Facing a stubborn problem with the security note utility.

My system will not allow some users due to authorization issue.
I have looked at the access over and over again without avail.
Any additional tips would be appreciated from admins who have had issues with rsecnote utility.
Points will be awarded for helpful suggestions.
Cheers
Roger

Jared,
The solution was simple really. Object security-check was set incorrectly as "security_check"
The appropriate authorization is duly noted in 888889.
Cheers
Roger

Similar Messages

There is a problem with the security certificate of the proxy server. Error code 18 and 38.

Hi All,
After several hours and a short night of sleep I'm out of ideas and hopefully someone here can help me trying to solve this one. First of all the situation:
Exchange 2013 on a remote location with a CA-certificate.
Outlook 2010 and 2013 on different locations, locally installed and on RDS.
When I open Outlook on my laptop all is fine, no errors, good sync, no problem. But when I open Outlook on our Remote Desktop Servers with Outlook 2013 I'm getting errors like "There is a problem with the security certificate of the proxy server. The
name on the security certificate is invalid or does not match the name of the site. Outlook is unable to connect to this server. (Error code 18)". Opening Outlook 2010 the message is the same, but the error code now is 38.
After this Outlook opens and is working, there's one more error though. After a while an security warning pops up with the message: "Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the
site's security certificate. * The security certificate was issued by a company you have not chosen to trust. View the certificate to determine whether you want to trust the certifying authority. * The security certificate is valid. * The name on the security
certificate is invalid or does not match the name of the site."
Strangest thing is, it is the certificate of my RDS! It isn't my valid en officially bought certificate from my mailserver. What's going on? I'm out of options, what I've tried so far (in random order):
- restarting mailserver and AD;
- restarting switches;
- restarting routers;
- restarting RDS, AD and all other servers;
- bypassed proxyserver for RDS;
- created a new profile;
- checked recently installed updates;
- checked certificate on mailserver;
- checked RDS on a different location, working fine.
Nothing helped, what can I do next? Please advice.
Regards.

Found a thread that solves half my problem (https://social.technet.microsoft.com/Forums/office/en-US/70d18244-889a-4d95-ac3f-e234672a82b2/there-is-a-problem-with-the-proxy-servers-security-certificate-error-when-starting-outlook?forum=exchangesvrclients).
The first message can be suppressed by adding this to the Exchange config:
set-outlookprovider -Identity EXCH -CertprincipalName msstd:webmail.domain.tld
set-outlookprovider -Identity EXPR -CertprincipalName msstd:webmail.domain.tld
Giving the command get-outlookprovider, gives me empty information regarding the certprinipalname. Filled
this and after recreating the profile or deleting the ost-file I still have the second alert with the local certificate of my RDS.
Not completely where I want to be, any help regarding the second alert is greatly appreciated!

Facing lot of problems with the DATA object -- Urgent

Hi,
I am facing lot of problems with the data object in VC.
1. I created the RFC initially and then imported the data object in to VC. Later i did some modifications to RFC Function module,and when i reload the data object, I am not able to see the new changes done to RFC in VC.
2. Even if i delete the function module, after redeploying the IVIew, results are getting displayed.
3. How stable is the VC?
I restarted the sql server and portal connection to R3 is also made afresh.... still i am viewing such surprise results..
please let me know what might be the problem.

Hi Lior,
Are u aware of this problem.
If yes, please let me know...
Thanks,
Manjunatha.T.S

I have problem with the security question i forgot it some body tell me they will show down of the question forgot the answering but nothing show help me plz thanks

I have problem with the security question i forgot it some body tell me they will show down of the question forgot the answering but nothing show help me plz thanks

The reset link will only show if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?

Hi. I have a OS X Yosemite Version 10.10.1 Mac Book Air, Processor 1.86 GHz Intel Core 2 Duo.
Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?
The video starts out fine, but if I click on the expand icon in the lower right corner of the screen the audio won't keep up.
Refreshing the page don't help at all. In fact, nothing seems to help once it starts.
I did not have this problem at all using Mavericks. The problem started after installing Yosemite.
Any way to fix it?

only $99, i thought it was closer to $175.

TS3274 i have problem with the sound not working

i have problem with the sounds not working

Have you got notifications muted ? Only notifications (including games) get muted, so the iPod/Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

I have problem with the security question which i forgot the answer how can i change it as i already have apple id and password

I have problem with the security question which i forgot the answer how can i change it as i already have apple id and password

You may reset the password on your account by opening https://iforgot.apple.com/ in Safari and entering your Apple ID (your email address, which the moderators should have removed earlier).
You won't be able to set the password to your email address, or a recently-used password (if I remember correctly).
Once you change your password, you should update your password on your iOS device in Settings > iTunes & App Store, then tapping the "Apple ID: <username>" cell at the top to re-enter your password. (Your iOS device may prompt you for the new password before getting to Settings as well.)
Hope that helps. If you have a different issue, please post a follow-up message.

