Extraction of data from shared tables
Hello All,
I have a scenario where I have two different software systems (SAP and xyz systems), where a intermediate table will be created in between the two systems that is shared. Data will be updated by the xyz systems into this shared table. Now, my questions regarding this shared table.
1) Can we write some program or something to get the data from shared table to update the SAP?
2) If possible send me the suggestions
3) Please also send me the sample code to get the data from the shared table
Thanks in advance,
SDN powered
Hi,
1. Push mechanism
Write a RFC on SAP side to insert entries into the table.
Call the RFC from xyz application passing the data you want to insert.
2. Pull mechanism
Write a ABAP Program, where you can somehow read the data of the xyz application and insert data into the table.
3. Flat file
Dump the data from xyz application into the file.
Write a ABAP program to read the file and update the table.
Regards,
Ravi
Note - Please mark all the helpful answers
Similar Messages
-
Error occured while extracting the data from BSIK Table
Hi Experts,
I am trying to extract the data from "BSIK" by using generic extraction by table, I am getting the error "Invalid extractiion Structure template BSIK of Data source XXXXXX", But when i am trying the same by using VIEW, i am able to do it,
I am getting same problem while extracting the data from other tables like "BSIK, BSAK.........."
can some one explain me why it is throughing some error when i am doing generic extraction by using Table,
Thanks,Hi,
Can you check below link:
Invalid extract structure template ZBW_VW_EKES of DataSource ZBW_SCN_VENDOR
Hope this answer your question!
Regards,
Nilima -
Extraction of data from different tables
hi,
i have requirment as following .
I have tables EKET,EKKO,EKPO,EKKI,EKPA for all the tables there is common primary key (EBELN,EBELP),but i want to bring the all the data from all tables by using join,how to bring all the data can any body give me the idea.
Thanks,
Rammohan.hi,
search for exisintg views with: se11-search
and fill primary and base table
or create your own view
A.
Message was edited by: Andreas Mann -
Performance tuning for extraction of data from MSEG table
Hello experts,
I m trying to extract data via select query from MSEG table based on non-primary keys, which affects my performance.
Below is my select query :
SELECT SINGLE menge
FROM mseg
INTO w_rejqty
WHERE ebeln = it_mseg-ebeln AND
ebelp = it_mseg-ebelp AND
bwart = '122'.
Kindly suggest some alternative way for it apart from creating secondary index on table MSEG which would be my last option because already four secondary index are created in my present situation and also is it advisable to create fifth secondary index for my problem?? Would it affect my database performance?
Thanks in advance
RajHi Raj,
is that possible to use this query below ? You might ask to Functional whether is possible or not.
SELECT SINGLE belnr gjahr buzei INTO w_ekbe FROM ekbe
WHERE ebeln = it_mseg-ebeln
AND ebelp = it_mseg-ebelp
SELECT SINGLE menge FROM mseg INTO w_rejqty
WHERE mblnr EQ w_ekbe-belnr
AND mjahr EQ w_ekbe-gjahr
AND zeile EQ w_ekbe-buzei
Best Regards
Fernand -
Data extraction from shared table
Hello All,
I have a scenario where I have two different software systems (SAP and xyz systems), where a intermediate table will be created in between the two systems that is shared. Data will be updated by the xyz systems into this shared table. Now, my questions regarding this shared table.
1) Can we write some program or something to get the data from shared table to update the SAP?
2) If possible send me the suggestions
3) Please also send me the sample code to get the data from the shared table
Thanks in advance,
SDN poweredHI,
Where will this shared table resides ? In SAP system ? or any database ?
If any database, you can extract the data from there and update/insert the data into SAP table thru XI. For this you need to query the shared table with JDBC adapter and post the information...
It is easy, if you give the informations about shared system ..
Regards,
moorthy -
How to Extract data from Cluster table and transperant table
Hello BW Experts ,
I want to extract the data from cluster table BSEG and a transperant table BKPF .
The primary fields are BELNR , GJHAR and BUKRS.
the fields of table BKPF to extarct is BUDAT and fields of BSEG table is HKONT , BSCHL , ZUONR and POSID.
I can not create a view over these two tables as BSEG is a Cluster table.
Please guide me.
Regadrs ,
Amol.hi Amol,
take a look Sigg's weblog
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
you can use RSAX_BIW_GET_DATA_SIMPLE as sample, there specified import parameters
FUNCTION RSAX_BIW_GET_DATA_SIMPLE.
""Lokale Schnittstelle:
*" IMPORTING
*" VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*" VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*" VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*" VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*" VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*" TABLES
*" I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*" I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*" E_T_DATA STRUCTURE SFLIGHT OPTIONAL
*" EXCEPTIONS
*" NO_MORE_DATA
*" ERROR_PASSED_TO_MESS_HANDLER -
Extracting Data From a Table in Oracle
How would one extract the data from a table in oracle and put in ascii format file?
Do you use sql loader?http://asktom.oracle.com/pls/ask/f?p=4950:8:6139291395251309702::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:68212348056,
http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:464420312302 -
Help needed in extracting data from PCD tables
Hi Friends
I Have a requiremnt for creating custom portal activity report ,even though
we have standard report, the extraced data will be used to create bw reports later.
my part is to find a way to extract the data from PCD tables for creating
custom portal activity reports
i have selected the following tables for the data extraction
WCR_USERSTAT,WCR_WEBCONTENTSTAT,WCR_USERFIRSTLOGON,
WCR_USERPAGEUSAGE.
