Facing issue in batch file

Hi All,
We have created a batch job for data loading.
usually when data load starts will get mail saying data laod is started and once it finish it will send ended mail.
now we had run dataload with allocation it ran for 2 and half an hour after that time am not getting dataload ended mail.
i have checked script i have check log file but am not understanding what could the issue can any one help me how to trace.
Thanks in advance
SM

Hi thanks for your reply, actually my issue with mail only
so can you help in finding the folder of (SMTP) server Queue folder. so that i can check what is the issue.
SM

Similar Messages

Facing problem in SFTP File Transfer in OSB 11gR1

Hi,
We are facing issue in SFTP File transfer from a very long time now.
We have created around 10 SFTP Services which are configured to transfer files from One server to another in the entire application setup.
Each SFTP Service consists of a Proxy service of SFTP type, which calls Biz Service and transfers files in default pattern.
These services were running successfully from a long time, but from past 2-3 months, files are not getting transferred to target folder everytime.
i.e. After restarting managed server, they get transfered for few days, but start giving problem after some time.
I have checked full configuration settings, file paths, also i have checked file names to trace duplicacies if any, but there is no such possibility of passing duplicate files as file names consists of timestamps.
We have a clustered domain setup with 2 managed servers configured running in 2 instances.
The observations in case of error while passing file are as follows :
1. A file named abc.xyz is kept in Source Directory.
2. abc.xyz gets converted to abc.xyz%.stage file in some time.
3. It does not move to archive directory nor to target directory.
All servers are up as it is PROD Environment and hence no server issue.
While testing same services in SIT Servers, we never face any issue.
Proxy Service configuration is as below :
Authentication Mode      Username Password
Service Account      *****NOT TO BE DISCLOSED*****
Timeout      60
File Mask      [*.*]
Scan SubDirectories      false
Pass By Reference      false
Remote Streaming      true
Post Read Action      archive
Archive Directory      *****NOT TO BE DISCLOSED*****
Error Directory      *****NOT TO BE DISCLOSED*****
Retry Count      5
Managed Server      *****ONE OF THE MANAGED SERVERS*****
Polling Interval      900
Read Limit      0
Sort By Arrival      false
Request encoding      utf-8
We have mentioned different polling intervals for different services. Values used are : 450, 900, 1800, etc.
Please guide for solution of this problem ASAP.
Thanks
Cheena Malhotra
Edited by: cmalhotra on Jan 20, 2013 12:36 PM

(a) This doesn't appear to have anything to do with the topic of this forum.
(b) If this fails:
getFtpClient().changeWorkingDirectory(getRemoteDirectory()); //This line first returning false then of course nothing else will work. That's what you need to investigate.

I am facing issue when opening flash files in Flash CC. (error:- This file was created with a later release of Flash Professional and might contain new features that would be lost when saved in the current format.)

I am facing issue when opening flash files in Flash CC. (error:- This file was created with a later release of Flash Professional and might contain new features that would be lost when saved in the current format.)

Wow. Okay...
I'll let the real veterans in this forum tackle your issues one after the other. But, I can tell you, all will be well.
My only comment would be re: your computer specs:
BJReis wrote:
. This may be due to somewhat older equipment:
GHz Intel Core Duo MacBook Pro with a 4GB memory computer with Ddr3 running OSX 10.8.4
To be completely honest, FCPX is a RAM hog. It just is. But, RAM is relatively cheap, and the pay-off is good.
4GB is right on the edge, IMHO. 16G is ideal.
I wish you luck, hang in there, and standby for more help.

I am facing issue when opening flash files in Flash CC. (Error : - .fla was created with a later version of Adobe Flash Professional CC and might contain new features not supported in this version of Flash professional.)

