Fax Preview using OJ 8610

After typing a message on the cover page, I then wanted to Preview the page.
I am unable to locate instructions for doing so.
Any advice would be welcome.

Hello CycleHead,
Welcome to the HP Support Forums!
I understand you are looking to preview a cover page that you would like to use when faxing. Are you trying to fax from your computer?
If so, what is the Operating System installed on the computer, Windows or Mac?
If using Windows, from the Printer Assistant icon on the Desktop click Send a Fax. Click Add Cover Page and then fill in the information. To view the information on the page, click the thumb nail of the cover page, it should load a full screen image of the cover page.
Cheers,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

Print Preview using crystal report in SAP B1 slow.

Dear all,
I face another problem. Print preview using crystal report in SAP B1 is very slow. Although i have create a query view in SQL server but it's still slow for my user. First time i create using table in crystal report. just drag the table. It's take more than 10 minutes. After that i move all the query to view in SQL server , it's take 1-2 minutes to print preview some time more.. But i think that it's still slow. Does any one know how to print preview fast. Just like in PLD.
Thanks in advance
bodhi86

Hello,
How do you answered to this question ?
Malika
Edited by: Malika Sanoune on May 13, 2011 1:48 PM

Open a Crystal Report preview using a button

Hello. I need to open a Crystal Report preview using a button from my add-on. I've already created my report, so I need to create the object, pass the parameters and open an screen with my preview. Does anyone has a C# example? Thank you.

hi,
this is code for open the crystal report press the button.
First import the crystal report using Report and layout manager
goto administration->setup->general--->Report and layout manager
create one button in add-on form.when we press the button the following event triggered.
get the docnumber for that particular form and pass it.
Case SAPbouiCOM.BoEventTypes.et_ITEM_PRESSED
                        If pVal.ItemUID = "btnPrint" Then
                            Dim strAcNcmr As Integer
                            strAcNcmr = objForm.Items.Item("txtDocNo").Specific.Value
                            Dim oRS As SAPbobsCOM.Recordset
                            oRS = objSBOAPI.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
                            oRS.DoQuery("SELECT MenuUID FROM OCMN WHERE Name = ' Purchase Indend' AND Type = 'C'")
                            objSBOAPI.SBO_Appln.ActivateMenuItem(oRS.Fields.Item(0).Value.ToString())
                            Dim oForm1 As SAPbouiCOM.Form
                            oForm1 = objSBOAPI.SBO_Appln.Forms.ActiveForm
                            oForm1.Items.Item("1000003").Specific.String = strAcNcmr
                            oForm1.Items.Item("1").Click()
                            oForm1.Items.Item("1").Visible = False
                            oForm1.Items.Item("2").Click()
                        End If
this is easy solution for open the crystal report for add-on form
Thanks & regards
B.lakshmi narayanan

Print preview using crystal report in SAP B1 is very slow.

Dear all,
I face another problem. Print preview using crystal report in SAP B1 is very slow. Although i have create a layout in AR invoice form and applying the print sequences (ie 4 prints). Does any one know how to print preview fast. Just like in PLD.
Thanks in advance
Kamlesh Naware

Hi,
Basically Crystal report run with SQL statement, I would suggest to do well performance tuning on SQL query / Store Procedure.
Structure your query in DBA manner that will make some how faster such as use ( inner join, less condition,...)..
also if it simple query then use Command in Crystal report rather store Procedure..that make some how Faster your report.
Thanks
Kevin
Edited by: Kevin Shah on May 27, 2011 4:21 PM

In Mail, my message preview used to be shown to the right side of the messages. Now it is showing below the messages. How can I move it back to the right?

In Mail, my message preview used to be shown to the right side of the messages. Now it is showing below the messages. How can I move it back to the right?

Select the Viewing tab in the Mail preferences dialog and uncheck the box marked Use classic layout.

How do you preview using a spool request number

How do you preview using a spool request number?
I have an application in which I have accumulated the results from several smartforms into one spool request. I have the spool request number, and am printing it using function RSPO_RPRINT_SPOOLREQ.
I need to be able to preview the contents of the spool request before printing. I can not preview when generating the smartforms, as that involves several previews, and I need to preview once only per spool request.
I have been trying to use RSPO_RDISPLAY_OUTREQ but it dumps immediately (line 47) with field symbol <FTSP01> not assigned.
Suggestions?

