Failing to add MacBook to network

I have a DSL-connected LAN using a BEFSR41 router and a WAP11 that have been operating since 2000 and 2001 respectively. No problems and no
complaints. I have Linux boxes and Windows XP boxes connected by Ethernet and N HP laptop with Win7 over 802.11b. WEP encryption. Static
IP addresses.
Recently I've tried to set up a new MacBook with SnowLeopard for a visitor. The OSX setup proceeds until it asks for a wireless network
password - there is none; the windows boxes have never asked for one. I cannot proceed beyond this point.
The "genius" at the local apple store said that their software only asks for a network password if the access point asks for one. So I'm at a loss.
I've tried to introduce a password, but that seems to have no effect.
Anyone?

This is not an encryption problem - The Mac doesn't get to the encryption screen. The request is for a wireless network Password - there is an option for setting one in the WAP11 SNMP setup
screen. None is currently in use.
Message Edited by bostickh on 03-09-2010 07:13 AM
Message Edited by bostickh on 03-09-2010 07:14 AM

Similar Messages

Macbook air fails to remember preferred WIFI network, anyone know a fix, the genius bar did a reinstall without a fix

my macbook air fails to remember preferred WIFI network when it sleeps then reboots, anyone know a fix, the genius bar did a reinstall of the operating system without a fix

my macbook air fails to remember preferred WIFI network when it sleeps then reboots, anyone know a fix, the genius bar did a reinstall of the operating system without a fix

Hi!I was restoring my MacBook pro to its factory setting by erasing the disk and reinstalling OS X lion via internet.but it is failing telling me that my network is very slow while I used the best network in the area.How sld I get an OS X lion to my CP?

Hi!I was restoring my MacBook pro to its factory setting by erasing the disk and reinstalling OS X lion via internet.but it is failing telling me that my network is very slow while I used the best network in my area.How should I get an OS X lion to my CP? Is it possible to get it from another MacBook pro?Or is it possible to recover the erased OS X Lion without or with external disc?
Thank you

Hi OGELTHORPE!
Thank you for your advice but I don't know where i can get it and where to get it. Also I don't know also how to use it.
Could you please keep on helping me?
Regards!

Deployment issue - Login failed for user 'NT AUTHORITY\NETWORK SERVICE'

I am attempting to deploy a site from my development PC to my server. I have no issues running the site on the server using VS2010 Express Web in debug. All page queries are working within the debugger. The connection strings are identical between the PC
and Server, except the host name.
connectionString
="Data
Source=SOCIALSERVER;Initial Catalog=Intake_be;Integrated Security=True"
However, when using the site normally via IIS, the pages containing data access are failing with a permissions problem. The non-data access pages render normally.
Login failed for user 'NT AUTHORITY\NETWORK SERVICE'
Looking at the SQL2005 instance via SQL Management Studio, I see security folder with Logins under the Server. NTA\NS is listed as a user login. But, I also see similar folders under each
of 3 databases. NTA\NS is not listed as a login specific to my target dB.
My site is for internal (intranet) use only. There is no internet access into my IIS. This is my first deployment into production. I think I only need Windows Authentication but I lack the experience to make a good decision. My goal is to allow domain users
to access pages that produce read only data. But, I also need controlled access to pages that can modify data. I used the native winform template for ASP.NET 4, which includes some roles based security.
How do I grant permissions for internal users on the pages that access SQL data? How does that security model work with the native roles based security? i.e.
add
name="AspNetSqlMembershipProvider"type="System.Web.Security.SqlMembershipProvider"connectionStringName="ApplicationServices"...
etc.
Thanks for your time and patience on this Deployment 101 type issue.
Kurt

hi,
You receive either of these error messages specifically when you use integrated security.
To resolve you can use one of below.
Method 1: Programmatically change the security context of the ASP.NET worker process to a user who has the correct SQL Server permissions.
Method 2: Change the default configuration of ASP.NET so that the ASP.NET worker process starts and runs under the context of a user who has the correct permissions in SQL Server.
Method 3: Grant the correct permissions in SQL Server so that the ASPNET account (or NetworkService account, for an application that runs on IIS 6.0) has the appropriate access to the required resources.(Go to the Computer Management >> Local User and
Groups >> Groups >> Right Click and go to properties on IIS_IUSRS >> Add appropriate user.
Thanx, Mark as answered if you are ok ..

Failed to load resource the network connection was lost

I am uploading a 2 gb file into my application using chrome in my MacBook Pro, i keep getting an error (FAILED to load resource: net::ERR_CONNECTION_RESET) when the file is 100% uploaded and the file starts uploading from the beginning (1%... and so on). This issue is not happening when i am doing the file upload using chrome in my windows 7 machine. I Also noticed in the same MacBook if i upload through Safari i get the same error (failed to load resource the network connection was lost). Please let me know what additional information i can provide technically.
Regards,
Charan

common guys..nobody have any solution for this...i have seen many people complaining about large file upload issues in MacBooks which wont happen in windows.

