Extraction problem - selection conditions for data load using abap program

Hi All,
I have a problem loading data over a selected period where the selection of date range is done using ABAP routine (type 6). Here though in the request header tab in monitor screen i'm able to see the selection date range populated correctly, no records are being extracted. But if i delete the abap filter and directly give the same date range for selection we are able to extract data. if any body has faced similar problem and have a solution for it please help me with yur suggestion.
Thanks,
nithin.

It seems the the data range is not properly set in the routine.
You can check the value of selection period generated by routine in the data selection tab-> execute button is there .
Click it to to test the selection values generated by the ABAP routine..
If the value here seems correct one then paste the code of the routine that u have written with brief logic details that u have applied.
Sonal.....

Similar Messages

Is it possible to reset password for any user using abap program

Hi friends,
Is it possible to reset password for any user using abap program by specifying client number and user id. in selection screen.
if any code for that to reset password please mail me.
Thanks & Regards,
Yogesh

Hello Yogesh,
Yes you can reset the password for any body using ABAP Code. But for that you really don't need any client number.
If this process is on regular basis, then recommended is to use BAPI for changing the user details Otherwise BDC also works fine.
=> Function Module - BAPI_USER_CHANGE
Call this in the program for resetting the password.
=> CALL TRANSACTION 'SU01' USING InternalTable
This will be executed in the BDC of SU01 transaction recording. Use the Password Change button in the application toolbar of transaction while recording.
Hope this helps.
PS If the answer solves your query, plz close the thread by marking it solved and rewarding each reply.
Regards

Changing Field Label length for Data Element using ABAP code.

Hi Experts,
We have a scenario where we have to update the maximum length of the various Field Labels (Short, Medium, Long..) for a Data Element using ABAP code.
Does anyone know how to do this ? Is there a Function Module available for this purpose ?
Appreciate your valuable inputs.

Hi ,
Use the view
DD03M
Give
TABNAME as table name,
DDLANGUAGE = EN / sy-langu
and order by position. (for correct sequencing)
You will get description of the fields (short,medium, long etc). You will also get the length and other details.

Calculate Withholding taxes for VEndor Invoices using ABAP program.

Hi All,
I have to upload Vendor Invoices using FB60/Fb01 tcodes. I am able to post the Invoices using FB01/Fb60
but I have to calculate extended withholding taxes also using this program for the Invoices.
Is it possible to upload vendor Invoices and calculate withholding taxes using Program?
If yes,
Does anyone has any idea how do you calculate extended withholding taxes using any BAPI's?
I have used these two BAPI's
BAPI_ACC_DOCUMENT_POST
BAPI_acc_invoice_receipt_post
they are working fine but without withholding tax.
This is a requirement for country India.
Regards,
Sushil

Hi,
Imho, you need to get (meaning, extract into separate fields) the different supplier types from Table1 first. Your key for Table1 is the vendor no, which is also the key in Table2 (or the key for Table2 is Vendor no & Type).
For better performance, better select multiple/all required entries from Table1 instead of doing a select endselect.
Depending on the format of the vendortypes in Table1, put them in a new itab (for our purpose named Table1New where vendor no & type are the only 2 fields. For example, if the type length is fixed to 2 chars, or divided by space,... use your coding accordingly.
Next step is to select all vendor no's in Table2 which you have selected in Table1. If in Table2, the vendor no is the only key (and the all vendor types are filled in a single record), then loop check the vendor types from Table1New against the types in Table2.
If the key of Table2 is vendor no & vendor type, then do a read table for the key.
The logic in pseudo-code:
Select from Table1 into table. If you'd like to limit the selection size, add package size statement.
     extract the vendor types in to itab Table1New.
     Select the vendor & types from Table2 by using the for all entries option (better performance).
     loop at Table1New
          check in Table2:
               if the unique key is vendor no: check all fields for the vendor type from Table1New
               if the unique key combo is vendor no & type: check by using a read table.
          If not found => add entry to Table2
     endloop.
endselect Table1 (when using package size)
I guess the most difficult step is to extract the types from Table1 into separate fields, all the rest seems straight forward. Please keep in mind the itab type definitions for a better performance.
Good luck!
Best regards,
Zhou

