Error LNK1123 on Windows 7 Visual Studio 2010

I tried to build the Windows verison of PuTTY on my Windows 7 workstation using VS 2010. The code compiled with some warnings about deprecated functions but it produces an error 'LNK1123: failure during conversion to COFF: file invalid
or corrupt'.
I went to the Property Pages->Linker->General and set incremental linking to 'No'. I also entered the folder path where the file 'cvtres.exe' is located. I also installed Visual Studio 2010 SP1. I also set 'Embed Manifest' to 'No'. Nothing
seems to work.
I have rebooted and rebuilt the entire project at least ten times with the changes mentioned above implemented. There is something else I probably missed however, I do not see it in the threads on the various blogs and forums.
Taurus64

Hi Taurus64,
>>I tried to build the Windows verison of PuTTY on my Windows 7 workstation using VS 2010.
If it generated the error when you build your project, I doubt that this forum is not the correct forum for this issue since this forum is to discuss the VS IDE.
But one important issue is that whether it is related to third party product. Would you mind letting us know more information about the "PuTTY "?
Maybe you could get better support here:
http://www.chiark.greenend.org.uk/~sgtatham/putty/
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Error with windows phone 7.1 in visual studio 2010 ultimate

System.ArgumentNullException
Value cannot be null.
Parameter name: parentContext
at Microsoft.Windows.Design.Metadata.ReflectionMetadataContext..ctor(IMetadataContext parentContext)
at MS.Internal.Host.ProjectMetadataContext..ctor(IMetadataContext platformMetadata, AssemblyReferenceProvider referenceProvider)
at MS.Internal.Host.ProjectMetadataContext.FromReferences(AssemblyReferenceProvider referenceProvider)
at MS.Internal.Designer.VSDesigner.GetMetadataForDesignerContext(DesignerContext designerContext)
at MS.Internal.Host.PersistenceSubsystem.Load()
at MS.Internal.Host.Designer.Load()
at MS.Internal.Designer.VSDesigner.Load()
at MS.Internal.Designer.VSIsolatedDesigner.VSIsolatedView.Load()
at MS.Internal.Designer.VSIsolatedDesigner.VSIsolatedDesignerFactory.Load(IsolatedView view)
at MS.Internal.Host.Isolation.IsolatedDesigner.BootstrapProxy.LoadDesigner(IsolatedDesignerFactory factory, IsolatedView view)
at MS.Internal.Host.Isolation.IsolatedDesigner.BootstrapProxy.LoadDesigner(IsolatedDesignerFactory factory, IsolatedView view)
at MS.Internal.Host.Isolation.IsolatedDesigner.Load()
at MS.Internal.Designer.DesignerPane.LoadDesignerView(Boolean isReload)
this error occurs all the time i tried to open a windows phone aplication and i dont no wtf is this?

Hi PedroMartins221,
From your error message looks like it is a VS designer issue, I would recommend you do the same as Ken suggested, besides keep your windows update and reboot the device machine should help.
Another possibility is maybe you update with Silverlight 5.0, as I can see from a old post:
https://social.msdn.microsoft.com/Forums/en-US/5964a4c7-7a5b-4d09-a672-268d37aad1ff/windows-phone-7-designer-view-error-in-visual-studio-2010-ultimate?forum=vswpfdesigner uninstall Silverlight 5 might help.
Give a try and let's see if this helps.
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Crystal report for visual studio 2010 data source object is not valid error

Hello,
I receive an "data source object is not valid" error when I want to print one CR document after setting an ADODB.Recordset on SetDataSource method of my report.
On my developer station, this operation works without problem but on client station, I get this error.
The redistributable package for client is installed on client side (CRRuntime_32bit_13_0_1.msi).
Can someone help me?
Thank you.

Thank's for your answers
Dim rsPkLst As ADODB.Recordset = Nothing
Dim report As New crPickingList
' Fill ADODB.Recordset with SQL Statment
If rsPkLst.RecordCount > 0 Then
report.SetDataSource(rsPkLst) ' Error : The data source object is invalid
EndIf
This error appears during "report.SetDataSource(rsPkLst)" instruction.
ADODB drivers are already installed and my ADODB.Recordset is filled with good records.
This project is an updated project from Visual Studio 2003 to Visual studio 2010 and the old version was running fine.
Developer and client station runs under Windows XP SP3.
On developer side I install CRforVS_13_0_1 (BuildVersion=13.0.1.220.Cortez_CR4VS).
On client side I install CRRuntime_32bit_13_0_1.msi.
Both stations use Microsoft .Net Framework 4.
Move to ADO.NET is a solution but, for the moment, I do not have the time to change all applications from my company.
(I get this error from all application updated from VS 2003 to VS 2010 developed since 2005)
David.

