Failed to Open FR report With Error code 500 - 'unable to process request'

I am running a load test against PBCS service. The service is load-balanced with 2 managed servers : EPMServer0 and EPMServer1
When I put the loads with 60 VUs -- all visiting FR reports, the service runs without error. But when the VU# increased to 90, it began to respond with Error code 500 - 'unable to process request'.
I tried to correlate the FRLogging logs to the errors, and found during the time those error happens, there are logs like this:
>>>>>>>>>>>>>>>>>>>>>>>>>>
[2013-09-27T05:21:29.325+00:00] [EPMServer0] [WARNING] [00365] [oracle.EPMFR.core] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: sysname50134114.PerfUser0439] [ecid: 004tpQ^VFHT7m3RLIYDCif0007a30002bD,0:2:1:1] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_CLASS: com.hyperion.reporting.connection.UserConnection] [SRC_METHOD: openConnection] User authentication information is invalid. Unable to connect to datasource.[[
com.hyperion.reporting.util.HyperionReportException: Error connecting to database connection Vision:Plan1: Failed to sync with user provisioning.com.hyperion.planning.HspRuntimeException
        at com.hyperion.reporting.connection.UserConnection.openConnection(Unknown Source)
        at com.hyperion.reporting.connection.UserConnection.openConnection(Unknown Source)
        at com.hyperion.reporting.connection.UserConnection.<init>(Unknown Source)
        at com.hyperion.reporting.connection.ConnectionManager.getConnection(Unknown Source)
        at com.hyperion.reporting.connection.ConnectionManager.getCube(Unknown Source)
        at com.hyperion.reporting.connection.ConnectionManager.getCube(Unknown Source)
        at com.hyperion.reporting.webviewer.WebDynamicReport.validateDatasources(Unknown Source)
    at jsp_servlet._modules._com._hyperion._reporting._web._reportviewer.__hrhtmlreport._jspService(__hrhtmlreport.java:1999)
        at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
        at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
        at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
        at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
        at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at com.hyperion.reporting.webviewer.HRSecurePagesFilter.needAuthentication(Unknown Source)
        at com.hyperion.reporting.webviewer.HRSecurePagesFilter.doFilter(Unknown Source)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at com.hyperion.reporting.webviewer.FRClusterHelper.doFilter(Unknown Source)
>>>>>>>>>>>>>>>>>>>>>>>>>
It looks like the servlet failed to open the datasource connection while handling the FR requests. But there are several data sources. My questions are:
1) Which datasource is corresponding to the issue? Is it EPMSystemRegistry?
2) What is the recommended configuration for the connection pool max capacity setting? -- current setting for EPMSystemRegistry is 30
3) Whether it could be a connection leak problem as only 90 concurrent end user is visiting and it failed to connect?
Thanks,
Ellick Lu
Type
JNDI Name
Targets
aif_datasource
Generic
jdbc/aif_datasource
EPMServer
calc_datasource
Generic
jdbc/calc_datasource
EPMServer
EPMSystemRegistry
Generic
jdbc/EPMSystemRegistry
EPMServer
odiMasterRepository
Generic
jdbc/odiMasterRepository
EPMServer
planning_datasource
Generic
jdbc/planning_datasource
EPMServer
raframework_datasource
Generic
jdbc/raframework_datasource
EPMServer

It is checking for Database connection in Workspace. Check Editing Database Connections
Can those users login to Planning? Do they have correct security setup (I guess not)
Regards
Celvin
http://www.orahyplabs.com

Similar Messages

Problem: Failed to open the connection. Error Code 0x800002F4 (-2147482892)

Problem: Failed to open the connection. Error Code 0x800002F4 (-2147482892)
This is on two (2) separate machines. These are NEW INSTALLATION development work stations (laptops). One is Vista (Visual Studio 2008 / Crystal Reports 2008), and the other is Windows XP Pro (Visual Studio 2003 / Crystal Reports XI R1).
I am using EXISTING CODE (established over several years), and EXISTING REPORTS (established over several years). Old development station was XP Pro, as above, and still exists, and still works fine.
I can open the report in Crystal, and see the results just fine. Data for the report is obtained via ODBC.
Can someone identity the actual error by the Error Code above, and advise. Thanks You in Advance.