Not able to put data selection condition in data selection tab of infopakag

I was loading data from data source as data mart ( export data sauce from ODS) to other ODS.
when I tried to do delta Initialization with data transfer , I am not able to put data selection condition in data selection tab of infopakage.
when I choose Full Update in Update tab . It enables data selection fields in data selection tab. and I could put the condition.
I have checked in transfer structure as well , the fields are marked for selection.
Please advice .
Please tell me what could be the reason for this problem

Ashutosh,
As you are doing delta upload the data selection tab will be disabled, if you want to do the selective load then you need to do init update with your selection.
When you do the full updtae then definitely the data selection tab will be enabled for all the objects.
Hope this helps...
*******Assign Points if it helps********
Thanks,
Gattu

Missing Standard Dimension Column for data load (MSSQL to Essbase Data)

This is similar error to one posted by Sravan -- however I'm sure I have all dimensions covered -- going from MS SQL to SunOpsys Staging to Essbase. It is telling me missing standard dimension, however I have all accounted for:
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last): File "<string>", line 23, in ? com.hyperion.odi.essbase.ODIEssbaseException: Missing standard dimension column for data load
at com.hyperion.odi.essbase.ODIEssbaseDataWriter.loadData(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
I'm using multiple time period inputs -- BegBalance,Jul,Aug,Sep,Oct,Nov,Dec,Jan,Feb,Mar,Apr,May,Jun (target has all of those in place of Time Periods)
I'm using hard coded input mapping for Metric, Scenario, Version, HSP_Rates and Currencies. -> 'Amount', 'Actual', 'Final', 'HSP_InputValue','Local' respectively.
The only thing I can think of is that since I'm loading to each of the months in the Time Periods dimension (the reversal was set up to accomodate that)... and now its somehow still looking for that? Time Periods as a dimension does not show up in the reversal -- only the individual months named above.
Any ideas on this one??

John -- I extracted the data to a file and created a data load rule in Essbase to load the data. All dimensions present and accounted for (five header items as similar here) and everything loads fine.
So not sure what else is wrong -- still getting the missing dimension error.
Any other thoughts?? Here's the entire error message. Thanks for all your help on this.
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 23, in ?
com.hyperion.odi.essbase.ODIEssbaseException: Missing standard dimension column for data load
     at com.hyperion.odi.essbase.ODIEssbaseDataWriter.loadData(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
     at org.python.core.PyMethod.__call__(PyMethod.java)
     at org.python.core.PyObject.__call__(PyObject.java)
     at org.python.core.PyInstance.invoke(PyInstance.java)
     at org.python.pycode._pyx8.f$0(<string>:23)
     at org.python.pycode._pyx8.call_function(<string>)
     at org.python.core.PyTableCode.call(PyTableCode.java)
     at org.python.core.PyCode.call(PyCode.java)
     at org.python.core.Py.runCode(Py.java)
     at org.python.core.Py.exec(Py.java)
     at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.k(e.java)
     at com.sunopsis.dwg.cmd.g.A(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
Caused by: com.hyperion.odi.essbase.ODIEssbaseException: Missing standard dimension column for data load
     at com.hyperion.odi.essbase.ODIEssbaseDataWriter.validateColumns(Unknown Source)
     ... 32 more
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Missing standard dimension column for data load
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.k(e.java)
     at com.sunopsis.dwg.cmd.g.A(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)

Select-options for date field.

Hi all,
i need to give select options for Date field.How can i give that.
Thanks & Regards
Ravi.

