Facing problem while creating a report on the value of a UDM in oem gc

Hi,
I have created a report in OEM grid control. I have selected a host for this. And I have selected an UDM from the metric list. The report works fine shows the correct graph in the report.
The problem is that along with the value from the respective udm , I am also getting the values from other metrics.
Between, I also noticed that the metric I selected is not highlighted when visited next time to the report edit page. I guess this could be the cause but dont know how to fix it. May be I am wrong, If any other issues or suggestions to my problem , Please Advise.
Thanks in advance.

It is 10.2.0.5. I guess it is a bug but where to check for confirmation.
Thanks.
Edited by: Kuldip on Jul 22, 2010 11:15 PM

Similar Messages

Facing problems while creating tree view

Hi gurus,
I am facing problems while crating the tree view can please explain me what are the basic requirements for creating tree view and explain me which are the methods i need to redefine.
any answer is appreciated.
Regards,
Chetan Agali

Hi Chetan,
Maybe Poonam Assudani weblog may help you a little more. Check it's location here:
/people/poonam.assudani/blog/2009/06/24/create-a-tree-view-display-in-crm-web-ui
Kind regards,
Garcia

Problem while creating XDO Report with PL/SQL

hi,
i am trying to create
1.created XDO Report with the help of PL/SQL which takes two parameters and code for writing XML tags to output file
2.created concurrent program that will call the PL/SQL pkg
here i am trying to create the xml out put bu t i am stuck with some errors below is the code
create or replace
PACKAGE AgentTimeReport_XDO_pkg AS
TYPE srdaterange_rec is RECORD (
fromsrdate varchar2(20 byte),
tosrdate varchar2(20 byte)
Type agent_table IS TABLE OF srdaterange_rec INDEX BY BINARY_INTEGER;
procedure GetAgentTimeList(o_errbuf OUT VARCHAR2
               ,o_retcode             OUT VARCHAR2,p_fromsrdate IN varchar2,p_tosrdate IN varchar2);
END AgentTimeReport_XDO_pkg;
create or replace
PACKAGE BODY AGENTTIMEREPORT_XDO_PKG AS
procedure GetAgentTimeList(o_errbuf OUT VARCHAR2
               ,o_retcode             OUT VARCHAR2,p_fromsrdate IN
VARCHAR2,p_tosrdate IN VARCHAR2 )
IS
cursor cs_agenttime(p_fromdate IN VARCHAR2,p_todate IN VARCHAR2)
is
SELECT
incident.Incident_Number as ServiceRequestNumber,
TO_CHAR (incident.incident_date,'DD-MON-YYYY') as ServiceRequestDate,
incident.Summary as Summary,
agenttime.agentname as AgentName,
to_char(agenttime.agentstarttime,'DD-MM-YYYY HH24:MI') as StartTime,
to_char(to_date('00:00:00','HH24:MI:SS') +
(agenttime.endtime-agenttime.agentstarttime), 'HH24:MI') as TimeSpent
FROM cs_incidents_all_b incident,cs_agenttime_agv agenttime
WHERE agenttime.incident_id=incident.incident_id
AND incident.incident_date between to_date(p_fromsrdate,'DD-MON-YYYY')
AND to_date(p_tosrdate,'DD-MON-YYYY');
BEGIN
    /*First line of XML data should be ‘<?xml version="1.0" encoding='utf-8'?>’*/
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<?xml version="1.0" encoding="utf-8"?>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<AGENTTIME>');
FOR cs_agent IN cs_agenttime(p_fromsrdate,p_tosrdate)
LOOP
/*For each record create a group tag <G_AGENT_TIME> at the start*/
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<G_AGENT_TIME>');
/*Embed data between XML tags for ex:- <EMP_NAME>Abeesh</EMP_NAME>*/
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<SERVICEREQUEST_NUMBER>' ||
cs_agent.ServiceRequestNumber
                                || '</SERVICEREQUEST_NUMBER>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<SERVICEREQUEST_DATE>' ||
cs_agent.ServiceRequestDate ||
                                   '</SERVICEREQUEST_DATE>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<START_TIME>' || cs_agent.StartTime
                                 ||'</START_TIME>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<TIME_SPENT>' || cs_agent.TimeSpent
                                 ||'</TIME_SPENT>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'</G_AGENT_TIME>');
END LOOP;
/*Finally Close the starting Report tag*/
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'</AGENTTIME>');
END GetAgentTimeList;
END AGENTTIMEREPORT_XDO_PKG;any one help me
the log file
Service: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
DEMOXDO module: DemoAgentXDO Report
Current system time is 28-JUL-2009 05:16:46
**Starts**28-JUL-2009 05:16:46
ORACLE error 1861 in FDPSTP
Cause: FDPSTP failed due to ORA-01861: literal does not match format string
ORA-06512: at "APPS.AGENTTIMEREPORT_XDO_PKG", line 9
ORA-06512: at "APPS.AGENTTIMEREPORT_XDO_PKG", line 25
ORA-06512: at line 1
The SQL statement b
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 28-JUL-2009 05:16:46
---------------------------------------------------------------------------

