Failed hard drive, re-installing...

My hard drive failed about 1 month ago and i'm re-installing everythning now... FIRST... I can't remember where do 3rd party plugins belong, meaning what folder on my drive. I'm just re-installing everything to be sure, mainly SampleTank & Spectrasonics Trilogy. SECOND... When i navigate to my Logic folder by way of >users>home>library>application support>logic, it contains different data than if i go by
selecting the Volume in finder>library>app. support>logic... all the data info such as channel strip settings, samples and the such are in the second route, but my autoload song is in the first... what now, which is it? If anyone can help that would be great. Thanks

I can't remember where do 3rd party plugins belong, meaning what folder on my drive
You don't have to know: the installer knows - unless you're installing everything yourself manually, in which case the rule of thumb is:
• what gets installed system-wide [for all users] belongs to the local domain, at the root of the boot volume: /Applications, or /Library, or whatever...
• what gets installed for a specific user belongs to the user domain, i.e. ~/ [shorthand notation for /Users/you>.
So plug-ins are generally [but this is not compulsory] installed in the local domain - typically /Library/Audio/Plug-Ins/Components - while your autoload file should be located in your own library folder - and the same is true for the channel strip settings, presets or EXS instruments you created for yourself...
This file system is designed so that everything would work the same whether it's in the local or user domain: it's all about sharing between users instead of duplicating common files.

Similar Messages

  • I am attempting to replace a failed hard drive on a F500 Vista laptop. I have a home premium recover

    I am attempting to replace a failed hard drive on a F500 Vista laptop. I have a home premium recovery DVD (1 of 1) and It runs the recovery after a while of loading, and it creates a 24GB partion and loads about 2.6Gb of information on it. the it ejects the disc and asks if I have any suplimental disks, which I don't have. Then it reboots it's self and cycles through reboots for 5 hours, yes I let it do this for 5 hours as the HP site says it could take several hours.
     After this I finally shut down the computer and loaded the hard drive in an ext case and retrieved the above information. I also note that the 250GB drive is shown as a 24GB drive, so I guess it hasn't completed the partions?
    I never get to a Vista window.
    This hard drive does pass the laptop's Bios hard drive check (the former 80GB drive did NOT) and was used to store Old Time Radio shows, until I went to a larger drive.
    The Laptop has a dual core Athlon TK-53 processor and the recovery disc is for 32 bit Vista (and the label in front and license on back don't state Vista 64, just Vista)
    So, Do I need a Vista 64 recovery disc? Should I download the available driver on the HP site and slap in that disc when the Recovery disc finishes and asks for supplimental discs? Might thngs indicate other issues with the laptop?
    I've loaded from scratch XP several times, but this is my 1st Vista experience. Thank you for any help!

    Okay. So I was able to install, and format the new internal HD. Was able to install Lion then Mavericks.  Next, is to try to retrieve my data from my failing old HD.  I bought an enclosure (sled), and have my HD hooked up to my laptop, and it finally showed up in Finder.  So.  Now.  What is next?  I am seeing a screen that shows these folders:  Applications (translate for the PC me = Programs), Library (I am assuming?? these are my various files such as docs, photos, music, etc.) System, opt, and Users.  Should I just try to drag and drop some/all of the folders onto my desktop, then open up the folders and do something with the contents?  Sorry to sound so vague and frankly, rather dumb-sounding, but the nomenclature with a Mac is a bit different than with a PC, and Finder is a little different looking to me than Windows Explorer.  I am relieved to see that I was even able to get this failing drive to show up in the first place, so I feel a little like I could be on borrowed time with it.  I think it may just be bad sectors, since I don't hear any clicking or other mechanical issues with the drive as it spins.  But, any further help with retrieving the data would be VERY much appreciated!!

  • Replacing a failed hard drive on a mid-2007 white macbook

    Replacing a SECOND failed hard drive on a mid-2007 white macbook (Intel core duo 2.16GHz), this time on my own
    Need to purchase a serial ATA drive, but I keep reading that trying to format and/or partition the drive for use with the original Tiger install disk is unsuccessful and that I would have to update to a newer OS before I can do that.
    I have Leopard as the current OS, and that is in my backup files from Time Machine, but I do not have a disk with Leopard.
    Wondering the best course of action and/or if someone had success wit ha particular Serial ATA using the Tiger disks
    Thanks!

