Failed to install the new kernel pkg
I just downloaded a new kernel pkg from
archlive-pkg
this is the new kernel pkg I downloaded.
kernel26-snapshot-2.6.31-rc6-git6-i686.pkg.tar.gz
when I ran
pacman -U kernel26-snapshot-2.6.31-rc6-git6-i686.pkg.tar.gz
, it complaint there is a conflict issue~
How can i install the package? thanks!
loading package data...
checking dependencies...
(1/1) checking for file conflicts [#####################] 100%
error: failed to prepare transaction (conflicting files)
kernel26-snapshot-2.6.31: /boot/System.map26 exists in filesystem
kernel26-snapshot-2.6.31: /boot/vmlinuz26 exists in filesystem
kernel26-snapshot-2.6.31: /etc/mkinitcpio.d/kernel26.kver exists in filesystem
kernel26-snapshot-2.6.31: /etc/mkinitcpio.d/kernel26.preset exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/3com/typhoon.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/acenic/tg1.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/acenic/tg2.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/adaptec/starfire_rx.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/adaptec/starfire_tx.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/advansys/3550.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/advansys/38C0800.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/advansys/38C1600.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/advansys/mcode.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/atmsar11.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/bnx2/bnx2-mips-06-4.6.16.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/bnx2/bnx2-mips-09-4.6.17.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/bnx2/bnx2-rv2p-06-4.6.16.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/bnx2/bnx2-rv2p-09-4.6.15.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/cis/LA-PCM.cis exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/cxgb3/t3b_psram-1.1.0.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/cxgb3/t3c_psram-1.1.0.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/e100/d101m_ucode.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/e100/d101s_ucode.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/e100/d102e_ucode.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/edgeport/boot.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/edgeport/boot2.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/edgeport/down.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/edgeport/down2.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/edgeport/down3.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/emi26/bitstream.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/emi26/firmware.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/emi26/loader.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/emi62/bitstream.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/emi62/loader.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/emi62/midi.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/emi62/spdif.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/ess/maestro3_assp_kernel.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/ess/maestro3_assp_minisrc.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/kaweth/new_code.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/kaweth/new_code_fix.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/kaweth/trigger_code.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/kaweth/trigger_code_fix.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/keyspan_pda/keyspan_pda.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/keyspan_pda/xircom_pgs.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/korg/k1212.dsp exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/mts_cdma.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/mts_edge.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/mts_gsm.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/ositech/Xilinx7OD.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/qlogic/1040.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/qlogic/12160.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/qlogic/1280.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/sun/cassini.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/tehuti/bdx.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/ti_3410.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/ti_5052.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/tigon/tg3.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/tigon/tg3_tso.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/tigon/tg3_tso5.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/whiteheat.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/whiteheat_loader.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/yamaha/ds1_ctrl.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/yamaha/ds1_dsp.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/yamaha/ds1e_ctrl.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/yamaha/yss225_registers.bin exists in filesystem
errors occurred, no packages were upgraded.
yunkwan wrote:
bangkok_manouel wrote:another option:
pacman -Rd kernel26-firmware && pacman -U kernel26-snapshot-2.6.31-rc6-git6-i686.pkg.tar.gz
after I run
pacman -Rd kernel26-firmware mkinitcpio
loading package data...
checking dependencies...
(1/1) checking for file conflicts [#####################]
100%
error: failed to prepare transaction (conflicting files)
kernel26-snapshot-2.6.31: /boot/System.map26 exists in filesystem
kernel26-snapshot-2.6.31: /boot/vmlinuz26 exists in filesystem
which pkg else should I remove?
your kernel. i'd recommend you to do that first:
cp /boot/System.map26 /boot/System.map26.old
cp /boot/vmlinuz26 /boot/vmlinuz26.old
in case of problem with your newly installed kernel, edit the grub entry at boot according to the new back-up names above.
then simply:
pacman -Uf kernel26-snapshot-2.6.31-rc6-git6-i686.pkg.tar.gz
also, why has mkinitcpio been removed? reinstall it before installing your new kernel.
Similar Messages
-
Hello,
I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
Failed to install the new preview build, please try again later. 0x80246007
What could be the problem?
Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
for this VM. Now that I have this 80246007 error code.
When looking up System log, the following error messages are listed multiple times:
Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
The errors are returned for the Event ID 20 by WindowsUpdateClient
in task category Windows Update Agent..
I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
registry key as suggested in Windows
Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
"BranchName"="fbl_awesome1501"
"ThresholdRiskLevel"="low"
"ThresholdOptedin"=dword:00000001
Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.
Looks like Setup is having problems installing in a Hyper-V virtual machine.
Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
Any clue why installing under VM causes 9926 to fail?
Thank you in advance.
Well this is the world we live in And these are the hands we're given...Hi,
According to the error message, this problem seems like update package installation failed during system upgrade.
You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
Roger Lu
TechNet Community Support -
Failed to install the new preview build, please try again later. 0xC1900107
I'm trying to upgrade Windows 10 TP for Enterprise to the new build 8460, but I keep getting the error message
Failed to install the new preview build, please try again later. 0xC1900107
I don't find any reference to that error code. I've seen similar reports in the forum, but with different error codes and with the message "Failed to upgrade" rather than "Failed to install". I haven't played with the reg keys on this
system.
The event viewer shows the following event:
Installation Failure: Windows failed to install the following update with error 0xC1900107: fbl_release 9860 Enterprise.
The upgrade to a non-Enterprise device started at the same time went through without problems.
AlbertoHi Russell,
What’s the situation now?
There would be a cause that the upgrade is running background, so a retry would fail in this situation.
You can check the action log in C:\$Windows.~BT\source\panther\setupact.log
Check the time line to see if it is running for upgrade.
Alex Zhao
TechNet Community Support -
Failed to install the new preview build, please try again later. 0x80070032
Hello, I'm trying to update my Windows 10 to the new build and it's not possible in my computer.
In PC Settings\Preview Build I get this error as a result after trying to install the new update:
Failed to install the new preview build, please try again later. 0x80070032
EDIT: After trying the solution posted here: https://social.technet.microsoft.com/Forums/en-US/66f82aff-9411-4c5f-a34f-e3172df32925/preview-build-failed-to-download-0x80246018?forum=WinPreview2014Setup
Now I have different error 0x80240024Hi,
Did you find the error during downloading or installing process? Have you cleared the SoftwareDistribution folder and check the issue again?
