Extract the data from SQL Server and Import into Oracle
Hi,
I would like to run a daily job that will export the table data from SQL server table (it will be only one or two table) and Import back into Oracle table (it might one or two table tables).
Could you please guide me that how can i do this using either sql server or oracle?
We have oracle 9.2 and sql server 2005.
Normally i do from flat file which is generated by source destination nand i dump into oracle using sql*loader but this time I have to directly extract/export the data from MS Sql server and load into Oracle table, mostly it will reload so i might doing any massaging data during the load.
If you show me the detail approach, it will be really appreciated.
I have access to Sql server but i don't how to use sql server to do this or using oracle as a daily job even becuase have to schedule the job for this as it will be a daily job.
Thanks,
poratips
Unless you can find an open source ODBC driver for SQL Server that runs on Solaris (and I wouldn't be overly hopeful there) Heterogeneous Services would require that you license something-- a third party ODBC driver, a new Oracle instance, or an Oracle Transparent Gateway.
As I stated below, you could certainly use SQL Server's ETL tool, DTS. Oracle's ETL tools would require additional licensing since you're just on 9.2. You could also write a small application (Java or otherwise) that connected to both databases and transferred the data. If you're particularly enterprising, you could load the SQL Server Type 4 JDBC driver into Oracle's JVM and write a Java stored procedure that connected to the SQL Server database via JDBC, but that's a pretty convoluted approach.
Justin
Similar Messages
-
How to read the data from XML file and insert into oracle DB
Hi All,
I have below require ment.
I will receive data in the XML file. then i need to read that data and insert into oracle tables. please let me know how this can be handled.
Many Thanks.Sounds a lot like this question, only with less details.
how to read data from XML variable and insert into table variable
We can only help if you provide us details to help as we cannot see what you are doing and only know what you tell us. Plenty of examples abound on the forums that cover the topics you seek as well. -
How to extract incremental data from SQL server to oracle tables in ODI
HI All,
In my ODI sql server is install.My Source is in SQL server and my target is in Oracle.
I need to create a interface mapping where i need to extract incremental data from sql server to oracle.
There is a datetime(with Timestamp) field in sql server .I need to pull incremental data based on dateime.
Example = tablename.DateTime > (select '1-jan-11' from dual) .....i am using this query but its not woking.the error is Invalid object name"dual".
We are not going to use Incremental in IKM and LKM.
Request you to please provide any suggestion ASAP.
Thanks,
LonyYou can do that via Variable.
In the interface mapping create a filter on Tablename.DateTime
and put the condition like this
Tablename.DateTime BETWEEN #VAR and in the variable use this query in refreshing tab with oracle schema
SELECT max(start_time)||' AND '||max(END_TIME)+1 from audit_table where ETL_JOB_CODE = '20'In the package call the above variable in refresh mode and then interface.
This way you will pass from the query between and condition date and pass to interface so that SQL Server fetches the data between those too range.
Note:- You might need to tweak the date format so that SQL Server can understand.
Hope this helps. -
Copy the data from Sql Server to edirectory using java
Hi ,
I am new to e directory.I don't know how it works.Can some one assist
me on this ,I have to extract data from SQL Server and update these
data in edirectory.This is needs to be done using java.
If any one can provide me the sample code or please suggest how to
proceed .
Thanks in advance
dukewarm
dukewarm's Profile: http://forums.novell.com/member.php?userid=53430
View this thread: http://forums.novell.com/showthread.php?t=373051dukewarm;1792481 Wrote:
> Hi ,
>
> I am new to e directory.I don't know how it works.Can some one assist
> me on this ,I have to extract data from SQL Server and update these
> data in edirectory.This is needs to be done using java.
>
> If any one can provide me the sample code or please suggest how to
> proceed .
>
> Thanks in advance
Read the values from SQL server and use LDAP to update the data in
eDirectory.
Thomas
thsundel
thsundel's Profile: http://forums.novell.com/member.php?userid=128
View this thread: http://forums.novell.com/showthread.php?t=373051 -
How can I migrate data from SQL Server 6,5 to Oracle 8?
We have a web site based on Microsoft SQL Server 6.5.Now we plan
to migrate the database to Oracle 8.
We have redesigned the tables structure and created tables under
Oracle 8, so we only need to migrate data from SQL Server.
We've exported data from SQL Server to text files.
