Fastest type of data repository vi
I have inherited a large LV application that in some instances runs VERY slowly. This is almost exclusively due to data transfers either between the application and the database or between some vis accessing data in repository vis. The first time data is required, it is read from the database (via ODBC) and stuck into a LV repository with an associated ID number (i.e. this is a bare-bones version of a goop class). This repository was written to be as simple (and efficient?) as possible and is basically a reentrant vi with an uninitialized shift register that contains an array of clusters. You can create, delete, read and write data into the repository as a variant. Some of the clusters of data are quite large (>100 controls) and might contain sub-clusters or arrays of strings/numbers (i know, i know....).
There are about 10 different repositories running. Each repository might contain data for up to 30 elements. Repositories as a whole are accessed about 1000 times and the database 200 times for a given operation (which therefore ends up taking about 20 secs!)
Since i do not have the luxury of rewriting the entire application from scratch, I need ideas as to how to speed things up. So: Is there a faster way to store/retrieve data than the repository i described? Is massive parallelism and an 8-core chip my only savior?
I am running LV 7.1 on XP. I've attached a jpeg of the repository.
Thanks for any ideas
Solved!
Go to Solution.
Attachments:
data repository block diagram.JPG 75 KB
Michael Ludwig wrote:
I have inherited a large LV application that in some instances runs VERY slowly. This is almost exclusively due to data transfers either between the application and the database or between some vis accessing data in repository vis. The first time data is required, it is read from the database (via ODBC) and stuck into a LV repository with an associated ID number (i.e. this is a bare-bones version of a goop class). This repository was written to be as simple (and efficient?) as possible and is basically a reentrant vi with an uninitialized shift register that contains an array of clusters. You can create, delete, read and write data into the repository as a variant. Some of the clusters of data are quite large (>100 controls) and might contain sub-clusters or arrays of strings/numbers (i know, i know....).
There are about 10 different repositories running. Each repository might contain data for up to 30 elements. Repositories as a whole are accessed about 1000 times and the database 200 times for a given operation (which therefore ends up taking about 20 secs!)
Since i do not have the luxury of rewriting the entire application from scratch, I need ideas as to how to speed things up. So: Is there a faster way to store/retrieve data than the repository i described? Is massive parallelism and an 8-core chip my only savior?
I am running LV 7.1 on XP. I've attached a jpeg of the repository.
Thanks for any ideas
If you do not want to re-write it then the answer to your question "massive parallelism and an 8-core chip my only savior?" is yes.
An upgrade to LV 2009 would aloow you to harness the native LVOOP functions where the by-ref approach can be implemented using single element queues or a DVR (dat value reference).
That performance issue you mentioned is what kept me from OOP until it was native LV.
I hope someone posts back and proves me wrong (I love to learn new performance tricks)!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Similar Messages
-
Difference b/w DATA TYPE and DATA OBJECT & differences b/w TYPE and LIKE
hai
can any one say the differences between Data type and Data Object.
And also differences between TYPE and LIKE
thanks
Ganihi,
_Data Types and Data Objects_
Programs work with local program data that is, with byte sequences in the working memory. Byte sequences that belong together are called fields and are characterized by a length, an identity (name), and as a further attribute by a data type. All programming languages have a concept that describes how the contents of a field are interpreted according to the data type.
In the ABAP type concept, fields are called data objects. Each data object is thus an instance of an abstract data type. There are separate name spaces for data objects and data types. This means that a name can be the name of a data object as well as the name of a data type simultaneously.
Data Types
As well as occurring as attributes of a data object, data types can also be defined independently. You can then use them later on in conjunction with a data object. The definition of a user-defined data type is based on a set of predefined elementary data types. You can define data types either locally in the declaration part of a program using the TYPESstatement) or globally in the ABAP Dictionary. You can use your own data types to declare data objects or to check the types of parameters in generic operations.
All programming languages distinguish between various types of data with various uses, such as .. type data for storing or displaying values and numerical data for calculations. The attributes in question are described using data types. You can define, for example, how data is stored in the repository, and how the ABAP statements work with the data.
Data types can be divided into elementary, reference, and complex types.
a. Elementary Types
These are data types of fixed or variable length that are not made up of other types.
