Failed to install informatica 9.1 database used is oracle 12c

i hav  e installed 12c database and trying to install informatica, but it fails error is check the database user name and password. its not connecting with any of the database user accounts.
any suggestions, plz reply me. thanks in advance
krishna

user10588351 wrote:
hi,
while i'm installing 12c the pdb check box was enabled and i left it as it is and i didn't create any service entries specifically for pdbs, but the database was successfully installed.
later that i created an user as in the specified format like c## username identified by username it was created and connected in sql*plus too i checked it. but whats the wrong is while installing informatica it will asks for database connectivity .....write? then i'm giving this database credentials but that informatica installation tool is even unable to contact the database.simply it is throwing an error :- the username and password are incorrect and unable to connect to the database. plz reply me any thing you got helpful
thanks & regards,
krishna
But you didn't say if you connected to the CDB or the sample PDB nor did you say which component of Informatica you are trying to install (server, repository, client, etc).
It sounds like you haven't completed the Informatica pre-installation steps because part of that is to create a DB user account for the domain configurations and to set the port numbers to use for the node and domain services. So as I said above:
If you can complete step #4 above and connect manually and use the DB manually then your problem is with Informatica and you need to post there.
Since Informatica needs a repository using 'some' database you need to make sure you design your architecture before you just start installing things. For Oracle 12c you will want to use PDBs and not start creating tables and application code in the root.
You need to review the installation requirements for the Informatica component you are trying to install and verify that you meet those requirements.
You should also repost the question in an Informatica forum and verify that Informatica actually supports Oracle version 12c.

Similar Messages

  • Firefox Mobile 4 beta 3 (and pre-beta 4) fails to install on Archos 101 Tablet using Android 2.1 Eclair with no specific error.

    Firefox Mobile 4 beta 3 (and pre-beta 4) fails to install on Archos 101 Tablet using Android 2.1 Eclair with no specific error. Is this a know issue or has someone been able to successfully install?

    Sorry, we haven't tested Firefox on this device yet, and we aren't sure why it isn't working. If anyone (especially with Android development experience) would like to help us debug this problem, please start by creating an account and submitting a bug report at: https://bugzilla.mozilla.org/
    Thanks for the report.

  • How to repair the database used by Oracle Identity Manager 11g

    Hi friends,
    I have a question about Oracle Identity Manager 11g.
    As I can repair the database used by Oracle Identity Manager 11g
    Thanks

    I think you can do if the repaired database is replica of old one.
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/repair.htm

  • Failed to retrieve data from the database using Crystal Reports XI R2

    I am using Crystal reports XI R2 and using the Universal Web Connector (connecting to Coghead).  When I put some some of the fields from the database and run Preview I get "Failed to retrieve data from the database." .   Where is this message coming from and how can I track down what the issue is?

    Hi Jamie,
    When you are trying to Browse Data of a field it is not poping up any window menas, it is unable to interact with database and get the data from database.
    Try to create a new report using ODBC with Xtreem Sample Database.  If you get the data in your report without any error then your connector is not working / unable to pull the data into your report.
    You can find the supported platforms document in below link
    http://support.businessobjects.com/documentation/supported_platforms/xi_release2/default.asp
    Thanks,
    Sastry

  • Deleting/dropping/removing database using Enterprise Manager  (12c)

    Hi,
    I have run some searches and review the documentation... but I haven't found any way to drop/remove/delete databases using 12c EM.
    We have multi-instance environments (one physical server with several instances/database). And from time to time we have to remove one or more instances when they are decommissioned.
    So far we are using DBCA, but I wonder if there is any way to do the same with EM "out of the box ...
    Could someone point me in the right direction?
    Thanks in advance,
    Francisco Palomares

    Hello Francisco,
    the only "out of the box" methods to delete/remove a database would be:
    - Create a "User defined procedure" to do the job - Checkout the "Lifecycle Management" guide in the documentation
    - When using the Self Service Portal as part of the Cloud Management feature, users would be able to request for a database to be created. When requesting for a database to be created the user can also identify for what period he/she would need the database. Meaning that you can indicate the moment a database need to be decommissioned. In that case not only a Job will be scheduled to create the requested database, but also a job will be scheduled to remove the database after the indicated time frame has passed. Check for this the Cloud Management Guide.
    - You could of course also think about doing this using a custom made script that you could schedule from the EM job system.
    Well enough material to think about ;-)
    Regards
    Rob
    http://oemgc.wordpress.com