It would be better if you can check the event viewer and windowsupdate.log (%windir%\Windowsupdate.log), find related information, upload the log to OneDrive for further analysis.
http://windows.microsoft.com/en-hk/onedrive/share-file-folder
Yolanda Zhu
TechNet Community Support -
Failed to install the new preview build, please try again later 0xC1900204
I upgraded in-place from Windows 8.1 to Build 9926. I am unable to upgrade past 9926.
Windows Update finds the new preview build on both fast and slow rings. It downloads it successfully. Upon attempting to install, it fails.
I get a screen overlay with the message:
Can't update to Windows 10 Technical Preview
Sorry, it looks like this PC can't run Windows 10 Technical Preview. This might be because the Users or Program Files folder is being redirected to another partition.
Closing the overlay and returning to the "Update & recovery" screen, I see the error in red: Failed to install the new preview build, please try again later 0xC1900204Hi Isilverman,
As we have Windows 10 install Media available at hand, might we consider to do a dual boot of Windows 10 and Windows 8.1?
Based on the information you posted, it seems to be that the current Windows 8.1 environment is not suitable to do an Upgrade.
Another thing I would like to share is the information listed in the thread below:
Problems with disk space and installation time in builds 10041
and 10049 of Windows 10 Technical Preview
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Failed to install the new preview build, please try again later. 0x80070003
I am currently running build 9841. When I try to install the new preview build I get the following error
Failed to install the new preview build, please try again later. 0x80070003
I have installed all updates and I am a full administrator of this machine. If someone could fix this I would be very happy.Hi bgelbach,
Have you downloaded the 9879 build?
Before Windows setup runs, it would do some check on perquisites, one thing is space check.
When the new build is downloaded, it is located under C:\windows\software distribution\download
folder, which is about 2.7G. Make sure you have enough space for installation.
If everything goes well, it would extract files to C:\$WINDOWS.~BT folder.
Alex Zhao
TechNet Community Support -
Failed to install the new preview build, please try again later. 0XC190010C - Solved
Does this error code mean that I will receive the new build 9860 update later in time or there is some problem in the current build?
Thank you.Hi RoumenD,
If issue persists, you can share the setupact.log under
$Windows.~BT\source\panther
Here would have some information about failure.
Alex Zhao
TechNet Community Support -
Failed to install the new preview build, please try again later. 0x80070005
Hello,
Im having an issue installing the latest build. Whenever I try I get the following..
My machine is joined to a domain and I have full admin access to the system, I have searched around for the error and found some issues related to windows update. so I have run a script to reset the permission on the registry and file system but this has
made no difference.
Has anyone else seen this error before or know how to solve it?
ThanksHi all,
According to your description, this may be related to the permission which can write to C:\ drive, not the registry. I edit this script as following:
@echo off
subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=administrators=f
/grant=system=f
subinacl /subkeyreg HKEY_CURRENT_USER /grant=administrators=f
/grant=system=f
subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=administrators=f
/grant=system=f
subinacl /subdirectories %SystemDrive% /grant=administrators=f
subinacl /subdirectories %windir% /grant=administrators=f /grant=system=f
@Echo =========================
@Echo Finished.
@Echo =========================
@pause
When you click install button, it would create a folder under system drive, from the error information: access denied, it would be caused by the write permission on system drive root. So we can try this script for a check.
Alex Zhao
TechNet Community Support -
I backed up my system using 10.6 Snow Leopard's Time Machine to an external hard drive. I did this because I purchased a new internal hard drive to upgrade my 2007 White Macbook from 80GB to 320GB. When I installed the new hard drive, I installed 10.4 (Tiger) and then 10.5 (Leopard) and once Leopard was in I tried to use Time Machine to restore my backup from 10.6 (Snow Leopard) and received a kernal panic screen directly after the bootup.
The screen had code asking for 10.6, so does this mean that the computer is searching for Snow Leopard? If so, how can I do this? Will a bootable drive with Snow Leopard on it be able to solve the issue or will I somehow need to find a way to wipe out this new hard drive?
-SteveBooting From Snow Leopard Installer Disc
1. Insert Snow Leopard Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo appears.
5. Wait for installer to finish loading.
Drive Preparation and Installation
1. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. After formatting is complete quit DU and return to the installer. Install Snow Leopard. -
I cannot install the new version of iTunes on my PC. Keep getting message, apple mobile device failed to start.
Follow the directions of tt2 in https://discussions.apple.com/thread/5822086
-
"Failed to load the NVIDIA kernel module" [SOLVED]
Hi, I've just done a fresh install of Arch64 and I'm having problems with NVIDIA driver from the repo.
xorg, xf86-input-evdev -- INSTALLED
nvidia, nvidia-utils, lib32-nvidia-utils -- INSTALLED (version 256.44-1)
nouveau -- NOT INSTALLED
here goes the log files:
uname -a
Linux desktop 2.6.32-lts #1 SMP Wed Aug 4 22:02:05 UTC 2010 x86_64 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ AuthenticAMD GNU/Linux
lspci | grep VGA
00:05.0 VGA compatible controller: nVidia Corporation C51PV [GeForce 6150] (rev a2)
/etc/X11/xorg.conf (generated when I ran "nvidia-xconfig"):
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.44 ([email protected]) Thu Jul 29 01:52:55 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
/var/Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 142.066]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 142.084] X Protocol Version 11, Revision 0
[ 142.091] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 142.098] Current Operating System: Linux desktop 2.6.32-lts #1 SMP Wed Aug 4 22:02:05 UTC 2010 x86_64
[ 142.106] Kernel command line: BOOT_IMAGE=/vmlinuz26-lts root=/dev/disk/by-uuid/9eb5ef94-284b-4b7e-b824-5c6b0f329fe8 ro quiet
[ 142.116] Build Date: 21 June 2010 12:01:49PM
[ 142.125]
[ 142.135] Current version of pixman: 0.18.2
[ 142.145] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 142.167] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 142.204] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 6 21:15:02 2010
[ 142.218] (==) Using config file: "/etc/X11/xorg.conf"
[ 142.232] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 142.246] (==) ServerLayout "Layout0"
[ 142.246] (**) |-->Screen "Screen0" (0)
[ 142.246] (**) | |-->Monitor "Monitor0"
[ 142.246] (**) | |-->Device "Device0"
[ 142.246] (**) |-->Input Device "Keyboard0"
[ 142.246] (**) |-->Input Device "Mouse0"
[ 142.246] (==) Automatically adding devices
[ 142.246] (==) Automatically enabling devices
[ 142.246] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 142.246] Entry deleted from font path.
