Fatal error in iropt: Status 139

Sun1 Studio 7 compiler collection cannot compile the xine-library (xine.sf.org, xine-lib-1-beta4) because iropt exits with a fatal error.
The source-file in question is xine-lib-1-beta4/src/libfaad/output.c and the message produced is:
cc -DHAVE_CONFIG_H -I. -I. -I../.. -I../.. -I../../include -I../../include -I../../src -I../../src/xine-engine -I../../src/xine-engine -I../../src/xine-utils -fast -D_REENTRANT -D_FILE_OFFSET_BITS=64 -DXINE_COMPILE -xO5 -xarch=v8plusa -xchip=ultra2 -xCC -c output.c -KPIC -DPIC
cc: Fatal error in /opt/SUNWspro/bin/../prod/bin/iropt
Status 139
cc: iropt failed for output.c
Does this imply a bug in the optimizer?
Neither SunSolve nor Google are of much help on this one. I have all the patches for F7 as listed on access1 installed, including 111704-06.
Any hints much appreciated.
Regards, Paul Boven.

This problem doesn't appear in the early access 2 compiler ...
cc -v -xdepend -c output.c -xO5 -V
cc: Sun C 5.5 DEV 2003/02/02
acomp: Sun C 5.5 DEV 2003/02/02
iropt: Sun Compiler Common 7.1 DEV 2003/02/02
cg: Sun Compiler Common 7.1 DEV 2003/02/02
Also, if you turn off the dependency checking (-xdepend=no) then the fd7 compiler will also compile this routine.

Similar Messages

Bug: Fatal error in iropt

Hi,
While compiling our code Octopus, I found a bug in the sun studio express fortran compiler (in x86 linux and sparc solaris). I made a bug report, but in that moment I wasn't able to reduce the file to a single file and in the bug report and I gave a pointer to our svn repository.
Now I was able to reduce the bug to a single subroutine and I would like to modify the report, but I couldn't find how to do it. My Review ID is 944794. Shall I submit a new bug report? As I will commit a workaround, my report will not be valid.
In any case I post here the code that triggers the bug, it appears when optimizations level is 3 or greater. The error is:
iropt: ../src/sr.c:8153: af_create_ir_node: Assertion `af->type == AF_NODE' failed.
f95: Fatal error in iropt: Aborted
subroutine sub(domain)
implicit none
integer :: no_f, i, last, grouplength, ii, domain
integer, parameter :: filter_freq = 1
grouplength = 0
i = 1
no_f = 10
do ii = 1, no_f
    if(domain .eq. filter_freq) then
      grouplength = grouplength + 1
    end if
    last = i + grouplength
end do
print*, last
end subroutine subRemoving the 'last = ...' statement of the loop or removing the 'print*... ' sentence the bug dissapears.
By the way, I am quite impressed with the perfomance of the sun studio compiler. I made some preliminary tests in x86 and for our code it seems to be faster than any other compiler.

Hi,
I get the problem in these two versions:
*i386 Linux:
uname -a: Linux ddraig 2.6.16.20 #1 PREEMPT Sat Jun 17 01:39:04 CEST 2006 i686 GNU/Linux
f95 -V: f95: Sun Fortran 95 8.3 Linux_i386 Build40_1 2007/02/09
f95: Sun Fortran 95 8.3 Linux_i386 Build40_1 2007/02/09
* Sparc Solaris:
uname -a: SunOS swsa00 5.9 Generic_117171-17 sun4u sparc SUNW,Netra-T12 Solaris
f95 -V: f95: Sun Fortran 95 8.3 SunOS_sparc Build40_1 2007/02/08
Please note that the bug only appears when -O3 or greater optimization is used.

CC: Fatal error in iropt: Bus Error (core dumped)

Hi,
I am now using the following version of CC
CC: Sun C++ 5.7 Patch 117830-07 2006/03/15
however, sometimes(esp when I have another background process running), when I try to compile, I get the Error:
CC: Fatal error in iropt: Bus Error (core dumped)
Can anyone tell me the possible cause? Thank you very much.
Current directory is /cchk026/home2/cefbuild/emds-ha-sol8-103/vap_pack/isvapconnect9
The following is the cmd I use to compile:
make -e release
CC -O -mt -D_RWSTD_NO_TEST_AND_SET -D_RWSTD_SOLARIS_THREAD -DSYSTEM_NAME="\"Composer System\"" -DSYSTEM_COPYRIGHT="\"Cicada Corporation\"" -DSYSTEM_BUILD="\"103\"" -D__NUMBER_FIELD_ID__ -DNDEBUG -DDEBUG_TRACE -DDEBUG_LEVEL_FATAL -I/inc -DGEN_VAP_TIMESTAMP -I/cchk030/home/cefbuild/EMDS/liffeapi-9_0_4/include -I/cchk026/home2/cefbuild/emds-ha-sol8-103/cmpr/cmpris -DLIFFE_API_9 -I/cchk026/home2/cefbuild/emds-ha-sol8-103/cmpr/inc -I/cchk026/home2/cefbuild/emds-ha-sol8-103/rtl/inc -I/cchk026/home2/cefbuild/emds-ha-sol8-103/rtl/inc/dbapiv3 -I/cchk026/home2/cefbuild/emds-ha-sol8-103/ipcs/inc -c CISVapSetConnect.cpp -o CISVapSetConnect.o -KPIC
CC: Fatal error in iropt: Bus Error (core dumped)
*** Error code 1
make: Fatal error: Command failed for target `CISVapSetConnect.o'
Current working directory /cchk026/home2/cefbuild/emds-ha-sol8-103/vap_pack/isvapconnect9
*** Error code 1
make: Fatal error: Command failed for target `buildrelease'
Current working directory /cchk026/home2/cefbuild/emds-ha-sol8-103/vap_pack/isvapconnect9
*** Error code 1
make: Fatal error: Command failed for target `build'
*** Fail 'make -e build' for library 'isvapconnect9' at Tue May 9 10:10:09 2006

"iropt" is a component of the compiler that optimizes code. A compiler crash is always a compiler bug. You have the current C++ front-end patch, but you should verify that you have the current back-end (common compiler) patch as well.
If getting the current patches doesn't solve the problem, we would need a compileable test case that demonstrates the problem. If you have a service contract with Sun, you should submit a bug report via that channel.
A possible workaround is to compile this module without optimization (remove the -O option).
Side note: I see you are setting private macros associated with libCstd. We do not support modifying any macros starting with _RW. Those macros affect how the runtime library was built, and if you modify the macro settings, your code will not match the library. Possible results include failure to compile, failure to link, or unpredictable program behavior if the program does link.