I am facing issue when opening flash files in Flash CC. (Error : - .fla was created with a later version of Adobe Flash Professional CC and might contain new features not supported in this version of Flash professional.)

fyfesa1970 wrote:
Ask a simple question and get a simple answer...see below...hilarious:
All representatives are actively assisting other customers. Your estimated wait time is 0 minute(s) and 1 second(s) or longer. Thank you for your patience.
We all can learn from this. Whenever you get stuck in a customer-service situation that goes nowhere, as soon as you become aware of the futility, get the name and employee ID of the person, then say, "I don't mean to be rude, I think we're both wasting our time. Perhaps you weren't trained for this issue, or perhaps your system isn't displaying the correct information. It doesn't matter, because I'm not getting proper customer support this way. Please ESCALATE this to your highest-level manager IMMEDIATELY. If that person isn't availabe, ESCALATE me to that person's highest-level manager. If you haven't been given the proper training, you can use this to inform your manager that you need the training. Thanks for trying to help. I appreciate it. I have copied and saved this chat session. NOW PLEASE ESCALATE THIS CASE AS I HAVE REQUESTED ABOVE. I'm waiting now... "
The point is that you're a customer, and the company needs customers, so the individual who's failing to deliver good service needs to be identified so they can be properly trained, and so that problems in the system can also be identified, but more important is that you get the service you're entitled to.
If you search the forum for similar questions, you'll see the kind of information that the volunteer users like yourself on the forum need to know about your system and files involved, so they can help you better.
Good luck.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Java and Batch File Issue - need urgent help

I have a java program which calls a batch file. This batch file calls another java program. I want an option so that I can close this java program from main program.
If i try process.destroy then it will call batch file and not java program.
I can't go away with batch file.
I will appreciate if someone can help me.

khannap wrote:
Hi, Thanks for the help but this doesn't seem solving my problem completely. I will appreciate if you can help more.
I will explain you the scenario -
1. There is java program provided as an external program to me.Only changes things slightly.
2. This java program is called using batch file. When batch file is started this java program starts and listens on a socket for incoming data.I would want to wrap the launch of this java program in another JVM so we can use process.destroy().
3. I am writing a program to check performance of the above java program. I want to call this java program from my program in a loop having some varying config data. When I run the loop first time I create a batch file at run time which executes the batch file provided by vendor. This batch file starts the socket. Once my message list is over then my loop goes to executing the batch file again with different config parameters. But this time I run into issue because my previous java program is not killed after message sending was over.Would it be acceptable to mung the 3rd party batch file to insert a wrapper JVM?
Even if i use threads I don't think I can get rid of batch file.I did not suggest getting rid of batch files.
So, I need to find a way so that when any iteration of loop is over then this socket program is killed. These 3rd party java programs - do they not have a "terminate" command you can put at the end of your message list?
Even if i closed the socket from my client program that doesn't help because server is still listening and waiting for new client.
I need to kill server which was started by batch file.On Linux it would be fairly simple to modify your batch file to determine what the process id is and send the process a signal to terminate it.
Not sure what you can do on Windows.

Windows batch file issue for Dbf to csv

Hello,
I am in a tough situation.I need to create a batch file in windows to convert .dbf file to .csv.
i am using below code for doing this .
dbf_2_ora.bat.....
f:
cd \Retail_Work\DATA_201\test
copy C_N_DETL.DBF C_N_DETL_TEST.csv
when I am running above bat file "C_N_DETL_TEST.csv" is creating but when I am opening this file data is separated by "tab".
kindly help me to create a csv file from dbf file withput spaces/tab/whitespaces.
hel[p me

IMPORT DATA is a server side command (just as the documentation tells you)
The SAP HANA server cannot access your workstation or the folders on it.
This (and a lot more around data import/export) has been discussed a lot here in SCN already.
A little research effort would have clarified this.
- Lars