Hi,
Please see if these documents help.
Note: 367607.1 - FDPSTP Failed Due to ORA-01861: Literal Does Not Match Format String
Note: 370272.1 - not able to run the report set having unsupported date format of fnd-date4
Note: 376034.1 - How to Handle New Date Formats in SQL*Plus and PL/SQL Procedures?
Regards,
Hussein

Problem while calling a report from the report

Hi
i want call a report from the report, i have written URL in the Hyperlink and its working
but
1) i want open it in the diffrent window.
2) suppose if u have a report called emp it should call antoher 2 report at a time.
( how to put 2 URL in the hyperlink?).
i,e if i press a hyperlink it should open emp1 and emp2
Please help me.
thanks and regards

Thanx,
I have solved this problem.
Regards,
Hafeez

Problem while creating new item in the sale order in case of Thirdparty

Dear Gurus
The following error is coming
while adding the new item with quantity in the sale order in case of third party .
Error Info... 00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC
Update key... 482ACBD89C7D0067E10080000A8C681C
Can give any idea abt this.
Rgds
Surya

Hi
This error comes up due to number range problem in the
tables.
As you have said this is a third party Sales order, just check if this is relevant to the PR being generated or the Sales order getting created.
Check the Current number of the PR document type in the EBAN table & check if it is the same for the Number ranges in customizingin OMH7.
If they are not the same... & the current number in OMH7 is smaller than the Number in the table EBAN , you need to change the current number equal to the EBAN table.
If this is the case fior sales orders similarly check for Sales order table & sales order number range object.
reward points if useful
Thanks & Regards
Kishore

Problem while creating HR report with PNP LDB

Hi Experts,
I am working on HR Report using LDB PNP.
In HR REPORT CATEGORY,i have mentioned "___00003" in Master Data radio button.
Now i can create my own selection screen.In my Selection-Screen i am using pushbutton.
Code is:
SELECTION-SCREEN:
PUSHBUTTON 5(15) but1 USER-COMMAND cli1,
PUSHBUTTON 30(15) but2 USER-COMMAND cli2.
INITIALIZATION.
but1 = 'PDF FORMAT'.
but2 = 'FILE FORMAT'.
AT SELECTION-SCREEN.
CASE sscrfields.
    WHEN 'CLI1'.
      PERFORM PDF.
    WHEN 'CLI2'.
      PERFORM FILE.
ENDCASE.
While executing i have clicked on 2nd pusbutton.
It is going to CASE and also i am getting value of sscrfields = CLI2 .
also sy-subrc = 0.
but after that it is not going to WHEN condition.
Can anybody plz help me out in this.
Regards,
Ankur

SSCRFIELDS is a structure so you have to ask:
CASE SSCRFIELDS-UCOMM.
WHEN xx.
ENDCASE:

Facing problem while creating bpel process

Hi All,
http://docs.oracle.com/cd/E27559_01/dev.1112/e27150/request.htm#CIHFBEFB
I followed the above document to create a custom bpel process. In the section 21.3.5.5 Configuring Workflow Selection,it is given as
5.Specify the Input as catalogData and the Output as workflowstage.
i was unable to find workflowstage in the output search .
can anyone help me out of this?
Regards,
trainee

I hope u had no problems in mapping input as catalog data. It will be present under CatalogData.xsd in Type Explorer.
Now to specify Output as workflowstage click the + sign next to BusinessRule.xsd and select 'StageOutput : stage'.

Facing problems while creating OBIEE Repositories

Hi All,
Am a beginner for OBIEE,I am trying to create a repository but Its prompting with below Error Message,please advise.
[nQSError : 16001] ODBC error state : 08004 code: 10018 message: [NQODBC][SQL_STATE: 08004][nQSError: 10018] Access for the
requested connection is refused.
[nQSError : 43001] Authentication failed for test in repository Star: invalid user/password
Thanks,
Dnesh

it is saying your user name/pwd is incorrect. check your credentials.