How can we import data from files and restore to Oracle tables.
Is there a solution which let us to import data for particular
table columns,not all columns?
We'll be appreciated if somene can give suggestions.
Regards
Michael
nullThank you for your reply.
I'll try the Oracle sqlloader utility first.
Regards
Micahel
Oracle Migration Workbench Team wrote:
: Michael,
: Oracle sqlloader is user for this sort of operation, see
: Oracle8i Utilities
: Release 8.1.5
: A67792-01
: available online through Oracle Technology Network.
: The Oracle Migration Workbench can be used to create bcp and
: sqlloader scripts, though since you have altered the schema
these
: scripts would need to be altered by hand after generation.
: Some thought has been put into redesigning table structures in
: the Oracle Migration Workbench, but currently it looks like
this
: reengineering will be left to be done by other tools, eg
Oracle
: Designer, once the SQLServer database has been duplicated with
as
: little change as possible onto Oracle.
: Hope that helps,
: Turloch
: Oracle Migration Workbench Team
: Michael (guest) wrote:
: : We have a web site based on Microsoft SQL Server 6.5.Now we
: plan
: : to migrate the database to Oracle 8.
: : We have redesigned the tables structure and created tables
: under
: : Oracle 8, so we only need to migrate data from SQL Server.
: : We've exported data from SQL Server to text files.
: : How can we import data from files and restore to Oracle
tables.
: : Is there a solution which let us to import data for
particular
: : table columns,not all columns?
: : We'll be appreciated if somene can give suggestions.
: : Regards
: : Michael
: Oracle Technology Network
: http://technet.oracle.com
null -
How to select data from Sql server 2005 database tableinto oracle database table
Hi,
I have table text1 in sql server database and text2 in oracle database (11g). Now how to move data from SQL Server table into oracle table. So please help me how to do it.
Thanks a lot in advance.
rk
OS: Windows 7 professionalHi,
you can use export/import wizard and specify sql server as a source and oracle as destination.
I hope this is helpful.
Please Mark it as Answered if it answered your question
OR mark it as Helpful if it help you to solve your problem
Elmozamil Elamir Hamid
MCSE Data Platform
MCITP: SQL Server 2008 Administration/Development
MCSA SQL Server 2012
MCTS: SQL Server Administration/Development
MyBlog -
Fetch the data from sql server table to array
In the following script i am fetching the servers details from text file. Please anyone help me to get the same information from sql server database table. with using this query
"SELECT DISTINCT [server_name]
FROM
Servers] where
Status='1'"
$ServerName =Get-Content "c:\servers\servers.txt"
foreach ($Server in $ServerName) {
if (test-Connection -ComputerName $Server -Count 4 -Delay 2 -Quiet ) {
write-output "$Server is alive and Pinging `n"
} else {
Write-output "TXUE $Server seems dead not pinging"i have tested it is not working..
=@"
SELECT DISTINCT [server_name] FROM Servers] where Status='1'
$connection
=new-objectsystem.data.sqlclient.sqlconnection(
"Data Source=xxx;Initial Catalog=xxx;Integrated Security=SSPI;”)
$adapter
=new-objectsystem.data.sqlclient.sqldataadapter($query,
$connection)
$table
=new-objectsystem.data.datatable
$adapter
.Fill($table)
| out-null
$compArray
=@($table)
##### Script Starts Here ######
foreach($Serverin$ServerName)
if(test-Connection-ComputerName$Server-Count4
-Delay2
-Quiet)
write-output"$Server
is alive and Pinging `n"
else{
$query -
How to get the data from a file and insert into a table
Good morning,
NEED TO READ THIS FILE sui_facturacion_alcantarillado_15085_2011_01_76845_00A.csv containing the following information