The difference between variable length data types and fixed length data types is that the length and the memory space required by data objects of variable length data types can change dynamically during runtime, and that these data types cannot be defined irreversibly while the data object is being declared.
Predefined and User-Defined Elementary Data Types
You can also define your own elementary data types in ABAP using the TYPES statement. You base these on the predefined data types. This determines all of the technical attributes of the new data type. For example, you could define a data type P_2 with two decimal places, based on the predefined data type P. You could then use this new type in your data declarations.
b. Reference Types
Reference types are deep data types that describe reference variables, that is, data objects that contain references. A reference variable can be defined as a component of a complex data object such as a structure or internal table as well as a single field.
c. Complex Data Types
Complex data types are made up of other data types. A distinction is made here between structured types and table types.
Data Objects
Data objects are the physical units with which ABAP statements work at runtime. The contents of a data object occupy memory space in the program. ABAP statements access these contents by addressing the name of the data object and interpret them according to the data type.. For example, statements can write the contents of data objects in lists or in the database, they can pass them to and receive them from routines, they can change them by assigning new values, and they can compare them in logical expressions.
Each ABAP data object has a set of technical attributes, which are fully defined at all times when an ABAP program is running (field length, number of decimal places, and data type). You declare data objects either statically in the declaration part of an ABAP program (the most important statement for this is DATA), or dynamically at runtime (for example, when you call procedures). As well as fields in the memory area of the program, the program also treats literals like data objects.
A data object is a part of the repository whose content can be addressed and interpreted by the program. All data objects must be declared in the ABAP program and are not persistent, meaning that they only exist while the program is being executed. Before you can process persistent data (such as data from a database table or from a sequential file), you must read it into data objects first. Conversely, if you want to retain the contents of a data object beyond the end of the program, you must save it in a persistent form.
Declaring Data Objects
Apart from the interface parameters of procedures, you declare all of the data objects in an ABAP program or procedure in its declaration part. These declarative statements establish the data type of the object, along with any missing technical attributes. This takes place before the program is actually executed. The technical attributes can then be queried while the program is running.
The interface parameters of procedures are generated as local data objects, but only when the procedure is actually called. You can define the technical attributes of the interface parameters in the procedure itself. If you do not, they adopt the attributes of the parameters from which they receive their values.
ABAP contains the following kinds of data objects:
a. Literals
Literals are not created by declarative statements. Instead, they exist in the program source code. Like all data objects, they have fixed technical attributes (field length, number of decimal places, data type), but no name. They are therefore referred to as unnamed data objects.
b. Named Data Objects
Data objects that have a name that you can use to address the ABAP program are known as named objects. These can be objects of various types, including text symbols, variables and constants.
Text symbols are pointers to texts in the text pool of the ABAP program. When the program starts, the corresponding data objects are generated from the texts stored in the text pool. They can be addressed using the name of the text symbol.
Variables are data objects whose contents can be changed using ABAP statements. You declare variables using the DATA, CLASS-DATA, STATICS, PARAMETERS, SELECT-OPTIONS, and RANGESstatements.
Constants are data objects whose contents cannot be changed. You declare constants using the CONSTANTSstatement.
c. Anonymous Data Objects
Data objects that cannot be addressed using a name are known as anonymous data objects. They are created using the CREATE DATAstatement and can be addressed using reference variables.
d. System-Defined Data Objects
System-defined data objects do not have to be declared explicitly - they are always available at runtime.
e. Interface Work Areas
Interface work areas are special variables that serve as interfaces between programs, screens, and logical databases. You declare interface work areas using the TABLES and NODESstatements.
What is the difference between Type and Like?
Answer1:
TYPE, you assign datatype directly to the data object while declaring.
LIKE,you assign the datatype of another object to the declaring data object. The datatype is referenced indirectly.
Answer2:
Type is a keyword used to refer to a data type whereas Like is a keyword used to copy the existing properties of already existing data object.
Answer3:
type refers the existing data type
like refers the existing data object
reward if useful
thanks and regards
suma sailaja pvn -
How to Transfer IDoc Type to Data Type in XI
Dear All,
I am working on scenario to transfer data(IDoc) from SAP System to Non SAP system through XI.
While Defining "Data Type" in XI i want to create Data Type as of IDoc type(CREMAS05).There is any direct method to import IDoc type into "Data Type" in XI.
thanks,
RPHi Rp,
External definitions enable you to import WSDL, XSD, and DTD documents to the Integration Repository so that you can access the message definitions they contain as external messages.
