F4 help for the batch field in VL02N transaction

We have upgraded our system from 4.6 to ecc 6.0 .In 4.6 the f4 help for the batch had " Batch selection via plant/Material/Storage location/Batch " which is not there in ECC 6.0.
Please tell us the procedure to add in the existing search help H_MCHA in ECC 6.0
Thanks
Aruna

Hi Aruna.
Create ur own search help using se11 tcode for required fields.
Thanks & Regards,
Kiran.
Plz give rewards if and only if it is helpfull.

Similar Messages

F4 help for the screen fields in module pool program

Hi All,
I have a requirement that, i want to provide F4 help for the 2 fields in module pool program. the fields are document number and fiscal year from rbkp table.
i could provide search help for two fields.
but how to select matching fiscal year for that document number.
problem: i am getting fiscal year as first four digits of document number.
please help me to solve this problem.
Thanks & Regards,
Namratha.V

Hi,
If your requirement is after selecting the document no from f4 help then the corresponding year should be updated in the document year field then use FM --> DYNP_VALUES_UPDATE
In this function module pass the screen no program & field for which u want to update value

Providing F4 help for the same field on selection screen

Hello Experts,
My requirement is :
There are 2 radio buttons and a parameter "p_file" on my selection scree.
1. rb_appl
2. rb_pres
If the radio button rb_appl = 'X', I need to place the logic of F4 help of application server for the field p_file. Else if the rb_pres = 'X', then I need to place the logic of F4 help of presentation server for the same field p_file.
I have written the code in the below manner
PARAMETERS: rb_appl RADIOBUTTON GROUP rad DEFAULT 'X',
                         rb_pres RADIOBUTTON GROUP rad ,
                         p_file   TYPE ibipparms-path.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
IF rb_appl = 'X'.
      PERFORM f_applictn_server_filenm.
ELSEIF rb_pres = 'X'.
    PERFORM f_presentation_filenm.
ENDIF.
But I am getting the F4 help for only the radio button for which i have placed the default value in the parameters.
So please let me know how to define the F4 help for the same field based on the radio buttons.

Hi,
You can acheive the same by the addition of [USER-COMMAND fcode].
RADIOBUTTON GROUP group [USER-COMMAND fcode] - The addition USER-COMMAND can be used to assign a function code fcode to the first parameter in a radio button group. The function code fcode must be specified directly, and have a maximum length of 20 characters. When the user selects any radio button of the radio button group on the selection screen, the runtime environment triggers the event AT SELECTION-SCREEN and transfers the function code fcode to the component ucomm of the interface work area sscrfields.
So you code should be altered as
PARAMETERS: rb_appl RADIOBUTTON GROUP rad
                     USER-COMMAND radclick    "Addition which you have to make.
                     DEFAULT 'X',
            rb_pres RADIOBUTTON GROUP rad ,
            p_file   TYPE ibipparms-path.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
IF rb_appl = 'X'.
    PERFORM f_applictn_server_filenm.
ELSEIF rb_pres = 'X'.
    PERFORM f_presentation_filenm.
ENDIF.
Thanks & Regards,
Harish

F4 help for PO date field in VA01 transaction during upgrade

Hi All,
We are working on upgrade project 4.6c to ECC 6.
We came across one scenario.
F4 help for PO date field is not coming in newer version in VA01 transaction but i checked in older version it is coming F4 help for PO date(calender).
May i know the reason regarding this.
Any clues
Regards
Jai
Edited by: Jayanth16 on Nov 12, 2009 6:14 PM
Edited by: Jayanth16 on Nov 12, 2009 6:22 PM

Hi,
User did some changes in include LSDSDF05 due to that F4 help is not coming.
So i correct that one.
Regards
Jai