NUID,NUMERO_DE_CUENTA_CONTRATO,CÓDIGO_DANE_DEPARTAMENTO,CÓDIGO_DANE_MUNICIPIO,ZONA_IGAC,SECTOR_IGAC,MANZANA_O_VEREDA_IGAC,NÚMERO_DEL_PREDIO_IGAC,CONDICION_DE_PROPIEDAD_DEL_PREDIO_IGAC,DIRECCIÓN_DEL_PREDIO,NÚMERO_DE_FACTURA,FECHA_DE_EXPEDICIÓN_DE_LA_FACTURA,FECHA_DE_INICIO_DEL_PERÍODO_DE_FACTURACIÓN,DIAS_FACTURADOS,CÓDIGO_CLASE_DE_USO,UNIDADES_MULTIUSUARIO_RESIDENCIAL,UNIDADES_MULTIUSUARIO_NO_RESIDENCIAL,HOGAR_COMUNITARIO_O_SUSTITUTO,USUARIO_FACTURADO_CON_AFORO,USUARIO_CUENTA_CON_CARACTERIZACIÓN,CARGO_FIJO,CARGO_POR_VERTIMIENTO_BASICO,CARGO_POR_VERTIMIENTO_COMPLEMENTARIO,CARGO_POR_VERTIMIENTOSUNTUARIO,CMT,VERTIMIENTO_DEL_PERIOD_EN_METROS_CUBICOS,VALOR_FACTURADO_POR_VERTIDO,VALOR_DEL_SUBSIDIO,VALOR_DE_LA_CONTRIBUCIÓN,FACTOR_DE_SUBSIDIO_O_CONTRIBUCIÓN_CARGO_FIJO,FACTOR_DE_SUBSIDIO_O_CONTRIBUCIÓN_VERTIMIENTO,CARGOS_POR_CONEXIÓN,PAGO_ANTICIPADO_DEL_SERVICIO,DÍAS_DE_MORA,VALOR_DE_MORA,INTERESES_POR_MORA,OTROS_COBROS,CAUSAL_DE_REFACTURACIÓN,NUMERO_DE_LA_FACTURA_OBJETO_DE_REFACTURACIÓN,VALOR_TOTAL_FACTURADO,PAGOS_DEL_CLIENTE_DURANTE_EL_PERÍODO_FACTURADO
242602,242602,76,845,99,99,9999,9999,999,CLL 5 CRA 7 PEATONAL,24911920,12-01-2011,01-12-2010,30,01,,,0,0,0,1,0000000000.00,0000000000.00,0000000000.00,0000000000.00,0000000005,0000002200.00,0000000000,0000000000,0.000,0.000,0000000000.00,0000000000.00,0,0000000000.00,0000000000.00,0000000000.00,0,0,0000002201.00,0000000000.00
242604,242604,76,845,99,99,9999,9999,999,CRA 4 # 6 - 13,24911846,12-01-2011,01-12-2010,30,01,,,0,0,0,1,0000000000.00,0000000000.00,0000000000.00,0000000000.00,0000000013,0000002200.00,0000000000,0000000000,0.000,0.000,0000000000.00,0000000000.00,0,0000000000.00,0000000000.00,0000000000.00,0,0,0000002201.00,0000004411.00
242605,242605,76,845,99,99,9999,9999,999,CRA 2 CLLES 3 Y 4,24911509,12-01-2011,01-12-2010,30,01,,,0,0,0,1,0000000000.00,0000000000.00,0000000000.00,0000000000.00,0000000004,0000002200.00,0000000000,0000000000,0.000,0.000,0000000000.00,0000000000.00,0,0000000000.00,0000000000.00,0000000000.00,0,0,0000002201.00,0000002200.00
this is the function that I have
<<function_test>>
DECLARE
TOTAL_CAR NUMBER;
POS_1 NUMBER:= 0;
POS_2 NUMBER:= 0;
REST NUMBER:= 0;
ACUM NUMBER:= 0;
CADEN VARCHAR2(200);
nom_archivo varchar2(80);
v1 utl_file.file_type;
v2 varchar2(2048);
BEGIN
nom_archivo := 'sui_facturacion_alcantarillado_15085_2011_01_76845_00A.csv';
v1:= utl_file.fopen('PUBLIC_ACCESS',nom_archivo,'R',32767);
utl_file.get_line(v1,v2);
SELECT LENGTH(v2) INTO TOTAL_CAR FROM DUAL;
ACUM:=1;
POS_1:=0;
WHILE ACUM <= 60
LOOP
select instr(v2, ',', 1, ACUM) PRUEBA
INTO POS_2
FROM DUAL;
dbms_output.put_line(' TOTAL POSICION 1--> '|| POS_1);
dbms_output.put_line(' TOTAL POSICION 2--> '|| POS_2);
dbms_output.put_line(' TOTAL ACUMULADO --> '|| ACUM);
REST := (POS_2-POS_1)-1;
SELECT SUBSTR(v2,(POS_1+1),REST) PRUEBA2
INTO CADEN
FROM DUAL;
dbms_output.put_line(' CADENA SELECCIONADA --> '|| CADEN);
ACUM := ACUM + 1;
POS_1:= POS_2;
END LOOP;
utl_file.fclose(v1);
dbms_output.put_line(' -->');
dbms_output.put_line(' TOTAL POSICION 1-->'|| POS_1);
dbms_output.put_line(' TOTAL POSICION 2-->'|| POS_2);
dbms_output.put_line(' TOTAL ACUMULADO -->'|| ACUM);
dbms_output.put_line(' TOTAL DE CARACTERES -->'|| TOTAL_CAR);
dbms_output.put_line(' ');
EXCEPTION
WHEN NO_DATA_FOUND THEN
dbms_output.put_line('NO SE ENCONTRARON MAS CARACTERES');
WHEN OTHERS THEN
dbms_output.put_line('OTRO TIPO DE ERROR ');
dbms_output.put_line('CODIGO ERROR '|| SQLCODE ||' '||SQLERRM);
END;
Which must be separated by a comma and enter a table I have the following procedure in which only brings me the first line, which need not
The current role I have just read and extract data from the row number 1, I do not need information.
