Failed trying to read text....

My Systems working like this, client open page with browser,and see some text at the page...
Back end Working :
RMIServer try to read some file with read code like this :
fileRead = new FileInputStream("UIA.txt");
inputServer = new BufferedReader(new InputStreamReader(fileRead));
Client request via browser, and display result it in the browser (result is the content of UIA.txt, which is send from RMIServer) the result i put on ArrayList on the Client file, but if i try to use, RMIServer display the Exception like this :
java.io.FileNotFoundException: UIA.txt (The system cannot find the file specified) at RMIServer console.
Where should i put my UIA.txt file at Tomcat 5.5 ??
Direcory Structure like this :
-Webapps
--console // My working folder
----WEB-INF
-------classes
----------cmd // folder where i put all class file, include RMIServer,UIA.txt ,etc..
Thanks guys...

http://forum.java.sun.com/thread.jspa?threadID=186035&messageID=596014
About half way down the above thread you may find some helpful information.

Similar Messages

  • Reading text file to JEditorPane

    Hi,
    I'm trying to read text file to JEditorPane and it works but first line is always missing. Here is the code for reading:
    try {
       in = new BufferedReader(new FileReader(filePathIn));
       while ((lineIn = in.readLine()) != null) {
            editorPane.read(in, new Object());
    } catch (IOException ie)...Any suggestions?

    in.readLine is changing the input stream position.
    Do this instead:
    FileInputStream in = new FileInputStream(filePathIn);
    while (in.available() != 0)
        editorPane.read(in, new Object());

  • Keep getting an error message that reads, "LR An error has occurred while creating the book on Blurb" An error has occurred while trying to create texts and fonts.  Pleas advise as Blurb has said that it's a LR issue.

    Keep getting an error message that reads, "LR An error has occurred while creating the book on Blurb" An error has occurred while trying to create texts and fonts.  Pleas advise as Blurb has said that it's a LR issue.

    Are you behind a firewall or double NAT??
    What is the device that is immediately plugged into the main modem or router? Has that one been able to update?
    It is plugged in of course isn't it.. no nasty join wireless anywhere??
    The best way to work around these sort of problems is to simplify the network.. Plug each device directly into the main router.. by ethernet. You can trigger the firmware upgrade by wireless but use ipad or iphone version of airport utility and see what happens.

  • How to solve 'Reading Text Global Resources... Done' hang on loading CS v8.0 when all else fails?

    I have spent a day trying unsuccessfully to load CS version 8.0 in Windows 7, following a crash. The load proceeds until the message:
    'Reading Text Global Resources... Done', and then it hangs.
    I have tried clearing the Prefs files of all files. Didn't work.
    I have tried deleting PS altogether and reinstalling the program from the disk. Didn't work, and the Prefs files are empty now.
    I have tried removing most of my fonts*, and it still hangs. Those not removed were the ones the system would not allow me to move or delete.
    I have tried removing recent plug ins and software updates that might have caused the problem, specifically Adobe Flash and Java. Didn't work.
    What next, any ideas?
    In the panic we all know and love,
    Peter
    *in Program Files\Common Files\Adobe\Fonts or Windows\Fonts, can't remember which - does it matter?

    Hi Cooper,
    If you found any other solution in these days other than the code mentioned above please let me know as i have a similar requirement now.
    As you mentioned "It is not possible to modify variants with values longer than 45 characters",
    So if this is not possible then how can we resolve this issue.
    Thanks in advance.

  • Trying to read the text file via Flex FileStream.

    Hello,
    I am following the Flex Help and trying to read a text file.
    I have created project called test, and within test.mxml, I have
    created the <mx:script> tags and within I am pasting this
    code yet I get errors:
    What am I doing wrong? Please help.
    Please see the code:

    You cannot do all that complex assignment work outside of a
    function. Because of the way components are generated/compiled, the
    declared vars do not exist when called.
    Declare the vars in instance scope, but use an init()
    function to do the assignments.