    All Intel Macs have always use SATA drives, so all Intel versions of OS X support them including Tiger. I don't know what you've been reading. However, since you have Leopard I don't see what the problem would be because you don't need to install Tiger unless your Leopard disk is strictly an updater disc.
    How to replace or upgrade a drive in a laptop
    Step One: Repair the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Step Two: Remove the old drive and install the new drive.  Place the old drive in an external USB enclosure.  You can buy one at OWC who is also a good vendor for drives.
    Step Three: Boot from the external drive.  Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears.  Select the icon for the external drive then click on the downward pointing arrow button.
    Step Four: New Hard Drive Preparation
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID  then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Step Five: Clone the old drive to the new drive
    1. Open Disk Utility from the Utilities folder.
    2. Select the destination volume from the left side list.
    3. Click on the Restore tab in the DU main window.
    4. Check the box labeled Erase destination.
    5. Select the destination volume from the left side list and drag it to the Destination entry field.
    6. Select the source volume from the left side list and drag it to the Source entry field.
    7. Double-check you got it right, then click on the Restore button.
    Destination means the new internal drive. Source means the old external drive.
    Step Six: Open the Startup Disk preferences and select the new internal volume.  Click on the Restart button.  You should boot from the new drive.  Eject the external drive and disconnect it from the computer.

  • Failing hard drive or ??? of FOUR new laptop?

    FOUR brand-new Toshiba Satellite C50 laptops - Windows 7
    Steps taken:
     Setup
     Uninstall Norton Security Essentials trial
     Install, update, and scan with Microsoft Security Essentials
     Uninstall Norton Backup trial and Norton Anti-Theft
     Download, install and setup Internet Explorer 11
     Google Toolbar
     Windows updates: 70
     Burn 5 recovery DVDs Verbatim DVD-R 
    Check Windows logs
     On 3 of the 4 computers an average of 10 warnings for EACH OF most DVD burned: “an error was detected on device \device\cdrom0 during a paging operation”; Event ID 51, Source CDROM
     CHKDSK finds on all of them about 80,000 files and
                        over 200 unused index entries from index $SII
                        over 200 unused index entries from index $SDH
    Memory Diagnostics Tool: no error detected
    My search on the Web gives conflicting responses.
    Should I be concerned about failing hard drive on all four brand-new computers?
    Or is there another issue?
    Thank you.

    please provide the full model number of your computer(s).  it is printed on the bottom.
    I'd run chkdsk on them again until I received no errors.  or return them for exchange/refund.
    L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

  • Replacing a failing hard drive with a new Hard

    Hey Apple Community,
    So I have a failing hard drive in my mid-2009 Macbook Pro. I can't boot it up in regular mode any longer, and only can boot it in Recovery HD. I cannot repair the disk, so I guess my only option is to replace the hard drive.
    I decided against paying our local experts upwards of $300 to run diagnostics and install a cheap, new HD.  I did find a new 1TB SSHD, which I ordered and plan on installing myself.
    My question is, with a NEW hard drive in the computer, can I still boot it in Recovery HD mode to do an installation of OS Yosemite? Or do I have to figure out how to obtain an external copy (on a USB drive for example) of OSY and install that somehow when I install the new HD?
    Thanks in advance for your help! -MJ

    mjwindett wrote:
    ...My question is, with a NEW hard drive in the computer, can I still boot it in Recovery HD mode to do an installation of OS Yosemite? Or do I have to figure out how to obtain an external copy (on a USB drive for example) of OSY and install that somehow when I install the new HD?...
    On recent Macs, Recovery comes in two flavors with one being Internet Recovery which doesn't require a bootable drive to start with. Yours doesn't have that, so the other flavor is the Recovery partition on the failing HD you currently have.
    What you can do is get an external enclosure, such as this one, install your new SSHD in it, connect it to your MBP, boot into Recovery and run Reinstall OS but with the external drive as the target. Once that's done, and you've tried booting from it, you can install the SSHD in the MBP, install the current HD in the external enclosure, and see if you can use Setup or Migration Assistant to move your files over to the SSHD.

  • I have seen so much response about the Mountain Lion update slowing down computers.  I am updating from Mac OS x 10.6.8.  What can I do to ensure the upgrade will go fine?  Do I unplug my external hard drive before installing, or keep it plugged in?

    I have seen so much response about the Mountain Lion update slowing down computers.  I am updating from Mac OS x 10.6.8.  What can I do to ensure the upgrade will go fine?  Do I unplug my external hard drive before installing, or keep it plugged in?
    Also, I have the 08 version of iWork. Will this cause problems for the update?  Can I update this AFTER I update the processor?