I need information for rows 2,3,4. In each row there are 41 fields, which I enter in a table called Dato_archivos.
how to perform this function? ...
I appreciate the cooperation and explanation ...
GOOD DAY ...
REYNEL SALAZAR MARTINEZ
COLOMBIA ...When you get an error with external tables (or sql*loader) look in the same folder as the data file and you should get a .log file and maybe a .bad file too.
The log file should indicate the nature of the error it has trying to load the data.
I've just copied your sample data from your first post to a file on my server and tried it to find that you are not specifying the required format for your dates. The below shows it now working...
CREATE TABLE tabla_prueba
(NUID NUMBER,
NUM_CUENTA_CONTRATO NUMBER,
COD_DANE_DD NUMBER,
COD_DANE_MM NUMBER,
ZONA_IGAC NUMBER,
SECTOR_IGAC NUMBER,
MANZANA_VEREDA_IGAC NUMBER,
NUM_PREDIO_IGAC NUMBER,
CONDICION_PREDIO_IGAC NUMBER,
DIRECCION_PREDIO_IGAC VARCHAR2(80),
NUM_FACTURA NUMBER,
FECHA_EXPED_FACTURA DATE,
FECHA_INI_PERIODO_FACTURACION DATE,
DIAS_FACTURADOS NUMBER,
COD_CLASE_USO NUMBER,
UNI_MULTIUSUARIO_RESIDENCIAL NUMBER,
UNI_MULTIUSUARIO_NORESIDENCIAL NUMBER,
HOGAR_COMUNITARIO NUMBER,
USUARIO_FACTURADO_AFORO NUMBER,
USUARIO_CON_CARACTERIZACION NUMBER,
CARGO_FIJO NUMBER,
CARGO_VERTIMENTO_BAS NUMBER,
CARGO_VERTIMENTO_COMP NUMBER,
CARGO_VERTIMENTO_SUNT NUMBER,
CMT NUMBER,
VLR_FACTURADO_VERTIDO NUMBER,
VLR_SUBSIDIO NUMBER,
VLR_CONTRIBUCCION NUMBER,
FACTOR_SUBS_CONTR_CARGO_FIJO NUMBER,
FACTOR_SUBS_CONTR_VERTIMENTO NUMBER,
CARGO_CONEXION NUMBER,
PAGO_ANTICIPADO_SERVICIO NUMBER,
DIAS_MORA NUMBER,
VLR_MORA NUMBER,
INTERES_MORA NUMBER,
OTROS_COBROS NUMBER,
CAUSAL_REFACTURACION NUMBER,
NUM_FACTURA_OBJ_REFACTURACION NUMBER,
VLR_TOTAL_FACTURADO NUMBER,
PAGOS_CLIENTE_DURANTE_PERIODO NUMBER
ORGANIZATION EXTERNAL
(TYPE ORACLE_LOADER
DEFAULT DIRECTORY TEST_DIR
ACCESS PARAMETERS
(RECORDS DELIMITED BY NEWLINE
SKIP 1
FIELDS TERMINATED BY ","
OPTIONALLY ENCLOSED BY '"'
(NUID,
NUM_CUENTA_CONTRATO,
COD_DANE_DD,
COD_DANE_MM,
ZONA_IGAC,
SECTOR_IGAC,
MANZANA_VEREDA_IGAC,
NUM_PREDIO_IGAC,
CONDICION_PREDIO_IGAC,
DIRECCION_PREDIO_IGAC,
NUM_FACTURA,
FECHA_EXPED_FACTURA CHAR DATE_FORMAT DATE MASK "DD-MM-YYYY",
FECHA_INI_PERIODO_FACTURACION CHAR DATE_FORMAT DATE MASK "DD-MM-YYYY",
DIAS_FACTURADOS,
COD_CLASE_USO,
UNI_MULTIUSUARIO_RESIDENCIAL ,
UNI_MULTIUSUARIO_NORESIDENCIAL,
HOGAR_COMUNITARIO ,
USUARIO_FACTURADO_AFORO ,
USUARIO_CON_CARACTERIZACION ,
CARGO_FIJO ,
CARGO_VERTIMENTO_BAS ,