My questions are
1.Did i select the Exact PCD tables?
2.Can i use UME api for accessing the data from those tables?
3.can i use the data extracted from PCD tables in JSPdynpage or
webdynpro apps?
4.can i Querry the PCD tables from JSPDynpage or Webdynpro
Please help me in finding a solution for this
Thanks
Ashok BattulaHi daniel
Can u tell me weather i can develop the following custom reports from those WCR tables
Report Type
1 Logins
- Unique Count
- Total Count
- Most Active Users (by Partner Name)
- Most Active Users (by Contact Name)
- Entry Point (by page name)
- Session Time
- Hourly Traffic Analysis
2 Login Failures
- Total Count
- Count by error message
- Credentials Entered (by user name and password)
3 Content Views (by File Name)
- Unique Count
- Total Count
- Most requested Files
- Most requested Pages
- File Not Found
4 Downloads (by File Name)
- Unique Count
- Total Count
- Most requested Files
- File Not Found
5 Portal Administration
- Site Content (by file name)
- Site Content (by page name)
- Latest Content (by file name)
- Expired Content (by file name)
- Subscriptions Count (by file name)
6 Login History (by Partner, Contact Name)
- No Login
- First Login
- Duration between registration and first login
- Most Recent Login
- Average Number of Logins
plz help me in find ing a way
thanks
ashok -
JDBC-XI-FILE scenario. How to extract data from multiple tables
Hi,
At this moment I didn't have the access for XI system. So here I have some silly question. Could you please clarify the same ??
If I got to extract data from single table using JDBC adapter I can put the below query in communication channel
SELECT *FROM orders WHERE new='true'.
But if I got to extract data from multiple tables, logic to be used should be like as shown below. ( from previous thread------prabhu).
SELECT <Table_2>.EID, <Table_2>.FName, <Table_2>.LName, <Table_1>.REC_DAT, <Table_1>.DESCRP
FROM <Table_1> INNER JOIN <Table_2> on
<Table_1>.CARDNO = <Table_2>.CARD
where REC_DAT = <condition>
union
SELECT <Table_2>.EID, <Table_2>.FName, <Table_2>.LName, <Table_1>.REC_DAT, <Table_1>.DESCRP
FROM <Table_1> INNER JOIN <Table_2> on
<Table_1>.CARDNO = <Table_2>.CARD
where REC_DAT = <condition>
But my query is ........how to put the above entire code in one line. (i.e in Qery place of communication channel ) ??
Thanks
KumarHi Palnati,
You either use a select query with join or a stored procedure which will contain the logic to extract the data from multiple tables. But, the limitation in case of stored procedure is u can hv only one selct query in it.
You write ur actual query provided in the parameter 'Query SQL Statement". u can also wrt a stored procedure in it. Also, u can provide a update statement in it which will update a certain flag so tht u don selct the data again.
Check the following link
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm</a>
Regards,
Akshay
Message was edited by:
Akshay Salunke -
FM code for extracting data from 10 tables
Hi All,
I have a requirement, where i need to extract the data from 10 tables using FM which is further used to create a data source in SAP R3.
The fields are almost similar in all the tables but yet i have to fetch the data from all the tables.
My approach:
1. I have created a structure with all the fields in it from all the tables that comes to 35 fields.
2. create a structure of each table and loop it into an internal table and work area.
3. writing a read statement based on a key value from all the work areas and populate the same into my final structure.
Note: there is a key field that need to be considered when updating the data into final stucture.
All help on the code / logic would be appreciated.
Thanks
Moderator message : Spec/requirements dumping not allowed, show the work you have already done. Thread locked.
Edited by: Vinod Kumar on Feb 28, 2012 8:35 PMHi All,
I have a requirement, where i need to extract the data from 10 tables using FM which is further used to create a data source in SAP R3.
The fields are almost similar in all the tables but yet i have to fetch the data from all the tables.
My approach:
1. I have created a structure with all the fields in it from all the tables that comes to 35 fields.
2. create a structure of each table and loop it into an internal table and work area.
3. writing a read statement based on a key value from all the work areas and populate the same into my final structure.
Note: there is a key field that need to be considered when updating the data into final stucture.
All help on the code / logic would be appreciated.
Thanks
Moderator message : Spec/requirements dumping not allowed, show the work you have already done. Thread locked.
Edited by: Vinod Kumar on Feb 28, 2012 8:35 PM -
How to extract data from PCD tables to create custom activity report
Hi Friends
I have a requiremnt for creating custom portal activity report, even though we have
standard report for that, we need to extract the data from the following pcd tables
WCR_USERSTAT, WCR_WEBCONTENTSTAT,WCR_USERFIRSTLOGON,
WCR_USERPAGEUSAGE.
This extraced data will be used to create BW Reports.
my questions are
1.How to extract the data from pcd tables?
2.can i use UME API for extracting the data from the given PCD tables?
3.Can i querry the PCD tables from JSPdynpage or Webdynpro APP?
Please guide me.
