Facing problem while adding combobox using gridbaglayout

HI, I have used gridbaglayout in my panel. after adding the gridbaglayout, if i select long value combobox does't display all the value of the selected value. Why?
This is my code
cboPrioritySearchValue = new JComboBox();
cboPrioritySearchValue.setBackground(Color.white);
cboPrioritySearchValue.addItem("ALL");
cboPrioritySearchValue.addItem(Priority.NOT.getValue());
cboPrioritySearchValue.addItem(Priority.ONE.getValue());
cboPrioritySearchValue.addItem(Priority.TWO.getValue());
cboPrioritySearchValue.addItem(Priority.THREE.getValue());
cboPrioritySearchValue.addItem(Priority.FOUR.getValue());
setConstraints(gbc,gbc.WEST,gbc.NONE,2,1,2,8,new Insets(2,5,5,5),0,0,0,0);
gbl.setConstraints(cboPrioritySearchValue,gbc);
panel.add(cboPrioritySearchValue);This is my setConstraints method,
public GridBagConstraints setConstraints(GridBagConstraints gbc, int anchor,int fill,
                                             int gridw, int gridh, int gridx, int gridy,
                                             Insets insets, int ipadx, int ipady,
                                             int weightx, int weighty)
        gbc.anchor     = anchor;
        gbc.fill       = fill;
        gbc.gridwidth  = gridw;
        gbc.gridheight = gridh;
        gbc.gridx      = gridx;
        gbc.gridy      = gridy;
        gbc.insets     = insets;
        gbc.ipadx      = ipadx;
        gbc.ipady      = ipady;
        gbc.weightx    = weightx;
        gbc.weighty    = weighty;
        return gbc;
    }Edited by: JavaHeroPrince on May 13, 2010 6:58 AM

Thanks Pete, hopefully its only a temporary problem.Short answer: It is (well ... hopefully).
Long answer: My server's dying regularly because all the connections fill up in CLOSE_WAIT states. This doesn't seem to have the same root cause as the reported bugs that I can find (issues with older JDKs) so I'm interested in investigating it beyond just upgrading everything to the latest and crossing my fingers. Unfortunately that will take time and I'm a bit pressed for spare time at the moment - so: my apologies; the domain is likely to be down until after the weekend at least.
After the weekend I'll re-target sscce.org (and .com and .net which I acquired a little while back) to a different server that's not suffering from the problem. Or if Andrew prefers I'll target a server under his control.

Similar Messages

  • Facing Problem while adding Azure Project to existing C# web application

    Hi,
    I have a web application with 5 projects under one Solution. I want to publish this web application on Windows Azure, for that I have tried to add Windows Azure Cloud Service Project but this option is not appear in option list. But when I create new web
    application add Windows Azure Cloud Service Project option appeared. I didn't understand why this happened. I have also tried to migrate old code to new project but having error
    " The type or namespace name 'DataAnnotations' does not exist in the namespace 'System.ComponentModel' (are you missing an assembly reference?)"
    If I add this dll then more than 18000 error occures like control not found(The name 'lnkbtnNew' does not exist in the current context).
    Please help me out, I am struggling since couple of days.
    Thanks in advance.

    Hi,
    Please try the following steps, see if it helps.
    1. create new azure cloud service project (it is better to choose the same version of .netframework with your web application );
    2. right click the solution, add your web application as Existing Project
    3. Right click on the “Roles” node in the Cloud Service project and select “Add | Web Role Project in solution…”
    Please try to set the “Copy Local” to “True” in order to avoid assembly missing issue, see more at:
    http://blogs.msdn.com/b/asiatech/archive/2013/01/09/how-to-resolve-the-could-not-load-file-or-assembly-issues-on-windows-azure-web-sites.aspx
    If this post doesn't give you help, please follow up with more detailed information.
    Best Regards,
    Jambor
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • I am facing problem while reading values from properties file ...i am getting null pointer exception earlier i was using jdeveloper10g now i am using 11g