  • Java.sql.SQLException: Error while trying to retrieve text for error ORA-24

    Hi All,
    Am having serious problem with ORA-24327 and the behavior is very very unpredictable. I have couple of environment where the same error comes in different context. The recent one was surprising. I have describe bellow the environment configuration and the stack trace. The error which surprised me was when I use type � 3 driver while starting weblogic I get ORA �24327 but when I use Type �4 it starts properly. If you could kindly provide solution it would be great help. I would also appreciate if u can provide information which driver to use where performance is the major concern. I would also appreciate if u could provide feed-back from the industry about booth the driver. Apart from that I have couple have environment where it occurs when 10/12 user access simultaneously. All the open connection is closed in program properly still am getting the error.
    Thanks in anticipation.
    Cheers,
    Tapas
    Environment
    OS - SunOS 5.8 Generic_108528-07 sun4u sparc SUNW,Ultra-Enterprise
    JDK - Solaris VM (build Solaris_JDK_1.2.2_07, native threads, sunwjit)
    Weblogic - 5.1.0 Service Pack 9 04/05/2001 14:59:53 #105983
    Oracle � 8.1.6
    Delaying 10 seconds before making a beuatpool pool connection.
    Pool 1 (Type �3 )
    weblogic.jdbc.connectionPool.beuatpool=\
    url=jdbc:weblogic:oracle,\
    driver=weblogic.jdbc.oci.Driver,\
    loginDelaySecs=10,\
    initialCapacity=10,\
    maxCapacity=20,\
    capacityIncrement=2,\
    allowShrinking=true,\
    shrinkPeriodMins=10,\
    refreshMinutes=10,\
    testTable=dual,\
    props=user=xxx;password=xxx;server=xxxx
    Pool 2(Type �4)
    weblogic.jdbc.connectionPool.thinPool=\
    url=jdbc:oracle:thin:@xxx:1521:xxx,\
    driver=oracle.jdbc.driver.OracleDriver,\
    loginDelaySecs=1,\
    initialCapacity=1,\
    maxCapacity=10,\
    capacityIncrement=1,\
    allowShrinking=true,\
    shrinkPeriodMins=15,\
    refreshMinutes=15,\
    testTable=dual,\
    props=user=xxx;password=xxx;server=xxx:1521:xxx
    allow=everyone
    ---------- LOGIN ERROR CODE: 24327
    java.sql.SQLException: Error while trying to retrieve text for error ORA-24327 �
    at java.lang.Throwable.fillInStackTrace(Native Method)
    at java.lang.Throwable.fillInStackTrace(Compiled Code)
    at java.lang.Throwable.<init>(Compiled Code)
    at java.lang.Exception.<init>(Compiled Code)
    at java.sql.SQLException.<init>(SQLException.java:43)
    at weblogic.db.oci.OciConnection.getLDAException(OciConnection.java:143)
    at weblogic.jdbcbase.oci.Driver.connect(Driver.java:157)
    at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Con
    nectionEnvFactory.java:149)
    at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Con
    nectionEnvFactory.java:109)
    at weblogic.common.internal.ResourceAllocator.makeResources(Compiled Cod
    e)
    at weblogic.common.internal.ResourceAllocator.<init>(Compiled Code)
    at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.j
    ava:330)
    at weblogic.jdbc.common.internal.JdbcInfo.initPools(Compiled Code)
    at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:200)
    at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
    at java.lang.reflect.Method.invoke(Native Method)
    at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
    at weblogic.t3.srvr.StartupThread.doWork(Compiled Code)
    at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java
    :62)
    ---------- LOGIN ERROR CODE: 24327
    ---------- LOGIN ERROR CODE: 24327
    Fri Aug 31 00:57:22 GMT-05:00 2001:<I> <JDBC Pool> Sleeping in createResource()
    Fri Aug 31 00:57:23 GMT-05:00 2001:<E> <JDBC Pool> Failed to create connection p
    ool "beuatpool"
    weblogic.common.ResourceException: weblogic.common.ResourceException:
    Could not create pool connection. The DBMS driver exception was:
    java.sql.SQLException: Error while trying to retrieve text for error ORA-24327 -
    at java.lang.Throwable.fillInStackTrace(Native Method)
    at java.lang.Throwable.fillInStackTrace(Compiled Code)
    at java.lang.Throwable.<init>(Compiled Code)
    at java.lang.Exception.<init>(Compiled Code)
    at java.sql.SQLException.<init>(SQLException.java:43)
    at weblogic.db.oci.OciConnection.getLDAException(OciConnection.java:143)
    at weblogic.jdbcbase.oci.Driver.connect(Driver.java:157)
    at java.sql.DriverManager.getConnection(Compiled Code)
    at java.sql.DriverManager.getConnection(DriverManager.java:137)
    at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Con
    nectionEnvFactory.java:172)
    at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Con
    nectionEnvFactory.java:109)
    at weblogic.common.internal.ResourceAllocator.makeResources(Compiled Cod
    e)
    at weblogic.common.internal.ResourceAllocator.<init>(Compiled Code)
    at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.j
    ava:330)
    at weblogic.jdbc.common.internal.JdbcInfo.initPools(Compiled Code)
    at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:200)
    at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
    at java.lang.reflect.Method.invoke(Native Method)
    at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
    at weblogic.t3.srvr.StartupThread.doWork(Compiled Code)
    at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java
    :62)
    at java.lang.Throwable.fillInStackTrace(Native Method)
    at java.lang.Throwable.fillInStackTrace(Compiled Code)
    at java.lang.Throwable.<init>(Compiled Code)
    at java.lang.Exception.<init>(Compiled Code)
    at weblogic.common.ResourceException.<init>(ResourceException.java:18)
    at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Con
    nectionEnvFactory.java:182)
    at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Con
    nectionEnvFactory.java:109)
    at weblogic.common.internal.ResourceAllocator.makeResources(Compiled Cod
    e)
    at weblogic.common.internal.ResourceAllocator.<init>(Compiled Code)
    at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.j
    ava:330)
    at weblogic.jdbc.common.internal.JdbcInfo.initPools(Compiled Code)
    at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:200)
    at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
    at java.lang.reflect.Method.invoke(Native Method)
    at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
    at weblogic.t3.srvr.StartupThread.doWork(Compiled Code)
    at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java
    :62)
    at java.lang.Throwable.fillInStackTrace(Native Method)
    at java.lang.Throwable.fillInStackTrace(Compiled Code)
    at java.lang.Throwable.<init>(Compiled Code)
    at java.lang.Exception.<init>(Compiled Code)
    at weblogic.common.ResourceException.<init>(ResourceException.java:18)
    at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Con
    nectionEnvFactory.java:125)
    at weblogic.common.internal.ResourceAllocator.makeResources(Compiled Cod
    e)
    at weblogic.common.internal.ResourceAllocator.<init>(Compiled Code)
    at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.j
    ava:330)
    at weblogic.jdbc.common.internal.JdbcInfo.initPools(Compiled Code)
    at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:200)
    at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
    at java.lang.reflect.Method.invoke(Native Method)
    at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
    at weblogic.t3.srvr.StartupThread.doWork(Compiled Code)
    at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java
    :62)

    Hi,
    I guess you can try some of these:
    - Make sure you're not missing an entry inside your tnsnames.ora file. Thin driver does not require the information inside that file, as opposed to Weblogic's OCI driver. If you are able to connect to the DB using a thin driver, then the problem is most probably (WL)driver-related.
    - Make sure you've properly configured the DB user / password inside your weblogic.properties (config.xml if WL6+).
    - Make sure you're able to access all drivers and classes required (PATH, CLASSPATH, etc...)
    - Make sure the OCI driver version you are using is fully compatible with the Oracle (server) version you are pointing to.
    - Try to access the DB user through some other client (for instance, SQLPlus*).
    Hope this is of some help,
    Freddy.

  • Error while trying to retrieve text for error ORA-03113"

