I am facing problem while installing addon

I am facing problem while addon installation
Steps that i follow
1. Develop Custom Application in VB.Net.
2. Created Setup Wizard.
3. Create ARD File.
4. I start the SAP B1 - Administrator - Add On Administration.
When I specify this ard file it is trying to install the add-on. after few second it flashes the mession that it could not file myaddon.msi file in temp folder of windows. After this when i close that dialog box. it contiune with installation (may be in silent mode). it takes near about 1/2 an hour and after completing this setup it shows error of installation failed.
I don't why it is happening. Any solution for it.
Please Help Me.....

Hi Owen,
I have tried .net Package & Deployment as well as InstallShield 2008. finally i have tried B1DE also. B1DE gives us template only in vb.net but not in C#.net and i want this in c#.net.
I was trying to understand the code that it creates. I won't be able get the code also.
I would like to go from other way apart from B1DE.
Need Urgent Help...

Similar Messages

I am facing problem while installing iTunes

I am facing problem while installing iTunes with this error
"There is problem with you installer package. A program required for this install to complete could not be run."

Hi Owen,
I have tried .net Package & Deployment as well as InstallShield 2008. finally i have tried B1DE also. B1DE gives us template only in vb.net but not in C#.net and i want this in c#.net.
I was trying to understand the code that it creates. I won't be able get the code also.
I would like to go from other way apart from B1DE.
Need Urgent Help...

Problem while installing solaris 10 on HP proliant DL 380 G5.

Hi,
facing problem while installing solaris 10 05/09 on HP proliant DL 380G5. The array controller is E200.
i have installed the raid controller driver CPQary3-2.1.0-solaris10-i386, it is going ahead but not detecting the whole hard disk space. My hard disk space is SAS 146GB. There are two 146GB hard disk present. It is showing only 978 MB & only one hard disk. So please help me out. my mail ID is [email protected]

I have a similar issue trying to load Solaris 10u4 on an IBM x236.
I had to put in a recognized SCSI card, attach an external array to the card, and install Solaris 10u4 on the array. Then I had to install the correct driver from OpenSolaris (an Adaptec one for IBM ServeRAID), and do a live upgrade onto the now-visible internal disks. Then I removed the array and cleaned up the traces from the live upgrade.
You may have to do something similar.
And last month the boot drive got corrupted when power was interrupted. "Oops. Wrong plugs..." This time the external array will stay connected.

Pages is taking annoyingly long to download and install. Any of you faced similar problems while installing it?

ages is taking annoyingly long to download and install. Any of you faced similar problems while installing it?

Who knows what "ages" means to you, or what speed Internet connection you have, or what else is happening on your computer or network.
Pages/iWork are not small so it can take a while. Sometimes heavy demand at the Apple end can slow their server as well.
Peter

Problem while installing CS6, Please Help

Hello everyone, I almost search every help available around the internet for my problem and can't figure that out. Hope you guys might had better knowledge about that. I am facing a problem while installing Photoshop CS6 version and I already deleted my previous version and I am receiving the pop of "LOW COMPATIBILITY". Please tell me what might be the problems and the way to get out of this situation so that I can continue doing work for my deals site dealaboo.

Hi,
Please share your system configuration on which you are trying to install Ps CS6.
Regards,
Ashutosh
Ps Installer QE

Problem while Installing adobe pro X

we have purchased adobe CS6 full version at biotech park, lucknow. and facing some problem while installing adobe pro X component out of all the given component. kindly help me on this..

What system? What is the exact error? Provide more info and the install error summary.
Mylenium

Facing Proble while installing Oracle 9iAS

Hi All,
I am facing a problem while installing the Oracle 9iAS software..I have Windows NT Service Pack 6a .. When I am installing the Oracle 9iAS the installer showing an error "Windows Systems File has not been run on this system. One or more Operating System Files currently use need to be updated".
What could be the proble.. Could u please help me out regarding this..
Thanx in Advance,
Satheesh

you have to have some system files in winnt system by oracle installer.
you can do this by ..
1)remove all ias installed products and its services from thet host.
2)run "wfs.exe" from 9iAS disk1.
3)reboot your host computer.
4)install iAS .