Guide to External Jobs on 10g with dbms_scheduler e.g. scripts,batch files

GUIDE TO RUNNING EXTERNAL JOBS ON 10g WITH DBMS_SCHEDULER
NOTE: Users using 11g should use the new method of specifying a credential which eliminates many of the issues mentioned in this note.
This guide covers several common questions and problems encountered when using
dbms_scheduler to run external jobs, either on Windows or on UNIX.
What operating system (OS) user does the job run as ?
External jobs which have a credential (available in 11g) run as the user
specified in the credential. But for jobs without credentials including
all jobs in 10gR1 and 10gR2 there are several cases.
- On UNIX systems, in releases including and after 10.2.0.2 there is a file $ORACLE_HOME/rdbms/admin/externaljob.ora . All external jobs not in the SYS schema and with no credential run as the user and group specified in this file. This should be nobody:nobody by default.
- On UNIX systems, in releases prior to 10.2.0.2 there was no "externaljob.ora" file. In this case all external jobs not in the SYS schema and with no credential run as the owner and group of the $ORACLE_HOME/bin/extjob file which should be setuid and setgid. By default extjob is owned by nobody:nobody except for oracle-xe where it is owned by oracle:oraclegroup and is not setuid/setgid.
- On Windows, external jobs not in the SYS schema and with no credential run as the user that the OracleJobScheduler Windows service runs as. This service must be started before these jobs can run.
- In all releases on both Windows and UNIX systems, external jobs in the SYS schema without a credential run as the oracle user.
What errors are reported in SCHEDULERJOB_RUN_DETAILS views ?
If a job fails, the first place to look for diagnostic information is the SCHEDULERJOB_RUN_DETAILS set of views. In 10gR2 and up the first 200 characters of the standard error stream is included in the additional_info column.
In all releases, the error number returned by the job is converted into a
system error message (e.g. errno.h on UNIX or net helpmsg on Windows) and that
system error message is recorded in the additional info column. If there is no
corresponding message the number is displayed.
In 11g and up the error number returned by the job is additionally recorded in
the error# column. In earlier releases 27369 would always be recorded in the
error# column.
Generic Issues Applicable to UNIX and Windows
- The job action (script or executable) must return 0 or the job run will be marked as failed.
- Always use the full pathname to executables and scripts.
- Do not count on environment variables being set in your job. Make sure that the script or executable that your jobs runs sets all required environment variables including ORACLE_HOME, ORACLE_SID, PATH etc.
- It is not recommended to pass in a complete command line including arguments as the action. Instead it is recommended to pass in only the path to and name of the executable and to pass in arguments as job argument values.
- Scripts with special characters in the execution path or script name may give problems.
- Ensure that the OS user your job runs as has the required privileges/permissions to run your job. See above for how to tell who the job runs as.
- External job actions cannot contain redirection operators e.g. > < >> | && ||
- In general try getting a simple external job working first e.g. /bin/echo or ipconfig.exe on Windows. Also try running the job action directly from the commandline as the OS user that the job will run as.
Windows-specific Issues
- The OracleJobScheduler Windows service must be started before external jobs will run (except for jobs in the SYS schema and jobs with credentials).
- The user that the OracleJobScheduler Windows service runs as must have the "Log on as batch job" Windows privilege.
- A batch file (ending in .bat) cannot be called directly by the Scheduler. Instead cmd.exe must be used and the name of the batch file passed in as an argument. For example
begin
dbms_scheduler.create_job('myjob',
   job_action=>'C:\WINDOWS\SYSTEM32\CMD.EXE',
   number_of_arguments=>3,
   job_type=>'executable', enabled=>false);
dbms_scheduler.set_job_argument_value('myjob',1,'/q');
dbms_scheduler.set_job_argument_value('myjob',2,'/c');
dbms_scheduler.set_job_argument_value('myjob',3,'c:\temp\test.bat');
dbms_scheduler.enable('myjob');
end;
/- In 10gR1 external jobs that wrote to standard output or standard error streams would sometimes return errors. Redirect to files or suppress all output and error messages when using 10gR1 to run external jobs.
UNIX-specific Issues
- When running scripts, make sure that the executable bit is set.
- When running scripts directly, make sure that the first line of the script in a valid shebang line - starting with "#!" and containing the interpreter for the script.
- In release 10.2.0.1, jobs creating a large amount of standard error text may hang when running (this was fixed in the first 10.2.0.2 patchset). If you are seeing this issue, redirect standard error to a file in your job. This issue has been seen when running the expdp utility which may produce large amounts of standard error text.
- the user that the job runs as (see above section) must have execute access on $ORACLE_HOME/bin and all parent directories. If this is not the case the job may be reported as failed or hang in a running state. For example if your $ORACLE_HOME is /opt/oracle/db then you would have to make sure that
chmod a+rx /opt
chmod a+rx /opt/oracle
chmod a+rx /opt/oracle/db
chmod a+rx /opt/oracle/db/bin
- On oracle-xe, the primary group of your oracle user (if it exists) must be dba before you install oracle-xe for external jobs to work. If you have an oracle user from a regular Oracle installation it may have the primary group set to oinstall.
- On oracle-xe, the extjobo executable is missing so external jobs in the SYS schema will not work properly. This can be fixed by copying the extjob executable to extjobo in the same directory ($ORACLE_HOME/bin).
- Check that correct permissions are set for external job files - extjob and externaljob.ora (see below)
Correct permissions for extjob and externaljob.ora on UNIX
There is some confusion as to what correct permissions are for external job related files.
In 10gR1 and 10.2.0.1 :
- rdbms/admin/externaljob.ora should not exist
- bin/extjob should be setuid and setgid 6550 (r-sr-s---). It should be owned by the user that jobs should run as and by the group that jobs should run as.
- bin/extjobo should have normal 755 (rwxr-xr-x) permissions and be owned by oracle:oraclegroup
In 10.2.0.2 and higher
- rdbms/admin/externaljob.ora file must must be owned by root:oraclegroup and be writable only by the owner i.e. 644 (rw-r--r--) It must contain at least two lines: one specifying the run-user and one specifying the run-group.
- bin/extjob file must be also owned by root:oraclegroup but must be setuid i.e. 4750 (-rwsr-x---)
- bin/extjobo should have normal 755 (rwxr-xr-x) permissions and be owned by oracle:oraclegroup
In 11g and higher
Same as 10.2.0.2 but additionally bin/jssu should exist with root setuid
permissions i.e. owned by root:oraclegroup with 4750 (-rwsr-x---)
Internal Error numbers for UNIX on 10.2.0.2 or 10.1.0.6 or higher
If you are not using a credential and are using version 10.2.0.2 or higher or 10.1.0.6 or higher you may come across an internal error number. Here are the meanings for the internal error numbers.
274661 - can't get owner of or permissions of externaljob.ora file
274662 - not running as root or externaljob.ora file is writable by group or other or externaljob.ora file not owned by root (can't switch user)
274663 - setting the group or effective group failed
274664 - setting the user or effective user failed
274665 - a user or group id was not changed successfully
274666 - cannot access or open externaljob.ora file
274667 - invalid run_user specified in externaljob.ora file
274668 - invalid run_group specified in externaljob.ora file
274669 - error parsing externaljob.ora file
274670 - extjobo is running as root user or group