Thanks in advance
AshokHi Kishore,
Refer to
http://wiki.sdn.sap.com/wiki/display/Snippets/DirectAccesstoDatabaseTables
http://wiki.sdn.sap.com/wiki/display/WDJava/OracleConnectivitywithEJBusingWebDynproApplication
JDBC Connectivity with Webdynpro and Max DB
Thanks
Prashant -
How can i extract the particular data from Base tables
Hi
I have some Base R/3- Tables . I need to exact the data from these base tables.
But i need to select some type of datarecords(eg: select Material Documents from MSEG and MKPF tables based on movement types 261,262).
Something like that . So how can i select the particular category datarecords from base tables. Anyway im going to create the Custom DataSource.
So please let me know . how can i extarct tha particular data from base tables
kumarHi Venkat
See i have some 5-tables . I need to extarct from these tables.
first i need to extract the data from one table fully.
Then i need to extarct the data from second table based on profict centers, company codes of first table.
Then i need to extract the data from third table based on profict centers of first table and movement type = 2p,2n,2s condition.
So how can i extarct like this data from multiple tables.
Please let me know
kumar -
Need to extract the data from the CRM table : SCAPPTSEG
Hi BW Experts,
I want to extract the Data from CRM Table "SCAPPTSEG" to BW. The dates are stored in UTC Format.So for getting the date in CET format, we have used the Function Module "IB_CONVERT_FROM_TIMESTAMP".
I want to create a datasource for extracting the data from "SCAPPTSEG" table and i need to use the function module for getting the date in CET Format.
Can i achieve this action through Generic Extraction.
please provide me the steps to achieve this.
Thanks,
Shahina.Anot answered
-
Extract of Data from Oracle in a Flat File with Column and Record seperator
I have a case where I have to extract whole data froma Oracle Table where the Columns should be seperated by |@|
and Records by ^*^.
The reason for this is My data has Space and New line in it. So My Program to recoganize each column and record I want them to be seperated by special chars.
Itried this but of no much help.
set echo off newpage 0 space 0 pagesize 0 feed off head off trimspool on;
spool on;
set colsep '|@|';
set recsepchar '^*^';
spool "T_COMPLAINT.dat";
select * from T_COMPLAINT where ROWNUM < '100' order by cptoid;
spool off;Having '@' and '*' characters in the data will not make any difference if you are using a combined column separator of '|@|' - provided any process you use subsequently can handle it.
However, the recsepchar parameter appears to be restricted to a single character which is repeated right across the page, so I don't think you could have a single iteration of '|*|' using this method:
SQL> set newpage 0 space 0 pagesize 0 feed off head off trimspool on
SQL> set recsep EACH
SQL> set recsepchar '*'
SQL> set colsep '|@|'
SQL> select * from testa;
A |@|1@ |@|22-JUN-2010
B |@|2* |@|22-JUN-2010
B |@|2* |@|22-JUN-2010
********************************************************************************Edited by: LindaA on 23-Jun-2010 08:33 -
How to dispaly datas from the table, base on the selection screen
hi there gurus,
im currently developing a stock aging report,
i have completed one program but it do not allow me to excutes the program althought the syntax is correct.
i would to get some ideas from you, regarding how to extract the datas from the tables?
my selction screen will be, mat number, date, and gl account.
and the out put datas are, mbew-matnr, makt-maktx, mbew-lbkum, mara_meins, mbew-salk3,and the consumptions for the past 12months and the values for it.
can u plz guide me with this,
thank you,.
this is kind of very urgent program that i need to finish , plz help me.here is the total code the i do
REPORT ZSTK_AGING_REP2.
*TABLES
TABLES: mseg,
mara,
makt,
SKAT,
SKA1,
MARV,
T001,
T030,
T149D,
AM07M,
MCMSEG,
T001K,
T001W,
T134M,
vbak,
mbew,
mcon, rmcb0, marc, t024w, mvke, v134w, t438a, propf, maprf, t000, t024e
, tvko.
DATA: BEGIN OF ta_material OCCURS 2,
werks LIKE mard-werks,
lgort LIKE mard-lgort,
matnr LIKE mard-matnr,
labst LIKE mard-labst,
umlme LIKE mard-umlme,
insme LIKE mard-insme,
einme LIKE mard-einme,
speme LIKE mard-speme,
retme LIKE mard-retme,
verpr LIKE mbew-verpr,
maktx LIKE makt-maktx,
meins LIKE mara-meins,
bukrs LIKE t001-bukrs,
konto LIKE t030-konts,
butxt LIKE t001-butxt,
txt50 LIKE skat-txt50,
MABTR LIKE MCMSEG-DMBTR,
SKBTR LIKE MCMSEG-DMBTR,
WAERS LIKE T001-WAERS,
WAER2 LIKE T001-WAERS,
BWKEY LIKE MBEW-BWKEY,
LBKUM LIKE MBEW-LBKUM,
MEINS LIKE MARA-MEINS,
SALK3 LIKE MBEW-SALK3,
WAERS1 LIKE T001-WAERS,
BUKRS1 LIKE T001-BUKRS,
KONTO1 LIKE T030-KONTS,
lbkum LIKE mbew-lbkum,
erdat LIKE vbak-erdat,
END OF ta_material.