Ok, so let's start at step 1:
SP 1 just released and I'd recommend applying that. The SO is available from here:
https://smpdl.sap-ag.de/~sapidp/012002523100010503722008E/cr2008_sp1.exe
For future reference, msm matching the above SP is here:
https://smpdl.sap-ag.de/~sapidp/012002523100011715292008E/cr121_mm.zip
and msi is here:
https://smpdl.sap-ag.de/~sapidp/012002523100011722132008E/cr121_redist_install.zip
Step 2: a few questions:
a) I am not sure what CR SDK you are using; RDC, .NET? I suspect that you are using the CR assemblies for .NET, but do confirm.
b) what is the database you are connecting to?
c) is this a web or a win app?
Step 3: As the error can mean any number of things (to me it's just means something went wrong during the attempt to connect to the database...), the solution may vary, however the troubleshooting steps remain quite consistent:
1) Do make sure the report is indeed working in the CR 2008 designer (e.g.; make sure "saved data" is not enabled.
2) Try a simple new windows app with one of your reports. See if you have a report with no subreports and use it
3) If that works, use a report with subreports
4) If the above does not work in (1) above, create a new report to the same ODBC connection, do not code any database connection - let the report prompt for the logon parameter (PWD)
5) Run the new report in your new app, enter the PWD when prompted
6) If this works, add your database logon code
7) If that works, add your original report (again, preferably with no subreports)
8) If that fails, ensure that the subreport and main report use the same database connection type (ODBC)
9) If it works, see if you can determine the difference between your old app and the new app.
Ludek

After running adstrtal.sh with error code 0, unable to login

Dear All
I have successfully installed 11i on SLES 9. After installation, i was able to run the script adstrtal.sh successfully as root with error code 0. I get the home page with out any problem. When i tried to logon to the application, i get the following error message on the browser, when i click on the log on link on the application home page.
error message:
Internal Server Error(500)
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
Any guidance on this problem would be very helpful.
thanks in advance
Shan
email: [email protected]