If a description of the message structure already exists in one of the above formats, you can use it in the Integration Repository by importing it as an external definition rather than re-entering it manually using the data type editor.
Prerequisites
The document to be imported must conform to the WSDL, XSD, or DTD standard.
Chk out all the details + how to import Ext Def:
http://help.sap.com/saphelp_nw04/helpdata/en/26/9e97b0f525d743882936c2d6f375c7/content.htm
Also refer...
Connection Using Adapters and Imported Interfaces
http://help.sap.com/saphelp_nw04/helpdata/en/4a/576d219c340844aaa12ce9bbc2c3ee/frameset.htm
Incase u want to chk out the details of Idoc scenario.....
IDoc to File:
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
Handling different partners for IDoc:
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/file%2bto%2bidoc
Hope this was helpful..
kanan -
HT3231 What cables are necessary for the fastest transfer of data from MacBook Pro to MacBook Air
What cables are necessary for the fastest transfer of data from MacBook Pro to MacBook Air
As I posted "it is an Unknown", at least to me, what type FW port is on the OPs older Mac.
LowLuster
HT3231 Re: What cables are necessary for the fastest transfer of data from MacBook Pro to MacBook Air
Dec 26, 2013 8:04 PM (in response to OGELTHORPE)
But the newest Mac notebooks do not have a firewire port.
So he may need a TB to FW adapter, $29, a FW 400 or 800 cable, $??, and then a FW 400 to 800 cable/port adapter (If the old Mac only has a FW 400 port), $??.
It is unknown if the old Mac has a FW 400 or 800 port. -
How to use the date repository variable in filter expression
Hi Gurus
I am getting error in using the date repository variable in Filter expression. I am using the below formula
filter( Fact.calls USING "Dim Time"."Fiscal Month End Date" = VALUEOF("month_start") )
I am getting below error
Formula syntax is invalid.
[nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 22024] A comparison is being carried out between non-compatible types. (HY000)
SQL Issued: SELECT filter( fact.Calls using "Dim Time"."Fiscal Month End Date" =VALUEOF("month_start")) FROM "Call Data"
Then i tryed the below format i am getting still the error
filter( Fact.calls USING "Dim Time"."Fiscal Month End Date" = DATE'(VALUEOF("month_start"))' )
Formula syntax is invalid.
[nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 46047] Datetime value (VALUEOF("month_start")) from (VALUEOF("month_start")) does not match the specified format. (HY000)
SQL Issued: SELECT filter( Fact.Calls using "Dim Time"."Fiscal Month End Date" =DATE'(VALUEOF("month_start"))') FROM "Call Data"
Please let me know what i am missing or what is the correct syntax for fitler using the date repository variable.
Thanks in advance
Regards
@liHi @li,
Syntax-1 is fine it will work,What kind of Variable is it?
Static or Dynamic
Thanks, -
diff b/w data types and data objects
hi prasanth,
Data Types and Data Objects
Programs work with local program data that is, with byte sequences in the working memory. Byte sequences that belong together are called fields and are characterized by a length, an identity (name), and as a further attribute by a data type. All programming languages have a concept that describes how the contents of a field are interpreted according to the data type.
In the ABAP type concept, fields are called data objects. Each data object is thus an instance of an abstract data type. There are separate name spaces for data objects and data types. This means that a name can be the name of a data object as well as the name of a data type simultaneously.
Data Types
Data types are templates for creating data objects. Data types can be defined independently in the ABAP program or in the ABAP Dictionary. As attributes of a data object, data types can also exist in a non-independent state. Data types do not use any memory space for work data, but may require memory for administration information.
As well as occurring as attributes of a data object, data types can also be defined independently. You can then use them later on in conjunction with a data object. The definition of a user-defined data type is based on a set of predefined elementary data types. You can define data types either locally in the declaration part of a program using the TYPESstatement) or globally in the ABAP Dictionary. You can use your own data types to declare data objects or to check the types of parameters in generic operations.
All programming languages distinguish between various types of data with various uses, such as .. type data for storing or displaying values and numerical data for calculations. The attributes in question are described using data types. You can define, for example, how data is stored in the repository, and how the ABAP statements work with the data.
