Fal_client, fal_server triggering when applying with delay .

Hi,
I'm on 10.2.0.3 RAC witn physical standby , old fasion config with no standby redo so shiping only after log switch .
We've got 10h delay and looks like gap resolving via fal client/server is triggered only when the acctual arch log
needs to be recovered and is not found on standby site, no when it is not shipped .
So, is that feature or bug ?
In my understanding gap resolving should trigger as soon as gap is detected ..
Looks like delay we using messed things up .
Regards.
Greg

Hi,
Well, the shipment of archive files is done by Primary database's Background. There is no involvment of Standy database in shipment of archive log files.
Hence Standy database cannot detect the recieved archived log files, unless while recovering. While trying to recover if it finds any missing archive log file, it sends a request to the primary for that particular log file and again Primary Database sends the files.
No, its not a bug, rather a neccessity. As Standby database does not know which sequence# is generated into archive log.
Yes, identifying the missed archived log while recovering will increase the delay. Below the example:
Primary Generates seq#: 100
Recovery process at DR : 90
Files transfered at DR:
90
91
92
93
94
95
96
97 missed
98
98
.. and so on.
Here until Standby recovers 96 seq number, it wont be able to know that Seq# 97 is missing, and hence the delay.
but for this we have to increase the Recovery speed by other ways documented.
Below given link is for Oracle 10g Best Practises: Dataguard Redo Apply and Media Recovery.
http://www.oracle.com/technetwork/database/features/availability/maa-wp-10grecoverybestpractices-129577.pdf
Hope this answers to your question.
regards,
Sajjad

Similar Messages

Is it normal for the Panels to make slight noises when applied with some pressure such as opening the and closing the Mac? It sounds like the screws are not tight enough or is it normal?

Hi, My Mac is around 2 months old, and I have recently come across a slight problem. I've experienced some slight noises happening such as when I open and close the macbook it makes some sort of clicking noises as if to say the panels are loose or have not been screwed properly... It only happens when pressure is applied e.g. when I am typing I tend to rest the palms of my hand on the two plain sections of the mac (next to the track pad) and this causes some sort of pressure to push down to the connecting panel underneath, this is when the clicking sound happens.
I don't know maybe I'm just expecting too much or it might just be what I think it is, anyway if anyone has experience this issue, feel free to share your point of views or past similar experience. Thanks.

Yes.. It's been a while, but I remember thinking the same thing!
Below are a couple of other links where folks reported the same thing!
http://discussions.apple.com/thread.jspa?messageID=5755300&#5755300
http://discussions.apple.com/thread.jspa?messageID=6552175&#6552175

Active data Guard but with delay on applying redo logs

Hello,
A question: Active Data Guard gives the possibility of having a physical stand-by database open read-only, for instance for making 'up-to-date' reports.
Data Guard also has the possibility to apply logs with delay, for instance with a delay of some hours. Every commit on primary database is applied to standby after the delay period.
Can this delay be combined with Active Data Guard? This means that standby database is open read-only but with the delay... In case the delay is 2 hours, every report created on standby is ("up-to-date" minus 2 hours)...
Thanks for your answer,
Jan.

Hello All,
I answered my own question: indeed it is possible to activate 'real time apply' but with a delay in applying the logs. In EM-11 check the box "enable real time query" and apply. Nect go to thje tab "standby role properties" and change the value after "Apply delay" to for instance 30 minutes. Apply also.
Log on on the primary, create a table, insert some rows and do some logswitches. Log in on the standby and check for the new table. Notice that after 30 minutes the switched logs are applied, even when you change the delay period within the 30 minutes. The information about the delay seems to be in the log, since it is possible to change the delay immediately after the logswitches to 3 minutes, drop the table and do some logswitches again. The logs with the 'create table' statement in it are NOT applied after 3 minutes, but still after 30 minutes. The drop of the table however is done after 3 minutes on the standby. So the 'delay' information is in the log sent over to the Stand-by!

