Fatal application error

Need help installing the trial version.
I get the error "This Application has unexpectedly quit invocation of this java application has caused an invocation target exception. This application will now exit (LAX)" when I try to install LCES4 Jboss.
Details are
ZeroGu2: Windows DLL failed to load
at ZeroGa2.b(DashoA10*..)
at ZeroGa2.b(DashoA10*..)
at com.zerog.ia.installer.LifeCycleManager.b(DashoA10*..)
at com.zerog.ia.installer.LifeCycleManager.a(DashoA10*..)
at com.zerog.ia.installer.Main.main(DashoA10*..)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.zerog.lax.LAX.launch(DashoA10*..)
at com.zerog.lax.LAX.main(DashoA10*..)"
Thanks in advance,
Sai

Just checking to see if you ever got this fixed..... I'm having the same problem.
Trying to install the 64 bit version does exactly what you describe above, doesn't get
past the InstallAnywhere screen. Interestingly, the 32 bit version installs fine, but the
configuration manager won't start up....it complains that I'm on a 64 bit machine....
Hopefully somebody at Adobe reads this forum once in a while.

Similar Messages

Rosetta Stone TOTALe (Spanish) 4.5.5 Fatal Application Error 1141 Installs But Won't Launch After MacBook Restarts

I have a MacBook Pro running OS X 10.9.4 (Maverick) and am trying to add Rosetta Stone Latin Am Spanish to this laptop, after having successfully installed it several years ago on a older MBP.
I was given the latest download file TOTALe 4.5.5 by Rosetta Stone Support for this purpose. It will install fine and work, immediately upon installation, but when I shut down and restart, I can no longer launch the program and get the Fatal Application Error 1141 code instead.
I have been through this issue many, many times with Rosetta Stone Support already and have followed, alone and with them, the troubleshooting link set up for this problem without success. (Here is the link: https://rosettastone.secure.force.com/en/language-learning/articles/Error-1141-a ppears-when-I-start-the-Rosetta-Stone-TOTALe-application#macdiv) Rosetta Stone has run out of ideas to resolve this issue. (I have saved about 10 chat session transcripts where the support people have me run through the same steps over and over, despite my informing them of the previous lack of success in following these steps.)
My OS X is up to date. I am wondering if anyone else has experienced this problem running Maverick.
Any thoughts would be greatly appreciated.
P.S. This is a relatively new MBP and the only add-on software other than Rosetta Stone is Microsoft Office.

I have the same problem. Back in 2011 I bought Rosetta and got the very same problem, talked and talked to their support to no avail. On that instance they returned my purchase money. This time around I asked beforehand if the software was totally compatible with Yosemite and they said yes. I just got it, tried to unit and got error 1141 again. It is very frustrating! I will talk to them again but my hopes are very low. I guess one needs to understand that the software is crap!

Rosetta Stone: 'Fatal Application Error #1141'

Hi,
I am running Lion 10.7.4, and when I installed my Rosetta Stone V4.1.10 I was given the error code in the title. After a long, long time trying to figure out how to resolve this I still cannot. I have contacted Rosetta Support, checked my Date and Time, downloaded updae v4.1.15, downloaded Adobe Air, uninstalled and reinstalled and restarted MBP numerous times and nothing is working.
I believe the problem is there is no Rosetta Stone Daemon file on my MBP after installing Rosetta, however I have already tryed to install this and it still isn't working. Please don't refer me to Rosetta Stone support, they are clueless at the best of times.
Any help is much appreciated.

I solved it. I just upgraded to Mountain Lion for free with the Apple Upgrade program. It's sad that this seemed the only way to fix it but that's just the way some things turn out. I had been on the phone with a Rosetta stone agent for 2 hours, which including them remotely accessing my MBP, but even they were stuck.
I hope you never have the problems I have faced over the past two days.