Data types can be divided into elementary, reference, and complex types.
a. Elementary Types
These are data types of fixed or variable length that are not made up of other types.
The difference between variable length data types and fixed length data types is that the length and the memory space required by data objects of variable length data types can change dynamically during runtime, and that these data types cannot be defined irreversibly while the data object is being declared.
Predefined and User-Defined Elementary Data Types
You can also define your own elementary data types in ABAP using the TYPES statement. You base these on the predefined data types. This determines all of the technical attributes of the new data type. For example, you could define a data type P_2 with two decimal places, based on the predefined data type P. You could then use this new type in your data declarations.
b. Reference Types
Reference types are deep data types that describe reference variables, that is, data objects that contain references. A reference variable can be defined as a component of a complex data object such as a structure or internal table as well as a single field.
c. Complex Data Types
Complex data types are made up of other data types. A distinction is made here between structured types and table types.
Data Objects
A data object is an instance of a data type and occupies as much memory space as its type specifies. An ABAP program only works with data that is available as content of data objects. Data objects are either created implicitly as named data objects, or exanonymous data objects using CREATEDATA.
Data objects are the physical units with which ABAP statements work at runtime. The contents of a data object occupy memory space in the program. ABAP statements access these contents by addressing the name of the data object and interpret them according to the data type.. For example, statements can write the contents of data objects in lists or in the database, they can pass them to and receive them from routines, they can change them by assigning new values, and they can compare them in logical expressions.
Each ABAP data object has a set of technical attributes, which are fully defined at all times when an ABAP program is running (field length, number of decimal places, and data type). You declare data objects either statically in the declaration part of an ABAP program (the most important statement for this is DATA), or dynamically at runtime (for example, when you call procedures). As well as fields in the memory area of the program, the program also treats literals like data objects.
A data object is a part of the repository whose content can be addressed and interpreted by the program. All data objects must be declared in the ABAP program and are not persistent, meaning that they only exist while the program is being executed. Before you can process persistent data (such as data from a database table or from a sequential file), you must read it into data objects first. Conversely, if you want to retain the contents of a data object beyond the end of the program, you must save it in a persistent form.
Declaring Data Objects
Apart from the interface parameters of procedures, you declare all of the data objects in an ABAP program or procedure in its declaration part. These declarative statements establish the data type of the object, along with any missing technical attributes. This takes place before the program is actually executed. The technical attributes can then be queried while the program is running.
The interface parameters of procedures are generated as local data objects, but only when the procedure is actually called. You can define the technical attributes of the interface parameters in the procedure itself. If you do not, they adopt the attributes of the parameters from which they receive their values.
ABAP contains the following kinds of data objects:
a. Literals
Literals are not created by declarative statements. Instead, they exist in the program source code. Like all data objects, they have fixed technical attributes (field length, number of decimal places, data type), but no name. They are therefore referred to as unnamed data objects.
b. Named Data Objects
Data objects that have a name that you can use to address the ABAP program are known as named objects. These can be objects of various types, including text symbols, variables and constants.
Text symbols are pointers to texts in the text pool of the ABAP program. When the program starts, the corresponding data objects are generated from the texts stored in the text pool. They can be addressed using the name of the text symbol.
Variables are data objects whose contents can be changed using ABAP statements. You declare variables using the DATA, CLASS-DATA, STATICS, PARAMETERS, SELECT-OPTIONS, and RANGESstatements.
Constants are data objects whose contents cannot be changed. You declare constants using the CONSTANTSstatement.
c. Anonymous Data Objects
Data objects that cannot be addressed using a name are known as anonymous data objects. They are created using the CREATE DATAstatement and can be addressed using reference variables.
d. System-Defined Data Objects
System-defined data objects do not have to be declared explicitly - they are always available at runtime.
e. Interface Work Areas
Interface work areas are special variables that serve as interfaces between programs, screens, and logical databases. You declare interface work areas using the TABLES and NODESstatements.
regards,
sravanthi -
Doubt on diff types of data plz clarify
1) we know that there r 3 types of data like i)customizing data/control data ii)master data iii)transactional data.will these three types of data reside in the same database table are some set of database tables form each categeory?
2)how to define customizing data/control data,master data,transactional data with examples?
3)is there any difference between customizing data/control data,master data and transactional data?