Patch 9655006 failed with code 135 when applying to Oracle Restart

Hi all,
I install Oracle RAC single node version 11.2.0.1 on Linux (kernel 2.6.18).
I try to apply patch 9655006 (prerequis for upgrade to 11.2.0.2).
Everything is OK for grid applying with success.
When I apply this patch to oracle db home, I get :
Oracle Interim Patch Installer version 11.2.0.1.5
Copyright (c) 2010, Oracle Corporation. All rights reserved.
Argument(s) Error... Given 'ocmrf' file does not exists.
Please check the arguments and try again.
OPatch failed with error code 135
I've given the complete path and filename (same as for grid applying).
I've found A document [ID 1283954.1], but not useful in my case.
Any ideas for workaround ?
TIA
yang
ps. this does not occur when applying to a RAC with 2 nodes.

yang wrote:
Hi all,
I install Oracle RAC single node version 11.2.0.1 on Linux (kernel 2.6.18).
I try to apply patch 9655006 (prerequis for upgrade to 11.2.0.2).
Everything is OK for grid applying with success.
When I apply this patch to oracle db home, I get :
Oracle Interim Patch Installer version 11.2.0.1.5
Copyright (c) 2010, Oracle Corporation. All rights reserved.
Argument(s) Error... Given 'ocmrf' file does not exists.
Please check the arguments and try again.
OPatch failed with error code 135
I've given the complete path and filename (same as for grid applying).
I've found A document [ID 1283954.1], but not useful in my case.
Any ideas for workaround ?
TIA
yang
ps. this does not occur when applying to a RAC with 2 nodes.Hello Yang,
Could you try it again with debug info? Before you run the opatch, run the following:
$ set OPATCH_DEBUG=TRUE; export OPATCH_DEBUG
Regards
Gokhan

Notification Email should be triggered when hit the Apply changes?

Hi All,
Am creating a request form similiar to a remedy form,when ever the user create a new request and submit the request.Notification email will be sent to the user and the admin.
Here when the admin ppl rejects the request,a notification email triggered to the user like request has been rejected .
I have three radio buttons in the Form
1.Submitted(default).
2.Rejected.
3.Accepted.
When the admin edit the request and select rejected radio button,and apply changes ,a notification email should be triggered to the user.
Now i have a after submit process for edit the ,which will be triggered when ever the user hit the apply changes button and it will send notification to both user and admin.
How to achieve the notification email that should be triggered when the admin rejects the request and submit the form???
am using apex version 4.0
when the Admin will select the reject radio button and hit tha apply changes then the notification email should be sent to the user!!
Always appreciate your help!!!
Thanks & Regards,
Ramya.

Ramya wrote:
Hi Gurujothi,
Thanks for your response!.
I can able to send email now.Thing is i need to send an email like when the admin rejects the request.
For eg.
1.Admin opened the request and select the Reject radio button and clicking Applychanges button then the email notification will be sent to the user like,
Your request has been Rejected.
2.If the Admin selects the radio button accept radio button and clicked apply changes,start processing about the request then the Email notification will be sent to the user like ,
Your request has been modified .Request will be notified by the admin.(Working now)
DO i need to create two separate process for the email notification like
one is for all the modifications that the user/admin will do in the form ,once the record is created and another process is for Rejection purpose of the Form.But only one Apply changes button is there in the Form.You don't need two page process, In one single process you can acces the page item session values using *:YOUR_ITEM_NAME* bind variable syntax or V function like this V('YOUR_ITEM_NAME')
So in your PL/SQL code you can easily prepare the email body based on your radio group item's value
declare
l_body varchar2(4000);
begin
IF :Px_MY_RADIO_GROUP ='R' THEN
l_body := build your conditional email body for rejected
ELSIF :Px_MY_RADIO_GROUP ='A' THEN
l_body := build your conditional email body approved
END IF;
apex_mail.send(
        p_to       => '[email protected]',   -- change to your email address
        p_from     => '[email protected]', -- change to a real senders email address
        p_body     => l_body,
        p_subj     => 'APEX_MAIL Package - Plain Text message');
end;
See this http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21674/concept_ses_val.htm#HTMDB03012

I have the current Mac Pro the entry level with the default specification and i feel some slow performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest?

i have the current Mac Pro the entry level with the default configuration and i feel lack of performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest i could do on my Mac Pro ?