Hi Ravi,
Can you help me...
Hi All,
I planned to create a job to do rman backup daily at 04:00 AM.
1. I created a program as follows
BEGIN
DBMS_SCHEDULER.CREATE_PROGRAM(
program_name => 'rman_backup_prg',
program_action => '/u02/rmanback/rman.sh',
program_type => 'EXECUTABLE',
comments => 'RMAN BACKUP');
END;
my rman script is
#!/usr/bin/ksh
export ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1
export PATH=$PATH:/u01/app/oracle/product/10.2.0/db_1/bin
/u01/app/oracle/product/10.2.0/db_1/bin/exp rman/cat@catdb file=/u02/rmanback/rm
an_220108.dmp log=/u02/rmanback/rman_220108.log owner=rman statistics=none comp
ress=n buffer=400000
compress *.dmp
exit
2. I created a schedule as follows
BEGIN
DBMS_SCHEDULER.CREATE_SCHEDULE(
schedule_name => 'rman_backup_schedule',
start_date => SYSTIMESTAMP,
end_date => '31-DEC-16 05.00.00 AM',
repeat_interval => 'FREQ=DAILY; BYHOUR=4',
comments => 'Every day at 4 am');
END;
3. I created ajob as follows.
BEGIN
DBMS_SCHEDULER.CREATE_JOB (
job_name => 'rman_backup_job',
program_name => 'rman_backup_prg',
schedule_name => 'rman_backup_schedule',
enabled=> true,
auto_drop=> false
END;
While I am running the job I am getting the following error anybody help me.
ORA-27369: job of type EXECUTABLE failed with exit code: Not owner
ORA-06512: at "SYS.DBMS_ISCHED", line 150
ORA-06512: at "SYS.DBMS_SCHEDULER", line 441
ORA-06512: at line 2
If I removed "compress *.dmp" line in rman script it is working fine.
/* additional Info from dba_scheduler_job_run_details as follows */
ORA-27369: job of type EXECUTABLE failed with exit code: Not owner
STANDARD_ERROR="
Export: Release 10.2.0.3.0 - Production on Tue Jan 22 14:30:08 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Release 10.2.0.3.0 - Production
Export"
Regards,
Kiran