    We face an error saying "Error while trying to retrieve text for error ORA-03113" in our Mail trigger application.
    This error happens randomly
    This is the below error i am getting
    I see from the logs
    DBD::Oracle::st execute failed: Error while trying to retrieve text for error ORA-03113 (DBD ERROR: OCIStmtExecute) [for State ment " insert into matrix_tbl (created_tm, tran_id, matrix_id, client_id, mailing_id, block_id, slist_id, profile_blob, profil e_id, plist_id, profile_key, email_addr, mail_pref, mail_pref_mask, alt_email_addr, num_ftd, pct_id )  SELECT sysdate, 0 , 619
    70818 , 7180280 , 39868792 , ?, 0 ,   substr( 'MT' || chr(1) || ''   || chr(1) || 'PAPER_USAGE' || chr(1) || s.C26 || chr(1) |
    | 'GARDEN' || chr(1) || s.C17 || chr(1) || 'TAG' || chr(1) || s.C34 ||
    | chr(1) || 'PASS_MAILING' || chr(1) || s.C27 || chr(1) | 'MS' || chr(1) || s.C24 || chr(1) || 'OPTIN_SOURCE' || chr(1) || s.C25 || chr(1) || 'DAILY' || chr(1) || s.C7 || chr(1) || '
    PROFILE_LIST' || chr(1) || s.C28 || chr(1) || 'HI' || chr(1) || s.C20 || chr(1) || 'EXIST_MAILING' || chr(1) || s.C11 || chr(1
    ) || 'RPASS2' || chr(1) || s.C30 || chr(1) || 'FORWARD_MAILING' || chr(1) || s.C15 || chr(1) || 'ACCESS' || chr(1) || s.C1 ||
    chr(1) || 'TRAVCON' || chr(1) || s.C35 || chr(1) || 'RPASS1' || chr(1) || s.C29 || chr(1) || 'FINANCE' || chr(1) || s.C12 || c
    hr(1) || 'CONFIRM_MAILING' || chr(1) || s.C5 || chr(1) || 'VENT' || chr(1) || s.C38 || chr(1) || 'SRC' || chr(1) || s.C32 || c
    hr(1) || 'DELIVERY' || chr(1) || s.C8 || chr(1) || 'SALUTATION' || chr(1) || s.C31 || chr(1) || 'UNTITLEDY' || chr(1) || s.C37  || chr(1) || 'CU18' || chr(1) || s.C6 || chr(1) || 'BIRTH_DATE' || chr(1) || s.C3 || chr(1) || 'BIRTH_YEAR' || chr(1) || s.C4  || chr(1) || 'DOWNLOAD' || chr(1) || s.C9 || chr(1) || 'LN' || chr(1) || s.C22 || chr(1) || 'VIRAL_LIST' || chr(1) || s.C39 |
    | chr(1) || 'GENDER' || chr(1) || s.C18 || chr(1) || 'WEEKLY' || chr(1)
    | || s.C40 || chr(1) || 'UNTITLEDX' || chr(1) || s.C36 |
    | chr(1) || 'ENTERTAINMENT' || chr(1) || s.C10 || chr(1) || 'HEALTH' ||
    | chr(1) || s.C19 || chr(1) || 'INCOME' || chr(1) || s.C
    21 || chr(1) || 'FN' || chr(1) || s.C13 || chr(1) || 'ZIP' || chr(1) || s.C41 || chr(1) || 'AGE' || chr(1) || s.C2 || chr(1) |
    | 'FOOD' || chr(1) || s.C14 || chr(1) || 'SUPPRESS' || chr(1) || s.C33
    | || chr(1) || 'FTD_REVAL_DATE' || chr(1) || s.C16 || chr
    (1) || 'MOVIE' || chr(1) || s.C23 , 0,3999) , s.profile_id, s.plist_id, s.profile_key, s.email_addr , s.mail_pref, s.mail_pref _mask, s.alt_email_addr, srt.num_ftd, s.block_id FROM subscriber_tbl s, sub_report_tbl srt WHERE s.plist_id = ?
    and s.block_id
    = ? and srt.plist_id = ? and srt.block_id = ?  and s.profile_id = srt.profile_id
        and nvl(srt.num_optout, 0) = 0 and nvl(srt.num_ftd, 0) <= 3 and srt.optin_mask like '%N01%'"
        with ParamValues: :p5='1941860', :p3='1941860', :p1=1, :p4='28895423', :p2='28895423'] at hcommon.pm line 1277.
    AJC MAILTRIGGER STH Error while trying to retrieve text for error ORA-03113 (DBD ERROR: OCIStmtExecute)

    An ORA-03113 error would mean that the connection to the database no longer exists so any attempt to get the error message from the the database would result in an error. I think the real issue might be why was the session interrupted.
    03113, 00000, "end-of-file on communication channel"
    Depending on the front-end tool a pointer error or failure to properly terminate a string could result in corrupting the message to Oracle.
    There have been numerous bugs over the years that have resulted in this error message being returned. I notice that the Oracle version, platform, edition, and client tool set are not mentioned in the post. All this would potentially be important information for someone to recognize what might be the problem.
    I would look very closely at the code " at hcommon.pm line 1277 "
    HTH -- Mark D Powell --