Hi Ravi,
Use the Component WDR_SELECT_OPTIONS to include select options in Web Dynpro ABAP. Follow these steps:
1. In your Component , "Used Componet" tab add Component WDR_SELECT_OPTIONS . Component Use can be any name that you want to give, eg SELECT_OPTIONS
2. Go to the View where you want to include the Date Select Options. I am assuming that you already have an Attribute of Type DATS in your context.
3. View: Properties Tab:Create Controller Usage and select
SELECT_OPTIONS     WDR_SELECT_OPTIONS
SELECT_OPTIONS     WDR_SELECT_OPTIONS     INTERFACECONTROLLER
4. View Layout Tab:Include a View Container. In this view container we will show the Date Select Options.
5. View Attributes Tab: Create Following two attributes:
M_HANDLER type IF_WD_SELECT_OPTIONS
M_WD_SELECT_OPTIONS type IWCI_WDR_SELECT_OPTIONS
6: View Methods Tab: Create a method eg CREATE_SELECTION_SCREEN. Call this method in the WDDOINIT of the view.
7:CREATE_SELECTION_SCREEN: Write following Code:
* Data Declaration
data:
        lt_range_table TYPE REF TO DATA.
data:
        lr_componentcontroller TYPE REF TO IG_COMPONENTCONTROLLER,
        lr_componentusage TYPE REF TO IF_WD_COMPONENT_USAGE.
* Execution
* Create Used Component
lr_componentusage = wd_this->wd_cpuse_select_options( ).
if LR_COMPONENTUSAGE->HAS_ACTIVE_COMPONENT( ) is initial.
    lr_componentusage->create_component( ).
endif.
* Get pointer to interface controller of select options
wd_this->M_WD_SELECT_OPTIONS = wd_this->wd_cpifc_select_options( ).
* initialize selction screen
wd_this->M_HANDLER = wd_this->M_WD_SELECT_OPTIONS->init_selection_screen( ).
* Create Range Table for: Date
CALL METHOD WD_THIS->M_HANDLER->CREATE_RANGE_TABLE
    EXPORTING
      I_TYPENAME     = 'DATS'
    RECEIVING
      RT_RANGE_TABLE = lt_range_table.
* Add Selection Field for: Date
CALL METHOD WD_THIS->M_HANDLER->ADD_SELECTION_FIELD
    EXPORTING
      I_ID                         = '<name of date attribute in the context>'
*      I_WITHIN_BLOCK               = MC_ID_MAIN_BLOCK
*      I_DESCRIPTION                =
*      I_IS_AUTO_DESCRIPTION        = ABAP_TRUE
      IT_RESULT                    = lt_range_table
*      I_OBLIGATORY                 = ABAP_FALSE
*      I_COMPLEX_RESTRICTIONS       =
*      I_USE_COMPLEX_RESTRICTION    = ABAP_FALSE
*      I_NO_COMPLEX_RESTRICTIONS    = ABAP_FALSE
*      I_VALUE_HELP_TYPE            = IF_WD_VALUE_HELP_HANDLER=>CO_PREFIX_NONE
*      I_VALUE_HELP_ID              =
*      I_VALUE_HELP_MODE            =
*      I_VALUE_HELP_STRUCTURE       =
*      I_VALUE_HELP_STRUCTURE_FIELD =
*      I_HELP_REQUEST_HANDLER       =
*      I_LOWER_CASE                 =
*      I_MEMORY_ID                  =
*      I_NO_EXTENSION               = ABAP_FALSE
*      I_NO_INTERVALS               = ABAP_FALSE
*      I_AS_CHECKBOX                = ABAP_FALSE
*      I_AS_DROPDOWN                = ABAP_FALSE
*      IT_VALUE_SET                 =
*      I_READ_ONLY                  = ABAP_FALSE
*      I_DONT_CARE_VALUE            =
*      I_EXPLANATION                =
      I_TOOLTIP                    = 'Select Date'.
8: To Fetch Data entered in the selection field, write following code on action of button click:
data:
        lt_date type REF TO DATA.
FIELD-SYMBOLS:
                 <fs_date> TYPE table.
* retrieve Date from Select Options
CALL METHOD WD_THIS->M_HANDLER->GET_RANGE_TABLE_OF_SEL_FIELD
    EXPORTING
      I_ID           = '<attrib_name>'
    RECEIVING
      RT_RANGE_TABLE = lt_date.
* assign Date Field Symbol
ASSIGN lt_date->* to <fs_date>.
9: Windows Window Tab: In the View Conatiner, embed the WND_SELECTION_SCREEN view from SELECT_OPTIONS component Usage of WDR_SELECT_OPTIONS component.
Regards,
Reema.