[ 142.246] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 142.246] Entry deleted from font path.
[ 142.246] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 142.246] Entry deleted from font path.
[ 142.246] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 142.246] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 142.246] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 142.246] (WW) Disabling Keyboard0
[ 142.246] (WW) Disabling Mouse0
[ 142.246] (II) Loader magic: 0x7ce880
[ 142.246] (II) Module ABI versions:
[ 142.246] X.Org ANSI C Emulation: 0.4
[ 142.246] X.Org Video Driver: 7.0
[ 142.246] X.Org XInput driver : 9.0
[ 142.246] X.Org Server Extension : 3.0
[ 142.252] (--) PCI:*(0:0:5:0) 10de:0240:1043:81cd nVidia Corporation C51PV [GeForce 6150] rev 162, Mem @ 0xfc000000/16777216, 0xd0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 142.252] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 142.252] (II) LoadModule: "extmod"
[ 142.252] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 142.253] (II) Module extmod: vendor="X.Org Foundation"
[ 142.253] compiled for 1.8.1.902, module version = 1.0.0
[ 142.253] Module class: X.Org Server Extension
[ 142.253] ABI class: X.Org Server Extension, version 3.0
[ 142.253] (II) Loading extension MIT-SCREEN-SAVER
[ 142.253] (II) Loading extension XFree86-VidModeExtension
[ 142.253] (II) Loading extension XFree86-DGA
[ 142.253] (II) Loading extension DPMS
[ 142.253] (II) Loading extension XVideo
[ 142.253] (II) Loading extension XVideo-MotionCompensation
[ 142.253] (II) Loading extension X-Resource
[ 142.253] (II) LoadModule: "dbe"
[ 142.253] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 142.253] (II) Module dbe: vendor="X.Org Foundation"
[ 142.253] compiled for 1.8.1.902, module version = 1.0.0
[ 142.253] Module class: X.Org Server Extension
[ 142.253] ABI class: X.Org Server Extension, version 3.0
[ 142.253] (II) Loading extension DOUBLE-BUFFER
[ 142.253] (II) LoadModule: "glx"
[ 142.253] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 142.269] (II) Module glx: vendor="NVIDIA Corporation"
[ 142.269] compiled for 4.0.2, module version = 1.0.0
[ 142.269] Module class: X.Org Server Extension
[ 142.269] (II) NVIDIA GLX Module 256.44 Thu Jul 29 01:47:53 PDT 2010
[ 142.269] (II) Loading extension GLX
[ 142.269] (II) LoadModule: "record"
[ 142.269] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 142.269] (II) Module record: vendor="X.Org Foundation"
[ 142.269] compiled for 1.8.1.902, module version = 1.13.0
[ 142.269] Module class: X.Org Server Extension
[ 142.269] ABI class: X.Org Server Extension, version 3.0
[ 142.269] (II) Loading extension RECORD
[ 142.269] (II) LoadModule: "dri"
[ 142.270] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 142.270] (II) Module dri: vendor="X.Org Foundation"
[ 142.270] compiled for 1.8.1.902, module version = 1.0.0
[ 142.270] ABI class: X.Org Server Extension, version 3.0
[ 142.270] (II) Loading extension XFree86-DRI
[ 142.270] (II) LoadModule: "dri2"
[ 142.270] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 142.270] (II) Module dri2: vendor="X.Org Foundation"
[ 142.270] compiled for 1.8.1.902, module version = 1.2.0
[ 142.270] ABI class: X.Org Server Extension, version 3.0
[ 142.270] (II) Loading extension DRI2
[ 142.270] (II) LoadModule: "nvidia"
[ 142.270] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 142.271] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 142.271] compiled for 4.0.2, module version = 1.0.0
[ 142.271] Module class: X.Org Video Driver
[ 142.288] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
[ 142.303] (EE) NVIDIA: system's kernel log for additional error messages.
[ 142.319] (II) UnloadModule: "nvidia"
[ 142.319] (II) Unloading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 142.319] (EE) Failed to load module "nvidia" (module-specific error, 0)
[ 142.335] (EE) No drivers available.
[ 142.351]
Fatal server error:
[ 142.384] no screens found
[ 142.400]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 142.469] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 142.488]
find / -name "*nvidia*"
/lib/modules/2.6.34-ARCH/kernel/drivers/video/backlight/mbp_nvidia_bl.ko
/lib/modules/2.6.34-ARCH/kernel/drivers/video/nvidia
/lib/modules/2.6.34-ARCH/kernel/drivers/video/nvidia/nvidiafb.ko
/lib/modules/2.6.34-ARCH/kernel/drivers/video/nvidia.ko
/lib/modules/2.6.32-lts/kernel/drivers/video/backlight/mbp_nvidia_bl.ko
/lib/modules/2.6.32-lts/kernel/drivers/video/nvidia
/lib/modules/2.6.32-lts/kernel/drivers/video/nvidia/nvidiafb.ko
/etc/OpenCL/vendors/nvidia.icd
/etc/X11/xorg.conf.d/20-nvidia.conf
/usr/lib/libnvidia-cfg.so.1
/usr/lib/libnvidia-glcore.so.256.44
/usr/lib/vdpau/libvdpau_nvidia.so.256.44
/usr/lib/vdpau/libvdpau_nvidia.so
/usr/lib/vdpau/libvdpau_nvidia.so.1
/usr/lib/tls/libnvidia-tls.so.256.44
/usr/lib/libnvidia-cfg.so.256.44
/usr/lib/libnvidia-cfg.so
/usr/lib/libnvidia-tls.so.256.44
/usr/lib/xorg/modules/drivers/nvidia_drv.so
/usr/lib/libnvidia-compiler.so.256.44
/usr/share/licenses/nvidia
/usr/share/licenses/lib32-nvidia-utils
/usr/share/licenses/nvidia-utils
/usr/share/applications/nvidia-settings.desktop
/usr/share/man/man1/nvidia-smi.1.gz
/usr/share/man/man1/nvidia-settings.1.gz
/usr/share/man/man1/nvidia-xconfig.1.gz
/usr/share/doc/nvidia
/usr/share/doc/nvidia-utils
/usr/share/pixmaps/nvidia-settings.png
/usr/bin/nvidia-bug-report.sh
/usr/bin/nvidia-settings