Microsoft Visual Studio 2010 Tools for Office Runtime installation Error

Hi Team,
Am facing error while installing Microsoft Visual Studio 2010 Tools for Office Runtime installation. Request you to please check and let me know.
Component Microsoft Visual Studio 2010 Tools for Office Runtime (x86 and x64) has failed to install with the following error message:
"User cancelled installation. "
The following components failed to install:
- Microsoft Visual Studio 2010 Tools for Office Runtime (x86 and x64)
See the setup log file located at 'C:\Users\ALAKKOJU\AppData\Local\Temp\VSDF353.tmp\install.log' for more information.
The following properties have been set:
Property: [AdminUser] = true {boolean}
Property: [InstallMode] = HomeSite {string}
Property: [ProcessorArchitecture] = AMD64 {string}
Property: [VersionNT] = 6.1.1 {version}
Running checks for package 'Windows Installer 3.1', phase BuildList
The following properties have been set for package 'Windows Installer 3.1':
Running checks for command 'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe'
Result of running operator 'VersionGreaterThanOrEqualTo' on property 'VersionMsi' and value '3.1': true
Result of checks for command 'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe' is 'Bypass'
'Windows Installer 3.1' RunCheck result: No Install Needed
Running checks for package 'Microsoft .NET Framework 4 (x86 and x64)', phase BuildList
Reading value 'Version' of registry key 'HKLM\Software\Microsoft\NET Framework Setup\NDP\v4\Full'
Read string value '4.0.30319'
Setting value '4.0.30319 {string}' for property 'DotNet40Full_TargetVersion'
The following properties have been set for package 'Microsoft .NET Framework 4 (x86 and x64)':
Property: [DotNet40Full_TargetVersion] = 4.0.30319 {string}
Running checks for command 'DotNetFX40\dotNetFx40_Full_x86_x64.exe'
Result of running operator 'ValueEqualTo' on property 'InstallMode' and value 'HomeSite': true
Result of checks for command 'DotNetFX40\dotNetFx40_Full_x86_x64.exe' is 'Bypass'
Running checks for command 'DotNetFX40\dotNetFx40_Full_setup.exe'
Result of running operator 'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite': false
Result of running operator 'VersionGreaterThanOrEqualTo' on property 'DotNet40Full_TargetVersion' and value '4.0.30129': true
Result of checks for command 'DotNetFX40\dotNetFx40_Full_setup.exe' is 'Bypass'
'Microsoft .NET Framework 4 (x86 and x64)' RunCheck result: No Install Needed
Running checks for package 'Microsoft Visual Studio 2010 Tools for Office Runtime (x86 and x64)', phase BuildList
Reading value 'Version' of registry key 'HKLM\SOFTWARE\Microsoft\VSTO Runtime Setup\v4R'
Unable to read registry value
Not setting value for property 'VSTORuntimeVersionInstalled'
The following properties have been set for package 'Microsoft Visual Studio 2010 Tools for Office Runtime (x86 and x64)':
Running checks for command 'VSTOR40\vstor40_x86.exe'
Skipping ByPassIf because Property 'VSTORuntimeVersionInstalled' was not defined
Result of running operator 'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'Intel': true
Result of checks for command 'VSTOR40\vstor40_x86.exe' is 'Bypass'
Running checks for command 'VSTOR40\vstor40_x64.exe'
Skipping ByPassIf because Property 'VSTORuntimeVersionInstalled' was not defined
Result of running operator 'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'AMD64': false
Result of running operator 'ValueEqualTo' on property 'AdminUser' and value 'false': false
Result of checks for command 'VSTOR40\vstor40_x64.exe' is 'Install'
'Microsoft Visual Studio 2010 Tools for Office Runtime (x86 and x64)' RunCheck result: Install Needed
EULA for components 'Microsoft Visual Studio 2010 Tools for Office Runtime (x86 and x64)' was accepted.
Copying files to temporary directory "C:\Users\ALAKKOJU\AppData\Local\Temp\VSDF353.tmp\"
Downloading files to "C:\Users\ALAKKOJU\AppData\Local\Temp\VSDF353.tmp\"
(1/7/2015 12:47:44 PM) Downloading 'VSTOR40\vstor40_x64.exe' from 'http://go.microsoft.com/fwlink/?LinkId=158918' to 'C:\Users\ALAKKOJU\AppData\Local\Temp\VSDF353.tmp\'
Download completed at 1/7/2015 12:48:26 PM
Verifying file integrity of C:\Users\ALAKKOJU\AppData\Local\Temp\VSDF353.tmp\VSTOR40\vstor40_x64.exe
WinVerifyTrust returned 0
File trusted
Running checks for package 'Microsoft Visual Studio 2010 Tools for Office Runtime (x86 and x64)', phase BeforePackage
Reading value 'Version' of registry key 'HKLM\SOFTWARE\Microsoft\VSTO Runtime Setup\v4R'
Unable to read registry value
Not setting value for property 'VSTORuntimeVersionInstalled'
The following properties have been set for package 'Microsoft Visual Studio 2010 Tools for Office Runtime (x86 and x64)':
Running checks for command 'VSTOR40\vstor40_x64.exe'
Skipping ByPassIf because Property 'VSTORuntimeVersionInstalled' was not defined
Result of running operator 'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'AMD64': false
Result of running operator 'ValueEqualTo' on property 'AdminUser' and value 'false': false
Result of checks for command 'VSTOR40\vstor40_x64.exe' is 'Install'
'Microsoft Visual Studio 2010 Tools for Office Runtime (x86 and x64)' RunCheck result: Install Needed
Verifying file integrity of C:\Users\ALAKKOJU\AppData\Local\Temp\VSDF353.tmp\VSTOR40\vstor40_x64.exe
WinVerifyTrust returned 0
File trusted
Installing using command 'C:\Users\ALAKKOJU\AppData\Local\Temp\VSDF353.tmp\VSTOR40\vstor40_x64.exe' and parameters ' /q:a /c:"install /q /l"'
Process exited with code 1602
Status of package 'Microsoft Visual Studio 2010 Tools for Office Runtime (x86 and x64)' after install is 'InstallFailed'
Thanks,
Anil