CF11 is crashing ( application pool suffered a fatal communication error with the Windows Process Activation Service)

I have a cluster of 2 IIS web servers on Windows Server 2008 R2. They had been running on CF10 for over a year (if not two) with no problems. I upgraded one server to CF11 and now that server is crashing while the CF10 servers is still running fine.
In the Windows event log I'm seeing 4 instances of this error:
"A process serving application pool '******' suffered a fatal communication error with the Windows Process Activation Service. The process id was '4652'. The data field contains the error number."
Then finally:
"Application pool '******' is being automatically disabled due to a series of failures in the process(es) serving that application pool.".
Looking at the application pool in the IIS admin it is stopped. Restarting will resolve but it will eventually crash.
What could be the issue?
-Phil

I'm seeing in the CF logs leading up to the crash:
Jun 04, 2014 11:11:31 AM org.apache.coyote.ajp.AjpProcessor getRealPathFromServer
SEVERE: Error in getRealPathFromConn
java.net.SocketException: Connection reset by peer: socket write error
at java.net.SocketOutputStream.socketWrite0(Native Method)
at java.net.SocketOutputStream.socketWrite(Unknown Source)
at java.net.SocketOutputStream.write(Unknown Source)
at org.apache.coyote.ajp.AjpProcessor.getRealPathFromServer(AjpProcessor.java:402)
at org.apache.coyote.ajp.AbstractAjpProcessor.getRealPath(AbstractAjpProcessor.java:1276)
at org.apache.naming.resources.FileDirContext.doGetRealPath(FileDirContext.java:202)
at org.apache.naming.resources.BaseDirContext.getRealPath(BaseDirContext.java:424)
at org.apache.catalina.core.StandardContext.getRealPath(StandardContext.java:4660)
at org.apache.catalina.core.ApplicationContext.getRealPath(ApplicationContext.java:432)
at org.apache.catalina.core.ApplicationContextFacade.getRealPath(ApplicationContextFacade.ja va:333)
at coldfusion.runtime.ServletContextWrapper.doGetRealPath(ServletContextWrapper.java:184)
at coldfusion.runtime.ServletContextWrapper._doGetRealPath(ServletContextWrapper.java:116)
at coldfusion.runtime.ServletContextWrapper.getRealPath(ServletContextWrapper.java:98)
at coldfusion.filter.FusionContext.getRealPath(FusionContext.java:999)
at coldfusion.filter.FusionContext.getRealPath(FusionContext.java:937)
at coldfusion.runtime.RuntimeServiceImpl.resolveTemplatePath(RuntimeServiceImpl.java:866)
at coldfusion.tagext.lang.IncludeTag.setTemplate(IncludeTag.java:420)
at cfApplication2ecfc1835967654.runPage(C:\Data\http\domain\apps\Application.cfc:3)
at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:246)
at coldfusion.filter.SilentFilter.invoke(SilentFilter.java:47)
at coldfusion.runtime.TemplateProxyFactory.resolveComponentHelper(TemplateProxyFactory.java: 538)
at coldfusion.runtime.TemplateProxyFactory.resolveName(TemplateProxyFactory.java:248)
at coldfusion.runtime.TemplateProxyFactory.resolveName(TemplateProxyFactory.java:159)
at coldfusion.runtime.TemplateProxyFactory.resolveFile(TemplateProxyFactory.java:120)
at coldfusion.cfc.CFCProxy.<init>(CFCProxy.java:138)
at coldfusion.cfc.CFCProxy.<init>(CFCProxy.java:84)
at coldfusion.runtime.AppEventInvoker.<init>(AppEventInvoker.java:64)
at coldfusion.filter.PathFilter.resolveApplicationScope(PathFilter.java:195)
at coldfusion.filter.PathFilter.invoke(PathFilter.java:124)
at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:94)
at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:58)
at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:62)
at coldfusion.CfmServlet.service(CfmServlet.java:219)
at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:303)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208)
at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 )
at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:241)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208)
at sun.reflect.GeneratedMethodAccessor118.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.intergral.fusionreactor.j2ee.filterchain.WrappedFilterChain.doFilter(WrappedFilterCha in.java:97)
at com.intergral.fusionreactor.j2ee.filter.FusionReactorRequestHandler.doNext(FusionReactorR equestHandler.java:472)
at com.intergral.fusionreactor.j2ee.filter.FusionReactorRequestHandler.doHttpServletRequest( FusionReactorRequestHandler.java:312)
at com.intergral.fusionreactor.j2ee.filter.FusionReactorRequestHandler.doFusionRequest(Fusio nReactorRequestHandler.java:192)
at com.intergral.fusionreactor.j2ee.filter.FusionReactorRequestHandler.handle(FusionReactorR equestHandler.java:507)
at com.intergral.fusionreactor.j2ee.filter.FusionReactorCoreFilter.doFilter(FusionReactorCor eFilter.java:36)
at sun.reflect.GeneratedMethodAccessor117.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.intergral.fusionreactor.j2ee.filterchain.WrappedFilterChain.doFilter(WrappedFilterCha in.java:79)
at sun.reflect.GeneratedMethodAccessor116.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.intergral.fusionreactor.agent.filter.FusionReactorStaticFilter.doFilter(FusionReactor StaticFilter.java:53)
at com.intergral.fusionreactor.agent.pointcuts.NewFilterChainPointCut$1.invoke(NewFilterChai nPointCut.java:41)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:220)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:122)
at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:501)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:98)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:116)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:422)
at org.apache.coyote.ajp.AjpProcessor.process(AjpProcessor.java:198)
at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.jav a:607)
at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:313)
at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)