4)what is buffering?can u plz explain single record buffering,generic buffering,full buffering with examples?
5)is there any site where we can test our abap knowledge?hi
chk this
Buffering
The major difference between the context buffer and the normal database and table buffers is that it is only refreshed at given intervals. There is no attempt to update it synchronously, or even nearly synchronously. This means that it is not appropriate to use it for every context or context module.
Buffering Types
Permanent (P): This is the default setting. In this case, the data is kept on each application server beyond the end of the transaction in which it is used. The buffer is reset every hour on the hour (8:00, 9:00...). You can reset the buffer manually in the Context Builder.
Temporary (T): Data is only buffered for the duration of the current transaction.
No buffering (N)
Buffer Size
You can set the maximum number of entries to be buffered. The default is 128. This number only applies to the permanent buffer for a single module. Within a transaction, all of the data that occurs is stored in the buffer unless you have switched off buffering for the module. It is usually best to leave the maximum buffer size set to 128. It is not often that a large number of key combinations occur within one hour on a single application server. Even if this does occur, you can expect combiniations from the first 128 entries to be repeated. The system resets the buffer after one hour, which should ensure that no one module monpolizes it.
Buffering Types
An I buffer is a table that assigns derived values to the input fields of the module. It
Only contains one entry with key values.
An E buffer is a table that assigns the derived values of the module tot he key fields of the context, It
contains more than one entry with key values.
can be a join of all I buffers for the modules buffered
Performance
The E buffer gives the fastest access, since it can find the values requested in the DEMAND statement in a single step. Under certain circumstances, it can return a smaller number of hits than the I buffer. -
Extracting Movement type wise data(MSEG) based on posting date from 0IC_C03
Hi Experts,
I have implemented 0IC_C03 in devlopment client and preparing a Physical Inventory report.
I want to know if I can directly extract the fugures such as Process Loss, Sales, Sales Return, Transfer In and transfer out from the cube 0IC_C03 so, my question is ...
Is it possible to extract the movement type wise data as in MSEG from any KF of 0IC_C03 ?? If its possible which particular KF should I use from the cube ??
Please respond at the earliest.
Thanks,
RomilHi,
You can extract 0RECTOTSTCK & 0ISSTOTSTCK from 0IC_C03 but you need put corresponding Movment type for each
you can't put 0TOTALSTCK, it is Non-cumulative key fig,
even all key fig except Non-Cumulative key Fig like (0TOTALSTCK , 0VALSTCKQTY , 0VALSTCKVAL.....) can be extracted
Best Regards
Obaid -
How to create a line type in data dictionary
How to create a line type in data dictionary?Please explain step by step?
Thanks & Regads,
SairamHi,
the details abbout the line type.
The line type of a table type can be defined by:
o Specification of a type that already exists (data element,
structure, table type, table, view) whose properties are then copie
as properties of the defined table line.
o Direct type input, where data type, number of positions, and, if
required, decimal places, are entered directly.
o Specification of a reference type.
and SE11 and click on datatype and click on table type and enter the line type.
Thanks
Shiva -
Unicode - "DMBTR" must be a character-type field (data type C,N,D or T)
Greetings Experts!
I am trying to convert legacy code to Unicode for a current ERP6.0 reinstallation and have encountered the syntax error "DMBTR" must be a character-type field (data type C,N,D or T)
The field is part of a structure and the fields attributes are as follows:
COMPONENT = DMBTR
COMPONENT TYPE = DMBTR
DATA TYPE = CURR
LENGTH = 13
DECIMALS = 2
DESCRIPTION = Amount in Local Currency
The code in question is as follows:-
macro Move_Zoned.
Converts a numeric variable to zoned format and moves it to a
target variable.
DEFINE move_zoned.
&1 - source variable
&2 - Number of Decimal Places
&3 - 'To'
&4 - Target Variable.
write &1 to w_zoned no-grouping decimals &2.
condense w_zoned.
