Fault Message Mapping for SOAP Scenario
Hi ,
I have configured a Proxy to SOAP synchronous scenario. The scenario is working fine. Now I need to map the fault message and display the message in SAP in case of any errors. I have used the standard Fault message. But I dont have any message from the WSDL which I can map to the standard fault message. Is it that we need to tell the wenservice team to modify the WSDL to include the fault message or is there any other way out to acheive the same.
Thanks
Amit
>>> Is it that we need to tell the wenservice team to modify the WSDL to include the fault message or is there any other way out to acheive the same?
Fault message is to provide meaningful message to the other end if there is a validation error or business exceptions or so...
a) You are importing WSDL of the third party and using it in soap receiver target side.
b) Normally it is best practice to create a WSDL which contains request, response and fault message. if your wsdl has fault message type declared then you can map the wsdl fault message with your proxy side fault message(which you can create). Please note you rely on the third party wsdl. Third party WSDL must have application logic coded to support fault message in case of application error occurs. Example if there is a validation that does not go through then their application logic must populate data in the fault message of wsdl. Then only if we map the wsdl fault msg to our proxy fault msg, we get meaningful fault details.
If your target WSDL does not support fault mesg, it is not going to be helpful at all.
Similar Messages
-
Fault message in sender SOAP scenario
Hi mates,
I've a o/b synch MI which is exposed as a web service. I've specified the fault message with faultcode, faultstring, faultactor and detail. I've a BPM as the receiver for this synch infterface. This BPM implements synch-asynch bridge.
Now the question is...How can I specify that a particular fault message needs to be returned to the SOAP caller. I can send the response for the SOAP caller using the send step with mode 'Closes S/A bridge'.
I appreciate you inputs.
thx in adv
praveenMoorthy,
I've the FM in my BPM. But...how can I append this to Response message as these have two different MTs?
Do you mean to say my response message should have a node for fault message data?
I'm trying to implement sth like in this blog <a href="/people/sap.user72/blog/2006/01/16/xi-propagation-of-meaningful-error-information-to-soap-client">Propagation of meaningful error information to SOAP Client</a>
To achieve FM in SOAP scenario, should I be using <b>only</b> a non-BPM receiver like a R/3 system using FM with exception as the receiver? Can this be not possible if I use BPM as receiver?
thx in adv
praveen -
Require a Message mapping for this Logic.
Hi Experts,
I require a Message mapping for this Logic.
In the Source there are 4 fields and, the Target side, the fields should appear like this.
Source Structure- File
Record
|-> Header
Order_No
Date
|-> Item
Mat_No
Quantity
Target Structure-IDoc
IDoc
|-> Header
|-> Segment
Delivery_Order_No
Recv_Date
|-> Item
|-> Segment
Delivery_Order_No
Material_Num
Recv_Quantity.
The Logic is for every Order number an IDOC is generated.And if the Material num matches then the quantity should be added. and important note is that the material numbers are different for every order number. That means if a material number is 2 in the order number A. Then the material number can never be 2 in any of the order numbers.Here is the following with an example for the above scenario.
For example:-
we have
Source Structure- File
Order-no Date Mat_No Quantity
1 01/02/2011 A 10
1 01/02/2011 B 15
1 01/02/2011 A 10
2 01/02/2011 C 10
2 01/02/2011 C 10
3 01/02/2011 D 20
3 01/02/2011 D 10
3 01/02/2011 E 25
Target Structure-IDoc
Delivery_Order_No Recv_Date Material_Num Recv_Quantity
1 01/02/2011 A 20
1 01/02/2011 B 15
2 01/02/2011 C 20
3 01/02/2011 D 30
3 01/02/2011 E 25
So for this example total of 5-Idocs created. That means for this example if Order_No is 1 When the Mat_No is A the quantity gets added. For this Scenario 1 IDoc with four Fields 2 in Header(Delivery_Order_No, Recv_Date) and 2 in Item(Material_Num, Recv_Quantity) is generated by adding the quantity field in the Target Side. Similarly if Order_No is 1 when the Mat_No is B then separate IDoc is generated with four Fields 2 in Header(Delivery_Order_No, Recv_Date) and 2 in Item(Material_Num, Recv_Quantity) in the Target Side. Similarly, if Order_No is 2 when the Mat_No is C, an IDoc is generated with four Fields 2 in Header(Delivery_Order_No, Recv_Date) and 2 in Item(Material_Num, Recv_Quantity) by adding the quantity field in the Target Side. ike wise the process goes on upto 3.Kindly do the needy..
Thanq very much in advance..