I am getting same problem....I am unable to solve it out..I have tried all posibilites...
My Apps Version 11.5.10.2(10.2.0.2 Database) on SuSe 9.0 server. I have applied ATG_RUP4 and Latest HRMS Family packes in this instance before 5 months.....all are successfull....Till Last Night..no problem...I am getting this problem from today morning...
GUEST user password is correct in dbc file and in profile option...
All services are up and running...
Today morning I got this error..when all the users login into apps...Home page is succesfully loaded...when we try to login into login page...it is throwing this error...
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
till last night...This is working...from today morning it is giving problem.
we are able to login via
http://appsever.xyz.com:8000/dev60cgi/f60cgi
but
we are getting this problem when login via
this
http://appserver.xyz.com:8000
what may be the problem??????
Errors in mod_jserv.log
[03/05/2007 10:37:21:684] (ERROR) ajp12: Servlet Error: oracle.apps.fnd.cache.CacheException: null
[03/05/2007 10:37:21:684] (ERROR) an error returned handling request via protocol "ajpv12"
[03/05/2007 10:37:21:684] (ERROR) balance: 13830 internal servlet error in server appserver.xyz.com:16010
[03/05/2007 10:37:21:684] (ERROR) an error returned handling request via protocol "balance"
Errors in mod_jserv.log
[03/05/2007 11:15:46:935] (EMERGENCY) ajp12: auth did not receive challenge size
[03/05/2007 11:15:46:935] (EMERGENCY) ajp12: function auth fail
error in $access_log.<Number>
appserver.xyz.com - - [03/May/2007:11:15:50 -0700] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=XmlSvcsGrp&port=19010 HTTP/1.1" 200 15
appserver.xyz.com - - [03/May/2007:11:15:58 -0700] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=XmlSvcsGrp&port=19010 HTTP/1.1" 200 15
appserver.xyz.com - - [03/May/2007:11:16:05 -0700] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=XmlSvcsGrp&port=19010 HTTP/1.1" 200 15
appserver.xyz.com - - [03/May/2007:11:16:12 -0700] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=XmlSvcsGrp&port=19010 HTTP/1.1" 200 15
appserver.xyz.com - - [03/May/2007:11:16:19 -0700] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=XmlSvcsGrp&port=19010 HTTP/1.1" 200 15
appserver.xyz.com - - [03/May/2007:11:16:26 -0700] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=XmlSvcsGrp&port=19010 HTTP/1.1" 200 15
appserver.xyz.com - - [03/May/2007:11:16:34 -0700] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=XmlSvcsGrp&port=19010 HTTP/1.1" 200 15
appserver.xyz.com - - [03/May/2007:11:16:41 -0700] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=XmlSvcsGrp&port=19010 HTTP/1.1" 200 15
appserver.xyz.com - - [03/May/2007:11:16:48 -0700] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=XmlSvcsGrp&port=19010 HTTP/1.1" 200 15
appserver.xyz.com - - [03/May/2007:11:16:55 -0700] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=XmlSvcsGrp&port=19010
HTTP/1.1" 200 15
error in the error_log
[Thu May 3 11:19:39 2007] [warn] OPM: EW: Process appserver.xyz.com:19010 (pid:5671, group:XmlSvcsGrp) died, restarting.
[Thu May 3 11:19:46 2007] [warn] OPM: EW: Process appserver.xyz.com:19010 (pid:5710, group:XmlSvcsGrp) died, restarting.
[Thu May 3 11:19:54 2007] [warn] OPM: EW: Process appserver.xyz.com:19010 (pid:5749, group:XmlSvcsGrp) died, restarting.
[Thu May 3 11:20:01 2007] [warn] OPM: EW: Process appserver.xyz.com:19010 (pid:5784, group:XmlSvcsGrp) died, restarting.
[Thu May 3 11:20:08 2007] [warn] OPM: EW: Process appserver.xyz.com:19010 (pid:5823, group:XmlSvcsGrp) died, restarting.
[Thu May 3 11:20:15 2007] [warn] OPM: EW: Process appserver.xyz.com:19010 (pid:5862, group:XmlSvcsGrp) died, restarting.
error in the error_log_pls
[Thu May 3 09:07:13 2007] [notice] FastCGI: process manager initialized (pid 5399)
[Thu May 3 09:07:14 2007] [notice] Oracle HTTP Server Powered by Apache/1.3.19 configured -- resuming normal operations
[Thu May 3 09:43:57 2007] [notice] caught SIGTERM, shutting down
[Thu May 3 09:55:33 2007] [notice] FastCGI: process manager initialized (pid 5002)
[Thu May 3 09:55:34 2007] [notice] Oracle HTTP Server Powered by Apache/1.3.19 configured -- resuming normal operations
[Thu May 3 10:06:03 2007] [notice] caught SIGTERM, shutting down
[Thu May 3 10:08:43 2007] [notice] FastCGI: process manager initialized (pid 13851)
[Thu May 3 10:08:44 2007] [notice] Oracle HTTP Server Powered by Apache/1.3.19 configured -- resuming normal operations
(1) I have run the autoconfig in all tiers
(2) I have compiled all invalid objects.
(3) I have checked the guest user password in all places..it is correct
(4) I am able to login via dev60cgi/f60cgi screen..
(5) I have checked the Application Database ID profile optin it is corect..
(6) I have checked the DBC file..it is having right values in that file..
(7) I have cleared the cache (OA_HTML/_pages)
(8) Recheced the issue...still getting same problem
Still I am unable to solve out this issue...
Please suggest to solve this...
Message was edited by:
bsubbu
Message was edited by:
bsubbu

SOAP Parsing Error: Server was unable to process request

Hia,
We are working on ABAP Proxy --> SAP PI 7.1 --> SOAP (Asynchronous Scenario).
(ECC -> PI -> Legacy CRM)
System is getting connected and able to send asynchronous messages to legacy system. But getting following error while sending synchronous error:
2010-05-10 13:15:05 Information Delivering to channel: CC_SOAP_SOReject_Out
2010-05-10 13:15:05 Information SOAP: request message entering the adapter with user J2EE_GUEST
2010-05-10 13:15:05 Information SOAP: completed the processing
2010-05-10 13:15:05 Information SOAP: continuing to response message f33caa90-5c07-11df-c659-96d147c2ff0f
2010-05-10 13:15:05 Error SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
2010-05-10 13:15:05 Error Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
2010-05-10 13:15:05 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.. Setting message to status failed.
2010-05-10 13:15:06 Error The message status was set to FAIL.
I have already checked Data Structure and it is fine.
Regards
In this scenarios we are using XSLT mapping using CDATA.
Please suggest solution.

