Facing problem working with remote portlets

Hi,
I have a usecase where in i created a WSRP producer containing 2 jsr168 portlets. This producer application contains a form based security configured for the default role PortalSystemAdministrator(weblogic/weblogic).
I am have a consumer application which consumes these portlets. This application too has form based security configured for the default role PortalSystemAdministrator.
What i have done in the above application is created a SSO scenario, where in once i login in through the consumer application, the user information is passed along to the producer through the configured WSRPIdentityAsserter token, thereby forming a trust between the producer and consumer application.
This scenario works perfectly fine as expected and i am able to view the remote portlets through the consumer.
Now i have deployed another j2ee application in the same portal domain. This application resulted in a custom realm created and a set of custom authentication providers within it.
So now the current situation is that active realm in the new custom realm, and it contains 4 custom suthentication providers. Here i saw the WSRPIdentityAsserter missing from the list so from the admin console i configured WSRPIdentityAsserter.
But when i try to run the same consumer application, though it lets me login in using the same credentials (weblogic/weblogic), it fails to propagate the principal values across to the producer application.
Since in my producer portlet i have a code "request.getUserPrincipal()" which now results in a null value.
When i used the "/monitor" context to check for the flow of soap messages between the consumer and the producer i can see the header containing the Saml token and "weblogic" as the user name.
And the most wired part about all this is, when i was reading through the weblogic documentation for wsrp, i encountered something related to <enable-local-proxy> value within wsrp-producer-registry.xml. By default this value is set to false. And the things worked well earlier with this default value as explained above. So just to give a shot at trying things i set this value to true and i was able to view the portlets correctly.
But i am still yet to find a solution to the problem as stated above with the <enable-local-proxy> set to its default value(false), since it worked well earlier.
So i am pretty clueless as to what would be going wrong here. Is it that since the new custom relam is now active i need to make some sort of changes in regards to the WSRPIdentityAsserter configurations.
I tried googling for a long time, but failed to get any relevant help on this problem.
Can someone please throw some light on this.
Thanks,
Vikram

Deepak,
I dont think that would be an issue since, my scenario worked well with the default realm (myrealm) and the default user (weblogic/weblogic). In that case i suppose it used DefaultAuthenticator for authentication and WSRPIdentityAsserter for passing the information from the consumer to the producer.
But after deploying this other J2ee application on the same portal domain, which resulted in a new security realm being created and few custom authentication providers added.
So now the situation is when i try to run the above consumer application, though it lets me login but it does not pass the login credentials (principal) to the producer application (which is earlier did through the WSRPIdentityAsserter). Since my code in the producer portlet (request.getUserPrincipal()) results in null value.
Checking through the "/monitor" context shows that the consumer is passing the login credentials through the saml tokens within the SOAP header. But either it is not reaching the producer application or then there is some other reason due to which the producer application is failing to trust the consumer and provide the secure data.
Please can some one help me on this.
Thanks,
Vikram

Similar Messages

ASP application has problems working with oracle database 8.1.7

ASP application has problems working with oracle database 8.1.7 through both oracle ODBC driver and Microsoft ODBC driver
We have an ASP application running on Windows 2000 server, and with 8.1.7 Net8Client and MDAC 2.6 SP1.
The application worked fine with an Oracle 8.0.5 database.
After upgrading oracle database to 8.1.7.0.0, our ASP application works fine except when updating the same data record more than once. The application is not saving our updates.
We tested our application using Oracles ODBC driver v8.1.7.5.0
and experienced more problems. We had problems just bring up our data entry pages. In either case, we are returned with some 505 errors in our browser, problems with the ASP pages and IIS, the page is not displaying.
If anyone has some suggestions on how to fix my problem, please advise. Thanks in advance.

thanks...i saw one article with this approach..but the document did not present the detailed process...do you have one? i am still searching for a good procedure to follow...since it is an old database and focusing/studying old versions like this is a pain in the a**... :(

Airplay works with Remote but cuts out for every other App

Remote works perfectly fine but whenever I try another AirPlay app it cuts in and out. Driving me crazy. I have att wifi with an airport express. Any ideas? Why would AirPlay work with Remote but fail with every other app?

Remote does not use AirPlay.

Latest EyeTV doesn't work with remote after installing latest candelair, 1.20 no option in preferences to activate snow leopard?