CARGO_VERTIMENTO_COMP,
CARGO_VERTIMENTO_SUNT,
CMT,
VLR_FACTURADO_VERTIDO,
VLR_SUBSIDIO ,
VLR_CONTRIBUCCION ,
FACTOR_SUBS_CONTR_CARGO_FIJO ,
FACTOR_SUBS_CONTR_VERTIMENTO ,
CARGO_CONEXION ,
PAGO_ANTICIPADO_SERVICIO ,
DIAS_MORA ,
VLR_MORA ,
INTERES_MORA ,
OTROS_COBROS ,
CAUSAL_REFACTURACION ,
NUM_FACTURA_OBJ_REFACTURACION,
VLR_TOTAL_FACTURADO,
PAGOS_CLIENTE_DURANTE_PERIODO
LOCATION ('test.csv')
SQL> select * from tabla_prueba;
NUID NUM_CUENTA_CONTRATO COD_DANE_DD COD_DANE_MM ZONA_IGAC SECTOR_IGAC MANZANA_VEREDA_IGAC NUM_PREDIO_IGAC CONDICION_PREDIO_IGAC DIRECCION_PREDIO_IGAC NUM_FACTURA FECHA_EXPE FECHA_INI_
DIAS_FACTURADOS COD_CLASE_USO UNI_MULTIUSUARIO_RESIDENCIAL UNI_MULTIUSUARIO_NORESIDENCIAL HOGAR_COMUNITARIO USUARIO_FACTURADO_AFORO USUARIO_CON_CARACTERIZACION CARGO_FIJO CARGO_VERTIMENTO_BAS CARGO_VERTIMENTO_COMP CARGO_VERTIMENTO_SUNT CMT
VLR_FACTURADO_VERTIDO VLR_SUBSIDIO VLR_CONTRIBUCCION FACTOR_SUBS_CONTR_CARGO_FIJO FACTOR_SUBS_CONTR_VERTIMENTO CARGO_CONEXION PAGO_ANTICIPADO_SERVICIO DIAS_MORA VLR_MORA INTERES_MORA OTROS_COBROS CAUSAL_REFACTURACION NUM_FACTURA_OBJ_REFACTURACION
VLR_TOTAL_FACTURADO PAGOS_CLIENTE_DURANTE_PERIODO
242602 242602 76 845 99 99 9999 9999 999 CLL 5 CRA 7 PEATONAL 24911920 12-01-2011 01-12-2010
30 1 0 0 0 1 0 0 0 0
5 2200 0 0 0 0 0 0 0 0 0 0 0
0 2201
242604 242604 76 845 99 99 9999 9999 999 CRA 4 # 6 - 13 24911846 12-01-2011 01-12-2010
30 1 0 0 0 1 0 0 0 0
13 2200 0 0 0 0 0 0 0 0 0 0 0
0 2201
242605 242605 76 845 99 99 9999 9999 999 CRA 2 CLLES 3 Y 4 24911509 12-01-2011 01-12-2010
30 1 0 0 0 1 0 0 0 0
4 2200 0 0 0 0 0 0 0 0 0 0 0
0 2201
SQL>
{code} -
Retrieve data from SQL database and put into a table
Hi all, i encountered this error while trying to create a table in 1 of my panels:
C:\Documents and Settings\L311c01\Desktop\FYPJ Java2\RFIDLogistics.java:25:{color:#ff0000} cannot find symbol
symbol : class ResultSetTable
{color}location: class jdbc_bible.part2.RFIDLogistics
private static ResultSetTable model = new ResultSetTable();
^
C:\Documents and Settings\L311c01\Desktop\FYPJ Java2\RFIDLogistics.java:25: {color:#ff0000}cannot find symbol
symbol : class ResultSetTable
{color}location: class jdbc_bible.part2.RFIDLogistics
private static ResultSetTable model = new ResultSetTable();
I understand that " cannot find symbol class ResultSetTable means that i need to import something which has this ResultSetTable. I suppose my imports are sufficient and i think the error is with the package that i included.