Failed to add node to cluster

Hey, I am currently migrating my cluster.
I removed the server pool master according to the metalink note by doing a failover (stopped the agent on the server pool master)
Deleted the old master (node2) from the server pool.
Executed the cleanup script on node2 and switched it off
Modified the cluster.conf on the remaining node and remove the entries for the old master node2.
Replaced the old server with new hardware -
same name - same ip.
Now I try to add this server to the server pool, but I get a timeout message
OVM-1006 Register Oracle VM Server (node2) Failed: errcode=00001, errmsg=CDS accquire lock /etc/ovs-agent/db/srv.lock timeout. locker process is 8339
Where can I look ?
Christian

Lemeunier wrote:
> environment: sles 10 sp3, oes2, cluster services
>
> problem: reconfiguring oes to add a node to the cluster is causing the
> error *failed to add node to cluster*
>
> history: I installed a 4 node cluster in a HP C7000 blade. We had to
> replace the network switch in the blade center by a virtual connect
> flex-10. This resulted in a loss of network connectivity, so I removed 3
> of 4 nodes from cluster and eDirectory.
> This worked fine, replication and time synchronisation was succesfully
> and all server objects belonging to these 3 servers were deleted.
>
> Now the new switch has been configured and network connection
> reestablished. Reconfiguring eDirectory and other oes2 services
> succeeds, alle server objects are recreated, eDirectory is in sync, but
> reconfiguring cluster services does not succeed.
>
> What do I have to do, to reconfigure cluster service and add nodes to
> the cluster?
>
> Thank you for all hints.
>
> Ursula
>
>
Did you remove the cluster rpms and then reinstall the rpms. I would
recommend following TID 3131978 and see if that helps.

ICMPv6 RA: ndisc_router_discovery() failed to add default route

I have the rv215w and have it setup on our network. I have downloaded and installed the latest firmware prior to putting the router in place. The issue I have though ius I keep getting "ICMPv6 RA: ndisc_router_discovery() failed to add default route" repeatedly in the logs. I have it set to dhcp and not sure what I need to do to resolve this issue.

I have the same issue. In my case, as I posted here, IPv6 only seems to work on the main VLAN, but not on the other(s). I wonder if this "ICMPv6 RA" error is referring to the default route that fails to install on the extra VLAN(s), but of course I am not exactly sure.