DATA: BEGIN OF ta_mseg OCCURS 2,
mblnr LIKE mseg-mblnr,
*->Begin of KL02+ -
mjahr like mseg-mjahr,
zeile like mseg-zeile,
*->End of KL02+ -
meins LIKE mseg-meins,
menge LIKE mseg-menge,
werks LIKE mseg-werks,
lgort LIKE mseg-lgort,
matnr LIKE mseg-matnr,
budat LIKE mkpf-budat,
saknr LIKE SKA1-SAKNR,
END OF ta_mseg.
single recs based on MATNR
DATA: BEGIN OF i_matnr OCCURS 0,
werks LIKE mard-werks,
lgort LIKE mard-lgort,
matnr LIKE mard-matnr,
maktx LIKE makt-maktx,
mblnr LIKE mseg-mblnr,
verpr LIKE mbew-verpr,
labst LIKE mard-labst, "Valuated stock with
*unrestricted use
umlme LIKE mard-umlme, "Stock in transfer
*(from one storage location to another)
insme LIKE mard-insme, "Stock in quality
*inspection
einme LIKE mard-einme, "Total Stock of All
*Restricted Batches
speme LIKE mard-speme, "Blocked stock
retme LIKE mard-retme, "Blocked Stock Returns
meins LIKE mara-meins, "base unit
bukrs LIKE t001-bukrs,
konto LIKE t030-konts,
butxt LIKE t001-butxt,
txt50 LIKE skat-txt50,
MABTR LIKE MCMSEG-DMBTR,
SKBTR LIKE MCMSEG-DMBTR,
WAERS LIKE T001-WAERS,
WAER2 LIKE T001-WAERS,
BWKEY LIKE MBEW-BWKEY,
LBKUM LIKE MBEW-LBKUM,
MEINS LIKE MARA-MEINS,
SALK3 LIKE MBEW-SALK3,
WAERS1 LIKE T001-WAERS,
BUKRS1 LIKE T001-BUKRS,
KONTO1 LIKE T030-KONTS,
lbkum LIKE mbew-lbkum,
END OF i_matnr.
recs based on MBLNR
DATA: BEGIN OF i_mblnr OCCURS 0,
mblnr LIKE mseg-mblnr,
werks LIKE mseg-werks,
lgort LIKE mseg-lgort,
matnr LIKE mseg-matnr,
menge LIKE mseg-menge,
meint LIKE mseg-meins,
budat LIKE mkpf-budat,
bukrs LIKE t001-bukrs,
konts LIKE t030-konts,
butxt LIKE t001-butxt,
txt50 LIKE skat-txt50,
MABTR LIKE MCMSEG-DMBTR,
SKBTR LIKE MCMSEG-DMBTR,
WAERS LIKE T001-WAERS,
WAER2 LIKE T001-WAERS,
BWKEY LIKE MBEW-BWKEY,
LBKUM LIKE MBEW-LBKUM,
MEINS LIKE MARA-MEINS,
SALK3 LIKE MBEW-SALK3,
WAERS1 LIKE T001-WAERS,
BUKRS1 LIKE T001-BUKRS,
KONTO1 LIKE T030-KONTS,
END OF i_mblnr.
TYPES: BEGIN OF t_mat,
lgort LIKE mseg-lgort,
werks LIKE mseg-werks,
matnr LIKE mseg-matnr,
mblnr LIKE mseg-mblnr,
maktx LIKE makt-maktx,
meins LIKE mara-meins,
meng0 LIKE mbew-lbkum,
value0 LIKE mbew-salk3,
meng0 LIKE mard-labst, "0 to 10 days
value0 LIKE mseg-dmbtr,
meng1 LIKE mard-labst, "11 to 30 days
value1 LIKE mseg-dmbtr,
meng2 LIKE mard-labst, "31 to 60 days
value2 LIKE mseg-dmbtr,
meng3 LIKE mard-labst, "61-90
value3 LIKE mseg-dmbtr,
meng4 LIKE mard-labst, "90 days onwards
value4 LIKE mseg-dmbtr,
END OF t_mat.
DATA: i_mat2 TYPE t_mat OCCURS 0 WITH HEADER LINE.
TYPES: BEGIN OF t_mat2,
lgort LIKE mard-lgort, " storage location
cnt0(5),
cnt1(5),
cnt2(5),
cnt3(5),
cnt4(5),
meng0 LIKE mbew-lbkum,
value0 LIKE mbew-salk3,
meng0 LIKE mard-labst, "0 to 10 days
value0 LIKE mseg-dmbtr,
meng1 LIKE mard-labst, "11 to 30 days
value1 LIKE mseg-dmbtr,
meng2 LIKE mard-labst, "31 to 60 days
value2 LIKE mseg-dmbtr,
meng3 LIKE mard-labst, "61-90
value3 LIKE mseg-dmbtr,
meng4 LIKE mard-labst, "90 days onwards
value4 LIKE mseg-dmbtr,
END OF t_mat2.
DATA: i_matsum TYPE t_mat2 OCCURS 0 WITH HEADER LINE.