256GB SSD it shipped with will run low and one of the things to watch.
Default memory is 12GB also something to think about.
D500 and FCP-X 10.1+
http://macperformanceguide.com/index_topics.html#MacPro2013Performance
Five models of 2013 Mac Pro running Resolve, FCPX, After Effects, Photoshop, and Aperture

High CPU and Delay when applying metadata

Hi All:
I have an issue where my CPU hits 60% when applying keywords. This can be when I apply it to one image or to 100s. Obviously, when I have more pictures selected or more keywords, there is a much larger delay.
Ideas from anyone?
Thanks

Hi All,
There is a workaround to resolve this issue. As it is related to modifying registry, please be very careful and take backup of your registry first.
The workaround is to set the value of "Disable Performance Counters" to 0 @ HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\PerfProc\Performance
If this registry entry is not present, create one. Meanwhile, we are working on fixing this issue.
Hope this helps!
Thanks,
Deepika
PS: Edit the Registry at your own risk. Inappropriate changes to the Windows Registry can disable the operating system! To safeguard against such an accident, back up your existing registry by choosing Registry » Export Registry File after launching the Registry Editor and before making any changes

SG 7.1x158 crashes when applying custom look with Premier Dynamic Link

The sequence opens just fine, and I'm able to create a grade for a selected clip. However, when I save the custom look and then try to apply it to any other clip, SG crashes. Odd thing is that I've tried a couple of the example looks and they don't crash. Crash only occrus when I choose any of the custom looks I've saved.
Only workaround I see at this point is to apply the look using Lumetri in Premier, which seems to work just fine.
Anyone else run into this problem?
--Ken

Hi,
This is a known issue when applying custom looks with masks. We are working in a solution, please keep tuned.
Thanks,
Fran

Delay when applying large, hierarchical type definitions

Hello,
I searched around using various terms, but couldn't readily find posts on what I'm experiencing.
Has anyone else noticed huge delays when applying large, hierarchical type definitions? I've got about a dozen nested type definitions of clusters, each containing anywhere from 10 to 100 controls, and they're used throughout a large application. When I open any member of that hierarchy, make a small change, and hit apply, I see the hourglass (spinning ring of death in Vista/7) for a good two to five minutes.
A short term workaround has been to close all dependent VIs and typedefs, and then make an isolated edit. Then, if I open the whole application again, I see some compiling taking place, but it seems to take a lot less time than when the whole application is open.
I could have sworn that I read a discussion by some others commiserating about this at some point, but now I can't find it.
Has this been addressed, and has anyone heard if there's any development effort to improve this?
Thanks,
Jim

Hi Fred,
Thanks for getting back to me on this.
> You could use more specific typedefs and not a massive one to pass data through VIs.
It's funny, I've actually adopted using larger typdefs in the last year or two for architectural simplicity, and that's when I've noticed this becoming a problem. In fact, for what it's worth, right now I'm using a data reference to store the "data dictionary" (large typedef) but that doesn't really help the issue.
From an architectural sense, it makes things easier for me because I have much fewer wires to pass around most of my data is in one place.
> Or you could pass a queue reference to the subVIs and have the queue be made of of elements that are the large type definition.
Actually, I'm using a data reference right now, which is somewhat analogous to what you're suggesting. (Maybe not? I also use queues and notifiers depending on the situation.) I haven't really seen this technique help the issue; I'm still noticing the large delays, but only when editing the typedefs.
The only way I've really found relief is to separate the large typedef into smaller ones and pass them around separately. This is kind of a pain because it means I have many more references to data structures to keep track of.
> If this is causing major problems, let me know, and I'll pass along your concerns to R&D.
Actually, if I'm to be honest, it really is starting to become a hassle. I hit apply and end up working on something else for a few minutes while the compiler chugs away. I'd be really interested in an improvement in this area. If it makes things easier, I can discuss this via email and upload an application I'm working on as an example. (Multiple large apps I'm working on exhibit this behavior)
Thanks again for your help.
Regards,
Jim

Files appears on desktop with delay.