  • Creating Standby database using Cloud Control 12C

    Hi,
    I want to setup Standby database for my existing RAC database, Both standby and PRimary databases are on 11.2.0.3 and we are using "Cloud Control 12C".
    After specifing and testing the Host creddential and Database credentials and choosing the Backup method when I click next I get following error message
    "Username- The Specified user must own the source database oracle server installation."
    I am giving the host credential as oracle, we use single os user "Oracle" for all our installation and administration.
    This is AIX OS and 11.2.0.3 database installation.
    Any help will be appreciated.
    Regards
    Bhushan

    Guys,
    After searching for 2 days on web and raising question on OTN, in the last we resolved the issue. The issue was registering the primary database with correct oracle binaries.
    We have 2 set of binaries Oracle Infrastructure and Oracle RDBMS, The database was register in 12C with Oracle Infrastructure binaries. I changed that and every thing is working soomth.
    regards
    bhushan

  • Install scripts to create tables used by Oracle Education 8i ILT classes

    Hi all;
    anyone knows how i can get the scripts to load the tables & data used in Oracle ILT 8i classes ?
    Am working thru the practises from the study-guide (SQL & DBA), but does not hve those tables & data to work with.
    Tks & rgs.

    Hi,
    Did /u01/app/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_rakanum.log provide some details?
    Are you using CFS for
    OCR_LOCATION=/u01/shared_config/ocr_configuration
    VF_DISCOVERY_STRING=/u01/shared_config/voting_disk
    What are the perisions? What ls -l produces?
    Regards,

  • Partition failed, re-install Leopard? Can I use Time Machine after?

    I got a Boot Camp error when trying to partition my MacBook after upgrading to Leopard. The error read something like "boot camp failed to partition drive because some files could not be moved, re-install OSX...". Seems to be a relatively common error, some have achieved a work around by not having to do a complete re-install of Leopard by deleting certain files (please share if you have done this). Others just decided to do a complete re-install, that worked fine for them and then they were able to use boot camp and partition...
    My question is, will my MacBook still be partitioned if do the following:
    1. Backup my entire MacBook using Time Machine to my new never used external drive.
    2. Erase and re-install Leopard on my macbook, end up with a fresh Leopard OS.
    3. Partition my my MacBook HD
    4. Use time machine to recover my macbook the way it was before the re-install

    Ok so correct me if I'm wrong here, this is my situation...
    My MacBook has never been partitioned. I recently UPDATED my MacBook with Leopard. I tried to partition the HD with bootcamp and it didn't, the error has something to do with some files that could not be moved. I have an external drive that should be arriving soon that I plan on using with my macbook. I also want to partition my HD to use windows on my macbook.
    Now, my 2 questions. Should I not use Time Machine with my external drive to rely on all my files being returned to me after I erase and re-install Leopard? What is the easiest way for me to get my MacBook to the way it was before I do this erase and re-install. Because erasing right now seems to be the only way for me to use bootcamp and windows on my machine...

  • I have 3 questions,Audio/Video Remote Control HID driver windows 8 fails to install code 32, trying to use usb tether connection rather then using WiFi to connect Laptop and iPhone. can only connect using wifi. Last quest. about the hotspot bar.

    In device manager it shows an error code 32' using iPhone 5 related to Apple Tv I believe is when this started, I am thinking I can DL the file and install
    biut I am not sure how to properly do this.
    Also I use my LTE to tether (paid) to my LapTop as well, The issue I am having, I cannot get the USB to work as a network connection. However using the WiFi method works fine but I rather use the sync cable at times such as when I am charging the phone and/or wishing to not  trainsmit my ssid for others to see even though I do use a password.
    Last question about using the built in WyFi tether connection, Is it posable to remove or ake the annoying blue indicater bar at the top disappear? This blocks from doing certain tasks that forces me to shut off the HotSpot app. to allow me to pull down the info bar at the top, Please Help Thanks

