Extract Dynamic Variant Contents

Hi
I have the requirement where I need to extract the vlaues of variants(Dynamic Variants).The contents of dynamic variants
can be extracted using the FM 'RS_VARIANT_CONTENTS' but only for programs where Logocal Databases(LDB) are used.
There are some of programs in SAP where LDB's and they have the dynamic selection screen.In this case the FM doesn't return
the contents of dynamic variant.
Could you please provide any FM or class which could return the contents of dynamic variants?
Thanks in advance
Davinder Singh

Please, post your solution.
Best regards,
Leandro Mengue

Similar Messages

Read Dynamic Selection contents of a Variant for QE51N

Hi Folks,
Need your help here !
In my report, I wish to read the Variants along with their contents created for transaction QE51N.
I tried using function module RS_VARIANT_CONTENTS and its working good, but not to my requirements. The function module returns only the selection screen contents of a given variant. It does not return the contents in 'Dynamic Selection' (Free Selection).
I read somewhere that the function module returns dynamic selection contents only if the report use Logical Database. To my understanding, the program for QE51N (SAPLQEES) do not use LDB.
So is there any way by which I can get dynamic selection contents of a variant?
Any suggestions / pointers would be a great help.
Thank you.
Regards,
Sud.

Hi,
Did you find somethings? I have the same issue.
I would like to add some new fields on Dynamic Selection screen of QE51N.
Thanks in advance.
KR,
Arnaud

How to create a multipage PDF with same template but dynamically varying data?

Hello,
I need to create a multi-page PDF where I need to use the same template but dynamically varying data.
Eg Scenario:
1. I have data for 5 material in my ABAP program.
2. I have a PDF template in SFP which has a 2 page structure.
3. Based on the number of materials (5 in this case), I need to generate a PDF which will have 10 pages (2 for each material).
4. the generated PDF should be like the one shown below:
e.g. MATERIAL_PDF (pdf name)
      | Page1(Mat1[View1].data)
      | Page2(Mat1[View2].data)
      | Page3(Mat2[View1].data)
      | Page4(Mat2[View2].data)
      | Page5(Mat3[View1].data)
      | Page6(Mat3[View2].data)
         .. and so on...
Thanks,
Aniket

Isn't it just by setting the two pages into a form ( like an subform in the content ) and put the settings in a proper way?
There is this setting, that the masterpage comes up everytime the pagecount is done.
Example
Page 1 3 5 --> Masterpage 1
Page 2 4 6 --> Masterpage 2
And the designview with the flowing data, you can do it by scripting to get to the next page after the pos is finished.
Unfortunaly I do not got a system atm, so I hope the explaination give you a clue, where to search.
Regards
Florian

Create Dynamic variant for date field

Hello all,
I need to have the current month year displayed in my selection screen in format MM.YYYY and the field is of type SPMON (Period to analyze - month).
and while saving the variant it is showing only 'T' (entries from TVARVC table) in "selection variable" field and not showing 'D' (Dynamic selection) for the above field.
So,please help me in resolving this issue.
Thanks in advance.