Edited by: Prashanth Bharadwaj on Oct 17, 2011 1:29 PMHi Prashanth,
Concatinate the two fields OrderNo and MaterialNo and follow the below logic which will resolve your problem.
concatinationOfOrderNo&MaterialNo>removecontext>sort>splitByValueChange>collapseContext-->IDOC
concatinationOfOrderNo&MaterialNo>removecontext>sort>splitByValueChange>collapseContext>splitByEachValue>subString(0,1)-->Delivery_Order_No
formatByExample>collapseContext>SplitByEachValue-->Recv_Date
FormatByExample:
input1:resulrOfSortByKey
input2:concatination>removecontext>sort-->SplitByValuChange
sortByKey:
input1:concatination-->removecontext
input2:date-->removecontext
concatinationOfOrderNo&MaterialNo>removecontext>sort>splitByValueChange>collapseContext>splitByEachValue>subString(1,1)-->Material_Num
formatByExample>sum>Recv_Quantity
FormatByExample:
input1:sortByKey
input2:concatination>removecontext>sort-->SplitByValueChange
SortByKey:
input1:concatination-->removecontext
input2:Quantity-->removeContext
Regards,
Priyanka. -
Define fault message type for RFC
Hi,
How can I define the fault message type for RFC so that when I import RFC from another server to XI, I can view this Fault type.
So far I could only see Request and Response type .
ThanksHi Rokie,
Acc. to me by default we are having only request and response mesages for RFC and in case some exception/fault is there the RFC will through this in the response under the Return parameter having msg,id number as sub fields which you can map to fault message type.
Sachin -
Friends ! Can you please provide step by step procedure for SOAP Scenario
Can you please provide step by step procedure for SOAP Scenario.
I want to practice it on my PC.Hi
1.First you need to Uploading the WSDL into the Integration Repository
For this
Go to your Software Component Version and open the required Namespace. Create an External Definition:
In the external definition object, choose Category wsdl and click Import external definitions.
2.Now create MI.
In the message interface object, select the message types of the external definition
object by using the input help.
3.Creating a SOAP Sender Channel
Here we have to define the namespace and the name of a message interface (values can be taken from Integration Repository).
Select the Quality of Service
4.Creating a SOAP Receiver Channel
The obligatory parameters in the configuration are Target URL and SOAP action.
5.Create a WSDL from an Interface Definition
Finally Test the Scenario Using a SOAP Client.
Get back if you have some doubts.
Thanks -
Stateful message processing for async scenario
Dear all,
my async scenarios:
1. RFC -> PI -> File
2. File -> PI -> RFC
Following facts:
- The second message is a response to the first one. Both message are separted and async.
- Scenario 2 can be send some hours after Scenario1.
- A response should only be send if a specified field in the message of first scenario is filled.
For example: Message in scenario has a field <ResponseNeeded>YES</ResponseNeeded>
This field does only exist in message of scenario 1.
- Both message have an ID field (e.g. <ID>4711</ID>) which can be used to identified the
corresponding message.
Questions:
- Is it possible to use stateful message processing for this scenario? Or do I need BMP + Correlation?
- A service interface with pattern "stateful" can only be used synchronously. So is it
possible to use this stateful for async message processing at least?
I would assume that I will need a BPM that sends the messsage and keep alive until a
response will be sends with same ID. After this I would check message of scenario1 and
send (or even not) the message of scenario2 to receiver depending on <ResponseNeeded>.
Thanks in advanced.
ChrisHi Chris,
Although BPM is possible here, I would not recommend you to use one here for the reason,
>>Scenario 2 can be send some hours after Scenario1.
This means you are keeping a process alive for so long which is not a good thing to do.
You could end up with a lot of open/live process instances.
Having said that, if you still wish to go ahead with BPM, the steps would be
1. Receive async (RFC req) - start process, correlation based on ID.
2. Switch step (Evaluate ResponseNeeded)
branch 1(True): a. Send asynch step - File
b. Receive async - File correlation - ID.
c. Send async - RFC call.
branch 2(false) a. Send async -File
3. Stop process.
Regards
Jai -
Is there pre-configured message mapping for SRM Content?
Hi,
My requirement is to do a message mapping between the SRM Message "Purchase Order Request" and the R/3 Idoc Orders01. Is there a preconfigured message mapping in SRM content or will I have to do it?
I see the generated proxy class from the outbound message interfacePurchaseOrderRequest_Out which will carry the message to XI and my requirement is to map it to the Interface ORDRSP.Orders01 Please let me know if there is a pre-configured message mapping for this ? or is the message mapping between the message "Purchase Order Request" and the R/3 IDOC ORDERS01 to be done by the developer himself?HI,
There are mappings available in the predelivered SRM content from SAP.