DATA: w_mengb TYPE mbew-lbkum,
w_workqyt TYPE mbew-lbkum,
w_index TYPE sy-tabix,
*DATA: w_mengb TYPE mard-labst, "tmp Balance qty
w_workqty TYPE mard-labst, "Work qty
w_index TYPE sy-tabix,
w_days(5) TYPE n, "duration difference (days)
w_mths(5) TYPE n, "duration difference (mths)
w_dat1 TYPE sy-datum, "date
w_dat2 TYPE sy-datum, "today's date
w_detl(1) TYPE c,
w_summ(1) TYPE c,
w_denom TYPE i,
w_numer TYPE i,
w_conv TYPE i,
w_ttlcnt TYPE i,
w_cnt TYPE i,
v_topofpage(1),
w_meng LIKE mard-labst,
w_meng LIKE mbew-lbkum,
*sapscript values
w_title(20) TYPE c. "Summary / Detail Report
DATA: lv_peinh LIKE mbew-peinh, "Price Unit
lv_verpr LIKE mbew-verpr. "Moving Price
proram comes here
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_werks FOR mseg-werks,
s_lgort FOR mseg-lgort,
s_matnr FOR mara-matnr,
s_saknr FOR ska1-saknr,
S_ERDAT FOR VBAK-ERDAT.
PARAMETERS: pck_detl RADIOBUTTON GROUP rep1,
pck_summ RADIOBUTTON GROUP rep1,
pck_dtsm RADIOBUTTON GROUP rep1 DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK blk1.
top of the page
TOP-OF-PAGE.
PERFORM f_top_of_page.
FORM f_top_of_page .
IF v_topofpage = 'D'.
*-->Report header for detail report
WRITE:/2 'Printed By :', sy-uname,
80 'Stock Aging Report - Detail',
180 'Printed on:', sy-datum, sy-timlo,
220 'Page:', sy-pagno.
WRITE:/,/,/.
WRITE:/2 'Storage',
10 'Matl ID',
22 'Matl Description',
61 'UOM',
78 '<--=<QTY ON THIS DATE -->',
78 '<-- =< 10 days -->',
112 '<--11 to 30 days -->',
148 '<--31 to 60 days -->',
181 '<--61 to 90 days -->',
216 '<-- > 90 days -->',
/2 'Location',
76 'Qty',
92 'Value'.
112 'Qty',
128 'Value',
148 'Qty',
164 'Value',
181 'Qty',
195 'Value',
216 'Qty',
231 'Value'.
WRITE:/2 sy-uline(235).
ELSE.
*-->Report header for Summary report
WRITE:/2 'Printed By :', sy-uname,
80 'Stock Aging Report - Summary',
180 'Printed on:', sy-datum, sy-timlo,
220 'Page:', sy-pagno.
WRITE:/,/,/.
WRITE:/2 'Storage',
10 'Matl ID',
22 'Matl Description',
61 'UOM',
78 '<--< QTY ON THIS DATE -->',
78 '<-- < 10 days -->',
112 '<--11 to 30 days -->',
148 '<--31 to 60 days -->',
181 '<--61 to 90 days -->',
216 '<-- > 90 days -->',
/2 'Location',
76 'Qty',
92 'Value'.
112 'Qty',
128 'Value',
148 'Qty',
164 'Value',
181 'Qty',
195 'Value',
216 'Qty',
231 'Value'.
WRITE:/2 sy-uline(235).
ENDIF.
ENDFORM. " f_top_of_page
*start-of-selection
*PERFOM f_data_selection.
FORM f_data_selection.
SELECT a~werks
a~lgort
a~matnr
a~saknr
a~lbkum
a~erdat
a~labst
a~umlme
a~insme
a~einme
a~speme
a~retme
b~verpr "this field no long been used
c~maktx
d~meins
INTO CORRESPONDING FIELDS OF TABLE ta_material
FROM mard AS a
INNER JOIN makt AS c ON amatnr = cmatnr
INNER JOIN mara AS d ON amatnr = dmatnr
WHERE a~matnr IN s_matnr
AND a~werks IN s_werks
AND a~lgort IN s_lgort
AND a~saknr IN s_saknr
AND a~erdat IN s_erdat
AND c~spras = 'EN'.
*--> SC01 - End of Insertion **
*-->Select material documents
SELECT a~mblnr
a~mjahr
a~zeile
a~meins
a~menge
a~werks
a~lgort
a~matnr
b~budat
INTO CORRESPONDING FIELDS OF TABLE ta_mseg
FROM mseg AS a INNER JOIN mkpf AS b
ON amblnr = bmblnr
AND amjahr = bmjahr
FOR ALL ENTRIES IN ta_material
WHERE matnr = ta_material-matnr
AND a~werks = ta_material-werks
AND a~lgort = ta_material-lgort
AND algort NE aumlgo
AND a~shkzg = 'S'
AND a~smbln EQ space
AND a~smblp EQ space.
*--> SC03 - Start of Insertion **
If MBLNR exist in MSEG-SMBLN and this
record's SHKZG = 'H'. Remove it from the table.
This is becuase this particular record has already been reverse.
LOOP AT ta_mseg.
SELECT SINGLE *
FROM mseg
WHERE smbln = ta_mseg-mblnr
*->Begin of KL02+ -
and SMBLP = ta_mseg-zeile.
AND shkzg = 'H'. "return. " KL02-
*->End of KL02+ -
IF sy-subrc = 0.
DELETE ta_mseg.
ENDIF.
ENDLOOP.