After upgrading to Snow Leopard my mac remote no longer works with EyeTV. Have checked EyeTV is the latest version, have also installed the latest Candelair which other users have advised needs to have snow leopard activated in the preferences but on my version there is no mention of this in the preferences pane.
Just lists...
Driver version 1.20 installed
The remote control infrared receiver is enabled
This computer only works with the remote with ID 27 (after I paired it)
Issues with your remote?
Can anyone advise?
Thanks

So, I figured it out myself. Way back in time I had set up some ipfw rules that I had completely forgotten about, which included this:
01000 allow ip from 192.168.0.0/16 to me dst-port 5900 in
Since I switched to the AEBS, of course the IP range changed to 10.0.1.x, so ipfw was blocking it. Problem solved.
Now I just need to figure out why my AEBS keeps crashing..

Working with remote site via FTP - getting html only

I''m using DW to remotely work with the website via FTP. Is
it possible to make it NOT download all the assosiated files with
the html, that I'm edtiting? I switched on the prompts in getting
and putting stuff, but it still tries to download or upload
additional stuff. I need it to deal only with html.
Thanks for any clues.

> It works good, it is just disturbing, that it is trying
to upload
> everything
> besides pages.
Works good? Make one silly mistake and you are toast.
Use a version control system instead. DW has a primitive one
in
Checkin/Checkout, but it may be all you need.
I would NEVER do what you are doing in a multi-user
environment....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"simterra" <[email protected]> wrote in
message
news:fpki1l$2ci$[email protected]..
> hmm, because several people work with my site on the
same documents, it
> generates a mess if they deal with editing local pages
and uploading them
> to
> the server. Working directly with pages from the server
solve this
> problem -
> they're always getting the last version (given that time
they work with
> them is
> largely different).
>
> It works good, it is just disturbing, that it is trying
to upload
> everything
> besides pages.
>

Problem Working With Framemaker 9 Dita XML Files in Framemaker 10

I just upgraded to Framemaker 10. I am encountering a number of problems when I try to work with my Dita XML help topics, which were last saved in Framemaker 9 format.
1. Using the Default Dita Template
When I open one of my documents in Framemaker 10, the Dita 1.2 template ditabase.fm is automatically applied. Everything seems fine. But then when I convert the XML to Eclipse help (which is essentially html, so we're going from XML to HTML) using Dita Open Toolkit ant scripts, I see this message:
[pipeline] [DOTJ013E][ERROR] Failed to parse the referenced file 'html\c_licensing.xml' due to below exception. Please correct the reference base on the exception message.
[pipeline] c_licensing.xml Line 25:Attribute "xmlns:ditaarch" must be declared for element type "dita".
I then opened the xml file in a text editor, and I saw this on line 25:
<dita xmlns:ditaarch = "http://dita.oasis-open.org/architecture/2005/">
Line 25 looks fine to me. Am I missing something?
2. Switching to a 1.1 Dita Template
I tried to work around the above problem. In Framemaker, I tried to set a different structured application as the default one. I closed all files and chose the default Dita 1.1 structured application (it defaults to the Dita 1.1. Composite app.)
Then I tried to open my file: I got this message inside Framemaker:
"Validation of XML failed. Continue?
Error at [FILE PATH], line 25, char 72, Message: Attribute '{http://www.w3.org/2000/xmlns/}ditaarch' is not declared for element 'dita'
Sounds familiar, doesn't it?
I switched from the default Dita 1.1. Composite structured application to the Dita 1.1. Topic structured application. Then I dirtied the source file and saved it. The messages I got in FrameMaker log window included the one above, plus I got a variety of Unknown Element messages, things like this:
Unknown element dita,
unknown element concept,
various attributes are not declared for concept,
unknown element conbody.
If I switch back to the Dita 1.1 Composite application all of these messages diappear except for this one:
Attribute '{http://www.w3.org/2000/xmlns/}ditaarch' is not declared for element 'dita'
My ant conversion scripts from the Dita Open Toolkit are still unable to process this file. They give the same message as is listed in (1) above and the file is not converted to HTML.
Can anyone help me with this problem? I've also posted this question to the Dita Users Group on Yahoo Groups. If I get an answer in one place, I'll post it in the other.
Thanks,
Nina P.