Did you import the SRM content into the repository? If so , you can find this.
www.service.sap.com/ibc -> Integrated Business Content for mySAP SRM->
Hope this helps,
Rgds,
Moorthy
Message was edited by:
Krishna Moorthy P -
Javax.xml.soap.SOAPException: Unable to create message factory for SOAP
I installde jwsdp1.5 and tomcat50-jwsdp, want to use the local registry server in jwsdp1.5 to publish and query services. the code can run successfully on other PC, but I can not run it successfully.
when I run the JSP+Servlet to publish a service, the information is:
javax.xml.registry.JAXRException: javax.xml.bind.JAXBException
- with linked exception:
[javax.xml.soap.SOAPException: Unable to create message factory for SOAP: Provider com.sun.xml.messaging.saaj.soap.MessageImpl could not be instantiated: java.lang.IllegalAccessException: Class javax.xml.soap.FactoryFinder can not access a member of class com.sun.xml.messaging.saaj.soap.MessageImpl with modifiers "protected"]
at com.sun.xml.registry.uddi.Processor.processRequestJAXB(Unknown Source)
at com.sun.xml.registry.uddi.UDDIMapper.getAuthorizationToken(Unknown Source)
at com.sun.xml.registry.uddi.ConnectionImpl.setCredentials(Unknown Source)
at Publish.doPost(Publish.java:66)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:535)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:790)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:709)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:572)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:644)
at java.lang.Thread.run(Thread.java:595)
Caused by: javax.xml.bind.JAXBException
- with linked exception:
[javax.xml.soap.SOAPException: Unable to create message factory for SOAP: Provider com.sun.xml.messaging.saaj.soap.MessageImpl could not be instantiated: java.lang.IllegalAccessException: Class javax.xml.soap.FactoryFinder can not access a member of class com.sun.xml.messaging.saaj.soap.MessageImpl with modifiers "protected"]
at com.sun.xml.registry.common.util.MarshallerUtil.jaxbMarshalObject(Unknown Source)
... 32 more
what can I do?? Help me please!!Thanks very very very much!It seems saaj-impl.jar (in case of Sun One Server) or the jar which contains implementationof SAAJ API is not in the classpath.
-
Failed in Message Mapping for Sender SOAP Adapter
I am using a synchronous Sender SOAP adapter for sending SOAP messages using HTTP security protocol. I am trying to send SOAP messages to XI and then to RFC-R/3. And Responses back from RFC to XI and then to SOAP. I am getting an error for failed in message mapping in SXMB_MONI for converting SOAP messages to RFC. When I debug it in Message Mapping in Integration Repository, it works fine.
Any help is appreciated.
Thanks in advance!
MrudulaHi,
try to do a full cache refresh
regards,
Jakub -
How to read fault message in async soap receiver
Hi experts,
I have an asynchronous scenario IDOC->XI->SOAP.
I've defined a SOAP fault message as part of the Inbound Message Interface.
When an error occurs on the SOAP Server, the error description is returned in the form of the fault message.
E.g.
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" >
<SOAP-ENV:Body>
<SOAP-ENV:Fault>
<faultcode>SOAP-ENV:Client</faultcode>
<faultstring>Cannot find the required parameter [lastName] in request message content.</faultstring>
<detail>
<ns1:com.sap.engine.services.webservices.additions.soaphttp.exceptions.ProcessException xmlns:ns1='http://sap-j2ee-engine/error'>Cannot find the required parameter [lastName] in request message content.</ns1:com.sap.engine.services.webservices.additions.soaphttp.exceptions.ProcessException>
</detail>
</SOAP-ENV:Fault>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
My question is how do I use this message in XI?
I cannot seem to read this fault message.
Please help.
Thanks.
Ron> > Fault messages are specially designed for Proxies
> and
> > RFC's only..............ASFAIK Fault messages wont
> > work for SOAP reciever side...
>
> They actually also work with SOAP scenarios.
>
> Your WSDL will contain the fault message and in such
> cases ( if you are using a BPM with exception handler
> ) , in case a fault message is sent back, you will be
> able to access this as well.
>
> Regards
> Bhavesh
Bhavesh,
I'm not using BPM and I'm using a asynchronous mode for invoking the WebService.
My WSDL has fault message defined, and I've assigned this fault message to the "Fault" portion of the Inbound Message Interface.
How can I access my fault message in this case?
Please help
Thanks.