Source structure;
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_SOR_test xmlns:ns0="http://MTSINDIA/TEST/SingleValue">
   <ITEM>
      <sSlsOrderCode>100</sSlsOrderCode>
      <sDlrCode>200</sDlrCode>
      <sRejectReason>300</sRejectReason>
      <nCircleCode>400</nCircleCode>
   </ITEM>
</ns0:MT_SOR_test>
Final Target strucutre accept Web Service
<?xml version="1.0" encoding="UTF-8"?>
<ns1:SalesOrderReject xmlns:ns1="http://tempuri.org/"><ns1:SalerOrderRejXML><ITEM><sSlsOrderCode>100</sSlsOrderCode><sDlrCode>200</sDlrCode><sRejectionReason>300</sRejectionReason><nCircleCode>400</nCircleCode></ITEM></ns1:SalerOrderRejXML></ns1:SalesOrderReject>
The above result is the test result which I got from using CONCAT and CONSTANT function si graphical mapping which is not a feasible solutin. It works in small strucutres but where the data structure is big (lets say 40 nodes) and coplex structure than it will fail.
Cannot use XSLT as CDATA will come in picture. Any other options?

Error: Server was unable to process request. --- Object reference not set

Hi All,
I am using ALSB 2.6.
In the project, i have requirement to do transformation of incoming request with CData Tag and getting a response from the remote service.
I have configured the Proxy Service and Business Service with a message route in which transformation is happening using replace action and adding a XSLT there.
While sending the request from ALSB Test Console , its doing the transformation correctly as follows:
Transformed Request at ALSB
<soapenv:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<lif:MultipleTermLifeQuotePublic xmlns:lif="https://www.farmerslife.com/LifeNetWS/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<lif:xmlInput>
<TERM_LIFE_RATE_QUOTE>
<Quote_Request Quote_Sequence = "100">
<Face_Amount>
1000.00
</Face_Amount>
<Gender>
male
</Gender>
<Age>
100
</Age>
<Level_Term_Years>
100
</Level_Term_Years>
<Type>
string
</Type>
<Nicotine>
true
</Nicotine>
<CIR_Amount>
1000.00
</CIR_Amount>
<State>
string
</State>
<Waiver_Premium>
false
</Waiver_Premium>
</Quote_Request>
</TERM_LIFE_RATE_QUOTE>
</lif:xmlInput>
</lif:MultipleTermLifeQuotePublic>
</soapenv:Body>
After transformation, when its passing through Business Service its giving the followin error at ALSB console
<soap:Body xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<soap:Fault>
<faultcode>soap:Server</faultcode>
<faultstring>
Server was unable to process request. ---> Object reference not set to an instance of an object. </faultstring>
<detail/>
</soap:Fault>
</soap:Body>
[b]When i am sending the same request through SOAP UI, I am getting a correct response.
Can any one guide me what to do regarding this, where i am going wrong.
Please try to reply as soon as possible. Its an urgent issue.

That error you're getting is a typical error message from Windows web services. It simply means there was something unspecified that was wrong with your message. You'll need to find a way to extract the actual message being sent in both the "good" and "bad" cases and look at the differences. You can do that in ALSB with a "Log" action.

SOAP Error : Server was unable to process request. Key cannot be null.#

HI, When I process SOAP call from ABAP using class csoaptransporthttp->request_response, I am getting following error message:
"Server was unable to process request. > Key cannot be null.##Parameter name: key"
Is anybody as the clue to resolve this error ?