RW-50010: Error, RC-50004: Fatal: Error occurred in App and exit_code=139

I am installing R12 on Oracle Enterprise Linux and gettiing above errors.
++++++++ Platform++++++
(I) OS: OEL 4 64-bit update 7 ( installed from DVD if that matters)
[root@arun2 vmware]# uname -a
Linux arun2.devar.com 2.6.9-78.0.0.0.1.ELsmp #1 SMP Fri Jul 25 16:04:35 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux
[root@arun2 vmware]# more /etc/redhat-release
Enterprise Linux Enterprise Linux AS release 4 (October Update 7)
(II) Apps: R12 64-bit (latest available on web released on Jan 13, 2009)
[root@arun2 rapidwiz]# ./RapidWizVersion
Oracle Applications Rapid Install Wizard
Version 12.0.4.6
(c) Copyright 2000-2006 Oracle Corporation. All rights reserved.
(III)H/W: Dell(insiron 530) Intel quad core with 6GB RAM 1TB disk
+++++++ rapidwiz+++++
1) Downloaded x86-64bit ebusiness suit from oracle site
2) unzipped all packages
3) installed recommend Linux rpms
[root@arun2 vmware]# more /tmp/orarpm.2.sh
rpm -Uvh binutils-2.15.92.0.2-25.x86_64.rpm
rpm -Uvh compat-db-4.1.25-9.i386.rpm
rpm -Uvh compat-db-4.1.25-9.x86_64.rpm
rpm -Uvh control-center-2.8.0-12.rhel4.5.x86_64.rpm
rpm -Uvh gcc-3.4.6-10.0.1.x86_64.rpm
rpm -Uvh gcc-c++-3.4.6-10.0.1.x86_64.rpm
rpm -Uvh glibc-2.3.4-2.41.i686.rpm
rpm -Uvh glibc-2.3.4-2.41.x86_64.rpm
rpm -Uvh glibc-devel-2.3.4-2.41.i386.rpm
rpm -Uvh glibc-devel-2.3.4-2.41.x86_64.rpm
rpm -Uvh glibc-common-2.3.4-2.41.x86_64.rpm
rpm -Uvh gnome-libs-1.4.1.2.90-44.2.x86_64.rpm
rpm -Uvh libstdc++-3.4.6-10.0.1.i386.rpm
rpm -Uvh libstdc++-3.4.6-10.0.1.x86_64.rpm
rpm -Uvh libstdc++-devel-3.4.6-10.0.1.i386.rpm
rpm -Uvh libstdc++-devel-3.4.6-10.0.1.x86_64.rpm
rpm -Uvh libgcc-3.4.6-10.0.1.i386.rpm
rpm -Uvh libgcc-3.4.6-10.0.1.x86_64.rpm
rpm -Uvh make-3.80-7.EL4.x86_64.rpm
rpm -Uvh pdksh-5.2.14-30.6.x86_64.rpm
rpm -Uvh setarch-1.6-1.x86_64.rpm
rpm -Uvh sysstat-5.0.5-19.el4.x86_64.rpm
rpm -Uvh xscreensaver-4.18-5.rhel4.14.0.1.x86_64.rpm
rpm -Uvh openmotif21-2.1.30-11.0.1.RHEL4.6.i386.rpm
rpm -Uvh libaio-0.3.105-2.x86_64.rpm
rpm -Uvh libaio-0.3.105-2.i386.rpm
rpm -Uvh libaio-devel-0.3.105-2.x86_64.rpm
Note: some of them were already applied.
4) Changed /etc/sysctl.conf
kernel.shmmax=3221225472
net.ipv4.ip_local_port_range = 2024 65000
kernel.semmsl=256
kernel.semmns=32000
kernel.semopm=100
kernel.semmni=142
kernel.shmall=2097152
kernel.shmmni=4096
kernel.msgmax=8192
kernel.msgmnb=65535
kernel.msgmni=2878
fs.file-max=65536
net.core.rmem_default=262144
net.core.rmem_max=262144
net.core.wmem_default=262144
net.core.wmem_max=262144
Note: rebooted the server couple of times
5) /etc/hosts entry
[root@arun2 vmware]# more /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
192.168.2.5 arun2.devar.com arun2
6) openmotif:
[root@arun2 vmware]# rpm -qa| grep openm
openmotif-2.2.3-10.2.el4
openmotif-devel-2.2.3-10.2.el4
openmpi-libs-1.2.5-5.el4
openmotif-2.2.3-10.2.el4
openmotif21-2.1.30-11.0.1.RHEL4.6
7) added couple of params to /etc/resolv.conf
options attempts:5
options timeout:15
8) Another hostname file
[root@arun2 rapidwiz]# more /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=arun2.devar.com
9) there is no file called /etc/sysconfig/networking/profiles/default/network
[root@arun2 rapidwiz]# ls -l /etc/sysconfig/networking/profiles/default/network
ls: /etc/sysconfig/networking/profiles/default/network: No such file or directory
10) soft and all in /etc/security/limits.conf
# Added for Oracle
hard nofile 65535
soft nofile 4096
hard nproc 16384
soft nproc 2047
11) It fails at 33% of steps 2
12) I find most binaries are crashing. ldd command on binary doesn't show anything is missing.
13) file on libraries looks like this
[oracle6@arun2 ~]$ file /d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libsqlplus.so /d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libclntsh.so.10.1
/d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libsqlplus.so: ELF 64-bit LSB shared object, AMD x86-64, version 1 (SYSV), not stripped
/d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libclntsh.so.10.1: ELF 64-bit LSB shared object, AMD x86-64, version 1 (SYSV), not stripped
It become challenging and frustrating for me. I am really exhausted. Any help would be greately appreciated.
Regards
-Arun
PS: snip of log file:
(a)
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for MARS6 instance
ADX Database Utility
(b) tail -30
/d01/oracle6/MARS6/db/tech_st/10.2.0/appsutil/log/MARS6_arun2/ApplyDatabase_02021441.log
Executable : /d01/oracle6/MARS6/db/tech_st/10.2.0/bin/sqlplus
The log information will be written to
/d01/oracle6/MARS6/db/tech_st/10.2.0/appsutil/log/MARS6_arun2/adcrdb_MARS6.txt
Creating the control file for MARS6_arun2 database ...
exit_code=139
Checking for errors ...
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : arun2
sDbDomain : devar.com
sDbPort : 1537
sDbSid : MARS6
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@arun2.devar.com:1537:MARS6
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=arun2.devar.com)(PORT=1537))(CONNECT_DATA=(SERVICE_NAME=MARS6)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=arun2.devar.com)(PORT=1537))(CONNECT_DATA=(SERVICE_NAME=MARS6.devar.com)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase

Thanks, appreciate your reply. As I mentioned earlier, binaries are crashing. (side note: I am on 10th attempt, so SID=MARS10)
1) There is a connection issue, not sure why.
2) I see, something cored. .... adcrdb.sh: line 107: 30881 Segmentation fault sqlplus /nolog......(full text below)
3) ldd on sqlplus in case required
[oracle6@arun2 bin]$ ldd sqlplus
     libsqlplus.so => /d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libsqlplus.so (0x0000002a95557000)
     libclntsh.so.10.1 => /d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libclntsh.so.10.1 (0x0000002a9574a000)
     libnnz10.so => /d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libnnz10.so (0x0000002a96ae6000)
     libdl.so.2 => /lib64/libdl.so.2 (0x00000039f7200000)
     libm.so.6 => /lib64/tls/libm.so.6 (0x00000039f7000000)
     libpthread.so.0 => /lib64/tls/libpthread.so.0 (0x00000039f7a00000)
     libnsl.so.1 => /lib64/libnsl.so.1 (0x00000039feb00000)
     libc.so.6 => /lib64/tls/libc.so.6 (0x00000039f6d00000)
     /lib64/ld-linux-x86-64.so.2 (0x00000039f6b00000)
4) last part of $ORACLE_HOME/appsutil/log/MARS10_arun2/ApplyDatabase_02061554.log
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : arun2
sDbDomain : devar.com
sDbPort : 1541
sDbSid : MARS10
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@arun2.devar.com:1541:MARS10
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=arun2.devar.com)(PORT=1541))(CONNECT_DATA=(SERVICE_NAME=MARS10)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=arun2.devar.com)(PORT=1541))(CONNECT_DATA=(SERVICE_NAME=MARS10.devar.com)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
adcrdb.sh started at Fri Feb 6 15:54:57 EST 2009
The environment settings are as follows ...
ORACLE_HOME : /d01/oracle6/MARS10/db/tech_st/10.2.0
ORACLE_SID : MARS10
TWO_TASK :
PATH : /d01/oracle6/MARS10/db/tech_st/10.2.0/perl/bin:/d01/oracle6/MARS10/db/tech_st/10.2.0/bin:/usr/bin:/usr/sbin:/d01/oracle6/MARS10/db/tech_st/10.2.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/usr/bin:/softwares/appsr12/startCD/Disk1/rapidwiz/unzip/Linux_x64:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
LD_LIBRARY_PATH : /d01/oracle6/MARS10/db/tech_st/10.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/d01/oracle6/MARS10/db/tech_st/10.2.0/lib:/usr/dt/lib:/d01/oracle6/MARS10/db/tech_st/10.2.0/ctx/lib
Executable : /d01/oracle6/MARS10/db/tech_st/10.2.0/bin/sqlplus
The log information will be written to
     /d01/oracle6/MARS10/db/tech_st/10.2.0/appsutil/log/MARS10_arun2/adcrdb_MARS10.txt
Creating the control file for MARS10_arun2 database ...
exit_code=139
Checking for errors ...
.end std out.
/d01/oracle6/MARS10/db/tech_st/10.2.0/appsutil/install/MARS10_arun2/adcrdb.sh: line 107: 30881 Segmentation fault sqlplus /nolog @/d01/oracle6/MARS10/db/tech_st/10.2.0/appsutil/install/MARS10_arun2/adcrdbclone.sql "so" "$S_RDBMS_VERS"
egrep: /d01/oracle6/MARS10/db/tech_st/10.2.0/appsutil/log/MARS10_arun2/adcrdb_MARS10.txt: No such file or directory
.end err out.
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase

Fatal error in Java Parser V2 :Status??

