Failure capture stays on next screen

I'm building an interactive software quiz. If the user fails
to enter the correct data into a text entry box a failed caption is
displayed for a few seconds "sorry, try again."
After the third attempt, if the user still gets it wrong, the
program is supposed to jump to a kick-out page that tells the user
that they failed the quiz and need to re-take the lesson.
The problem is, on the third attempt, the user jumps to the
kick-out page but the failure caption is still displayed on this
kick-out page until the time runs out on it (2-3 secs).
The client wants the caption to stay on the preceeding page
and not show up on the kickout page, even for a second.
Is this a bug or can I do something different to make it work
properly?
Thanks

The most likely scenario here is that the option to 'Pause
for Success/Failure Captions' check box has not been checked.
Tim

Similar Messages

I keep getting a box asking me to upgrade the system. The box has a click for more info, but when I click it will not open. The overall box stays on the screen only a few seconds. I cannot be sure that this is not a scam.

There are no details about which version the update applies to.
I cannot be sure that this is not a scam so I have not uploaded it. The fact that the box stays on the screen for only a few seconds, before the regular Firefox screen opens, suggests that the box wants the user to make a quick, uniformed, decision, and to press "Next" rather than find out about the changes.

Did you ever install a Firefox 4 beta (or RC) version in the past?
It is possible that you are still on the beta update channel if you ever installed a Firefox 4 beta version or a release candidate. 
You can check that by looking at the pref app.update.channel on the about:config page. 
If the value of that pref is beta then it is better to download and install the latest Firefox 4.0.x release. 
You can find the latest Firefox 4.0.x on this site:
* http://www.mozilla.com/en-US/firefox/all.html

Printing fax page 1 stays on the screen

Printing fax page 1 message stays on the printer - even if I shut it off or unplug it and turn it back on. When shut off and turned back on, it prints the same page 1 again.
I can't figure out how to erase this message.
Carol

Hi @Precision1 ,
I see that you are experiencing issues with the fax message staying on the printer, even when you disconnect the power it will stay on the screen and print out the fax again. I would like to help you out today.
Try a hard reset, if this is different from what you have already tried.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
I will send you private message with some more steps to try
In the forum beside your handle name just click on the envelope to view it.
Then I would update the firmware on the printer. HP LaserJet Pro MFP M127fn Drivers.
Select your operating system, click next, click the link for firmware.
How is the printer connected? (USB/Ethernet)
Please let me know if you require any additional assistance.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

I restored my ipod before connecting it to the computar and now it just stays at the screen like when its the silver apple is there a way to fix this?

I restored my ipod before connecting it to the computar and now it just stays at the screen like when its the silver apple is there a way to fix this?

- Have you tried resetting the Ipod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.-
- Next connect it to your computer. If iTunes sees the iPod restore the iPod, First restore from backup and if problem persists restore to factory defaults/new iPod.
- If iTunes does not see the iPod first try placing the iPod in recovery mode. If not seen try placing it in DFU mode:
Recovery mode:
iPhone and iPod touch: Unable to update or restore
DFU mode:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

HT1695 On the setup after a factory reset I get to choose my network. I have three full bars and my wifi is checked. It just stays on that screen and won't go any further

I'm trying to setup my ipad after a factory reset. I get to the screen that says choose network. I choose mine and it puts a checkmate next to it. I have all the bars for wifi and that's all that happens. It just stays on that screen. It won't highlight the next button so I can go on. Any help?

Turn off router for 30 seconds and on again; try connecting again when router is ready.

Cannot log in to Nationwide internet banking in Firefox. I get the front page but Login says internet banking is not working. Next screen says it's ok and sends you back to the first screen, which says it isn't. Works throughInternet explorer

Question
Cannot log in to Nationwide internet banking. I get the front page but Login says internet banking is not working. Next screen says it's ok and sends you back to the first screen, which says it isn't. Works throughInternet explorer

That issue can be caused by corrupted cookies.
*https://support.mozilla.org/kb/Cannot+log+in+to+websites
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"

Is there a way for Drag & Drop answers to populate next screen?

I'm working on a project in Captivate 7 where the user is filling out a table (1 row, 3 columns, 9 possible correct answer combinations) using drag and drop words. The user will ultimately build a table with 3 rows and 3 columns, doing 1 row at a time per screen. I would like the user's correct answers to the rows they have already completed correctly to appear on each successive screen (but not for the entire rest of the project, just the following few screens). I have tried to get this working every which way and I can't seem to make it happen.
The closest I have gotten is to use the "accept" panel to set each correct answer to assign its own value to a variable placed in a text caption on the following slide. However, that seems to trigger an auto-submit (I have the global "auto submit correct answers" turned off) so that the first item the user places correctly in the table advances them to the next slide even though there are still 2 more cells of the table to complete.

Here's a shot of the intiial screen:
As you can see, there are multiple correct combinations of answers. (Users will be children, so it does need to be very user-friendly with the ability to undo/reset answers.) In the word bank are 3 correct variable items and 6 correct values (I have it set so that only correct combinations of variables and values will be accepted as correct, so "lemonade" will never be a correct value for "age of seller", for example).
Here's the next screen which I have made fill from selections from previous via an "on accept" advanced action (show a text caption unique to that answer and location):
The problem with this advanced action solution is that if the user makes a selection in the first screen, then gets it partially wrong or for some other reason resets the words back to the bank, those text captions on the next screen still have been shown and will stick around, thus:
Every solution I've attempted has had some fatal flaw in the end. What I really need to happen is a conditional action that basically says "If the contents of drop target X = drag source Y, then set VarA [on screen 2] to $text$." For example, "If the contents of drop target [Variables Cell] = Text Caption timeofday, then set $Var1$ to "Time of Day".
I am about to throw in the towel here and just have students type in words to text boxes (these are mainly disadvantaged students I work with, so their typing skills are not great) just to utilize being able to make a user-generated variable out of text box entries.