hi
good
go through this code,i hope this ll help you to create the dynamic variant.
Please find the sample using RS_CREATE_VARIANT (FM).
It make use of other FM also , just have a look .
Hope this may help you.
REPORT ZEXAMPLE.
DATA: JVARI_DESC LIKE VARID,
RC LIKE SY-SUBRC,
VARIANT_TEXT LIKE VARIT-VTEXT,
JVT LIKE VARIT OCCURS 0 WITH HEADER LINE,
SELPA LIKE RSPARAMS OCCURS 0 WITH HEADER LINE,
PARMS LIKE RSPARAMS OCCURS 0 WITH HEADER LINE,
OBJS LIKE VANZ OCCURS 0 WITH HEADER LINE.
PARAMETERS: P_VAR LIKE RSVAR-VARIANT. "NAME OF VARIANT
JVARI_DESC-REPORT = SY-REPID.
JVARI_DESC-VARIANT = P_VAR.
JVARI_DESC-ENAME = 'EXAMPLES'.
JVT-REPORT = SY-REPID.
JVT-VARIANT = P_VAR.
JVT-LANGU = SY-LANGU.
JVT-VTEXT = 'FUNCTION EXAMPLES'.
APPEND JVT.
CLEAR SELPA.
SELPA-SIGN = 'I'.
SELPA-OPTION = 'EQ'.
SELPA-KIND = 'P'.
SELPA-SELNAME = 'P_VAR'.
SELPA-LOW = P_VAR.
APPEND SELPA.
CHECK IF VARIANT EXISTS
CALL FUNCTION 'RS_VARIANT_EXISTS'
EXPORTING
REPORT = JVARI_DESC-REPORT
VARIANT = P_VAR
IMPORTING
R_C = RC
EXCEPTIONS
NOT_AUTHORIZED = 1
NO_REPORT = 2
REPORT_NOT_EXISTENT = 3
REPORT_NOT_SUPPLIED = 4
OTHERS = 5.
IF RC = 0 AND SY-SUBRC EQ 0.
DELETE OLD VARIANT
CALL FUNCTION 'RS_VARIANT_DELETE'
EXPORTING
REPORT = JVARI_DESC-REPORT
VARIANT = P_VAR
FLAG_CONFIRMSCREEN = 'X'
EXCEPTIONS
NOT_AUTHORIZED = 1
NOT_EXECUTED = 2
NO_REPORT = 3
REPORT_NOT_EXISTENT = 4
REPORT_NOT_SUPPLIED = 5
VARIANT_LOCKED = 6
VARIANT_NOT_EXISTENT = 7
NO_CORR_INSERT = 8
VARIANT_PROTECTED = 9
OTHERS = 10.
IF SY-SUBRC NE 0.
WRITE: 'UNABLE TO DELETE VARIANT:', P_VAR ,'STATUS=', SY-SUBRC.
EXIT.
ELSE.
WRITE:/ P_VAR, 'DELETED'.
ENDIF.
ELSE.
WRITE:/ P_VAR, 'DOES NOT EXIST'.
ENDIF. " ALREADY EXISTS
CALL FUNCTION 'RS_CREATE_VARIANT'
EXPORTING
CURR_REPORT = JVARI_DESC-REPORT
CURR_VARIANT = P_VAR
VARI_DESC = JVARI_DESC
TABLES
VARI_CONTENTS = SELPA
VARI_TEXT = JVT
EXCEPTIONS
ILLEGAL_REPORT_OR_VARIANT = 1
ILLEGAL_VARIANTNAME = 2
NOT_AUTHORIZED = 3
NOT_EXECUTED = 4
REPORT_NOT_EXISTENT = 5
REPORT_NOT_SUPPLIED = 6
VARIANT_EXISTS = 7
VARIANT_LOCKED = 8
OTHERS = 9.
IF SY-SUBRC EQ 0.
WRITE:/ 'VARIANT', P_VAR, 'CREATED FOR PROGRAM', JVARI_DESC-REPORT.
ELSE.
WRITE:/ 'VARIANT', P_VAR, 'NOT CREATED FOR PROGRAM', JVARI_DESC-REPORT.
EXIT.
ENDIF.
CALL FUNCTION 'RS_VARIANT_CONTENTS'
EXPORTING
REPORT = JVARI_DESC-REPORT
VARIANT = P_VAR
TABLES
VALUTAB = PARMS
OBJECTS = OBJS
EXCEPTIONS
VARIANT_NON_EXISTENT = 1
VARIANT_OBSOLETE = 2
OTHERS = 3.
IF SY-SUBRC NE 0.
WRITE : / 'ERROR READING VARIANT CONTENTS.'.
ELSE.
CALL FUNCTION 'RS_VARIANT_TEXT'
EXPORTING
LANGU = SY-LANGU
CURR_REPORT = JVARI_DESC-REPORT
VARIANT = P_VAR
IMPORTING
V_TEXT = VARIANT_TEXT.
WRITE:/ 'VARIANT DESCRIPTION:', VARIANT_TEXT.
LOOP AT PARMS.
CHECK PARMS-LOW NE SPACE OR PARMS-HIGH NE SPACE.
READ TABLE OBJS WITH KEY NAME = PARMS-SELNAME.
WRITE : /2 PARMS-SELNAME, OBJS-TEXT,
45 PARMS-KIND,
PARMS-SIGN,
PARMS-OPTION,
PARMS-LOW,
PARMS-HIGH.
NEW-LINE.
ENDLOOP.
SKIP.
ENDIF.
some other approach....
This function module selects the Selection Screen contents
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
EXPORTING
curr_report = sy-repid
TABLES
selection_table = loc_int_tab
EXCEPTIONS
not_found = 1
no_report = 2
OTHERS = 3.
IF sy-subrc NE 0.
MESSAGE i000 WITH 'Error in RS_REFRESH_FROM_SELECTOPTIONS'(029).
LEAVE LIST-PROCESSING.
ENDIF.
Craete the variant VAR1
CALL FUNCTION 'RS_CREATE_VARIANT'
EXPORTING
curr_report = sy-repid
curr_variant = wf_variant
vari_desc = loc_varid
TABLES
vari_contents = loc_int_tab
vari_text = loc_varit
EXCEPTIONS
illegal_report_or_variant = 1
illegal_variantname = 2
not_authorized = 3
not_executed = 4
report_not_existent = 5
report_not_supplied = 6
variant_exists = 7
variant_locked = 8
OTHERS = 9.
IF sy-subrc <> 0.
MESSAGE i000 WITH 'Error while creating dynamic variant'(028).
LEAVE LIST-PROCESSING.
ENDIF.
reward point if helpful.
thanks
mrutyun^