  • LPX-00601: Invalid token in: err while trying to read data from xml

    Hey ,
    While trying to read data from xml i got err:
    LPX-00601: Invalid token in: 'path'
    the proc. i'm using to read data from the xml is:
    procedure read_xml_file_test (in_filename in varchar2)
    is
    my_dir  varchar2(20) := 'XML_DIR;
      cur_emp2 number:=0;
      l_bfile   BFILE;
      l_clob    CLOB;
      l_parser  dbms_xmlparser.Parser;
      l_doc     dbms_xmldom.DOMDocument;
      l_nl      dbms_xmldom.DOMNodeList;
      l_nl2    dbms_xmldom.DOMNodeList;
      l_n       dbms_xmldom.DOMNode; 
      l_n2     dbms_xmldom.DOMNode;
      l_temp    VARCHAR2(1000);
    v_errors        internet_clients.errors%type; 
    src_csid       NUMBER := NLS_CHARSET_ID('UTF8'); 
    dest_offset    INTEGER := 1;
    src_offset     INTEGER := 1;
    lang_context   INTEGER := dbms_lob.default_lang_ctx;
    warning        INTEGER;
    v_count       number := 0;   --total records
    v_count_s      number := 0;   -- sucsess record
    v_count_f      number := 0;   -- failed record
    v_flag varchar2(1);
    v_char2 varchar2(1);
    v_l1 VARCHAR2(255);
    v_l2 VARCHAR2(255);
    v_l3 VARCHAR2(255);
    v_l4 VARCHAR2(255);
    v_l6 VARCHAR2(255);
    BEGIN
      l_bfile := BFileName(my_dir, in_filename);
      dbms_lob.createtemporary(l_clob, cache=>FALSE);
      dbms_lob.open(l_bfile, dbms_lob.lob_readonly);
      dbms_lob.loadclobfromfile(l_clob, l_bfile, dbms_lob.getlength(l_bfile), dest_offset,src_offset, src_csid, lang_context, warning);                        
      dbms_lob.close(l_bfile);
      -- make sure implicit date conversions are performed correctly
      dbms_session.set_nls('NLS_DATE_FORMAT','''DD/MM/RR HH24:MI:SS''');   
      -- Create a parser.
      l_parser := dbms_xmlparser.newParser;
      -- Parse the document and create a new DOM document.
        dbms_xmlparser.parseClob(l_parser, l_clob);
        l_doc := dbms_xmlparser.getDocument(l_parser);
      -- Free resources associated with the CLOB and Parser now they are no longer needed.
      dbms_lob.freetemporary(l_clob);
      dbms_xmlparser.freeParser(l_parser);  
      -- Get a list of all the  nodes in the document using the XPATH syntax.
      l_nl := dbms_xslprocessor.selectNodes(dbms_xmldom.makeNode(l_doc),'soap:Envelope/soap:Body/GetFieldsNameResponse/GetFieldsNameResult/diffgr:diffgram/DataSet_FRM_GANERIC_PROP/FRM_GANERIC_PROP');
      -- Loop through the list and create a new record in a tble collection
      -- for each  record.
      FOR cur_emp IN 0 .. dbms_xmldom.getLength(l_nl) - 1 LOOP
       l_n := dbms_xmldom.item(l_nl, cur_emp);
       cur_emp2:=0;
       loop
         v_count := v_count + 1;
         begin
        -- Use XPATH syntax to assign values to he elements of the collection.
        dbms_xslprocessor.valueOf(l_n,'L1/text()',v_l1);
        dbms_xslprocessor.valueOf(l_n,'L2/text()',v_l2);
        dbms_xslprocessor.valueOf(l_n,'L3/text()',v_l3);
        dbms_xslprocessor.valueOf(l_n,'L4/text()',v_l4);
        dbms_xslprocessor.valueOf(l_n,'L6/text()',v_l6);
            exception
      when others then 
      null;
      end;
    exit when cur_emp2=dbms_xmldom.getLength(l_nl2);
      END LOOP;
      end loop;
      -- Free any resources associated with the document now it
      -- is no longer needed.
      dbms_xmldom.freeDocument(l_doc);
      --remove file to another directory   
          --COMMIT;  -- do not use the commit if you want to run this proc. from within the search_dir_list proc , because it execute a select from tmp table dir_list which contain a "on commit delete rows"  clause.    
      /*EXCEPTION
      /*WHEN OTHERS THEN
       dbms_lob.freetemporary(l_clob);
        dbms_xmlparser.freeParser(l_parser);
       dbms_xmldom.freeDocument(l_doc);
        null;
        ROLLBACK; */
    END;While trying to execute this i got:
    ORA-31011: XML parsing failed
    ORA-19202: Error occurred in XML processing
    LPX-00601: Invalid token in: 'soap:Envelope/soap:Body/GetFieldsNameResponse/GetFieldsNameResult/diffgr:diffgram/DataSet_FRM_GANERIC_PROP/FRM_GANERIC_PROP'
    ORA-06512: at "XDB.DBMS_XSLPROCESSOR", line 939
    ORA-06512: at "XDB.DBMS_XSLPROCESSOR", line 967
    ORA-06512: at "MARKET.READ_XML_FILE_TEST", line 51
    ORA-06512: at line 1
    i guess i mised somthing at the line
    l_nl := dbms_xslprocessor.selectNodes(dbms_xmldom.makeNode(l_doc),'soap:Envelope/soap:Body/GetFieldsNameResponse/GetFieldsNameResult/diffgr:diffgram/DataSet_FRM_GANERIC_PROP/FRM_GANERIC_PROP');i attached here part of my xml:
    <?xml version="1.0" encoding="UTF-8" ?>
    - <soap:Envelope xmlns:soap="http://www.w3.org/2003/05/soap-envelope" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
    - <soap:Body>
    - <GetFieldsNameResponse xmlns="http://tempuri.org/">
    - <GetFieldsNameResult>
    - <xs:schema id="DataSet_FRM_GANERIC_PROP" xmlns="" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
    - <xs:element name="DataSet_FRM_GANERIC_PROP" msdata:IsDataSet="true" msdata:Locale="he-IL">
    - <xs:complexType>
    - <xs:choice minOccurs="0" maxOccurs="unbounded">
    - <xs:element name="FRM_GANERIC_PROP">
    - <xs:complexType>
    - <xs:sequence>
      </xs:sequence>
      </xs:complexType>
      </xs:element>
      </xs:choice>
      </xs:complexType>
      </xs:element>
      </xs:schema>
    - <diffgr:diffgram xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" xmlns:diffgr="urn:schemas-microsoft-com:xml-diffgram-v1">
    - <DataSet_FRM_GANERIC_PROP xmlns="">
    - <FRM_GANERIC_PROP diffgr:id="FRM_GANERIC_PROP1" msdata:rowOrder="0">
      <L1>val1</L1>
      <L2>val2</L2>
      <L3>val3</L3>
      <L4>val4</L4>
      <L6>val6</L6>
      </FRM_GANERIC_PROP>
      </DataSet_FRM_GANERIC_PROP>
      </diffgr:diffgram>
      </GetFieldsNameResult>
      </GetFieldsNameResponse>
      </soap:Body>
      </soap:Envelope>I Guess it somthing that have to do with node definition ,
    but i have tried so many combinations and none ot those worked for me.
    i'm deeply stuck here.
    What do i miss here?
    THANKS yair
    Edited by: yair_k on 02:30 14/10/2010

