Facing bug Issue with Visual Studio 2010 SP1 software. need a Hotfix Patch KB2561001

Hi Team,
i have installed Visual Studio 2010 SP1 software in my system. but i am facing some issue with a bug. This bug needs a Specific Hotfix Patch ( KB2561001).
But when i am clicked on above link, not able to find this patch.
Kindly request you to provide this Requested patch as project has been stuck without this.
please look into this issue on priority. Eager to listen from your side.

Hi mihir ray,
Like this report:
https://connect.microsoft.com/VisualStudio/feedback/details/611665/storegeneratedpattern-does-not-saved-properly-into-edmx-entity-framework-4-0
It seems that the link for this kb is not available. So the real issue is that which kind of issue you get, and then check whether this issue has been resolved by the latest VS version. Like the above report, maybe the new VS version would be better for
certain limitations for old versions.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

I need help linking Microsoft SDK to My visual studio 2010 sp1 project?

I need help linking Microsoft SDK to My visual studio 2010 sp1 project?
Hi, I'm on windows 8.1 and I'm getting a lot of Direct x sdk errors every time I try to debug or release a project. Please help me I'm lost trying to fix's this, thanks.

Hi programmerblizz,
According to your description, could you please tell me which kind of project you try to debug or release? Is it a c++ project or other?
If it is a c++ project, I suggest you can refer the following thread check your issue in your side.
Reference:
http://stackoverflow.com/questions/26303922/directx-9-cannot-find-the-include-libaries
If no, please tell me more detail message about your issue.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Compile Plug-in with Visual Studio 2010 beta

Hello there,
I know that only Visual Studio 2005 is supported for the Acrobat SDK. But maybe one of you is also experimenting with visual Studio 2010 and got it to work.
I get the following error message. Did anyone solve this problem.
Error    105    error MSB3073: The command "if not "¬roSDKPIDir%"a == ""a if not exist "¬roSDKPIDir%" mkdir "¬roSDKPIDir%"
if not "¬roSDKPIDir%"a == ""a copy "C:\Users\test\Documents\Visual Studio 2010\Projects\EPapers_Button\EPapers_Button\Debug\EPapers_Button.dll" "¬roSDKPIDir%"
if not "¬roSDKPIDir%"a == ""a echo EPapers_Button copied to "¬roSDKPIDir%".
if "¬roSDKPIDir%"a == ""a echo not performed. AcroSDKPIDir environment variable not set.
:VCEnd" exited with code 255.
Thanks for your help.

this is something that i tried i set AcroSDKPIDir to
C:\acrobatxsdk\Adobe\Acrobat 10 SDK\Version 1\PluginSupport\Samples\WeblinkDemo\win32\Debug
and in th e post build events i did the following
<Target Name="PostBuildEvent" Condition="'$(PostBuildEventUseInBuild)'!='false'">
    <Message Text="Description: %(PostBuildEvent.Message)" Condition="'%(PostBuildEvent.Message)' != '' and '$(AcroSDKPIDir)'"/>
    <Exec Command="%(PostBuildEvent.Command)$(BuildSuffix)" Condition="$(AcroSDKPIDir)"/>
</Target>
can u be plzz more specific in terms of it
the error i got is
Error
84
error MSB4100: Expected "$(AcroSDKPIDir)" to evaluate to a boolean instead of "C:\acrobatxsdk\Adobe\Acrobat 10 SDK\Version 1\PluginSupport\Samples\WeblinkDemo\win32\Debug", in condition "'%(PostBuildEvent.Message)' != '' and '$(AcroSDKPIDir)'".
C:\Program Files (x86)\MSBuild\Microsoft.Cpp\v4.0\Microsoft.CppCommon.targets
112
61
WeblinkDemo

Is ODAC 11.2 Release 4 (11.2.0.3.0) XCopy support Visual Studio 2010 sp1?