I have problem with the security questions and i dont know the answer. How i change the questions ?

I have problem with the security questions and i dont know the answer. How i change the questions ?

See Here... ask to speak with the Account Security Team...
Apple ID: Contacting Apple for help with Apple ID account security
Or Here > Apple Support iTunes Store Contact

Fixing the problem with the Device Not Recongized by WMP and Mediasource problem with MTP devi

PLEASE READ THE WHOLE THING!!! I KNOW IT SOUNDS LIKE MANY OTHER FAILED SOLUTIONS BUT YOU HAVE TO READ THROUGH MY WHOLE POST TO MAKE IT WORK!!!TRUST ME!!!
ok, now I read this a billion times, and felt that I was the only idiot that had a "bad" computer that didn't allow me to use my Zen mtp device... but it turns out I was more idiotic than I thought. I hope this helps those who have the same problem I had...here goes...
When you go to the Creative Labs website, go to Support, then Knowledge Base, then go to the MP3 players picture in the PRODUCT CATEGORY and click on it. You need to follow the steps that are described on the SID0053 Product Article. Then click on the Editing the System Registry link towards the bottom and it will tell you what to do...BUT there is something that I never ever did right and I bet lots of other folks didn't do right either. Once you are in the USB Properties seccion of the registry, YOU ACTUALY HAVE TO ADD THE WORD "EVERYONE" INTO THE ALLOWED SECCION!!! Not just because it says "Administrators" and what not means that EVERYONE IS ALLOWED, allow the word "everyone"thne click OK. Now, I did this with my Zen Touch on and plugged into the USB port and without the word DOCKED on it, as it wouldn't dock for me before this. that's it... hope it works for you, if it does then almost instantly the word DOCKED should appear on your MP3 player's Display. Hope that everyone has the same luck as I did. if not, I'll pray for you, I know how frustrating this problem is because I delt with it for toooooo long.

I had a similar problem with my Zen Touch, but the only symptom was not being able to install MediaSource or the Software Suite. I got the same messages that you did. I was able to use Windows Explorer to add/edit/remove files, but I wanted the Zen Media Explorer so that I could create playlists. After about 2 days of research and trial and error, I ended up fixing it by uninstalling/reinstalling the drivers.
If you don't know how to do that, here are instructions...
I'm using XP SP2, btw, so if you're using another version of Windows, it might be slightly different...
) With the Zen connected, Right-click on "My Computer"
2) Select "Properties"
3) Click on the "Hardware" tab and select "Device Manager"
4) Right Click on "MTP Device" (or MTP Media Player) and select "Uninstall"
5) Disconnect the player from the computer, wait about 5 secs, and reconnect.
When you reconnect it, the drivers will be reinstalled. Try running the setup again after that.
If that still doesn't work, look for random optional Windows updates, maybe?...esp. PlaysForSure, WMP, or USB/mobo/INF/Chipset driver updates...or maybe when it says "Setup could not detect and portable device on your system. Setup will now install the necessary drivers to enable your device to be detected," it actually <i>is</i> doing something, but it isn't apparent until you reinstall the driver. To be honest, I just don't know. The computer I'm using is only a few months old and I didn't have any problems installing on an older computer.
Oh well. I hope that fixes your problem.
As far as the problem with the 360 connectivity, I'm sorry I can't help you there.Message Edited by potestasx on -03-2006:28 PM
Message Edited by potestasx on -03-2006:45 PM

Getting problem with the new java.util.concurrent package

i m using the new concurrency package of jdk 1.5 in my code. see the line:
Executor threadPool = Executors.newCachedThreadPool();
about this, api doc says Creates a thread pool that creates new threads as needed, but will reuse previously constructed threads when they are available
but i dont find this method to create new threads whenever required. please tell me about this.
in my code, in some rare cases many threads r created, and very difficult to detect the number of active threads.
as the previous one failed i tried with another one newFixedThreadPool(int). but here i got another problem. it works successfully but i dont understand what should be the size of the pool. i tried with 1000, it works well, but in a very rare case, it failed also. then i tried with 10000. but i m still confused, i dont know whether it would work always or not. with traditional threads my code never fails.
please tell me, what should be the size of the pool and also let me know what is the problem with the first one (newCachedThreadPool)

The thread pool should not be more than 100 threads. Ideally you should only have a small number of threads per CPU. If your threads are not long running it is possible that you could add 10,000 runnables but on start a small number of threads. Note, adding a thread take a non trivial amount of time so while the thread is added, all the others could finish. This could mean the number of threads could be 140 or smaller.
Have you looked at the code to see what it does?