    Hey , after got a lot of success with the xml reading part , i wonder if you
    can help me with a problem while trying to reading that xml from a web service.
    i use a procedure as followes:
    FUNCTION read_from_web_service(in_username in varchar2 , in_password in varchar2)
      RETURN CHAR
    AS
      l_service          UTL_DBWS.service;
      l_call             UTL_DBWS.call;
      l_a_ns                     VARCHAR2(32767);
      l_wsdl_url         VARCHAR2(32767);
      l_namespace        VARCHAR2(32767);
      l_service_qname    UTL_DBWS.qname;
      l_port_qname       UTL_DBWS.qname;
      l_operation_qname  UTL_DBWS.qname;
      l_xmltype_in       SYS.XMLTYPE;
      l_xmltype_out      SYS.XMLTYPE;
      l_return           VARCHAR2(32767);
    BEGIN
      l_wsdl_url        := 'http://www.company.com/publisherService/ServiceGetpublisherTable.asmx?wsdl';
      l_namespace       := 'http://tempuri.org/';
      l_service_qname   := UTL_DBWS.to_qname(l_namespace, 'ServiceGetpublisherTable');
      l_port_qname      := UTL_DBWS.to_qname(l_namespace, 'ServiceGetpublisherTableSoap');
      l_operation_qname := UTL_DBWS.to_qname(l_namespace, 'GetFieldsName');
      l_service := UTL_DBWS.create_service (
        wsdl_document_location => URIFACTORY.getURI(l_wsdl_url),
        service_name           => l_service_qname);
      l_call := UTL_DBWS.create_call (
        service_handle => l_service,
        port_name      => l_port_qname,
        operation_name => l_operation_qname);
      l_xmltype_in := SYS.XMLTYPE('<?xml version="1.0" encoding="utf-8"?>
        <GetFieldsName xmlns="' || l_namespace || '">
        <user>' || in_username || '</user>
        <password>'|| in_password || '</password>
        </GetFieldsName>');
      l_xmltype_out := UTL_DBWS.invoke(call_Handle => l_call,
                                       request     => l_xmltype_in);
      UTL_DBWS.release_call (call_handle => l_call);
      UTL_DBWS.release_service (service_handle => l_service);
      l_return := l_xmltype_out.extract('//GetFieldsName/text()').getstringVal();
       dbms_output.put_line(l_return);     
      RETURN l_return;
    END;but when i run it i got message:
    ORA-29532: Java call terminated by uncaught Java exception: javax.xml.rpc.soap.SOAPFaultException: Server did not recognize the value of HTTP Header SOAPAction: .
    regarding the line:
    l_xmltype_out := UTL_DBWS.invoke(call_Handle => l_call,
    request => l_xmltype_in);
    So , i deeply stuck here!
    my web service description is:
      <?xml version="1.0" encoding="utf-8" ?>
    - <wsdl:definitions xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://tempuri.org/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
    - <wsdl:types>
    - <s:schema elementFormDefault="qualified" targetNamespace="http://tempuri.org/">
    - <s:element name="GetFieldsName">
    - <s:complexType>
    - <s:sequence>
      <s:element minOccurs="0" maxOccurs="1" name="user" type="s:string" />
      <s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" />
      </s:sequence>
      </s:complexType>
      </s:element>
    - <s:element name="GetFieldsNameResponse">
    - <s:complexType>
    - <s:sequence>
    - <s:element minOccurs="0" maxOccurs="1" name="GetFieldsNameResult">
    - <s:complexType>
    - <s:sequence>
      <s:element ref="s:schema" />
      <s:any />
      </s:sequence>
      </s:complexType>
      </s:element>
      </s:sequence>
      </s:complexType>
      </s:element>
    - <s:element name="GetMSG_ByUser_Not_Readed">
    - <s:complexType>
    - <s:sequence>
      <s:element minOccurs="0" maxOccurs="1" name="user" type="s:string" />
      <s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" />
      </s:sequence>
      </s:complexType>
      </s:element>
    - <s:element name="GetMSG_ByUser_Not_ReadedResponse">
    - <s:complexType>
    - <s:sequence>
    - <s:element minOccurs="0" maxOccurs="1" name="GetMSG_ByUser_Not_ReadedResult">
    - <s:complexType>
    - <s:sequence>
      <s:element ref="s:schema" />
      <s:any />
      </s:sequence>
      </s:complexType>
      </s:element>
      </s:sequence>
      </s:complexType>
      </s:element>
    - <s:element name="SetMSG_ByUser_Not_Readed_As_Readed">
    - <s:complexType>
    - <s:sequence>
      <s:element minOccurs="0" maxOccurs="1" name="user" type="s:string" />
      <s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" />
      <s:element minOccurs="0" maxOccurs="1" name="Rec_Id" type="s:string" />
      </s:sequence>
      </s:complexType>
      </s:element>
    - <s:element name="SetMSG_ByUser_Not_Readed_As_ReadedResponse">
    - <s:complexType>
    - <s:sequence>
      <s:element minOccurs="1" maxOccurs="1" name="SetMSG_ByUser_Not_Readed_As_ReadedResult" type="s:boolean" />
      </s:sequence>
      </s:complexType>
      </s:element>
      </s:schema>
      </wsdl:types>
    - <wsdl:message name="GetFieldsNameSoapIn">
      <wsdl:part name="parameters" element="tns:GetFieldsName" />
      </wsdl:message>
    - <wsdl:message name="GetFieldsNameSoapOut">
      <wsdl:part name="parameters" element="tns:GetFieldsNameResponse" />
      </wsdl:message>
    - <wsdl:message name="GetMSG_ByUser_Not_ReadedSoapIn">
      <wsdl:part name="parameters" element="tns:GetMSG_ByUser_Not_Readed" />
      </wsdl:message>
    - <wsdl:message name="GetMSG_ByUser_Not_ReadedSoapOut">
      <wsdl:part name="parameters" element="tns:GetMSG_ByUser_Not_ReadedResponse" />
      </wsdl:message>
    - <wsdl:message name="SetMSG_ByUser_Not_Readed_As_ReadedSoapIn">
      <wsdl:part name="parameters" element="tns:SetMSG_ByUser_Not_Readed_As_Readed" />
      </wsdl:message>
    - <wsdl:message name="SetMSG_ByUser_Not_Readed_As_ReadedSoapOut">
      <wsdl:part name="parameters" element="tns:SetMSG_ByUser_Not_Readed_As_ReadedResponse" />
      </wsdl:message>
    - <wsdl:portType name="ServiceGetpublisherTableSoap">
    - <wsdl:operation name="GetFieldsName">
      <wsdl:input message="tns:GetFieldsNameSoapIn" />
      <wsdl:output message="tns:GetFieldsNameSoapOut" />
      </wsdl:operation>
    - <wsdl:operation name="GetMSG_ByUser_Not_Readed">
      <wsdl:input message="tns:GetMSG_ByUser_Not_ReadedSoapIn" />
      <wsdl:output message="tns:GetMSG_ByUser_Not_ReadedSoapOut" />
      </wsdl:operation>
    - <wsdl:operation name="SetMSG_ByUser_Not_Readed_As_Readed">
      <wsdl:input message="tns:SetMSG_ByUser_Not_Readed_As_ReadedSoapIn" />
      <wsdl:output message="tns:SetMSG_ByUser_Not_Readed_As_ReadedSoapOut" />
      </wsdl:operation>
      </wsdl:portType>
    - <wsdl:binding name="ServiceGetpublisherTableSoap" type="tns:ServiceGetpublisherTableSoap">
      <soap:binding transport="http://schemas.xmlsoap.org/soap/http" />
    - <wsdl:operation name="GetFieldsName">
      <soap:operation soapAction="http://tempuri.org/GetFieldsName" style="document" />
    - <wsdl:input>
      <soap:body use="literal" />
      </wsdl:input>
    - <wsdl:output>
      <soap:body use="literal" />
      </wsdl:output>
      </wsdl:operation>
    - <wsdl:operation name="GetMSG_ByUser_Not_Readed">
      <soap:operation soapAction="http://tempuri.org/GetMSG_ByUser_Not_Readed" style="document" />
    - <wsdl:input>
      <soap:body use="literal" />
      </wsdl:input>
    - <wsdl:output>
      <soap:body use="literal" />
      </wsdl:output>
      </wsdl:operation>
    - <wsdl:operation name="SetMSG_ByUser_Not_Readed_As_Readed">
      <soap:operation soapAction="http://tempuri.org/SetMSG_ByUser_Not_Readed_As_Readed" style="document" />
    - <wsdl:input>
      <soap:body use="literal" />
      </wsdl:input>
    - <wsdl:output>
      <soap:body use="literal" />
      </wsdl:output>
      </wsdl:operation>
      </wsdl:binding>
    - <wsdl:binding name="ServiceGetpublisherTableSoap12" type="tns:ServiceGetpublisherTableSoap">
      <soap12:binding transport="http://schemas.xmlsoap.org/soap/http" />
    - <wsdl:operation name="GetFieldsName">
      <soap12:operation soapAction="http://tempuri.org/GetFieldsName" style="document" />
    - <wsdl:input>
      <soap12:body use="literal" />
      </wsdl:input>
    - <wsdl:output>
      <soap12:body use="literal" />
      </wsdl:output>
      </wsdl:operation>
    - <wsdl:operation name="GetMSG_ByUser_Not_Readed">
      <soap12:operation soapAction="http://tempuri.org/GetMSG_ByUser_Not_Readed" style="document" />
    - <wsdl:input>
      <soap12:body use="literal" />
      </wsdl:input>
    - <wsdl:output>
      <soap12:body use="literal" />
      </wsdl:output>
      </wsdl:operation>
    - <wsdl:operation name="SetMSG_ByUser_Not_Readed_As_Readed">
      <soap12:operation soapAction="http://tempuri.org/SetMSG_ByUser_Not_Readed_As_Readed" style="document" />
    - <wsdl:input>
      <soap12:body use="literal" />
      </wsdl:input>
    - <wsdl:output>
      <soap12:body use="literal" />
      </wsdl:output>
      </wsdl:operation>
      </wsdl:binding>
    - <wsdl:service name="ServiceGetpublisherTable">
    - <wsdl:port name="ServiceGetpublisherTableSoap" binding="tns:ServiceGetpublisherTableSoap">
      <soap:address location="http://www.company.com/publisherService/ServiceGetpublisherTable.asmx" />
      </wsdl:port>
    - <wsdl:port name="ServiceGetpublisherTableSoap12" binding="tns:ServiceGetpublisherTableSoap12">
      <soap12:address location="http://www.company.com/publisherService/ServiceGetpublisherTable.asmx" />
      </wsdl:port>
      </wsdl:service>
      </wsdl:definitions>also i have to mention that i have changed publisher references inside the code , and i also canot
    supply username and password , so i guess you canot test it. still i not shure if my definitions (namespace est.) inside my code defined correctly.
    hope you can help me with this.
    regards
    yair