We still have a problem with entity references
in V2 of the JAVA XML parser (see Rolf van Deuresen 24-11).
It is a very urgent problem for us. We think that the XML-team
is working on it. Can you inform me abouth the status with the
(bug??)-fix. If you need more information on the problem, please
ask.
Greetings,
Erik van den Berg.
null

Attachments: "1|type=text/plain|desc=SAXSample output|17142|file=output.txt|"
Oracle XML Team wrote:
: Erik van den Berg (guest) wrote:
: : Oracle XML Team wrote:
: : : Erik van den Berg (guest) wrote:
: : : : We still have a problem with entity references
: : : : in V2 of the JAVA XML parser (see Rolf van Deuresen 24-
11).
: : : : It is a very urgent problem for us. We think that the
XML-
: : team
: : : : is working on it. Can you inform me abouth the status
with
: : the
: : : : (bug??)-fix. If you need more information on the
problem,
: : : please
: : : : ask.
: : : : Greetings,
: : : : Erik van den Berg.
: : : Have you downloaded the latest version 2.0.2.5 that was
made
: : : available this week?
: : : Oracle XML Team
: : : http://technet.oracle.com
: : : Oracle Technology Network
: : I have downloaded the new version 2.0.2.5 of the Java
parser,
: : and it stil doesn't work. Please refer to the original
message
: : from Rolf van Deursen (24th november 1999) for the details.
: : Maybe it will help you if I mail you a XML file that fails.
If
: : so, please give me your email account.
: : Greetings,
: : Erik van den Berg.
: You can attach files to messages in the forum here.
: Oracle XML Team
: http://technet.oracle.com
: Oracle Technology Network
Here's the XML that raises the Fatal error. The following
information is generated by the parser:
Fatal Error of Java SAX parser v2.0.2.5:
XML-0121: (Fatal Error) End tag does not match start
tag 'WOONPLAATS'. at line 517, column 4151 of XML document.
I attached the output of the SAXSample class, so you can trace
the line and column where the error occurs. Also attached is the
XML file (4Mb).
An other error that occurs with this XML is the following
situation:
<VOLGNR_FILM> 001</VOLGNR_FILM>
this piece of XML is parsed with the following events:
StartElement:VOLGNR_FILM
Characters:NR_
Characters:001
EndElement:VOLGNR_FILM
So the spaces are replace with a part of the start tag! This is
also only with large files. I tested this piece of XML in a
seperate file. Then it was parsed correctly.
Kind regards,
Erik.
null

Data pump error ORA-39065, status undefined after restart

Hi members,
The data pump full import job hung, continue client also hung, all of a sudden the window exited.
;;; Import> status
;;; Import> help
;;; Import> status
;;; Import> continue_client
ORA-39065: unexpected master process exception in RECEIVE
ORA-39078: unable to dequeue message for agent MCP from queue "KUPC$C_1_20090923181336"
Job "SYSTEM"."SYS_IMPORT_FULL_01" stopped due to fatal error at 18:48:03
I increased the shared_pool to 100M and then restarted the job with attach=jobname. After restarting, I have queried the status and found that everything is undefined. It still says undefined now and the last log message says that it has been reopened. Thats the end of the log file and nothing else is being recorded. I am not sure what is happening now. Any ideas will be appreciated. This is 10.2.0.3 version on windows. Thanks ...
Job SYS_IMPORT_FULL_01 has been reopened at Wednesday, 23 September, 2009 18:54
Import> status
Job: SYS_IMPORT_FULL_01
Operation: IMPORT
Mode: FULL
State: IDLING
Bytes Processed: 3,139,231,552
Percent Done: 33
Current Parallelism: 8
Job Error Count: 0
Dump File: D:\oracle\product\10.2.0\admin\devdb\dpdump\devtest%u.dmp
Dump File: D:\oracle\product\10.2.0\admin\devdb\dpdump\devtest01.dmp
Dump File: D:\oracle\product\10.2.0\admin\devdb\dpdump\devtest02.dmp
Dump File: D:\oracle\product\10.2.0\admin\devdb\dpdump\devtest03.dmp
Dump File: D:\oracle\product\10.2.0\admin\devdb\dpdump\devtest04.dmp
Dump File: D:\oracle\product\10.2.0\admin\devdb\dpdump\devtest05.dmp
Dump File: D:\oracle\product\10.2.0\admin\devdb\dpdump\devtest06.dmp
Dump File: D:\oracle\product\10.2.0\admin\devdb\dpdump\devtest07.dmp
Dump File: D:\oracle\product\10.2.0\admin\devdb\dpdump\devtest08.dmp
Worker 1 Status:
State: UNDEFINED
Worker 2 Status:
State: UNDEFINED
Object Schema: trm
Object Name: EVENT_DOCUMENT
Object Type: DATABASE_EXPORT/SCHEMA/TABLE/TABLE_DATA
Completed Objects: 1
Completed Rows: 78,026
Completed Bytes: 4,752,331,264
Percent Done: 100
Worker Parallelism: 1
Worker 3 Status:
State: UNDEFINED
Worker 4 Status:
State: UNDEFINED
Worker 5 Status:
State: UNDEFINED
Worker 6 Status:
State: UNDEFINED
Worker 7 Status:
State: UNDEFINED
Worker 8 Status:
State: UNDEFINED

39065, 00000, "unexpected master process exception in %s"
// *Cause: An unhandled exception was detected internally within the master
// control process for the Data Pump job. This is an internal error.
// messages will detail the problems.
// *Action: If problem persists, contact Oracle Customer Support.

Cc: Fatal error in /space/SunCompiler/SUNWspro/prod/bin/cg on openssl

Hello,
i'm trying to compile openssl using cc but i have error after doing the make
CFLAGS=" -m32 -xarch=sparc -D__SunOS_5_9"
./Configure shared --prefix=/openssl solaris-sparcv9-cc*After doing the make command , i have this output :*_
--root@mySolaris9 :/SOURCES/openssl-0.9.8e-- :# make
making all in crypto...
make[1]: Entering directory `/SOURCES/openssl-0.9.8e/crypto'
( echo "#ifndef MK1MF_BUILD"; \
echo ' /* auto-generated by crypto/Makefile for crypto/cversion.c */'; \
echo ' #define CFLAGS "cc -KPIC -DOPENSSL_PIC -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -xO4 -xtarget=ultra -m32 -xarch=sparc -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W -DMD5_ASM"'; \
echo ' #define PLATFORM "solaris-sparcv9-cc"'; \
echo " #define DATE \"`LC_ALL=C LC_TIME=C date`\""; \
echo '#endif' ) >buildinf.h
cc -I. -I.. -I../include -KPIC -DOPENSSL_PIC -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -xO2 -xtarget=ultra -m32 -xarch=sparc -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W -DMD5_ASM -c -o cryptlib.o cryptlib.c
cc -I. -I.. -I../include -KPIC -DOPENSSL_PIC -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -xO2 -xtarget=ultra -m32 -xarch=sparc -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W -DMD5_ASM -c -o mem.o mem.c
cc -I. -I.. -I../include -KPIC -DOPENSSL_PIC -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -xO2 -xtarget=ultra -m32 -xarch=sparc -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W -DMD5_ASM -c -o mem_clr.o mem_clr.c
cc -I. -I.. -I../include -KPIC -DOPENSSL_PIC -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -xO2 -xtarget=ultra -m32 -xarch=sparc -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W -DMD5_ASM -c -o mem_dbg.o mem_dbg.c
cc -I. -I.. -I../include -KPIC -DOPENSSL_PIC -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -xO2 -xtarget=ultra -m32 -xarch=sparc -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W -DMD5_ASM -c -o cversion.o cversion.c
cc -I. -I.. -I../include -KPIC -DOPENSSL_PIC -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -xO2 -xtarget=ultra -m32 -xarch=sparc -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W -DMD5_ASM -c -o ex_data.o ex_data.c
cc -I. -I.. -I../include -KPIC -DOPENSSL_PIC -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -xO2 -xtarget=ultra -m32 -xarch=sparc -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W -DMD5_ASM -c -o tmdiff.o tmdiff.c
cc -I. -I.. -I../include -KPIC -DOPENSSL_PIC -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -xO2 -xtarget=ultra -m32 -xarch=sparc -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W -DMD5_ASM -c -o cpt_err.o cpt_err.c
*cc: Fatal error in /space/SunCompiler/SUNWspro/prod/bin/cg*
*cc: Status 139*
*make[1]: *** [cpt_err.o] Error 139*
*make[1]: Leaving directory `/SOURCES/openssl-0.9.8e/crypto'*
make: *** [build_crypto] Error 1Do you have any idea for this error or how to fix this ?
Thanks in advance