I download and installed "ODAC112030Xcopy_32bit.zip" on Windows7 64bit machine according to the included readme.htm (added c:\oracle and c:\oracle\bin to environment variables, added ORACLE_HOME and ORACLE_HOME_KEY registry), but while I try to add ADO.NET Entity Data Model, I cannot find the Oracle ODP.Net provider list in wizard.
I didn't install "Oracle Developer Tools for Visual Studio", is it a must for EntityFramework? Or something else I missed?

Hi,
Yes, you need to install the Oracle Developer Tools for Visual Studio in the 32-bit home in order to use the Entity Framework tools with Visual Studio 2010.
Feature for 11.2.0.3.0 R4 ODT:
Entity Framework Designers and Wizards: Use Visual Studio 2010's Entity Designer for Database First and Model First object-relational mapping
Regards
Jenny
Edited by: jbesaw on Mar 16, 2012 12:03 PM

Beginning SharePoint 2010 Development with Visual Studio 2010

I am a beginner with SharePoint 2010 development with Visual studio 2010. Please guide me for some good, practical videos tutorials and books which would help me get started with programming. I need to build some workflow in VS2010 in C#. Please help!

Hi PinkRuby,
There are some good videos on the MSDN site that give a general overview of developing on the SharePoint platform.
http://msdn.microsoft.com/en-au/office/dn448488
Another good resource is PluralSight. You need a paid subscription (though it's not much), but it has lot's of great video content for learning.
http://pluralsight.com/training/Courses#sharepoint
Regards, Matthew
MCPD | MCITP
My Blog
View
Matthew Yarlett's profile
See my webpart on the TechNet Gallery that allows administrative users to upload, crop and format user profile photos. Check it out here:
Upload and Crop User Profile Photos

ODAC 11.2.0.3.0 with Visual Studio 2008 SP1

Hi,
Yesterday I installed the latest version on ODAC 11.2.0.3.0 on my machine. Now when I am trying to add a new ADO.NET Entity Data Model to my project, it doesn't show me my Oracle Database there when I select "Generate from Database". Also when I select New Connection try to add one explicitly, I dont see "Oracle" in the "Choose DataSource" option.
I am using Visual Studio 2008 SP1.
Please do someone know the solution to this issue.
Thanks,
Reena

Hi,
I installed VS 2010, still I dont see Oracle in the list, Though as I said before when I try to add a new connection through server explorer,I do see Oracle database there.
Below is the details.
Microsoft Visual Studio 2010
Version 10.0.30319.1 RTMRel
Microsoft .NET Framework
Version 4.0.30319 RTMRel
Installed Version: Professional
Microsoft Office Developer Tools 01018-532-2002102-70174
Microsoft Office Developer Tools
Microsoft Visual Basic 2010 01018-532-2002102-70174
Microsoft Visual Basic 2010
Microsoft Visual C# 2010 01018-532-2002102-70174
Microsoft Visual C# 2010
Microsoft Visual C++ 2010 01018-532-2002102-70174
Microsoft Visual C++ 2010
Microsoft Visual F# 2010 01018-532-2002102-70174
Microsoft Visual F# 2010
Microsoft Visual Studio 2010 Team Explorer 01018-532-2002102-70174
Microsoft Visual Studio 2010 Team Explorer
Microsoft Visual Web Developer 2010 01018-532-2002102-70174
Microsoft Visual Web Developer 2010
Crystal Reports Templates for Microsoft Visual Studio 2010
Crystal Reports Templates for Microsoft Visual Studio 2010
Microsoft Visual Studio 2010 SharePoint Developer Tools 10.0.30319
Microsoft Visual Studio 2010 SharePoint Developer Tools
Thanks,
Reena