Executing batch file from Java stored procedure hang

Dears,
I'm using the following code to execute batch file from Java Stored procedure, which is working fine from Java IDE JDeveloper 10.1.3.4.
public static String runFile(String drive)
String result = "";
String content = "echo off\n" + "vol " + drive + ": | find /i \"Serial Number is\"";
try {
File directory = new File(drive + ":");
File file = File.createTempFile("bb1", ".bat", directory);
file.deleteOnExit();
FileWriter fw = new java.io.FileWriter(file);
fw.write(content);
fw.close();
// The next line is the command causing the problem
Process p = Runtime.getRuntime().exec("cmd.exe /c " + file.getPath());
BufferedReader input = new BufferedReader(new InputStreamReader(p.getInputStream()));
String line;
while ((line = input.readLine()) != null)
result += line;
input.close();
file.delete();
result = result.substring( result.lastIndexOf( ' ' )).trim();
} catch (Exception e) {
e.printStackTrace();
result = e.getClass().getName() + " : " + e.getMessage();
return result;
The above code is used in getting the volume of a drive on windows, something like "80EC-C230"
I gave the SYSTEM schema the required privilege to execute the code.
EXEC DBMS_JAVA.grant_permission('SYSTEM', 'java.io.FilePermission', '<<ALL FILES>>', 'read ,write, execute, delete');
EXEC DBMS_JAVA.grant_permission('SYSTEM', 'SYS:java.lang.RuntimePermission', 'writeFileDescriptor', '');
EXEC DBMS_JAVA.grant_permission('SYSTEM', 'SYS:java.lang.RuntimePermission', 'readFileDescriptor', '');
GRANT JAVAUSERPRIV TO SYSTEM;
I have used the following to load the class in Oracle 9ir2 DB:
loadjava -u [system/******@orcl|mailto:system/******@orcl] -v -resolve C:\Server\src\net\dev\Util.java
CREATE FUNCTION A1(drive IN VARCHAR2) RETURN VARCHAR2 AS LANGUAGE JAVA NAME 'net.dev.Util.a1(java.lang.String) return java.lang.String';
variable serial1 varchar2(1000);
call A1( 'C' ) into :serial1;
The problem that it hangs when I execute the call to the function (I have indicated the line causing the problem in a comment in the code).
I have seen similar problems on other forums, but no solution posted
[http://oracle.ittoolbox.com/groups/technical-functional/oracle-jdeveloper-l/run-an-exe-file-using-oracle-database-trigger-1567662]
I have posted this in JDeveloper forum ([t-853821]) but suggested to post for forum in DB.
Can anyne help?