Problem while installing NWSneakPreviewSP11

Hi All,
I am facing a problem while installing NWSneakPreviewSP11.In installation 29 phases available.
It complete 17 phases successfully but get stuck at 18 phase.
The 18 phase is "Load java DataBase Content" and At status bar it's showing Info:"EP_LOCK_APPLS loaded" message.I have seen view Log also this is not showing any error Message.
What could be the possible reason to get stuck installation ....?
Plz tell me how can i resolve this problem.
Arun Sharma

Some of the reasons could be:
1. You do not have sufficient DB Space
2. If it is SP11, you did not set your system Timezone to "Amsterdam, Berlin..." which is +1 GMT
3. You might be using JDK other than 1.4.2_08 (this problem was reported when 1.4.2_10 was used)
HTH
Venkat

Facing problem while going to catch return result from web-services.

Hi everybody,
I am new to BPEL. I am facing problem while going to catch the attributes of resultsets returning from web-services(QAS). As far as my knowledge, two types of results it should return - XML entities and another is attributes which is coming as the part of XML entitites. I am able to catch the XML entities, but can't catch the attributes under it. Even, I am not able to see whether web-services returning something within that field.
When, I tried to catch the attribute and store to a temporary varilable using the following code:
*<assign name="AssignQASDoGetAddress1">*
*<copy>*
*<from variable="InvokeQAS_DoSearch_OutputVariable"*
part="body"
query="/ns6:QASearchResult/ns6:QAPicklist/ns6:PicklistEntry/@PostcodeRecoded"/>
*<to variable="temp"/>*
*</copy>*
*</assign>*
but, I am facing the following selectionFailure errors after running it:
*"{http://schemasxmlsoap.org/ws/2003/03/business-process/}selectionFailure" has been thrown.*
-<selectionFailure xmlns="http://schemasxmlsoap.org/ws/2003/03/business-process/">
-<part name="summary">
*<summary>*
empty variable/expression result.
xpath variable/expression expression "bpws:getVariableData('InvokeQAS_DoSearch_OutputVariable', 'body', '/ns6:QASearchResult/ns6:QAPicklist/ns6:PicklistEntry/@PostcodeRecoded')" is empty at line 269, when attempting reading/copying it.
Please make sure the variable/expression result "bpws:getVariableData('InvokeQAS_DoSearch_OutputVariable', 'body', '/ns6:QASearchResult/ns6:QAPicklist/ns6:PicklistEntry/@PostcodeRecoded')"is not empty.
*</summary>*
*</part>*
*</selectionFailure>*
Getting this error it seems to me that web-service is returning nothing, but, it returns something as it has been catched using a method called isPostcodeRecoded() Java Code in Oracle ADF. This method has been used as it should return boolean whereas for catching the xml entities using java code we used the method like getPostcode(), getMoniker().
For your information, we are using Jdeveloper as the development tool for building the BPEL process.
Am I doing any syntax error. Please consider it as urgent and provide me asolution.
Thanks in advance.
Chandrachur.

