Is it normal for the Panels to make slight noises when applied with some pressure such as opening the and closing the Mac? It sounds like the screws are not tight enough or is it normal?

Hi, My Mac is around 2 months old, and I have recently come across a slight problem. I've experienced some slight noises happening such as when I open and close the macbook it makes some sort of clicking noises as if to say the panels are loose or have not been screwed properly... It only happens when pressure is applied e.g. when I am typing I tend to rest the palms of my hand on the two plain sections of the mac (next to the track pad) and this causes some sort of pressure to push down to the connecting panel underneath, this is when the clicking sound happens.
I don't know maybe I'm just expecting too much or it might just be what I think it is, anyway if anyone has experience this issue, feel free to share your point of views or past similar experience. Thanks.

Yes.. It's been a while, but I remember thinking the same thing!
Below are a couple of other links where folks reported the same thing!
http://discussions.apple.com/thread.jspa?messageID=5755300&#5755300
http://discussions.apple.com/thread.jspa?messageID=6552175&#6552175

Similar Messages

Is there a way to set up a dial tone or a way for someone who is hard of hearing to have the phone set up to make a noise when I hold it up to my ear?

Is there a way to set up an dial tone or set the phone up to make a noise when I hold it up to my ear when i use it

I'm also not sure what you want to accomplish by this. Until you hit the "call" button, the phone is not 'off hook' like a traditional landline would be. There is no such thing as a dial tone on any cell phone. The dial tone was simply a carrier signal from the central office that prepared that end to listen for the pulses (later tones) generated when you dialed.

Can anyone help me as to why my raw files in bridge are not showing as thumbnails as they normally do . I can seem to fix it

Can anyone help me as to why my raw files in bridge are not showing as thumbnails as they normally do . I can seem to fix it

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

My ipods screan is black and it wont turn on but it still makes a noise when i plug it in to the charger. can anyone help?

my ipod isnt turning on but it still makes a noise when i plug it into the charger can anyone help me?

Hey there cameronw99,
It sounds like you are unable to see your iPod Touch screen, as it stays black but it makes the connection tone when you plug in the USB cable. Use these steps to resolve the issue with the iPod from the following article:
iOS: Not responding or does not turn on
chttp://support.apple.com/kb/ts3281
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
Thank you for using Apple Support Communities.
Take care,
Sterling

My PH m7160n Desktop PC the power supply make high noise no signal to the monitor

my PH Media Center m7160n desktop PC the power supply make loud noise and no signal to the monitor I already replace the power supply but still the same, Thanks
Davilea

Hello @davilea,
I understand that you are getting a loud noise from your computer and a 'No Signal' message on your HP Media Center m7160n Desktop PC's monitor. As you have already replaced the power supply I will provide you with the HP Support document: Flat Panel Monitor Displays Message about No Signal, Signal out of Range, Sleep, or Power Save, which should help you resolve the 'No Signal' message.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

How can I get a date picker or wheel to show up in the form to make filling in a form with a lot of

how can I get a date picker or wheel to show up in the form to make filling in a form with a lot of dates more easy?

There is no built-in date picker available for forms created in Acrobat. There are some third-party solutions involving JavaScript (either a large collection of fields or a custom dialog) though. Also, text fields with date formatting will use a wheel type date picker on Android/iOS devices with Adobe Reader.

How do you get your ipod touch to make a noise when people text you and to pop up on the screen my friend did something to her ipod to do this but i dont know how please help!!!!!!!!!!!!!!!!!!!!!!!!!!! its like she updated it but i already tried it!!!!!!

how do you get your ipod touch to make a noise when people text you and to pop up on the screen my friend did something to her ipod to do this but i dont know how please help!!!!!!!!!!!!!!!!!!!!!!!!!!! its like she updated it but i already tried it!!!!!!i am very confused and want my ipod touch 4g like that please help thxns:)

Go to Settings>Notifications and turn alerts/sounds on for the app(s) in question. Not all apps have all options.

Bottom sheet of metal seems loose. It makes a noise when I put pressure on it, and the screw looks slightly misplaced.

MacBook Air - Bottom sheet of metal seems loose. It makes a noise when I put pressure on it, and the screw looks slightly misplaced.

loctite (liquid plastic bonding agent for screws) broke loose holding a screw to the bottom plate.
make an appt. with your local Apple store for a quick fix, easy remedy.

I'm using GarageBand 10.0.1. Do the built-in drum tracks only come in mono format, or is it possible to make them true stereo (i.e. Left and Right channels outputing different signals, to sound like the kit has been panned across the stereo field)?

I'm using GarageBand 10.0.1. Do the built-in drum tracks only come in mono format, or is it possible to make them true stereo (i.e. Left and Right channels putting out different signals, to sound like the kit has been panned across the stereo field)?