Set dynamic variant for time

Hi,
I have selection options for field as defined as TIME . I need to set dynamic variant for this field as
TIME should be "from"='current time-30 minutes' and "to"='24:59:59'.
This report going to run in 00 hours and 30 hours (48 times ie 24 X 2)
PS : Pl. remember this is for a SAP standard report
Any Info?
a®

Naimesh Patel wrote:
> I digged more deeper and found one FM RS_VARI_V_INIT_TIME which fill the options like Current Time, Current Time +/- ???, From Start of Day to Now etc. and Surprisinly all 3 options are hardcoded in it..!!
As you suggested due to hardcoded values here , we could not able to do much on this.
So i came in round away solution. Whenever program A called ( program with TIME selection input) i have called another custom program C . (This custom program will using the following function module RS_VARIANT_CONTENTS, and RS_VARIANT_CHANGE , So get the DEFAULT variant content of program A and change the variant content with LOW as current time - 30 and HIGH with 24:59:59) as preceding job.
In PI 7.01 system program A always called in JOB mode
Thanks for info.
a®

How to create Dynamic Variant?

Hi Experts,
One simple doubt pls.,
How to create a Dynamic Variant for my_z_selection_screen?
thanq.

hi,
Look at the following Code
Please find the sample using RS_CREATE_VARIANT (FM).
It make use of other FM also , just have a look .
Hope this may help you.
REPORT ZEXAMPLE.
DATA: JVARI_DESC LIKE VARID,
RC LIKE SY-SUBRC,
VARIANT_TEXT LIKE VARIT-VTEXT,
JVT LIKE VARIT OCCURS 0 WITH HEADER LINE,
SELPA LIKE RSPARAMS OCCURS 0 WITH HEADER LINE,
PARMS LIKE RSPARAMS OCCURS 0 WITH HEADER LINE,
OBJS LIKE VANZ OCCURS 0 WITH HEADER LINE.
PARAMETERS: P_VAR LIKE RSVAR-VARIANT. "NAME OF VARIANT
JVARI_DESC-REPORT = SY-REPID.
JVARI_DESC-VARIANT = P_VAR.
JVARI_DESC-ENAME = 'EXAMPLES'.
JVT-REPORT = SY-REPID.
JVT-VARIANT = P_VAR.
JVT-LANGU = SY-LANGU.
JVT-VTEXT = 'FUNCTION EXAMPLES'.
APPEND JVT.
CLEAR SELPA.
SELPA-SIGN = 'I'.
SELPA-OPTION = 'EQ'.
SELPA-KIND = 'P'.
SELPA-SELNAME = 'P_VAR'.
SELPA-LOW = P_VAR.
APPEND SELPA.
CHECK IF VARIANT EXISTS
CALL FUNCTION 'RS_VARIANT_EXISTS'
EXPORTING
REPORT = JVARI_DESC-REPORT
VARIANT = P_VAR
IMPORTING
R_C = RC
EXCEPTIONS
NOT_AUTHORIZED = 1
NO_REPORT = 2
REPORT_NOT_EXISTENT = 3
REPORT_NOT_SUPPLIED = 4
OTHERS = 5.
IF RC = 0 AND SY-SUBRC EQ 0.
DELETE OLD VARIANT
CALL FUNCTION 'RS_VARIANT_DELETE'
EXPORTING
REPORT = JVARI_DESC-REPORT
VARIANT = P_VAR
FLAG_CONFIRMSCREEN = 'X'
EXCEPTIONS