    Welcome to Apple Support Communities
    There's no reason to think that Mountain Lion will slow down your Mac. Just make a backup of your data before upgrading with Time Machine > http://support.apple.com/kb/HT1427
    Also, check that your apps are compatible > http://www.roaringapps.com Upgrade them to a compatible version or delete them before upgrading.
    The external drive won't make the OS X Mountain Lion installer fail, but it's better to unplug it during the upgrade.
    iWork '08 is compatible with Mountain Lion. iWork '09 includes OS X Mountain Lion features and can be purchased at the Mac App Store.
    To upgrade to OS X Mountain Lion, I recommend at least 4 GB of RAM. You can check how much memory you have in Apple menu > About this Mac

  • Unable to boot from hard drive or install dvd

    Out of the the blue my powerbook won't boot up. I've tried to reset the PRAM, I've tried to verbose thing but all it said was that it couldn't establish a connection to the windowserver. I've even tried to power on holding the option key but the hard drive and install dvd both have x's on them. What can I do to get this thing working again?

    Have you tried rebooting in safe mode? Failing that, have you tried rebooting from the install disc so you can run Disk Repair? For either of these tests, insert your system disc and follow the instructions here: http://support.apple.com/kb/TS1417
    Good luck!

  • How do I remove one failing hard drive from raid set and replace with new one

    Last Friday apparently one of my raid drives started failing.
    As I mentioned on this forum I started getting continous beeping.
    I was finally able to get the raid working at a degraded level.  I ordered a replacement hard drive which is arriving today.
    (In the meantime I made twice daily backups of my work.....)
    Below was the message I got from the browser based raid software:
    Blahblah 09    1000.2GB   RaidSet Member SamSung HD103SJ
    Blahblah 10    1000.2GB     Free                 SamSung HD103SJ
    Blahblah 11    1000.2GB   RaidSet Member SamSung HD103SJ
    Blahblah 12    1000.2GB   RaidSet Member SamSung HD103SJ
    (See this earlier thread if you wish!)
    http://forums.adobe.com/thread/727867?tstart=0
    At one point when I did the checked the browser interface I saw the message Failed and Degraded
    As I said, I was able to work over the weekend on the degraded system.
    This morning I got the beeping again and did the rescue and now I am running a "full raid" without the notice that one raid was "Free".
    In any case, the new hard drive is arriving today.
    What steps should I take to incorporate the new drive into the raid system.
    I have one OS drive
    and 4 tb raid drives.   One needs to be replaced with the new one that I am getting today.
    Thanks
    Rowby

    Harm,
    Regarding your comment:
    Re: How do I remove one failing hard drive from raid set and replace with new one
    Please tell me how to read the serial number from an individual drive rather easily, without un-installing them:
    If you select the proper drive to change out, you only need to remove one drive and look at its serial number...
    Step 1: Identify bad drive serial number using Areca's tools
    Step 2: Turn off the computer
    Step 3: Remove what you think is the bad drive based on following your numbered cable method, marked hot-swap bays, whatever
    Step 4: Verify that the serial number matches the "bad drive" serial number from step 1; if it does great, proceed; if it does not match, go back to step 3
    Step 5: Change out the CORRECT drive - that's the bottom line for this whole procedure
    Cheers,
    Jim

  • Replaced failed hard drive - access is slow with spinning ball

    Hi,
    I recently replaced my failed hard drive and during the OS install, selected a backup from Time Machine.
    All's well. My apps and docs are all there.
    However, when I double click on the HD icon on the desktop, I get a spinning ball for about 3-5 seconds before I get a contents window.
    Is there something I should NOT have copied over from Time Machine that has caused this behavior?
    The new HD is a 7200 rpm(?) Western Digital Caviar, 1 TB. Details from System Profiler:
    ST31000528AS:
    Capacity: 1 TB (1,000,204,886,016 bytes)
    Model: ST31000528AS
    Revision: CC35
    Serial Number: *****
    Native Command Queuing: Yes
    Queue Depth: 32
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk1
    Rotational Rate: 7200
    Bay Name: Bay 1
    Partition Map Type: GPT (GUID Partition Table)
    S.M.A.R.T. status: Verified
    Volumes:
    Main Drive:
    Capacity: 999.86 GB (999,860,912,128 bytes)
    Available: 539.26 GB (539,261,030,400 bytes)
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk1s2
    Mount Point: /
    Thank you for any help!
    Greg
    < Edited by Host >

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Failed Hard Drive

    Macbook Pro 17" Early 2011
    Notes. Failed HDD ASD Test.
    A new hard drive was installed in September of 2011 after the previous hard drive failed.
    Having worked well until now the system seems to give the same problems as it had previously.  I am wondering if this is a compatibility issue as others have pointed out.
    I have been told by the technician my only option is to replace the entire hard drive again for the second time with a new one. However to my understanding a ASD test is very specific and this my not be necessary?
    Some clearing up of the above would be thoroughly appreciated.
    Further I am attempting a final backup just in case.  Any tips to make sure I don't have to take it in where I could just back it up myself without the system shutting down.