Problem when adding ABAP custom webservice with Visual Studio 2010

Hi All,
After creating a webservice for a custom RFC function developed in a ECC6.0 SAP machine, I tried to add it to a Visual Studio 2010 windows aplication (through a web reference connection).
The sequence I've done is:
- Create RFC in ABAP, with testing ok
- Create a WEBSERVICE with the ABAP editor
- Configured the webservice with SICF with:
     Procedure: Standard
     Logon data: standard R3 user
     Security requirement: Standard
     Authentication: Standard SAP User
Then, in SOAMANAGER I copied the webservice URL and tried to add it to Visual Studio 2010, but it keeps asking me the user and password. I try to supply the R3 username and password but if fails.
Why is ECC6.0 asking the user and passord if I've defined a SAP user for the login process?
Is there any way to disable this?
Thanks,
Manuel Dias

Hello Manuel,
You can use the following code:
CredentialCache cache = new CredentialCache();
      cache.Add(new Uri("WEBSERVICEURL:PORTNUMBER/"), "Basic", new NetworkCredential("USERNAME", "PASSWORD"));
SAP needs a password.
Kind regards,
JK

RFC & BAPI with Visual Studio 2010 (C/ C++)

Hello,
I would to develop, into MS Visual Studio 2010 (c/ c+), a application that allows establishing a RFC connection to SAP (ECC6) and call a Z program, or call a BAPI from my c/c+ application.
Can you recommend a good documentation, possibly with examples?
If anyone has any sample code, maybe a project in MS VS (c/c++), would be great.
Sincerely,
Serena

Hi,
Hope the following code will help you.
For establishing connection:
public class MyBackendConfig : IDestinationConfiguration
            public RfcConfigParameters GetParameters(String destinationName)
                if ("SE38".Equals(destinationName))
                    RfcConfigParameters parms = new RfcConfigParameters();
                    parms.Add(RfcConfigParameters.AppServerHost, "192.168.1.14");
                    parms.Add(RfcConfigParameters.SystemNumber, "02");
                    parms.Add(RfcConfigParameters.User, "abaper");
                    parms.Add(RfcConfigParameters.Password, "erpanderp");
                    parms.Add(RfcConfigParameters.Client, "800");
                    parms.Add(RfcConfigParameters.Language, "EN");
                    parms.Add(RfcConfigParameters.PoolSize, "5");
                    parms.Add(RfcConfigParameters.MaxPoolSize, "10");
                    parms.Add(RfcConfigParameters.IdleTimeout, "600");
                    return parms;
                else return null;
            public bool ChangeEventsSupported()
                return false;
            public event RfcDestinationManager.ConfigurationChangeHandler ConfigurationChanged;
Getting tables from BAPI:
private void button1_Click(object sender, EventArgs e)
            checkedListBox1.Items.Clear();
            RfcDestination prd = RfcDestinationManager.GetDestination("SE38");
            RfcRepository repo = prd.Repository;
            IRfcFunction companyBapi1 = repo.CreateFunction("ZBAPI_PACKAGE_OBJECTLIST");
            string package = "EU_" + comboBox1.SelectedItem.ToString();
            companyBapi1.SetValue("PACKNAME", package);
            companyBapi1.Invoke(prd);
            IRfcTable address1 = companyBapi1["TOBJECTS"].GetTable();
            if (address1.RowCount != 0)
                for (int index = 0; index < address1.RowCount; ++index)
                    checkedListBox1.Items.Add(address1[index]["PROGRAM"].GetString());
                    panel2.Visible = true;
            else
                MessageBox.Show("No Programs Found");

Adobe Reader 7.0 issue with Visual Studio 2003

I'm working on a windows form using Visual Studio 2003(Dot Net Framework 1.1) and has got a PDF Viewer in that application to show the reports in PDF Viewer (Adobe Reader 7.0). After adding the reference of COM component (Adobe Acrobat 7.0 Browser Document), I'm unable to build my visual studio solution because of an error "Unable to emit assembly: Referenced assembly 'Interop.AcroPDFLib' does not have a strong name". The same visual studio solution works fine with Adobe Acrobat Reader 6.0. Pleae help me to overcome this issue...