NOT_AUTHORIZED = 1
NOT_EXECUTED = 2
NO_REPORT = 3
REPORT_NOT_EXISTENT = 4
REPORT_NOT_SUPPLIED = 5
VARIANT_LOCKED = 6
VARIANT_NOT_EXISTENT = 7
NO_CORR_INSERT = 8
VARIANT_PROTECTED = 9
OTHERS = 10.
IF SY-SUBRC NE 0.
WRITE: 'UNABLE TO DELETE VARIANT:', P_VAR ,'STATUS=', SY-SUBRC.
EXIT.
ELSE.
WRITE:/ P_VAR, 'DELETED'.
ENDIF.
ELSE.
WRITE:/ P_VAR, 'DOES NOT EXIST'.
ENDIF. " ALREADY EXISTS
CALL FUNCTION 'RS_CREATE_VARIANT'
EXPORTING
CURR_REPORT = JVARI_DESC-REPORT
CURR_VARIANT = P_VAR
VARI_DESC = JVARI_DESC
TABLES
VARI_CONTENTS = SELPA
VARI_TEXT = JVT
EXCEPTIONS
ILLEGAL_REPORT_OR_VARIANT = 1
ILLEGAL_VARIANTNAME = 2
NOT_AUTHORIZED = 3
NOT_EXECUTED = 4
REPORT_NOT_EXISTENT = 5
REPORT_NOT_SUPPLIED = 6
VARIANT_EXISTS = 7
VARIANT_LOCKED = 8
OTHERS = 9.
IF SY-SUBRC EQ 0.
WRITE:/ 'VARIANT', P_VAR, 'CREATED FOR PROGRAM', JVARI_DESC-REPORT.
ELSE.
WRITE:/ 'VARIANT', P_VAR, 'NOT CREATED FOR PROGRAM', JVARI_DESC-REPORT.
EXIT.
ENDIF.
CALL FUNCTION 'RS_VARIANT_CONTENTS'
EXPORTING
REPORT = JVARI_DESC-REPORT
VARIANT = P_VAR
TABLES
VALUTAB = PARMS
OBJECTS = OBJS
EXCEPTIONS
VARIANT_NON_EXISTENT = 1
VARIANT_OBSOLETE = 2
OTHERS = 3.
IF SY-SUBRC NE 0.
WRITE : / 'ERROR READING VARIANT CONTENTS.'.
ELSE.
CALL FUNCTION 'RS_VARIANT_TEXT'
EXPORTING
LANGU = SY-LANGU
CURR_REPORT = JVARI_DESC-REPORT
VARIANT = P_VAR
IMPORTING
V_TEXT = VARIANT_TEXT.
WRITE:/ 'VARIANT DESCRIPTION:', VARIANT_TEXT.
LOOP AT PARMS.
CHECK PARMS-LOW NE SPACE OR PARMS-HIGH NE SPACE.
READ TABLE OBJS WITH KEY NAME = PARMS-SELNAME.
WRITE : /2 PARMS-SELNAME, OBJS-TEXT,
45 PARMS-KIND,
PARMS-SIGN,
PARMS-OPTION,
PARMS-LOW,
PARMS-HIGH.
NEW-LINE.
ENDLOOP.
SKIP.
ENDIF.
some other approach....
This function module selects the Selection Screen contents
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
EXPORTING
curr_report = sy-repid
TABLES
selection_table = loc_int_tab
EXCEPTIONS
not_found = 1
no_report = 2
OTHERS = 3.
IF sy-subrc NE 0.
MESSAGE i000 WITH 'Error in RS_REFRESH_FROM_SELECTOPTIONS'(029).
LEAVE LIST-PROCESSING.
ENDIF.
Craete the variant VAR1
CALL FUNCTION 'RS_CREATE_VARIANT'
EXPORTING
curr_report = sy-repid
curr_variant = wf_variant
vari_desc = loc_varid
TABLES
vari_contents = loc_int_tab
vari_text = loc_varit
EXCEPTIONS
illegal_report_or_variant = 1
illegal_variantname = 2
not_authorized = 3
not_executed = 4
report_not_existent = 5
report_not_supplied = 6
variant_exists = 7
variant_locked = 8
OTHERS = 9.
IF sy-subrc <> 0.
MESSAGE i000 WITH 'Error while creating dynamic variant'(028).
LEAVE LIST-PROCESSING.
ENDIF.