    i am facing problem while reading values from properties file ...i am getting null pointer exception earlier i was using jdeveloper10g now i am using 11g

    hi TimoHahn,
    i am getting following exception in JDeveloper(11g release 2) Studio Edition Version 11.1.2.4.0 but it works perfectly fine in JDeveloper 10.1.2.1.0
    Root cause of ServletException.
    java.lang.NullPointerException
    at java.util.PropertyResourceBundle.handleGetObject(PropertyResourceBundle.java:136)
    at java.util.ResourceBundle.getObject(ResourceBundle.java:368)
    at java.util.ResourceBundle.getString(ResourceBundle.java:334)
    at org.rbi.cefa.master.actionclass.UserAction.execute(UserAction.java:163)
    at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)
    at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

  • I am facing problem while i create a xls sheet with some Header.

    I am facing problem while i create a xls sheet with some Header.
    If i give the hed names as FirstName , LastName its comming fine.
    FirstName | LastName
    --------------------------|------------------------
    But when i specify a string like New"Deal , New"approach .
    = "New"Deal " | =" New"approach" .
    --------------------------|------------------------
    Problem is:
    It's adding = sign in front of the header name.
    I dont want that = to be in front of the headername.
    //rep.addColumn((String) itr.next());
    The above code is used to add the header name to the xls sheet.
    The argument will come as New"Deal
    But after seeing xls it has become ="New"Deal "
    Edited by: SUNJava2008NY on Jun 12, 2008 11:38 PM

    What is the tree structure created for the property of the componentB?
    Can you try the below code in your componentB jsp and check whether you are getting the property value
    Resource resource = slingRequest.getResource();
    String description = ((String) ResourceUtil.getValueMap(resource).get(
                        "./description", String.class));

  • Facing problem while going to  catch return result from web-services.

    Hi everybody,
    I am new to BPEL. I am facing problem while going to catch the attributes of resultsets returning from web-services(QAS). As far as my knowledge, two types of results it should return - XML entities and another is attributes which is coming as the part of XML entitites. I am able to catch the XML entities, but can't catch the attributes under it. Even, I am not able to see whether web-services returning something within that field.
    When, I tried to catch the attribute and store to a temporary varilable using the following code:
    *<assign name="AssignQASDoGetAddress1">*
    *<copy>*
    *<from variable="InvokeQAS_DoSearch_OutputVariable"*
    part="body"
    query="/ns6:QASearchResult/ns6:QAPicklist/ns6:PicklistEntry/@PostcodeRecoded"/>
    *<to variable="temp"/>*
    *</copy>*
    *</assign>*
    but, I am facing the following selectionFailure errors after running it:
    *"{http://schemasxmlsoap.org/ws/2003/03/business-process/}selectionFailure" has been thrown.*
    -<selectionFailure xmlns="http://schemasxmlsoap.org/ws/2003/03/business-process/">
    -<part name="summary">
    *<summary>*
    empty variable/expression result.
    xpath variable/expression expression "bpws:getVariableData('InvokeQAS_DoSearch_OutputVariable', 'body', '/ns6:QASearchResult/ns6:QAPicklist/ns6:PicklistEntry/@PostcodeRecoded')" is empty at line 269, when attempting reading/copying it.
    Please make sure the variable/expression result "bpws:getVariableData('InvokeQAS_DoSearch_OutputVariable', 'body', '/ns6:QASearchResult/ns6:QAPicklist/ns6:PicklistEntry/@PostcodeRecoded')"is not empty.
    *</summary>*
    *</part>*
    *</selectionFailure>*
    Getting this error it seems to me that web-service is returning nothing, but, it returns something as it has been catched using a method called isPostcodeRecoded() Java Code in Oracle ADF. This method has been used as it should return boolean whereas for catching the xml entities using java code we used the method like getPostcode(), getMoniker().
    For your information, we are using Jdeveloper as the development tool for building the BPEL process.
    Am I doing any syntax error. Please consider it as urgent and provide me asolution.
    Thanks in advance.
    Chandrachur.