Thanks Dave and Marc, for your suggestions. Actually what I found is QAS web-service is returning nothing as attributes when the attributes are set to the default value. For example, following is the part of the wsdl of the result which QAS webservice returns.
<xs:element name="QASearchResult">
- <xs:complexType>
- <xs:sequence>
<xs:element name="QAPicklist" type="qas:QAPicklistType" minOccurs="0" />
<xs:element name="QAAddress" type="qas:QAAddressType" minOccurs="0" />
</xs:sequence>
<xs:attribute name="VerifyLevel" type="qas:VerifyLevelType" default="None" />
</xs:complexType>
</xs:element>
<xs:complexType name="QAPicklistType">
- <xs:sequence>
<xs:element name="FullPicklistMoniker" type="xs:string" />
<xs:element name="PicklistEntry" type="qas:PicklistEntryType" minOccurs="0" maxOccurs="unbounded" />
<xs:element name="Prompt" type="xs:string" />
<xs:element name="Total" type="xs:nonNegativeInteger" />
</xs:sequence>
<xs:attribute name="AutoFormatSafe" type="xs:boolean" default="false" />
<xs:attribute name="AutoFormatPastClose" type="xs:boolean" default="false" />
<xs:attribute name="AutoStepinSafe" type="xs:boolean" default="false" />
<xs:attribute name="AutoStepinPastClose" type="xs:boolean" default="false" />
<xs:attribute name="LargePotential" type="xs:boolean" default="false" />
<xs:attribute name="MaxMatches" type="xs:boolean" default="false" />
<xs:attribute name="MoreOtherMatches" type="xs:boolean" default="false" />
<xs:attribute name="OverThreshold" type="xs:boolean" default="false" />
<xs:attribute name="Timeout" type="xs:boolean" default="false" />
</xs:complexType>
<xs:complexType name="PicklistEntryType">
- <xs:sequence>
<xs:element name="Moniker" type="xs:string" />
<xs:element name="PartialAddress" type="xs:string" />
<xs:element name="Picklist" type="xs:string" />
<xs:element name="Postcode" type="xs:string" />
<xs:element name="Score" type="xs:nonNegativeInteger" />
</xs:sequence>
<xs:attribute name="FullAddress" type="xs:boolean" default="false" />
<xs:attribute name="Multiples" type="xs:boolean" default="false" />
<xs:attribute name="CanStep" type="xs:boolean" default="false" />
<xs:attribute name="AliasMatch" type="xs:boolean" default="false" />
<xs:attribute name="PostcodeRecoded" type="xs:boolean" default="false" />
<xs:attribute name="CrossBorderMatch" type="xs:boolean" default="false" />
<xs:attribute name="DummyPOBox" type="xs:boolean" default="false" />
<xs:attribute name="Name" type="xs:boolean" default="false" />
<xs:attribute name="Information" type="xs:boolean" default="false" />
<xs:attribute name="WarnInformation" type="xs:boolean" default="false" />
<xs:attribute name="IncompleteAddr" type="xs:boolean" default="false" />
<xs:attribute name="UnresolvableRange" type="xs:boolean" default="false" />
<xs:attribute name="PhantomPrimaryPoint" type="xs:boolean" default="false" />
</xs:complexType>
here the attributes like FullAddress, PostcodeRecodedare , etc. are not being return by the web-service when it is getting the default value false. But, if it gets true then , it is being displayed at the BPEL console.
Do you have any idea how can I catch the attributes and its value even when it gets the default value which is already set. Previously, it was returning(it was not being displayed at the console).
Thanks once again for your valuable suggestions...!!!
Chandrachur.

I am facing problem while reading values from properties file ...i am getting null pointer exception earlier i was using jdeveloper10g now i am using 11g

i am facing problem while reading values from properties file ...i am getting null pointer exception earlier i was using jdeveloper10g now i am using 11g

hi TimoHahn,
i am getting following exception in JDeveloper(11g release 2) Studio Edition Version 11.1.2.4.0 but it works perfectly fine in JDeveloper 10.1.2.1.0
Root cause of ServletException.
java.lang.NullPointerException
at java.util.PropertyResourceBundle.handleGetObject(PropertyResourceBundle.java:136)
at java.util.ResourceBundle.getObject(ResourceBundle.java:368)
at java.util.ResourceBundle.getString(ResourceBundle.java:334)
at org.rbi.cefa.master.actionclass.UserAction.execute(UserAction.java:163)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

I am facing problems while openin an application in facebook and other places.when i go to the application,an error shows and firefox closes autmatically either i send error reports or dont.....plz help

i am facing problems while openin an application in facebook and other places.when i go to the application,an error shows and firefox closes autmatically either i send error reports or dont.....plz help

Notes:
1) Please use the code tags when posting code or JNLP/HTML. It helps to retain indentation and avoids asterisks and plus sings being interpreted as formatting marks. To do that, select the code/JNLP etc. and click the CODE button seen on the Plain Text tab of the message posting form.
2) That launch file is invalid. You might check it (and the project in general) using JaNeLA.
3) The only place that SimpleSerial class could be, that the JRE would find, is in the root of aeon.jar. Is it actually there?

Hi Experts , I am currently facing problems while running restricted version copy .. The log says 0 location products copied and that the process has has timed out. the error message is /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014, th

Hi Experts , I am currently facing problems while running restricted version copy in sap apo .. The log says 0 location products copied and that the process has timed out. the error message is " /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014 " , then ending in time limit exceeded. could anyone explain why this happens. please note even if the log says 0 location products copied , in reality they have have been partially copied.
Regards
Jerel