/usr/bin/nvidia-smi
/usr/bin/nvidia-xconfig
/usr/src/linux-2.6.34-ARCH/include/config/backlight/mbp/nvidia.h
/usr/src/linux-2.6.34-ARCH/include/config/fb/nvidia
/usr/src/linux-2.6.34-ARCH/include/config/fb/nvidia.h
/usr/src/linux-2.6.32-lts/include/config/backlight/mbp/nvidia.h
/usr/src/linux-2.6.32-lts/include/config/fb/nvidia
/usr/src/linux-2.6.32-lts/include/config/fb/nvidia.h
/opt/lib32/usr/lib/libvdpau_nvidia.so.256.44
/opt/lib32/usr/lib/libvdpau_nvidia.so
/opt/lib32/usr/lib/libnvidia-glcore.so.256.44
/opt/lib32/usr/lib/tls/libnvidia-tls.so.256.44
/opt/lib32/usr/lib/libvdpau_nvidia.so.1
/opt/lib32/usr/lib/libnvidia-tls.so.256.44
/opt/lib32/usr/lib/libnvidia-compiler.so.256.44
/var/lib/pacman/local/nvidia-256.44-1
/var/lib/pacman/local/nvidia-utils-256.44-1
/var/lib/pacman/local/lib32-nvidia-utils-256.44-1
/var/lib/pacman/sync/extra/nvidia-173xx-utils-173.14.27-1
/var/lib/pacman/sync/extra/nvidia-173xx-173.14.27-1
/var/lib/pacman/sync/extra/nvidia-256.44-1
/var/lib/pacman/sync/extra/nvidia-utils-256.44-1
/var/lib/pacman/sync/community/nvidia-cg-toolkit-2.2-4
/var/lib/pacman/sync/community/lib32-nvidia-utils-256.44-1
/var/cache/pacman/pkg/nvidia-utils-256.44-1-x86_64.pkg.tar.xz
/var/cache/pacman/pkg/nvidia-256.44-1-x86_64.pkg.tar.xz
/var/cache/pacman/pkg/lib32-nvidia-utils-256.44-1-x86_64.pkg.tar.xz
Do you have any idea of what should be done to fix it? I don't want to use NVIDIA driver from their site neither nouveau, I want to use the one from the repo. If you know how to solve it, instead of only pointing the solution, also tell why this is happening, it will help me and other people with the same problem too!
If you need additional information please ask me.
Thanks!!
Last edited by ILoveJapaneseGirls (2010-08-07 03:09:55)karol, I'll try to add the section you wrote to the xorg.conf, but first I want to show the log of the crash:
/var/log/Xorg.0.log
[ 69.813]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 69.858]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 69.882] X Protocol Version 11, Revision 0
[ 69.890] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 69.899] Current Operating System: Linux desktop 2.6.34-ARCH #1 SMP PREEMPT Wed Aug 4 14:31:56 CEST 2010 x86_64
[ 69.910] Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/9eb5ef94-284b-4b7e-b824-5c6b0f329fe8 ro quiet
[ 69.921] Build Date: 21 June 2010 12:01:49PM
[ 69.933]
[ 69.944] Current version of pixman: 0.18.2
[ 69.957] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 69.982] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 70.025] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 6 22:35:08 2010
[ 70.057] (==) Using config file: "/etc/X11/xorg.conf"
[ 70.072] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 70.117] (==) ServerLayout "Layout0"
[ 70.117] (**) |-->Screen "Screen0" (0)
[ 70.117] (**) | |-->Monitor "Monitor0"
[ 70.117] (**) | |-->Device "Device0"
[ 70.117] (**) |-->Input Device "Keyboard0"
[ 70.117] (**) |-->Input Device "Mouse0"
[ 70.117] (==) Automatically adding devices
[ 70.118] (==) Automatically enabling devices
[ 70.145] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 70.145] Entry deleted from font path.
[ 70.145] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 70.145] Entry deleted from font path.
[ 70.145] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 70.145] Entry deleted from font path.
[ 70.168] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 70.168] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 70.168] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 70.168] (WW) Disabling Keyboard0
[ 70.168] (WW) Disabling Mouse0
[ 70.168] (II) Loader magic: 0x7ce880
[ 70.168] (II) Module ABI versions:
[ 70.168] X.Org ANSI C Emulation: 0.4
[ 70.168] X.Org Video Driver: 7.0
[ 70.168] X.Org XInput driver : 9.0
[ 70.168] X.Org Server Extension : 3.0
[ 70.185] (--) PCI:*(0:0:5:0) 10de:0240:1043:81cd nVidia Corporation C51PV [GeForce 6150] rev 162, Mem @ 0xfc000000/16777216, 0xd0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 70.186] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 70.186] (II) LoadModule: "extmod"
[ 70.200] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 70.211] (II) Module extmod: vendor="X.Org Foundation"
[ 70.211] compiled for 1.8.1.902, module version = 1.0.0
[ 70.211] Module class: X.Org Server Extension
[ 70.211] ABI class: X.Org Server Extension, version 3.0
[ 70.211] (II) Loading extension MIT-SCREEN-SAVER
[ 70.211] (II) Loading extension XFree86-VidModeExtension
[ 70.211] (II) Loading extension XFree86-DGA
[ 70.211] (II) Loading extension DPMS
[ 70.211] (II) Loading extension XVideo
[ 70.211] (II) Loading extension XVideo-MotionCompensation
[ 70.211] (II) Loading extension X-Resource
[ 70.211] (II) LoadModule: "dbe"
[ 70.211] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 70.218] (II) Module dbe: vendor="X.Org Foundation"
[ 70.218] compiled for 1.8.1.902, module version = 1.0.0
[ 70.219] Module class: X.Org Server Extension
[ 70.219] ABI class: X.Org Server Extension, version 3.0
[ 70.219] (II) Loading extension DOUBLE-BUFFER
[ 70.219] (II) LoadModule: "glx"
[ 70.219] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 71.100] (II) Module glx: vendor="NVIDIA Corporation"
[ 71.111] compiled for 4.0.2, module version = 1.0.0
[ 71.111] Module class: X.Org Server Extension
[ 71.111] (II) NVIDIA GLX Module 256.44 Thu Jul 29 01:47:53 PDT 2010