This package was taken from an example in a book named java database programming bible, so i assumed it is reliable and i use it for my insert statement, which had a DataInserter.
Could someone plz help me with this? Thanks alot in advance.
Here are the codes:
{color:#ff0000}package jdbc_bible.part2;{color}
import java.sql.*;
import javax.swing.*;
import java.util.Vector;
import javax.swing.table.AbstractTableModel;
import java.awt.*;
import java.awt.event.ActionListener;
import java.awt.event.ActionEvent;
import java.io.*;
import java.util.*;
import javax.swing.event.*;
import java.awt.event.*;
import javax.swing.border.*;
import sun.jdbc.odbc.JdbcOdbcDriver;
public class RFIDLogistics extends JFrame{
//Components
// public SimpleClock clock;
private static JTable jt;
private static ResultSetTable model = new ResultSetTable();
some codes
{color:#ff0000}try
{{color}
{color:#ff0000} DataInserter inserter = new DataInserter();
String SQLCommand = "INSERT INTO " + flstr + " (Item_ID,Location_ID) VALUES ('"+Item_ID1+"','"+Location_ID1+"')";
String SQLCommand2 = "UPDATE Location SET Item_ID = '"+Item_ID1+"' WHERE Location_ID = '"+Location_ID1+"'";
inserter.execute(SQLCommand);
inserter.execute(SQLCommand2);
{color} JOptionPane.showMessageDialog(null, "Successful!");
catch(ClassNotFoundException f)
f.printStackTrace();
catch(SQLException f)
f.printStackTrace();
some codes
public JPanel rightPanel() {
JPanel rightPanel = new JPanel();
rightPanel.setLayout(new BoxLayout(rightPanel, BoxLayout.Y_AXIS));
//Forklift title Panel
JPanel panel6 = new JPanel();
panel6.setBorder(new TitledBorder(""));
panel6.setPreferredSize(new Dimension(192,33));
panel6.add(forkliftDetails);
//Forklift 1 Panel
{color:#ff0000} JPanel panel7 = new JPanel();
panel7.setBorder(new TitledBorder("Forklift 1"));
panel7.setPreferredSize(new Dimension(192,120));{color}
{color:#ff0000} String query = "SELECT * FROM Forklift1";
try{
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con = DriverManager.getConnection("jdbc:odbc:RFID Logistics");
PreparedStatement pstmt = con.prepareStatement(query);
ResultSet rs= pstmt.executeQuery();
// display the data in jtable
jt = new JTable();
model.setResultSet(rs);
jt.setModel(model);
catch(ClassNotFoundException sqle){
System.out.println(sqle);
}catch(SQLException sqle){
System.out.println(sqle);
panel7.add(itemDetail1);
itemDetail1TextField.setEditable(false);
panel7.add(itemDetail1TextField);
panel7.add(locationDetail1);
locationDetail1TextField.setEditable(false);
panel7.add(locationDetail1TextField);
panel7.add(jt);
{color}..
//Main Method
public static void main(String args[]) {
RFIDLogistics app = new RFIDLogistics();
app.setFrame();
app.setResizable(false);
app.setDefaultCloseOperation(EXIT_ON_CLOSE);
app.setSize(1024,676);
app.setLocation(0,60);
app.setVisible(true);
If you would like to try if my table can extract, here are the sample codes, just change ur database name which is highlighted in green, and the table name in blue.