Hi Anil,
According to the error message "User cancelled installation" and the log "Process exited with code 1602", it seems that it is you cancelled the installation that cause the install fail. Is that true? If yes, please reinstall
it without cancelling it. You can take the following steps:
Download "Visual Studio 2010 Tools for Office Runtime" from
http://www.microsoft.com/en-us/download/details.aspx?id=42513 .
Run the downloaded vstor_redist.exe with admin.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Crystal Report errors when installing visual studio 2010 app

I'm trying to install a Visual Studio 2010 application on two client's machines and I get a different error on each one. Both errors point to Crystal Reports.
I have a feeling that I'm supposed to install something on the client's machines but I'm not sure what.
The first client's error says that CrystalDecisions.Windows.Form Version 13.0.2000.0 cannot be loaded.
The second client's error says that FlashControlV71. Version 1.0.3187.32366 needs to be installed in the GAC.
What am I supposed to install on the client's machines? Or if that's not the problem, what is causing the errors?
This is my first visual studio app so I'm a complete newbie.
Thanks for any help or advice.

Thanks for your reply. I installed the runtime (x64) and am now getting a new error on the first client's machine. I think it's telling me that I installed the wrong version of the runtime. The client is running x64t Win 7 so I chose the x64 runtime to install.
System.TypeInitializationException: The type initializer for 'CrystalDecisions.CrystalReports.Engine.ReportDocument' threw an exception. ---> CrystalDecisions.CrystalReports.Engine.LoadSaveReportException: An error has occurred while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient, or the Crystal Reports runtime is not installed correctly. Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.CheckForCrystalReportsRuntime()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument..cctor()
   --- End of inner exception stack trace ---
   at CrystalDecisions.CrystalReports.Engine.ReportDocument..ctor()
   at IM_CMETracking.ReportViewer.CrystalReportViewer1_Load(Object sender, EventArgs e)
   at System.Windows.Forms.UserControl.OnLoad(EventArgs e)
   at CrystalDecisions.Windows.Forms.CrystalReportViewer.OnCreateControl()
   at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
   at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
   at System.Windows.Forms.Control.CreateControl()
   at System.Windows.Forms.Control.WmShowWindow(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   at System.Windows.Forms.Form.WmShowWindow(Message& m)
   at System.Windows.Forms.Form.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
The second client is running XP. The error I'm getting on their machine is this:
     CrystalDecisions.Shared.CrystalReportsException: Load report failed. ---> System.Runtime.InteropServices.COMException:    Unsupported Operation. A document processed by the JRC engine cannot be opened in the C++ stack.
Thank you for your help.