Hi,
if you're doing a SOAP client - did you compare with this example:
http://help.sap.com/saphelp_47x200/helpdata/en/2d/64d053e74911d6b2e400508b6b8a93/content.htm
Regards,
Michal Krawczyk

ODBC Administrator (32-bit ..\SysWOW64\odbc32ad.exe) fails on System DSN add, with error code 126

Logging into W2008R2 server with ID which is a member of "Administrators" group. Installed 32-bit PostgreSQL driver via msi package. When using 32-bit ODBC Administrator to create "System DSN", receive error as follows:
"The setup routines for the PostgreSQL ANSI ODBC driver could not be loaded due to system error code 126: The specified module could not be found. (C:\psqlODBC\0903\bin\psqlodbc30a.dll).
I have verified the file does exist, by that name, in that location and the registry entries look good (I am not allowed to insert images until my account is "verified").
The ODBC Administrator lists the 32-bit driver (along with all the others) in the Drivers tab. I am successful creating a System DSN if I choose a different 32-bit driver (e.g. the IBM DB2 driver). Thank you for any direction you can provide.

Hi JMARKS6205-2,
Sorry for my delay.
Based on your description, it seems that you have checked the registry entries. On current situation, I suggest
that you should check again. Just to confirm.
Please open Registry Editor and navigate to the path: HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI
Since installation information for ODBC drivers is stored in this key. Please make sure that the required ODBC
driver file (psqlodbc30a.dll) is in the correct folder as described by the registry keys.
For more details, please refer to the following KB.
PRB: Error Message: "Could Not Load Translator or Setup
Library"
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

LR4 install fails on Win7 64-bit with Error Code 1935, error occurred during assembly component

I have successfully installed on my desktop with similar config, but laptop install fails. I'm going to redownload the package and try again gut looking for other suggestions

Check out this:
Error 1935 | Assembly component Microsoft.VC80.CRT | Install | CS4, CS5, CS5.5 products | Windows

Design Studio SDK: Eclipse fail to open Design Studio with error message

Hi,
Environment:
BO 4.1 SP2
Eclipse 4.3.2
I am learning Design Studio SDK using the Developer Guide Tutorial available in help.sap.com. I am trying to deploy the sample SDK component.
While I try to open Design Studio application from Eclipse, it throws below errors. Run As -> Eclipse Application.
Please help!
Thanks in Advance!
-Jeni

Hi Jenifer
It looks to me as if the JAVA Home Variable is not set?
To get to this in Windows 7 you need to right click on Computer and select properties
Then click Advanced System Settings, Then Click Environment Variables button,
Have you got a JAVA_HOME Variable as per the attached screenshot? Please not this need to point to the Java folder on your PC

Bugs in BC CRM web service need to be fix (Server was unable to process request ERROR: A server error has occured)

I'm using the following code to retrieve order list is working fine but it give me an error Server was unable to process request ERROR: A server error has occurred when I trying to retrieve order total paid with same code: and the output when retrieve order total paid is [object Object]
var wsUrl = "https://mysite.worldsecuresystems.com/CatalystWebService/CatalystCRMWebservice.asmx?WSDL";
                      var RetrieveTotalPaidXML =
                      '<?xml version="1.0" encoding="utf-8"?>\
                      <soap12:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" \
xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://www.w3.org/2003/05/soap-envelope">\
                      <soap12:Body>\
                      <Order_RetrieveTotalPaid xmlns="http://tempuri.org/CatalystDeveloperService/CatalystCRMWebservice">\
                      <username>user</username>\
                      <password>pass</password>\
                      <siteid>111222</siteid>\
                      <orderId>112345</orderId>\
                      </Order_RetrieveTotalPaid>\
                      </soap12:Body>\
                      </soap12:Envelope>';
                       $.ajax({
                        type: "POST",
                        url: wsUrl,
                        Host: "mysite.worldsecuresystems.com",
                        contentType: "application/soap+xml; charset=utf-8",
                        data: RetrieveTotalPaidXML,
                        dataType: "xml",
                        success: processSuccess,
                        error: function(){alert("Error: Something went wrong");}
                       function processSuccess(ResData) {
                       var RetrieveTotalPaidParse = $.parseXML(ResData);
                       var $xmlRetrieveTotalPaidParse = $(RetrieveTotalPaidParse);
                       var $Order_RetrieveTotalPaidResult = $xmlRetrieveTotalPaidParse.find('Order_RetrieveTotalPaidResult');
                               $Order_RetrieveTotalPaidResult = $(this).find('Order_RetrieveTotalPaidResult').text();
                               $('#RetrieveTotalPaidResult').text(Order_RetrieveTotalPaidResult);
I think there a bug in BC CRM Web Service when trying to make a request for Order_RetrieveTotalPaid using soap need to be fix

