Failed: the PowerPC architecture is no longer supported
On my PB running 10.7 in the terminal when I type ruby - v I get
Launch of "ruby" failed: the PowerPC architecture is no longer supported.
Yes the PB is old but it is a core 2 and ruby was installed with system...
So I did go and do a new install and I have a working copy of Ruby... the reason for this adventure is to get rails running so I need Gems:
RubyGems 1.8.25 installed
== 1.8.25/ 2013-01-24
RubyGems installed the following executables:
/opt/local/bin/gem
myke$ gem -- version
Launch of "RosettaNonGrata" failed: the PowerPC architecture is no longer supported.
myke$ which gem
/opt/local/bin/gem
myke$
This is the current version ... I am perplexed
Similar Messages
-
I am getting the PowerPC applications are no longer supported error, so I downloaded Libreoffice and can not find it on my hard drive anywhere. It did say it would install to Applications, but it's not there. How do I find it and can I put it in my dock?
In Safari's preferences:
Look in the folder displayed where you see the arrow. The actual Downloads folder is found in your Home (user) folder. -
i upgraded to lion when it first came out but today i tried to open my photoshop cs2 and its telling me the powerpc applications are no longer supported is there any fix out there for this
Lion is Not compatible with PPC (Power PC) based software, such as your older version of PhotoShop. Your choices are you can either upgrade to the newer version of PhotoShop, or you can backup your data and apps, erase your harddrive and reinstall Snow Leopard.
Hope this helps -
I have installed Lion and Microsoft Office 2011. I want to uninstall Office 2004, but of course I cannot run the application to uninstall, because I get the "PowerPC applications are no longer supported" message. Suggestions?
Go to this microsoft site http://support.microsoft.com/kb/312172 and/or this microsoft site http://support.microsoft.com/kb/2398768. I would suggest removing both to start with a clean slate. I had some problems with installing Office for Mac 2011 over 2008 and found out that by completely removing both and starting from a clean slate provided the best solution. Kappy is correct but some sniglets do get left behind. Hope this helps. Cheers.
-
thx
That's what it means. The program cannot be run on your Mac. It is old PowerPC code. You need to get a version that will run on an Intel-based Mac.
-
Safari and the App store icons are both deactivated. I also cannot a software update check, as it gives the 'PowerPC applications are no longer supported error'
Very frustrating, cannot do anything with this laptop now. Any help is greatly appreciated.If you don't already have a current backup, back up all data. There are ways to back up a computer that isn't fully functional. Ask if you need guidance. You can skip this step if you don't care about the data that hasn't been backed up.
Reinstall the OS.* Your data should be unaffected unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later. -
I have a disc for Final Draft 7 screenwriting software. My attempt to use it today failed because "PowerPC applications are no longer supported." I don't even know what this really means. Can anyone please tell me how to work around this or get those applications supported (as they must have been before)? Thanks.
PowerPC was the processor type for Macs prior to 2006. It was coded in a way that is not compatible with the 2006 and later Intel-based Macs. To ease the transition, Apple included a way for the OS to "translate older programs coded for PwoerPC Macs so they would run on Intel Macs.
This lasted about six years. PowerPC Support for pre-Intel Mac software, which through OS 10.6.8 was handled by Rosetta emulation, disappeared with OS 10.7 in 2011.
You either need to upgrade Final Draft to a version that supports Macs with Intel Processors, or use your current software on an older Mac. -
PowerPC applications are no longer supported
I'm trying to install Ofiice:mac 2004, but it shows that the PowerPC applications are no longer supported. How can i fix this problem?
x236 wrote:
I'm trying to install Ofiice:mac 2004, but it shows that the PowerPC applications are no longer supported. How can i fix this problem?
If you are unable or unwilling to update to Office 2008 or 2011, you can install Snow Leopard Server (with Rosetta) into Parallels or VMWare Fusion and continue to use Office 2004 (and most other PowerPC applications) concurrently with Lion or Mt. Lion:
[click on image to enlarge]
Snow Leopard Server is now available from the Apple Store for $19.99 + sales tax & shipping: 1.800.MYAPPLE (1.800.692.7753). Apple Part Number: MC588Z/A -
I am running Lion (OS X 10.7.4) and trying to reinstall iLife06, a .mpkg file, using Installer.app. I get a message "You can't open the application iLife06.mpkg because PowerPC apps are no longer supported." Is there a work around?? Thanks in advance for any help that can be provided.
The only workaround would be to purchase the current version of iLife apps from the App Store.
Lion doesn't support the old PowerPC architecture anymore, which is what iLife '06 was written for.
If the internal apps are universal, right-click on the mpkg and choose Show Contents. Then, dig through and run the specific installer package for each application. -
New MacPro 10.9.4 purchased three weeks ago included Keynote. App worked fine. New update for Keynote was released August 21. Just downloaded the 6.2.2 update. Tried to launch app and now get error message "You can’t open the application “Keynote.app” because PowerPC applications are no longer supported." Confused as to why it worked prior to update. Nothing else has changed. No issues with recent iMovie, Pages or Numbers updates. Any ideas?