*--> SC03 - Enf of Insertion **
ENDFORM. " f_data_selection
*IMPORTANT , NEED TO CHECK LATER
FORM f_data_preparation.
*-->Append data for report details
LOOP AT ta_material.
DATA: ta_msegtemp LIKE ta_mseg OCCURS 2 WITH HEADER LINE.
*-->Loop at all material documents into a temp table
REFRESH ta_msegtemp. CLEAR ta_msegtemp.
LOOP AT ta_mseg WHERE matnr = ta_material-matnr AND
werks = ta_material-werks AND
lgort = ta_material-lgort.
ta_msegtemp = ta_mseg. APPEND ta_msegtemp.
ENDLOOP.
*-->Add up all the stock for the material
CLEAR w_mengb.
w_mengb = ta_material-labst +
ta_material-umlme +
ta_material-insme +
ta_material-einme +
ta_material-speme +
ta_material-retme.
IF w_mengb IS INITIAL.
CONTINUE.
ENDIF.
*-->sort msegtemp by posting date
SORT ta_msegtemp BY budat DESCENDING.
*-->get the values from the material documents into the report output
LOOP AT ta_msegtemp.
*->Begin of KL02- -
CALL FUNCTION 'HRCM_TIME_PERIOD_CALCULATE'
EXPORTING
begda = ta_msegtemp-budat
endda = sy-datum
IMPORTING
NOYRS =
nomns = w_mths
nodys = w_days
EXCEPTIONS
invalid_dates = 1
overflow = 2
OTHERS = 3
*->End of KL02- -
*->Begin of KL02+ -
*-->Get the days difference btw two dates
clear w_days.
w_days = sy-datum - ta_msegtemp-budat.
*--> Include today's date into calculation
w_days = w_days + 1.
*->End of KL02+ -
check base unit, do conversion
IF ta_material-meins <> ta_msegtemp-meins.
CALL FUNCTION 'MD_CONVERT_MATERIAL_UNIT'
EXPORTING
i_matnr = ta_material-matnr
i_in_me = ta_msegtemp-meins
i_out_me = ta_material-meins
i_menge = ta_msegtemp-menge
IMPORTING
e_menge = ta_msegtemp-menge
EXCEPTIONS
error_in_application = 1
error = 2
OTHERS = 3.
ENDIF.
*--> SC01 - Start of Insertion **
SELECT SINGLE peinh
verpr
INTO (lv_peinh,
lv_verpr)
FROM mbew
WHERE matnr = ta_material-matnr
AND bwkey = ta_material-werks.
IF sy-subrc = 0.
ta_material-verpr = lv_verpr.
ENDIF.
*--> SC01 - End of Insertion **
*-->check whether the mseg value is LE than the stock value
IF ta_msegtemp-menge LE w_mengb.
*-->Days < 10 days
IF w_days LE 1 AND w_days EQ 366.
i_mat2-meng0 = i_mat2-meng0 + ta_msegtemp-menge.
IF NOT lv_peinh EQ 0.
i_mat2-value0 = ( i_mat2-meng0 / lv_peinh ) *
ta_material-verpr."+SC01
ENDIF.
**-->Days 11 - 30 days
ELSEIF w_days >= 11 AND w_days =< 30.
i_mat2-meng1 = i_mat2-meng1 + ta_msegtemp-menge.
IF NOT lv_peinh EQ 0.
i_mat2-value1 = ( i_mat2-meng1 / lv_peinh ) *
*ta_material-verpr."+SC01
ENDIF.
**-->Days 31-60 days
ELSEIF w_days >= 31 AND w_days =< 60.
i_mat2-meng2 = i_mat2-meng2 + ta_msegtemp-menge.
IF NOT lv_peinh EQ 0.
i_mat2-value2 = ( i_mat2-meng2 / lv_peinh ) *
*ta_material-verpr."+SC01
ENDIF.
**-->Days 61-90 days
ELSEIF w_days >= 61 AND w_days =< 90.
i_mat2-meng3 = i_mat2-meng3 + ta_msegtemp-menge.
IF NOT lv_peinh EQ 0.
i_mat2-value3 = ( i_mat2-meng3 / lv_peinh ) *
*ta_material-verpr.
ENDIF.
**-->Days > 90 days
ELSEIF w_days > 90.
i_mat2-meng4 = i_mat2-meng4 + ta_msegtemp-menge.
IF NOT lv_peinh EQ 0.
i_mat2-value4 = ( i_mat2-meng4 / lv_peinh ) *
*ta_material-verpr.
ENDIF.
ENDIF.
*->End of KL002+
w_mengb = w_mengb - ta_msegtemp-menge.
ELSE.
IF NOT w_mengb LE 0 .
IF NOT lv_peinh EQ 0.
**->End of KL001+
i_mat2-value0 = ( i_mat2-meng0 / lv_peinh )
*ta_material-verpr."+SC01
**->Begin of KL001+
ENDIF.
ELSEIF w_days GE 22.
i_mat2-meng3 = i_mat2-meng3 + w_mengb.
IF NOT lv_peinh EQ 0.
i_mat2-value3 = ( i_mat2-meng3 / lv_peinh )
*ta_material-verpr.
ENDIF.
**->End of KL001+
ENDIF.
**--> SC02 - End of Insertioin **
ENDIF.