[ 71.111] (II) Loading extension GLX
[ 71.111] (II) LoadModule: "record"
[ 71.111] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 71.125] (II) Module record: vendor="X.Org Foundation"
[ 71.125] compiled for 1.8.1.902, module version = 1.13.0
[ 71.125] Module class: X.Org Server Extension
[ 71.125] ABI class: X.Org Server Extension, version 3.0
[ 71.125] (II) Loading extension RECORD
[ 71.125] (II) LoadModule: "dri"
[ 71.126] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 71.140] (II) Module dri: vendor="X.Org Foundation"
[ 71.140] compiled for 1.8.1.902, module version = 1.0.0
[ 71.140] ABI class: X.Org Server Extension, version 3.0
[ 71.140] (II) Loading extension XFree86-DRI
[ 71.140] (II) LoadModule: "dri2"
[ 71.140] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 71.140] (II) Module dri2: vendor="X.Org Foundation"
[ 71.140] compiled for 1.8.1.902, module version = 1.2.0
[ 71.140] ABI class: X.Org Server Extension, version 3.0
[ 71.140] (II) Loading extension DRI2
[ 71.140] (II) LoadModule: "nvidia"
[ 71.141] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 71.187] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 71.189] compiled for 4.0.2, module version = 1.0.0
[ 71.189] Module class: X.Org Video Driver
[ 71.207] (II) NVIDIA dlloader X Driver 256.44 Thu Jul 29 01:24:51 PDT 2010
[ 71.207] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 71.207] (--) using VT number 7
[ 71.260] (II) Primary Device is: PCI 00@00:05:0
[ 71.269] (II) Loading sub module "fb"
[ 71.269] (II) LoadModule: "fb"
[ 71.269] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 71.281] (II) Module fb: vendor="X.Org Foundation"
[ 71.281] compiled for 1.8.1.902, module version = 1.0.0
[ 71.281] ABI class: X.Org ANSI C Emulation, version 0.4
[ 71.281] (II) Loading sub module "wfb"
[ 71.281] (II) LoadModule: "wfb"
[ 71.281] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 71.289] (II) Module wfb: vendor="X.Org Foundation"
[ 71.289] compiled for 1.8.1.902, module version = 1.0.0
[ 71.289] ABI class: X.Org ANSI C Emulation, version 0.4
[ 71.289] (II) Loading sub module "ramdac"
[ 71.289] (II) LoadModule: "ramdac"
[ 71.289] (II) Module "ramdac" already built-in
[ 71.309] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 71.309] (==) NVIDIA(0): RGB weight 888
[ 71.309] (==) NVIDIA(0): Default visual is TrueColor
[ 71.309] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 71.309] (**) NVIDIA(0): Enabling RENDER acceleration
[ 71.309] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 71.309] (II) NVIDIA(0): enabled.
[ 72.040] (II) NVIDIA(0): NVIDIA GPU GeForce 6150 (C51) at PCI:0:5:0 (GPU-0)
[ 72.040] (--) NVIDIA(0): Memory: 262144 kBytes
[ 72.040] (--) NVIDIA(0): VideoBIOS: 05.51.22.33.07
[ 72.040] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 72.040] (--) NVIDIA(0): Connected display device(s) on GeForce 6150 at PCI:0:5:0:
[ 72.040] (--) NVIDIA(0): LG Electronics L196WTQ (DFP-0)
[ 72.040] (--) NVIDIA(0): LG Electronics L196WTQ (DFP-0): 310.0 MHz maximum pixel clock
[ 72.040] (--) NVIDIA(0): LG Electronics L196WTQ (DFP-0): Internal Dual Link TMDS
[ 72.044] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 72.044] (==) NVIDIA(0):
[ 72.044] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 72.044] (==) NVIDIA(0): will be used as the requested mode.
[ 72.044] (==) NVIDIA(0):
[ 72.044] (II) NVIDIA(0): Validated modes:
[ 72.044] (II) NVIDIA(0): "nvidia-auto-select"
[ 72.044] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[ 72.045] (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
[ 72.045] (--) NVIDIA(0): option
[ 72.045] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 72.045] (--) Depth 24 pixmap format is 32 bpp
[ 72.052] (II) NVIDIA(0): Initialized GPU GART.
[ 72.055] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 72.055] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 72.055] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 72.055] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 72.055] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 72.055] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 72.055] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 72.055] (II) NVIDIA(0): Config Options in the README.
[ 72.056] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 72.178] (EE) NVIDIA(0): Failed to allocate primary buffer: out of memory.
[ 72.178] (EE) NVIDIA(0): *** Aborting ***
[ 72.178]
Fatal server error:
[ 72.178] AddScreen/ScreenInit failed for driver 0
[ 72.178]
[ 72.178]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 72.178] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 72.178]
As it's mentioned, it may be a problem of ACPI.
About the lib32-nvidia-utils, I just installed because it's written in the wiki http://wiki.archlinux.org/index.php/NVIDIA#Installing: "Note: On 64 bit systems, For 32-bit programs to take advantage of nvidia-utils you must also install the equivalent lib32 package (for example lib32-nvidia-utils)." -
Error after installing the new JSF release
I've got a problem to install the new JSF release. I downloaded the Web Services Developer Pack 1.3 from the homepage and installed it. Then, i downloaded the actual release of the JSF 1.0 as a zip file. I removed the existing jsf directory in the original WSDP and extracted the zip file into the home directory of the WSDP. Then I renamed the directory from jsf-1.0 to jsf and started the tomcat again.