Perhaps it would be good to update the sample request as shown on the Developer reference page for this method (and, actually ALL of the SOAP samples)
The sample shows siteid (all lower case)

Server was unable to process request. --- ERROR: This site is not hosted on this data center C#

I am working with the API for the first time, and I am currently trying to figure out how to pull a list of products from a cat using the Product_ListRetrieve, I keep getting this error
Server was unable to process request. ---> ERROR: This site is not hosted on this data center

Okay so if anyone else is having these issues I found an answer for MVC3 C#:
Go into the Web Config and look at the Application Settings, by editing the URL there you can find a value containing the service url. add the subdomain there:
Example-
<applicationSettings>
    <ITCatExtend.Properties.Settings>
      <setting name="ITCatExtend_CRM_CatalystCRMWebservice" serializeAs="String">
        <value>https://Add the Sub Domain Here.worldsecuresystems.com/CatalystWebService/CatalystCRMWebservice.asmx</value>
      </setting>
      <setting name="ITCatExtend_Ecom_CatalystEcommerceWebservice"
        serializeAs="String">
        <value>https://Add the Sub Domain Here.worldsecuresystems.com/catalystwebservice/catalystecommercewebservice.asmx</value>
      </setting>
    </ITCatExtend.Properties.Settings>
</applicationSettings>

Installation of Photoshop update 13.1.2 for creative cloud fails with error code U44M1P7 I need help

I need help installing update 13.1.2 for Photoshop creative cloud, installation fails with error code: U44M1P7. Could someone please help?

Sorry to bother you.
I could find the answer after searching previous posts about this language problem.
Had to change my language in AAM profile and then download PS CS6 again ( english version ).
Then open the actual Photoshop and in preferences > interface you can besides the Dutch also option for English.
restart application and Voila.
Greetz, Jeroen

SSIS 2012: SSIS Error Code "Excel Connection Manager" failed with error code 0xC0202009.

Hi,
This is kind of weird issue that I am experiencing with excel connection manager in SSIS 2012. This issue occurs sometimes but when I close and re-open SSDT (SQL Server Data Tools - newer BIDS) then this issues goes off temporarily.
Just FYI, through SSDT environment I executed the package successfully with both settings Run64bit runtime setting to Yes and No when error does not occur.
So far I have installed
http://www.microsoft.com/en-us/download/details.aspx?id=13255 (Microsoft Access Database Engine 2010 Redistributable).
I still remember for older versions of SQL Server (2005 & 2008) that I have executed Excel connection SSIS packages with Run64bit runtime = false i.e. in 32-bit mode. As far as I know I think Excel 64-bit issue has been resolved with SQL Server
2012 release.
Here is the detail of error message:
TITLE: Package Validation Error
Package Validation Error
ADDITIONAL INFORMATION:
Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection
Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
Error at Data Flow Task: There were errors during task validation.
Error at Package [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
(Microsoft.DataTransformationServices.VsIntegration)
Here are my environment details:
SQL Server 2012 {Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) } , Excel 2010 (32-bit). I am developing SSIS code on Virtual desktops with Windows 7 32-bit OS.
Also it occurred to me that since Virtual Desktops are on Shared Infrastructure, the source files and SSIS packages (code) can be on Shared drives for e.g. \\<Corpnet>\userdata\<Corp_Users_Grp>\<Username>\Visual Studio 2010\Projects\Integration
Services Project2\Integration Services Project2\Package.dtsx.
Does this kind of Shared drives have any impact to give this issue?
Thanks in advance!
Ketan
P.S.: I had look at this forum question -->
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/903bbe1d-e070-4c43-9d3b-0a5193550029/64bit-error-in-excel-connection-manager-in-ssis