Codes:
import java.sql.*;
import javax.swing.*;
import java.util.Vector;
import javax.swing.table.AbstractTableModel;
import java.awt.*;
import java.awt.event.ActionListener;
import java.awt.event.ActionEvent;
import java.io.*;
import java.util.*;
import javax.swing.event.*;
import java.awt.event.*;
import javax.swing.border.*;
import sun.jdbc.odbc.JdbcOdbcDriver;
public class sample1{
private static JFrame frm;
private static JTable jt;
private static ResultSetTable model = new ResultSetTable();
public static void main(String args[]){
String query = "SELECT * FROM {color:#00ccff}Forklift1{color}";
try
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con = DriverManager.getConnection("jdbc:odbc:{color:#00ff00}RFID Logistics{color}");
PreparedStatement pstmt = con.prepareStatement(query);
ResultSet rs= pstmt.executeQuery();
// display the data in jtable
jt = new JTable();
model.setResultSet(rs);
jt.setModel(model);
frm = new JFrame("Sample");
frm.setSize(400,400);
frm.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frm.add(jt);
frm.setVisible(true);
}catch(ClassNotFoundException sqle){
System.out.println(sqle);
}catch(SQLException sqle){
System.out.println(sqle);
Could someone plz help me with this? Thanks alot in advance.public JTable populateTable()
String[] colNames = new String[] {"ID","NAME","SURNAME"};
return new JTable(getSQLData(), colNames);
public Object[][] getSQLData()
stmt = conn.createStatement();
ResultSet rs = stmt.executeQuery("SELECT [ID], [NAME], [SURNAME] FROM [USERS]");
Object[][[] out = new Object[rs.getFetchSize()][3];//Not sure on getFetchSize but it should work
int i = 0;
while(rs.next())
out[0] = rs.getInt(1);
out[i][1] = rs.getString(2);
out[i++][2] = rs.getString(3);
return out;
The above code will create a JTable with the data retrieved from the DB -
Transfer data from SQL Server 7.0 to Oracle 7.3.3
Hi there,
We need to transfer some of the data (not whole database) from
a SQL Server 7.0 database to an Oracle 7.3.3 database. Are there
any tools that we can use? Which tool do you recommend?
Thanks in advance.
Catherine
nullhi Catherine,
Download the Oracle Migration Workbench for SQL Server 7.0 from
this site. It is located under the Software section of the Oracle
Migration Workbench page.
Regards
John
Catherine (guest) wrote:
: Hi there,
: We need to transfer some of the data (not whole database) from
: a SQL Server 7.0 database to an Oracle 7.3.3 database. Are
there
: any tools that we can use? Which tool do you recommend?
: Thanks in advance.
: Catherine
Oracle Technology Network
http://technet.oracle.com
null -
Retrieve Image from SQL Server and Store in Oracle
Hi All
I want to retrieve the image stored in sql server as a image type and store that image to oracle as a BLOB type.
I tried to retrive the image from sqlserver using getBytes and when storing to Oracle i have to type cast the byte array to BLOB then only it will be inserted please tell how to typecast byte array to BLOB.
Or is there alternative way how to retrieve the image stored in sql server as a image type and store that image to oracle as a BLOB type.
Regards
MajidHi Rajaram
Thanks for UR Reply
I tried what you have suggested but i am getting following exception
java.lang.NullPointerException
CDVLogger--getInstance--entered in ----getInstance----- null
CDVLogger--getInstance--entered in ----logPrinter----- null
CDVLogger--getInstance--entered in ----logger----- com.uttra.cdv.base.util.CDVLogger@b0ce8f
at javax.sql.rowset.serial.SerialBlob.<init>(SerialBlob.java:82)
at com.uttra.cdv.bulkimport.oracletca.image.FamilyMemberPhoto.createFamilyMemberPhotoRec(FamilyMemberPhoto.java:95)
at com.uttra.cdv.bulkimport.oracletca.image.FamilyMemberPhoto.LoadFamilyMemberPhoto(FamilyMemberPhoto.java:55)
at com.uttra.cdv.bulkimport.oracletca.image.FamilyMemberPhoto.main(FamilyMemberPhoto.java:136)
Please Suggest -
How to get the data from one table and insert into another table
Hi,
We have requirement to build OA page with the data needs to be populated from one table and on save data into another table.
For the above requirement what the best way to implement in OAF.
I understand that if we attach VO object instance to region/page, we only can pull and put data in to only one table.
ThanksYou can achieve this in many different ways, one is
1. Create another VO based on the EO which is based on the dest table.
2. At save, copy the contents of the source VO into the dest VO (see copy routine in dev guide).
3. commiting the transaction will push the data into the dest table on which the dest VO is based.
