Failed to execute MDX query. Reason: returned server error (). (IES 10901) (WIS 10901).

Hi,
I am trying to create a Webi report based on an OLAP Universe. I am using BI 4.1 SP01
I did the following:
1. I have setup a databse connection for SAP SSM via the create connection wizard in the Universe Design Tool. My connection is created sucessfully.
2. Next I created a Universe saved it and exported it.
3. In webi I am trying to create a report, I selected a couple of measures in the "results objects" section. In the qurey filters section I selected month.
When I run this query, I am getting an error message: Database error: Failed to execute MDX query. Reason: returned server error (). (IES 10901) (WIS 10901).
I tried to search for similar issues reported on SCN forums and other places and it looks like a generic error and this was not answered in some of the discussions
Any help is very much appricated.
Thanks
Imtiyaz

Hi,
I have verified in BEx query properties, it's "allow External Access to this Query" is checked.
I have filter in BEx query, so not need to had it to query selection again in webi report.
Could any other solution??
Regards,

Similar Messages

HTTP server code 500 reason Internal Server Error explanation Error during

Hi,
I am trying to connect to SAP TM (Tranportation Management) System using HTTP adapter using PI 7.0.The scenario is
ECC ->PI->SAP TM. I have configured HTTP adapter as the receiver with addressing type as HTTP Destination. I have created a RFC destination of type H pointing to SAP TM on PI. I have encountered the following error after executing the scenario.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>Error during parsing of SOAP header</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP server code 500 reason Internal Server Error explanation Error during parsing of SOAP header</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks,
Kiran

Error during parsing of SOAP header
Can you mention what are the settings done in Receiver HTTP channel.....the request that you send to target is not in proper format.
One reason could be incorrect Content Type.....is it text/XML ?
Regards,
Abhishek.

HTTP server code 500 reason Internal Server Error

HI,
I am getting following error in Call Adapter
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>Internal Server Error</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP server code 500 reason Internal Server Error explanation Internal Server Error</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have a Business system that is sending the material master data to a different Business System via XI. The message is received by XI correctly. XI correctly performs the transformation and identifies the message interface and selects correct receiver for the message. XI communicates with the receiving business system via the appropriate communication channel.
The message "fails" in the receiving system with the following error:
HTTP server code 500 reason Internal Server Exception explanation Error parsing of SOAP header.
The channel is using HTTP Adapter type, and i cross checked the communication channel details like Addressing type, target host, service number, path, user name, user password.......each and every detail is correct.
Please help me out to find the solution to the problem.
Points will be gladly awarded.
Edited by: Ashish Soni on Sep 24, 2008 9:02 PM

try sending the same XML message picking from moni and check whether you are getting same error or not?
if you get same error then check at web server for logs there you can find exact error.

The Imap command UID copy (to deleted messages) failed for the mailbox "bulk mail" with server error UID copy mailbox in use. PLease try again later

The Imap command UID copy (to deleted messages) failed for the mailbox "bulk mail" with server error UID copy mailbox in use. PLease try again later

What program are you using? And what version?

Failed to execute default file manager (input/output error) After Firefox Reset? [Any more help? you guys/gals rule!]

after resetting firefox it seems I cant open anything from the menu as i get the above error msg.

Are you using ubuntu? [http://askubuntu.com/questions/42682/failed-to-execute-default-file-manager-input-output-error]

TS3276 The IMAP command "UID COPY" (to Deleted Messages) failed for the mailbox "Bulk Mail" with server error: UID COPY Mailbox in use. Please try again later.

I have been getting the following message and have no idea how to clear it. Any help will be greatly appreciated!!! I have force closed Mail, and have tried to re-sync my accounts but no luck.
The IMAP command “UID COPY” (to Deleted Messages) failed for the mailbox “Bulk Mail” with server error: UID COPY Mailbox in use. Please try again later.

What program are you using? And what version?

