F4 for custom field in database table

Hello,
I created a Z-table with a Z-domain attached to a field.
The domain has only 2 values (Yes and No).
In the selection-screen of the table, I have an F4 for that field, however, I also want an F4 in the table itself (to know that Y = yes and N = no)
How can you do this?
Thanks

Hi,
at the Domain side assign the value range yes and no in the fixed values..
so when ever you use the f4 help refer the data element..
automatically when ever you press F4 it show the Fixed values in domain..
Regards,Prabhu

Similar Messages

FI substitutions for custom fields in BKPF table

Hi,
We are having trouble making the substitution work for the custom header fields in table BKPF.
We have tried straight substitutions, exits and populating the fields on the interface table ACCHD.
Nothing works. But the substitution for the custom fields in BSEG works.
We did activated these substitution rules.
Do we need to have blank instead of "X" in the GB01 table for the field BEXCLUDE ?
Did we miss any thing here or we cannot use substitutions for header custom fields ?
Thanks
Steve

Hi Dave,
Currently, In BKPF table we have entries as follows:
For BOOCLASS "008" we have BEXCLUDE as blank
where as for "015" we have BEXCLUDE as "X" .
Do we need to change this "X" to blank as well ? Also I do not see the custom fields in GB01 table, but I see them in BKPF table though.
We have already regenerated the rules by running RGUGBR00 program.
Thanks
Steve

Delete L.H.S spaces from field in database table but not for Report

Dear Experts
I m facing a problem...actaually i have replaced 999 by blank in a field of database table record.
Like :     999 abcde
             999999 hjklmn
             9999 klplmj
             99999 hjsfhh
I have replaced 9 by blank. and using CONDENSE statement i have avoid the left hand side spaces of 9 in the database table.
Means the data is updated in database table following below using Condense.
Like:     abcde
            hjklmn
            klplmj
            hjsfhh
Now, the problem is that these spaces is showing in the Report. The left hand side spaces is not deleting from the Report. But these spaces is not showing in the databse table.
Plz tell me wat is the reason and wat is the solution to avoid these space from the Report.
Note: That field is Character Field.   KNA1-STRAS
Thanks and Regards,
Swapnika

Hello
Try to use
SHIFT c LEFT DELETING LEADING SPACE.
instead of
CONDENSE...

Add a custom-field in the table MARC and manage it in MM01/MM02/MM03

Good day to all of you!
I have this task: To add a custom-field to the table MARC. This custom-field will be managed through the MM01/MM02/MM03 transaction as follows:
In the Basic Data 1 or Basic Data 2 the custom-field data will be added. Let's say the field is MATNR OBSOLETE.
I have searched and implemented the things in customizing: Made a copy of function group MGD1, added the field on the screen.
MY PROBLEM! How to manage it??? When the user enters MM01/MM02/MM03 and update this field, the field should be updated in MARC.
1. I am not sure that this custom-field should be on Basic Data1 or Basic Data2.They want it at plant level.
2. How to manage the data transfer from SAP Standard Program and my Custom Function Group.
PLs: Do not paste me link to sap technical site with that example, because there takes the custom fields and UPDATE a CUSTOM TABLE. I need to update MARC!
All the documentations i have read until now tell you how to add the field, ONLY the first part of the SOLUTION.
Any help, pls?
Good day and thank you!