    If you're running OS X 10.7.x - Mavericks, boot into your Recovery partition (hold down the command and R keys whilst booting) and you'll see a screen like this:
    Click on the Disk Utility icon and then select your boot disk from the column on the left. Once highlighted, click on the "Verify" button. If your disk needs to be repaired, you'll get red text telling you that your disk needs to be repaired. If you get this message, click on the "Repair" button. If the disk can be repaired, it will be. If the disk cannot be repaired, you'll get a message telling you the same. In the latter case, you would need a new hard drive.
    Good luck,
    Clinton
    MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

  • Failing hard drive, unable to start, trying to back up data

    My apologies in advance, I'm not terribly computer saavy.
    I purchased an HP Pavilion dv6-1350 us Notebook PC in May 2010 from Newegg.com as my home computer. 
    About 2 weeks ago I fell asleep with the computer on (internet connected via dial up) and when I woke up, I was getting hard drive failure imminent warnings and warnings to back up my data.  I ran several tests as per what directions the computer could give me and got the following results:
    Start up test failed
    Hard disk smart 301
    Hard disk 1 QUick 303
    100% system memory OK
    4,156,358,656 bytes OK
    Hard disk 1 QUick (303)
    I purchased some larger USB memory sticks to recover my data on, but unfortunately, the computer cannot start up and I cannot back up my data before I send the computer for service.  (I'm assuming the hard drive needs replacing). 
    However, I am slightly suspicious because the error message has an odd grammatical error, something to the effect of "hard drive failure imminent, to avoid not data loss, back up files immediately'. 
    Unfortunately I cannot offer any further details at this time as I am at work and the computer is at home.
    So my questions are:
    is this a hard drive failure or a nasty viral/computer takeover?
    is there anything I can do start the computer enough to back up my data before getting the computer serviced?
    does anyone have suggestions as to where I should get an HP serviced?
    Thank you in advance for your time and assistance.

    Hi,
    Well 301 and 303 are genuine error codes relating to the Hard Drive ( so it will need replacing ) - I presume the tests you ran were from the Bios menu, if that is correct, it's unlikely to be Malware as bios viruses are extremely rare so it probably is just a grammatical error in the message, nothing more.
    One possible way to try and retrieve your files from a non-booting drive is to follow the process detailed in the link below.  The Ubuntu operating system CD you create can run from the CD alone ( ie it doesn't have to install on the Hard Drive ) and I've often found it to be successful in retrieving data even from a failing Hard Drive.  When you've created the CD, follow the instructions and see if you can back up your existing files to the USB drives you've purchased. 
    http://www.howtogeek.com/howto/windows-vista/use-ubuntu-live-cd-to-backup-files-from-your-dead-windo...
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

    After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

    The best thing to do would be to start over. Use Setup Assistant this time.
    Boot into Recovery, launch Disk Utility, and erase the startup volume. This operation will destroy all data on the volume. Quit Disk Utility and install OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
    When you reboot, you'll be prompted to go through the initial setup process. That’s when you transfer the data from one of your backups. For a walkthrough, see here:
    Using Setup Assistant
    Don't transfer the Guest account, if it was enabled on the old system.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.

  • Failed hard drive, no OS disk, no boot dvd

    HI All,
    My hard drive failed.  I tried disk utility and it says that something is wrong with the boot sector.  I was able to get some files off of it before Full failure, but now it just spins and does nothing.
    I bought a new SSD to use, but I cannot for the life of me get it started!
    I have no OS on a cd, dvd, boot drive or anything.
    Here is what I did. I am hoping someone can help me
    1) Using another macbook pro, I formatted my SSD to Mac OS X extended
    2) Using my failed MBP, I put the new SSD into the hard drive bay.  This was not recognized by the system.
    3) I put the failed hard drive back into the drive bay, hooked up both my time machine backup drive and my new SSD to the USB ports.
    4) I was able to restore the time machine backup to the SSD (hooked up via USB. PErfect! I see all my files!
    5) I then removed the SSD from the USB and  installed the SSD into the hard drive bay of the laptop and booted up. Nothing. Flashing folder again.
    Can someone please tell me what I did wrong?  Why isnt the SSD being recognized when I put it in the hard drive bay!??