I generate a core dump after compilation and using dbx i had this output :
((dbx) debug - /SOURCES/openssl-0.9.8e/crypto/core
Corefile specified executable: "/space/SunCompiler/SUNWspro/prod/bin/cg"
Reading cg
core file header read successfully
Reading ld.so.1
Reading lib_I_dbg_gen.so.1
Reading libsunir.so
Reading liblni.so.1
Reading libelf.so.1
Reading libm.so.1
Reading libc.so.1
Reading libdl.so.1
Reading libmd5.so.1
Reading libc_psr.so.1
Reading model_cg_ultra.so.3
program terminated by signal SEGV (no mapping at the fault address)
0x004619a8: Generic_hashtab+0x00d4: prefetch [%i5 + 264], #n_writes_strong
(dbx)

Fatal error in ir2hf

Hi,
I'm getting the following error when trying to compile glib 2.8 on AMD64:
ir2hf: internal error
cc: Fatal error in /opt/SUNWspro/prod/bin/ir2hf
Status 139
Any idea on tracking this down?
Thanks,
Manu

I tried glib-2.8.2 and got the same ir2hf failure for
gclosure.c file. It's a bug in C compiler's backend.
Thanks for reporting this.
I'll file bug report on that failure, and it probably will be
fixed in the next patch.
Meantime , it looks like there are two workarounds
for this:
1. To build glib without any optimizations, just
with -xarch=amd64 flag.
2. Build with optimizations but in 32-bit mode,
i.e. without -xarch=amd64 flag.
Unfortunately, in the 2-ndcase you also should
build in 32-bit mode all other components which
are using glib-2.8. Otherwise, you will get errors
at link time

Fatal Error while sending a fax

Hello
I'm having this problem with one of my users the company.
we have a fax server that is working almost fine for everyone but one specific user, whenever she tries to send a fax from her client computer, after dialing and when it says Transmitting...a Fatal Error comes up,, Event
ID 32028
I did all the suggested actions by Microsoft and other people in the forum, no luck
today i tried something else, send a fax with same user on another client computer...same error
so this is a user problem..i checked all the permissions and FAX USERS group, it is the same like others
please help!!

Hi,
For Event ID 32028, please refer to following article and check if can help you to troubleshoot this issue.
Event ID 32028 — Sent Fax Status
Meanwhile, please open Registry Editor and follow the path:
HKEY_CURRENT_USER\Software\Microsoft\Fax folder when the problematic user account logon, then compare with other user accounts which can be used to send fax as normal. Any difference?
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

A fatal error occurred while creating an SSL client credential. The internal error state is 10011.

Need help. I have my pilot lync 2013 pool up (in coexistence with 2010 production environment) and can log into Lync 2013 environment with a lync 2010 client but am not able to with a lync 2013 client. It just prompts for password but will not
take it. I'm sseeing this on my front end server multiple times:
A fatal error occurred while creating an SSL client credential. The internal error state is 10011.
Came across this http://www.logicspot.net/index.php?id=50 and tried disabling TLS 1.2, which I did and verified but yet the issue still exists.
All my certs are good coming from internal CA. My signin logs show below but keep in mind, this works just fine if using a 2010 lync client to my lync 2013 servers. Issue only occurs when trying to connect using a lync 2013 client.
1 Login: FAIL (hr = 0x1)
this request needs authentication, trying webticket from: https://domain.com/WebTicket/WebTicketService.svc
1.1 Get-NewWebTicket: FAIL (hr = 0x1)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
1.1.1 ExecuteWithMetadataInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.2 ExecuteWithWindowsOrNoAuthInternal: PASS
1.1.3 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.4 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Discovery task(0A4FF830) sent to URL http://domain.com completed with hr=0x80f10045
1.1.5 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.6 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
Rich

Hi,
Please check the server role and Web Services for Internet Information Services (IIS) are set correctly.
For the detailed IIS configuration, please check:
http://technet.microsoft.com/en-us/library/gg412871.aspx
As Lync client 2013 attempt to query in order to perform autodiscover of the Lync registration server. First
lyncdiscoverinternal.<sipdomain> Host (A) record and then
lyncdiscover.<sipdomain> Host (A) record. If neither of these records are resolvable then the legacy DNS SRV and A record fall-back process is used. So make sure you have add the two A record in DNS server.
More details:
http://blog.schertz.name/2012/12/lync-2013-client-autodiscover/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Sysprep - Fatal error occurred while trying to sysprep the machine

On the 4th attempt to sysprep a Windows 7 Enterprise system, I get the dreaded, 'A fatal error occurred while trying to sysprep the machine.'
The setuperr.log shows:
2010-08-04 13:57:58, Error [0x0f0073] SYSPRP RunExternalDlls:Not running DLLs; either the machine is in an invalid state or we couldn't update the recorded state, dwRet = 31
2010-08-04 13:57:58, Error [0x0f00ae] SYSPRP WinMain:Hit failure while processing sysprep cleanup external providers; hr = 0x8007001f
I've seen articles referring to the Windows Software Licensing Rearm program may have issues running more than three times in a single Windows image and to add <SkipRearm>1</SkipRearm> in the /unattend file... but this did not help.
The Windows Media Player Network Sharing Service has also been disabled which is often referred to in other posts.
The KB article: http://support.microsoft.com/kb/947212/en-us indicated that the resolution is to re-create the image for the machine... This is very frustrating. I'm hoping that there is
a better resolution???
How do you sysprep a machine more than three times to avoid this error?
Thanks!!
930193