Converting MDX query into SQL Server 2008

We have MDX query based OLAP CUbes.
To reduce MDX based dependenies, we have to convert MDX based cube to sql server 2008 based queries.
For this I need expert advise to convert below query to sql server 2008 based query :
CREATE MEMBER CURRENTCUBE.Measures.[Ack Lost]
                    AS 'Sum(PeriodsToDate([Time].[Year], [Time].CurrentMember ), [Measures].[Lost])',
                    FORMAT_STRING = "#,#",
                    VISIBLE = 1;

Hi Sachin,
According to your description, you need to convert the MDX query to T-SQL query, right?
Your MDX query is calculated measure that return the total value from the first sibling and ending with the given member. In T-SQL query we can use the query as Yogisha provided to achieve the same requirement. Now you need to a tool to convert all the MDX
related SSAS cube queries to MS SQL Server 2008 based queries.
Although MDX has some similarities with T-SQL these languages are in many ways different. Beginning to learn and comprehend SQL Server Analysis Services (SSAS) MDX queries can be difficult after one has spent years writing queries in T-SQL. Currently, there
is no such a tool to convert a MDX query to T-SQL query since the structure difference between MDX and T-SQL. So you need to convert them manually, please refer to the links below to see the details.
http://www.mssqltips.com/sqlservertip/2916/comparison-of-queries-written-in-tsql-and-sql-server-mdx/
https://sqlmate.wordpress.com/2013/11/12/t-sql-vs-mdx-2/
http://technet.microsoft.com/en-us/library/aa216779(v=sql.80).aspx
Regards,
Charlie Liao
TechNet Community Support

Trigger points for 'Execute before query' in obiee server

Hi
Can anybody tell me when the sql given in the 'Execute before query' ( Connection Pool and go to the Connection Scripts tab) will be executed. Is it overtimes we do a query? Can we have any control over it?
Thanks a lot
Regards
Raj

Hi,
You might want to check the NQQuery.log to see the code that it is running before making a connection. Just to confirm that the connection pool step is working fine, could you try with a simple select statement and see that it does not error out. If it does not, you may want to revisit the procedure code again. I understand from the error that it is expecting something after the END statement (kind of weird though!!). I assume in this case, it could not parse that this is a stored procedure call itself may be. One thread I found is http://stackoverflow.com/questions/4270818/ora-06550-and-pls-00103 which you may want to look for the line break characters.
Hope this helps.
Thank you,
Dhar

Webi Reports failing -Cannot execute empty query

Intermittent problem affecting all Webi reports in the SAP BI system .
This affects all Release 1 and Release 2 Webi reports
When the user tries to run the report, an error message appears with the message "Cannot execute empty query. (QTJ00521)"
User can close the report and try to run it again - the report may execute properly the second time.
This problem started in production at R2 go live. It is affecting both R1 and R2 webi reports.
It cannot be reproduced in lower environments.

Hi,
Check attached SAP note if this is relevant for your issue.As per this SAP note this happens when query stripping option is checked.If this is checked then uncheck and try.
1936256 - Error "Cannot execute empty query. (QTJ 00521)(WIS 00000)" when refreshing Web Intelligence report
Amit

Event reports fail to execute (ora-00942, new install, database error?)

This is my first time working with Oracle software, and I am trying to use the Sensor Edge Server to test an RFID implementation. I am using OAS and SES 10.1.3.1 with Database 10.2.0. I followed many guides, I believe the database install instructions were from the database documentation library, and the OAS/SES instructions from the flash demo found here:
http://www.oracle.com/technology/products/sensor_edge_server/tutorials.html
My initial installation did not link to the Data repository, so I used manual configuration instructions from here:
http://www.oracle.com/technology/obe/1013/fusion_middleware/integration/ses/manualconfig/manualconfig.htm
At certain points I had to enter the SQL commands manually to ensure the Edge user's password was set, but all the outputs were as expected.
Now that all this was done, I used the simulator with a simple xml file (as in the example) and confirmed it was loading via the "Monitor Events" tab in the SES. When I went to the "Event Reports" tab, the "Fetch Results" button caused an error message reading "Unable to Process Request / The query failed to execute: ORA-00942: table or view does not exist"
In the log, sometimes I catch "OracleArchiverWorkerImpl: Cannot insert event into SDR:>>"
and "java.sql.SQLException: ORA-06550: Line 1 Column 7: PLS-00201: identifier 'EDG_SDA.ON_EVENT" must be declared"
I've done a fair bit of searching through the whole forum (not just the RFID area), checked on the 00942 error and so on, but what I've done wrong isn't jumping out at me. Anyone care to give input?
Thanks sincerely,
Andrew

To clarify, I used the sql*plus instructions:
   sqlplus edge/<password>@<service_name>
   select count(*) from edg_event_vw
   select count(*) from sda_observationsfrom the server guide and both inititally returned "2", and made no updates, despite resetting devices (causing events in the "monitor events" tab)
Andrew
Message was edited by:
user582280