Ron -
Exception in Message mapping for JDBC - XI- file
Hi,
In the above scenario, Sender JDBC adapter has processed the message but when i checked the processed XML messages, its giving an error message with details
<i>During the application mapping
com/sap/xi/tf/_MM_XXXX_a
com.sap.aii.utilxi.misc.api.BaseRuntimeException
was thrown: RuntimeException in Message-Mapping
transformatio~</i>
how to make the source structure so that it gets correctly populated with the result set of sender JDBC adapter? Are there any constraints while making the Data type for the source structure?
Regards,
Nitin Aggarwal.Hi,
The problem is solved...
Actually, the runtime system was not able to map the result set generated by the Sender JDBC adapter to the source structure of message mapping. This was because the result set has a particular structure and its like
<resultset>
<row>
<column1>value1</column1>
<column2>value2<column2>
</row>
</resultset>
To map this kind of structure to the source structure, a <b>row</b> element should always be there below the root node and the structure fields should be placed as sub elements to row. One more thing the root node of the source structure should be same as the document name specified in the sender JDBC adapter config.
Anyways, Thanks to all for the valuable efforts.
Regards,
Nitin. -
Message flow between advanced adapter engine and messaging system for ICO scenarios
Dear all,
I'm working on a PI 7.31 AEX box and created an ICO object for one interface with HTTP_AAE2IDoc scenario. The interface works quite well. When I looked in to message log of messages for this interface in PI monitor, I noticed that the internal XI message are put totally 5 times into the send queue and retrieved from send queue. In some steps I only see after retrieving a message from send queue and immediately put it back into send queue. Can someone please kindly explain the message flow between advanced adapter engine and messaging system and what exactly happens after each retrieving a message from send queue?
Below is an example of message log for one message:
12/08/2014 09:26:06.472 Information MP: processing local module localejbs/CallSapAdapter
12/08/2014 09:26:06.472 Information Application attempting to send an XI message asynchronously using connection HTTP_AAE_http://sap.com/xi/XI/System
12/08/2014 09:26:06.478 Information Trying to put the message into the send queue
12/08/2014 09:26:06.499 Information Message successfully put into the queue
12/08/2014 09:26:06.499 Information The message was successfully retrieved from the send queue
12/08/2014 09:26:06.499 Information The application sent the message asynchronously using connection HTTP_AAE_http://sap.com/xi/XI/System. Returning to application
12/08/2014 09:26:06.500 Information HTTP adapter successfully processed interface PlantResponse_Out
12/08/2014 09:26:06.501 Information Trying to put the message into the send queue
12/08/2014 09:26:06.501 Information Message status set to DLNG
12/08/2014 09:26:06.513 Information Message successfully put into the queue
12/08/2014 09:26:06.513 Information The message was successfully retrieved from the send queue
12/08/2014 09:26:06.515 Information Message status set to DLNG
12/08/2014 09:26:06.533 Information Trying to put the message into the send queue
12/08/2014 09:26:06.548 Information Message successfully put into the queue
12/08/2014 09:26:06.548 Information The message was successfully retrieved from the send queue
12/08/2014 09:26:06.550 Information Message status set to DLNG
12/08/2014 09:26:06.551 Information Executing Request Mapping "http://styrolution.com/pi/Integration/PlantMaintenance/PlantResponse/PlantResponse_to_Zcol_Basf_Inotif02_Inotif01_Zeupm_Inotif01_Ludwigshafen" (SWCV 085d2320fb3b11e2cc0bf4d50aea8c33)
12/08/2014 09:26:06.563 Information Trying to put the message into the send queue
12/08/2014 09:26:06.571 Information Message successfully put into the queue
12/08/2014 09:26:06.571 Information The message was successfully retrieved from the send queue
12/08/2014 09:26:06.573 Information Trying to put the message into the send queue
12/08/2014 09:26:06.573 Information Message status set to DLNG
12/08/2014 09:26:06.580 Information Message successfully put into the queue
12/08/2014 09:26:06.580 Information The message was successfully retrieved from the send queue
12/08/2014 09:26:06.582 Information Message status set to DLNG
12/08/2014 09:26:06.583 Information Delivering to channel: IDOC_R
12/08/2014 09:26:06.583 Information MP: processing local module localejbs/IDocOutboundModuleBean
12/08/2014 09:26:06.583 Information XI message received for processing
12/08/2014 09:26:06.587 Information Sender Party: Sender Service:SXX Receiver Party: Receiver Service:RXXCLNT200 Communication Channel:IDOC_R
12/08/2014 09:26:06.588 Information IDOC metadata repository is RXX
12/08/2014 09:26:06.589 Information Control record is not mandatory - control record will be added if not available
12/08/2014 09:26:06.590 Information XML Payload parsed to idoc document list with number of idocs: 1
12/08/2014 09:26:06.595 Information Sending idoc message to receiver R/3 system with TID XIh{lsRI824UITC0009OalmW
12/08/2014 09:26:06.813 Information IDOC message sent to receiver R/3 system
12/08/2014 09:26:06.817 Information TID XIh{lsRI824UITC0009OalmW confirmed
12/08/2014 09:26:06.819 Information Message was successfully transmitted to endpoint <local> using connection HTTP_AAE_http://sap.com/xi/XI/System
12/08/2014 09:26:06.821 Information Message status set to DLVD
Thanks & regards
DingjunHello All,
Thanks for the prompt responses and with best information, But apart from this,I need how an adapter(File/JDBC) works along
with AAE in PI 7.1. When does the job of File/JDBC adapter is completed and resumed in a synchronous case. That is,
File Location --> file adapter -
> XI(AAE) --> JDBC adapter --> database.