I had a problem Where Runing slmgr /dlv returned 0 and could not sysprep a
32 bit Win 7 Installed on C:drive
Here is what I did to succeed whit Sysprep.
Disable UAC
Based on
This :
open notepad and copy paste the following:
@ECHO OFF
setLocal Enabledelayedexpansion
for %%d in (c d e f g h i j k l m n o p q r s t u v w x y z) do (
if exist %%d:\windows\system32 (
 SET drv1=%%d:\windows\system32
 reg load HKLM\MY_SYSTEM !drv1!
 reg delete HKLM\MY_SYSTEM\WPA /f
 reg unload HKLM\MY_SYSTEM
 GOTO END
:END
ECHO Done, Rebooting system...
timeout 3
wpeutil reboot
Then in notepad chose file>save as, in File Type select "All Files", name it "c:\reset.bat"
Reboot Your Pc, after bios screen press F8, Select "Repair Your Computer", select your keyboard layout, enter your credentials if needed,
then select the last option "Open Command Prompt"
type "c:\reset.bat" or "d:\reset.bat" (Sometimes Your Windows Partition get a different letter on the repair environment)
Back on Windows follow step five if needed.
Check under slmgr /dlv you have more than 0 under "Remaining Windows Rearm count"
Download pstools.zip from
here, extract content an copy psexec.exe to %windir%\System32
run psexec.exe and accept the license agreement so it won't bother when running afterwards, close it.
open notepad and copy paste the following:
@ECHO OFF
echo Stopping Windows Media Player Sharing Service..
echo.
net stop wmpnetworksvc
echo.
echo Deleting Old Sysprep Logs...
echo.
del /f /s /q %windir%\System32\sysprep\panther\*.*
echo.
echo Adding Required Sysprep Registry Keys...
echo.
REG ADD "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SoftwareProtectionPlatform" /v SkipRearm /t REG_DWORD /d 00000001 /f
REG ADD HKLM\SYSTEM\Setup\Status\SysprepStatus /v GeneralizationState /t REG_DWORD /d 00000007 /f
REG ADD HKLM\SYSTEM\Setup\Status\SysprepStatus /v CleanupState /t REG_DWORD /d 00000002 /f
psexec -i -s REG ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\Sysprep\Cleanup /v "{EC9FE15D-99DD-4FB9-90D5-5B56E42A0F80}" /t REG_SZ /d "C:\\Windows\\System32\\iesysprep.dll,Sysprep_Cleanup_IE" /f
psexec -i -s REG ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\Sysprep\Generalize /v "{EC9FE15D-99DD-4FB9-90D5-CE53C91AB9A1}" /t REG_SZ /d "C:\\Windows\\System32\\iesysprep.dll,Sysprep_Cleanup_IE" /f
psexec -i -s REG ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\Sysprep\Specialize /v "{EC9FE15D-99DD-4FB9-90D5-676C338DC1DA}" /t REG_SZ /d "C:\\Windows\\System32\\iesysprep.dll,Sysprep_Cleanup_IE" /f
echo.
echo Uninstalling MSDTC...
echo.
msdtc -uninstall
timeout 10
echo.
echo Reinstalling MSDTC...
echo.
msdtc -install
timeout 10
echo.
echo Cross Your Fingers, Finally Running Sysprep...
echo.
%windir%\System32\sysprep\sysprep /generalize /oobe /shutdown /unattend:unattend.xml
Change Last Line to suit your needs, ie: if you are not using an unnattend answer file, then delete /unattend:unattend.xml"
Then in notepad chose file>save as, in File Type select "All Files", name it "%windir%\System32\do.cmd"
if you use an unattend.xml file copy it to %windir%\System32\sysprep folder.
Once you are ready run %windir%\System32\do.cmd
Hope it helps,

Fatal Error while trying to update device software

I have recently purchased my first blackberry (the storm). I have added the desktop manager to my computer and when I connect my device, it automatically checks for updates. It shows that I have have software updates to download, it gives me a summary of applications to update. Then it asks to click finish. When I do that, it goes to an Error message: Fatal error has occured while updating your devices software. Please try again. I have tried many times, and I even removed the desktop manager and reloaded it, with the same results. Any ideas?

What version of the desktop manager are you using? Do you have enough free memory? and what version are you using now, options/status
If someone helped you give them kudos. Research all info!