Hi, thank you for your replies, I found out few things about my servlet, and its portability
and i have few questions, although i marked this topic as answered i guess its ok to post
I am using javax.servlet.context.tempdir to store my files in that servletcontext temporary directory. But i dont know how to give hyperlink
of the modified files to the user for them to download the modified files.
What i am using to get the tempdir i will paste
File baseurl = (File)this.getServletContext().getAttribute("javax.servlet.context.tempdir");
System.out.println(baseurl);
baseurl = new File(baseurl.getAbsolutePath()+File.separator+"temp"+File.separator+"files");
baseurl.mkdirs();so i am storing my files in that temp/files folder and the servlet processes them and modifies them, then how to present them as
links to the user for download ?
and as the servlet is multithreaded by nature, if my servlet gets 2 different requests with same file names, i guess one of them will be overwritten
And i want to create unique directory for each request made to the servlet , so file names dont clash.
one another thing is that i want my servlet to be executed by my <form action> only, I dont want the user to simply type url and trigger the servlet
Reply A.S.A.P. please..
Thanks and regards,
Mihir Pandya

Facing problems while mapping fields in LSMW.

Hi Friends,
       i got a requirement to upload the address. Address is in
flat file.requirement is to use LSMW with object 0602 and the
standard report program is RSADRLSM02.This standard report
program uses the structures for uploading are ADR_LSM0 to
ADR_LSM6.But i have some fields in the source structure are
not at all related to the fields in destination structure(i.e ADR_LSM0 to ADR_LSM6)therefore i am facing problem while
mapping the source and destination fields.is there any other
way to map the fields.Please help me it's very urgent.
Thanks in advance.
Regards,
Sumiti Gupta.

Thanks for the reply santosh.
GIS FIELD                                      SAP LOCATION
ADDR_GID(10char)                     EXADR-KUNNR
STR_NO(10)                               ADR_LSM0-STRT_CODE
STR_NAME (42)                         ADR_LSM0-STREET
ADDRESS_UNIT(7)                     ADR_LSM0-HOUSENUM_H
                                                      and
                                                 ADR_LSM0-HOUSENUM_L
ADDRESS_UNIT_TYPE(5)           EVBSD-VBSART
POST_CODE (10)                       ADR_LSM0-POST_CODE
MUNI_NAME (40)                        EXADR-APPLDATA
MAILING_CITY(60)                      ADR_LSM0-CITY_NAME
MAP_PAGE(4)                           EADRSTRTGRID_GRID_ID
EVAC_ZONE(1)                          EVBSD-ZEVAC
PIN_NUM (18)                            EHAUD-PLTXT
in the above fields the structure with ADR_LSM0 are found with the other fields i m not able to find the similar fields in the destination structure.Please help me.
Regards,
Sumiti Gupta.

Re: problem while installing WEB-enyterprise

Ciao Rajeev
It looks like you don't have the http directory under your active
environment.
Did you copy the http structure from '$FORTE_ROOT/appdist/webenv' to
'$FORTE_ROOT/appdist/WhateverYourEnvironment' ?
peace
Claudio
-----Original Message-----
From: Rajiv Srivastava <[email protected]>
To: [email protected] <[email protected]>
Date: Tuesday, January 19, 1999 8:48 PM
Subject: problem while installing WEB-enyterprise
while running escript to install HTTP library on my machine(WINNT server)
i am getting a error -
system Error : There are no distributions available for the application
HTTP
can anybody help.
rajeev
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi Starmgmjo,
Thanks for posting you issue. Kindly browse the below mentioned URLs to install SharePoint 2013 Step by Step
http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server
http://sharepoint-community.net/profiles/blogs/configured-domain-services-controller-and-create-users-and-groups
http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server-1
http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server-2
http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server-3
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Getting problem while installing Snow Leopard (10.6.3) on my Mac Mini. The following issue is showing : "mac os x snow leopard cannot be installed on this computer" And My Mac Configuration details: Model Name: Mac Mini Model Identifier: Macmini2,1

Getting problem while installing Snow Leopard (10.6.3) on my Mac Mini. The following issue is showing :
"mac os x snow leopard cannot be installed on this computer"
And My Mac Configuration details: Model Name: Mac Mini Model Identifier: Macmini2,1
Intel Core 2 Duo
1.83Ghz
l2Cache: 2mb
Memory : 2GB
Bus Speed: 667MHz
Please help me......
Thanks

Actually i have Mac OS X 10.5.4 DVD, I need to upgrade it to Snow Loepard(OS X 10.6)...
Please suggest me what to do???
Thanks

I am facing problem while installing addon

Similar Messages

Maybe you are looking for