    Thanks Dave and Marc, for your suggestions. Actually what I found is QAS web-service is returning nothing as attributes when the attributes are set to the default value. For example, following is the part of the wsdl of the result which QAS webservice returns.
    <xs:element name="QASearchResult">
    - <xs:complexType>
    - <xs:sequence>
    <xs:element name="QAPicklist" type="qas:QAPicklistType" minOccurs="0" />
    <xs:element name="QAAddress" type="qas:QAAddressType" minOccurs="0" />
    </xs:sequence>
    <xs:attribute name="VerifyLevel" type="qas:VerifyLevelType" default="None" />
    </xs:complexType>
    </xs:element>
    <xs:complexType name="QAPicklistType">
    - <xs:sequence>
    <xs:element name="FullPicklistMoniker" type="xs:string" />
    <xs:element name="PicklistEntry" type="qas:PicklistEntryType" minOccurs="0" maxOccurs="unbounded" />
    <xs:element name="Prompt" type="xs:string" />
    <xs:element name="Total" type="xs:nonNegativeInteger" />
    </xs:sequence>
    <xs:attribute name="AutoFormatSafe" type="xs:boolean" default="false" />
    <xs:attribute name="AutoFormatPastClose" type="xs:boolean" default="false" />
    <xs:attribute name="AutoStepinSafe" type="xs:boolean" default="false" />
    <xs:attribute name="AutoStepinPastClose" type="xs:boolean" default="false" />
    <xs:attribute name="LargePotential" type="xs:boolean" default="false" />
    <xs:attribute name="MaxMatches" type="xs:boolean" default="false" />
    <xs:attribute name="MoreOtherMatches" type="xs:boolean" default="false" />
    <xs:attribute name="OverThreshold" type="xs:boolean" default="false" />
    <xs:attribute name="Timeout" type="xs:boolean" default="false" />
    </xs:complexType>
    <xs:complexType name="PicklistEntryType">
    - <xs:sequence>
    <xs:element name="Moniker" type="xs:string" />
    <xs:element name="PartialAddress" type="xs:string" />
    <xs:element name="Picklist" type="xs:string" />
    <xs:element name="Postcode" type="xs:string" />
    <xs:element name="Score" type="xs:nonNegativeInteger" />
    </xs:sequence>
    <xs:attribute name="FullAddress" type="xs:boolean" default="false" />
    <xs:attribute name="Multiples" type="xs:boolean" default="false" />
    <xs:attribute name="CanStep" type="xs:boolean" default="false" />
    <xs:attribute name="AliasMatch" type="xs:boolean" default="false" />
    <xs:attribute name="PostcodeRecoded" type="xs:boolean" default="false" />
    <xs:attribute name="CrossBorderMatch" type="xs:boolean" default="false" />
    <xs:attribute name="DummyPOBox" type="xs:boolean" default="false" />
    <xs:attribute name="Name" type="xs:boolean" default="false" />
    <xs:attribute name="Information" type="xs:boolean" default="false" />
    <xs:attribute name="WarnInformation" type="xs:boolean" default="false" />
    <xs:attribute name="IncompleteAddr" type="xs:boolean" default="false" />
    <xs:attribute name="UnresolvableRange" type="xs:boolean" default="false" />
    <xs:attribute name="PhantomPrimaryPoint" type="xs:boolean" default="false" />
    </xs:complexType>
    here the attributes like FullAddress, PostcodeRecodedare , etc. are not being return by the web-service when it is getting the default value false. But, if it gets true then , it is being displayed at the BPEL console.
    Do you have any idea how can I catch the attributes and its value even when it gets the default value which is already set. Previously, it was returning(it was not being displayed at the console).
    Thanks once again for your valuable suggestions...!!!
    Chandrachur.