I really appreciate all the help you are providing with this, Scott. I tried your latest suggestions. Here's what happened:
Application Mappings:
I figured out how to add my "BigPage" structured application to the Applications Mappings dialog. I made a new "BigPage" mapping type, then figured out the non-intuitive part: how to add my individual BigPage topic types to it. I closed and reopened FrameMaker opened my test document, and, as before (before I did the application mappings) I saw my BigPage applications listed in the Structure Tools > Set Structured Application drop-down. I selected the appropriate application (in this case it was DITA1.1-BigPage-Reference-FM and clicked the "Set" button.
It is at this point in Framemaker 9 (and also once, in FrameMaker 10, early in this process, but I haven't been able to replicate it since) that the page size would change to tabloid size, indicating that the document was using the template from the BigPage reference structured application, not the regular DITA1.1 reference application. But this did not happen.
I tried saving the document, closing it, and reopening it. Once again the default structured application assigned to that document was "reset" to DITA1.1-Reference-FM. But the fact that the page size did not immediate refresh to tabloid size told me that although I did select the BigPage application in the drop-down, it wasn't being applied.
Public IDs:
The public ID in my test reference XML file is: <!DOCTYPE reference PUBLIC "-//OASIS//DTD DITA Reference//EN" "reference.dtd" [
The four public IDs in the DITA1.1-BigPage-Reference-FM entry in structapps.fm (in the Entity Locations section) are:
-//OASIS//DTD DITA Reference//EN
-//IBM//DTD DITA Reference//EN
-//OASIS//DTD DITA Composite//EN
-//IBM//DTD DITA Composite//EN
Do you see anything wrong with the above? .
Directory Structure:
Maybe I cloned the application incorrectly? Here's what I did:
1. In C:\Program Files (x86)\Adobe\AdobeFrameMaker10\Structure\xml, I copied the folder called DITA and pasted it into the same directory. I renamed this folder DITA-BigPage
2. Inside DITA-BigPage, I opened the app folder. Inside each subfolder in app, DITA-Reference-FM, for example, I opened the edd file in Framemaker. In this case, the edd file name was reference.edd.fm.
3. I edited the top line of reference.edd.fm. It originally said:
Structured Application: DITA1.1-Reference-FM.
I changed it to say:
Structured Application: DITA1.1-BigPage-Reference-FM
4. I saved the EDD file. Then I opened the template file in the same folder. It was called: reference.template.fm.
5. In reference.template.fm, I first changed my page size: Format Menu > Page Layout > Page Size > Tabloid > Set.
6. Then I imported the element definitions from the corresponding EDD file: File > Import > Element Definitions > reference.edd.fm > Click Import > Click OK to dismiss verification message.
7. I repeated the above process for all topic-type folders. For the maps types, I did not change the page size, as these will never display as topics in my online help. I did nothing to the dtd folder.
8. Once all this was done, I opened structapps.fm. I did the following to all Dita1.1 elements in the structure tree.
Selected the Dita 1.1 XMLApplication element, for instance, the one named Dita1.1-Reference-FM, copied it, and pasted it underneath the original element.
The original first few lines in the clone looked like this:
Application Name: DITA1.1-Reference-FM
      Template:              $STRUCTDIR\xml\DITA\app\DITA-Reference-FM\reference.template.fm
      DTD:                       $STRUCTDIR\xml\DITA\app\dtd\reference.dtd
      Read/write Rules: $STRUCTDIR\xml\DITA\app\DITA-Reference-FM\reference.rules.fm
      DOCTYPE:              reference
I changed these lines to look like this, using your suggestion to create a variable for the first part of the URLs to enable speed and accuracy:
       Application Name:      DITA1.1-BigPage-Reference-FM
               Template:                    $STRUCTDIR\xml\DITA-BigPage\app\DITA-Reference-FM\reference.template.fm
               DTD:                            $STRUCTDIR\xml\DITA-BigPage\app\dtd\reference.dtd
               Read/write Rules:        $STRUCTDIR\xml\DITA-BigPage\app\DITA-Reference-FM\reference.rules.fm
               DOCTYPE:                    reference
I also changed the "Filename" URLs in the "Entity Locations" section of this XMLApplication clone from $STRUCTDIR\xml\DITA\app\ to $STRUCTDIR\xml\DITA-BigPage\app\. Applying the "BigPage" variable I'd created for this purpose made this go quickly.
Finally, after this didn't work the first few times I tried it, I got suspicious that the structapps.fm file in my AppData folder (in my case, it was in the Roaming subfolder under the usual Adobe directories) was overriding the modified structapps.fm file in the Framemaker program directory so I replaced the one in AppData (it had all the original settings) with my modified version. This had no effect, unfortunately.
That was my process. After doing the above, the Dita1.1-BigPage applications all listed in the Set Structured App drop-down. They just didn't work,when applied to my XML documents. Nor did the application "remember" what structured application I had set when I opened a new xml document or closed/reopened the current document or closed/reopened the application. Did I place the directories correctly for Framemaker 10? This is the way I did it for FrameMaker 9 and it worked successfully.
As much as I'd love to solve this mystery, I've thought of a workaround I can fall back on that doesn't involve using a cloned application. I will change the page size of a few of the original Dita1.1 sturctured application templates to tabloid size, but leave the Topic structured application at letter size. I'll then apply the Topic structured application to my PDFs and use the others for my help topics. I'll set this up now. If this doesn't work, then I'll know there's a much bigger problem at the base of this, perhaps even something to do with changing page sizes in templates.