Hello! All my files that I save to the desktop and screenshots appears on it with delay. It takes more than 10 minutes for them to appear. But if I copy/paste an existing file on desktop or empty the trash can the screenshots appears immediately.
I have a lots of free RAM, no app running, and I have any idea

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) on the advice of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; BI () { $PB\ :CFBundleIdentifier "$1"; }; LC () { $2 launchctl list | awk 'NR>1 && !/0x|\.[0-9]+$|com\.apple\.(AirPortBaseStationAgent|launchctl\.(Aqua|Background|System))$/{print $3}' | grep -Fv "$1"; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"and $((l-25)) more line(s)"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps Model; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^EO]|x([^8]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm POST; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/s/^.*://p' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;/Apple|Intel|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm Heat; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; o=; fdesetup status | grep -q On && o=On; Ps FileVault; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel log"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; bi=`egrep '\.(kext|xpc)/(Contents/)?Info.plist$' <<< "$sys" | while read i; do [[ -f "$i" ]] && BI "$i"; done`; o=`kextstat -kl | grep -Fv "$bi" | cut -c53- | cut -d\< -f1`; Pm "Kernel extensions"; li=`egrep 'Launch[AD].+\.plist$' <<< "$sys"`; jl=`while read f; do [[ -f $f ]] && $PB\ :Label $f; done <<< "$li"`$'\n'"$bi"; R && o=`LC "$jl" sudo`; Pm Daemons; o=`LC "$jl"`; Pm Agents; o=`for d in {/,}L*/Lau*; do M; done | grep -Fv "$li" | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; p=`lsbom -pfc /var/db/*/*.BSD.bom | sed -En '/peri.+\/.+\./s/^\.\/[^/]+//p'`; [[ "$b" && "$l" && "$p" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do i="$d"/Info.plist; [[ -f "$i" ]] || continue; ID=$(BI "$i") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Shared libraries"; o=`find -L {,/u*/lo*}/e*/periodic -type f -exec cksum {} \; | awk '{print $3"\t"$1}' | grep -Fv "$p" | awk '{print $1}'`; Pm "Periodic scripts"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=; defaults read /Library/Preferences/com.apple.alf globalstate | grep -q 0 || o=On; Ps Firewall; o=`scutil --proxy | egrep 'Prox.+: [^0]'`; Pm Proxies; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm TCP/IP; [[ "$I" =~ [AW]i ]] && { o=`/S*/*/P*/*/*/*/*/airport -I | awk '/lR/{print $2}'`; o=$((o<=-87?o:0)); Ps RSSI; }; R && o=`sudo profiles -P | grep : | wc -l`; Ps Profiles; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc hosts <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "App check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`find .??* -path .Trash -prune -o -type d -name *.app -print -prune`; Pm "Hidden apps"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font issues"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps UID; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I have problem with delay in serial port

I have problem with serial port. I have connected two computers by serial port and I need to create program in Labview for transfer strings using start bits and stop bits. My problem is that my program is working quite well ...when I press start bit it starts to concatenate strings and if i press stop bits it stops...this is the purpose of this program...but problem is that it working only with delay...and need that this program dont need delay, because it can only concatenating data depends on delay from start bit....I wana solved problem with delay...I dont want using delay process in my program, but allways when I try to delete this delay it stop works correct
here is my program

Ok this should be simple - if I understand you correctly.
You have the VISA session initialized with read termination character enabled. So reading the number of bytes at port is NOT the correct way to read from the port. Set the read number of bytes to something large (say 4096) and the read will return as soon as a termination character is received (or timeout).
You'll need to make sure the sending device is configured to send termination character on writes (you can set that with a VISA property node) and that you are sending the correct termination character. The default is 0x0A (newline).
Jeff

Error when applying a XSLT transformation

central instance
transaction SURVEY
Extras->Target Group Hierarchy-> Import from file
select file
Error when applying a XSLT transformation
dialog instance working

Hello Andrey Kuryanov,
Could make sure you describe the problem more clear as much as you can so that community can help you better.
Please provide more details with more detailed steps and actual error messge.
Thanks
Raja Pamireddy
Moderator