Hi Alex,
In which way you are trying to update that custom filed. Have you written any logic in EXITS/BADIS?
http://pavelgk.pbworks.com/f/6729224-Implement-Screen-Exit-for-MM01-Adding-New-Fields-in-Screen.pdf
and
Just read the OSS note mentioned earlier.
Symptom
You want to integrate customer-specific fields in material master maintenance.
Other terms
SAPLMGMM, RMDATIND, ALE, CI_MMH1, EXIT_SAPLMGMU_001
Solution
To add customer-specific fields to an existing material master table (such as MARA or MARC) , you can proceed as follows as of Release 3.0C:
      1. Use an append structure to add the fields to the required table in the Dictionary (this is not a modification; for details, see the SAP document "ABAP/4 Dictionary"). In Release 3.x, the length of the field names must be the same as the standard five character fields. This is necessary because of dynamic assignments. As of Release 4.0A, the lengths of the field names can be longer than five characters. If the changes of the fields should be recorded in the change document and taken into account during ALE distribution, set the 'Change document-relevant' indicator for the corresponding data elements. For table MARA in Release 3.x, you must also enhance the database view MARU because the database changes are carried out using this view. This small modification is no longer necessary as of Release 4.0A because the database view MARU is enhanced automatically when you enhance table MARA or the include EMARA (which is the data part of table MARA).
      2. Enhancing online maintenance in customized material master maintenance:
      Define a subscreen with your customer-specific fields in a customer-specific function group created as a copy of the standard function group MGD1.
      In Customizing, assign this subscreen to a maintenance screen using the "Copy customized material master" function. For details, see the Implementation Guide (IMG). As of Release 4.0A, program COPYMGD1 is available. You can use this program to create customer-specific function groups as required. This program is also incorporated in the Customizing function 'Configure customized material master'. Ensure that each field of the subscreen has a field statement in the flow logic, otherwise the data is not transported correctly. You can use subscreen SAPLMGD1 2002 as an example.
      If you want these fields to be subject to standard field selection, you must add new entries for them to the central field table for material master maintenance (T130F):
      Application examples for standard field selection:
      The field is mandatory and is to be flagged with a "?".
      The field belongs exclusively to the purchasing user department. Purchasing data and MRP data are both contained on one screen. However, the MRP controller is not to see the purchasing data.
      The following data is required for each field:
            a) Field name        (T130F-FNAME)
            b) Field selection group (T130F-FGRUP)
            Here, you should use a standard field group if the customer field is subject to the same field selection as the standard fields of the standard field group. If it is not, use a customer-specific field group.
            You must then check and, if necessary, modify the attribute of the field group using the function "Maintain field selection for data screens" in Customizing under "Logistics Basic Data -> Material Master".
            Field groups 111 through 120 that are not used in the standard system are reserved as customer-specific field groups. As of Release 3.0F, additional customer field groups are available. (For details, see the IMG).
            c) Maintenance status (T130F-PSTAT)
            List of the user departments that may maintain the field. You can display possible values by using the input help for the maintenance status field in the Customizing activity "Configure Material Master" when maintaining logical screens.
            d) Reference        (T130F-KZREF)
            This indicator must be set if the field from the reference material should be proposed during creation with reference.
Note: You cannot yet use Customizing to enhance table T130F; you can use only transaction SE16 (Data Browser) or transaction SM31. Future releases will include a separate Customizing function for maintaining customer-specific fields. See Note 306966. By implementing this note you can add entries to table T130F within Customizing. This type of maintenance is possible as of Release 4.5B.
You may change the entries for standard fields only with regard to the reference data and field selection group. Changing other data for standard fields constitutes a modification. Therefore, you cannot use the Customizing function "Assign Fields to Field Groups" to change this data.
In addition, you must not add new standard fields to table T130F.
      3. If you want to maintain customer-specific fields using data transfer by direct input or via ALE distribution, proceed as follows:
      Add the fields to central field table T130F (see above).
      Add the customer-specific fields to the data structures for the data transfer (for example, BMMH1 for the main data).
      Also, add the customer-specific fields to the tables in which the incorrect data is stored during direct input. These tables have the same name as the corresponding master data table and also have the suffix _TMP.
      For example: If you add customer-specific fields to table MARA, you should add the same fields to table MARA_TMP.
      If you use ALE, you must also add fields to the IDoc. To process enhanced IDocs, you can use enhancement MGV00001 with customer exit EXIT_SAPLMV01_002 for creating the IDocs and customer exit EXIT_SAPLMV02_002 for posting the IDocs.
      Prior to Release 3.0E, enhancing structure BMMH1 constitutes a modification. In this case, you must add the new fields tot the end of the structure before the last field (SENDE = record end indicator).
      As of Release 3.0F, structure BMMH1 contains the customer include CI_MMH1, which is part of the enhancement MGA0001. Here, you must proceed as follows:
            a) Add the customer-specific fields to include CI_MMH1.
            The names of the fields in CI_MMH1 must be identical to those of the corresponding fields in material master tables MARA, MARC and so on.
            Important: The fields must be CHAR type fields. Therefore, create CHAR type data elements whose lengths are identical to the output length of your fields in table MARA and so on. Use these data elements in include CI_MMH1, but use the field names from table MARA and so on.
            b) Activate include CI_MMH1.
            c) If you have not used customer structure ZMMH1 before, create it as a copy of structure BMMH1 and delete the standard fields that you do not require. You are not permitted to delete field STYPE and include CI_MMH1 when doing this. If you have already used structure ZMMH1, add include CI_MMH1 to it.
            d) Activate structure ZMMH1. This also adds the customer-specific fields to ZMMH1.
Run program RMDATING. This program generates routines which are supplied to your customer-specific fields from the input file. As of Release 4.5A, you also need to activate the routines/function modules generated by program RMDATING (especially, the MAT_MOVE_BMMH1_XXXX modules). Details about this subject (especially the procedure when using customer structure ZMMH1) are described in the IMG for transferring the material data under item 'Maintain Transfer Structure'. Also, check the declaration of structure WA in program RMMMBIMC to see whether it is declared with sufficient length. If necessary, enhance the declaration (for the time being, this still constitutes a minor modification).
In addition, lengthen domain DI_DATA with CHAR 5000. As of Release 3.1H, this has already been done.
Important: When using customer-specific fields, you can use only structure ZMMH1 to transfer the data. Otherwise, after the next SAP upgrade which contains new standard fields in structure BMMH1, the input files no longer match. If you want these new standard fields to be transferred, add them after your customer-specific fields (the order of the fields in structure ZMMH1 does not need to be the same as the order of the fields in BMMH1).
If you want foreign key dependencies or fixed domain values to be checked, or another check for a customer field, this is possible up to and including Release 3.0D only by modifying the corresponding check function modules. As of Release 3.0E, you can use function exit EXIT_SAPLMGMU_001 (SAP enhancement MGA00001) for these purposes.
If you want to use engineering change management to schedule future changes for your customer-specific fields or you want to use the 'Display at Key Date' function, execute program GENERATE in addition. This program generates the necessary assignments for interpreting the change documents. With regard to engineering change management, you must read Notes 60281, 60973, and 48962.
To date, it is not possible to integrate customer-specific tables in material master maintenance without making a modification. However, you can create customer-specific development objects containing the essential additional logic. You can then integrate these development objects in your system as part of only a minor modification.
check this link. It may helps you to solve your issue.
Thanks
Sravan