I understand that if we attach VO object instance to region/page, we only can pull and put data in to only one table.
if by table you mean a DB table, then no, you can have a VO based on multiple EOs which will do DMLs accordingly.Thanks
Tapash -
How to read the data from excel file and store into the table?
Hi All,
I have table with BLOB datatype contains a excel file. I have to read that data from excel and store into one table with all the fields in excel.
All the excel fields and my table columns are same.
Can you share with me how can acheive this using LOB's?
ThanksHi OraSuirya,
you can try with external tables .
syntax as follows
create table ext_table_csv (
i Number,
n Varchar2(20),
m Varchar2(20)
organization external (
type oracle_loader
default directory ext_dir
access parameters (
records delimited by newline
fields terminated by ','
missing field values are null
location ('file.csv')
reject limit unlimited;
For this you need to create directory
Directory Creation syntax:
create or replace directory ext_dir as 'D:\oracle\user_dir\ext_dir';
grant read, write on directory ext_dir to <User>;
please paste the excel file in the particular directory .
I hope this will help you.
Please correct me if I am wrong anywhere .
Thanks,
Tippu. -
Importing data from SQL Server 2005 database
Dear Friends
Scenario:
We have built an application for which the database is SQL Server 2005.
Now, we have planned to switch over to Oracle 8i database.
There is a field with data type as Varchar(Max) – which can hold data with a maximum length of 231 characters (SQL Server 2005)
In Oracle 8i, the Varchar2 max size 4000 bytes or characters.
We want to import the data from SQL Sever 2005 database into Oracle 8i database.In the process, the value for the particular field whose data type set as Varchar(Max) in SQL Server 2005 and contains more than 4000 characters gets automatically truncated while importing into oracle.
We want the entire characters stored in the field to be imported into oracle database.
Please suggest solutions.
Thanks and regards
Bharath Kumar VUse CLOB if the data is purely text data. BLOB otherwise.
But the question is why you want to switch over to an Oracle version which is de-supported by Oracle? -
Import data from SQL Server to Oracle
I have created a dblink in oracle to access the SQL database. I am able to run queries through the dblink and it works fine. I have created a test table on Oracle Server to import the data. The field named "description" has CLOB data type. The corresponding datatype on SQL Server is varchar(7000).
When I insert the data from SQL Server, it completes successfully without any error but it truncates the data on CLOB field.
If I run the select query in SQLPlus I can see the entire description.
Select "description" from sql_view@dblink;
-- the above works fine.
CREATE table test
(description CLOB);
INSERT INTO TEST
Select "description" from sql_view@dblink;
-- this works but it truncates the data after 256 characters
My question is, how to get the data from SQL Server without truncating characters.
Thanks in advance,
GopalI hear the same from other friend that sql server truncated the leading zeros from the id column.
I really don't have a solution for this but you can try the work around. Export the data to flat file and upload in oracle using SQL loader, as this would be much faster and efficient.
Maybe you are looking for
-
Writing Dynamic code in smart form
Hi All, I have a issue on Smart form . the smart form is customized view of bbp_po(srm) for po(purchase order) details in that in a secoundary window where vedor adress is displaying .In the first line of the address name1 and name2 are displayin
-
Problem accesing instances from global activities
Hi I´m really new at this and I´m not secure if I´m doing this all right. I want to access to a particular instance, using instance id, from a global activity. I´m using the next code: {color:#333333}*ordersProcess = ClientBusinessProcess()*{color} {
-
LSMW - Withholding taxes - RFBIBL00 program
Hi, I need to change a LSMW for FI Postings with Withholding Taxes. The LSMW reads 2 files (Header and Item) and I need to add the 3rd file (withholding taxes). Header and Item are related by the first field of both structures. How do I create the so
-
Image width/height without loading file into JVM?
How do we find the width/height of an image, without loading the image into the JVM? Also it would be nice to to obtain the height/width without creating any new objects(from which i would obtain the height and width). Thanks Tapan Edited by: tapanmo
-
How do i clear the receiver and send buffer?
I am trying to communicate with the Votsch 3050 thermal chamber, with LabVIEW as the control software via serial RS232. In sending the required ASCII strings, there was no response from the chamber, yet no error. The manufacturers indicate clearing t