How to add F4 help for the custom field of a custom table

Hi All,
How to add F4 help to the custom table field? in the table maintainance when user clicks on F4 i want to provide possible values for this field I am trying to write the code in the screen of table maintainace like the following
PROCESS ON VALUE-REQUEST.
FIELD ZTEST_MAH_F4-KUNNR MODULE zVALUE_kunnr .
But when i am double clicking on module it's giving options to create include program but after that it's giving user is currently editing the table i am not getting this can some body clarify my doubt it's gr8 if some body give some examp code
Thanks&Regards
mahesh

Hi,
Create a subroutine under the event and call the following FM
1. Select all the related data into an itab, for ex i_kunnr
2.    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
    DDIC_STRUCTURE         = ' '
       retfield               = 'KUNNR'
    PVALKEY                = ' '
       dynpprog               = sy-repid
       dynpnr                 = '1000'
       dynprofield            = <selection screen field>
    STEPL                  = 0
    WINDOW_TITLE           =
    VALUE                  = ' '
       value_org              = 'S'
    MULTIPLE_CHOICE        = ' '
    DISPLAY                = ' '
    CALLBACK_PROGRAM       = ' '
    CALLBACK_FORM          = ' '
    MARK_TAB               =
IMPORTING
    USER_RESET             =
      TABLES
       value_tab              = <b>i_kunnr</b>
    FIELD_TAB              =
       return_tab             = < return table >
    DYNPFLD_MAPPING        =
     EXCEPTIONS
       parameter_error        = 1
       no_values_found        = 2
       OTHERS                 = 3

F4 Help For the Custom Fields

Hi Experts
I have added few custom fields in custom includes (INCL_EEW* )
Those fields are like (LAND1, BLAND) from the T005S.
I have used the same Data element for these fields.
But I didnu2019t get any F4 help for these fields in the screen?
These fields having the Value table for these elements?
Do I need to do anything, to get the F4 help for these fields?
Can anybody suggest me?
Thank you,
Bharathi

Hi Baarti,
Go through the following links,
F4 help and drop down menu to Customer fields in Manage business partner
Supplier Relationship Management (SAP SRM)
Re: F4 for customer table fields
Hope this helps.
Thanks,
Pradeep

How to prvide f4 help for the particular field in table control

hi all,
my requirement is iam having one i/p field in screen 100.name of the field is sales order number. i just want to keep f4 help for this field only.when i click F4 on this field it has to show all the sales order numbers from vbak table.
anybody can send me the code please.
thanks,
maheedhar.t

Hi,
In POV Modlue u write
Filed (ur field name ) module get_values.
In that get_values module u declare an itab according to ur requirement and get the values into internal table using select query .After u get the values in select query u call a function popup_with_table_display in which u pass the itab along with the starting and postion , width and height of the popup window .Hope this will help u
Regards,
Shafi

F4 help for the Date field in Module-Pool program

Hi,
I have a requirement wherein the user shud be allowed to choose a date on the calendar using F4 help and after choosing, it shud get displayed as dd.mm.yyyy format in the field. Is there any functional module to implement this.
Thanks in Advance,
Saranya.

Hi,
Please try the below code in your prgm.
You have to write the below code in the POV of the required field.
***INCLUDE MZDATE_POV_DATEI01 .
*&      Module pov_date INPUT
      text
module pov_date input.
DATA: li_ret_tab LIKE ddshretval OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
tabname = ' '
fieldname = ' '
searchhelp = 'BU_DATE_CHAR'
TABLES
return_tab = li_ret_tab
EXCEPTIONS
field_not_found = 1
no_help_for_field = 2
inconsistent_help = 3
no_values_found = 4
OTHERS = 5.
IF sy-subrc IS INITIAL.
READ TABLE li_ret_tab INDEX 1.
IF sy-subrc IS INITIAL.
wrk_date = li_ret_tab-fieldval. "The required field
ENDIF.
ENDIF.
endmodule.                 " pov_date INPUT
Hope it suits ur requirement.
Reward points if useful.
Thanks and regards,
Litta.

IW31- How to add Search help for User specific fields in IW31 transaction.