In file sender, lets suppose we have synchronous settings(Best Effort). Now when File adapter's job is finished and when it
gets back the response back from XI. Please explain step by step from starting(file adapter polling the location) to getting the response coming back to XI.
Regards,
Achari. -
Hello,
I have following scenario.
Synch, RFC Sender -
> XI----
>JDBC receiver.
Also I have defined Fault message data type, message type and also createed Message Interface in which I specified Fault Message type. Now my question is.
When an error occurs I want to get error message to be captured in fault message and map the fault message elements to RFC ---> Rerutn item elements. I was wondering how would I accomplish this?
Thank you,
BalajiFor sender RFC:
http://help.sap.com/saphelp_nw04/helpdata/en/67/6d0540ba5ee569e10000000a155106/frameset.htm
You must to create a in sm59 in R/3 and XI an R3 conection.
You can see this very interesting blog: /people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
Regards. -
AIF Value mapping for outbound scenario
Hello All,
Is there any possibility of using same value mapping which is defined for Inbound scenario can be reused for outbound scenario as well ?
Since, AIF value mapping can be defined based on Sending system but there is no option of creating value mapping pair between sending system and receiving system (similar to SAP PI value mapping) , is it only defined to use for Inbound scenarios ?
Thanks & Regards,
Dijesh TannaMichael
-->>>>you cannot have the same target value for two source values ?
What does this mean? Can't we have If name = A1, then value in the target should be Sales consultant
and if name = A2 then value in the target should be sales consultant?
My question was :
If name = A1, then value in the target should be sales consultant
If surname = A1, then value in the target should be purchase consultant
In the same graphical message mapping, can this be achieved using value mapping?
Thanks -
Adapter specific message attributes for SOAP adapter
Hi all,
I have gone through the SAP Help Documents for configuring SOAP Communication Channel. I am unable to understand how to implement ASMA for Soap adapter.
Please provide some links to help me understand the same
Many Thanks,
NehaHi Neha,
pls do chk the below links for SOAP adapter message attributes
http://help.sap.com/saphelp_nwpi71/helpdata/en/fc/5ad93f130f9215e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/43/0a7d1be4e622f3e10000000a1553f7/content.htm
http://publib.boulder.ibm.com/infocenter/wbihelp/v6rxmx/index.jsp?topic=/com.ibm.wbia_adapters.doc/doc/sap_xi/sapximst38.htm
http://publib.boulder.ibm.com/infocenter/wbihelp/v6rxmx/index.jsp?topic=/com.ibm.wbia_adapters.doc/doc/webservices/webservices16.htm
Regards
Sampath
Maybe you are looking for
-
How to find out the user exit is implemented
Hi All, Kindly let me know the process to be followed to find out the User exit is implemented in SAP system. I have seen many senriors suggestions for some treads to check if there is any Exit is implemented in the process when the system is behavin
-
PO information drop off from shopping cart
Hi everyone, We have a problem, a shopping cart is created and got approved, followon document PO is created and automatically ordered. Now the PO line item is deleted and again ordered, and the status of the PO is approved, now when we look into the
-
i connected my apple tv to my denon amplifier (AVR 4308), which is connected to my first tv set in the living room. I can successfully play video and music from my itunes library and video/music are streamed to my home theater/sound systems through m
-
How can I know which version of Firefox I'm using?
I tried to download an EOB from my insurance company's website, and it won't allow me to view the EOB. I talked to their web support and was told that I have to use the same version of Firefox that they support, which is Firefox 26 or 27. I don't kno
-
Does OSES work with Windows 2003 (EM64T) ?
Hi Roger, as i know OSES is a 32-Bit application and only certified for MS WIndows 2003 (x86) 32-Bit. But 32-Bit applications should also work in a 64-Bit OS. Are there any expierences with OSES working in a 64-Bit windows ? Will this be supported ?