RC-50004: Fatal: Error occurred in ApplyDatabase: Control file creation fai

Hi guys,
I am cloning and EBS 12.1.3 from one server to another, and when Configuring the target system database server with ''perl adcfgclone.pl dbTier'', I am getting the following error:
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
MOS is saying that it is due to wrong permissions on the /var/tmp/.oracle directory and we should give it the following permissions:
chmod 777 /var/tmp/.oracle
After giving those permissions and rebooting the server , and running the perl adcfgclone.pl dbTier script, I am still having the same problem:
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
This is the contents of the ApplyDBTier log file (since the file exceed 30.000 characters, i am going to post the parts where the errors occur:
[oratest@DLAERPSRV01 ERP_DLAERPSRV01]$ cat ApplyDBTier_05021530.log
Started ApplyDBTier at Thu May 02 15:30:44 WAT 2013
Version:
ApplyDBTier.java : 120.6.12010000.3
ApplyDBTier (prog) -1 true true true...
# Calling ApplyDBTechStack...
Executing runInstallDriver...
Started unzipping files...
Completed runInstallDriver.
Executing home registration for s_db_oh...
instantiate file:
source : /u02/oratest/db/tech_st/11.1.0/appsutil/template/adouidb.pl
dest : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/ouicli.pl
backup : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/ouicli.pl to /u02/oratest/db/tech_st/11.1.0/appsutil/out/ouicli20.pl
setting permissions: 700
setting ownership: oratest:dba
instantiate file:
source : /u02/oratest/db/tech_st/11.1.0/appsutil/template/config_ux.tmp
dest : /u02/oratest/db/tech_st/11.1.0/rdbms/lib/config.c
backup : /u02/oratest/db/tech_st/11.1.0/rdbms/lib/config.c to /u02/oratest/db/tech_st/11.1.0/appsutil/out/config21.c
setting permissions: 700
setting ownership: oratest:dba
instantiate file:
source : /u02/oratest/db/tech_st/11.1.0/appsutil/template/adlnkoh.sh
dest : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh
backup : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh to /u02/oratest/db/tech_st/11.1.0/appsutil/out/adlnkoh20.sh
setting permissions: 700
setting ownership: oratest:dba
Executing script in InstantiateFile:
/u02/oratest/db/tech_st/11.1.0/perl/bin/perl -I /u02/oratest/db/tech_st/11.1.0/perl/lib/5.8.3 -I /u02/oratest/db/tech_st/11.1.0/perl/lib/site_perl/5.8.3 -I /u02/oratest/db/tech_st/11.1.0/appsutil/perl /u02/oratest/db/tech_st/11.1.0/appsutil/clone/ouicli.pl
script returned:
Beginning OUI CLI cloning for s_db_ohThu May 2 15:30:46 2013
/u02/oratest/db/tech_st/11.1.0/appsutil/jre/bin/java -classpath /u02/oratest/db/tech_st/11.1.0/appsutil/java:/u02/oratest/db/tech_st/11.1.0/oui/jlib/OraInstaller.jar:/u02/oratest/db/tech_st/11.1.0/appsutil/java/xmlparserv2.jar oracle.apps.ad.clone.util.OracleHomeCloner -OUICLI -e /u02/oratest/db/tech_st/11.1.0/appsutil/ERP_DLAERPSRV01.xml -nolink -oaVar s_db_oh -homestub db -log /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/ohclone.log
Running OUI CLI home cloning from within OracleHomeCloner:
/u02/oratest/db/tech_st/11.1.0/oui/bin/runInstaller -clone -silent -force -nolink -waitForCompletion -invPtrLoc /u02/oratest/db/tech_st/11.1.0/admin/oui/ERP_DLAERPSRV01/oraInst.loc ORACLE_HOME=/u02/oratest/db/tech_st/11.1.0 ORACLE_BASE=/u02/oratest/db/tech_st/11.1.0 ORACLE_HOME_NAME=ERP_DB__u02_oratest_db_tech_st_11_1_0 -J-Doracle.installer.noLink=true
Finished OUI CLI cloning for s_db_oh with return code: 0Thu May 2 15:30:56 2013
Executing script in InstantiateFile:
/u02/oratest/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh
script returned:
adlnkoh.sh started at Thu May 2 15:30:56 WAT 2013
Log file located at /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/make_05021530.log
Using make file "ins_emagent.mk" for linking SYSMAN utilities...
Error while running adlnkoh.sh.
return code = .16
Please check logfile located at /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/make_05021530.log
.end std out.
.end err out.
Executing Technology Stack Configuration...
Executing runAutoConfig...
Deleting files of type INSTALL
Checking for file: /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/sqlnet.ora
Processing driver file: /u02/oratest/db/tech_st/11.1.0/appsutil/template/addbtmpl.drv
Checking for file: /u02/oratest/db/tech_st/11.1.0/appsutil/install/ERP_DLAERPSRV01/txkConfigDbOcm.pl
File exists
File deleted
Checking for file: /u02/oratest/db/tech_st/11.1.0/dbs/initERP.ora
File exists
File deleted
Checking for file: /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/listener.ora
File exists
File deleted
Checking for file: /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/tnsnames.ora
File exists
File deleted
Testing for RAC specific parameters before running autoconfig
No RAC specific parameters were found, running with CVM
Starting CVM in INSTE8_SETUP mode
Using Context file : /u02/oratest/db/tech_st/11.1.0/appsutil/ERP_DLAERPSRV01.xml
Attempting to create a back up of the Context file
Created back up file of name :
/u02/oratest/db/tech_st/11.1.0/appsutil/out/ERP_DLAERPSRV01/05021531/ERP_DLAERPSRV01.xml
===========================================================================
Starting synchronization of file system Context file and its templates with those in the database
Database connection : Failed
OAM Context editing support feature: Unverified
OAM Customization support feature : Unverified
File system template : /u02/oratest/db/tech_st/11.1.0/appsutil/template/adxdbctx.tmp
Checking for customizations to Context template
Warning: Unable to connect to Database.
If the system is OAM enabled, this may result in loss of customizations.
Looking for custom template at : /u02/oratest/db/tech_st/11.1.0/appsutil/template/custom/adxdbctx.tmp
Custom template : Not Available
Customizations found : None
File system Context file :/u02/oratest/db/tech_st/11.1.0/appsutil/ERP_DLAERPSRV01.xml
Checking the Context file for possible updates from the Database
Warning: Unable to connect to Database.
If the system is OAM enabled, this may result in loss of customizations and the Context files in DataBase and in the file system may be unsynchronized
===========================================================================
Starting Updates of Context file Thu May 02 15:31:44 WAT 2013
found context version : 120.34.12010000.14
available update version : 120.34.12010000.14
No updates to apply
Starting DB listener with command:
/u02/oratest/db/tech_st/11.1.0/appsutil/scripts/ERP_DLAERPSRV01/addlnctl.sh start ERP
Logfile: /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/addlnctl.txt
You are running addlnctl.sh version 120.1.12010000.4
Starting listener process ERP ...
LSNRCTL for Linux: Version 11.1.0.7.0 - Production on 02-MAY-2013 15:32:23
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Starting /u02/oratest/db/tech_st/11.1.0/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.1.0.7.0 - Production
System parameter file is /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/listener.ora
Log messages written to /u02/oratest/db/tech_st/11.1.0/admin/ERP_DLAERPSRV01/diag/tnslsnr/DLAERPSRV01/erp/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=DLAERPSRV01.camairco.local)(PORT=1523)))
STATUS of the LISTENER
Alias ERP
Version TNSLSNR for Linux: Version 11.1.0.7.0 - Production
Start Date 02-MAY-2013 15:32:23
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/listener.ora
Listener Log File /u02/oratest/db/tech_st/11.1.0/admin/ERP_DLAERPSRV01/diag/tnslsnr/DLAERPSRV01/erp/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523)))
Services Summary...
Service "ERP" has 1 instance(s).
Instance "ERP", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
addlnctl.sh: exiting with status 0
addlnctl.sh: check the logfile /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/addlnctl.txt for more information ...
.end std out.
.end err out.
checking DB Connection...
DEBUG: checkDBConnection in()
ADX Database Utility
getConnection() -->
sDbHost : DLAERPSRV01
sDbDomain : camairco.local
sDbPort : 1523
sDbSid : ERP
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@DLAERPSRV01.camairco.local:1523:ERP
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP)))
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP.camairco.local)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
DEBUG: checkDBConnection out()
Skipping Profile Phase
Skipping Apply Phase
Executing CreateDB...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : DLAERPSRV01
sDbDomain : camairco.local
sDbPort : 1523
sDbSid : ERP
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@DLAERPSRV01.camairco.local:1523:ERP
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP)))
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP.camairco.local)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
adcrdb.sh started at Thu May 2 15:32:40 WAT 2013
The environment settings are as follows ...
ORACLE_HOME : /u02/oratest/db/tech_st/11.1.0
ORACLE_SID : ERP
TWO_TASK :
PATH : /u02/oratest/db/tech_st/11.1.0/perl/bin:/u02/oratest/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/u02/oratest/db/tech_st/11.1.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/u02/oratest/db/tech_st/11.1.0/appsutil/clone/bin/../jre/bin:/u02/oratest/db/tech_st/11.1.0/appsutil/clone/bin/../jre/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oratest/bin:.
LD_LIBRARY_PATH : /u02/oratest/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u02/oratest/db/tech_st/11.1.0/lib:/usr/dt/lib:/u02/oratest/db/tech_st/11.1.0/ctx/lib
Executable : /u02/oratest/db/tech_st/11.1.0/bin/sqlplus
The log information will be written to
/u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/adcrdb_ERP.txt
Creating the control file for ERP_DLAERPSRV01 database ...
SQL*Plus: Release 11.1.0.7.0 - Production on Thu May 2 15:32:40 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORA-27154: post/wait create failed
ORA-27300: OS system dependent operation:semget failed with status: 22
ORA-27301: OS failure message: Invalid argument
ORA-27302: failure occurred at: sskgpbitsper
CREATE CONTROLFILE REUSE SET DATABASE "ERP"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter database open resetlogs
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter tablespace TEMP add tempfile '/u02/oratest/db/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ALTER DATABASE RENAME GLOBAL_NAME TO "ERP.camairco.local"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Connected to an idle instance.
ORA-27154: post/wait create failed
ORA-27300: OS system dependent operation:semget failed with status: 22
ORA-27301: OS failure message: Invalid argument
ORA-27302: failure occurred at: sskgpbitsper
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ORACLE instance shut down.
Connected to an idle instance.
ORA-27154: post/wait create failed
ORA-27300: OS system dependent operation:semget failed with status: 22
ORA-27301: OS failure message: Invalid argument
ORA-27302: failure occurred at: sskgpbitsper
CREATE CONTROLFILE REUSE SET DATABASE "ERP"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter database open resetlogs
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter tablespace TEMP add tempfile '/u02/oratest/db/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ALTER DATABASE RENAME GLOBAL_NAME TO "ERP.camairco.local"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
declare lib_ver varchar2(3);
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ERROR:
ORA-01012: not logged on
Process ID: 0
Session ID: 0 Serial number: 0
Disconnected
exit_code=1
Checking for errors ...
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 11.1.0.7.0 - Production on Thu May 2 15:32:42 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Disconnected
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : DLAERPSRV01
sDbDomain : camairco.local
sDbPort : 1523
sDbSid : ERP
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@DLAERPSRV01.camairco.local:1523:ERP
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP)))
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP.camairco.local)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
at oracle.apps.ad.clone.ApplyDatabase.doConf(ApplyDatabase.java:635)
at oracle.apps.ad.clone.ApplyDatabase.doApply(ApplyDatabase.java:473)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:366)
at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:110)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:67)
at java.lang.Thread.run(Unknown Source)
[oratest@DLAERPSRV01 ERP_DLAERPSRV01]$
Please guys, how can I solve this problem?

@Hussain Sawwan
Hi Hussain,
After successfully configured the DbTier and AppsTier with their respective post clone scripts the appstier was automatically started at the end.
But now, I can't seem to connect with my IE 9 and Firefow browsers.
Link: http://dlaerpsrv01.camairco.local:8002/OA_HTML/
Contents of the portpool.lst:
***** List of ports allocated based on port pool 2 *****
Database Port : 1523 (EXT_PORT)
RPC Port : 1628
Web SSL Port : 4445
ONS Local Port : 6102
ONS Remote Port : 6202
ONS Request Port : 6502
Web Listener Port : 8002
Active Web Port : 8002 (DUP_PORT)
Forms Port : 9002
Metrics Server Data Port : 9102
Metrics Server Request Port : 9202
JTF Fulfillment Server Port : 9302
MSCA Server Port : 10212-10217
MCSA Telnet Server Port : 10212,10214,10216 (DUP_PORT)
MSCA Dispatcher Port : 10806
Java Object Cache Port : 12347
OC4J JMS Port Range for Oacore : 23010-23014
OC4J JMS Port Range for Forms : 23510-23514
OC4J JMS Port Range for Home : 24010-24014
OC4J JMS Port Range for Oafm : 24510-24514
OC4J JMS Port Range for Forms-c4ws : 26510-26514
OC4J AJP Port Range for Oacore : 21510-21514
OC4J AJP Port Range for Forms : 22010-22014
OC4J AJP Port Range for Home : 22510-22514
OC4J AJP Port Range for Oafm : 25010-25014
OC4J AJP Port Range for Forms-c4ws : 26010-26014
OC4J RMI Port Range for Oacore : 20010-20014
OC4J RMI Port Range for Forms : 20510-20514
OC4J RMI Port Range for Home : 21010-21014
OC4J RMI Port Range for Oafm : 25510-25514
OC4J RMI Port Range for Forms-c4ws : 27510-27514
[root@DLAERPSRV01 appltest]#
Entry in the /etc/hosts in my Win 7 Laptop:
192.168.0.245 dlaerpsrv01.camairco.local dlaerpsrv01
What could be the cause of this problem? It is unfortunate to reach at this point and not being able to connect.