Hi tristan,
how are you doing ?
as per the pre req for NCo,
u're JRE is requested to be : 1.3
http://help.sap.com/saphelp_nw2004s/helpdata/en/b4/79cb9463b89a41a73e1e2805eb4bf7/frameset.htm
i successfully use j2sdk 1.4_13, but i am aware of issues when you use jdk 1.5 for other SAP [Portal] related products, try jdk 1.4_12 or 1.4_13 and see if there is any difference
also is there any requirment for VS 2003 & 2005 on the same machine ?
i am curious to understand the problems you are facing with this config
with respect,
amit

NCO 2.0 issue with Visual Studio 2003

Hi,
I was attempting to use the SAP Connector for .Net version 2.0 on a machine that has both Visual Studio 2003 and 2005 installed. However, I cannot seem to get the wizard to work correctly in either one. On VS2005, the SaP Connector doesn't even show up in the project types. On VS2003, it does, but the wizard screen doesn't come up. Instead, I am forced to use the Server Explorer toolbar to search for RFC and BAPI functions. I used the guide published by Anne Tarnoruder, Reiner Hille-Doering regarding this subject (Using SAP Connector for MS .Net (NCO) in Microsoft Visual Studio 2005), however, whenever I add an SAP Connector Proxy item to a project, it generates a half-done SAPProxy1.cs and the requisite .wsdl designer file. After selecting one or more RFCs via the SAP server explorer toolbox and dropping it to the proxy designer, it doesn't appear to update the half-done SAPProxy1.cs. Is this the way it is supposed to work? I am using XP with SP2 and Java 1.5 update 11.
Regards,
Tristan

Hi tristan,
how are you doing ?
as per the pre req for NCo,
u're JRE is requested to be : 1.3
http://help.sap.com/saphelp_nw2004s/helpdata/en/b4/79cb9463b89a41a73e1e2805eb4bf7/frameset.htm
i successfully use j2sdk 1.4_13, but i am aware of issues when you use jdk 1.5 for other SAP [Portal] related products, try jdk 1.4_12 or 1.4_13 and see if there is any difference
also is there any requirment for VS 2003 & 2005 on the same machine ?
i am curious to understand the problems you are facing with this config
with respect,
amit

Network Issues with Visual Studio Online Application Insgihts

My team is using Visual Studio Application Insights to monitor availability of our web server (we use cloud service)by making a call to it every 5 minutes from different locations around the world including Singapore, Japan, France and Switzerland.
We experienced continuous failures of this monitoring from Singapore from September, 19-th and the issue became very big on September 21-st, September, 22-nd. After that on September, 23-rd and 24-th we have failures form Paris. Then starting from September,
24-th to September, 26 we have very high percent of failures from Japan. Our problems finished with one more failure coming from Switzerland on September, 26.
I wanted to find what the source of the problem is since we checked our code and it very simple to cause network issues. However, it is very difficult to reproduce the issue. My questions is - were all these problems coming from Visual Studio Online Application
Insights?
One example error that it is tracked in Visual Studio Online Application Insights is:
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because
connected host has failed to respond 138.91.9.51:8080
   at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at Microsoft.VisualStudio.TestTools.WebStress.WebTestTransaction.ResponseReceived(IAsyncResult result)
   at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
Thank you!
Kanio

Hello Kanio,
There is nothing AI-specific in the stack, and, since the exception was reported to the portal, I would say that AI was working that time. However, if the issues goes away as soon as you disable AI - then it might mean that the issue is induced by AI presence.
Also, you can try the latest AI SDK (0.13 as of today) and see if the issue still happens.
Dmitry Matveev

Crystal Reports 10 with Visual Studio 2010

We have Crystal Reports 10, which I have installed. The viewer provided with the install runs fine. We have an application that has an embedded viewer.
Then I'm just trying to get the simple C# sample code to run in VS2010, which is just a form with the viewer component reading an existing .rpt file. But I get a "Load report failed" error with no other details. Seems like it really should be simple. Any idea what I might be doing wrong?
I'm running Win7 64, but compiling in x86 mode.