OSD Failed to add driver to driver store. Code 0x8022001b

Hello,
I am stuck at applying a Dell driver packages with SCCM 2007.
It's for the Dell Optiplex 7010 & Dell Latitude E6530
82579LM Gigabit Network Connection
I tried the Dell driver package but it kept failing and I ended up in creating a driver package with just the network driver but it also keeps failing.
I don't know what to do anymore because I really need to have a successful network driver installation to continue the deployment. The driver is working fine in WINPE because there I have an IP and Windows7 is installed(PXE deployment) but it fails installing
the driver on Windows7. I have also tried the latest driver from Intel (18.2).
Part of the log file (Driver package download successful):
Download done setting progress bar to 100 OSDDriverClient 17/05/2013 10:33:09 1676 (0x068C)
c:\_smstasksequence\packages\p010010f\01bee370-65be-4cbc-839c-0b6441b97f5d is a directory. Setting directory security OSDDriverClient 17/05/2013 10:33:09 1676 (0x068C)
c:\_smstasksequence\packages\p010010f\01d4b3f7-a1ce-443e-9eb0-51700e8ee227 is a directory. Setting directory security OSDDriverClient 17/05/2013 10:33:09 1676 (0x068C)
c:\_smstasksequence\packages\p010010f\03d386cd-4c3b-44d6-b1c2-b85d6d6cd5ff is a directory. Setting directory security OSDDriverClient 17/05/2013 10:33:09 1676 (0x068C)
c:\_smstasksequence\packages\p010010f\15cff229-cbb6-43a3-add3-e2262505afbb is a directory. Setting directory security OSDDriverClient 17/05/2013 10:33:09 1676 (0x068C)
c:\_smstasksequence\packages\p010010f\18d880d1-075f-4450-8ad3-45aa4be29cec is a directory. Setting directory security OSDDriverClient 17/05/2013 10:33:09 1676 (0x068C)
c:\_smstasksequence\packages\p010010f\1e0c9d57-d6b1-462a-8cf2-b95d1b857380 is a directory. Setting directory security OSDDriverClient 17/05/2013 10:33:09 1676 (0x068C)
c:\_smstasksequence\packages\p010010f\b58a6ac7-d015-4041-9378-654497f30d94 is a directory. Setting directory security OSDDriverClient 17/05/2013 10:33:09 1676 (0x068C)
c:\_smstasksequence\packages\p010010f\de771279-76ba-4609-a634-0b4c4349b04c is a directory. Setting directory security OSDDriverClient 17/05/2013 10:33:09 1676 (0x068C)
c:\_smstasksequence\packages\p010010f\e25063c2-235e-43df-970b-50d7f236cbb3 is a directory. Setting directory security OSDDriverClient 17/05/2013 10:33:09 1676 (0x068C)
c:\_smstasksequence\packages\p010010f\e32fee5c-4b0e-4fd3-8ec2-8b55db9eecdd is a directory. Setting directory security OSDDriverClient 17/05/2013 10:33:09 1676 (0x068C)
c:\_smstasksequence\packages\p010010f\ebacac22-5cfb-42ac-817c-7da025fa14a6 is a directory. Setting directory security OSDDriverClient 17/05/2013 10:33:09 1676 (0x068C)
c:\_smstasksequence\packages\p010010f\f7aed134-7da1-47d8-a2b6-0a51cf618f6b is a directory. Setting directory security OSDDriverClient 17/05/2013 10:33:09 1676 (0x068C)
c:\_smstasksequence\packages\p010010f\ffe0e94f-7a7e-4cad-8293-1c069cfbf782 is a directory. Setting directory security OSDDriverClient 17/05/2013 10:33:09 1676 (0x068C)
Content successfully downloaded at C:\_SMSTaskSequence\Packages\P010010F OSDDriverClient
17/05/2013 10:33:10 1676 (0x068C)
Adding "C:\_SMSTaskSequence\Packages\P010010F\01BEE370-65BE-4CBC-839C-0B6441B97F5D" to Windows driver store. OSDDriverClient 17/05/2013 10:33:10 1676 (0x068C)
Setting %SystemRoot% to "C:\Windows" OSDDriverClient 17/05/2013 10:33:10 1676 (0x068C)
Getting namespace "Microsoft-Windows-PnpCustomizationsNonWinPE" for architecture "x86" OSDDriverClient 17/05/2013 10:33:10 1676 (0x068C)
Added list item with key value '1' OSDDriverClient 17/05/2013 10:33:10 1676 (0x068C)
Writing configuration information to C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml OSDDriverClient 17/05/2013 10:33:10 1676 (0x068C)
Successfully saved configuration information to C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml OSDDriverClient 17/05/2013 10:33:10 1676 (0x068C)
Setting temporary directory to 'C:\_SMSTaskSequence\PkgMgrTemp'. OSDDriverClient 17/05/2013 10:33:10 1676 (0x068C)
Calling Package manager to add drivers to the offline driver store. OSDDriverClient 17/05/2013 10:33:10 1676 (0x068C)
Command line for extension .exe is "%1" %* OSDDriverClient 17/05/2013 10:33:10 1676 (0x068C)
Set command line: "X:\WINDOWS\Pkgmgr\dism.exe" /image:"C:" /windir:"Windows" /apply-unattend:"C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml" /logpath:"C:\_SMSTaskSequence\PkgMgrTemp\dism.log" OSDDriverClient 17/05/2013
10:33:10 1676 (0x068C)