Update Operation Fatal Error when installing Technical Preview Build 10041 Upgrade

I posted this in the Microsoft Community forums and was redirected here.
Below is the original post (URL: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/update-operation-fatal-error-when-installing/6eaff1b9-0223-4357-afc8-884382590e82 )
Hello,
In trying to perform an upgrade install of the Windows 10 Technical Preview Build 10041 (as is the latest available for direct download as of my writing), I am running into a problem I cannot find mention of anywhere else on the web.
I fall into two categories with regards to this build: A) Product tester who actually needs to test application performance under Windows 10 on bare metal, B) Semi-crazy techie who loves using (usable) beta software as his primary environment ;)
so it is rather important to me that I get this working on my machine in some non-virtualized respect. I am reluctant to do a full/fresh install if installation problems are happening, because my Windows 8 product key has been f***ed up from the
start (likely some random database corruption) and I've had to utilize phone support to get around an "unknown error" the last two times I've had to use it. So, for fear of that key completely crapping out on me, I don't want to move to Win10 unless
I'm confident it will install and I can stick with it (for better or worse) through the end. Problems within the Preview after I install it I can deal with.
So, I first tried to install the Preview through the standard Windows Update method. The installer took about 7 hours (but from reading lots of internet discussions, stupidly long install times in that range seem to be a common problem with
this builds separate from it actually failing). During the reboot between the "Setting up Devices" (Or is it Setting up Drivers? I forget) and "Taking Care of a Few More Things" (Again, possibly paraphrased), for about a split second, underneath
the Windows logo and throbber, some error like this appeared:
Fatal Error Performing Update Operation # of ##: ERROR CODE
It only appeared for a fraction of a second, and I had no chance of reading the precise numbers or error.
However, the installer then seemed to continue, and went until the main circle was at 100%. As soon as 100% hit, however, the screen went black for something like 30min. Then, I briefly saw "Attempting to recover installation" before "Restoring
your previous version of Windows." And I was, quite impressively considering how far along that installer was, back in Windows 8.1 completely unharmed.
I tried again by burning an ISO and doing a disc upgrade install. I let that one run overnight and was asleep for the error, but I was back in Win8.1 in the morning, so I can only assume a similar thing happened there.
As for my system specs, I'm running on a MacBook Pro 9,1 under Boot Camp. I am upgrading from Windows 8.1.2 Pro with Media Center. I have found other online accounts of people quite successfully installing Windows 10 on Macs, so that isn't the issue.
Does anyone have any clue as to what this error might have been/be, and how I might fix it? Or at least have it on good authority that a fresh installation would be unaffected (meaning it's software-related)? If not, I can try installing to a VHD,
which would at least let me product test on bare metal, but wouldn't have the harddrive space to be my daily driver and would probably only get used occasionally.
Thanks in advance to anyone who can help!
So far, I have the yet-to-be-tried idea of a clean boot prior to installation.
If anyone here has any more specific ideas, lemme hear 'em.
Thanks!

To the individual who proposed this as an answer to my problem: It's not even applicable. I specifically stated that I was trying to avoid doing a clean installation (at least without knowing more about the problem at hand). An answer saying to do the thing
you're trying to avoid doing is not an answer. You can see my last reply for the current status of this issue. 6-8 hour blocks of time in which I can't use my computer (as is required to install build 10041) aren't super common for me, but I haven't abandoned
this thread. There have simply been no more updates. If your motivation as a mod was that you simply don't like there being unanswered threads on this forum, then perhaps you could attempt to contribute rather than arbitrarily marking the first reply as an
answer.
I will continue to update this thread as I try new things and get more information.
Thank you.

Receiver File Name Variable Substitution :payload: Fatal Error

Hi all
 i have a scenario of idoc to file.., i need to create a dynamic file name taking 1 field variable from the payload. The idoc -xml structure in XI is :
 <INVOICE03>
 <IDOC BEGIN="1">
 <EDI_DC40 SEGMENT="1">
 <field1> ashu </field1>
 </EDI_DC40>
 <ENEDL20>
 <field2> rawat</field1>
 <ENEDL20>
 </IDOC>
 <INVOICE03>
i need to pick th value of field2 , for the target file name..
In variable substitution i had given var = INVOICE03,1,IDOC,1,E1EDL40,1,E1EDL20,1,VBELN,1

STILL I AM GETTING THE ERROR :varsubst.VariableDataSourceException: Caught SAXException while parsing XML payload: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) .
NOTE : my target variable is getting populated properly.
i tried a lot of combinations in REFERENCE VARIABLE , even giving ( payload: xxx)
but for all changes it is giving the same error....
i referred the following blogs also :
Re: Variable substitution
Regards
AR