But then I get the following errors and tomcat isn't working at all:
Mar 19, 2004 1:43:52 PM org.apache.coyote.http11.Http11Protocol init
INFO: Initializing Coyote HTTP/1.1 on port 8080
Mar 19, 2004 1:43:52 PM org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 3297 ms
Mar 19, 2004 1:43:52 PM org.apache.catalina.core.StandardService start
INFO: Starting service Java Web Services Developer Pack
Mar 19, 2004 1:43:52 PM org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Java Web Services Developer Pack/1.3
Mar 19, 2004 1:43:52 PM org.apache.catalina.core.StandardHost getDeployer
INFO: Create Host deployer for direct deployment ( non-jmx )
Mar 19, 2004 1:43:53 PM org.apache.catalina.core.StandardHostDeployer install
INFO: Processing Context configuration file URL file:H:\jwsdp-1.3\conf\Catalina\localhost\jwsdp-catalog.xml
Mar 19, 2004 1:43:54 PM org.apache.catalina.core.StandardContext listenerStart
SEVERE: Skipped installing application listeners due to previous error(s)
Mar 19, 2004 1:43:54 PM org.apache.catalina.core.StandardContext start
SEVERE: Error listenerStart
Mar 19, 2004 1:43:54 PM org.apache.catalina.core.StandardContext start
SEVERE: Context startup failed due to previous errors
Mar 19, 2004 1:43:54 PM org.apache.catalina.logger.LoggerBase stop
INFO: unregistering logger Catalina:type=Logger,path=/jwsdp-catalog,host=localhost
Mar 19, 2004 1:43:54 PM org.apache.catalina.core.StandardHostDeployer install
INFO: Processing Context configuration file URL file:H:\jwsdp-1.3\conf\Catalina\localhost\jstl-examples.xml
Mar 19, 2004 1:44:03 PM org.apache.catalina.core.StandardHostDeployer install
INFO: Processing Context configuration file URL file:H:\jwsdp-1.3\conf\Catalina\localhost\jsf-cardemo.xml
Mar 19, 2004 1:44:14 PM com.sun.faces.config.rules.NavigationRuleRule end
WARNING: [NavigationRuleRule]{faces-config/navigation-rule} Merge(/confirmChoices.jsp)
Mar 19, 2004 1:44:16 PM org.apache.catalina.core.StandardHostDeployer install
INFO: Processing Context configuration file URL file:H:\jwsdp-1.3\conf\Catalina\localhost\jsf-nonjsp.xml
Mar 19, 2004 1:44:27 PM org.apache.catalina.core.StandardHostDeployer install
INFO: Processing Context configuration file URL file:H:\jwsdp-1.3\conf\Catalina\localhost\jsf-components.xml
Mar 19, 2004 1:44:40 PM org.apache.catalina.core.StandardHostDeployer install
INFO: Processing Context configuration file URL file:H:\jwsdp-1.3\conf\Catalina\localhost\jsf-guessNumber.xml
Mar 19, 2004 1:44:52 PM com.sun.faces.config.ConfigureListener verifyObjects
INFO: Application object verification completed successfully
Mar 19, 2004 1:44:52 PM org.apache.catalina.core.StandardHostDeployer install
INFO: Processing Context configuration file URL file:H:\jwsdp-1.3\conf\Catalina\localhost\admin.xml
Mar 19, 2004 1:44:53 PM org.apache.catalina.core.StandardContext listenerStart
SEVERE: Skipped installing application listeners due to previous error(s)
Mar 19, 2004 1:44:53 PM org.apache.catalina.core.StandardContext start
SEVERE: Error listenerStart
Mar 19, 2004 1:44:53 PM org.apache.catalina.core.StandardContext start
SEVERE: Context startup failed due to previous errors
Mar 19, 2004 1:44:53 PM org.apache.catalina.logger.LoggerBase stop
INFO: unregistering logger Catalina:type=Logger,path=/admin,host=localhost
Mar 19, 2004 1:44:53 PM org.apache.catalina.core.StandardHostDeployer install
INFO: Processing Context configuration file URL file:H:\jwsdp-1.3\conf\Catalina\localhost\manager.xml
Mar 19, 2004 1:44:54 PM org.apache.catalina.core.StandardContext listenerStart
SEVERE: Skipped installing application listeners due to previous error(s)
Mar 19, 2004 1:44:54 PM org.apache.catalina.core.StandardContext start
SEVERE: Error listenerStart
Mar 19, 2004 1:44:54 PM org.apache.catalina.core.StandardContext start
SEVERE: Context startup failed due to previous errors
Mar 19, 2004 1:44:54 PM org.apache.catalina.core.StandardHostDeployer install
INFO: Installing web application at context path from URL file:H:\jwsdp-1.3\webapps\ROOT
Mar 19, 2004 1:44:54 PM org.apache.catalina.core.StandardContext listenerStart
SEVERE: Skipped installing application listeners due to previous error(s)
Mar 19, 2004 1:44:54 PM org.apache.catalina.core.StandardContext start
SEVERE: Error listenerStart
Mar 19, 2004 1:44:54 PM org.apache.catalina.core.StandardContext start
SEVERE: Context startup failed due to previous errors
Mar 19, 2004 1:44:54 PM org.apache.catalina.core.StandardHostDeployer install
INFO: Installing web application at context path /jsp-examples from URL file:H:\jwsdp-1.3\webapps\jsp-examples
Mar 19, 2004 1:44:55 PM org.apache.catalina.core.StandardContext listenerStart
SEVERE: Skipped installing application listeners due to previous error(s)
Mar 19, 2004 1:44:55 PM org.apache.catalina.core.StandardContext start
SEVERE: Error listenerStart
Mar 19, 2004 1:44:55 PM org.apache.catalina.core.StandardContext start
SEVERE: Context startup failed due to previous errors
Mar 19, 2004 1:44:55 PM org.apache.catalina.core.StandardHostDeployer install
INFO: Installing web application at context path /servlets-examples from URL file:H:\jwsdp-1.3\webapps\servlets-examples
Mar 19, 2004 1:44:56 PM org.apache.catalina.core.StandardContext listenerStart
SEVERE: Skipped installing application listeners due to previous error(s)
Mar 19, 2004 1:44:56 PM org.apache.catalina.core.StandardContext start
SEVERE: Error listenerStart
Mar 19, 2004 1:44:56 PM org.apache.catalina.core.StandardContext start
SEVERE: Context startup failed due to previous errors
Mar 19, 2004 1:44:56 PM org.apache.coyote.http11.Http11Protocol start
INFO: Starting Coyote HTTP/1.1 on port 8080
Mar 19, 2004 1:44:56 PM org.apache.catalina.startup.Catalina start
INFO: Server startup in 63891 ms
So what's wrong with my installation.
kind regards, IngoYour server may be in an unstable state if you did not remove all of the old cached files.
I recommend you clear out your <JWSDP_HOME>/work directory and remove all the <JWSDP_HOME>/conf/Catalina/localhost/jsf* files and restart your server.