How do I resolve error 1310 while installing crystal report version for visual studio 2010.

How do I resolve error 1310. I try to install crystal version for visual studio 2010, but I got this error message. Error 1310. Error writing to file. mcf80.dll.verify that you have access to that directory. My pc is window 7 (32 bit). Please I need help
urgently to work with this program in my system successfully. Please help.

Hello Dorohidea,
Do you mean that when you install crystal report in virtual studio 2010, you receive the error message about error 1310?
Please take a look at the following KB.
Support for Crystal Reports for Visual Studio
https://support.microsoft.com/kb/317789/en-us
In Visual Studio 2010, to create a Crystal Reports project or Web site or to import existing projects or Web sites that were created by using older versions of Visual Studio or Crystal Reports, you must first install a version of Crystal Reports that is
compatible with Visual Studio 2010.
For more information about how to use Crystal Reports in Visual Studio 2010, visit the following SAP Crystal Reports website:
http://www.sap.com/crystalreports/vs2010
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Error in upgrade Crystal Reports for Visual Studio 2010 to SP1

During the installation of SP1 of Crystal Reports for Visual Studio 2010 (RTM was already installed) I got an error message saying:
Error 2753. The file "agent.exe.6ED28686_7B19_420C_B255_5B6C1BD2C705" is not marked for installation.
After a rerun of the setup program (choosing reinstall) the message did not re-appear.
It happens on Windows 7 x64 with Visual Studio 2010 SP1
Is this a bug in the installation or an "undocumented feature"?
Regards,
Adri

Hi Adri,
I had that error once and one other poster also had it. Like you I just re-installed and no error on the second round.
I believe it was some Windows Process had the file locked for some reason. It's not a bug or "undocumented feature" it's a Windows OS thingy....
Before uninstalling anything it may be a recommendation to reboot first and not load anything that may be locking dependencies.
How many times have you seen this?
Thank you
Don

Javascript - Object required error for visual studio 2010

Hi - I have downloaded the crystal report RTM for visual studio 2010.
My App server is windows 2008.
We are using crystal reports as part of CRM application
I am getting javascript error 'Object Required' at the following line:
The debugger after the error message refers to this:
bobj.crv.stateManager.setComponentState('ctl00_ContentPlaceHolder2_CrystalReportViewer1__UI',eval('('document.getElementById('__CRYSTALSTATEctl00$ContentPlaceHolder2$CrystalReportViewer1').value')'));
The website has all the required aspnet_client files and have made sure the application is able to load them.
When tried with a new sample solution the reports work.
Please help. I need to make the crystal reports work with the CRM solution...

I am assuming this is happening after you have deployed your app and that the app works as expected on your development computer(?). Please confirm...
I need you to tell me the following:
1) how was the app compiled; any cpu, 32 bit, 64 bit?
2) how was the CR runtime deployed (what MSI / MSM did you use?)?
3) if this app is installed under custom app pool see the following:
Deploy the CrystalReportViewers13 virtual directory as a sub-directory of your application.
Copy the Crystalreportviewers13 folder to be a sub-folder at the root of your application. You can configure where your application looks for this folder by using the following Help file [SAP Crystal Reports .NET SDK Developer Guide
|http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_dg_2010_en.zip] and search the document for ("web.config";). In the section "Configuring your web.config file" follow the instructions specified for setting the resourceURI attribute. This way you can control updates to the viewers when deploying your application.
Note the resourceURI value is the name of the viewers directory and should be preceded with a Tilde
ie value="~/crystalreportviewers13"
Also, have a look at the following two articles. Both are pre CRVS2010, however the ideas re. deploying to a custom app pool still apply. All that changes is the folder name.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

DirectMusic in Visual Studio 2010 on a 64 bit Windows 7

I Have a Visual Studio 2010 VB programme using DirectX 11 DirectMusic, for playing MIDI audio files which I created on a Windows XP 32 bit machine, I have now moved it to a Windows 7 64 bit machine. The programme does run OK but the problem I have
though is it takes at least 2 minutes to load. It loads straight away on the XP 32 bit machine. In debug stepping through it is the get port information of the output port that is delaying it, code below
Do
dwPortCount = dwPortCount + 1
COutPort.GetPortInfo(dwPortCount, PortInfo)
Loop While 0 = (PortInfo.dwFlags And DMUS_PC.SOFTWARESYNTH)
'Debug.WriteLine("Selected output port: {0}", PortInfo.szPortDescription)
COutPort.SetPortParams(0, 0, 0, [SET].REVERB Or [SET].CHORUS, 44100)
COutPort.ActivatePort(PortInfo)
It goes through this loop three times and each time it stops at the line "COutPort.GetPortInfo(dwPortCount, PortInfo)" for quite a while, or the third time after a wait it does continue and loads the form.
Any Ideas how to sort this problem?
David