Failed to execute default file manager (Input /Output Error) [SOLVED]

I'm having an issue in XFCE where the default Terminal, Browser and File Manager launch correctly - but with this error:
Failed to execute default [file manager] [terminal emulator] [browser]
Input /Output Error
I have the requisite "Preferred Application" set as Chrome/Thunar/xfce4-terminal.
If I run
exo-open --launch FileManager
From terminal, it says:
[1] 4281 segmentation fault (core dumped) exo-open --launch FileManager
Remember, it launches the app successfully - and the apps themselves launch correctly, it's only exo-open that I have a problem with! Everything else works great on this system.
Last edited by yochaigal (2015-04-28 11:10:06)

demolitions wrote:
I got the same problem, I observed the problem appearing with those lines in "dmesg", the same library (libpthread-2.21.so) is also present in other software errors (critical and not) since my last update (friday 24th).
I'll try downgrading glibc, see if that works around the problem.
[ 587.042204] traps: xfce4-terminal[1022] general protection ip:7f6500100150 sp:7ffe14c978d8 error:0 in libpthread-2.21.so[7f65000ee000+18000]
[ 592.113288] traps: xfce4-terminal[1026] general protection ip:7fbf1c97a150 sp:7ffe2f916188 error:0 in libpthread-2.21.so[7fbf1c968000+18000]
[ 620.913826] traps: xfce4-notifyd[494] general protection ip:7fa4859a2150 sp:7fff84dd7708 error:0 in libpthread-2.21.so[7fa485990000+18000]
[ 974.008983] traps: xfce4-terminal[1384] general protection ip:7f519df84150 sp:7ffe3573e4f8 error:0 in libpthread-2.21.so[7f519df72000+18000]
[ 974.850083] traps: xfce4-terminal[1387] general protection ip:7f6ed57f8150 sp:7ffec58369c8 error:0 in libpthread-2.21.so[7f6ed57e6000+18000]
[ 975.521687] traps: xfce4-terminal[1390] general protection ip:7f5e91d00150 sp:7ffd70179d18 error:0 in libpthread-2.21.so[7f5e91cee000+18000]
[ 979.179030] traps: exo-open[1393] general protection ip:7fbdd2a24150 sp:7ffe9e0c5608 error:0 in libpthread-2.21.so[7fbdd2a12000+18000]
[ 984.286944] traps: exo-helper-1[1395] general protection ip:7fd5d8473150 sp:7ffd53706a08 error:0 in libpthread-2.21.so[7fd5d8461000+18000]
[ 1012.318773] traps: xfce4-terminal[1502] general protection ip:7ffb62b1b150 sp:7fffd5c986f8 error:0 in libpthread-2.21.so[7ffb62b09000+18000]
[ 1101.456187] traps: xfce4-terminal[1521] general protection ip:7f3285cf2150 sp:7fff3c6df158 error:0 in libpthread-2.21.so[7f3285ce0000+18000]
[ 1102.120447] traps: xfce4-terminal[1525] general protection ip:7fdd50c3a150 sp:7ffe96656ce8 error:0 in libpthread-2.21.so[7fdd50c28000+18000]
[ 1103.246180] traps: xfce4-terminal[1529] general protection ip:7f93f2b49150 sp:7ffc539d34e8 error:0 in libpthread-2.21.so[7f93f2b37000+18000]
[ 1103.976302] traps: xfce4-terminal[1532] general protection ip:7f6a55204150 sp:7ffd13eb77f8 error:0 in libpthread-2.21.so[7f6a551f2000+18000]
[ 1118.718286] traps: xfce4-terminal[1953] general protection ip:7efc94fb9150 sp:7ffd6f5fbed8 error:0 in libpthread-2.21.so[7efc94fa7000+18000]
[ 1160.851856] traps: xfce4-terminal[1992] general protection ip:7f39aaddb150 sp:7ffdb4478aa8 error:0 in libpthread-2.21.so[7f39aadc9000+18000]
[ 1165.279367] traps: xfce4-terminal[2004] general protection ip:7f3a50756150 sp:7ffd743c07b8 error:0 in libpthread-2.21.so[7f3a50744000+18000]
[ 1173.696850] traps: xfce4-terminal[2008] general protection ip:7f0930b98150 sp:7ffc5cd54e78 error:0 in libpthread-2.21.so[7f0930b86000+18000]
[ 1177.567234] traps: xfce4-terminal[2011] general protection ip:7f5ea2222150 sp:7ffd81d4e898 error:0 in libpthread-2.21.so[7f5ea2210000+18000]
Tried downgrading glibc from 2.21-3 to 2.21-2 as this is the package which contains libpthread.so, and on my other arch workstations I don't have the issue, but to no avail, same error box pops up when using exo-open, and my IDEs are not starting.
I'll try comparing installed packages versions on both workstations.