Thanks,
Justyna -
[Solved] Failed to initialize the NVIDIA kernel module
Hi all,
I've just made the jump to arch and have a fresh install. I'm having trouble getting the nvidia drivers to work. I am currently using the nouveau drivers without issue.
The method I am using - after much trial - is:
- uninstall nouveau and mesa lib
- install nvidia package
- remove nouveau module entry in mkinitcpio.conf
- run `mkinitcpio -p linux`
- edit .conf in xorg.conf.d with minimal required settings. Currently:
Section "Device"
Identifier "device0"
Driver "nvidia"
BusID "PCI:1:0:0"
EndSection
I have installed the linux-headers package and tried reinstalling nvidia again
Card:
01:00.0 VGA compatible controller: NVIDIA Corporation GF106 [GeForce GTS 450] (rev a1)
Kernel:
3.12.6-1-ARCH
My Xorg.0.log looks like:
[ 3.979]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 3.979] X Protocol Version 11, Revision 0
[ 3.979] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 3.979] Current Operating System: Linux arch.tempera 3.12.6-1-ARCH #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013 x86_64
[ 3.979] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw
[ 3.979] Build Date: 13 December 2013 03:11:42PM
[ 3.979]
[ 3.979] Current version of pixman: 0.32.4
[ 3.979] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 3.979] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3.979] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 4 21:29:46 2014
[ 3.980] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 3.980] (==) No Layout section. Using the first Screen section.
[ 3.980] (==) No screen section available. Using defaults.
[ 3.980] (**) |-->Screen "Default Screen Section" (0)
[ 3.980] (**) | |-->Monitor "<default monitor>"
[ 3.981] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 3.981] (**) | |-->Device "device0"
[ 3.981] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3.981] (==) Automatically adding devices
[ 3.981] (==) Automatically enabling devices
[ 3.981] (==) Automatically adding GPU devices
[ 3.984] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 3.984] Entry deleted from font path.
[ 3.984] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 3.984] Entry deleted from font path.
[ 3.984] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 3.984] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 3.984] Entry deleted from font path.
[ 3.984] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 3.984] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 3.984] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3.984] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3.984] (II) Loader magic: 0x7fec20
[ 3.984] (II) Module ABI versions:
[ 3.984] X.Org ANSI C Emulation: 0.4
[ 3.984] X.Org Video Driver: 14.1
[ 3.984] X.Org XInput driver : 19.1
[ 3.984] X.Org Server Extension : 7.0
[ 3.985] (--) PCI:*(0:1:0:0) 10de:0dc4:19da:1184 rev 161, Mem @ 0xf4000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 3.986] Initializing built-in extension Generic Event Extension
[ 3.986] Initializing built-in extension SHAPE
[ 3.986] Initializing built-in extension MIT-SHM
[ 3.986] Initializing built-in extension XInputExtension
[ 3.986] Initializing built-in extension XTEST
[ 3.986] Initializing built-in extension BIG-REQUESTS
[ 3.986] Initializing built-in extension SYNC
[ 3.986] Initializing built-in extension XKEYBOARD
[ 3.986] Initializing built-in extension XC-MISC
[ 3.986] Initializing built-in extension SECURITY
[ 3.986] Initializing built-in extension XINERAMA
[ 3.986] Initializing built-in extension XFIXES
[ 3.986] Initializing built-in extension RENDER
[ 3.986] Initializing built-in extension RANDR
[ 3.986] Initializing built-in extension COMPOSITE
[ 3.986] Initializing built-in extension DAMAGE
[ 3.986] Initializing built-in extension MIT-SCREEN-SAVER
[ 3.986] Initializing built-in extension DOUBLE-BUFFER
[ 3.986] Initializing built-in extension RECORD
[ 3.986] Initializing built-in extension DPMS
[ 3.986] Initializing built-in extension X-Resource
[ 3.986] Initializing built-in extension XVideo
[ 3.986] Initializing built-in extension XVideo-MotionCompensation
[ 3.986] Initializing built-in extension XFree86-VidModeExtension
[ 3.986] Initializing built-in extension XFree86-DGA
[ 3.986] Initializing built-in extension XFree86-DRI
[ 3.986] Initializing built-in extension DRI2
[ 3.986] (II) LoadModule: "glx"
[ 3.989] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4.075] (II) Module glx: vendor="NVIDIA Corporation"
[ 4.075] compiled for 4.0.2, module version = 1.0.0
[ 4.075] Module class: X.Org Server Extension
[ 4.075] (II) NVIDIA GLX Module 331.20 Wed Oct 30 17:36:48 PDT 2013
[ 4.076] Loading extension GLX
[ 4.076] (II) LoadModule: "nvidia"
[ 4.076] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 4.082] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 4.082] compiled for 4.0.2, module version = 1.0.0
[ 4.082] Module class: X.Org Video Driver
[ 4.083] (II) NVIDIA dlloader X Driver 331.20 Wed Oct 30 17:16:53 PDT 2013
[ 4.083] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 4.083] (++) using VT number 7
[ 4.090] (II) Loading sub module "fb"
[ 4.090] (II) LoadModule: "fb"
[ 4.090] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4.091] (II) Module fb: vendor="X.Org Foundation"
[ 4.091] compiled for 1.14.5, module version = 1.0.0
[ 4.091] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.091] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 4.091] (II) Loading sub module "wfb"
[ 4.091] (II) LoadModule: "wfb"
[ 4.091] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 4.092] (II) Module wfb: vendor="X.Org Foundation"
[ 4.092] compiled for 1.14.5, module version = 1.0.0
[ 4.092] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.092] (II) Loading sub module "ramdac"
[ 4.092] (II) LoadModule: "ramdac"
[ 4.092] (II) Module "ramdac" already built-in
[ 4.093] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4.093] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 4.093] (==) NVIDIA(0): RGB weight 888
[ 4.093] (==) NVIDIA(0): Default visual is TrueColor
[ 4.093] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4.094] (**) NVIDIA(0): Enabling 2D acceleration
[ 4.095] (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module. Please see the
[ 4.095] (EE) NVIDIA(0): system's kernel log for additional error messages and
[ 4.095] (EE) NVIDIA(0): consult the NVIDIA README for details.
[ 4.095] (EE) NVIDIA(0): *** Aborting ***
[ 4.095] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 4.095] (II) UnloadModule: "nvidia"
[ 4.095] (II) UnloadSubModule: "wfb"
[ 4.095] (II) UnloadSubModule: "fb"
[ 4.095] (EE) Screen(s) found, but none have a usable configuration.