Executing command line: "X:\WINDOWS\Pkgmgr\dism.exe" /image:"C:" /windir:"Windows" /apply-unattend:"C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml" /logpath:"C:\_SMSTaskSequence\PkgMgrTemp\dism.log" OSDDriverClient
17/05/2013 10:33:10 1676 (0x068C)
Process completed with exit code 0 OSDDriverClient 17/05/2013 10:33:12 1676 (0x068C)
Dism successfully added drivers to the offline driver store. OSDDriverClient 17/05/2013 10:33:12 1676 (0x068C)
Successfully added "C:\_SMSTaskSequence\Packages\P010010F\01BEE370-65BE-4CBC-839C-0B6441B97F5D" to the Windows driver store. OSDDriverClient 17/05/2013 10:33:12 1676 (0x068C)
Adding "C:\_SMSTaskSequence\Packages\P010010F\01D4B3F7-A1CE-443E-9EB0-51700E8EE227" to Windows driver store. OSDDriverClient 17/05/2013 10:33:12 1676 (0x068C)
Setting %SystemRoot% to "C:\Windows" OSDDriverClient 17/05/2013 10:33:13 1676 (0x068C)
Getting namespace "Microsoft-Windows-PnpCustomizationsNonWinPE" for architecture "x86" OSDDriverClient 17/05/2013 10:33:13 1676 (0x068C)
Added list item with key value '1' OSDDriverClient 17/05/2013 10:33:13 1676 (0x068C)
Writing configuration information to C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml OSDDriverClient 17/05/2013 10:33:13 1676 (0x068C)
Successfully saved configuration information to C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml OSDDriverClient 17/05/2013 10:33:13 1676 (0x068C)
Setting temporary directory to 'C:\_SMSTaskSequence\PkgMgrTemp'. OSDDriverClient 17/05/2013 10:33:13 1676 (0x068C)
Calling Package manager to add drivers to the offline driver store. OSDDriverClient 17/05/2013 10:33:13 1676 (0x068C)
Command line for extension .exe is "%1" %* OSDDriverClient 17/05/2013 10:33:13 1676 (0x068C)
Set command line: "X:\WINDOWS\Pkgmgr\dism.exe" /image:"C:" /windir:"Windows" /apply-unattend:"C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml" /logpath:"C:\_SMSTaskSequence\PkgMgrTemp\dism.log" OSDDriverClient 17/05/2013
10:33:13 1676 (0x068C)
Executing command line: "X:\WINDOWS\Pkgmgr\dism.exe" /image:"C:" /windir:"Windows" /apply-unattend:"C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml" /logpath:"C:\_SMSTaskSequence\PkgMgrTemp\dism.log" OSDDriverClient
17/05/2013 10:33:13 1676 (0x068C)
Process completed with exit code 2149711899 OSDDriverClient 17/05/2013 10:33:16 1676 (0x068C)
uExitCode == 0, HRESULT=8022001b (e:\nts_sms_fre\sms\client\osdeployment\osddriverclient\sysprepdriverinstaller.cpp,558) OSDDriverClient 17/05/2013 10:33:16 1676 (0x068C)
Dism failed with return code -2145255397 OSDDriverClient 17/05/2013 10:33:16 1676 (0x068C)
AddPnPDriverToStore( pszSource, sTargetSystemDrive, sTargetSystemRoot, wProcessorArchitecture), HRESULT=8022001b (e:\nts_sms_fre\sms\client\osdeployment\osddriverclient\sysprepdriverinstaller.cpp,668) OSDDriverClient 17/05/2013 10:33:16 1676 (0x068C)
Failed to add driver to driver store. Code 0x8022001b OSDDriverClient 17/05/2013 10:33:16 1676 (0x068C)
InstallDriver( iInstallParams->sContentId, iInstallParams->sSource, iInstallParams->pBootCriticalInfo ), HRESULT=8022001b (e:\nts_sms_fre\sms\client\osdeployment\osddriverclient\driverinstaller.cpp,557) OSDDriverClient 17/05/2013 10:33:16 1676 (0x068C)
Entering ReleaseSource() for C:\_SMSTaskSequence\Packages\P010010F OSDDriverClient 17/05/2013 10:33:16 1676 (0x068C)
reference count 1 for the source C:\_SMSTaskSequence\Packages\P010010F before releasing OSDDriverClient 17/05/2013 10:33:16 1676 (0x068C)
Delete source directory C:\_SMSTaskSequence\Packages\P010010F OSDDriverClient 17/05/2013 10:33:16 1676 (0x068C)
Released the resolved source C:\_SMSTaskSequence\Packages\P010010F OSDDriverClient 17/05/2013 10:33:16 1676 (0x068C)
pDriverInstaller->InstallDriverPackage( sPackageId, pBootCriticalInfo ), HRESULT=8022001b (e:\nts_sms_fre\sms\client\osdeployment\osddriverclient\osddriverclient.cpp,409) OSDDriverClient 17/05/2013 10:33:16 1676 (0x068C)
Failed to provision driver. Code 0x8022001b OSDDriverClient 17/05/2013 10:33:16 1676 (0x068C)
Exiting with return code 0x8022001B OSDDriverClient 17/05/2013 10:33:16 1676 (0x068C)
Process completed with exit code 2149711899 TSManager 17/05/2013 10:33:16 1644 (0x066C)
!--------------------------------------------------------------------------------------------! TSManager 17/05/2013 10:33:16 1644 (0x066C)
Failed to run the action: Apply Driver Package.
Unknown error (Error: 8022001B; Source: Unknown) TSManager 17/05/2013 10:33:16 1644 (0x066C)
Sending status message . . . TSManager 17/05/2013 10:33:16 1644 (0x066C)
Any suggestions on this issue?