All the Drum Kits available for GarageBand are mixed in stereo.
Logic provides the same 18 Drum Kits also as "Producer Kits", which are multi-track outputs,. Each Drum Kit Piece (Kick, Snare, HH, etc) and also room mice and overheads are routed to individual channel strips.
Here is a screenshot of one Drum Kit in Logic Pro X with individual Channels Strips. Each Channel Strip can be loaded with individual effects (compressor) and adduced with individual sends, etc.
What that means is that all the Drummers are professionally recorded and sampled with individual mics. The Stereo Drums Kits are just "stereo mix-downs" for easier handling and less CPU demand. I explain all the details about the Drummer ecosystem in my graphically enhanced manual "GarageBand X - How it Works"
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

HT1349 my phone keeps freezing on settings, I cannot make or receive a call but everything else is working including internet and mail. where it should be showing the reception bars it is only showing a broken line. How do I resolve this?

my phone keeps freezing on settings, I cannot make or receive a call but everything else is working including internet and mail. where it should be showing the reception bars it is only showing a broken line. How do I resolve this?

If you are not showing reception bars, then I don't know how the data is working? Have you tried doing a reset? Hold the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone restarts, check to see if it works. If that doesn't help, then try removing the SIM card, then reinserting it. If that doesn't help, then contact your carrier for assistance in calling.

Is it normal for 10-20% cpu to be used when idle and watching activity monitor?

Is it normal for 10-20% cpu to be used when idle and watching activity monitor?
I have a macbook 6,1, 4gb of ram, and my os seems to be spinning the rainbow quite often and laggy. I watch my activity monitor and it never drops below 90% cpu available. Is this normal? if not what can I do to clean up my os. Does anyone have any resources or help? Thanks

Hello:
Answer - no.
The activity monitor should indicate what is consuming the processor when your system is idle.
I just looked at my own system with Safari running and the usage is about 3%.
Barry

HT201240 This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I

This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I created. I am logged in as myself and it states that I am an "Admin". The user I'm attempting to change is listed as a "standard" user and there is a white checkmark inside an orange circular background on the user pic in the list of users.
Can someone help me? I am having a hard time believing that OSx will allow me to create users and allow them use of my computer and it's drives, yet it will not allow me to change the password so I can monitor what they might have been doing while logged on? What if this were my child? This guest left under sketchy circumstances, and I'd really like to be able to ensure they were not using my computer to do illegal things or to have illegal communications.
Any help would be appreciated. (It's odd that it was so simple to "create" a user and set a password for them.......but it's complicated or a little known process to reverse.
Thanks.

Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.

My parent's IPad is SUPER outdated and I'm trying to buy an app for my brother for Christmas. However, the computer that was connected to the IPAD, we no longer have. So is there any way I can update it on my mac without erasing all the photos and videos?

My parent's IPad is SUPER outdated and I'm trying to buy an app for my brother for Christmas. However, I can't buy the app because it says we need to update the software. The thing is, the computer that was connected to the IPAD, we no longer have. So is there any way I can update it on my mac without erasing all the photos and videos?

HELPPP ME BEFORE CHRISTMASS MORNING!!

I am looking at buying a MacBook Air over the Pro mainly for the 12 hour battery. Just wondering if battery is compromised by upgrading to 8mb and upgrading to I7 Intel dual core. I am not very tech savvy so apologies if dumb question

I am looking at buying a MacBook Air over the Pro mainly for the 12 hour battery. Just wondering if battery is compromised by upgrading to 8mb and upgrading to I7 Intel dual core. I am not very tech savvy so apologies if dumb question

If both computers were configured identically, then they would both lose the same amount of battery life with respect to the same starting configuration - comparing apple to apples. I don't know how much the added RAM, etc. would reduce battery life, but it would be less for both models.
Battery life is a tricky subject because most mfgr.s like to suggest as long a life as possible, but often do so under a set of conditions that are not common to most users. Apple is no different. Their computers do have good battery life, however. But not likely as long as what is in the ads for the typical user.

I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions

I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions

Options for when an iOS device gets locked because of forgotten passcode:
Restore (and reset passcode) on your device by connecting it to the last computer to which it was connected:
iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)
If recovery does not work there's:
DFU mode: http://osxdaily.com/2010/12/04/ipad-dfu-mode/
How to put iPod touch / iPhone into DFU mode - http://geekindisguise.wordpress.com/2009/07/16/how-to-put-ipod-touch-iphone-into -dfu-mode/

Is it normal for the Panels to make slight noises when applied with some pressure such as opening the and closing the Mac? It sounds like the screws are not tight enough or is it normal?

Similar Messages

Maybe you are looking for