Well, you have two options;
1) Go with the version of CR that bundles with .NET2005 (CR 10.2)
2) Go with CRVS2010 and VS2010
CR10.0 is not supported in either .NET2005 or .NET2010. See [this|https://wiki.sdn.sap.com/wiki/display/BOBJ/WhichCrystalReportsassemblyversionsaresupportedinwhichversionsofVisualStudio+.NET] wiki for more info.
There are no work-arounds, no nothing that I can help with or recommend.
- Ludek

Error in upgrade Crystal Reports for Visual Studio 2010 to SP1

During the installation of SP1 of Crystal Reports for Visual Studio 2010 (RTM was already installed) I got an error message saying:
Error 2753. The file "agent.exe.6ED28686_7B19_420C_B255_5B6C1BD2C705" is not marked for installation.
After a rerun of the setup program (choosing reinstall) the message did not re-appear.
It happens on Windows 7 x64 with Visual Studio 2010 SP1
Is this a bug in the installation or an "undocumented feature"?
Regards,
Adri

Hi Adri,
I had that error once and one other poster also had it. Like you I just re-installed and no error on the second round.
I believe it was some Windows Process had the file locked for some reason. It's not a bug or "undocumented feature" it's a Windows OS thingy....
Before uninstalling anything it may be a recommendation to reboot first and not load anything that may be locking dependencies.
How many times have you seen this?
Thank you
Don

Issue with New Release Deploying Crystal Reports for Visual Studio 2010

Previously I created a deployment project with Visual Studio 2010 using the Beta 2 release of the distributable. This worked fine and installed on a 32-bit XP machine.
I've since updated the project to use the new Release version of the distributable CRRuntime_32bit_13_0.msi. Now when I run the installed program it gives me the following message -
"An error has occurred while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient, or the Crystal Reports runtime is not installed correctly. Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information."
I've had a look at verious posts and added code to the app.config file so it looks like -
<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/>
</startup>
and also tried targetting various .NET frameworks, but without success.
Am I missing something?

Hello,
More info, are you installing on the same PC as the Beta was installed on or a clean PC?
Your app must be set to the full framework, not the client version.
Are you installing by right clicking on your setup.exe and selecting run as administrator?
Setting that option in the app.config is only required if you are using that driver you found the info on.
Run ProcessMonitor and set it to filter your installer and see what it reports.
Thank you
Don

Error LNK1123 on Windows 7 Visual Studio 2010

I tried to build the Windows verison of PuTTY on my Windows 7 workstation using VS 2010. The code compiled with some warnings about deprecated functions but it produces an error 'LNK1123: failure during conversion to COFF: file invalid
or corrupt'.
I went to the Property Pages->Linker->General and set incremental linking to 'No'. I also entered the folder path where the file 'cvtres.exe' is located. I also installed Visual Studio 2010 SP1. I also set 'Embed Manifest' to 'No'. Nothing
seems to work.
I have rebooted and rebuilt the entire project at least ten times with the changes mentioned above implemented. There is something else I probably missed however, I do not see it in the threads on the various blogs and forums.
Taurus64

Hi Taurus64,
>>I tried to build the Windows verison of PuTTY on my Windows 7 workstation using VS 2010.
If it generated the error when you build your project, I doubt that this forum is not the correct forum for this issue since this forum is to discuss the VS IDE.
But one important issue is that whether it is related to third party product. Would you mind letting us know more information about the "PuTTY "?
Maybe you could get better support here:
http://www.chiark.greenend.org.uk/~sgtatham/putty/
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Facing bug Issue with Visual Studio 2010 SP1 software. need a Hotfix Patch KB2561001

Similar Messages

Maybe you are looking for