Sharepoint application pool suffered a fatal communication error with the Windows Process Activation Service

I am using form based Sharepoint servers and received below error. Is there any way to solve this?
Sharepoint 2010 in Windows 2008 R2 Server.
A process serving application pool 'Sharepoint-2' suffered a fatal communication error with the Windows Process Activation Service. The process id was '11516'. The data field contains the error number.

I don't see any number provided in the event log. I got this through Sharepoint diagnostic tool. below is the log.
Log Name: System
Source: Microsoft-Windows-WAS
Date: 12/17/2013 5:16:34 AM
Event ID: 5011
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: 525531-WEB03.dfw.intensive.int
Description:
A process serving application pool 'Sharepoint-2' suffered a fatal communication error with the Windows Process Activation Service. The process id was '8180'. The data field contains the error number.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-WAS" Guid="{524B5D04-133C-4A62-8362-64E8EDB9CE40}" EventSourceName="WAS" />
<EventID Qualifiers="32768">5011</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-12-17T10:16:34.000000000Z" />
<EventRecordID>23515</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>525531-WEB03.dfw.intensive.int</Computer>
<Security />
</System>
<EventData>
<Data Name="AppPoolID">Sharepoint-2</Data>
<Data Name="ProcessID">8180</Data>
<Binary>6D000780</Binary>
</EventData>
</Event>

Berkeley db fatal region error detected run recovery

Hi,
I have initiated d Berkeley DB object.
Then, I am using multithreading to put data into the DB.
Here is how I open the one data handler.
ret = dbp->open(dbp, /* Pointer to the database */
NULL, /* Txn pointer */
db_file_name, /* File name */
db_logical_name , /* Logical db name (unneeded) */
DB_BTREE, /* Database type (using btree) */
DB_CREATE, /* Open flags */
0644); /* File mode. Using defaults */
each threads would put data into the same handler when it needs to.
I am getting "berkeley db fatal region error detected run recovery".
What is the problem? Does it have anything to do with the way the handler is created or whether multiple threads can put data into the DB?
jb

Hi jb,
user8712854 wrote:
I am getting "berkeley db fatal region error detected run recovery".This is a generic Berkeley DB panic message that means something went wrong. When do you get this error? Did you enable the verbose error messages? Are there any other warning/error messages reported? By just posting the way you open the database doesn't help much at all. I reviewed the other questions you asked on the forum, and it seems that you are not following the advices and consult the documentation, but you prefer to open new threads. I advice you to first work on configuring Berkeley DB for your needs and read the following pages in order to understand which Berkeley DB Product best suits your application and how it should be configured for a multithreaded application:
[The Berkeley DB products|http://www.oracle.com/technology/documentation/berkeley-db/db/ref/intro/products.html]
[Concurrent Data Store introduction|http://www.oracle.com/technology/documentation/berkeley-db/db/ref/cam/intro.html]
[Multithreaded applications|http://www.oracle.com/technology/documentation/berkeley-db/db/ref/program/mt.html]
[Berkeley DB handles|http://www.oracle.com/technology/documentation/berkeley-db/db/ref/program/scope.html]
On the other hand, if the code that's calling the Berkeley DB APIs is not too big and is not private, you can post it here so we can review it for you and let you know what's wrong with it.
The procedures you should follow in order to fix a "run recovery" error are described here:
[Recovery procedures|http://www.oracle.com/technology/documentation/berkeley-db/db/ref/transapp/recovery.html]
Thanks,
Bogdan Coman