Hi Dave-OLW,
As your issue is related to DirectX 11, We have a specilized forum for disscussing the problems about DirectX 11:http://xboxforums.create.msdn.com/forums/76.aspx
You could post it in the forum for better supports, Thanks.
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I am having trouble in installing Visual Studio 2010 Ultimate on Windows 7 SP1 x64

Hi
I am trying to Install VS2010 Ultimate on Windows 7 X64 SP1 Specifically SP1 because before it I am using Windows 7 x64 and VS2010 Ultimate working there excellently. When I try to install it says the Setup file is incompatible with your Windows version
I am surprised by this please reply me as soon as possible
Thanks in Advance
Arpit

Hi Arpit,
Welcome to the MSDN Forum.
As far as I know, Visual Studio 2010 is compatible with Windows 7 SP1. I think this issue might related with the Visual Studio install media. I recommand you download Visual Studio 2010 Ultimate from
this link, and follow the steps below to install it:
Before install Visual Studio, please finish the steps below first:
Turn off your anti-virus/antispyware software during installation;
Install the latest Windows updates from the Windows Update site:
http://update.microsoft.com;
Complete or dismiss Windows Update before installation. (And don't forget to turn it on later);
Clean your %temp% folder (Start Menu >> Run >> Type "%temp% >> OK);
Run the setup with Administrator privilege: right-click the installer -> Run as administrator
If the installation still failed, please collect the installation log files from "%temp%" folder with the
Log Collection Tool.
Send the vslogs.cab file in the %temp% folder to me for further analyze(E-mail: v-anwu_at_microsoft_dot_com). Note: Please attach the link of this post in the mail.
If you have any concerns, please feel free to let me know.
Best Regards,
Andrew Wu [MSFT]
MSDN Community Support | Feedback to us
Get or Request Code Sample from Microsoft
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

I installed visual studio 2010 in my windows 8.1 system.during the installation sql server 2008 r2 features were installed.so which version of sql server i need to install(2008 or 2008 r2)?

hi,
I installed visual studio 2010 in my windows 8.1 system.during the installation sql server 2008 r2 features were installed.so which version of sql server i need to install(2008 or 2008 r2)?
regards,
harsha.

My guess is SQL Server 2008 R2.
Check the following KB article for details:
http://support.microsoft.com/kb/2681562
Kalman Toth Database & OLAP Architect
SELECT Video Tutorials 4 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Crystal Reports for Visual Studio 2010 - JavaScript error on IE

Hi,
A few months ago we migrated our projects to Visual Studio 2010 and started using CR for VS2010 beta. We've installed our ASP.Net application several times using the beta version and now that you released the final version of CR for VS2010, we updated the Crystal Reports runtime of the production server (after removing the beta version).
We installed the 32Bit version and our application is configured to use ASP.Net 2.0/.Net Framework 3.5 and the Application Pool in IIS 7.5 is in Classic Mode.
The error happens only in IE 8 and 9 beta (not tested on prior versions of IE).
This is the error message:
SCRIPT438: Object doesn't support this property or method allInOne.js, line 10 character 216668

Couple of things that bother me here:
1) Installing a Beta product on a production server(?)
2) Uninstall of Beta
Re. (1), water under a bridge I suppose...
Re. (2). My testing of the Beta uninstall indicates that it is not clean with a number of folders, reg entries, etc., left behind. I would thus suggest the following;
1) Uninstall the CRVS2010 RTM runtime
2) In file explorer, look for SAP BusinessObjects folder under c:\program files(x86) and delete it (and it's subfolders).
3) In the registry, look under HKLM\Software and remove SAP BusinessObjects.
4) Do the same under HKCU
5) Install the CRVS2010 runtime.
MSI:
http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_redist_install_32bit_13_0.zip
MSM:
http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_mergemodules_13_0.zip
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Connectiong Visual Studio 2010/2013 to SQL Database and Running VS Windows Form App in the Windows Azure Cloud

