); %>
         <TR>
         <TD><%=last%></TD>
         <TD><%=first%></TD>
         <TD><%=phone%></TD>
         </TR>
    <% }
         rs.close();
         st.close();
         conn.close();
    } catch(Exception e) {
         System.out.println("Error: " + e.getMessage());
    %>

    pardon me but that is servlet tags or jsp tags?
    I haven't touch much on jsp tags(custom) yet cos I was stuck with the JDBC part of JSP.
    Thanks anyway.

Maybe you are looking for