  • I am trying to highlight text on multiple pages, but Adobe will not autoscroll via cursor.

    I am trying to highlight text on multiple pages, but when I select the text and bring the cursor to the bottom of the screen Adobe does not advance the document. How do I make it so I can highlight from page to page without having to release the mouse button?
    Also, how do I get adobe to realize that there is a header and footer on each page, but the actual text in the file is in two columes. Is there a way to make this clear and embade it in the document so other programs recognize this too?

    Regarding your first question, change the view to Single Page Continuous.

  • How to read text from PDF and HTML

    I have got solution to read text form .txt file but did'nt get code for PDF and HTML.
    I dont want to convert PDF to txt.
    Please help me ...

    reading from a file is always the same. using the same strategy used for a .txt will allow you to read a .pdf file.
    Offcourse in itself it will be useless becuase pdf files have a special internal structure.
    html files are identical to txt files.
    What are you trying to accomplisch with the files you are reading ?

  • Error 7 occurred when trying to read a spreadsheet file in LabVIEW

    Hi,
    I got the message (in bold) below when I was trying to read a text file type. I also include a snippet of my block diagram.
    Error 7 occurred at Open File+.vipen File
    Possible reason(s):
    LabVIEW:  File not found. The file might have been moved or deleted, or
    the file path might be incorrectly formatted for the operating system.
    For example, use \ as path separators on Windows, : on Mac OS X, and /
    on Linux. Verify that the path is correct using the command prompt or
    file explorer.
    I really appreciate if someone can help me. Thanks.
    Attachments:
    read from spreadsheet.png ‏70 KB

    Hi Ravens Fan,
    Thanks again for your valuable input. I replaced the string manipulation functions with a path control. I think it works coz I can see the waveform data, rms values etc. And then you said if it works, do a Path to String on that...and I'm not exactly sure how to do that. I attached a snippet of the modified vi. you may refer the original vi snippet in my previous email.
    I appreciate it if you could help me again.
    Thanks.
    Attachments:
    read from spreadsheet2.png ‏283 KB