  • I am facing problems while openin an application in facebook and other places.when i go to the application,an error shows and firefox closes autmatically either i send error reports or dont.....plz help

    i am facing problems while openin an application in facebook and other places.when i go to the application,an error shows and firefox closes autmatically either i send error reports or dont.....plz help

    Notes:
    1) Please use the code tags when posting code or JNLP/HTML. It helps to retain indentation and avoids asterisks and plus sings being interpreted as formatting marks. To do that, select the code/JNLP etc. and click the CODE button seen on the Plain Text tab of the message posting form.
    2) That launch file is invalid. You might check it (and the project in general) using JaNeLA.
    3) The only place that SimpleSerial class could be, that the JRE would find, is in the root of aeon.jar. Is it actually there?

  • Hi Experts , I am currently facing problems while running restricted version copy .. The log says 0 location products copied and that the process has has timed out. the error message is /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014, th

    Hi Experts , I am currently facing problems while running restricted version copy in sap apo .. The log says 0 location products copied and that the process has timed out. the error message is " /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014 " , then ending in time limit exceeded. could anyone explain why this happens. please note even if the log says 0 location products copied , in reality they have have been partially copied.
    Regards
    Jerel

    Hi, thank you for your replies, I found out few things about my servlet, and its portability
    and i have few questions, although i marked this topic as answered i guess its ok to post
    I am using javax.servlet.context.tempdir to store my files in that servletcontext temporary directory. But i dont know how to give hyperlink
    of the modified files to the user for them to download the modified files.
    What i am using to get the tempdir i will paste
    File baseurl = (File)this.getServletContext().getAttribute("javax.servlet.context.tempdir");
    System.out.println(baseurl);
    baseurl = new File(baseurl.getAbsolutePath()+File.separator+"temp"+File.separator+"files");
    baseurl.mkdirs();so i am storing my files in that temp/files folder and the servlet processes them and modifies them, then how to present them as
    links to the user for download ?
    and as the servlet is multithreaded by nature, if my servlet gets 2 different requests with same file names, i guess one of them will be overwritten
    And i want to create unique directory for each request made to the servlet , so file names dont clash.
    one another thing is that i want my servlet to be executed by my <form action> only, I dont want the user to simply type url and trigger the servlet
    Reply A.S.A.P. please..
    Thanks and regards,
    Mihir Pandya

  • Facing problems while mapping fields in LSMW.

    Hi Friends,
           i got a requirement to upload the address. Address is in
    flat file.requirement is to use LSMW with object 0602 and the
    standard report program is RSADRLSM02.This standard report
    program uses the structures for uploading are ADR_LSM0 to
    ADR_LSM6.But i have some fields in the source structure are
    not at all related to the fields in destination structure(i.e ADR_LSM0 to ADR_LSM6)therefore i am facing problem while
    mapping the source and destination fields.is there any other
    way to map the fields.Please help me it's very urgent.
    Thanks in advance.
    Regards,
    Sumiti Gupta.

    Thanks for the reply santosh.
    GIS FIELD                                      SAP LOCATION
    ADDR_GID(10char)                     EXADR-KUNNR
    STR_NO(10)                               ADR_LSM0-STRT_CODE
    STR_NAME (42)                         ADR_LSM0-STREET
    ADDRESS_UNIT(7)                     ADR_LSM0-HOUSENUM_H
                                                          and
                                                     ADR_LSM0-HOUSENUM_L
    ADDRESS_UNIT_TYPE(5)           EVBSD-VBSART
    POST_CODE (10)                       ADR_LSM0-POST_CODE
    MUNI_NAME (40)                        EXADR-APPLDATA
    MAILING_CITY(60)                      ADR_LSM0-CITY_NAME
    MAP_PAGE(4)                           EADRSTRTGRID_GRID_ID
    EVAC_ZONE(1)                          EVBSD-ZEVAC
    PIN_NUM (18)                            EHAUD-PLTXT
    in the above fields the structure with ADR_LSM0 are found with the other fields i m not able to find the similar fields in the destination structure.Please help me.
    Regards,
    Sumiti Gupta.