The failing part 2013-05-21 15:47:44, Info 2013-05-21 15:47:44, Info 2013-05-21 15:47:44, Info 2013-05-21 15:47:44, Info 2013-05-21 15:47:44, Info 2013-05-21 15:47:44, Info 2013-05-21 15:47:44, Info 2013-05-21 15:47:44, Info 2013-05-21 15:47:44, Info 2013-05-21 15:47:44, Info 2013-05-21 15:47:44, Info 2013-05-21 15:47:44, Error 2013-05-21 15:47:44, Error [gle=0x80004005]
2013-05-21 15:47:44, Warning 2013-05-21 15:47:44, Error 2013-05-21 15:47:44, Warning 2013-05-21 15:47:44, Error 2013-05-21 15:47:44, Error 2013-05-21 15:47:44, Error 2013-05-21 15:47:44, Error 2013-05-21 15:47:44, Error 2013-05-21 15:47:44, Error 2013-05-21 15:47:44, Info 2013-05-21 15:47:44, Info 2013-05-21 15:47:44, Info 2013-05-21 15:47:44, Info 2013-05-21 15:47:44, Info 2013-05-21 15:47:44, Info 2013-05-21 15:47:44, Info 2013-05-21 15:47:44, Info 2013-05-21 15:47:44, Info 2013-05-21 15:47:44, Info 2013-05-21 15:47:44, Info 2013-05-21 15:47:44, Info 2013-05-21 15:47:44, Info 2013-05-21 15:47:44, Info 2013-05-21 15:47:44, Info 2013-05-21 15:47:44, Info 2013-05-21 15:47:44, Info 2013-05-21 15:47:44, Info I have still the of the dism.log file
DISM DISM.EXE: Succesfully registered commands for the provider: Edition Manager.
DISM DISM Provider Store: PID=808 Getting Provider DISM Unattend Manager - CDISMProviderStore::GetProvider
DISM DISM Provider Store: PID=808 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=808 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
DISM DISM Provider Store: PID=808 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
DISM DISM Package Manager: PID=808 <servicing> node not found. Nothing to do. - CPackageManagerUnattendHandler::Apply
DISM DISM Provider Store: PID=808 Getting Provider SmiManager - CDISMProviderStore::GetProvider
DISM DISM Provider Store: PID=808 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
CSI 00000001 Shim considered [l:252{126}]"\??\C:\Windows\Servicing\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe" : got STATUS_OBJECT_PATH_NOT_FOUND
CSI 00000002 Shim considered [l:246{123}]"\??\C:\Windows\WinSxS\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe" : got STATUS_SUCCESS
DISM DISM Smi Provider: PID=808 SMI provider selected "offlineServicing" servicing pass. - CSmiWrapper::ApplySettings
CSI 00000001 (F) 8022001b [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=27 (0x001b)] #28# from CChildContextStore::CreateListSetting(path = /settings/DriverPaths, settingName = PathAndCredentials[@keyValue="1"], enumerator = @0x346f08, settingType = 16 (0x00000010))[gle=0x80004005]
CSI 00000002 (F) 8022001b [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=27 (0x001b)] #27# from CWcmStateNodeCore::GetOrCreateChildOneLevel(fCreate = TRUE, fTopLevel = FALSE, fPredefinedList = FALSE, node name = [@keyValue="1"], name in handler = 0, childType = 16 (0x00000010), childMetaData = @0x335c20, childNode = NULL)
DISM DISM Smi Provider: PID=808 The following problems were encountered while deserializing settings. List of issues follows: - CSmiWrapper::ApplySettings
DISM DISM Smi Provider: PID=808 [Setting Override Error] hr=0x8022001b / Source=[Name: Microsoft-Windows-PnpCustomizationsNonWinPE, Language: neutral, ProcessorArchitecture: x86, PublicKeyToken: 31bf3856ad364e35, VersionScope: nonSxS, /settings/DriverPaths/PathAndCredentials/[@keyValue="1"]] / Description=[This list setting is marked for add, but a list item with the same key value already exists.]. - CSmiWrapper::DisplayDeserializationResults
DISM DISM Smi Provider: PID=808 End of list. - CSmiWrapper::ApplySettings
DISM DISM Smi Provider: PID=808 Error found in unattend settings - CSmiWrapper::ApplySettings(hr:0x8022001b)
DISM DISM Smi Provider: PID=808 d:\w7rtm\base\ntsetup\opktools\dism\providers\smiprovider\dll\smimanager.cpp:166 - CSmiManager::Apply(hr:0x8022001b)
DISM DISM Unattend Manager: PID=808 d:\w7rtm\base\ntsetup\opktools\dism\providers\unattendprovider\dll\unattendmanager.cpp:400 - CUnattendManager::Apply(hr:0x8022001b)
DISM DISM Unattend Manager: PID=808 d:\w7rtm\base\ntsetup\opktools\dism\providers\unattendprovider\dll\unattendmanager.cpp:654 - CUnattendManager::InternalExecuteCmdLine(hr:0x8022001b)
DISM DISM Unattend Manager: PID=808 d:\w7rtm\base\ntsetup\opktools\dism\providers\unattendprovider\dll\unattendmanager.cpp:603 - CUnattendManager::ExecuteCmdLine(hr:0x8022001b)
DISM DISM.EXE: DISM Unattend Manager processed the command line but failed. HRESULT=8022001B
DISM DISM Image Session: PID=808 Disconnecting the provider store - CDISMImageSession::Final_OnDisconnect
DISM DISM Provider Store: PID=808 Finalizing the servicing provider(DISM Package Manager) - CDISMProviderStore::Internal_DisconnectProvider
CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}C:/Windows/System32/config/SOFTWARE
CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}C:/Windows/System32/config/SOFTWARE, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}C:/Windows/System32/config/SYSTEM
CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}C:/Windows/System32/config/SYSTEM, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}C:/Windows/System32/config/SECURITY
CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}C:/Windows/System32/config/SECURITY, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}C:/Windows/System32/config/SAM
CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}C:/Windows/System32/config/SAM, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}C:/Windows/System32/config/COMPONENTS
CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}C:/Windows/System32/config/COMPONENTS, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}C:/Windows/System32/config/DEFAULT
CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}C:/Windows/System32/config/DEFAULT, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}C:/Users/default/ntuser.dat
CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}C:/Users/default/ntuser.dat, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}C:/Windows/system32/smi/store/Machine/schema.dat
DISM DISM Package Manager: PID=808 Finalizing CBS core. - CDISMPackageManager::Finalize
same issue. It occurs with every driver package. Dism always fails to inject the drivers. What can I do about this?