*With no faction module "COM_SE_SPOOL_DISPLAY", try this simple code, you can display the form *type spool (you also can put the code in a function module):
REPORT ypl_test_display_spool MESSAGE-ID zm_print.
PARAMETERS: rqident LIKE tsp01-rqident,
                        rqdocty LIKE tsp01-rqdoctype.
*--- there may be more types need to separate..., so use case...
CASE rqdocty.
WHEN 'OTF' OR 'SMART'.
    PERFORM display_form.
WHEN OTHERS.
    PERFORM display_others.
ENDCASE.
*&      Form DISPLAY_FORM
      display form type spool...
FORM display_form.
DATA: wstr_otf_control TYPE itcpp.
DATA: wtbl_buffer TYPE TABLE OF soli WITH HEADER LINE.
DATA: wtbl_otf TYPE TABLE OF itcoo WITH HEADER LINE.
DATA: wstr_retcode LIKE itcpp.
*--- return spool raw data
CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
    EXPORTING
      rqident              = rqident
    TABLES
      buffer               = wtbl_buffer
    EXCEPTIONS
      no_such_job          = 1
      job_contains_no_data = 2
      selection_empty      = 3
      no_permission        = 4
      can_not_access       = 5
      read_error           = 6
      type_no_match        = 7
      OTHERS               = 8.
IF sy-subrc <> 0.
    MESSAGE s013 WITH text-001.
    EXIT.
ENDIF.
LOOP AT wtbl_buffer .
    wtbl_otf-tdprintcom = wtbl_buffer(2).
    wtbl_otf-tdprintpar = wtbl_buffer+2.
    APPEND wtbl_otf.
ENDLOOP.
*--- some data to pass to this parameter, may not need...from SP01...
wstr_otf_control-tdcopies = 1.
wstr_otf_control-tdappl = 'TX'.
wstr_otf_control-tddest = 'LOCL'.
wstr_otf_control-tdpages = 0.
wstr_otf_control-tdnoprint = 'X'.
CALL FUNCTION 'DISPLAY_OTF'
    EXPORTING
      control = wstr_otf_control
    IMPORTING
      RESULT = wstr_retcode
    TABLES
      otf     = wtbl_otf.
IF wstr_retcode IS INITIAL.
*--- message...
ENDIF.
ENDFORM.                    "DISPLAY_FORM
*&      Form display_others
      display other types, may more types needed to separate...
      you can refer current version of SAP report RSPOLST2
FORM display_others.
CALL FUNCTION 'RSPO_DISPLAY_SPOOLJOB'
    EXPORTING
      rqident              = rqident
    EXCEPTIONS
      no_such_job          = 1
      job_contains_no_data = 2
      selection_empty      = 3
      no_permission        = 4
      can_not_access       = 5
      read_error           = 6
      OTHERS               = 7.
IF sy-subrc <> 0.
    MESSAGE s013 WITH text-001.
ENDIF.
ENDFORM.                    "display_others

CS5 crashes when previewing using temporary file

Hello everyone!
I've started having an issue with CS5 crashing anytime I try to preview a doc with out saving it first.
I've had the "Preview using temporary file" option checked for more than a year and never had an issue.
Any ideas?
Thanks So Much!

You might try clearing the Dreamweaver cache: http://forums.adobe.com/thread/494811

Problem while updating Tel no and Fax no using BAPI_BUPA_ADDRESS_CHANGE

Hi,
Im trying to update the Telephone number and Fax number using a BAPI but unable to update in Tcode BP .can you please tell teh solution.my code is below.
data : i_tel like BAPIADTEL occurs 0 with header line,
       i_fax like BAPIADFAX occurs 0 with header line,
       i_telx like BAPIADTELX occurs 0 with header line,
       i_faxx like BAPIADFAXX occurs 0 with header line.
i_tel-telephone = '800-266-3377'.
append i_tel.
i_fax-fax = '505-796-9601'.
append i_fax.
i_telx-telephone = 'X'.
append i_telx.
i_faxx-fax = 'X'.
append i_faxx.
To add Telephone number and FAX number
CALL FUNCTION 'BAPI_BUPA_ADDRESS_CHANGE'
EXPORTING
    businesspartner              = '0007000006'
TABLES
   BAPIADTEL                    = i_tel[]
   BAPIADFAX                    = i_fax[]
   BAPIADTEL_X                  = i_telx[]
   BAPIADFAX_X                  = i_faxx[].
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
      wait = 'X'.
if sy-subrc =0.
write:/5 'Successfully updated'.
endif.
Regards,
Deepthi.