Adcfgclone.pl errored out with Unzip FAC-50409: Exiting, fatal unzip error

Hi,
while i am doing application cloning i got the following error message:
Beginning application tier Apply - Thu Jul 7 17:03:07 2011
Log file located at /u02/appl/appltest/preprod/prodappl/admin/preprod_cjb112vsa400/log/ApplyAppsTier_07071703.log
| 66% completed Unzip Failed:
/ 66% completed AC-50409: Exiting, fatal unzip error; /u02/appl/appltest/preprod/prodcomn/clone/bin/../appl/AT_inderpdbs/stage/java0.zip failed
ERROR while running Apply...
ERROR: Failed to execute /u02/appl/appltest/preprod/prodcomn/clone/bin/adclone.pl
my zip version is 2.31 and OS is RHEL 5.5 but souse OS is on RHEL3
Please suggest how to resolve this one.

What is the application release?
| 66% completed Unzip Failed:
/ 66% completed AC-50409: Exiting, fatal unzip error; /u02/appl/appltest/preprod/prodcomn/clone/bin/../appl/AT_inderpdbs/stage/java0.zip failedCan you find this zip file (java0.zip)? If yes, can you unzip it manually?
Thanks,
Hussein

Ld.so.1 problem - fatal: relocation error - "referenced symbol not found"

Hi, I've been trying to compile and run my application non Solaris using CC (detils below) but haven't got luck with running the application because of a linker error :
ld.so.1: java: fatal: relocation error: file ./libtest.so: symbol __1cDstdMbasic_string4Ccn0ALchar_traits4Cc__n0AJallocator4Cc___J__nullref_: referenced symbol not found
Here's what I'm trying to do :
I'm compieing one library to include another shared library whcih uses the "string" class (STL). The compilation of both the libraries proceeds perfectly fine. However, when i preload this library with LD_PRELOAD and run a JAVA application (which will have calls to some function in the preloaded library), the get the above linker error.
Here's what all I have tries to get thsi wroking : ( I understand that this error is due to a missing library that CC has not linked to and i've no idea what the library is!!!)
1.> # LD_LIBRARY_PATH=/usr/lib:$LD_LIBRARY_PATH
# export LD_LIBRARY_PATH - NO LUCK :-(
2.> linked to /opt/SUNWspro/lib/libCrun.so (found this from another forum on the net), but NO LUCK :-(
3.> export LD_DEBUG=bindings
export LD_DEBUG_OUTPUT=/home/log.txt (so that all sysmbols refered are logged!!!)
i did a grep on the log for the symbol but NO LUCK!!! :-(
Please can you help me with this? What is the library that is to be linked too, or is there something else?
Details About my system, compiler and compilation options :
1.> uname -a output : SunOS sh1sol9 5.9 Generic_117171-12 sun4u sparc SUNW,Sun-Fire-280R Solaris
2.> CC version : Sun WorkShop 6 update 2 C++ 5.3
3.> Compilation flags i've used to build the library :
FIRST LIBRARY : CC -G -xcode=pic32 -I../common/ -ldl ../common/logger.cpp helper_functions.cpp BCPEntries.cpp BCP_class.cpp -o libBCP.so
SECOND LIBRARY : CC -G -xcode=pic32 -I../common/ test_BCP_construct.cpp -lBCP -L. -o libtest.so
Please help me out of this,
Any and every help (or even a hint to it) will be appreciated!!!
Thanks in advance,
Madhur Kumar Tanwani

Refer to the C++ Users Guide that comes with the compiler, the chapter on Building Libraries, which explains these points in more detail.
When you build a C++ shared library, you must explicitly list all the libraries that it depends on. Unlike building an executable, the CC -G command does not by default create dependencies on system libraries. Although not explained well in the Guide, you should be sure you get the shared (.so) versions of all libraries, not the static (.a) versions.
All C++ programs require at least libCrun and libc. Programs that use the C++ Standard library (using anything in the std namespace, like std::string) also need to link to the appropriate version of the library.
The default library is libCstd. If you compile using the optional STLport library, you need the libstlport instead. You cannot use both libCstd and libstlport in the same program.
In your case, the build command would look something like this, assuming you are using the default libCstd:
CC -G -o mylib.so ..... -library=Cstd,Crun -lc
Be sure that any preceeding -Bstaic option is followed by -Bdynamic before listing these system libraries.
To verify you have picked up the dynamic libraries, run the command
ldd mylib.so
to see a list of dependencies. If you don't see the following in the list
/usr/lib/libCstd
/usr/lib/libCrun
/usr/lib/libc (or /lib/libc)
something is wrong.
A note about LD_LIBRARY_PATH: don't use it.
Ideally, the environment variable should never be set. If you must set it to reach vendor-supplied libraries, never put the system directories /lib or /usr/lib on the path, and never put the compiler installation directory, like /opt/SUNWspro/... on the path. You can wind up forcing the runtime loader to seach directories in the wrong order and pick up inappropriate versions of libraries.
For more on LD_LIBRARY_PATH, read this note in Rod Evans' blog. He's the Sun linker expert. The material here is available in the manuals, but his blog has a nice summary.
http://blogs.sun.com/roller/page/rie/?anchor=tt_ld_library_path_tt