Remove the Decimal Points.
search w_zoned for '...'.
while sy-subrc = 0.
move sy-fdpos to w_to_point.
if w_to_point = 0.
w_to_point = 1.
endif.
compute w_from_point = sy-fdpos + 1.
concatenate w_zoned+0(w_to_point)
w_zoned+w_from_point
into w_zoned.
search w_zoned for '...'.
endwhile.
shift w_zoned right deleting trailing space.
translate w_zoned using ' 0'.
call function 'Z_TRANSLATE_ZONED_DECIMALS'
exporting
i_input = w_zoned
importing
i_output = w_zoned
exceptions
x_invalid_zoned_char = c_invalid_zoned_char
x_numeric_info_lost = c_numeric_info_lost
others = c_other_zoned_error.
Get the length of the recipient field so we don't truncate the
numbers....
describe field &4 length w_flength in character mode.
describe field &4 type w_type.
describe field w_zoned length w_zoned_len in character mode.
if w_zoned_len <= w_flength.
move w_zoned to &4.
shift &4 right deleting trailing space.
translate &4 using ' 0'.
else.
Get the start position....
If it's a packed field allow for values up to 6 figures
compute w_zoned_len = w_zoned_len - w_flength.
if w_type = 'P'.
subtract 2 from w_zoned_len.
clear w_type.
endif.
move w_zoned+w_zoned_len &3 &4.
endif.
END-OF-DEFINITION. "Move_zoned
LOOP AT t_single_kunnr.
move_zoned t_single_kunnr-postamt 2
to t_single_kunnr-dmbtr.
DIVIDE t_single_kunnr-dmbtr BY 100.
MODIFY t_single_kunnr.
ENDLOOP.
Is there a solution to get past this syntax error as I would rather not change the datatype of the field in the structure.
Much Obliged
Elphick.Type X is not allowed in Unicode. When a field is declared as Type X with Value u201809u2019 or any other value, it can be resolved by using classes.
Before Unicode
CONSTANTS: c_hex TYPE x VALUE '09'.
Resolution:
Itu2019s work for any value of x.
First a temporary field of Type c should declare. Following class will convert Type x variable into type c.
Example:
CONSTANTS: c_hex TYPE x VALUE '09'.
DATA: LV_TEMP TYPE STRING.
DATA: LV_TMP TYPE C.
TRY.
CALL METHOD CL_ABAP_CONV_IN_CE=>UCCP
EXPORTING
UCCP = c_hex
RECEIVING
CHAR = LV_TMP .
CATCH CX_SY_CONVERSION_CODEPAGE.
CATCH CX_PARAMETER_INVALID_TYPE.
CATCH CX_SY_CODEPAGE_CONVERTER_INIT.
ENDTRY.
CONCATENATE I_OUTPUT-BKTXT I_OUTPUT-BVORG
I_OUTPUT-BUDAT I_OUTPUT-MESSAGE INTO
SEPARATED BY LV_TMP.
I_BUFFER = LV_TEMP.
CLEAR LV_TEMP.
CLEAR LV_TMP.
OR
Note: It works only for type x value 09.
CLASS cl_abap_char_utilities DEFINITION LOAD.
CONSTANTS: c_hex TYPE c VALUE
abap_char_utilities=>HORIZONTAL_TAB. -
SharePoint 2010 -
I have created a console utility that further calls the stsadm.exe to Export sites from one site collection in a DB to another site collection in another DB of the same web application.
Export works fine. But during Import, I get the following errors
[ListItem] [Admin] Progress: Importing
[ListItem] [Admin] Verbose: List URL: /pwa1/GTR/7 GTR Programme
[ListItem] [Hol plans.xls] Progress: Importing
[ListItem] [Hol plans.xls] Verbose: List URL: /pwa1/GTR/7 GTR Programme
[ListItem] [Time.doc] Progress: Importing
[ListItem] [Time.doc] Verbose: List URL: /pwa1/GTR/7 GTR Programme
[ListItem] [AP Docs] Progress: Importing
[ListItem] [AP Docs] Verbose: List URL: /pwa1/GTR/7 GTR Programme
[ListItem] [Update - June 27th.pdf] Progress: Importing
[ListItem] [Update - June 27th.pdf] Verbose: List URL: /pwa1/GTR/7 GTR Programme
[ListItem] [Update - June 27th.pdf] Error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
[ListItem] [Update - June 27th.pdf] Error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
[ListItem] [Update - June 27th.pdf] Error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
FatalError: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
Progress: Import did not complete.