I tested this:
Reinstalled Aperture 3.1 from the Trial Installer.
In some way it seems to be working. But the whole thing is a scary Chimera.
It can create an Aperture library. I can import and edit images, even in Graphic Converter ias an external editor.
But the Media Browser does not show the aperture Library that I created.
The versioning is inconsistent. The library appears as an Aperture 3.4 library in the Finder. Aperture 3.5 seems to be able to read this library and to upgrade it to 3.5
The Applications folder is showing the application as version 3.4 and as compatible. Spotlight is showing it as illegal.
When opening the chimera Aperture, I see plenty of warnings in the Console window:
An Aperture "Hang" report
xpcproxy assertion failed
com.apple.IconServiceAgent: main failed to composite image
quicklookd: Warning
and more ... the hang was critical. I had to force quit Aperture more than once.
So be careful. I would not trust any important Aperture library to this patched application, without testing thoroughly. Be careful with your precious photos. -
I keep getting error message, "can't open application PACE because PowerPC applications are no longer supported." I've run Clean My Mac and I still get the error.
Use the Finder "Go" menu while holding down the option key to expose your User / Library folder.
Look in the Application Support folder for PACE items and delete them. -
When trying to setup my external hard drive, I get this box that pops up and says this:
You can’t open the application “LaCie Setup Assistant” because PowerPC applications are no longer supported.PowerPC was a type of processor used in Mac systems before Apple switched to Intel-based processors. These older chips required applications to be coded differently, to the extent that they will not run on the Intel processors in newer Macs. Apple used to include a translator that allowed these programs to at least run, but this translator is no longer available so if you run into an older PowerPC-based program then OS X will give you this error.
-
I installed Lion 10.7.4. Went to use Photoshop Cs and got a popup window. You can't open the application Adobe Photoshop CS because PowerPC applications are no longer supported. Is there a way of getting this to work or do I have to get newest version of all of my Power PC apps?
Welcome to Apple Communities
PowerPC applications are unsupported in newer versions. You can upgrade Photoshop or you can install Snow Leopard in a partition.
1. Open Disk Utility (Applications > Utilities) and select your drive
2. Go to Partitions tab, press + button, create a new partition and press Apply
3. Insert the Snow Leopard install DVD and reboot pressing C key
4. Install it in the new partition
5. If you want to change boot, go to System Preferences > Startup Disk and select 10.7 -
Shortly after upgrading to version 10.7, I installed an application that was not compatable with the LION operating system. The application was for an external Maxtor hard drive that appearantly was intened for an earlier Mac operating system.
Now I get the popup "You can't open the application NotificationExec because PowerPC applications are no longer supported" about every 10 seconds.
How to I get rid of this.
There is nothing to Force Quit. The process (if it is a process) does not show up in Activity Monitor. I have also tried to use the KILLALL command but no process is found by that name.Absolutely frustrated by the same problem, just lost 3 hours of my day trying to uninstall after getting the same error message. The ONLY thing that worked for me was going to the following Maxtor (Seagate) URL:
http://knowledge.seagate.com/articles/en_US/FAQ/199931en
I downloaded their "remove maxtor sw.zip" file
Click here to download the remove_maxtor_sw.zip file and store it on your system's desktop.
And it worked perfectly. Took 10 seconds and - after restarting - it was done.
What a waste of the day!!! -
Please help with the message I am receving on startup ""You can't open the application NovamediaDiskSupressor because PowerPC applications are no longer supported."
I have read some of the replies in the Apple Support Communities, but as I am no techie, I would have no idea how I would implement that solution.
Please help with what I need to type, how, where, etc.
Many thanks
AppleSueIn HunterCreekI am afraid there is no solution.
PowerPC refers to the processing chip used by Apple before they transferred to Intel chips. They are very different, and applications written only for PPC Macs cannot work on a Mac running Lion.
You could contact the developers to see if they have an updated version in the pipeline.
Maybe you are looking for
-
'''bold text'''
-
My ITouch won't sync after update, it says "Apple Mobile Device not started" ??
After I updated ITunes to 10.5.2, I try to sync my IPod and a box pops up and says "This Ipod cannot be used because the Apple Mobile Device service is not started. Has anyone had this problem too? I don't understand what I have to do...
-
Hi i need to include an imagen in my report, but i can't create an extra dynpro for it. Let me explain: When you execute your report and you have a write sentence, the report launches a new screen with the text you have written. But this screen is no
-
E-63 what type are Alarm Clock Tones for the clock
when try to set the alarm clock tone for the clock if I try to change Tone for alarm I only get optios for Download Default or off. What type of tones do I need to download lor do they have to be in a special folder Thanks Message Edited by douggg
-
Hello, I'm trying to generate a client for a WS. The WSDL come from a aspx file. I have generate code with JDeveloper 9.x, but was missing to much class. I have generate code with WSDL2JAVA with eclipse.. I was missing information too, So i upgraded