Hi Experts,
I have to add Search help for standard fields USR00 to USR10 fields in IW31 transaction.
Is there any user exit for this requirement.
Please reply, it will be very helpful for me.
Regards,
B. V. Rao

Bala,
See the following user-exits:
IWO10015: F4 Help for user fields on operation
IWO10016: Customer enhancement to check operation user fields
PeteA
[www.pjas.com]

Need help for the infotype 15 in PA30 transaction

Hi,
My requirement is :
In infotype 0015 when ever i change the amount i need old amount and new amount respectively.
I am getting new amount by using below logic.
"-- Get changed record
        CALL METHOD CL_HR_PNNNN_TYPE_CAST=>PRELP_TO_PNNNN
          EXPORTING
            PRELP = INNNN
          IMPORTING
            PNNNN = I0015.
anybody can tell me how to get old amount.
Thanks,
Maheedhar

Hi, Tadakamadla
You can do the following way i think.
For Example
date = begda -1 . " Begda of Current Record
now select following way.
Select single * from pa0015
where pernr = pernr
and endda = date.
Hope will help you..
Please Reply if any Issue,
Regards,
Faisal

SRM Portal - Search help for a custom field

Hi,
I have added a custom field to the SRM Portal (5.0) shopping cart, by adding the field to structures INCL_EEW_PD_ITEM_CSF INCL_EEW_PD_ITEM_CSF_SC.
However, I need to filter the search help for that custom field, based on values & relationships stored in a Z table.
Is this possible? How? Please help.
Thank You.

Currently, my idea would be to create a search help for the custom field & filter the values in a search help exit. However, would I be able to get other field values (standard) from SRM into my search help exit?

BSP: F4 Help For a custom field...

Hi All,
I need to display search help for a custom field in one of my custom view.
Search Help for the custom field is already implemented.. but how can i use it in BSP View!.
In the standard CRM_IC application i couldn't find any similar search help scenario, coz it is calling some standard methods like ShowF4KeyAndValueHelp3,
ICWCShowF4HelpExtern by passing the structure and field name!.
I think these standard methods will work only with the fields which have value help table at the data element level. As the custom field that i m using does not have any value help i cant go for this method i guess!.
Any Help/Hint?..
Thank You,
sudeep v d.

Hello Sudeep,
Here are some more helpful links .Please refer them .
Re: Inputfield value for a tableView from a help window
/people/thomas.jung3/blog/2005/08/22/bsp-value-input-help-popups-version-30
F4 help using javascript
Please let me know the feedback.
Warm Regards,
Rakesh Kumar Verma

F4 HELP for the field

HI all,
in the report selection screen i have one field for which F4 HELP doesnt exits, even in the table for that field F4 HELP is not there but the user requests me to get the F4 HELP for that field in the selection screen .
please help how to get F4 HELP for the field
thanks in advance.