Behance plugin fails to publish to WIP. Returns following error: "Failed to upload a WIP update to Behance: Invalid permissions or request type"

Behance plugin fails to publish to WIP in Lightroom 5.6. Returns following error: "Failed to upload a WIP update to Behance: Invalid permissions or request type". (I also saw this question asked in the Deutsche forums in Jan 2014 with no answers)
In Behance settings Adobe Photoshop Lightroom has permission to:
Revoke Access
may act on your behalf to comment, follow users, view and appreciate projects
Allows access to read network activity feed
Able to read collections you have marked as private
Ability to create, manipulate and delete your collections.
Able to read works in progress marked as private
Able to post, manipulate and delete a work in progress on your behalf
Does anyone have a solution?
-------- System Settings ---------
Lightroom version: 5.6 [974614]
Operating system: Windows 8.1 Business Edition
Version: 6.3 [9600]
Application architecture: x64
System architecture: x64
Logical processor count: 8
Processor speed: 3.0 GHz
Built-in memory: 16301.9 MB
Real memory available to Lightroom: 16301.9 MB
Real memory used by Lightroom: 374.4 MB (2.2%)
Virtual memory used by Lightroom: 346.3 MB
Memory cache size: 224.4 MB
Maximum thread count used by Camera Raw: 4
System DPI setting: 96 DPI
Desktop composition enabled: Yes
Displays: 1) 2560x1440
Installed Plugins:
1) Behance
2) Canon Tether Plugin
3) Costco Photo Center
4) Facebook
5) Flickr
6) Leica Tether Plugin
7) Nikon Tether Plugin
Config.lua flags: None
Adapter #1: Vendor : 8086
Device : 412
Subsystem : 5b01028
Revision : 6
Video Memory : 0
Adapter #2: Vendor : 10de
Device : fe4
Subsystem : 5b01028
Revision : a1
Video Memory : 7c1
Adapter #3: Vendor : 1414
Device : 8c
Subsystem : 0
Revision : 0
Video Memory : 0
AudioDeviceIOBlockSize: 1024
AudioDeviceName: Speakers (Realtek High Definition Audio)
AudioDeviceNumberOfChannels: 2
AudioDeviceSampleRate: 44100
Build: Uninitialized
CardID: 1042
Direct2DEnabled: false
GPUDevice: D3D
MaxTexture2DSize: 8192
OGLEnabled: true
Renderer: Intel(R) HD Graphics 4600
ShaderModel: 11.1
Vendor: Intel
VendorID: 32902
Version: 8086:0412:5b01028:0006

Behance Plugin for LR not Authorizing in LR 5.6

Exchange 2010 Initialization failed (Initialization failed) The WinRM client received an HTTP server error status (502)

i have Server 2008 r2
exchange 2010 evrything was working fine but now when i try to open the Exchange management console i get this errore
the follwing error ocurred when serching for on premises exchange server
Connecting to remote server failed with the following error message:
The WinRM client received an HTTP server error status 502, from the remote ws-managment servic For more information, see the about_Remote_Troubleshooting Help topic. It was running the command
'Discover-ExchangeServer -UseWIA $true -SuppressError $true'.
please help
Mahmoud Hanefy

Anything in the event logs?
Any help from:
http://msexchangeteam.com/archive/2010/02/04/453946.aspx
Troubleshooting Exchange 2010 Management Tools startup issues

Exchange 2010 Initialization failed: The WinRM client received an HTTP server error status 500