Hi, good day
Im going to have a little presentation before I finished my OJT and the topic that was given to is cloud computing. One of the task I need to do is to set up an application where in it can run and access real time on the "cloud". Now my prob is
I already have windows azure account, made my database, BUT don't know how to connect it to my Visual Studio 2010/2013 (which is more preferable?), and if I ever connect it when my Windows Form is made can it run on the cloud also, how? Please help. Thank
you so much.
PS: I will be discussing this with people who doesn't know much about computing can you send me tips what to discuss? Double Thank You. :)

Thank you for the help.. Another thing can I run my Windows Form App also on the cloud? Like if I present is it possible that the application that I will be doing can be uploaded and accessed on the cloud by the audience and can be used by many at the
same time? Can you tell me how? Or give me a source how to do it? I downloaded the azure tools but I don't how to use it. I checked and tried activating and fixing my IIS and enabling support for ASP but still nothing, when I try to do cloudservice it says
"get azure tools" even though I already have it installed in my laptop, and when I try to right click and upload the project to azure I don't see the usual option 'Upload to Microsoft Azure'. My app is a simple phonebook app with add, edit, delete and search
function. Thanks again..

Deploing a BDC Model project to SharePoint Foundation 2010 usinging Visual Studio 2010

Hello,
I am tring to deploy external content type to Sharepoint 2010 foundation using Visual studio 2010 and I followed this:
http://blogs.msdn.com/b/vssharepointtoolsblog/archive/2010/04/02/deploy-a-bdc-model-project-to-sharepoint-foundation-2010-using-visual-studio-2010.aspx
after completing procedure I have tried do deploy solution but I always get this exception:
Error 1 Error occurred in deployment step 'Add Solution': Access denied by Business Data Connectivity.
    Error was encountered at or just before Line: '0' and Position: '0'.
  0 0 BdcModelProjectTest
I have tried to grant myself permissions in Sharepoint central administration (
http://blogs.msdn.com/b/ericwhite/archive/2010/06/11/access-denied-by-business-data-connectivity.aspx ) but when I click ok I get this exception
No windows identity for damain\username. 0a193cf4-3811-4aa8-a657-0de3b8be3793
07/04/2011 16:46:46.31 w3wp.exe (0x0828)                       0x1414 Business Connectivity Services Business Data
g0k9 High    Access Denied for User '0#.w|damain\username, which may be an impersonation by damain\username
I am really hopeless, can anyone help?

Hi,
It seems that an account are you using to deploy solution doesn't have sufficient permission in the BDC Metadata Store. In order to assign permission you should open Central Administration->Application Management->Manage Service Application->Business
Data Connectivity Service->Click Set Metada Store Permission on the ribbon->Set Permission you need and tick the checkbox "Propagate permission to all..."
Dmitry
Lightning
Tools Check out our SharePoint tools and web parts

Crystal Report 13 Visual Studio 2010 SQL Server 2008 R2 ODBC Problem

Hi Everybody,
I am new in Crystal Report.
I developed a web application in Visual Studio 2010, and my Database is SQL Server 2008 R2.
I created reports using Crystal Report 13 in Visual Studio and my Operating System is Windows 7 32-Bit.
I used ODBC Connection System DNS for my application.
It is running fine even after Hosting on my local PC.
But it creates problem when hosted on my Team Leader PC and Test Server.
Their Configurations are same but only difference is "SQL Server 2008" Not R2
The Error I am getting is "Failed to open the connection".
When I Host the same on my another team member PC, I am getting the error like
"Failed to open the connection. Details: [Database Vendor Code: 4060 ] Database Connector Error: ' [Database Vendor Code: 4060 ]' Failed to open the connection. Failed to open the connection. TestVr {CE268132-D2BD-43EC-BE45-0BCD847FBCDA}.rpt Details: [Database Vendor Code: 4060 ]"
I tried various solution to fix this bug.
But i am unable to do this and not getting any idea to fix this issue.
If anyone can guide I will be thankful to him.
All suggestions are appreciable.
Thank you

Hi,
Please use the top right search box. for ex below search which will return many useful kb's, articlea and forum threads where simillar issues are discussed.
[http://www.sdn.sap.com/irj/scn/advancedsearch?query=failedtoopentheconnection|http://www.sdn.sap.com/irj/scn/advancedsearch?query=failedtoopentheconnection]
Most probably the issue is missing database client driver / provider.
Install the driver used to connect the rpt to the db on the server and then create a 32 bit DSN with the same name as the dev machine..
Hope this helps,
Bhushan.

Error LNK1123 on Windows 7 Visual Studio 2010

Similar Messages

Maybe you are looking for