    In device manager it shows an error code 32' using iPhone 5 related to Apple Tv I believe is when this started, I am thinking I can DL the file and install
    biut I am not sure how to properly do this.
    Also I use my LTE to tether (paid) to my LapTop as well, The issue I am having, I cannot get the USB to work as a network connection. However using the WiFi method works fine but I rather use the sync cable at times such as when I am charging the phone and/or wishing to not  trainsmit my ssid for others to see even though I do use a password.
    Last question about using the built in WyFi tether connection, Is it posable to remove or ake the annoying blue indicater bar at the top disappear? This blocks from doing certain tasks that forces me to shut off the HotSpot app. to allow me to pull down the info bar at the top, Please Help Thanks

  • Failed to install drivers in Windows Vista using MDT 2012 update 1

    I am trying to deploy physical machine with Windows vista along with drivers. After completion of deployment i see deployment is successful with no error and warnings, but it still do not install driver in the machine. To test weather i have selected correct
    driver i checked manual installation of drivers and this install the driver in the machine. But the drivers are not installing when i am tried to install driver using MDT. In windows 7 and Windows XP drivers are installed correctly but not in Windows Vista.
    I have shared my log files in one drive. Please look this and tell what mistake i am doing.
    https://onedrive.live.com/?cid=BD291DD4A63B1353&id=BD291DD4A63B1353!107
    https://onedrive.live.com/?cid=BD291DD4A63B1353&id=BD291DD4A63B1353!109
    https://onedrive.live.com/?cid=BD291DD4A63B1353&id=BD291DD4A63B1353!108
    https://onedrive.live.com/?cid=BD291DD4A63B1353&id=BD291DD4A63B1353!110
    https://onedrive.live.com/?cid=BD291DD4A63B1353&id=BD291DD4A63B1353!112
    https://onedrive.live.com/?cid=BD291DD4A63B1353&id=BD291DD4A63B1353!111
    https://onedrive.live.com/?cid=BD291DD4A63B1353&id=BD291DD4A63B1353!114
    https://onedrive.live.com/?cid=BD291DD4A63B1353&id=BD291DD4A63B1353!113

    Can you be specific as to what drivers are not installing? An issue that can be had when doing PNPEnum is that child devices of something that does not have a driver installed are not visible to the PNPEnum. A way to get around that is you can force the
    injection of drivers that are not getting installed. Something like you can add a second Inject Driver step but, have it be a selection profile of drivers that always get missed because they are children.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • How can I connect to the database using the Oracle Remote Diagnostic Agent?

    Now I try to study RDA on Windows XP platform,when I run 'rda.cmd',there is a question 'Enter password for 'SYSTEM@'',what is the answer?
    Because I didn't know how to connect to database,there are many error messages - RDA-00510: SQL execution disabled,What can I do?

    Metalink Note:314422.1 to start
    It is asking you to tell how to connect to 'the database that you are investigating' over a network. The answer .... the password for the userid called 'system' in the database specified after the @
    I am confused ... you do not know how to connect to your database?

  • Adobe Reader 11 MUI failing to install using transform and patch 11.0.10 via cmd/SCCM in one package

    Hello,
    I have all the files, MST and the patch located in one folder. I am trying to use the following MSI command lines locally on my computer before I can attempt to deploy this via SCCM 2012. I am having issues either with the package not compatible or using /p and getting the MSIEXEC help window prompt. I've tried a few command lines:
    msiexec /i AcroRead.msi PATCH="AdbeRdrUpd11010_MUI.msp" TRANSFORMS="AcroRead.mst"
    msiexec /i AcroRead.msi /p AdbeRdrUpd11010_MUI.msp TRANSFORMS="AcroRead.mst"
    msiexec /i AcroRead.msi TRANSFORMS="AcroRead.mst" /p AdbeRdrUpd11010_MUI.msp
    Adding /qn on the end makes the install work silently when not attempting to include the patch, but fails to install it silently when only using the transform file that I have selected in the wizard to silently install.
    We have 5 different versions from 8.0 through 10.0 in our environment of 3000 machines. Sadly this was not managed before...I can easily update our current 11.0 versions that range from 11 to 11.0.09 by only applying the patch to them but need to get the full install working for the 2500 machines I need to target.
    I tried using the /a command which seems to work, but creates program files and common files folders inside my adobe folder on the desktop when executing it from the cmd. Am i suppose to package that folder all in one and then use the /i command to install adobe? I've been researching for a week but finally hit a wall where I dont think I am getting anywhere.
    Thank you in advance,
    Kevin