  • Reading text from server socket stream

    I have a basic cd input program i've been trying to figure out the following problem for a while now, the user enters the artist and title etc and then a DOM (XML) file is created in memory this is then sent to the server. The server then echos back the results which is later printed on a html page by reading the replys from the server line by line.
    The server must be run it listens for clients connecting the clients connect and send DOM documents through the following jsp code.
    <%@page import="java.io.*"%>
    <%@page import="java.net.*"%>
    <%@page import="javax.xml.parsers.*"%>
    <%@page import="org.w3c.dom.*"%>
    <%@page import="org.apache.xml.serialize.*"%>
    <%!
       public static final String serverHost = "cdserver";
       public static final int serverPort = 10151;
    %>
    <hr />
    <pre>
    <%
            Socket mySocket = null;          // socket object
            PrintWriter sockOut = null;      // to send data to the socket
            BufferedReader sockIn = null;    // to receive data from the socket
            try {
                //  #1 add line that creates a client socket
                mySocket = new Socket(serverHost, serverPort);
                // #2 add lines that create input and output streams
                //            attached to the socket you just created
                 sockOut = new PrintWriter(mySocket.getOutputStream(), true);
                 sockIn = new BufferedReader(new InputStreamReader(mySocket.getInputStream()));
            } catch (UnknownHostException e) {
                throw e; // This time the JSP can handle the exception, not us
            } catch (IOException e) {
                throw e; // This time the JSP can handle the exception, not us
    String cdTitle, cdArtist, track1Title, track1Time, track1Rating;
    // Retrieve the HTML form field values
    cdTitle = request.getParameter("cdtitle");
    cdArtist = request.getParameter("cdartist");
    track1Title = request.getParameter("track1title");
    track1Time = request.getParameter("track1time");
    track1Rating = request.getParameter("track1rating");
    // Create a new DOM factory, and from that a new DOM builder object
    DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
    DocumentBuilder builder = factory.newDocumentBuilder();
    // Note that we are creating a new (empty) document
    Document document = builder.newDocument();
    // The root element of our document wil be <cd>
    // It gets stored as the child node of the whole document (it is the root)
    Element rootElement = document.createElement("cd");
    document.appendChild(rootElement);
    // Create an element for the CD title called <title>
    Element cdTitleElement = document.createElement("title");
    // Add a text code under the <title> element with the value that
    // the user entered into the title field of the web form (cdTitle)
    cdTitleElement.appendChild(document.createTextNode(cdTitle));
    // Place the <title> element underneath the <cd> element in the tree
    rootElement.appendChild(cdTitleElement);
    // Create an <artist> element with the form data, place underneath <cd>
    Element cdArtistElement = document.createElement("artist");
    cdArtistElement.appendChild(document.createTextNode(cdArtist));
    rootElement.appendChild(cdArtistElement);
    // Create a <tracklist> element and place it underneath <cd> in the tree
    // Note that it has no text node associated with it (it not a leaf node)
    Element trackListElement = document.createElement("tracklist");
    rootElement.appendChild(trackListElement);
    // In this example we only have one track, so it is not necessary to
    // use a loop (in fact it is quite silly)
    // But the code below is included to demonstrate how you could loop
    // through and add a set of different tracks one by one if you
    // needed to (although you would need to have the track data already
    // stored in an array or a java.util.Vector or similar
    int numTracks = 1;
    for (int i=0; i<numTracks; i++) {
      String trackNum = Integer.toString(i+1);
      Element trackElement = document.createElement("track");
      trackElement.setAttribute("id", trackNum);
      trackListElement.appendChild(trackElement);
      // Track title element called <title>, placed underneath <track>
      Element trackTitleElement = document.createElement("title");
      trackTitleElement.appendChild(document.createTextNode(track1Title));
      trackElement.appendChild(trackTitleElement);
      // Track time element called <time>, placed underneath <track>
      Element trackTimeElement = document.createElement("time");
      trackTimeElement.appendChild(document.createTextNode(track1Time));
      trackElement.appendChild(trackTimeElement);
      // Track rating element called <rating>, placed underneath <track>
      Element trackRatingElement = document.createElement("rating");
      trackRatingElement.appendChild(document.createTextNode(track1Rating));
      trackElement.appendChild(trackRatingElement);
    OutputFormat format = new OutputFormat();
    format.setIndenting(true);
    // Create a new XMLSerializer that will be used to write out the XML
    // This time we will serialize it to the socket
    // #3 change this line so that it serializes to the socket,
    // not to the "out" object
    XMLSerializer serializer = new XMLSerializer(writer, format);
    serializer.serialize(document);
            // Print out a message to indicate the end of the data, and
            // flush the stream so all the data gets sent now
            sockOut.println("<!--QUIT-->");
            sockOut.flush();
            BufferedReader stdIn = new BufferedReader(new InputStreamReader(System.in));
            String fromServer;
            String fromUser;
             #4 add a while loop that reads text from the
            server socket input stream, line by line, and prints
            it out to the web page, using out.println(...);
            Note that because the reply from the server will contain
            XML, you will need to call upon the toHTMLString() method
            defined below to escape the < and > symbols so that they
            will display correctly in the web browser.
            Also note that as you receive the reply back from the
            server, you should look out for the special <!--QUIT-->
            string that will indicate when there is no more data
            to receive.
            while ((fromServer = sockIn.readLine()) != null) {
            out.println(sockIn.readLine());
                // If the reply from the server said "QUIT", exit from the
                // while loop by using a break statement.
                if (fromServer.equals("QUIT")) {
                    out.println("Connection closed - good bye ...");
                // Print the text from the server out to the user's screen
                out.println("Reply from Server: " + fromServer);
                // Now read a line of text from the keyboard (typed by user)
                fromUser = stdIn.readLine();
                // If it wasn't null, print it out to the screen, and also
                // print a copy of it out to the socket
                if (fromUser != null) {
                    out.println("Client: " + fromUser);
                    sockOut.println(fromUser);
            // Close all the streams we have open, and then close the socket
            sockOut.close();
            sockIn.close();
            mySocket.close();
    %>
    I'm suppose to modify the commented sections labled with #.
    #1,2 are correct but i have doubts on the 3rd and 4th modification.
    for #3 i changed so i serializes to the socket not to the "out" object:
    from
    XMLSerializer serializer = new XMLSerializer(out, format);
    to
    XMLSerializer serializer = new XMLSerializer(writer, format);
    with "out" it prints out some of the results entered but it just hangs i'm thinking it might be the while loop that i added in #4. If i changed it to serialize the socket XMLSerializer serializer = new XMLSerializer(writer, format); it doesn't print out nothing at all; just a blank screen where it hangs.
    I can post the rest of the code (server thats in java and cdinput.html) but since i want to keep my post short and if required i'll post it later on i also omitted some of the code where it creates the DOM textnodes etc to keep my post short.

    On your previous thread, why did you say the server was using http POST and application/xml content type when it quite obviously isn't, but a direct socket communication that abuses XML comments for message end delimiters?
    The comments imply you need to wait for "<!--QUIT-->" on a line by itself, but your loop is waiting for "QUIT".
    Pete

  • Error while trying to retrieve text for error ORA-12705

    I am getting the message "Error while trying to retrieve text for error ORA-12705" when trying to connect to a remote oracle database on the network.
    I can access this database using:
    sqlplus username/password@database
    from a dos prompt.
    For some reason I can't connect when using PHP (through my local Apache2 server on Windows XP).
    'phpinfo' says oracle in enabled (installed as per: http://www.oracle.com/technology/pub/notes/technote_php_instant.html), so I'm pretty sure the problem isn't with php itself.
    My guess is it's something with Apache, and maybe environment variables or user permissions or instantclient (10).
    All the folders, from instantclient to the Apache server have full permissions set for "Everyone" which I would assume includes this mysterious "nobody" user I've read about.
    As for instantclient, I have placed that "tnsnames.ora" file from the oracle server there, and that hasn't changed much.
    I've tried setting, unsetting, editing (environment variables):
    LD_LIBRARY_PATH
    ORACLE_HOME
    ORACLE_SID
    TNS_ADMIN
    NLS_LANG
    ORA_NLS33
    in both the system environment, and even with PHP's "putenv" function. (Note: and restarting each time I changed a system var.)
    In PHP i'm using:
    $c = oci_connect("username","pasword", "database")
    I've tried OCILogon instead of oci_connect
    For "database" I've tried:
    - using the path to the oracle db: //Oracle1/e/oracle/ora81
    - mapping the path to x: drive and using: x:/oracle/ora81
    - using the name of the database by itself
    - using the name of the database underscored with the database name
    - using "(ADDRESS=(PROTOCOL=TCP)(HOST = host)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=database)))"
    I have tried everything I can find from:
    the Oracle installation page: http://www.oracle.com/technology/pub/notes/technote_php_instant.html
    the Oracle troubleshooting page: http://www.oracle.com/technology/tech/php/htdocs/php_troubleshooting_faq.html#connect
    and these forumswith no results, just the same error.
    I have also spent about 16 hours Googling for help, and nothing.
    Can someone please tell me, what exactly does a user using:
    Windows XP
    Apache 2
    PHP
    intantclient10
    Oracle 8i (on a remote server)
    need to do to connect to Oracle before jumping off a bridge?