DATA : i_tel LIKE bapiadtel OCCURS 0 WITH HEADER LINE,
         i_fax LIKE bapiadfax OCCURS 0 WITH HEADER LINE,
         i_telx LIKE bapiadtelx OCCURS 0 WITH HEADER LINE,
         i_faxx LIKE bapiadfaxx OCCURS 0 WITH HEADER LINE,
         i_return LIKE bapiret2 OCCURS 0 with header line.
i_tel-telephone = '800-266-3356'.
APPEND i_tel.
i_fax-fax = '505-796-9656'.
APPEND i_fax.
i_telx-telephone = 'X'.
i_telx-updateflag = 'I'.
APPEND i_telx.
i_faxx-fax = 'X'.
i_faxx-updateflag = 'I'.
APPEND i_faxx.
To add Telephone number and FAX number
CALL FUNCTION 'BAPI_BUPA_ADDRESS_CHANGE'
    EXPORTING
      businesspartner = '0007000006'
    TABLES
      bapiadtel       = i_tel[]
      bapiadfax       = i_fax[]
      bapiadtel_x     = i_telx[]
      bapiadfax_x     = i_faxx[]
      return          = i_return.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
      wait = 'X'.
IF sy-subrc = 0.
    WRITE:/5 'Successfully updated'.
ENDIF.
data:v_msg(255) type c.
loop at i_return.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
    ID              = i_return-id
    LANG            = 'EN'
    NO              = i_return-number
    V1              = i_return-message
IMPORTING
    MSG             = v_msg
EXCEPTIONS
    NOT_FOUND       = 1
    OTHERS          = 2 .
write:/5 v_msg.
endloop.

Print preview using Crystal Report

Hello All,
In SBO 8.8 or in 2007 with add-on (like B1UP) it is possible to have a cystal report launched by the preview buttons. It works perfectly when the document is stored in the DB, the preview is blanked if you don't have the document validated (created in SAP).
In PLD this functionnality is available with the screen variables, is there a way to have it in crystal report?
BR
Arnaud VIVIANT

Hello Gordon.
Thanks for response but it doesn't answer the question.
Question is : is it possible to use the print preview functionnality in crystal without creating a document in the database (as it is possible in layout designer) ?.
I know that the preview will work when I created the document in the DB.
Regards,
Arnaud

Should I download windows 7 or windows 8 release preview using parallels, should I download windows 7 or windows 8 release preview using parallels

I downloaded parallels and was given the option to download windows 7 or window 8 release preview. I have heard of people runing thier macs by downloading the release preview, but don't have a liscense of windows 7. If I buy windows 7 i will have to pay to upgrade to windows 8, but if I download the release preview I will be unable to use it after September 26 whan Microsoft releases windows 8. Then I will have to pay full price for windows 8. I want to know which is better to do because I need it for school next week.

Bnoggle wrote:
I want to know which is better to do because I need it for school next week.
Buy Windows 7 retail disk and use the 64bit disk to install into Parallels. This verison of Windows is well supported an there is lots of software your school is likely using it on.
Windows 8 is still in beta stage, not ready for everyone to use yet. However you CAN download the devlopers preview issue also to play around with.
http://osxdaily.com/2012/03/03/try-windows-8-consumer-preview-virtualbox/
WIth Virtual Machine software you can install many other operating systems and use any (or many depening how much RAM and storage space you have) at the same time.
So you can use Windows 7 and your schools software, and then quit that and play around with Windows 8, or Linux verisons too.
Windows in BootCamp or Virtual Machine?

How to set up fax solution using Windows 2008 R2 Fax server role and Exchange 2007

Hello,
I don't know if this is the right forum to post this but since it is related to Exchange I thought it might be. If this is not the right place, please direct me to the forum where my post would be more appropriate.
I'm looking to set up a Fax solution for the company that I work for as we are moving away from analog phone lines to VoIP using SIP. My original thought was to set up a Windows 2008 R2 server with Fax server role installed and have it route the fax message
to Exchange 2007 SP3 so the fax message can be delivered to each user's inbox. I was reading a little bit on the Windows Fax server role and from what I saw it looks like it can only route fax messages to one email address. This not ideal for my company. Is
there a way to have the fax server role route the email to each user's inbox? If so, how can I achieve this?
How can implement this for this sending outgoing faxes as well?
I don't know if this releveant or not but I will be using Asterisk as a media gateway between our SIP trunks and the Windows Fax server.
Any help is appreciated. Thanks!

Please find the below url for the complete Fax configuration in Exchange 2007 Unified Messaging
http://blogs.technet.com/b/exchange/archive/2007/04/18/3401950.aspx
The article is so easy to understand with detail procedure and guideliness
Exchange Queries

FAX Sazpscript using SO_DOCUMENT_SEND_API1

Hi,
Im using SO_DOCUMENT_SEND_API1 FM to sned the sapscript thru fax...
I have just a question about the FROM and TO fields on the cover of the fax...
Currently my output has no value on the said fileds... I want to put values on those fields... How am I going to do that?
Thanks a lot!