Reg : F4 help for custom fields in ALV report

hi friends..
in my internal table i have fields including 1 custom field..
DATA : BEGIN OF i_final OCCURS 0,
pernr LIKE p0000-pernr,
begda LIKE p0000-begda,
plans LIKE ZPOSITION-plans, (custom)
werks LIKE pspar-werks,
end of i_final.
i want to display this i_final table in alv. for that i genetrate one fieldcatalog
PERFORM fcat USING:
 'I_FINAL' 'PERNR' 'P0000' 'PERNR' '15' 'X' '',
 'I_FINAL' 'BEGDA' 'P0000' 'BEGDA' '10' 'X' '',
 'I_FINAL' 'PLANS' 'ZPOSITION' 'PLANS' '8' 'X' '',
 'I_FINAL' 'WERKS' 'PSPAR' 'WERKS' '14' 'X' ''.
in custom table zposition, i maintain serch help for custom field "PLANS".
then i used reuse_alv_grid_display.. for all the std fields along wit custom fields
i got f4 all std fields but for my custom i am not getting the f4 help
how can i get the F$ help for this custom fields Zposition-plans..
plz give some idea

Hi
In that Ztable against the field
PLANS give the check table name as T528B
then it will automatically give the search help
or you can create your own search help(elementary) and add to that field
Reward if useful
regards
Anji

To Update Custom field in mch1 table through MIGO Tcode

Dear champs,
I have added one custom field in mch1 table ( date ).
Now , In MIGO Tcode when i am doing posting, MCH1 table is also updated.
I want to know how to update my custom field in mch1 table at the time of posting.
Please tell me where to write logic to update mch1 table.
Regards,
Satyen Trivedi

Hi Satyen,
what data has to be update in MCH1 table new field, for this did you added any screen or you want to implement your own custom logic.
1) if you implemented the screen , then you have to write logic there itself.
2) If you want to update through custom logic , then you takeup with the Enhancements or BADI.
Regards,
Krishna

Custom field in BP_PDBGP table not getting updated

Hi,
i am working in Contract management in SRM 7.0 Pack 6. I have aadded a custom field in partner table which appears in the partner table of contract header. It is a checkbox. when i check it the value gets saved in BBPPDBGP table for the first time after that if i try to uncheck it the value is not getting updated. I checked in the BBP_DOC_CHANGE_BADI, the value which is getting passed is correct but it doesn't update the databse accordingly.
Any suggestions? is this a standard bug?
Neha

Hi Virendra,
Thanks a lot for your suggestion.
Where should i check? If the data passing to BBP_DOC_CHANGE_BADI is correct then that means at the webdynpro side there should not be any problem and as per the standard after doc_change also it should save properly. i also checked the badi there is not dependent coding done over there. DOC_SAVE badi is also inactive for contract business object. Hence, i am not getting any clue where could be the problem.
Let me know if you want more details inorder to analyse this problem.
Thanks &Regards,
Neha

How to add a value table to a field in database table?