Receive "Fatal Internal Error: Linker.cpp, line 1926 when run executable.

Hi, I use invoke node to call multiple subvi.vit, it work fine under .vi but when run under an executable I receive this error:
Fatal Internal Error: 'linker.cpp", line 1926
LabVIEW Version 7.0 You will lose any unsaved work. For more assistance in resolving this problem, please relaunch LabVIEW, or contact National Instruments.
Any suggestion will be very appreciated

Hi David,
What you are seeing is a known issue when calling LabVIEW 7.0 VITs from
an executable or DLL if the VITs include any Express VIs. It can happen if you
try to load
multiple instances of that template VI using VI Server.
There are a couple of workarounds for this issue:
Take
all the express VIs that are inside the template VI and turn them into
static subVIs. You can do this by right-clicking on the express VI and
selecting "Open Front Panel"; then save the express VI as a normal
subVI.
Build the entire application into a single executable, which will force all of the express VIs to get compiled as static subVIs.
Don't use the runtime engine at all and always run your application in development mode.
Let me know if the workarounds fix your issue, thanks.
Good luck!
- Philip Courtois, Thinkbot Solutions

Fatal Internal Error : "OMUDClassMgr.cpp". Line 1128

I received the following message:
Fatal Internal Error : "OMUDClassMgr.cpp", 1128
LabVIEW version 8.2.1
I was trying to build an application using the application builder.
Has anyone else had this issue? What needs to be done to fix this.

Hello,
This was reported to R&D (#4ALB7O89) for further investigation. Are you able to reproduce this problem with the same VI? Are you able to build an application with a simple VI?
Regards,
Elizabeth S.
Applications Engineer
National Instruments

Fatal Syntax Errors Unique to XCode Compile

I am attempting to bring a Unix library into an XCode project for iPad and compile it. This Unix library compiles for i386 without any problems when I use gcc from Terminal, which is v4.2. However, when I attempt to compile those same sources from within the XCode project, I receive hundreds of fatal syntax errors, even though I it is still compiling to i386, and it is still using GCC 4.2. Here is an example declaration where it gives an error:
The Code:
int memcmp(const void *, const void *, size_t);
The error:
Expected declaration specifiers or '...' before '(' token
I must admit I am just now reading my introduction to Objective-C, so it is possible that there is a syntax error there according to some strict guidelines. The above code is actually C, but I did not worry about this because I was not expecting to extensively modify this library.
How is the XCode compile so different from using Apple's built-in GCC 4.2 that I receive hundreds of fatal syntax errors from within XCode, but it compiles with only a few warnings from the command line?