The following are the options for F4 help
Code:
PARAMETERS: p_ccgrp LIKE rkpln-ksgru. "Cost Center Group
*Input help for Cost Center Group
AT SELECTION-SCREEN ON VALUE-REQUEST   FOR p_ccgrp.
TYPES: BEGIN OF ty_ccenter_group,
setname TYPE setnamenew,
descript TYPE settext,
END OF ty_ccenter_group.
DATA: it_ccenter_group TYPE TABLE OF ty_ccenter_group.
CLEAR it_ccenter_group.
SELECT a~setname
b~descript
INTO TABLE it_ccenter_group
FROM setheader AS a INNER JOIN
setheadert AS b ON
asubclass EQ bsubclass AND
asetname EQ bsetname
WHERE a~setclass EQ '0101' AND
b~langu EQ sy-langu.
CALL FUNCTION
'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
ret field        = 'SETNAME'
dynpprog     = v_repid
dynpnr         =    SY-DYNR
dynprofield = 'P_CCGRP'
value_org    = 'S'
TABLES
value_tab   = it_ccenter_group.
F4IF_FIELD_VALUE_REQUEST:
This FM is used to display value help or input from ABAP dictionary. We have to pass the name of the structure or table (TABNAME) along with the field name (FIELDNAME). The selection can be returned to the specified screen field if three
parameters DYNPNR, DYNPPROG, DYNPROFIELD are also specified or to a table if RETRN_TAB is specified.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
TABNAME = table/structure
FIELDNAME = 'field name'
DYNPPROG = SY-CPROG
DYNPNR = SY-DYNR
DYNPROFIELD = 'screen field'
IMPORTING
RETURN_TAB = table of type DYNPREAD
Getting F4 help based on other field .
Suppose if there are 2 fields on selection screen user name and Purchasing Document and the case is getting values of Purchasing Document Number based on user name
Code:
TYPES:   BEGIN OF ty_match_nast,
                objky TYPE na_objkey,
                END OF ty_match_nast.
Data: it_match_nast   TYPE STANDARD TABLE OF ty_match_nast.
Data: it_dypr_val   TYPE STANDARD TABLE OF dynpread.
DATA: wa_dypr_val TYPE dynpread.
DATA: it_return TYPE STANDARD TABLE OF ddshretval.
Case when only username value is entered.
       SELECT objky
        FROM   nast
        INTO TABLE it_match_nast
         WHERE kappl = c_ef
         AND   kschl = c_neu
         AND   usnam = wa_dypr_val-fieldvalue.
      ENDIF.
*Read User name on selection screen field value
CLEAR wa_dypr_val.
REFRESH it_dypr_val.
wa_dypr_val-fieldname = 'P_UNAME'.      "User name
APPEND wa_dypr_val TO it_dypr_val.
*FM to get the value
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname             = sy-repid
      dynumb             = sy-dynnr
      translate_to_upper = 'X'
    TABLES
      dynpfields         = it_dypr_val_h.
*Pass the values to f4 table
   CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
        retfield     = u2018OBJKY'
        dynpprog    = sy-repid
        dynpnr      = sy-dynnr
        dynprofield = 'P_EBELN'
        value_org   = 'P'
     TABLES
        value_tab   = it_match_nast
        return_tab = it_return.

Custom Search Help for the field Equipment number

Hi,
I have enchanced sales order transaction and included a field Equipment number(EQUI-EQUNR).
Here after pressing F4(Search help) standard search help is display.
I have a requirement wherein, the standard search help should not appear and a customised search where a specific Equipment category type values should appear in the search help.
Ex. Field equipment category (EQTYP).EQUNR(Equipment Number).
Please let me know how to work for the customised search help.

Hi,
You need to create a customized search help.
[Elementary Search Help - Structure|http://help.sap.com/saphelp_nw04/helpdata/EN/cf/21ee38446011d189700000e8322d00/content.htm]
[Creating Elementary Search Helps|http://help.sap.com/saphelp_nw04/helpdata/EN/cf/21ee5f446011d189700000e8322d00/content.htm]
Then you need to attach the search help to the screen field..
[Assigning Search Helps to Screen Fields|http://help.sap.com/saphelp_nw04/helpdata/EN/cf/21ee93446011d189700000e8322d00/content.htm]
[Hierarchy of Search Help Call|http://help.sap.com/saphelp_nw04/helpdata/EN/0b/32e9b798da11d295b800a0c929b3c3/content.htm]
regards
Nitesh

How to create Search help for the field /SAPSLL/PRGEN-ATTR20V

Hi ,
I need to add a search help for the field /SAPSLL/PRGEN-ATTR20V and their is a chk table used for this field is /SAPSLL/TCOATV20.
In this table /SAPSLL/TCOATV20-ATTRV20V is a Primary key field.
How can I add search help for this field?
Any suggestions will be appreciated!
Regards,
Kittu

HI,
Fixed on my own..
I am closing this thread!
Thank you!
Kittu

F4 help for the batch field in VL02N transaction

Similar Messages

Maybe you are looking for