    Turns out Oracle was previously installed on this company laptop :(
    I deleted any 'Oracle' mention in the registry with 'regedit' (from the command line) using the Find option. Not sure if it's always a good idea to do that, but I backed up the important stuff first anyway.
    I uninstalled and reinstalled everything using the same guide mentioned above, and then it worked.
    Now I can be friends with Oracle again.
    Would be nice if the "Deinstall" removed the registry entries that caused this issue...

  • Reading Text Files using Oracle PL/SQL and UTL_FILE

    Hi, experts. I tried to read a text file into oracle. Here is what i did:
    1. Create a text file in the directory: C:\temp\New Text Document.txt
    2. Run the following SQL in PL/SQL:
    CREATE or replace DIRECTORY sampledata AS 'C:\temp\';
    grant read, write on directory sampledata to public;
    3. When I run the following code, it caused an error: ora-29280: invalid directory path. I have alread checked the directory path, it is correct. Would someone know what wrong is my code?
    declare
    f utl_file.file_type;
    s varchar2(3000);
    begin
    f := utl_file.fopen('sampledata','New Text Document.txt','R');
    utl_file.get_line(f,s);
    utl_file.fclose(f);
    dbms_output.put_line(s);
    end;
    Thank you

    Try with a filename without spaces:No problem with spaces
    SQL> declare
      2  f utl_file.file_type;
      3  s varchar2(3000);
      4  begin
      5  f := utl_file.fopen('SAMPLEDATA','New Text Document.txt','R');
      6  utl_file.get_line(f,s);
      7  utl_file.fclose(f);
      8  dbms_output.put_line(s);
      9  end;
    10  /
    line1
    PL/SQL procedure successfully completed.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Problem in reading Text file(Unicode)

    Hi
    i am trying to read a tab delimited text file which has Unicode Encoding
    try{
        BufferedReader reader = new BufferedReader(
          new InputStreamReader(
            new FileInputStream(
              "C:/Documents and Settings/divya.parkash/Desktop/Testting.txt"),
              "UTF8"));
       int buf;
       while((buf=reader.read())>-1){
        if (buf!=0)
         str.append((char)buf);
       System.out.println(str.toString());
       catch (Exception e){System.out.println("Res: "+e);}
       }but i am geting two ?? marks before the text
    ??STD_BIN HI 0  100 U10 21010100       66.550       20.000        1.000           1.200        1.200        1.300 0  100 RACKED 0 0
    STD_BIN LO 21010200  100 U10 21010200       66.550       20.000        3.000           1.200        1.200        1.300 0  100 RACKED 0 0
    STD_BIN LO 21010300  100 U10 21010300       66.550       20.000        5.000           1.200        1.200        1.300 0  100 RACKED 0 0
    STD_BIN LO 21010400  100 U10 21010400       66.550       20.000        7.000           1.200        1.200        1.300 0  100 RACKED 0 0
    STD_BIN LO 21010500  100 U10 21010500       66.550       20.000        9.000           1.200        1.200        1.300 0    0 RACKED 0 0
    STD_BIN LO 21010600  100 U10 21010600       66.550       20.000       11.000           1.200        1.200        1.300 0    0 RACKED 0 0So please suggest me the reason and solution

    Hi
    calvino_ind
    this is the output i am getting by keeping buf as int.......
    553365533838468956673789727394899494848985494895049484948494848932323232323254544653534893232323232325048464848489323232323232324946484848999932323232323232494650484893232323232323249465048489323232323232324946514848948932494848982656775696894894813108384689566737897679950494849485048489949484898549489504948494850484893232323232325454465353489323232323232504846484848932323232323232514648484899993232323232323249465048489323232323232324946504848932323232323232494651484894893249484898265677569689489481310838468956673789767995049484948514848994948489854948950494849485148489323232323232545446535348932323232323250484648484893232323232323253464848489999323232323232324946504848932323232323232494650484893232323232323249465148489489324948489826567756968948948131083846895667378976799504948494852484899494848985494895049484948524848932323232323254544653534893232323232325048464848489323232323232325546484848999932323232323232494650484893232323232323249465048489323232323232324946514848948932494848982656775696894894813108384689566737897679950494849485348489949484898549489504948494853484893232323232325454465353489323232323232504846484848932323232323232574648484899993232323232323249465048489323232323232324946504848932323232323232494651484894893232324898265677569689489481310838468956673789767995049484948544848994948489854948950494849485448489323232323232545446535348932323232323250484648484893232323232324949464848489999323232323232324946504848932323232323232494650484893232323232323249465148489489323232489826567756968948948131083846895667378976799504948494855484899494848985494895049484948554848932323232323254544653534893232323232325048464848489323232323232495146484848999932323232323232494650484893232323232323249465048489323232323232324946514848948932323248982656775696894894813108384689566737897679950494849485648489949484898549489504948494856484893232323232325454465353489323232323232504846484848932323232323249534648484899993232323232323249465048489323232323232324946504848932323232323232494651484894893232324898265677569689489481310

Maybe you are looking for

  • 3rd gen. from mac to windows

    My nice newer ipod broke, so my friend gave me an older 3rd generation 40 gb ipod. for an unknown reason, it doesn't work on his mac, so he gave it to me to try on my pc. the ipod itself works fine - it plays all of the music he has on there. but i'd

  • Server Error with JMS

    I have installed..WSAD5.1.2 with 5.0 Test Environment and IBM WebSphere MQ 5.3. I have created a PointToPoint Messaging Client. with a QueueConnectionFactory n Queue JNDI name. I am getting following problems during the server startup... *** Starting

  • Icon for bookmarks toolbar has disappeared. How can I have it permanently displayed again?

    My bookmarks still exist, but the permanent icon to open the window with 1 click in the upper left corner of screen has suddenly disappeared. I was recently making adjustments to my views and toolbars, and may have accidentally switched it off but I

  • How can I resolve trial downloads?

    I joined Adobe Creative Cloud yesterday. I own Creative Suite CS4 which I purchased from Adobe. I was approved for the 29 dollars a month. My downloads went fine except I have the trial products. How can I resolve this? Thanks, Renee

  • Sorting columns dynamically using Presentation Variables

    Hi, I have 4 measures say A,B,C,D , a period dimension and branch name dimension. I would like to select the measure in the prompt and the result should display rank for the selected measure using presentation variables. For eg: If measure-A is selec