Dear Peter,
You are totally right, I got this as mistake copy paste. I'm just having a Java utility for running external files outside Oracle DB, this is the method runFile()
I'm passing it the content of script and names of file to be created on the fly and executed then deleted, sorry for the mistake in creating caller function.
The main point, how I claim that the line in code where creating external process is the problem. I have tried the code with commenting this line and it was working ok, I made this to make sure of the permission required that I need to give to the schema passing security permission problems.
The function script is running perfect if I'm executing vbs script outside Oracle using something like "cscript //NoLogo aaa1.vbs", but when I use the command line the call just never returns to me "cmd.exe /c bb1.bat".
where content of bb1.bat as follows:
echo off
vol C: | find /i "Serial Number is"
The above batch file just get the serial number of hard drive assigned when windows formatted HD.
Same code runs outside Oracle just fine, but inside Oracle doesn't return if I exectued the following:
variable serial1 varchar2(1000);
call A1( 'C' ) into :serial1;
Never returns
Thanks for tracing teh issue to that details ;) hope you coul help.

DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER Error while running multiple instances of SSIS through batch files.

I have an SSIS package which loads data from an Excel file into a SQL Database. This SSIS package is triggered by a batch file.
As part of a load test, I have created 20 batch files that run the same package for a different Excel file.
To have these batch files run together, I have created 2 master batch files, one to run them sequentially (using CALL) and the to run them parallely (using START). I do have any issues in both of them.
But when I try to run 5 instances of the same batch file run concurrently (using START XYZ.bat 5 times) only 1 succeeds. CALL XYZ.bat 5 times has no issues.
Is it because during START, the Excel file is opened by 1 batch file and unavailable to the other 4 instances? If yes, then why doesn't SSIS throw an error when I run the package through BIDS keeping the Excel file opened? Is there something I can do to
overcome a FAILURE?
Nelton D'Souza MS BI Developer

Yes, it seems that since you open the same file from multiple processes the error occurs due to the sharing violation.
I guess you will get the error opening several Excel files from BIDS trying to read / write to it if you have two BIDS so it is consistent. Excel disallows multiple access paths by its design.
Arthur My Blog

Issue in moving files from data fodler to processed folder in background

Hi All,
I am facing one issue in moving files from data fodler to processed folder in case of background execution.
When i am executing the file in the foreground, i can move the file from Data folder to processed folder. I am using SXPG_COMMAND_EXECUTE FM to move the file from data folder to processed folder. I can see the file in processed folder once the program is executed.
But in case of executing the same program in background, it is giving me the error "Failed to move the file to processed folder" in the spool of SM37 and i can see the file still laying in data folder.
I tried to check other programs which acesses the same folder as the above program, whether they are able to move. They are able to move the file to processed fodler successfully both in foreground and background mode.
Please help me in resolving this issue.
Thanks,
Deepa

Hi Sanu,
Please use teh following code to move the file from source to target folder.
This is a code showing how to create and use COPY command of UNIX in ABAP
PARAMETERS:
Input file path
p_input TYPE localfile,
Processed file path
p_proc TYPE localfile.
Declare the Types to file data
TYPES: BEGIN OF L_X_OUTPUT,
sys(200), " Please note, there are asterisk before and after sys (i.e.sys)
END OF L_X_OUTPUT.
* Internal table to store file data
DATA l_i_output TYPE STANDARD TABLE OF l_x_output WITH HEADER LINE.
* Variable for the UNIX command
DATA: l_v_unix_comm(255) TYPE c.
Copy command of UNIX
CONCATENATE 'mv' p_input p_proc
INTO l_v_unix_comm SEPARATED BY space.
For example the Copy command is stored as below
cp u2018/data/interfaces/input/input_fileu2019 u2018/data/interfaces/processed/processed_fileu2019
Examples of UNIX Command *u2022 mv filename1 filename2 --- moves a file (i.e. gives it a different name, or moves it into a *different directory (see below) *u2022 cp filename1 filename2 --- copies a file
Execute the UNIX Copy command.
This command will copy the file from input file path to the processed file path
CALL 'SYSTEM' ID 'COMMAND' FIELD l_v_unix_comm
ID 'TAB'
FIELD l_i_output-sys.
IF sy-subrc eq 0.
write: 'File is copied successfully using UNIX command in ABAP'.
ENDIF.