Dear Experts,
Normally a value table can be added in the domain.
And the field of the database table will have the value table, to which this domain is assigned.
My question is.. Is it possible to assign a value table to any field ina database table, directly?(i.e. without assigning to that domain)
If yes.. please let me know the step-by-step procedure clearly.
Thanks to U in advance.

Hi sr,
1. what is the purpose of your value table ?
-- so that the user can select values
 from some master table , for that field !!!!
2. This is done by
 CHECK TABLE (foreign key concept)
 (and not value table)
3. When we create a check table for a field,
 then
 some DEFAULT table is PROPOSED
 . that DEFAULT table is nothing
but PICKED up from the domain of that field,
and shown from the value of VALUE TABLE.
(we can change it however)
4. so for your purpose,
 just create a CHECK TABLE.
regards,
amit m.

Moving data from custom fields to ekko table

Hi Experts,
I added new custom tab into me21n,me22n,me23n header thro me_gui_po_cust and me_process_po_cust.
If i enter values in my custom fields, transport_from_model this method is not triggering.i have written below code in this method.
METHOD if_ex_me_gui_po_cust~transport_from_model.
DATA:     l_header TYPE REF TO if_purchase_order_mm,
            ls_mepoheader TYPE mepoheader,
            ls_customer TYPE ci_ekkodb.
CASE im_name.
    WHEN subscreen.
      mmpur_dynamic_cast l_header im_model.
      CHECK NOT l_header IS INITIAL.
      ls_mepoheader = l_header->get_data( ).
      CALL FUNCTION 'ZMM_GET_DATA'
        EXPORTING
          im_ebeln       = ls_mepoheader-ebeln
*            im_ebelp       = ls_mepoheader-ebelp
       IMPORTING
         ex_data        = ls_customer .
      MOVE-CORRESPONDING ls_mepoheader TO dynp_data_pbo.
      MOVE ls_customer-ztender TO dynp_data_pbo-ztender.
      MOVE ls_customer-zemdapplicable TO dynp_data_pbo-zemdapplicable.
      MOVE ls_customer-zpbgapplicable TO dynp_data_pbo-zpbgapplicable.
      MOVE ls_customer-zemdamount TO dynp_data_pbo-zemdamount.
      MOVE ls_customer-zemdvalidity TO dynp_data_pbo-zemdvalidity.
    WHEN OTHERS.
ENDCASE.
ENDMETHOD.
i cant move my values entered in custom fields to ekko table.
please help if u know..
regards,
Kavitha
Edited by: Matt on Mar 23, 2011 10:55 AM added tags

Hi,
check this out.. !!
Import data from Excel to Oracle Database and
Added link From Ask Tom.. your requirement you would be satisfied.. I supppose.. !!
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:908428873069
- Pavan Kumar N

Regarding adding a Custom field to Standard Table

Hi ABAPers,
Can any one explain the below spec-description.
"The purpose of this design is to provide the foundation for a more automated solution to the invoice reconciliation process. This design calls for adding a custom field to the standard SAP table EINE as well as a data maintenance tool for the same. There will also be a new custom table for storing values associated with the new EINE field. These new tables will also provide users with the ability to determine which PIR are soon to expire."
We have to add one custom field to standard table EINE, how we can add this custom field to STND table.
According to me we can add it through append structure. is it correct or not.
and what is data maintenance tool.
Pls.............Explain in details.
Thanks in advance.
Regards,
Ramana Prasad. T

Hi,
Goto SE11 ,give ur table name.Then press display button.Then in the application tool bar press on append structure ...Now create a zstructure and add ur custom field and then activate the table.
Regards,
nagaraj

Custom fields in migo table control not updating

hi ,
This is to have your valuable suggestion , wrt , following issue..
In transaction MIGO , i have to add two fields uebto and untto in table control .
I am able to add them in table control, but some how not able to pick data for these fields .
error coming is :
" System error: Incorrect Customizing for field
ZZUEBTO".
if any face such type of issue , answer me .
Thanx,
jeet

Hi,
Thanks for your reply. I have added the custom fields in the item detail. But the customer wants the custom fields in the table view also.
Is there any screen exit available to modify the table control of MIGO?
Thanks.