Problems while creating Web Services in development server

Hello,
We are facing problems while creating Web services . The transaction like WSADMIN, WSCONFIG are not there in development server. Its gives message u2018This transaction is obsoleteu2019.
Due to this while creating Webservice, there is and error message . Kindly guide me whats needs to be done.
We have also tried the transaction WSADMIN2 as suggested by SAP, but didnu2019t know wat needs to be done.
Regards,
Rachel
Edited by: Rachel on Feb 3, 2009 9:15 AM

Hi,
With your help, we were configuring WEB Service through soamanger.Due to some problem, we couldn't proceed further.Kindly guide us with the further steps.
*steps followed *
Step 1 : Entered Service Registry Parameters in WSPARAM .
Step 2 : In transaction SOAMANAGER->Technical Configuration -->System Global settings
Step3 : From u2018SE80u2019 transaction, selected the package ZHR and then right clicked to create the enterprise service -> Client Proxy (Service Producer)
We have followed steps in se80.Don't know how to proceed further.
We are unable to find the service in soamanger .How to find the service name in soamanager?
Regards,
Rachel
Edited by: Rachel on Feb 3, 2009 12:38 PM
Edited by: Rachel on Feb 3, 2009 12:48 PM

Hi all, i'm new and facing a problem while creating a new file for Xcode. I can't select the box "with XIB for user interface" if the subclass is "UIViewController".this problem happen after i upgrade Xcode to 4.6 version.Appreciate for any help rendered.

Hi all, i'm new to Mac book & Xcode. I'm learning and facing problems while creating a new file for Xcode. Before i upgrade the software, i have no issue to create simple steps in apps. After upgrade Xcode to 4.6 version, i'm facing lot's of issue eg.
1) "the identity "iphone developer" doesn't match any valid certificate/ private key pair",
2) can't select the box "with XIB for user interface" if the subclass is "UIViewController"..
Appreciate for any help rendered.

Mikko777 wrote:So what is the best?
I wouldn't judge. I've been to Arch for a week, you know? But as said, it's VERY close to it.
What I dislike after a week is makepkg not handling dependencies automatically (which would be overhead, so probably not appropriate).
Mikko777 wrote:Also theres KDEmod for modular kde, dunno if its for 64 bits tho.
Don't actually need that as said ... I see no real benefit of having that other than not beeing a KDE user or having Gentoos useflags.
Mikko777 wrote:PS:You produce a lot of text and welcome smile
Yeah. Wonder why I'm still employed? So do I ...

Problem while creating xml with cdata section

Hi,
I am facing problem while creating xml with cdata section in it. I am using Oracle 10.1.0.4.0 I am writing a stored procedure which accepts a set of input parameters and creates a xml document from them. The code snippet is as follows:
select xmlelement("DOCUMENTS",
xmlagg
(xmlelement
("DOCUMENT",
xmlforest
(m.document_name_txt as "DOCUMENT_NAME_TXT",
m.document_type_cd as "DOCUMENT_TYPE_CD",
'<![cdata[' || m.document_clob_data || ']]>' as "DOCUMENT_CLOB_DATA"
) from table(cast(msg_clob_data_arr as DOCUMENT_CLOB_TBL))m;
msg_clob_data_arr is an input parameter to procedure and DOCUMENT_CLOB_TBL is a pl/sql table of an object containing 3 attributes: first 2 being varchar2 and the 3rd one as CLOB. The xml document this query is generating is as follows:
<DOCUMENTS>
<DOCUMENT>
<DOCUMENT_NAME_TXT>TestName</DOCUMENT_NAME_TXT>
<DOCUMENT_TYPE_CD>BLOB</DOCUMENT_TYPE_CD>
<DOCUMENT_CLOB_DATA>
<![cdata[123456789012345678901234567890123456789012]]>
</DOCUMENT_CLOB_DATA>
</DOCUMENT>
</DOCUMENTS>
The problem is instead of <![cdata[....]]> xmlforest query is encoding everything to give < for cdata tag. How can I overcome this? Please help.

SQL> create or replace function XMLCDATA_10103 (elementName varchar2,
2                                             cdataValue varchar2)
3 return xmltype deterministic
4 as
5 begin
6     return xmltype('<' || elementName || '><![CDATA[' || cdataValue || ']]>
7 end;
8 /
Function created.
SQL> select xmlelement
2         (
3            "Row",
4            xmlcdata_10103('Junk','&<>!%$#&%*&$'),
5            xmlcdata_10103('Name',ENAME),
6            xmlelement("EMPID", EMPNO)
7         ).extract('/*')
8* from emp
SQL> /
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[SMITH]]></Name>
<EMPID>7369</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[ALLEN]]></Name>
<EMPID>7499</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[WARD]]></Name>
<EMPID>7521</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[JONES]]></Name>
<EMPID>7566</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[MARTIN]]></Name>
<EMPID>7654</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[BLAKE]]></Name>
<EMPID>7698</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[CLARK]]></Name>
<EMPID>7782</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[SCOTT]]></Name>
<EMPID>7788</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[KING]]></Name>
<EMPID>7839</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[TURNER]]></Name>
<EMPID>7844</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[ADAMS]]></Name>
<EMPID>7876</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[JAMES]]></Name>
<EMPID>7900</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[FORD]]></Name>
<EMPID>7902</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[MILLER]]></Name>
<EMPID>7934</EMPID>
</Row>
14 rows selected.
SQL>