HI
the target payload is :
<?xml version="1.0" encoding="UTF-8" ?>
- <DELVRY03>
- <IDOC BEGIN="1">
+ <EDI_DC40 SEGMENT="1">
<TABNAM>EDI_DC40</TABNAM>
<MANDT>900</MANDT>
<DOCNUM>0000000002093240</DOCNUM>
<DOCREL>46C</DOCREL>
<STATUS>30</STATUS>
<DIRECT>1</DIRECT>
<OUTMOD>2</OUTMOD>
<IDOCTYP>DELVRY03</IDOCTYP>
<MESTYP>DESADV</MESTYP>
<STDMES>DESADV</STDMES>
<SNDPOR>SAPQA1</SNDPOR>
<SNDPRT>LS</SNDPRT>
<SNDPRN>ZLOG900</SNDPRN>
<RCVPOR>XIDEV</RCVPOR>
<RCVPRT>KU</RCVPRT>
<RCVPFC>WE</RCVPFC>
<RCVPRN>8300000717</RCVPRN>
<CREDAT>20070820</CREDAT>
<CRETIM>143341</CRETIM>
<SERIAL>20070703104747</SERIAL>
</EDI_DC40>
- <E1EDL20 SEGMENT="1">
 <VBELN>0083030974</VBELN> 
<VSTEL>5000</VSTEL>
<VKORG>STK</VKORG>
<INCO1>C&F</INCO1>
<INCO2>Melsele</INCO2>
<VSBED>03</VSBED>
<BTGEW>12000.000</BTGEW>
<NTGEW>0.000</NTGEW>
<GEWEI>GRM</GEWEI>
<VOLUM>0.000</VOLUM>
<ANZPK>00000</ANZPK>
<PODAT>20070703</PODAT>
<POTIM>104747</POTIM>
+ <E1EDL22 SEGMENT="1">
<VSTEL_BEZ>ID Warehouse</VSTEL_BEZ>
<VKORG_BEZ>Stock Transfer</VKORG_BEZ>
<INCO1_BEZ>Cost & Freight</INCO1_BEZ>
<VSBED_BEZ>Road</VSBED_BEZ>
</E1EDL22>
+ <E1EDL21 SEGMENT="1">
<LFART>ZRUS</LFART>
<EXPKZ>X</EXPKZ>
<LPRIO>03</LPRIO>
<TRAGR>0001</TRAGR>
- <E1EDL23 SEGMENT="1">
<LFART_BEZ>Delivery:Russian Exp</LFART_BEZ>
<LPRIO_BEZ>High</LPRIO_BEZ>
<TRAGR_BEZ>On pallets</TRAGR_BEZ>
</E1EDL23>
</E1EDL21>
+ <E1EDL18 SEGMENT="1">
<QUALF>ORI</QUALF>
</E1EDL18>
+ <E1ADRM1 SEGMENT="1">
<PARTNER_Q>WE</PARTNER_Q>
<PARTNER_ID>8300000717</PARTNER_ID>
<LANGUAGE>EN</LANGUAGE>
<FORMOFADDR>M/s.</FORMOFADDR>
<NAME1>NYK Logistics</NAME1>
<STREET1>Keetberglaan 2</STREET1>
<POSTL_COD1>B-9120</POSTL_COD1>
<CITY1>Melsele</CITY1>
<COUNTRY1>BE</COUNTRY1>
<REGION>RII</REGION>
</E1ADRM1>
+ <E1ADRM1 SEGMENT="1">
<PARTNER_Q>OSP</PARTNER_Q>
<PARTNER_ID>5000</PARTNER_ID>
<LANGUAGE>EN</LANGUAGE>
<NAME1>I/D WAREHOUSE : DELHI</NAME1>
<NAME2>B-84/1, Okhla Phase II, New Delhi</NAME2>
<CITY1>New Delhi</CITY1>
<TELEFAX>CST:LC/87/051655/05/61</TELEFAX>
<COUNTRY1>IN</COUNTRY1>
<REGION>DEL</REGION>
</E1ADRM1>
+ <E1ADRM1 SEGMENT="1">
<PARTNER_Q>OSO</PARTNER_Q>
<PARTNER_ID>STK</PARTNER_ID>
</E1ADRM1>
+ <E1EDT13 SEGMENT="1">
<QUALF>006</QUALF>
<NTANF>20070703</NTANF>
<NTANZ>000000</NTANZ>
<NTEND>20070703</NTEND>
<NTENZ>000000</NTENZ>
<ISDD>00000000</ISDD>
<ISDZ>000000</ISDZ>
<IEDD>00000000</IEDD>
<IEDZ>000000</IEDZ>
</E1EDT13>
+ <E1EDT13 SEGMENT="1">
<QUALF>003</QUALF>
<NTANF>20070703</NTANF>
<NTANZ>000000</NTANZ>
<NTEND>20070703</NTEND>
<NTENZ>000000</NTENZ>
<ISDD>00000000</ISDD>
<ISDZ>000000</ISDZ>
<IEDD>00000000</IEDD>
<IEDZ>000000</IEDZ>
</E1EDT13>
+ <E1EDT13 SEGMENT="1">
<QUALF>001</QUALF>
<NTANF>20070703</NTANF>
<NTANZ>000000</NTANZ>
<NTEND>20070703</NTEND>
<NTENZ>000000</NTENZ>
<ISDD>00000000</ISDD>
<ISDZ>000000</ISDZ>
<IEDD>00000000</IEDD>
<IEDZ>000000</IEDZ>
</E1EDT13>
+ <E1EDT13 SEGMENT="1">
<QUALF>007</QUALF>
<NTANF>20070703</NTANF>
<NTANZ>000000</NTANZ>
<NTEND>20070703</NTEND>
<NTENZ>000000</NTENZ>
<ISDD>00000000</ISDD>
<ISDZ>000000</ISDZ>
<IEDD>00000000</IEDD>
<IEDZ>000000</IEDZ>
</E1EDT13>
+ <E1EDT13 SEGMENT="1">
<QUALF>010</QUALF>
<NTANF>20070703</NTANF>
<NTANZ>000000</NTANZ>
<NTEND>20070703</NTEND>
<NTENZ>000000</NTENZ>
<ISDD>00000000</ISDD>
<ISDZ>000000</ISDZ>
<IEDD>00000000</IEDD>
<IEDZ>000000</IEDZ>
</E1EDT13>
+ <E1EDT13 SEGMENT="1">
<QUALF>015</QUALF>
<NTANF>20070703</NTANF>
<NTANZ>000000</NTANZ>
<NTEND>20070703</NTEND>
<NTENZ>000000</NTENZ>
<ISDD>00000000</ISDD>
<ISDZ>000000</ISDZ>
<IEDD>00000000</IEDD>
<IEDZ>000000</IEDZ>
</E1EDT13>
+ <E1EDL33 SEGMENT="1">
<ALAND>IN</ALAND>
<EXPVZ>4</EXPVZ>
<ZOLLA>0001</ZOLLA>
<IEVER>3</IEVER>
- <E1EDL34 SEGMENT="1">
<EXPVZ_BEZ>Air</EXPVZ_BEZ>
<ZOLLA_BEZ>New Delhi</ZOLLA_BEZ>
<IEVER_BEZ>Road</IEVER_BEZ>
</E1EDL34>
</E1EDL33>
+ <E1EDL24 SEGMENT="1">
<POSNR>000010</POSNR>
<MATNR>000000000001005372</MATNR>
<ARKTX>ALPRAZOMED TAB 0.5MG 5X10B BE</ARKTX>
<MATKL>S5202</MATKL>
<WERKS>5000</WERKS>
<LFIMG>2.000</LFIMG>
<VRKME>15S</VRKME>
<LGMNG>10.000</LGMNG>
<MEINS>S10</MEINS>
<NTGEW>0.000</NTGEW>
<BRGEW>12000.000</BRGEW>
<GEWEI>GRM</GEWEI>
<VOLUM>0.000</VOLUM>
<VOLEH>CMQ</VOLEH>
<LADGR>Z002</LADGR>
<TRAGR>0001</TRAGR>
<VTWEG>ST</VTWEG>
<SPART>20</SPART>
<GRKOR>000</GRKOR>
<POSEX>000000</POSEX>
- <E1EDL25 SEGMENT="1">
<LADGR_BEZ>Injectibles- for MP</LADGR_BEZ>
<TRAGR_BEZ>On pallets</TRAGR_BEZ>
<VTWEG_BEZ>Stock Transfer</VTWEG_BEZ>
<SPART_BEZ>Formulations</SPART_BEZ>
</E1EDL25>
- <E1EDL26 SEGMENT="1">
<PSTYV>NLN</PSTYV>
<MATKL>S5202</MATKL>
<PRODH>010080010010100102</PRODH>
<UMVKZ>5</UMVKZ>
<UMVKN>1</UMVKN>
<UEBTO>0.0</UEBTO>
<UNTTO>0.0</UNTTO>
<XCHBW>1</XCHBW>
<MVGR1>U</MVGR1>
<MVGR2>U</MVGR2>
<MVGR3>U</MVGR3>
<MVGR4>U</MVGR4>
<MVGR5>U</MVGR5>
- <E1EDL27 SEGMENT="1">
<PSTYV_BEZ>StandStockTransItem</PSTYV_BEZ>
<MATKL_BEZ>Belgium</MATKL_BEZ>
<PRODH_BEZ>Tablets</PRODH_BEZ>
<WERKS_BEZ>Export Warehouse</WERKS_BEZ>
<MVGR1_BEZ>Unasigned</MVGR1_BEZ>
<MVGR2_BEZ>Unassigned</MVGR2_BEZ>
<MVGR3_BEZ>Unassigned</MVGR3_BEZ>
<MVGR4_BEZ>Unasigned</MVGR4_BEZ>
<MVGR5_BEZ>Unassigned</MVGR5_BEZ>
</E1EDL27>
</E1EDL26>
- <E1EDL35 SEGMENT="1">
<GRWRT>0.00</GRWRT>
</E1EDL35>
- <E1EDL43 SEGMENT="1">
<QUALF>V</QUALF>
<BELNR>7200000025</BELNR>
<POSNR>000010</POSNR>
</E1EDL43>
</E1EDL24>
</E1EDL20>
</IDOC>
</DELVRY03>
i need <VBELN>0083030974</VBELN> in file name
Regards
AR

Fatal error in iropt: Status 139

Similar Messages

Maybe you are looking for