Creating a dynamic variant

Hi,
Iam using the following two function modules to craete a dynamic variant.
This function module selects the Selection Screen contents
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
    EXPORTING
      curr_report     = sy-repid
    TABLES
      selection_table = loc_int_tab
    EXCEPTIONS
      not_found       = 1
      no_report       = 2
      OTHERS          = 3.
IF sy-subrc NE 0.
    MESSAGE i000 WITH 'Error in RS_REFRESH_FROM_SELECTOPTIONS'(029).
    LEAVE LIST-PROCESSING.
ENDIF.
Craete the variant VAR1
CALL FUNCTION 'RS_CREATE_VARIANT'
    EXPORTING
      curr_report               = sy-repid
      curr_variant              = wf_variant
      vari_desc                 = loc_varid
    TABLES
      vari_contents             = loc_int_tab
      vari_text                 = loc_varit
    EXCEPTIONS
      illegal_report_or_variant = 1
      illegal_variantname       = 2
      not_authorized            = 3
      not_executed              = 4
      report_not_existent       = 5
      report_not_supplied       = 6
      variant_exists            = 7
      variant_locked            = 8
      OTHERS                    = 9.
IF sy-subrc <> 0.
    MESSAGE i000 WITH 'Error while creating dynamic variant'(028).
    LEAVE LIST-PROCESSING.
ENDIF.
Now my problem is I have one parameter 'filename' on selection screen which is of 255 characters lenth , but the internal table loc_int_tab in above function modules can hold up to 45 characters only. But I want to store all the 255 characters in it.
Have you ever comeacross with this problem"
Or do we have any other function modules which will sove the purpose.
Thanks in advance,
Brahma Reddy

split the file path lenghth into diffrent lines ,
say each line has 45 charcters
use fm split the lines into number of charcter
fm is SWA_SPLIT_STRING - here pass ur file path ,length 45 and internal table
internal table output will have diffrent lines,other program is going to concatenate all the lines into one line.

How to set up Dynamic Variants for job which is based on Pay Period

Hi,
We need to set up dynamic variant for payroll interface. This interface is based on Pay periods and that is why we need to use different variant for each month. Letus know how to set up dynamic variant which will take care of Pay Periods

Hi, Thnx for reply.
We are not changing the control records, current period will be some old period in system.
payroll is not processed in SAP,

Dynamically Updating Content Server Portlets

[urlHi, I am currently having difficulty dynamically updating content server portlets. I have a portlet of the following form:[/url]
ArticleName Author Title Date mystory author1 title1 04/05/01
story2 author2 title2 06/07/04
story author3 title3 01/02/03
So I have this table where each one of the line items is an article in the content server. So, for example the first line item is an article "mystory" by "author1", with title "title1" and date "04/05/01" additionally there is an article text field, but this isn't displayed unless I click on the article name.
I can set up the basics of this portlet, but when I try to add any real functionality I run into one of two problems.
First Problem: Passing Information
I cannot find a way to pass information between content portlets. For instance, if the user would like to "re-sort" this table based on "date", I would like to have the user click on the "date" column heading and then reload the page. To do so, I would have to pass the section name back to the page so that it could resort based on this data. I have not found anyway to effectively pass information to a content server portlet. I am building these pages through use of the presentation template framework (so I can have access to the content items) but that seems to change the way portlets are handled.
I got around this limitation with a regular portlet by creating an intermediary page which captures passed information and stores it to the session state. Once the information was in the session state, it is accessible to the portlet on the first page. However, this only works because remote portlets do not change their session id once loaded. Content Server portlets, on the other hand, change their session id after every reload of the browser or page change. I can send information from a content server portlet to an intermediary page, but I cannot send it back to the portlet because the session id has changed so I have no idea of knowing where to send the information. I can write it to a session state, but by the time I return to the portal page, the content server has changed its session id so it does not know where to look any longer.
I suppose it would be possible to create an application state variable and append it with some static token (if there is some static variable per portal session) but I would rather not have to deal with application variables if at all possible.
Second Problem: Dynamically Updating PCS Tags
Even if I were able to the pass information back to my content server portlet, I run into another issue. The easiest way to sort content server items is using the filter command in the pcs:foreach tag. So, if I wanted to sort by author name, I could do something like the following <pcs:foreach var="item" expr="filter(folderByName('content'), filtered.name == '"name")" or something like that (the syntax may be incorrect, I just wrote this off the top of my head). However, it appears that the way the presentation templates are compiled goes in the order of PCS tags THEN JSP. So I would have no way of dynamically changing the variable on which I sort. For example, if I clicked on "Date" above in my table, I would like to be able to dynamically change my code so that I sort on date, and not name. I cannot find a solution to this problem.
My workaround is to use the pcs tags to write out all the possible sortings to java array objects. This gives me access to the data on a JSP level and based on whatever the user will chose, I could then display that array. While this works, it is extremely ghetto and inefficient. Any help or suggestions would be fantastic.
Thanks a lot,
Jason Grauel