kienjakenobi wrote:
At the moment, I am having difficulty compiling libpng. libpng does not appear to like Apple's custom stdio.h header file.
What errors are you getting? I'm pretty sure I've build this library before, although not for iOS. Building for iOS shouldn't be much different than any cross-platform build, such as when building 32-bit on a 64-bit machine.
I tried it myself and couldn't get the configure script to do it all. Those things never work when you need them to. I had to hack up the Makefile and libtool file. Here is a patch file:
diff -crB libpng-1.2.44/Makefile libpng-1.2.44.iOS/Makefile
* libpng-1.2.44/Makefile 2010-10-14 14:57:16.000000000 -0400
--- libpng-1.2.44.iOS/Makefile 2010-10-14 14:50:06.000000000 -0400
* 171,180 **
AUTOHEADER = ${SHELL} /Users/jdaniel/Downloads/libpng-1.2.44/missing --run autoheader
AUTOMAKE = ${SHELL} /Users/jdaniel/Downloads/libpng-1.2.44/missing --run automake-1.11
AWK = awk
! CC = gcc
CCDEPMODE = depmode=gcc3
! CFLAGS = -g -O2
! CPP = gcc -E
CPPFLAGS =
CYGPATH_W = echo
DEFS = -DHAVECONFIGH
--- 171,180 ----
AUTOHEADER = ${SHELL} /Users/jdaniel/Downloads/libpng-1.2.44/missing --run autoheader
AUTOMAKE = ${SHELL} /Users/jdaniel/Downloads/libpng-1.2.44/missing --run automake-1.11
AWK = awk
! CC = /Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/gcc
CCDEPMODE = depmode=gcc3
! CFLAGS = -g -O2 -isysroot /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.2.sdk -arch armv7
! CPP = /Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/cpp -E
CPPFLAGS =
CYGPATH_W = echo
DEFS = -DHAVECONFIGH
* 194,200 **
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALLSTRIPPROGRAM = $(install_sh) -c -s
! LD = /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld
LDFLAGS =
LIBOBJS =
LIBPNG_DEFINES = -DPNGCONFIGURELIBPNG
--- 194,200 ----
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALLSTRIPPROGRAM = $(install_sh) -c -s
! LD = /Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/ld
LDFLAGS =
LIBOBJS =
LIBPNG_DEFINES = -DPNGCONFIGURELIBPNG
diff -crB libpng-1.2.44/config.log libpng-1.2.44.iOS/config.log
* libpng-1.2.44/config.log 2010-10-14 14:57:16.000000000 -0400
--- libpng-1.2.44.iOS/config.log 2010-10-14 14:48:08.000000000 -0400
* 30,37 **
Processor type: i486 (Intel 80486)
Processors active: 0 1
Primary memory available: 4.00 gigabytes
! Default processor set: 90 tasks, 370 threads, 2 processors
! Load average: 0.28, Mach factor: 1.71
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
--- 30,37 ----
Processor type: i486 (Intel 80486)
Processors active: 0 1
Primary memory available: 4.00 gigabytes
! Default processor set: 90 tasks, 374 threads, 2 processors
! Load average: 0.38, Mach factor: 1.60
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
diff -crB libpng-1.2.44/libtool libpng-1.2.44.iOS/libtool
* libpng-1.2.44/libtool 2010-10-14 14:57:16.000000000 -0400
--- libpng-1.2.44.iOS/libtool 2010-10-14 14:55:40.000000000 -0400
* 240,249 **
hardcodeintolibs=no
# Compile-time system search path for libraries.
! syslib_search_path_spec="/usr/lib/gcc/i686-apple-darwin10/4.2.1/x8664 /usr/lib/i686-apple-darwin10/4.2.1 /usr/lib /usr/local/lib"
# Run-time system search path for libraries.
! syslib_dlsearch_pathspec="/usr/local/lib /lib /usr/lib"
# Whether dlopen is supported.
dlopen_support=unknown
--- 240,249 ----
hardcodeintolibs=no
# Compile-time system search path for libraries.
! syslib_search_pathspec="/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.2.sdk/usr/lib"
# Run-time system search path for libraries.
! syslib_dlsearch_pathspec="/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.2.sdk/usr/lib"
# Whether dlopen is supported.
dlopen_support=unknown
* 260,272 **
# The linker used to build libraries.
! LD="/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld"
# Commands used to build an old-style archive.
oldarchivecmds="$AR $AR_FLAGS $oldlib$oldobjs~$RANLIB $oldlib"
# A language specific compiler.
! CC="gcc"
# Is the compiler the GNU compiler?
with_gcc=yes
--- 260,272 ----
# The linker used to build libraries.
! LD="/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/ld"
# Commands used to build an old-style archive.
oldarchivecmds="$AR $AR_FLAGS $oldlib$oldobjs~$RANLIB $oldlib"
# A language specific compiler.
! CC="/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/gcc"
# Is the compiler the GNU compiler?
with_gcc=yes
It seems to work:
file ./.libs/libpng12.0.dylib
./.libs/libpng12.0.dylib: Mach-O dynamically linked shared library arm
You don't need to create static libraries. Just use the "installnametool" to change the location of the dynamic libraries to @executable_path and include the required libraries inside your application bundle.