  • Facing Problems while Browsing.

    Hello Everyone,
    I'm facing problems while browsing anything through my BlackBerry Brower. The error I get is: Hello Everyone,
    I'm facing problem while browsing anything through BlackBerry Brower. The error I get is: “Timeout occurred while processing the operation.”
    Mainly I open is Facebook, Twitter and Google and I get this error everytime.
    Model: Curve 9360
    OS: 7.1
    Regards,
    Jasbir

    Hi and Welcome to the Community!!
    I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
    1) Register HRT
    KB00510 How to register a BlackBerry smartphone with the wireless network
    Please wait for one "registration" message to arrive to your Messages app
    2) Resend Service Books
    KB02830 Send the service books for the BlackBerry Internet Service
    Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
    3) Batt Pull Reboot
    Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Facing problem while downloading ALV grid Output into Excel

    Hi Guys,
    I am facing problem while downloading ALV grid Output into Excel.
    It is downloading into excel, but all character columns first and next all quantity columns it is displaying. But I need columns order as it is in the grid.
    If I take all columns as characters it works fine. But it will be problem for calculating total, subtotals of quantity columns
    Can someone help me regarding this
    thanks for your help

    Hi,
    Open up Excel on your desktop. Goto Tools > Macro > Security.
    Make sure that your security is set to Medium (or less). SAP uses OLE automation to run the Excel instance and in Office 2003 (for example), Microsoft has increased their default security setting to High. With the High setting, the output to Excel fails.
    Was this your problem? Don't forget those points, either.
    check with this wetther it is solved or not.
    Regards,
    sana.

  • Facing problem while doing MIRO

    Hi gurus,
    I facing problem while doing MIRO, system showing the message "Customization for "company code" J_1iindcus missing in the table"
    pls help

    Hi,
    Please do customization for India Localisation-Phase-II.
    In transaction J1IT, maintain company code settings.
    J1IT->Global Settings->Company Settings
    Reward if useful.

  • Bold 9000: problem while adding email address to TO:

    Hi Guys!!
    I am facing a problem while adding email addresses (whcih are already stored in my BB Bold 9000). while adding "To: or CC:" only 1 email stored contact is displayed. others are not.
    please help me some solution.
    regards
    Thanks & regards
    Ajay Jain

    If I understand you correctly, while adding email addresses to any particular email IDs you're can't see multiple email IDs. Email addresses are stored under the contact names. You can save multiple email address under one contact. Now while putting name in To/CC field you should be typing the names of the contact and when pressing/selecting names you would be prompted with multiple email addresses.
    Try this -
    When you device is POWERED ON, remove the battery for a minute, and then reinsert the battery. This make a reboot to your device which minor issues with the BlackBerry device.
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • Error while adding a used relationship between the New DC and the Web DC

    Hi Gurus
    We are getting the Error in NWDS while Adding  a used relationship between the New DC and the Web DC.
    Steps what we are Done
    1. Create the custom project from inactiveDC's
    2.creating the project for the component crm/b2b in SHRAPP_1
    3.After that we changed the application.xml and given the contect path.
    4.Then we tried to add Dependency to the custom create DC we are getting the error saying that illegal deppendency : the compartment sap.com_CUSTCRMPRJ_1 of DC sap.com/home/b2b_xyz(sap.com.CUSTCRMPRJ_1) must explicitly use compartment sap.com_SAP-SHRWEB_1 of DC sap.com/crm/isa/ like that it was throwing the error.
    so, we skip this step and tried to create the build then it is saying that build is failed..
    Please help us in this regard.
    Awaiting for ur quick response...
    Regards
    Satish