You can use just about any javascript you want in any Content Server presentation template including ones that are used for portlets.
However, you should be careful to name javascript functions and global variables uniquely so that they do not conflict with any other javascript on the page. To do this, you can append the item id to function and variable names, for example,
function doSomething<pcs:value expr="pcs_id"></pcs:value>() {
return true;
Randy

Using dynamic variants in ABAP

Hi,
I have an issue. I want to use dynamic variants in my program. On the selection screen of my program, I have a parameter called Planning date which takes in the current week of the year as input value, i.e lets say today we are Monday 14th of May 2007, so the current week is 20. I want to make this parameter dynamic, i.e to change automatically so that next week the value is week 21.
Also is setting dynamic variants version dependent? My version is 5.0 SR1 and I don't have the option of save my variant using the 'D' traffic signal.
Please help me out.
Thanks

Hi,
you can fill your parameter in the initialization event of your report. In order to get the week you can use the function DATE_GET_WEEK.
Kostas

How to extract original file contents from content server

Hi,
1)How can we extract original file contents from the content server (which in our case is SAP database itself)...
2)What exactly is PHIO_ID and LOIO_ID?
Thanks and regards,
Santhosh Kumar U.P

Hi,
concerning your first question - please decribe, what you are trying to do.
Question 2:
LOIO_ID is the ID of the Logical Information Object. A LOIO is not a real document, but kind of a virtual document, a containerfor all "real" versions of a document. A PHIO (physical info object) is a real document.
you can read more at http://sercie.sap.com/Kpro
Kind regards,
Carl

How to set a dynamic variant for date in select-options in the upper field

Hi Variant experts Good Evening!
I have the following problem while setting up a dynamic varinat .
Ex: select-options: dat for sy-datum.
I am able to save the lower limit as a dynamic value but not able to save the upper values as dynamic in the select-options. Could any of you please help me in this.
Regards
Ravi.

i hope dynamic variant concept is not there,
but u can use the fn module DYPRO_GET_VALUES and
DYNPRO_SET_VALUES
DYNPRO_GET_VALUES gets the values in the screen,
DYNPRO_SET VALUES sets the values.
first get the values, compare and set the values as u want

Dynamic variant create for select option High value

Hi ,
I would like to set a dynamic variant for Date filed in selection screen as lower limit as 01/01/2009 and Last day of previous month as hiher limit. For examplae: Lower limit = 01/01/2009 and higher limit as 02/28/2011.
Please help me in creating dynamic variant as mentiond above.
Thanks & Regards,
Venkat N.

Hi,
Thank you for your reply and could you please provide if you have any code.
Thanks & Regards,
Venkat N.

Dynamic Variant in ECC 6.0

Hi All,
Can any one tell me how to create a dynamic variant in ECC 6.0 for a exicutable program? In ECC 5.0 its easy to create but in ECC 6.0 the varinat creation screen has been changed.
Thanks
Manas

it's buried in there
this thread may help if you need to define custom variables
Re: CASH SALES
you'll see it under the variant attributes screen. i know people get reluctant to choose something from a grayed out field but you will be able to choose a selection variable and then the name of the variable
so for a date field you could choose say D and Previous Month

Create dynamic variante in report

hello masters, im trying to create a dynamic variant for a report, im following the instructions of document that exists in <blocked site removed by moderator> but the option D- Dynamic date calculation doesnt appear to me in the field that i want to calculate date... the field it is of type S - selection-option... someone have any clue that could be.
regards and thanks in advance
Mario
Edited by: Thomas Zloch on Jul 11, 2011 2:34 PM

hello Alvaro, thanks for your answer.
you are right, my field isnt DATE it is CHAR.
thanks for your help.
Mário

Extract Dynamic Variant Contents

Similar Messages

Maybe you are looking for