[ 4.095] (EE)
Fatal server error:
[ 4.095] (EE) no screens found(EE)
[ 4.095] (EE)
Please consult the The X.Org Foundation support
at [url]http://wiki.x.org[/url]
for help.
[ 4.095] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 4.095] (EE)
[ 4.107] (EE) Server terminated with error (1). Closing log file.
The only entry I found in `dmesg | grep nvidia` related to nvidia-drm, and seemed to say it was loaded successfully. I didn't save the exact entry and i've reinstalled nouveau now so that I could post this.
Any help much appriciated. I've been at this for a while. Learning a lot in the process!
Last edited by gnibbler (2014-01-04 22:31:49)Success! Several days of trying various things and I finally give in and make a post to this forum. One more attempt - which was only really so that I could add modprobe info to this post - and it works.
I had at some stage installed the driver xf86-video-nv, and this may have been causing the clash. I un-installed it, and followed the procedure above to reinstall nvidia.
I think the main hang up I'd had is that I had not been rebuilding my kernel image with mkinitcpio after installing nvidia during my previous attempts.
I hope some info in here helps some other stuck archer.
Edit: Thanks graysky. I had found the right nvidia driver using the arch wiki and followed this advice to remove the nouveau hook. Much appriciated.
Last edited by gnibbler (2014-01-04 22:35:00) -
Installation Failure: Windows failed to install the following update with error 0x800F0922
Hi folks,
I have a HP Elitebook Folio 9470p. It came with Windows 8, and I installed it on my corporate domain. I was trying to do some Windows updates so I could upgrade it to Windows 8.1, but it fails installing the updates, whether or not I try
to install them one at a time or all of them. It has about 18 updates it needs from security updates to a .net framework update. I run Symantec EP, and disabled it, checked for driver updates for things like display and networking and they are
all up to date.
I'm at a loss as to what to do. It gives this error in the event log for each file, Event ID 20.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Windows 8 for x64-based Systems (KB2862152).
This is the example for KB2862152, but it gives the same error for every one. I've tried to auto fix for Windows update issues and it fixed a couple of the issues, but not all of them, and provides no other help.
I also deleted folders and files from the SoftwareDistribution folder as well, to no avail. Any ideas what I can do to get whatever updates it needs, so I can fully patch it, and upgrade it to Win 8.1?
Thanks for any help!Hi MM. Mr Kywildcat and Vegan Fan,
GOOD NEW ! At this time, my issue is solved. The only black side is "how ?" : I hope that we will get a response some day ; however, and for in information pnly - hoping this could help someone - I resume some actions which allowed this the happy end
1) about installing 8.1 : I wanted to be sure that gain/pain ratio was positive, and that upgrading from a (potentially) damaged system would'nt produce something looking like a new Win 8.1, but difficult to maintain and keeping some negative potentialities.
2) I was influenced by the fact that this
0x800F0922 error acted as "a serial killerror", whose root cause could be a unique update error at reboot time concerning several (>20) packages, so I decided to test some manual upgrades.
3) Manual update (i.e. manual download and maunching of .msu packages) of the 2 following packages
(whose update previously failed on a Windows Update) was successful : .NET Framework version 3.5 for x64 (KB2898866) and Camera Codec Pack Windows 8 for x64 (KB2899190)
4) So I decided to try Windows Update on a selection of packages, first : those concerning .Net Framework 3.5 and 4.5 (that is: KB2898866, 2901120, 2898865) --> Successful !
5) finally, I selected almost all other packages, with some exceptions wich I (think to) have no need for : KB2871690, 2904659, 2843630. To be complete, here is the list of pakages updated one time at all :
KB 2892074, 2893294, 2893984, 2909210, 2912390, 2916036, 2889784,2903938, 2911101, 2913152, 2917499
--> always succesful.
I am not a specialist, but I uess that this 0x800F0922 error hides another problem which is globally "H-RESULTED"
to all updates pending in one update operation with reboot. This could be assumed from this CBS.log exterped from my last wrong attempts, where root cause seems not to be
0x800f0922, but 0x80004003 :
2014-02-15 21:29:13, Info CBS Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2014-02-15 21:29:13, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-02-15 21:29:18, Error CBS Startup: Failed to process advanced operation queue, startupPhase: 0. A rollback transaction will be created. [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED]
Anyway, thanks to you who spent some of your time to describe issues and search/ suggest solutions ; I will upgrade my system to 8.1 anyway, some of this day, when I am sure that my configuration does not hides some other problem. I thing that potential
issue remains until maybe a new KB corrects it, wrong :-) ?
And I hope that you - Mr Kywildcat - can upgrade your system on "current levels" trying similar attempts.
Phil -
I am trying to install the new iTunes and I keep geting the error message "Apple Mobile Device" failed to start. Verify you have sufficient privileges to start system services". HELP
Hey schouten53,
Thanks for the question. I understand you are experiencing issues with the latest iTunes update. Let’s troubleshoot the iTunes installation by completely removing and reinstalling iTunes and all related components (it is important to remove all components in the order listed).
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Additional Information:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M.
Maybe you are looking for
-
Question 1: In my family of 4, we currently have different Apple ID's and we all use different credit cards to purchase our apps and media. When iOS 8 is released, if we agree to share the same credit card, will we be able to access apps that a famil
-
Error by inserting data into a field of datatype LONG
Hi, When inserting data into a field of datatype long in oracle8 database via SQL Plus or SQL worksheet there occurs the following error message: "field in data file exceeds the maximum length". If I access to the database from a selve written progra
-
Problem With UNIX command in ODI Environment.
A procedure is used in our package which involves moving a file from a folder to another in a UNIX server. The procedure uses an OS command - 'os.system' to execute unix command. The unix command is a grep command which seems to work fine when execut
-
Password protected script in iWeb??
Hello there, we are very new to this web site publishing so bear with us. Have successfully published a site (not a .mac) previously, then upgraded to 08 iLife. Now, the second site (not a .mac) will upload but we cannot view it as it is asking for a
-
Just purchased the "Adobe Acrobat Pro" but now I cant download the software
I just paid $180.00 to purchase the "Adobe Acrobat Pro" After I provide all necessary information and set up an account, I was then instructed to download and install the software, however when I click on the software download button, it does NOT dow