Slow Macbook on network where other computers are fine

My daughter's Macbook is painfully slow online in the house, and I have no idea why. An iMac on the same network, also 10.5.8 and with same network configuration, runs much faster. The Macbook seems to "think" for a few seconds before it moves to a new web page. I did an archive and install earlier today, and the issue is unchanged. And I created a temporary user account...same problem.
Thoughts?

i tried all the following, no luck
Please try each of the steps that follow, in order, until resolved:
STEP 1
Create a New User Account
System Preferences > Accounts
Click "+" to add a new account
Log off, and then, log back on with the new user account.
Try connecting to a Wi-Fi network with your Mac's AirPort.
STEP 2
Delete Preferred Network(s)
System Preferences > Network > Select AirPort > Advanced > AirPort tab
Under Preferred Network, use the minus button to delete the network(s) you regularly use from the list
Delete AirPort Keychain Entries (Note: only applies if you connect to AirPort/Time Capsule routers)
Launch the "Keychain Access" application located in /Applications/Utilities
Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
Restart, or log out then back in.
Add Preferred Network(s)
System Preferences > Network > Select AirPort > Advanced > AirPort tab
Under Preferred Network, click on the plus button to add any preferred network(s).
Restart or log out then back in.
STEP 3 Disable the Mac OS X Firewall
System Preferences > Security > Firewall
Click the "Stop" button.
STEP 4 Move System Configuration Files(Note: You will have to reestablish your network connections settings.)
Go to Macintosh HD/Library/Preferences
Move the SystemConfiguration folder and com.apple.networkConfig.plist file to the desktop.
Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder & .plist file back to their original location.)

Add-on Status is Failed, but Add-on is connected

Good Day!
Hi Experts,
I had created an installer for my Add-on for the client. This is a project from SAP B1 Studio.
SAP B1 version is 9.0 PL11.
1. The add-on is running ok in Debug Mode.
2. I've successfully created an ARD File.
3. Successfully installed ARD File.
4. On Add-on Manager, when I tried to click Start, the add-on says Incorrect Connection String for Add-on. Even if the Status is Failed, the Add-on still executes. It still displays the custom form, the events, CFL etc.
I've used the SAPBouicom.Dll in my debug folder, and I ensured the latest SAP B1 Studio and DI API is installed (PL11). I even removed the old files and reinstalled but the same result appears.
Your help is greatly appreciated in this matter.

i had already a Debug Code in my Environment.
Dim sConnectionString As String
SboGuiApi = New SAPbouiCOM.SboGuiApi
sConnectionString = Environment.GetCommandLineArgs.GetValue(1).ToString
                Try
                    SboGuiApi.Connect(sConnectionString)
                    ' Causes an Error Here but if I don't terminate the Add-on here, the Add-on will still run
                Catch ex As Exception
                         'System.Windows.Forms.MessageBox.Show("No SAP Business One Application was found")
                         'End
                    Try
SBO_Application = SboGuiApi.GetApplication()

The processing of Group Policy failed because of lack of network connectivity to a domain controller

We are setting up a new AD environment with one AD/DC running DNS services, and a secondary DNS server configured with secondary zone. The problem is that none of the machines in the the domain are getting GPO.
When I run a gpupdate /force from a machine, I get the following output:
"Updating Policy...
User Policy update has completed successfully.
Computer policy could not be updated successfully. The following errors were enc
ountered:
The processing of Group Policy failed because of lack of network connectivity to
a domain controller. This may be a transient condition. A success message would
be generated once the machine gets connected to the domain controller and Group
Policy has succesfully processed. If you do not see a success message for sever
al hours, then contact your administrator.
To diagnose the failure, review the event log or run GPRESULT /H GPReport.html f
rom the command line to access information about Group Policy results."
While the system event log outputs the following:
"The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain controller and Group Policy
has succesfully processed. If you do not see a success message for several hours, then contact your administrator."
All the machines that were joined to the domain are able to resolve in forward and reverse lookups, ping the DC and ping each other so I dont understand how the error can be resolved.
Here are few things I have tried:
1. I came across this KB which checked ok for me: http://support.microsoft.com/kb/241515
2. Made a copy of the default GPO, applied to a OU with one machine, and made sure to remove any GPO links from above
3. Enabled the following two local Group policies on a test member:
GP slow link detection
Startup policy processing wait time
4. Modified firewall to allow everything on both member and DC
5. Verified DSN logs, SRV records, access to sysvol ( added authenticated users to sysvol)
I have yet to figure out the reason for this issue. Has anyone seen anything like this before?