Issue in Uploading file to application server

Hi folks,
I need to transfer data to excel file on application server but i am facing issues while doing so.
I am working on ECC6.0 system.
I am trying with this code and it giving dump error on transfer command.
w_file = '/usr/data/020//varun.xls'.
OPEN DATASET w_file for input in text mode encoding non-unicode.
LOOP AT T_MARD.
TRANSFER string to w_file.
endloop.
CLOSE DATASET w_file.
Please help.
Is there any other way to do so please let me know

Hi Got the solution :-
If the data to be transferred is having all characters then we can use this:-
OPEN DATASET w_file for output in text mode encoding non-unicode.
if sy-subrc eq 0.
   LOOP AT T_MARD into wa_mard.
        TRANSFER wa_mard to w_file.
   endloop.
endif.
CLOSE DATASET w_file.
If all the data is not in char then - declare a char strinf of the table length.
Data: loc_string(300) type c.
OPEN DATASET w_file for output in text mode encoding non-unicode.
if sy-subrc eq 0.
   LOOP AT T_MARD into wa_mard.
      CALL FUNCTION 'HR_99S_COPY_STRUC1_STRUC2'
        EXPORTING
          p_struct1 = wa_mard
        IMPORTING
          p_struct2 = loc_string.
        TRANSFER loc_string to w_file.
   endloop.
endif.
CLOSE DATASET w_file.
Thanks for the help

Executing batch file using SM49 Tcode

Hi,
Theirs a batch file which is used to encrypt a text file ie from '.txt' to '.enc'.
Seperate Encryption software and Java Pakage is used.
When in SM49 the operating system command is executed,its throwing error
File Not Found Exception.
ie call failed
Java.io.filenotfoundexception : ..\logs\star_pkcs7-client-events.log(The system cannot find the path specified)
OS is WinNt,File is encrypting at OS level seperately.
All authorisation issue has been taken care of.
If any questions or need information then plz ask
Help me on this...its urgent

hi,
well try the following
String cmdLine[] = {"cmd.exe","/c","copy.bat"}; Runtime.getRuntime().exec(cmdLine);it works fine in Win NT, the process terminates normally.
cheerz
ynkrish

Why are my edited pictures from bridge not saving when I automate batch files through PS?

When I edit my photos through adobe bridge (open camera raw, make adjustments to 1 picture), then automate (batch) my file folder in PS, the edits I have made don't save. Example, I crop an image & lighten it, I can view the adjusted image in bridge & camera raw, but when I batch my photos the editing I have done is gone.

Raw files need to be opened and saved before the adjustments are applied. I have no clue what your "batch save" does.
A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

We are facing issue to open a static form PDF in Chrome Browser , which is loaded using Adobe FormService.Able to open in other browsers but not able to open the static forms in chrome with LC 11.0 version

We are facing issue to open a static form PDF in Chrome Browser
, which is loaded using Adobe FormService.
Able to open in other browsers but not able to open the static
forms in chrome with LC 11.0 version
Below error message:
The document you are trying to load
requires Adobe Reader 8 or higher. You may not have the Adobe Reader installed
or your viewing environment may not be properly configured to use Adobe Reader.
For information on how to install Adobe Reader and configure your viewing
environment please see http://www.adobe.com/go/pdf_forms_configure.
Please let us know do we have any option for disabling
<NoXFA/> tag by calling formService. RenderPDF() method on adobe service
For dynamic forms its working by adding <NOXFA/> in
DDX xml . only for static forms its not working because we are not using
assembler service for this forms.
Please let us know how we can disable XFA in static forms??????????????????

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

Running a batch file on a web server

hi,
i am facing a problem regarding running a batch file(with a java command in that file) on a web server.
i am having a batch file which is running a chatapplication (this file is having a single line -- "java ChatServer 8080")
i want to execute this command ( file ) on my web server
can u help me plz ( i think u can)
thanx 4 reading my problem...
-ashish

thanx 4 replying
but as i am a developer and i am developing the aplication for a client, so should i speak to the client for this or can i do this without interrupting them?
-ashish

Facing issue in batch file

Similar Messages

Maybe you are looking for