1. Does the console application treated as a Sandbox Solution?
2. Do I need to configure CAS policy in wss_usercode.config? and what?
3. What else could be configured to make this work?
I have tried adding the following in wss_custom_minimaltrust.config but no avail.
<SecurityClass Name="SqlClientPermission" Description="System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
and
<PermissionSet
class="NamedPermissionSet"
version="1"
Name="SPRestricted">
<IPermission
class="SqlClientPermission"
version="1"
Unrestricted="true"
/>
<!-- Other IPermission -->
</PermissionSet>
UPDATE: It has been observed that the issue is intermittent. That is, sometimes the import works fine (event without any configuration of SqlClientPermission in any config file) but sometimes it gives the above error. I'm stuck!
Regards, Amit GuptaHi,
According to your post, my understanding is that you get Error “Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed
Simple solution is to change the trust the trust level to FULL: <trust level="[Full]" originUrl="URL" />
In addition, you can modify the wss_mediumtrust.config and wss_minimaltrust.config file under the path “C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\CONFIG”.
For more information, you can refer to:
http://blogs.msdn.com/b/navdeepm/archive/2010/02/19/system-security-securityexception-request-for-the-permission-of-type-system-data-sqlclient-sqlclientpermission-system-data-version-2-0-0-0-culture-neutral-publickeytoken-b77a5c561934e089-failed.aspx
http://www.fewlines4biju.com/2011/01/request-for-permission-of-type_18.html
http://techsolutions-at-desk.blogspot.com/2011/08/request-for-permission-of-type.html
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support -
Which type of data should I choose in transfering the R/3 table to Sap BI 7
Dear Experts,
I am transfering the one ABAP TABLE with all the fields from sap r/3 to sap Bi 7.0 system.
I went to sap r/3 system and by using SBIW I clicked on maintain generic data sources and I am in confusion , which type of data I should opt for transfering the R/3 table into BI system.
a) Transactional
b) Texts
c) attributes.
please explain me when to choose these 3 different options ?
waiting for a reply from you experts...
Thanks a lotThanks but I want to tranfer a Complete table with all the fields into sap BI system, so how can I proceed ,bcse may be the table contails all the types of data ie., master data attributes , texts and as well as transaction data,
I am in confusion ,please tell me the steps to transfer the table with all the fields( 72) in to sap system.
it would be helpful if you can spend some time for my question. -
As to the data type of the data type of the difference between two date type of datas
Hi,
I have a question about the data type of the difference between two date type of datas.
There are two date type of datas as:
SSHIPMENTS.RECEIVEDATETIME
SSHIPMENTS.PROMISEDATETIME
I try to use the following SQL Script in Oracle SQL*Plus as:
SELECT CASE
WHEN (SSHIPMENTS.RECEIVEDATETIME - SSHIPMENTS.PROMISEDATETIME) < '000 01:00:00.000' THEN 'OnTime'
WHEN (SSHIPMENTS.RECEIVEDATETIME - SSHIPMENTS.PROMISEDATETIME) < '000 01:30:00.000' THEN '60-89 Minutes'
ELSE '3+ Hours'
END
FROM SSHIPMENTS;
The error message of "Invalid Number" for the '000 01:30:00.000' happens.
I don't know if the data type of the interval is wrong.
Many Thanks,
CathySELECT CASE
WHEN (to_char(SSHIPMENTS.RECEIVEDATETIME,'hhmiss') - to_char(SSHIPMENTS.PROMISEDATETIME,'hh24miss')) < '010000' THEN 'OnTime'
WHEN (to_char(SSHIPMENTS.RECEIVEDATETIME,'hhmiss') - to_char(SSHIPMENTS.PROMISEDATETIME,'hh24miss'))< '000 01:30:00.000' THEN '60-89 Minutes'
ELSE '3+ Hours'
END
FROM SSHIPMENTS;
just try it out.. -
Hi Friends,
Request for the permission of type System.Data.SqlClient.SqlClientPermission System.Data Version 1.0.5000.0 Culture neutral .This error is recieving when ever i tried to use the sql connection (with Visual
studio C#) in sharepoint portal installed application.
Please help me if any answers for the issue.Hi,
Open wss_mediumtrust.config & wss_minimaltrust.config. SharePoint 2013(C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\config\).