Hi Arthur,
Thanks for your response.
Yes, it looks like SSIS still has bunch of issues with Excel files like as follows:
1) Some times excel source files cannot be parsed by excel source connection manager.
2) For derive column conversion, we can't replace the existing column. rather, we have to add the derived column as " add as new column" which is tough to manage while destination mapping.
3) If an column in excel contains a data which is not of the data type assigned for the column in excel, the excel source reads that data as "null". For the same, we can't validate the data and redirect the erroneous data in reject file. <-- For
this we tried IMEX setting also
4) In multi-tab/sheet excel file, excel source is unable to detect a tab and identify the metadata of the excel.
I am also checking Microsoft connect for Excel issues with SSIS 2012(https://connect.microsoft.com/SQLServer/SearchResults.aspx?SearchQuery=excel#&&PageIndex=22
As worst case scenario, I am thinking of converting Excel to CSV file or Flat text file. (http://www.mssqltips.com/sqlservertip/2772/importing-data-from-excel-using-ssis--part-2/).
Do you think it is advisable to convert Excel into CSV or Flat file.
Thanks,
Ketan

EvtFormatMessage function fails with error code 15033 (ERROR_EVT_MESSAGE_LOCALE_NOT_FOUND) on non-English Windows OS

I have an App which subscribes to Windows events and if it is matching the filter criteria, it reports it.
I have observed a strange problem on non-English windows 2008 OS.
If the Windows event is of source = EventLog (e.g. Event ID 1102: Security log was cleared), then EvtFormatMessage fails with error code 15033. But if the event is of any other source (e.g. Microsoft Security Auditing), then it works absolutely fine.
While calling EvtOpenPublisherMetadata, I have created locale ID as MAKELCID(MAKELANGID(0x09,0x01) i.e. Primary language = LANG_ENGLISH and Sub Language = SUBLANG_DEFAULT.
I want events details in English only and hence primary language is put as English. If I change this macro to have primary language as LANG_CHINESE and sub language as SUBLANG_CHINESE_SIMPLIFIED, then it works fine but gives back event details in native
OS language (Chinese in this case). That's not a desirable output for me.
Following is the way I'm calling EvtFormatMessage
EvtFormatMessage(hMetaData, hEvent[0], -1, 0, NULL,
1 /* EvtFormatMessageEvent */,
m_pTextBufferSize/sizeof(WCHAR),
m_pTextBuffer, &dwBuffUsed);
A work-around for this is to install a MUI pack for English language. If the MUI pack is installed then it works fine. But I cannot enforce users to have this pack installed on all their systems.
My question is why this API is working for some set of Events whereas failing for some specific Events? Am I doing something wrong?
Any help would be appreciated.
TIA,
Regards,
Yogesh

Was on vacation and hence the delay in replying.
As mentioned earlier, while calling EvtOpenPublisherMetadata, I have created locale ID as MAKELCID(MAKELANGID(0x09,0x01)
i.e. Primary language = LANG_ENGLISH and Sub Language = SUBLANG_DEFAULT. If I change this macro
to have primary language as LANG_CHINESE and sub language as SUBLANG_CHINESE_SIMPLIFIED, then it works fine but gives back event details in native OS language (Chinese in this case).
This is not an option for me as I want event details in English language only.
Regards,
Yogesh
Regards, Yogesh

The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppres

I am looking at an issue with users not getting specific group policies.
After searching a number of client computers I found that the following error
The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppressed.
I can find the folder in the Sysvol folder on all of the domain controllers.
The issue with end users seems to be that the proxy settings for internet explorer is not being applied.
Potential problems?
one folder in sysvol entry is empty
\\<server>\SYSVOL\<domain.name>\Policies\{E03166E7-A848-48B5-AA93-97B848AA9C13}\User\microsoft\IEAK\LOCK
or is this our issue
The old method of configuring proxy settings to Internet Explorer 9 has changed?
https://support2.microsoft.com/kb/2530309?wa=wsignin1.0
http://thommck.wordpress.com/2013/11/08/the-new-way-to-configure-internet-explorer-proxy-settings-with-group-policy/

Hi all
In administering this policy I am a little confused.
We have a policy that distributes proxy settings in the internet explorer maintenance settings section - however when opening this policy up in GPO editor the internet explorer maintenance section is not present.
I plan to apply the settings via User/preferences/control panel settings/ internet settings (or registry settings from article) however I am unable to edit the settings for internet explorer maintenance and these will persist. Ideas????

Failed to Open FR report With Error code 500 - 'unable to process request'

Similar Messages

Maybe you are looking for