Select option for date

i want give default values in select option for date (for a period)
I used
SELECT-OPTIONS y_s_mnth FOR y_v_dt_month default first to last OPTION BT.
first and last are dates.
I am getting error dialog box....specify ranges...
Please give sample code..

Hi Suhas,
I hope this code will help you. Reward me if it is helpful.
select-options : y_s_mnth FOR sy-datum.
initialization.
y_s_mnth-sign   = 'I'.
y_s_mnth-option = 'BT'.
y_s_mnth-low    = sy-datum - 30.    "first_day
y_s_mnth-high   = sy-datum.         "last_day
append y_s_mnth.
clear y_s_mnth.
Regards,
Sagar

Query to find first and last call made by selected number for date range

Hi,
query to find first and last call made by selected number for date range
according to filter:
mobile_no : 989.....
call_date_from : 25-april-2013
call_date_to : 26-april-2013
Please help

Hi,
It sounds like you want a Top-N Query , something like this:
WITH    got_nums   AS
     SELECT     table_x.*     -- or list columns wanted
     ,     ROW_NUMBER () OVER (ORDER BY call_date      ) AS a_num
     ,     ROW_NUMBER () OVER (ORDER BY call_date DESC) AS d_num
     FROM     table_x
     WHERE     mobile_no     = 989
     AND     call_date     >= DATE '2013-04-25'
     AND     call_date     < DATE '2013-04-26' + 1
SELECT *     -- or list all columns except a_num and d_num
FROM     got_nums
WHERE     1     IN (a_num, d_num)
;This forum is devoted to the SQL*Plus and iSQL*Plus front ends. This question doesn't have anything to do with any front end, does it? In the future, you'll get better response if you post questions like this in the PL/SQL.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only), and also post the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the SQL forum FAQ {message:id=9360002}

Data load using 0HR_PA_OS_1 data source

Hi,
I am trying to load data (Full Load) using 0HR_PA_OS_1 (Staffing Assignments) data source, But it is extracting 0 records.
I checked in RSA3 (R/3) it is stilling showing 0 recordsbut there is significant amount of data already present in BW Cube (50000 Records)
Do I need to perform any pre requisites to perform data load using 0HR_PA_OS_1
Thanks

Refered SAP Note 429145

Sample SOAP request for Data Loader API

Hi
Can anyone please help me out in giving a sample SOAP request for Data Loader API .This is to say import 1K records from my system to the CRM instance I have .

Log into the application and then click on Training and Support there is a WS Library of Information within the application

Standalone application for data acquisition using NI DAQ card

I have made a standalone application in labview GUI for data acquisition and signal processing. if i have to run this application in any other computer what all softwares should be installed other than labview runtime engine...NI DEVICE DRIVER CD alone is to be installed or do i have to install any other software for data acquisition using NI daq card??
thanks and regards
Solved!
Go to Solution.

You should only need the run time engine, The device drivers for the device, maybe need VISA drivers if you are doing serial or something of that nature, You may need the channels or tasks created in NI measurements and automation if you created them there.
There may be other things that you will need depending on what you include in your code and what tool kits that you have installed.
Tim
Johnson Controls
Holland Michigan

Data load uses wrong character set, where to correct? APEX bug/omission?