Infrared Receiver for 1st gen iMac G5 to work with Remote?

Hello,
My girlfriend gave me a new Apple Remote control but I don't have an infrared reciever in my first generation iMac G5.
Can I get external ones, will they work, where can I get them at a reasonable price (I'm a poor student).
All the best and thanks for the help
Joseph

Thanks for the comments,
I'm not worried about it working with software etc (I have Front Row - best
not say how I got it). My experience of using Macs has taught me that
additional software for running peripheral devices isn't usually required.
I was hoping for information about buying an external IR reciever that could
work through a USB socket or something. I've checked and haven't been able
to find one and thought you guys might know where (online) I might be able
to pick one up.
So there's an IR Reciever in the iPod Dock? If I got one of those could it to operate Front Row or just the iPod?
Joseph

Problem ,working with UNTIL TIME..

hi
i have a serious problem when issuing UNTIL TIME commends.
Such as this command in RMAN:
run {
backup
(archivelog from time '02-OCT-06 09.00.00'
until time '03-OCT-06 21.00.00');
or working with UNTIL TIME in point-in-time recovery .
it gives me this error:
ORA-01830: date format picture ends before converting entire input string
i have had this problem for a long time and i haven't found a solution for it.
i will be grateful if anyone can help me beat this problem

Try this:
run {
set until "to_date('01-10-2006','dd-mm-yyyy')";
Best Regards
Krystian Zieja / mob

Router Problem - Works with Windoze, Linux, but not with Mac

I can't seem to get any router to work with my Mac.
I've tried a Linksys 'b' router, a Netgear 'g' router and a Belkin 'g' router.
No joy.
When I connect my Mac directly to my cable modem (Motorola Surfboard), there are no issues. When I connect the router in between, the Mac pulls the proper ip address and I can ping the router, but I can't get any further. If I try to ping an outside ip address (such as the 4.2.2.2 dns) I get the error message "ping: sendto: Cannot allocate memory". [Does anyone know what this message means?]
A second computer (IBM NetVista) connects reliably using Windoze XP. The same machine, booted in CentOS also connects reliably (after disabling the firewall).
Note, these are all wired connections. I'm not even trying to use wireless yet. The cables all check out, since they all work in other configurations (the Mac->router cable is the same one I use for Mac->Surfboard, and the router->surfboard cable works when connecting from the NewVista machine.
I thought the Mac problems might be firewall related. I had "Brickhouse" installed,but it has since been removed. My network settings no long advise that there is any firewall software in place (previously Sharing > Firewall was greyed out with message that other firewall software was installed). Sharing > Firewall now reports "Firewall Off".
I know the routers work, since I can connect from the NetVista machine. I know the cables are good, because they all work in other configurations. I know the Mac is seeing the router, and the router is seeing the Mac because a correct ip address is pulled. I can even communicate between the machines (ftp,ssh) but I can't get internet access using the Mac through the router.
Oh yeah... one other oddity. When I have personal web sharing enabled, an attempt to access the router setup page at 192.168.1.1 fetches the local server index.html page instead of accessing the router. When web sharing is off, I get a "you are not connected to the internet" message.
Any insight?