1. I checked the NIC, it only has one IP. and I followed your article. I set the primary DNS to its own IP and the secondary DNS to the loopback ip
2. This is a new DC and DNS server. I dont have old records yet. I also check the DNS event logs. No errors
3. I made sure the member server is pointing only to the only DC/DNS server
4. Here is the output from the dcdiag.... everything passed except, the Netlogons part. I'm not sure what means or how to fix it yet:
Starting test: NetLogons
* Warning BUILTIN\Administrators did not have the "Access this
computer
"* from network" right.
[hostname] An net use or LsaPolicy operation failed with error
1, Incorrect function..
......................... hostname failed test NetLogons
Complete output:
> hostname
Server: hostname.domain.local
Address: X.X.X.95
> ^C
C:\Windows\system32>
C:\Windows\system32>nslookup
> set type=all
>
>
>
> _ldap._tcp.dc._msdcs.domainname
_ldap._tcp.dc._msdcs.domain.local SRV service location:
priority = 0
weight = 100
port = 389
svr hostname = hostname.domain.local
hostname.domain.local internet address = X.X.X.95
> ^C
C:\Windows\system32>cd ..
C:\Windows>cd SYSVOL
C:\Windows\SYSVOL>cd sysvol
C:\Windows\SYSVOL\sysvol>dir
Volume in drive C has no label.
Volume Serial Number is F624-CDB2
Directory of C:\Windows\SYSVOL\sysvol
10/29/2014 08:25 PM <DIR> .
10/29/2014 08:25 PM <DIR> ..
10/29/2014 08:25 PM <JUNCTION> domain.local [C:\Windows\SYSVOL\domain]
0 File(s) 0 bytes
3 Dir(s) 63,971,037,184 bytes free
C:\Windows\SYSVOL\sysvol>dcdiag
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = hostname
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\hostname
Starting test: Connectivity
......................... hostname passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\hostname
Starting test: Advertising
......................... hostname passed test Advertising
Starting test: FrsEvent
......................... hostname passed test FrsEvent
Starting test: DFSREvent
......................... hostname passed test DFSREvent
Starting test: SysVolCheck
......................... hostname passed test SysVolCheck
Starting test: KccEvent
......................... hostname passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... hostname passed test
KnowsOfRoleHolders
Starting test: MachineAccount
......................... hostname passed test MachineAccount
Starting test: NCSecDesc
......................... hostname passed test NCSecDesc
Starting test: NetLogons
* Warning BUILTIN\Administrators did not have the "Access this
computer
"* from network" right.
[hostname] An net use or LsaPolicy operation failed with error
1, Incorrect function..
......................... hostname failed test NetLogons
Starting test: ObjectsReplicated
......................... hostname passed test
ObjectsReplicated
Starting test: Replications
......................... hostname passed test Replications
Starting test: RidManager
......................... hostname passed test RidManager
Starting test: Services
......................... hostname passed test Services
Starting test: SystemLog
A warning event occurred. EventID: 0x000003F6
Time Generated: 03/04/2015 18:23:06
Event String:
Name resolution for the name ctldl.windowsupdate.com timed out after
none of the configured DNS servers responded.
......................... hostname passed test SystemLog
Starting test: VerifyReferences
......................... hostname passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : emcdsm
Starting test: CheckSDRefDom
......................... emcdsm passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... emcdsm passed test CrossRefValidation
Running enterprise tests on : domain.local
Starting test: LocatorCheck
......................... domain.local passed test LocatorCheck
Starting test: Intersite
......................... domain.local passed test Intersite
C:\Windows\SYSVOL\sysvol>

My imac (osx 10.6.8), apple mail(4.5) has begun to act very odd. It quits out and on occasion I open an email to face "plugin is missing" or I have a spinning wheel and the email won't open. New to do list fails to add to the list. Can anyone help?

Hi all,
My imac (osx 10.6.8), apple mail(4.5) has begun to act very odd. It quits out and on occasion I open an email to face "plugin is missing" or I have a spinning wheel and the email won't open. New to do list fails to add to the list. Can anyone help?

Hi all,
My imac (osx 10.6.8), apple mail(4.5) has begun to act very odd. It quits out and on occasion I open an email to face "plugin is missing" or I have a spinning wheel and the email won't open. New to do list fails to add to the list. Can anyone help?

Trying to replace a failed hard drive Macbook Pro 17 2011

So, my Hitachi 750 GB HD just failed on my Macbook Pro 17" (2011). I bought a new Travelstar 1 TB 7200 RPM HD and have installed it without an issue (very simple to do). BUT, I do not have any install disks to use to install the OXs. This laptop originally had Mountain Lion installed, which I upgraded to Mavericks via iTunes. How can I install the OXs and then proceed to formatting the new HD? Am I going to have to call Apple to see if I can get install disks for Mountain Lion? Can I somehow create my own install disks from a Mavericks download? I'm pretty new to Macs, being a PC person, so not sure how to proceed at this point. Thanks for any help you can give me!
Patty

Okay. So I was able to install, and format the new internal HD. Was able to install Lion then Mavericks. Next, is to try to retrieve my data from my failing old HD. I bought an enclosure (sled), and have my HD hooked up to my laptop, and it finally showed up in Finder. So. Now. What is next? I am seeing a screen that shows these folders: Applications (translate for the PC me = Programs), Library (I am assuming?? these are my various files such as docs, photos, music, etc.) System, opt, and Users. Should I just try to drag and drop some/all of the folders onto my desktop, then open up the folders and do something with the contents? Sorry to sound so vague and frankly, rather dumb-sounding, but the nomenclature with a Mac is a bit different than with a PC, and Finder is a little different looking to me than Windows Explorer. I am relieved to see that I was even able to get this failing drive to show up in the first place, so I feel a little like I could be on borrowed time with it. I think it may just be bad sectors, since I don't hear any clicking or other mechanical issues with the drive as it spins. But, any further help with retrieving the data would be VERY much appreciated!!

How to add a new network interface adapter?