Fatal Communication Error

Hello, everyone.
I am fairly new to the world of SQL server, so I apologize for any newbie errors in my question. I am also not sure if this is an SQL, IIS, or Windows Server issue.
The Environment:
One physical server running Hyper-V
Physical server is acting as domain controller, Hyper-v host and DNS server
All servers are part of the same domain.
Server version is 2012 R2 in all instances.
SQL version is 2014 in all instances.
.NET version is 4.5
All software is fully updated.
The Virtual Servers:
SQL Server
IIS Web Server
Test Server with IIS and SQL
The Problem:
The IIS Web Server cannot connect to the SQL Server without the application pool crashing.
The SQL Server logs show the login from the web server was successful.
The web server’s event logs show a “fatal communication error with the Windows Process Activation service.”
Other Facts:
When the IIS server and SQL server are on the same “machine” (the test server mentioned above) there are no issues at all – everything runs normally.
The website code is identical in both cases, as is the SQL configuration, including users and permissions.
If the connection on the test (previously working) is changed to connect to the standalone SQL server, the problem triggers, the app pool crashes, and the error message in the event log is the same as in the standalone web server.
For testing, the firewalls have been turned off on all servers and it makes no difference.
Windows authentication and SQL authentication both have the same results.
Using a standalone UDL file, a connection CAN be made to the SQL server from any other server, including the IIS Web Server where the app. pool crashes.
I realize I am no providing actual examples, but based on the information above, I am hoping to get some direction on where to look for a problem. Most of the information I have found on the error deals with Sharepoint, which is not a variable in my case.
Since the firewalls have been turned off, the problem only happens when attempting to connect to SQL from an outside server, and only happens through IIS, I am at a loss on what else to check.
Thank you in advance for any relevant advice.

Hello,
By your description, it sounds like an issue with the IIS server. The fact you can connect to SQL Server using all methods except through IIS (where it crashes) means that connectivity is good and SQL Server isn't throwing any errors. My other thought is
that there may be an issue with DNS and the way you have the virtual switches configured with the host.
Unfortunately I don't know all that much about IIS or Hyper-V specific host configurations for something such as this. Someone here may be able to help you further, or it could be moved the IIS/Hyper-V specific forums. I'd be willing to continue to help
out from the SQL Server side if that was to become the case.
Sean Gallardy | Blog |
Twitter

Db_verify: PANIC: fatal region error detected; run recovery

We have an application that is using bdb. On one of the instances it frequently hits a panic condition. db_verify reports the following:
# db_verify -o file.db
db_verify: PANIC: fatal region error detected; run recovery
db_verify -VSleepycat Software: Berkeley DB 4.3.29: (June 16, 2006)
Quitting the application and removing the __db.001 file will allow a clean restart. How do I debug where this problem might be coming from?
thanks,
kevin

Hi Kevin,
user11964780 wrote:
# db_verify -o file.db
db_verify: PANIC: fatal region error detected; run recoveryThis is a generic error message that means the region files are corrupted. This is most often a problem in the application.
user11964780 wrote:
How do I debug where this problem might be coming from?Reference Guide - Chapter 24: [ Debugging Applications|http://www.oracle.com/technology/documentation/berkeley-db/db/programmer_reference/debug.html]
Bogdan Coman

How can I localize the alert "error: PANIC: fatal region error detected..."

My application may corrupt and the operations therefore may fail and post the alert "error: PANIC: fatal region error detected; run recovery ...", and this alert is directly printed in the main process's window.
My question is how can I do to localize this alert in my thread which just deals with the Berkeley DB database?
Thanks

Hi,
You can configure an error callback function. See the run-time error configuration section of the Reference Guide here:
http://www.oracle.com/technology/documentation/berkeley-db/db/ref/debug/runtime.html
It sounds like DB_ENV->set_errcall is what you want:
http://www.oracle.com/technology/documentation/berkeley-db/db/api_c/env_set_errcall.html
Regards,
Alex Gorrod, Oracle

Problem sqlite+berkeley PANIC: fatal region error detected.