*->End of KL002-
*->Begin of KL002+
*--> < 10 days
IF w_days EQ 1 AND w_days LE 366.
i_mat2-meng0 = i_mat2-meng0 + ta_msegtemp-menge.
IF NOT lv_peinh EQ 0.
i_mat2-value0 = ( i_mat2-meng0 / lv_peinh ) *
ta_material-verpr."+SC01
ENDIF.
ELSEIF w_days >= 11 AND w_days =< 30.
i_mat2-meng1 = i_mat2-meng1 + w_mengb.
IF NOT lv_peinh EQ 0.
i_mat2-value1 = ( i_mat2-meng1 / lv_peinh ) *
*ta_material-verpr.
ENDIF.
**--> 31 - 60 days
ELSEIF w_days >= 31 AND w_days =< 60.
i_mat2-meng2 = i_mat2-meng2 + w_mengb.
IF NOT lv_peinh EQ 0.
i_mat2-value2 = ( i_mat2-meng2 / lv_peinh ) *
*ta_material-verpr.
ENDIF.
**--> 61 - 90 days
ELSEIF w_days >= 61 AND w_days =< 90.
i_mat2-meng3 = i_mat2-meng3 + w_mengb.
IF NOT lv_peinh EQ 0.
i_mat2-value3 = ( i_mat2-meng3 / lv_peinh ) *
*ta_material-verpr.
ENDIF.
**--> > 90 days
ELSEIF w_days > 90.
i_mat2-meng4 = i_mat2-meng4 + w_mengb.
IF NOT lv_peinh EQ 0.
i_mat2-value4 = ( i_mat2-meng4 / lv_peinh ) *
*ta_material-verpr.
ENDIF.
ENDIF.
*->End of KL002+
w_mengb = 0.
ENDIF. " check stock value NE zero
ENDIF. "check Mat doc amount is LE than the stock value
ENDIF.
ENDLOOP. " msegtemp
*-->append i_mat2 values
i_mat2-werks = ta_material-werks.
i_mat2-lgort = ta_material-lgort.
i_mat2-matnr = ta_material-matnr.
i_mat2-maktx = ta_material-maktx.
i_mat2-meins = ta_material-meins.
APPEND i_mat2. CLEAR i_mat2.
ENDLOOP. " ta_material
*-->Append data for summary data
DATA: i_lgort LIKE i_mat2 OCCURS 2 WITH HEADER LINE.
i_lgort[] = i_mat2[].
SORT i_lgort BY werks lgort.
DELETE ADJACENT DUPLICATES FROM i_lgort COMPARING werks lgort.
DATA: v_cnt0(5), v_cnt1(5), v_cnt2(5), v_cnt3(5), v_cnt4(5),
v_value0 LIKE i_matsum-value0.
v_value1 LIKE i_matsum-value1,
v_value2 LIKE i_matsum-value2,
v_value3 LIKE i_matsum-value3,
v_value4 LIKE i_matsum-value4.
LOOP AT i_lgort.
CLEAR v_cnt0. CLEAR v_value0.
CLEAR v_cnt1. CLEAR v_value1.
CLEAR v_cnt2. CLEAR v_value2.
CLEAR v_cnt3. CLEAR v_value3.
CLEAR v_cnt4. CLEAR v_value4.
LOOP AT i_mat2 WHERE lgort = i_lgort-lgort AND
werks = i_lgort-werks.
IF NOT i_mat2-meng0 IS INITIAL.
v_cnt0 = v_cnt0 + 1.
v_value0 = v_value0 + i_mat2-value0.
ENDIF.
IF NOT i_mat2-meng1 IS INITIAL.
v_cnt1 = v_cnt1 + 1.
v_value1 = v_value1 + i_mat2-value1.
ENDIF.
IF NOT i_mat2-meng2 IS INITIAL.
v_cnt2 = v_cnt2 + 1.
v_value2 = v_value2 + i_mat2-value2.
ENDIF.
IF NOT i_mat2-meng3 IS INITIAL.
v_cnt3 = v_cnt3 + 1.
v_value3 = v_value3 + i_mat2-value3.
ENDIF.
IF NOT i_mat2-meng4 IS INITIAL.
v_cnt4 = v_cnt4 + 1.
v_value4 = v_value4 + i_mat2-value4.
ENDIF.
ENDLOOP.
CLEAR i_matsum.
i_matsum-lgort = i_mat2-lgort.
IF v_cnt0 NE space.
i_matsum-cnt0 = v_cnt0.
i_matsum-value0 = v_value0.
APPEND i_matsum.
ENDIF.
CLEAR i_matsum.
i_matsum-lgort = i_mat2-lgort.
IF v_cnt1 NE space.
i_matsum-cnt1 = v_cnt1.
i_matsum-value1 = v_value1.
APPEND i_matsum.
ENDIF.
CLEAR i_matsum.
i_matsum-lgort = i_mat2-lgort.
IF v_cnt2 NE space.
i_matsum-cnt2 = v_cnt2.
i_matsum-value2 = v_value2.
APPEND i_matsum.
ENDIF.
CLEAR i_matsum.
i_matsum-lgort = i_mat2-lgort.
IF v_cnt3 NE space.
i_matsum-cnt3 = v_cnt3.
i_matsum-value3 = v_value3.