Problems with the security backups

hello everyone
Please i need some help, how can i delete the security backup that is using almost my entire flash memory ??
I have a MBA with 256 gb mid 2013 with OS X mavericks
PD: sorry about my english
thanks

When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.

I have intermittent connectivity. Its a problem with the ipad not the service, i have checked using other ipads

I i am using Comcast Internet with router for Wi-Fi. I don't have problems with my computer or any other device just the iPad and the problem is intermittent. I have also tried to reset the modem and other things but nothing has worked to help the problem. the problem showed up about two weeks ago. Does this sound familiar?

I i am using Comcast Internet with router for Wi-Fi. I don't have problems with my computer or any other device just the iPad and the problem is intermittent. I have also tried to reset the modem and other things but nothing has worked to help the problem. the problem showed up about two weeks ago. Does this sound familiar?

Why having problems with the sim, not supported carrier?

My provider Orange UK has allowed me to unlock my iphone and has send to me all the steps. WHen trying to unlock my iphone, it gives me this message error
" The SIM card that you currently have installed in this iphone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iphone. Please insert another SIM card from a supported carrier or request that this iphone be unlocked by your carrier. Please contact Apple for more information"
I bought a non Orange 3G sim card as they mentioned and there is this message. Anyone can help me to unlock my iphone?
THanks!

Have you followed all the steps for unlocking your iPhone, as listed here?
http://support.apple.com/kb/HT5014
If so, did you get the "your iPhone has now been unlocked" message after you restored the iPhone?

Problem with the Export/Import Utility when importing a .portal file

Hi there !
I got the following error when trying to import a .portal file to a desktop by using the Export/Import Utility.
<13-11-2009 12:13:26 PM CLST> <Error> <netuix> <BEA-423487> <Import: did not add navigable [2203] as it would cause an illegal dependency.>
The error is shown several times, starting from the number [2203] until [2285].
It causes that i can't see some pages of my portal... it's like they dont exist.
I Hope you can help me fix it, because i have not found any information about it.
Best regards
P.D.: I am using the BEA Weblogic 10.0.1 version.
Edited by: user12231353 on 16-nov-2009 12:38

I upgraded to cs6 and imported all the images together, I made them 3 frames per and exported them. The problem is slightly improved but still there. I'm still getting flicker.
Check it out: http://www.youtube.com/watch?v=g_yZjskzTLs
Black screen version from yesterday if you want to look at it: http://www.youtube.com/watch?v=NCcAEO8YU6Y
The problem has to be with my settings. when I upgraded it deleted all my prefrences and settings. There was no dslr preset either so I had to redo it all from scratch to the best of my ability. Here is a complete rundown of my settings:
I shoot with a canon dslr 60D in 24fps and upload all my stuff in 1080p. Please advice.

We are still having problems with the "Could not initialize the application's security component" error message after performing suggested fixes?

We have been attempting to resolve this error in our Lab Environment with FireFox version 14.0.1. The application has been virtually installed in our PC environment, running WIN 7 and launches without error for most users. When performing the suggest "fixes" at http://support.mozilla.org/en-US/kb/couldnt-initialize-applications-security-component we found:
1. There is adequate hard drive space
2. Permissions are set correctly.
3. Once the "Cert8" file is deleted it does not regenerate upon logging out and relaunching Firefox. Not sure why this occurs.
4. Could not create a new profile since these rights are not extended to users in the lab environment.
Is anyone using Firefox in a similar lab environment, having this same issue and been able to resolve the problem? Does version 15.0.1 address this problem and provide a fix?

Try to remove or rename the secmod.db (secmod.db.old) file in the Firefox Profile Folder.
If that didn't help then remove or rename cert8.db (cert8.db.old) as well.
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder
*http://kb.mozillazine.org/Profile_folder_-_Firefox
* C:\Users\<user>\AppData\Roaming\Mozilla\Firefox\Profiles\<profile>\
The "Application Data" folder in XP/Win2K and the "AppData" folder in Vista/Windows 7 are hidden folders.
*http://kb.mozillazine.org/Show_hidden_files_and_folders

Facing a stubborn problem with the security note utility.

Similar Messages

Maybe you are looking for