Very strange indeed!
Only 2 suggestions at this point...
Get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, then when the prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Try dragging these files to the Desktop & Reboot...
/Users/nnnn/Library/Preferences/com.apple.internetconnect.plist
/Library/Preferences/SystemConfiguration/preferences.plist
/Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
/Library/Preferences/com.apple.sharing.firewall.plist

Working with remote application

Hello everyone ! I installed the remote app on my iPad 2 to work with Apple TV3.
And the application does not recognize the apple TV3. But the application detects the iTunes on my
computer.
What should I do to app detects the apple tv?
Thank you very much

No, you can't automatically suspend the App. My suggestion would be to navigate the user to a specific page in your App when the connection is lost. There you'd place a button that would allow them to try and reconnect to the server. If the reconnection
succeeds you'd simply return them to the Startpage of your App. If it doesn't you simply stay on the reconnection page, e.g. "connection interrupted - please check your connection and try again". If the user does not want to try again they can simply
leave the App via the Home/Back Buttons (in case of the Back Buttons you'd likely want to clear the Backstack first).

Ipad bluetooth keyboard not working with remote desktop

My clients ipad bluetooth keyboard works any other time, just not when connected to his servers via the remote desktop. PC Windows 7 Servers.
I'm trying to get the keyboard information, but any ideas?

Are you using an app like LogMeIn Ignition to access your servers? I believe that LogMeIn Ignition requires you to tap a little keyboard button near the bottom of the screen to activate use of the keyboard (that's how it works in Splashtop Remote, can't be much different in LogMeIn Ignition.)
Are you sure the app you have supports blue tooth keyboard support with remote desktop? (not sure if they have to, I just recall seeing this in Splashtop patch notes awhile ago.)
HuskieN.

Problems working with events in JInternalFrames

Hi everybody:
I'm having a problem with Swing, I have a JFrame with two JInternalFrame's,
I add the MouseListener's to work with the events MousePressed and MouseReleased and it simply doesn't work at all.
Next you can see a fragment of my program, please tell me what I'm doing wrong.
Thanks in advance.
public class PicoPintador extends JFrame {
private JDesktopPane desktop;
private ventanaMonitor Monitor = new ventanaMonitor();
private XYLayout xYLayout1 = new XYLayout();
public PicoPintador() { /* THE CONSTRUCTOR */
super("PicoPintador");
try {
jbInit();
} catch (Exception e) {
e.printStackTrace();
public static void main(String[] args) { /* THE MAIN METHOD */
PicoPintador picoPintador = new PicoPintador();
picoPintador.setVisible(true);
private void jbInit() throws Exception {
desktop = new JDesktopPane();
setContentPane(desktop);
setContentPane(desktop);
this.getContentPane().setLayout(xYLayout1);
this.getContentPane().add(Monitor,
new XYConstraints(30, 20, 230, 245));
JInternalFrame PrimerDibujo = new JInternalFrame("Archivo 1");
PrimerDibujo.getContentPane().setLayout(xYLayout1);
PrimerDibujo.setResizable(true);
PrimerDibujo.setClosable(true);
PrimerDibujo.setMaximizable(true);
PrimerDibujo.setIconifiable(true);
PrimerDibujo.setSize(300,300);
PrimerDibujo.setVisible(true);
this.getContentPane().add(PrimerDibujo,
new XYConstraints(30, 20, 230, 245));
PrimerDibujo.setLocation(50,50);
/* ADDING MOUSE THE FIRST LISTENER */
Ventana.add(PrimerDibujo);
PrimerDibujo.addMouseListener(
new MouseAdapter(){
public void mousePressed(MouseEvent evt){
Monitor.setTEvento("Mouse Pressed");
/* ADDING MOUSE THE SECOND LISTENER */
PrimerDibujo.addMouseListener(
new MouseAdapter(){
public void mouseReleased(MouseEvent evt){
Monitor.setTEvento("Mouse Released");
/* THE CLASS ventanaMonitor */
public class ventanaMonitor extends JInternalFrame {
private JLabel tEvento;
private JLabel evento;
public ventanaMonitor() {
try {
jbInit();
} catch (Exception e) {
e.printStackTrace();
private void jbInit() throws Exception {
setClosable(false);
Container ContentPane= getContentPane();
ContentPane.setLayout(null);
tEvento = new JLabel("Evento");
evento = new JLabel();
ContentPane.add(tEvento);
ContentPane.add(evento);
tEvento.setBounds(10, 80, 110, 15);
evento.setBounds(140, 80, 110, 15);
evento.setBorder(BorderFactory.createLineBorder(Color.BLACK));
setSize(300,300);
setVisible(true);
setLocation(250,50);
}