Hi,
I created a set of Data Load pages in my application, so the users can upload a CSV file.
But unlike the Load spreadsheet data (under SQL Workshop\Utilities\Data Workshop), where you can set the 'File Character Set', I didn't see where to set the Character set for Data Load pages in my application.
Now there is a character set mismatch, "m³/h" and "°C" become "m�/h" and "�C"
Where to set?
Seems like an APEX bug or at least omission, IMHO the Data Load page should ask for the character set, as clients with different character sets could be uploading CSV.
Apex 4.1 (testing on the apex.oracle.com website)

Hello JP,
Please give us some more details about your database version and its character set, and the character set of the CSV file.
>> …But unlike the Load spreadsheet data (under SQL Workshop\Utilities\Data Workshop), where you can set the 'File Character Set', I didn't see where to set the Character set for Data Load pages in my application.
It seems that you are right. I was not able to find any reference to the (expected/default) character set of the uploaded file in the current APEX documentation.
>> If it's an APEX omission, where could I report that?
Usually, an entry on this forum is enough as some of the development team members are frequent participants. Just to be sure, I’ll draw the attention of one of them to the thread.
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Author of Oracle Application Express 3.2 – The Essentials and More

"Error for COM routine using application program (return code 40,020)"

Dear All,
Working on 4.1
We are getting the below error while loading the Data into planning book...
"Time Series has to be updated"
After this we updated the storage bucket profile and the fiscal year varient calender.
And after this we are trying to initialize the planning area..but getting the below error...
"Error for COM routine using application program (return code 40,020)"
So then we try to run the LCM CON check , but here also we are getting the below log...
"Inconsistent time series initialization horizons"
We teasted all the above in TEST system , but we are not facing any issue.
Plz plz help us to resolve the same.
Regards,
Rajesh Patil

Hello Rajesh,
COM error 40,020 generally indicates that no Time Series exists for
the characteristic combination that is being loaded or saved.
In certain cases it could be related to missing Time Series for aggregates.
Therefore, performing a consistency check for the relevant planning area by running the program
/SAPAPO/TS_LCM_CONS_CHECK is usually the first option. You could also check the relevant planning
object structure and any aggregates using the programs /SAPAPO/TS_PSTRU_TOOL and /SAPAPO/TS_PSTRU_CONS_CHECK.
Additionally, please make sure that the time series exists for the horizon for which data is to be loaded. Should all these not resolve the issue, the problem will be resolved by deinitializing & reinitializing the time series.
Please note that deinitializing of the the planning area will lead to data loss, so please take the backup of your data before you
deinitialize the planning area.
Hope this helps.
Regards,
Ade

Error for COM routine using application program (return code 40.301)

Hi All,
We are loading data in the DP book interactviely and then trying to Execute the Update Quantity button. The error message given is "Error for COM routine using application program (return code 40.301)".
We are on APO 5.0 and have the highest Support Pack of SAPKY50011.
I have searched in the SAP notes and one note 1050350 talks about a similar issue however the corrections mentioned are already there in our system and there the desired SP is SAPKY50010.
Can anyone tell what could be the reason for such error and how to resolve the same.
Thanks
Harsh

Hi Senthil / Vijaya,
Thanks for your prompt response.
Well first responding to Senthil
- Issue is not reproducable in Dev or Q systems.
- How to check the application logs during the time of errors
- Yes I have checked system locks they are clear
- We have run OM 17 and TS consistency checks but still the error persists.
I will go through the notes refered by you and see if it is of help.
Vijaya
- Yes you are Correct that for the related keyfigures the tick "No Negative stocks is there" also the tick for Fixed Values is also there. But the concern is that it was running fine earlier with the same settings.
To give you more inputs perhaps this is being run with the Sales Order History and the key figure which is in consideration is a Sales Override.If it is the negative values that are causing the problem they how can we avoid that figures?
Looking forward from hearing from you guys
Thanks,
Harsh

Extraction problem - selection conditions for data load using abap program

Similar Messages

Maybe you are looking for