Excuse for my English and if this wrong place to explain the problem
I'm checking to replace Berkeley DB and SQLite for testing the stability against involuntary interruptions of program I have encountered the following error:
Berkeley DB trust in knowing his rnedimiento and stability with Subversion, but I doubt the API bridge SQLITE
I'm testing the Berkeley DB database using the API Berkeley DB SQLITE and I did a small test program:;
/* Open database. */
sqlite3 *db;
sqlite3_open("data/basedatos.db", &db);
sqlite3_exec(db,"CREATE TABLE [test] ([key] INTEGER, [dat] varchar(64), PRIMARY KEY ([key]))",NULL,0,NULL);
err_code = SQLITE_BUSY;
while (err_code != SQLITE_OK ) {
     sqlite3_exec( db, "delete from test", NULL, 0, NULL );
     err_code = sqlite3_errcode( db );
sqlite3_exec( db, "BEGIN", NULL, 0, NULL );+
for( int i=0; i<_numCartones; i++ ) {
     char buf[1024];
     sprintf_s( buf, sizeof(buf), "insert into test( key, dat) values ( %d, 'test%d' )", i, i );
     sqlite3_exec( db, buf, NULL, 0, NULL );
sqlite3_exec( db, "COMMIT", NULL, 0, NULL );
sqlite3_close(db);I launched the program and insert about 150000 records in 17 seconds. Perfect!
I created a file basedatos.db and basedatos.db-journal subdirectory with files: log.0000000016, __db.001, __db.002, __db.003, __db.004, __db.005, __db.006 and __db.register.
Open it and prove the usefulness dbsql
c: dbsql basedatos.db
select count(*) from test;
150000          ← Ok.
Without closing the program again dbsql run the test program and this will get stuck in the call:
sqlite3_exec( db, "delete from test", NULL, 0, NULL );I close dbsql and automatically releases the "delete from" and the test program again inserted 150,000 records
While this by inserting 150,000 records run it again
c: dbsql basedatos.db
select count(*) from test; [WAIT]
and select count (*) remains locked until you finish the test program, normal thing locks.Once you finish the select TEST responds to 150,000
150000          ← Ok.Without closing the program again dbsql run the test program and this will get stuck in the call:
sqlite3_exec( db, "delete from test", NULL, 0, NULL );I close dbsql and automatically releases the "delete from" and the test program again inserted 150,000 records
while inserting test rerun:
c: dbsql basedatos.db
select count(*) from test;
Error: database disk image is malformed
and in my test program : PANIC: fatal region error detected; run recovery.
Reviewing the files are only: badatos.db, log.0000000031, log.0000000032, log.0000000033, log.0000000034, log.0000000035, log.0000000036, __db.register.
and __db*.* files?

Had accidentally opened the program dbsql.exe while doing speed tests data insertion.
While in a shell to make a select count (*) and I realized that was blocked waiting for the COMMIT release, normal thing in a process BEGIN / COMMIT.
In one test was corrupt database which reduced the test software and simplify the test to repeat the problem.
Today I repeated the test and the situation has changed
1) Run test (all OK, inserted in 18 seconds 150000 entries)
2) DBSQL run and I make a select count (*) (All Ok)
3) DBSQL unsealed test run and stay lock on DELETE FROM
4) DELETE FROM I close DBSQL and not released as yesterday.Repeat several times and I have the same behavior
Move in the test code from "delete from..." begin and commit
sqlite3_exec( db, "BEGIN", NULL, 0, NULL );
err_code = sqlite3_errcode( db );
err_code = SQLITE_BUSY;
while (err_code != SQLITE_OK ) {
sqlite3_exec( db, "delete from test", NULL, 0, NULL );
err_code = sqlite3_errcode( db );
for( int i=0; i<_numCartones; i++ ) {Repeat tests
1)Test run, everything ok in 25 seconds. While inserting test this, I run realizao dbsql and a select count (*) and remains lock until test ends. Everything ok, 150000 records
2)Dbsql unsealed test run it again and stay lock on delete until you close the program dbsql.
3)I close dbsql and releasing the lock of seconds to delete the test the error "PANIC ..." like yesterdayRepeat several times and the behavior is the same, except that no desparencen db files.
If I can not run dbsql test run multiple times without problems.
Could be the problem dbsql and simultaneous access to the database?
I'm going to migrate an application in production since SQLITE to Berkeley DB for testing.
I have confidence in the performance of Berkeley DB and I know the proper functioning it does with subversion, but the subversion server on a server is protected with uninterrupted power.
If I avoid using dbsql while the test software that I have that theoretical security operation will be correct when using Berkeley DB SQLITE layer and especially with unexpected off the machine?
Thanks again for your help

Fatal application error

Similar Messages

Maybe you are looking for