Good morning,
I have major problems with exchange 2010 this morning.
First off, exchange stopped sending and receiving any emails- whether internal or external. We are running a server 2008 R2 domain and exchange 2010 is installed on a Server 2008 virtual machine.
I tried simply rebooting the server and then tried logging on and getting into the Exchange Management Console. I receive the following error in the exchange management console:
Initialization failed
The following error occurred while attempting to connect to the specified Exchange server 'exchangesvr.chs.internal';
The attempt to connect to
http://exchangesvr.chs.internal/Powershell using "Kerberos" authentication failed: Connecting to remote server failed with the following error message: The WinRM client received an HTTP server error status (500), but the remote service did not include any
other information about the cause of the failure. For more information, see the about_Remote_Troubleshooting Help topic.
I followed the steps listed here:
http://technet.microsoft.com/en-us/library/ff607221(EXCHG.80).aspx
but everything appeared to be correct. I did not have to make any changes because everything was set as it should be according to that information.
Any help would be much appreciated.
Best regards
Katrina

Hi,
I had the same problem, and I spent a weekend looking a solution, fortunally, I have it:
Please follow this steps:
Install WinRM IIS Extension, adding this feature from Server Manager.
Change  IPv4 over IPv6 lookup preference, because the FQDN fails to find the server on TCP/IPv6.
To verify this, on Command Prompt please make this test: ping yourserver.yourdomain.domain.
Maybe you obtain TCP/IPV6 address response.
Probably the Internet Information Services (IIS) Manager dont have the binding for IPv6, only for IPv4.
To change IPv4 over IPv6 lookup group prefence, follow this steps:
Please open regedit, locate the skubkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters\
On DisabledComponents subkey, double click, change de value for
0x20 (or 4120 Hexadecimal). this value make  the Windows OS to prefer IPv4 over IPv6.
Repeat the test, on command prompt:
ipconfig /flushdns (Enter) to flush DNS cache.
ping yourserver.yourdomain.domain.
At this moment you obtain TCP/IPv4 address response.
To check Exchange Managment Console operation, you must restart the server.
Please restart the server.
          Best Regards,

Fails when executing job called syspolicy_purge_history (SQL Server 2012)

Hi friends i have the following problem
The job syspolicy_purge_history of my database engine failed, specifically on the third step called "Erase Phantom System Health Records" that executes a powershell. This is the sentence that executes (All job syspolicy_purge_history
on any SQL 2012 has the same code):
if ('$(ESCAPE_SQUOTE(INST))' -eq 'MSSQLSERVER') {$a = '\DEFAULT'} ELSE {$a = ''};
(Get-Item SQLSERVER:\SQLPolicy\$(ESCAPE_NONE(SRVR))$a).EraseSystemHealthPhantomRecords()
. When i see the job history i get the following:
Message
Executed as user: NT Service\SQLSERVERAGENT. The job script encountered the following errors. These errors did not stop the script: A job step received an error at line 1 in a PowerShell script. The corresponding line is 'import-module SQLPS -DisableNameChecking'.
Correct the script and reschedule the job. The error information returned by PowerShell is: 'The specified module 'SQLPS' was not loaded because no valid module file was found in any module directory. ' A job step received an error at line 2 in
a PowerShell script. The corresponding line is '(Get-Item SQLSERVER:\SQLPolicy\SRV01236$a).EraseSystemHealthPhantomRecords()'. Correct the script and reschedule the job. The error information returned by PowerShell is: 'Cannot find drive. A drive with the
name 'SQLSERVER' does not exist. ' A job step received an error at line 2 in a PowerShell script. The corresponding line is '(Get-Item SQLSERVER:\SQLPolicy\SRV01236$a).EraseSystemHealthPhantomRecords()'. Correct the script and reschedule the job.
The error information returned by PowerShell is: 'You cannot call a method on a null-valued expression. '. Process Exit Code -1. The step failed.
Aditionally i tested putting the policies in powershell like unrestricted (like i see on a blog). but it didn't work.
My SQL version is 2012 Standard SP1 X64
Please help me with this
Thanks for your help
Greetings
Aleds

Thanks for your help princekumar8 and gona_david
Hello Gona_david, You are right, when i execute the powershell sentence Get-Module -ListAvailable
the SQLPS module doesn't appear.
Look i have another SQL Server 2012 in another server, but this is patched on SP2 and the syspolicy_purge_history here runs OK. Also when i execute the powershell, the SQLPS appears in the list.
So, my question is: If i patch my server SQL Server 2012 with the error from SP1 to SP2, is Possible that the error will get away? In fact, Wouldn't be yet necessary runs the SQL install?
Basically what you recommend me in this case?
Thanks in advance
Greetings
Aleds

Failed to execute MDX query. Reason: returned server error (). (IES 10901) (WIS 10901).

Similar Messages

Maybe you are looking for