    Hi
    Please Ignore my above message.
    Thanks for ur Response.
    After ur valuble inputs we have added the required dependencies and sucessfully created the projects, then building of the  projects was also sucessfully done and  EAR file was created.
    We need to deploy this EAR file in CRM Application Server by using the interface NWDI.
    For Deploying the EAR into NWDI, we need to check-in the activites what i have created for EAR. once i check-in the activites ,the NWDI will deploy the EAR into CRM Application Server.
    In the Activity Log we are able to check the Activities as Suceeded but the Deployment column is not showing any status.
    When i  right click on my activity Id the deployment summery is also disabled.
    So finally my Question is that where can i get the deployment log file, and where can i check the deployment status for my application..
    Any pointers in this regard would be of great help..
    Awaiting for ur valuble Responses..
    Regards
    Satish

  • Problem while determining receivers using interface mapping: "SYSTEM FAILURE" during JCo call. Bean SMPP_CALL_JAVA_RUNTIME3 not found

    We have a SOAP to PROXY scenario Which is in Production.
    We keep getting the Error:
    " Problem while determining receivers using interface mapping: "SYSTEM FAILURE" during JCo call. Bean SMPP_CALL_JAVA_RUNTIME3 not found on host XXXXXX, ProgId =AI_RUNTIME_XXX.
    We are using Standard Receiver Determination with single receiver without any condition. And no mapping being used in interface determination.
    What are all the possible situation where we face such as this issue in Production.

    Please check the SAP note
    # 1706936 - messages fails with error java.lang.RuntimeException Bean SMPP_CALL_JAVA_RUNTIME3 not found
    1944248 - PI unstable due to JCO_SYSTEM_FAILURE mapping issues

  • I am facing problem while installing addon

    I am facing problem while addon installation
    Steps that i follow
    1.  Develop Custom Application in VB.Net.
    2.  Created Setup Wizard.
    3.  Create ARD File.
    4.  I start the SAP B1 - Administrator - Add On Administration.
        When I specify this ard file it is trying to install the add-on. after few second it flashes the mession that it could not file myaddon.msi file in temp folder of windows. After this when i close that dialog box. it contiune with installation (may be in silent mode). it takes near about 1/2 an hour and after completing this setup it shows error of installation failed.
    I don't why it is happening. Any solution for it.
    Please Help Me.....

    Hi Owen,
    I have tried .net Package & Deployment as well as InstallShield 2008. finally i have tried B1DE also. B1DE gives us template only in vb.net but not in C#.net and i want this in c#.net.
    I was trying to understand the code that it creates. I won't be able get the code also.
    I would like to go from other way apart from B1DE.
    Need Urgent Help...

Maybe you are looking for

  • Cannot transfer music after upgrading to Lollipop

     Hello, A few weeks ago I upgraded my Z1 Compact to Lollipop. As if having trouble answering calls and getting the internet to work on my phone wasn't trouble enough, I now have noticed to be unable to transfer music into my phone through any applica

  • Issue with Packaged Jars added to project from resource Palette

    Hello! I am using Jdeveloper 11.1.2.2. I started this post thinking there was an issue having to do with packaging jars that refer to other libraries (see post Are Libraries Required? Now I realize it is a different issue (although that other post is

  • Links in converted DOC to PDF not working properly

    I need to convert a word doc to PDF and retain the hyperlinks. The links all point to PDF documents in other folders. When I convert the word doc to PDF through word's 'save as' or PDF export, the links get update to web URL-like links that open the

  • Not Able to Print in PDF Format Apex

    we are not able to print in pdf format with using a template, if we use default layout we are getting a pdf output, Can any one please help me on this issue.... Thanks Malleswar

  • Another UnsatisifedLinkError thread

    Hi all, I've had a look around and not yet managed to find a solution to my problem. Some of the other issues have been of help with errors I was getting previously, but I'm totally stuck now. I've got a DLL file supplied by Intuit (company that make