nothing wrong with the fragment you posted (except you don't need to add the listener twice)
here's you code (stripped of the XYlayout and monitor stuff - you're only adding the listener to PrimerDibujo)
compile/run/click the mouse - works OK
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
class PicoPintador extends JFrame {
private JDesktopPane desktop;
public PicoPintador() {
super("PicoPintador");
try {
jbInit();
} catch (Exception e) {
e.printStackTrace();
public static void main(String[] args) { /* THE MAIN METHOD */
PicoPintador picoPintador = new PicoPintador();
picoPintador.setVisible(true);
private void jbInit() throws Exception {
setSize(800,600);
desktop = new JDesktopPane();
setContentPane(desktop);
setContentPane(desktop);
JInternalFrame PrimerDibujo = new JInternalFrame("Archivo 1");
PrimerDibujo.setResizable(true);
PrimerDibujo.setClosable(true);
PrimerDibujo.setMaximizable(true);
PrimerDibujo.setIconifiable(true);
PrimerDibujo.setVisible(true);
PrimerDibujo.setBounds(50, 50, 300, 300);
this.getContentPane().add(PrimerDibujo);//,
PrimerDibujo.addMouseListener(
new MouseAdapter(){
public void mousePressed(MouseEvent evt){
System.out.println("Mouse Pressed");
PrimerDibujo.addMouseListener(
new MouseAdapter(){
public void mouseReleased(MouseEvent evt){
System.out.println("Mouse Released");
}

Working with 'News Portlet'

Hi,
I wish to keep a news portlet in my Home Page.
This portlet must go through all the features of content management....like it must have content writers..and editors who will edit and approve the news and publisher(Admin) who will publish the news according to the schedules and will expire the content by keeping the expiring dates....
My Question is i kept my Home Page as as a PAGE in some 'xyz' page group....and i need to maintain the work flow flow for this particular news portlet....so can u suggest me how to achieve the work flow...i know a page group can maintain work flow like approval and notifications....but how to keep and maintain all thease in a smart way...
i will be thankfull for ur kind reply...
Thanks&Regards
Prasad

Krishna,
I think your questions go beyond the scope of what we can cover in this forum. If possible, I recommend that you get some training on the Portal product or work with Oracle Consulting to help you draft out an approach to managing and publishing your content. What you want to accomplish (if I understand it correctly) is not difficult, but may take a little experimentation with various Portal features before you hit on the right approach for your needs.
Very briefly, you can try these things:
- Managing and publishing your content on the same page - this is the easiest approach and perhaps the best place to start
- Managing your content on one page and then publishing that page as a portlet on your home page. This is also very simple. The two pages can be in different page groups. Content that is pending approval will not show up in the portlet.
- Using a custom search portlet to display the content on the home page: Using the custom search portlet, you can display any content that you want. For example, selecting all items where the category = "News" with a publish date of today. The content can be managed anywhere, even on multiple pages. The search portlet will aggregate the content from across the repository. Again, the search portlet will only show approved content which the current user is authorized to see.
- Finally, you can build a custom portlet that queries the content repository views to select any content that you want and display it any way you want.
Also, if you are just getting started I suggest that you upgrade to 9.0.2.6.
Regards,
Jerry
PortalPM

Problems working with jdeveloper 9i

The connection I made to olite is correct, but when I run my application , there's is an unexpected internal error I/EX 311. I know there are some limitations working with olite. What can I do?

Mark:
I would strong suggest upgrading to the 9.0.3 production of BC4J. It seems like you're running into re-entrancy problems many of which have been fixed in 9.0.3.
If the problem persists even after upgrading to 9.0.3, run your app with diagnostic turned on. Capture the exception stack, including that for the detail exception and post it.
To turn on diagnostic, you need to include -Djbo.debugoutput=console as a JVM switch.
Thanks.
Sung

Problems working with Oracle Lite

I have read that there are some limitations working with olite. What can I do to solve them, when I work with Buissness componentes?

I am having a similar problem, where I couldn't connect to Oracle 8i database (817). I am getting a error message when I tried to use Packaging Wizard -> Snapshot -> Import -> Username/password and jdbc:oracle:oci8:@connect string or jdbc:oracle:thin:@host:1521:Sid
The error message is 'No Suitable Driver. Make Sure the Proper JDBC drive for "jdbc:oracle:oci8i:@<connect string>" is in the classpath"
I would appricated if someone can send me any help on this.
My email address is [email protected]
Thanks
Joshua

Facing problem working with remote portlets

Similar Messages

Maybe you are looking for