Change Log for Custom fields

Hi All,
I need the change log for custom fields added in BP transaction codes.
Basically, for tracking the changes of master data in CDHDR and CDPOS tables we will enable the checkbox of dataelement related to custom field.
As for SAP fields in BP transaction code the change history is reflecting in CDHDR/CDPOS tables. i have enabled that for custom fields added to BP transaction code but i could not see the change history for such fields.
Please let us know if iam missing any other thing?

Hi Amit Singh,
Apart from clicking the checkbox in dataelement...
There are some settings need to be done by BASIS
and some settings and entries should be made in SCOD t-code
create entriy for change document here..
also hv a look on below links...
http://help.sap.com/saphelp_nw2004s/helpdata/en/2a/fa015b493111d182b70000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/db/7a2a40ce93185de10000000a1550b0/content.htm
Custom Table values in CDPOS and CDHDR
scdo
wat do these fields in scdo stand for?
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7

Add time field in database table

Hi Gurus,
I am trying to add a time field in database table. I know i can add it by using append structure.
but my problem is when records r creating in database table, the time field also populate with respective system time automatically. i think i need to use events but i have no idea how to use.
is there any other method available?
is there any system field for time stamp as date + time?
Regards
Giri

Rob,
its not updating by table maintainance generator.
I want to add Time field in table ESTDH.
when a new record updated while report version generated the time field also populate with system field.
is it possible?
can anybody help me?
Regards
Giri

Add columns with custom fields in the table control of MIGO

Hi,
I have to add custom fields in the table control view of item in the MIGO. I have added the fields in the GOITEM structure and i am able to display it in the item details tab. I want the same fields to be visible as columns in the table control view of the items.
I found that TV_GOITEM is the control in SAPLMIGO program referring to the table control of items but it is referring only to the standard fields available in Screen 200.
Please let me know if there is any screen exit or option to add the custom fields in the control TV_GOITEM.
Thanks.

Hi,
Thanks for your reply. I have added the custom fields in the item detail. But the customer wants the custom fields in the table view also.
Is there any screen exit available to modify the table control of MIGO?
Thanks.

Master Datasource Update for custom fields

I have a standard master data source for 0customer, I need some custom fields that are enhanced in the same SoURCE TABLE KNA1. please let me know if
1. i can create the generic data source Z_DS_CUSTOMER for custom fields only from KNA1
2. Create transformation 1 to Map the data source Z_DS_CUSTOMER to Ocustomer to load the custom fields only and set no transformation for other standard fields
3. Create transformation 2 to Map the data source 0customer_attr to same Ocustomer to load the standard fields.set no transformation for other custom fields
4. Then Load via DTP Standard fields first via transformation 2
5. Then Load via DTP custom fields first via transformation 1
Will the above will work fine, and I can avoid any enhancement to master datasource 0customer_attr
please help me with solution.
Regards
Soniya
null

Hi all my dear friends,
I have seen the recommendation by my SAP collegue and Anil
1. infoobject as Target and
2. in between Standard DSO
1 transformations as you mentioned from 1 IS
3. Common Info source
2 transformations as you mentioned from 2DS
4. Datasources (2no's ) as source to splly to data to DSO
Please tell me what is the need to do all the above why can't I feed directly the Infoobject with the below PLEASE tell me what will be the bad impact on design if I do the below.since my client is asking justification for build of each BI object
1. infoobject as Target and
1 transformations as mentioned from 1 IS
2. Common Info source
2 transformations as mentioned from 2DS
3. Datasources (2no's ) as source to splly to data to DSO
I am not going for enhancement since it is not populating the datasource in rsa3. if you can correct that it would be great.
I have the same code for all custom fields none of them is working no records are pulled in RSA3 For custom field ZZSTAT.
Please help me with this
Thanks
Soniya Kapoor
*data: l_BIW_KNA1_S like BIW_KNA1_S
*case i_datasource.
*WHEN ' 0CUSTOMER_ATTR'.
*loop at C_t_data into l_BIW_KNA1_S
*l_tabix = sy-tabix.
*clear I_KNA1.
*select single * from KNA1 into i_KNA1 where kunnr = l_BIW_KNA1_S-kunnr.
*if sy-subrc = 0.
*l_BIW_KNA1-ZZSTAT = I_KNA1-ZINSTAT.
*modify C_t_data from l_BIW_KNA1 index l_tabix.
*endif.
*endloop.
*endcase.

F4 for custom field in database table

Similar Messages

Maybe you are looking for