Problem while creating Item Data in OCA application

Hello Experts!
I am creating a PDA application (OCA) for NW7.1.
I am facing problem while creating Sales Order. I can create the Header structure. But when I Create the corresponding item structure for the header , the items are not getting created. After Sync I can only see the header structure in the middleware.
I am using the following code to create the header and item.
OrderCreateDocType header = model.createOrderCreateDocType();
header.setRefdoctype("41001180");
header.setDocType("ZRRJ");
header.setSalesOrg("AND");
wdContext.nodeOrderCreateDocType().bind(Collections.singleton(header));
OcaRoot.getInstance().commit();
wdContext.nodeOrderCreateDocType().setLeadSelection(0);
header=(OrderCreateDocType)wdContext.nodeOrderCreateDocType().getCurrentElement().model();
OrderCreateOrderItemsIn items = header.createNewOrderItemsIns();
long item = new Long("000010").longValue();
items.setItmNumber(item);
items.setMaterial("MMKT090114");
items.setPlant("ANDP");
items.setTargetQty(new BigDecimal(7));
items.setTargetQu("IT");
header.setOrderItemsIns(Collections.singleton(items));
OcaRoot.getInstance().commit();
Am I missing out on step.
Reply Awaited
Regards
Priya Ghosh

Hello Priya
in your case as the DOs are of upload only type, you are not able to create a
child on an already created header, because updates are not allowed for upload only DOs.
So in this case you first have to create an instance of the header first and then create an item. And only after this call a commit on the model
Best Regards
Vaidehi

Facing problem while doing MIRO

Hi gurus,
I facing problem while doing MIRO, system showing the message "Customization for "company code" J_1iindcus missing in the table"
pls help

Hi,
Please do customization for India Localisation-Phase-II.
In transaction J1IT, maintain company code settings.
J1IT->Global Settings->Company Settings
Reward if useful.

Hi Experts , I am currently facing problems while running restricted version copy .. The log says 0 location products copied and that the process has has timed out. the error message is /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014, th

Hi Experts , I am currently facing problems while running restricted version copy in sap apo .. The log says 0 location products copied and that the process has timed out. the error message is " /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014 " , then ending in time limit exceeded. could anyone explain why this happens. please note even if the log says 0 location products copied , in reality they have have been partially copied.
Regards
Jerel

Hi, thank you for your replies, I found out few things about my servlet, and its portability
and i have few questions, although i marked this topic as answered i guess its ok to post
I am using javax.servlet.context.tempdir to store my files in that servletcontext temporary directory. But i dont know how to give hyperlink
of the modified files to the user for them to download the modified files.
What i am using to get the tempdir i will paste
File baseurl = (File)this.getServletContext().getAttribute("javax.servlet.context.tempdir");
System.out.println(baseurl);
baseurl = new File(baseurl.getAbsolutePath()+File.separator+"temp"+File.separator+"files");
baseurl.mkdirs();so i am storing my files in that temp/files folder and the servlet processes them and modifies them, then how to present them as
links to the user for download ?
and as the servlet is multithreaded by nature, if my servlet gets 2 different requests with same file names, i guess one of them will be overwritten
And i want to create unique directory for each request made to the servlet , so file names dont clash.
one another thing is that i want my servlet to be executed by my <form action> only, I dont want the user to simply type url and trigger the servlet
Reply A.S.A.P. please..
Thanks and regards,
Mihir Pandya

I am facing problems while openin an application in facebook and other places.when i go to the application,an error shows and firefox closes autmatically either i send error reports or dont.....plz help

i am facing problems while openin an application in facebook and other places.when i go to the application,an error shows and firefox closes autmatically either i send error reports or dont.....plz help

Notes:
1) Please use the code tags when posting code or JNLP/HTML. It helps to retain indentation and avoids asterisks and plus sings being interpreted as formatting marks. To do that, select the code/JNLP etc. and click the CODE button seen on the Plain Text tab of the message posting form.
2) That launch file is invalid. You might check it (and the project in general) using JaNeLA.
3) The only place that SimpleSerial class could be, that the JRE would find, is in the root of aeon.jar. Is it actually there?

Facing problem while creating a report on the value of a UDM in oem gc

Similar Messages

Maybe you are looking for