APPEND i_matsum.
ENDIF.
CLEAR i_matsum.
i_matsum-lgort = i_mat2-lgort.
IF v_cnt4 NE space.
i_matsum-cnt4 = v_cnt4.
i_matsum-value4 = v_value4.
APPEND i_matsum.
ENDIF.
ENDLOOP.
ENDFORM. "f_data_preparation
*IMPORTANT , NEED TO CHECK LATER
FORM f_display_data .
IF pck_dtsm = 'X'.
*-->Display detail
v_topofpage = 'D'.
PERFORM f_display_detail.
*-->display summary
v_topofpage = 'S'.
NEW-PAGE.
PERFORM f_display_summary.
ELSEIF pck_detl = 'X'.
*-->Display detail
v_topofpage = 'D'.
PERFORM f_display_detail.
ELSEIF pck_summ = 'X'.
*-->display summary
v_topofpage = 'S'.
PERFORM f_display_summary.
ENDIF.
ENDFORM. " f_display_data
FORM f_display_detail .
v_topofpage = 'D'.
SORT i_mat2 BY werks lgort.
*DATA: v_count(5),
DATA: v_count,
v_va1 LIKE i_mat2-value0.
v_va2 LIKE i_mat2-value0,
v_va3 LIKE i_mat2-value0,
v_va4 LIKE i_mat2-value0,
v_va5 LIKE i_mat2-value0.
LOOP AT i_mat2.
WRITE:/2 i_mat2-lgort,
10 i_mat2-matnr,
22 i_mat2-maktx(38),
61 i_mat2-meins,
64 i_mat2-meng0,
82 i_mat2-value0.
100 i_mat2-meng1,
118 i_mat2-value1,
136 i_mat2-meng2,
154 i_mat2-value2,
169 i_mat2-meng3,
186 i_mat2-value3,
204 i_mat2-meng4,
222 i_mat2-value4.
*-->Set counter and add up all values by lgort
v_count = v_count + 1.
v_va1 = v_va1 + i_mat2-value0.
v_va2 = v_va2 + i_mat2-value1.
v_va3 = v_va3 + i_mat2-value2.
v_va4 = v_va4 + i_mat2-value3.
v_va5 = v_va5 + i_mat2-value4.
AT END OF lgort.
WRITE:/10 'Cnt:',
15 v_count,
55 'Subtotal',
82 v_va1.
118 v_va2,
154 v_va3,
186 v_va4,
222 v_va5.
CLEAR v_count. CLEAR v_va1.
CLEAR v_va2. CLEAR v_va3. CLEAR v_va4. clear v_va5.
ENDAT.
ENDLOOP.
ENDFORM. " f_display_detail
FORM f_display_summary .
v_topofpage = 'S'.
LOOP AT i_matsum.
IF NOT i_matsum-cnt0 IS INITIAL.
WRITE:/2 i_matsum-lgort,
10 'Cnt:',15 i_matsum-cnt0,
82 i_matsum-value0.
ENDIF.
IF NOT i_matsum-cnt1 IS INITIAL.
WRITE:/2 i_matsum-lgort,
10 'Cnt:',15 i_matsum-cnt1,
118 i_matsum-value1.
ENDIF.
IF NOT i_matsum-cnt2 IS INITIAL.
WRITE:/2 i_matsum-lgort,
10 'Cnt:',15 i_matsum-cnt2,
154 i_matsum-value2.
ENDIF.
IF NOT i_matsum-cnt3 IS INITIAL.
WRITE:/2 i_matsum-lgort,
10 'Cnt:', 15 i_matsum-cnt3,
186 i_matsum-value3.
ENDIF.
IF NOT i_matsum-cnt4 IS INITIAL.
WRITE:/2 i_matsum-lgort,
10 'Cnt:', 15 i_matsum-cnt4,
222 i_matsum-value4.
ENDIF.
ENDLOOP.
ENDFORM. " f_display_summary
Maybe you are looking for
-
Multiple apps only working in Safe Mode since 10.9.1 update
Hey guys! I recently updated to 10.9.1 and at first, everything seemed find, but slowly I discovered that some apps crash the moment they are launched. The list of crashing apps includes (but is not limited to) CodeKit, GeekTool Helper, AppCleaner, C
-
How to refer the 1st page's 2nd text field from the 2nd page in Java scrip?
Hello I am developing an VISITOR info interactive form with webdynpro ABAP, its with 2 pages. Their heirarchy is, VISITOR_form | | |------Page_1 | | | | | |------Text_Field_A_1 |
-
E-mail error Time Machine backup
My old iMac crashed - so I bought me a new iMac 27" 1 day ago. I used Time Machine backup to transfer from external harddisk, and everything works well, exept MAIL. All my 17000 mails got transfered, but when I start up the MAIL program, I can only s
-
As I stated I am 67 and not really into technolgy so I was wondering what and if i musy do to get the mini ipad to work for me. Thanks so much. I aplogize for my lack of knowledge. Thank you.
-
I have found what seems like a bug in the JDK1.6+ getProperties when running as an Applet java_home property returned as an application. E:\Program Files\Java\jre1.6.0_02 But as an Applet it is Wrong... E:\PROGRA~1\Java\JRE16~2.0_0 If you rely on thi