    No one? 

  • Could this be a failed hard drive?

    My daughter bought a new 20 GB gen 3 iPod in August of 2004. Now, when she turns it on, she gets the sad face along with a triangle and exclamation point. She has followed the steps in the Apple KB article for this scenario here and I have tried to help her - but all is to no avail.
    A reset does not fix the problem. We have tried to restore it. But when the iPod is put into disk mode and attached to her computer, the iPod does not show up anywhere. It is not recognized by iTunes or iPod Updater. When the iPod is removed from the computer, the computer gives a message saying that the device was not recognized and asks if we want to re-initialize. (Curiously, it does not ask that while the iPod is attached.)
    After the last attempt at this, we could hear the hard drive of the iPod trying to repetitively spin up, about every 3 or 4 seconds. It wouild spin up and stop, spin up and stop, etc. At least, it sure sounded like the hard drive to me.
    If anybody can shed some wisdom on this, I would appreciate it. My opinion is that there has probably been a hard drive failure. Has anyone experienced similar symptoms? And if so, what was the solution? If this is a hard drive problem, I am disappointed that it did not last more than 16 months. Are there any statistics anywhere about the lifetime of these devices?
    Thanks,
    Rich
    EMAC G4 1.0 GHz   Mac OS X (10.3.9)  

    You might try a PRAM reset and see if this does any good.
    http://support.apple.com/kb/HT1379?viewlocale=en_US
    It sounds like the hard drive itself is toast based on how it looks in an enclosure. So you won't be able to boot from it. Possibly after a PRAM reset you could option boot to a disc or to your external drive.
    I had the experience of a failed hard drive totally messing up my PowerMacG4, and it took some doing to get it going again. I finally got it going again, and it has been working ever since without issue.
    The MBP is a different machine, but having experienced first hand what a dying hard drive could do, I think it's well worth doing any resets you can.
    If no joy, make an appointment at the genius bar and ask them if they can run a hardware test from their store feed. If you do have other issues, they should show up then.
    If you end up being able to boot to the optical drive, you could try running the extended version of the Apple Hardware test yourself.
    Good luck!

  • Can Time Machine back up a failed hard drive, and how long will it take to prepare?

    1. The hard drive in my 2009 MBP has failed. My Time Machine external drive failed about three weeks ago, and I don't know if I'll be able to restore from it. Is it ever possible to backup a failed hard drive with Time Machine? The machine boots, it just comes up beach balls if I use any applications for very long.
    2. I'm trying to back it up right now. I have Time Machine running to a new external drive. It has been stuck on "preparing backup" for about 20 minutes. Everyone says that preparing a first backup takes some time, but no one says if "some time" is 15 minutes or one hour or more. What is a typical length of time for preparing first backup? At what point should I walk away?
    If it's not worth trying to back this drive up myself anymore, I'd love to just drop the thing off and get the hard drive replaced -- but if it's worth doing, I'll take the extra day to back up what I can.

    You might have better luck using a clone.
    Clone  - Carbon Copy Cloner          (Often recommended as it has more features than some others)
    Clone – Data Backup
    Clone – Deja Vu
    Clone  - SuperDuper
    Clone - Synk
    Clone Software – 6 Applications Tested
    Commonly Used Backup Methods

Maybe you are looking for

  • Linux on my X220T (and why it failed)

    I’m sorry but this is going to be a long post but I have seen so many posts out there from people in my position - making an attempt to migrate from Windows to Linux - that I felt compelled to share my experiences. This is not a Linux bashing post ei

  • Loading data from text file into ListBox

    I have data in a text file that I want to load into a listbox... I have fully mastered handling strings and arrays so I'm going to need some help... I was wondering how do I get flash to load a text file that contains the data below.. and display it

  • Connecting MacBook Pro to Television

    I've got a 2GHz Intel Core Duo MacBook Pro and I am looking to connect it to my 32' Visio LCD. If I go online the only DVI to HDMI cables do not seem to be compatible with my DVI slot. Will Apple still have some of these older cables in stock in some

  • Call Transaction "MIGO" in display mode only

    Hi friends, I have changed the standard the SAP standard program MB51 to a Customer Program 'ZMB51' based upon the user requirement.Iam able to get all the values (output) Now my requirement is .... iam trying to call transaction "MIGO" when the user

  • External Number Error in MM01

    Dear Gurus, I tried creating a new material A00001212 in MM01 (Material Master Record), Select material type HAWA, press enter. System keeps displaying or the systems changes A00001212 in to material 99990 and error shows  " Number 99990 not defined