Very slow responce when working with Office file on DFS-Share

Very slow responce when working with Office file on DFS-Share
We have implemented the following configuration
Domain level Windows 2000. Two member servers with Windows Server 2008 R2, sharing the same DFS namespace with, at the moment, one folder target called Home.
Users complaining that the access to different MS Office files is very slow. Even creating a new MS Word document using right click context menu takes up to 4 minutes to open. Saving, for example, one singe Excel sheet takes also few minutes.
Tested with both, MS Office 2007 and MS Office 2010. Makes no difference. When using Office 2010 you can see the message like contacting:
\\DomainName\Root\Home\UserName. Other files like TXT, JPG or PDF are not affected.
What makes the thing really weird is the fact, that the behavior described above can absolutely change after client machine being rebooted, suddenly everything becomes very fast and this condition can revert back again just after the next
reboot.
Considerations until now:
1. This has nothing to do with the file size. Even tiny files are affected.
2. AD Sites are configured correctly and the client workstations see themselves in the correct sites.
3. This is not an Office issue. If I map my folder target not as DFS, but directly as shared network drive
\\ServerName\Root\Home\UserName , everything functions as expected
What makes me suspicious: when using f.e. TCPView to monitor connections, I can see, that each time I make any operation on an office file, there will be a connection established to one of the domain controllers, sometimes to remote ones,
located in other countries. But on the other side, even if the connection is established to the nearest DC, operations are still very very slow!
Just forget to say. All clients are Windows 7
Thanks to all who respond.

Dear all,
sorry for the delayed reply. The problem has been solved now and since September 19<sup>th</sup>. everything is functioning as expected.
What was done:
Deleted replication targets excepting the initial ones
Carefully recreated folder targets
Deleted and recreated replication groups
Disabled SNP features on both namespace servers
Created EnableTCPA registry entry
Checked that the following Updates are installed
http://support.microsoft.com/kb/2688074
http://support.microsoft.com/kb/2647452
Concering Office File validation KB2553065 - This Update was already declined on our WSUS server
Kind Regards
Eduard

Error FS206 Down pmnts w/ taxes not permitted when processing with jur.code

Issue: I am encountering a problem entering Taxes when applying down payments received from customers since we are using a jurisdiction code taxation procedure. This process works as desired in Europe for our firm. I found OSS 97288 which is not valid for version ECC 6.0. Please assist due to US go-live in 2 weeks.Process: Create Down Payment Request for cash in advance. Required to tax at this point. Billing document creates a noted item in the G/L (Special G/L). I apply customer's payment via transaction F-29 and receive error "FS206 Down pmnts with taxes are not permitted when processing with jur.code."
Settings: 1) Alternative Recon account for Special GL posting has The tax category on the GL account = B "Output tax - down payments managed gross." 2) Transaction OBXB specifies tax clearing account for transaction key MVA. This G/Laccount has same tax category setting (B). My settings work perfectly for Europe since they are not taxed via juridicition codes.
Thank you in advance!

Check the GL master of the alternative recon account. Ideally there should be no setting in the tax fields as there is no tax calculated on down payment but only on the final amount. Leave the tax fiel blank and do not check mark posting without tax allowed.

Creating a pop-up in Acrobat X that is triggered when the PDF is opened.

Hello all,
I am wanting to create a pop-up that is triggered when the PDF is opened.
The problem I am facing is that our customers are filling out the packet , but are not using the purple "Submit" button located at the top of the page to submit the form to us. They are instead printing out the form and faxing it to us, or scanning and emailing the packet, which defeats the whole purpose of it being a fillable, distributed pdf.
The email invitation that they receive is a bit wordy so I have have pared that down as well. To be honest with the amount of "Read this first" pop ups that we are exposed to daily I think that our customers are simply not reading the instructions properly.
There was a post here in the forums but the expanation was for Acrobat 7 or 8.
Any help is appreciated.

Thank you for the quick response George. I guess a better way communicate what I need to accomplish is "how"
I went to the toolbar on the right, then "javascript", then "Document Java Scripts". That opened a window that had me name the script, then add it, then put in the scripting (see below). I do not know how to "place it in a document-level JavaScript (outside of a function definition) or in the initial page's Page Open event."
This is the script I am attempting to use.
var message = "When you have completed filling out the Tax Organizer, click on the purple "SUBMIT" button at the top of the page. This will automaticall submit your Tax Organizer for you. Be sure to print a copy for your files"
app.alert(msg,3);
If you could provide some step by steps that would be super.
I am wanting this pop-up box to open and the client will have to then click on the "ok" button to make it dissapear so that they can then fill out the PDF.
The "Submit" button is auto created for me when I choose to distribute the form, I am unaware of any way to move it.
I feel that my issue is a elementary one, I am currently working through the Adobe Classroom in a Book lessons as all my acrobat skills have been self taught.

Fal_client, fal_server triggering when applying with delay .

Similar Messages

Maybe you are looking for