How to populate the next screen based on the previous screen table control

Hi Experts,
Is this possible to generate the next screen values based on the table control values in previous screen.
My Requirement is
In my First screen i m having 5-7 regional offices in table control and also amount field for each regional offices.(amount field is editable)
User has to enter amount field for Regional office..based on the amount field i need to process the next screen. For Ex if user is entering amount for 3 regional offices out of 7 regional offices then i need to get the screen for the 3 regional offices..
Pls suggest me how to do this..
Regards,
Zakir

Hi Zakir,
Do you have any button for calling the second screen after entering amount in the first table control screen or you have to call the screen on pressing enter on the table control?
You will have to handle it in the PAI of the table control loop.Get data entered in the table control in your internal table of table control.You can prepare the data passed to the next screen from this internal table. Fill the second screen elements and Use CALL SCREEN XXX. XXX is your second screen no.
Thanks,
Pawan

My new macbook pro has gone black on me three days in a row. is this a chronic problem? only way to get it back is a hard reset or let the battery die and then plug in the charger. brightness is up and power stays on while screen is black.

My new macbook pro has gone black on me three days in a row. is this a chronic problem?
The only way to get it back is a hard reset or let the battery die and then plug in the charger. The brightness is up and the power stays on while screen is black.
This is the second macbook pro i have owned in the past two weeks. I am ready to return it for good if this is a chronic issue. Please help if you have had this same issue.

Try a SMC reset:
http://support.apple.com/kb/HT3964
Try a NVRAM/PRAM reset:
http://support.apple.com/kb/HT1379
If no joy, take it back, and take full advantage of your warranty!
You also may want to let Apple know about this as well:
http://www.apple.com/feedback//
I wish you the best

I used utilities to source my 10.6 snow leopard install disc to my main hardrive, and now when I turn on my computer the apple with the spinning wheel stays on the screen and stuck like that. How do I fix it Help please. I already tried all the commands

I used utilities to source my 10.6 snow leopard install disc to my main hardrive, and now when I turn on my computer the apple with the spinning wheel stays on the screen and stuck like that. How do I fix it Help please. I already tried all the commands such as Command R, Holding down the Option key, C and holding down shift at the start up but nothing happens.
initialy All I was trying to do was downgrade 10.7 to 10.6 .

You have to consider the possibility the hard drive may be dying. If your data isn't backed up, try one of the tools below:
https://discussions.apple.com/docs/DOC-1689
Once you are sure your data is backed up, we can examine other possibilities. In the meantime call AppleCare for your original installation DVDs. You may need them.

How can I get an inserted video (FLV) in Presenter 7 to stay on the screen once it has finished pla

How can I get an inserted video (FLV) in Presenter 7 to stay on the screen once it has finished playing? Right now it disappears once it is done. I'd like it to remain on the screen, or loop if possible, until the user manually moves the presentation forward.

Hi,
You may set the slide setting as 'Advance by user'.
So,
a. Insert flv on a slide.
b. On presenter ribbon goto Slide Manager .
c. Select the slide on which flv is inserted and set Advance by user 'Yes'
Hope this solves your purpose.
Thanks,
Alpi

In website, Firefox will not go to the next screen. Instead I have to click 'allow'. This is on sites where I never had this problem. I want it back to the way it was.

On sites that I have been using for many months with no problem, when I click to go to the next screen (like 'continue'), it doesn't go to the screen. I get a bar and have to click 'Allow'. This is happening continuously on screens where it didn't do it before. If it were occasional I wouldn't mind. But it happens all the time. What was changed in Firefox to cause this problem. It has really been a pain paying bills online.

What is the message to the left of the Allow button? Hopefully with that information we can advise on changes to your settings to resolve the issue.
You also could supply a URL of a site that has this problem, assuming we don't need an account to check it out.

Error Message stays on the screen all the time

This message stays on my screen almost all the time. At the bottom it says "Press center to dismiss" but I have to press over and over multiple times to make it go away and then it usually comes right back anyway. The error message says "Firewire connections are not supported. To transfer songs, connect the USB cable provided." I don't have any other problems. It seems to be a bogus message and I can't get rid of it.

Have you tried these basic troubleshooting steps?
The Five Rs.

My iphone 3gs is not working properly, when switched on it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and more often than not just resets itself.

My iPhone 3gs is not working properly and hasn't been since about September of last year. When switched on (Quite often it won't even turn on) it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and just resets itself over and over until power is gone. Occasionally after switching on and off a few times it functions normally for a few hours and some times even a couple of days but eventually always turns itself off and goes back to the 'Update Completed' screen. Does anyone know what might be causing this and/or a way of fixing it?

Morning JordenR,
Thanks for using Apple Support Communities.
You can resolve many restore issues using the troubleshooting steps documented here.
For more information on this, take a look at this article:
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/ts1275
Best of luck,
Mario

HT201263 My phone is staying on Step 4 it won't even open Itunes. Please help! What is wrong with my phone? It stays on that screen and won't do anything else.

My phone is staying on Step 4 it won't even openn ITunes. Just stays on that screen and does nothing else! Please Help!

Have you tried holding the power and home button until it turns off?

Failure capture stays on next screen

Similar Messages

Maybe you are looking for