Find in wss_mediumtrust.config:
<SecurityClass
Name="SqlClientPermission"
Description="System.Data.SqlClient.SqlClientPermis sion, System.Data,
Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
Copy and paste it in to the <SecurityClasses> node of wss_minimaltrust.config.
In the PermissionSet section of this configuration file, add the following:
Find in wss_mediumtrust.config:
<IPermission class="SqlClientPermission" version="1" Unrestricted="true"/>
Copy and paste it in to the a <PermissionSet> node of wss_minimaltrust.config.
Here is a similar thread for your reference:
https://social.msdn.microsoft.com/Forums/en-US/a1c8f2bf-2575-40b4-87f1-4f98462b3234/request-for-the-permission-of-type-systemdatasqlclientsqlclientpermission-systemdata-version?forum=tfssetup
Best Regards
Dennis Guo
TechNet Community Support -
i have only a single texbox.i want to display<big style="margin:0px;padding:0px;border:0px;color:#111111;font-family:'Segoe
UI', Arial, sans-serif;line-height:normal;"> names , date,priortiy </big>in the same textbox <big
style="margin:0px;padding:0px;border:0px;color:#111111;font-family:'Segoe UI', Arial, sans-serif;line-height:normal;">when i typed @ names should be display names</big> like
when u type comment in facebook for particular person it will display name. when i type ! date should be display and when i type * priority should be display in same textbox like
example <big style="margin:0px;padding:0px;border:0px;color:#111111;font-family:'Segoe UI', Arial, sans-serif;line-height:normal;">@
names !today date or tomorrow date etc * priority high,low ,medium etc</big>This is my first time posting here, so I'm sorry, I re-read my post several times and honestly did think I provided enough information, but you're right, it wasn't the right kind. So please (continue to) bear with me, I'm really not trying to be ignorant. I honestly assumed the issue was something I was doing wrong in Bridge, nothing to do with my computer specs.
I am using a late-2008 Macbook, running Yosemite 10.1.1 (screenshot below)
On the Mac I am using Bridge CC 6.1.1.115 and Photoshop CC 2014 (2014.2.1 release, 20141014.r.257 x64)
Here is a link to the System Info from Photoshop on the Mac
Here is a screenshot of my System Overview on the Mac
Here is a screenshot of my Photoshop performance preferences on the Mac
I am also using a Dell desktop with Windows 8, running Photoshop CC 2014 (2014.2.1 release, 20141014.r.257 x32) and Bridge CC 6.1.0.116 x32 (on a separate CC account with separate files that I don't try to sync or anything)
Here is a link to the System Info from Photoshop on the Windows computer.
Here is a screenshot of the system overview on the Windows
Here is a screenshot of my Photoshop Performance preferences on the Windows computer
I work with jpg, psd, ai, svg, and pdf files. Most of my stacks are three different file types of the same image, usually jpg, psd/ai, and pdf.
I have not recieved any error messages
I am not having issues opening raw files, I am not having printing issues, I have listed the troubleshooting steps I have taken.
Is there any information you need that I missed? I'm trying not to be a dingus, but I'll have to ask you to be patient with me in the meantime. I haven't ever looked up half the hardware/software details that were suggested and I don't know how to off the top of my head, so I provided what I already knew how to
Maybe you are looking for
-
How do you get your iMac to show video (or mirroring) with Apple Tv...please help!
I have searched this forum, read the articles here and on Google and I still can't figure this out. Perhaps what I'm wanting isn't possible. All I want to do is watch my CBS show from www.cbs.com on Apple Tv via my iMac. The Apple TV moniker is next
-
Can any one send me good material for MM workflow. I am looking for step by step procedure to workflow
-
Regarding using of EXTENSION1 and EXTENSION2 in BAPI_OUTB_DELIVERY_CHANGE
Hi, Can any one please help me how to code for zfields in EXTENSION1 and EXTENSION2 in BAPI_OUTB_DELIVERY_CHANGE Thanks, Nethaji.
-
Doubts : Regarding Transportation
Hi XI Gurus, I want to know more about Transportation mechamism of XI. As per my knowledge one is File system based(a lot of manual work ::( another one is CMS. 1. Pros and Cons of File System/CMS Transport ? 2. For Transporting IR and ID Objects abo
-
It won't let me use a panoramic picture as a live background
Why putting a panorama it asks me to move and scale and so doesn't spin when the I phone is moved