    I have almost answered my own question as I just came across this link
    https://it-god.co.uk/deploy-adobe-reader-xi-11-0-10-with-sccm-2012/
    This is for the plain reader version, but we use MUI now (due to other languages required in our environmet). I get to the part where it asks to apply the patch to the AIP folder but it fails.
    msiexec /p AdbeRdrUpd11010.msp /a C:\Reader\11.0.10\AcroRead.msi
    I changed this to account for the MUI naming,
    msiexec /p AdbeRdrUpd11010_MUI.msp /a C:\Reader\11.0.10\AcroRead.msi
    But I get the windows prompt that says this package can not be opened, please verify. I ensured that both the patch and base install were MUI versions, and i downloaded fresh copies of each. I also unblocked the patch so that it can run. No luck so far.
    EDIT: Using another guide i found the command line (modified the path to my location) and this worked,
    msiexec /a C:\adobe\Reader\11.0.10\AcroRead.msi /qb /p AdbeRdrUpd11010_MUI.msp TARGETDIR=C:\adobe\Reader\11.0.10\

  • Want to use single oracle home for multiple database releases

    Hi,
    I have following 3 different databases.
    Oracle7 Server Release 7.3.4.4.0
    Oracle Database 10g Enterprise Edition Release 10.2.0.3.0
    Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit
    I want to access these databases using single oracle home. Please advise which client version I have to install to access these. I tried using Oracle Release 9.2.0.1.0 client but I am not able to connect to oracle 7 by using this.I am ready to have multiple oracle homes.But what client version I have to install and where can I get it.Your help will be highly appreciated.

    ... and 7 is using oracle 8.1.7 client.From your sales representative. 8i is no longer available for downloading,because desupported since many years.
    Werner

  • How to hide system tables when using the Oracle SQL Developer?

    Hi,
    I would like to know how can I show only the tables that I created under the Tables tree? I didnt find a way to create a separate database using the Oracle Sql Developer. I see all the tables together, and would like to differentiate between different databases.
    Can anyone explain to me how to do these things?
    Thanks,

    Hi,
    I would like to know how can I show only the tables that I created under the Tables tree? Your posting is not clear,again tell something more on tables tree,what u want to achieve with it.
    How to hide system tables when using the Oracle SQL Developer? if u connected with sys, system or user with dba role then u have a privilege to see these tables,so revoke the privilege/role from ur user to view this tables if ur connected other then sys,system,
    I didnt find a way to create a separate database using the Oracle Sql Developer. DBCA is a tool for creating the new database.
    Kuljeet

  • EBS Install on OEL 5.4 using vmware fails with RC-50004 RW-50010

    Hello ALL,
    I am trying to install EBS R1212 on Linux OEL 5.4 using vmware on windows xp pro and i am getting the below err in Please help...
    I tried the setup with R1212 x86 and R1212 x86-64 on vmware i am getting the same error with both versions... can you please help/assist..
    RC-50004: Fatal: Error occurred in ApplyDatabase:
    Control file creation failed
    Cannot execute configure of database using RapidClone
    RW-50010: Error: - script has returned an error: 1
    RW-50004: Error code received when running external process. Check log file for details.
    Running Database Install Driver for VIS instance
    Processing DriverFile = /home/oracle/EBS/startCD/Disk1
    Thanks,
    Arshad

    Thanks...
    I am installing R1212 i did not find any userful info...
    I am trying disabling oom how to disable it in OEL 5.4 echo “0? > /proc/sys/vm/oom-kill (turn off) there is no such file....
    also i am tying couple of things like...
    # sysctl vm.lowmem_reserve_ratio
    vm.lowmem_reserve_ratio = 256 256 32
    Thanks for very quick reply... I hope it goes through this time..

Maybe you are looking for