Hello,
I followed this tutorial (http://www.oracle.com/technology/obe/ovm/ovmel5pvmdb11gr1/ovmel5pvmdb11gr1.htm) to set up a paravirtualized Oracle Enterprise Linux Version 5 VM on Oracle VM Server. It works fine, however I wish to add another network interface adapter (or NIC) to it, however when I try to import into Oracle VM Manager I get the following error:
"OVM-5004 Invalid virtual machine config file. -"
I don't know where the vm config file is so I can't fix that (I did a search for vm.cfg but couldn't find it). I figured since I could access the machine OK I wouldn't worry about importing it into VM Manager, so my question is, is there a way to set up the Network Interface Adapter through the command line on the VM Server (similar to how it was setup)? Or should I try and fix the "invalid virtual machine config file" error so I can import it into VM Manager and then add the extra Network Interface Adapter?
Thanks in advance,
Michael.

user10862036 wrote:
I don't know where the vm config file is so I can't fix that (I did a search for vm.cfg but couldn't find it). The vm.cfg file would be found in /OVS/running_pool/<vm_name>/ -- the default vm.cfg that ships with the template should successfully import into Oracle VM Manager. Once you have the image imported, you can use Oracle VM Manager to add an additional NIC to the VM.

Failed to add the resource due to error in the resource

Mi problema es el siguiente:
Tenemos el ORA 10G Release 2 (10.1.2.0.2), versión LITE, y a la hora de hacer ciertas operaciones se produce el siguiente error:
avax.transaction.SystemException: Failed to add the resource due to error in the resource
at com.evermind.server.ApplicationServerTransaction.enlistResource(ApplicationServerTransaction.java:260)
at com.evermind.server.ApplicationServerTransaction.enlistResource(ApplicationServerTransaction.java:183)
at com.hphis.corp.Transaccion.conectaBD(Transaccion.java:255)
at com.hphis.corp.Transaccion.iniciarTransaccion(Transaccion.java:141)
at com.hphis.edoctor.anotaciones.DocAnotacionBean.createNote(DocAnotacionBean.java:211)
at edoctor.anotaciones._crearAnotacion._jspService(_crearAnotacion.java:211)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:350)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at com.hphis.corp.filters.logueo.LogueoFilter.doFilter(LogueoFilter.java:66)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
at com.hphis.corp.filters.gzip.GZipFilter.doFilter(GZipFilter.java:56)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:659)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
El contenido de mi data-sources.xml es el siguiente:
<?xml version="1.0"?>
<!DOCTYPE data-sources PUBLIC "Orion data-sources" "http://www.orionserver.com/dtds/data-sources.dtd">
<data-sources>
     <data-source
class="com.evermind.sql.DriverManagerDataSource"
name="ibasededatos"
location="jdbc/ibasededatos"
xa-location="jdbc/xa/ibasededatosXA"
          ejb-location="jdbc/ibasededatos"
pooled-location="jdbc/ibasededatos"
          connection-driver="com.informix.jdbc.IfxDriver"
username="informix"
password="informix"
url=""
max-connections="100"
min-connections="2"
inactivity-timeout="600"
schema="database-schemas/informix.xml"
     </data-source>
</data-sources>
No pongo la url por motivos justificados, sale la IP de la BD a la que conecto.
No consigo saber por qué, pero con un servidor Orion no pasa.

Mi problema es el siguiente:
Tenemos el ORA 10G Release 2 (10.1.2.0.2), versión LITE, y a la hora de hacer ciertas operaciones se produce el siguiente error:
avax.transaction.SystemException: Failed to add the resource due to error in the resource
at com.evermind.server.ApplicationServerTransaction.enlistResource(ApplicationServerTransaction.java:260)
at com.evermind.server.ApplicationServerTransaction.enlistResource(ApplicationServerTransaction.java:183)
at com.hphis.corp.Transaccion.conectaBD(Transaccion.java:255)
at com.hphis.corp.Transaccion.iniciarTransaccion(Transaccion.java:141)
at com.hphis.edoctor.anotaciones.DocAnotacionBean.createNote(DocAnotacionBean.java:211)
at edoctor.anotaciones._crearAnotacion._jspService(_crearAnotacion.java:211)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:350)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at com.hphis.corp.filters.logueo.LogueoFilter.doFilter(LogueoFilter.java:66)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
at com.hphis.corp.filters.gzip.GZipFilter.doFilter(GZipFilter.java:56)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:659)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
El contenido de mi data-sources.xml es el siguiente:
<?xml version="1.0"?>
<!DOCTYPE data-sources PUBLIC "Orion data-sources" "http://www.orionserver.com/dtds/data-sources.dtd">
<data-sources>
     <data-source
class="com.evermind.sql.DriverManagerDataSource"
name="ibasededatos"
location="jdbc/ibasededatos"
xa-location="jdbc/xa/ibasededatosXA"
          ejb-location="jdbc/ibasededatos"
pooled-location="jdbc/ibasededatos"
          connection-driver="com.informix.jdbc.IfxDriver"
username="informix"
password="informix"
url=""
max-connections="100"
min-connections="2"
inactivity-timeout="600"
schema="database-schemas/informix.xml"
     </data-source>
</data-sources>
No pongo la url por motivos justificados, sale la IP de la BD a la que conecto.
No consigo saber por qué, pero con un servidor Orion no pasa.

Failing to add MacBook to network

Similar Messages

Maybe you are looking for