check this link for all your querries
Re: SAPScript to email and fax
Please Check this one:
SAP Script->PDF->Email
have alook at this code also
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
exporting
src_spoolid = mi_rqident
no_dialog = c_no
dst_device = c_device
importing
pdf_bytecount = gd_bytecount
tables
pdf = it_pdf_output
exceptions
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
others = 12.
check sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
loop at it_pdf_output.
translate it_pdf_output using ' ~'.
concatenate gd_buffer it_pdf_output into gd_buffer.
endloop.
translate gd_buffer using '~ '.
do.
it_mess_att = gd_buffer.
append it_mess_att.
shift gd_buffer left by 255 places.
if gd_buffer is initial.
exit.
endif.
enddo.
then call FM after populating attachment data
call function 'SO_DOCUMENT_SEND_API1'
exporting
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
importing
sent_to_all = w_sent_all
tables
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
also u can chk sample programe.
Refer to the code in the following link:
http://www.sapdev.co.uk/reporting/rep_spooltopdf.htm
do reward if helpful

Header not visible in alv output print preview using html_top_of_page

hi to all experts,
im using html_top_of_page for alv header and using fm reuse_alv_grid_display. when i see the print preview im getting the report output but not the alv header . what could be the problem

Hi tarun,
im unable to see the header print preview . I can see it in the report output .
here is my code
FORM html_top_of_page USING document
        TYPE REF TO cl_dd_document .
CREATE OBJECT: document.
DATA:text TYPE sdydo_text_element.
DATA: l_repid TYPE sy-repid,
        l_mandt TYPE sy-mandt,
        l_date(10),
        l_yr(4),
        l_mm(2),
        l_dd(2),
        l_hr(2),
        l_sec(2),
        l_min(2),
        l_time(10).
CALL METHOD document->add_gap
    EXPORTING
      width = 70.
text = text-005.
CALL METHOD document->add_text
    EXPORTING
      text      = text-005
      sap_style = 'HEADING'.
CALL METHOD document->new_line.
CONCATENATE 'Report:' sy-repid INTO text.
CALL METHOD document->add_text
    EXPORTING
      text         = text
      sap_emphasis = 'Strong'.
CALL METHOD document->add_gap
    EXPORTING
      width = 206.
l_date = sy-datum.
MOVE: l_date+0(4) TO l_yr,
        l_date+4(2) TO l_mm,
        l_date+6(2) TO l_dd.
CONCATENATE 'Run Date:' l_dd '.' l_mm '.' l_yr
              INTO text.
CALL METHOD document->add_text
    EXPORTING
      text          = text
      sap_style     = space
      sap_color     = space
      sap_fontsize = cl_dd_document=>medium
      sap_emphasis = cl_dd_document=>strong
      style_class   = space
* CHANGING
*    document      =
CALL METHOD document->new_line.
CONCATENATE 'Client:' sy-mandt INTO text.
CALL METHOD document->add_text
    EXPORTING
      text          = text
      sap_fontstyle = cl_dd_document=>medium
      sap_emphasis = cl_dd_document=>strong.
CALL METHOD document->add_gap
    EXPORTING
      width = 220.
l_time = sy-uzeit.
l_hr = l_time+0(2).
l_mm = l_time+2(4) .
l_sec = l_time+4(6).
CONCATENATE l_hr ':' l_mm ':' l_sec
       INTO l_time.
CONCATENATE 'Time:' l_time INTO text.
CALL METHOD document->add_text
    EXPORTING
      text           = text
      sap_fontstyle = cl_dd_document=>medium
      sap_emphasis = cl_dd_document=>strong
      style_class   = space
* CHANGING
*    document      =
CALL METHOD document->new_line.
CONCATENATE 'User Id:' sy-uname INTO text.
CALL METHOD document->add_text
    EXPORTING
       text          = text
      sap_style     = space
      sap_color     = space
      sap_fontstyle = cl_dd_document=>medium
      sap_emphasis = cl_dd_document=>strong
      style_class   = space
* CHANGING
*    document      =
CALL METHOD document->new_line.
CALL METHOD document->new_line.
text = 'Note: The maximum value for the column Qty to Print is 10,000.'.
CALL METHOD document->add_text
    EXPORTING
       text          = text
*    text_table    =
*    fix_lines     =
*     sap_style     = cl_dd_document=>strong
       sap_color     = cl_dd_document=>list_negative
*    sap_fontsize =
      sap_fontstyle = cl_dd_document=>strong
*    sap_emphasis =
*    style_class   =
* CHANGING
*    document      =
CALL METHOD document->new_line.
CALL METHOD document->new_line.
text = 'Selection Criteria:'.
CALL METHOD document->add_text
    EXPORTING
       text          = text
*      text_table    =
*      fix_lines     =
       sap_style      = 'KEY'
*      sap_color     =
       sap_fontsize = cl_dd_document=>medium
       sap_fontstyle = cl_dd_document=>strong.
* CALL METHOD document->new_line.
* CALL METHOD document->new_line.
IF so_mblnr[] IS NOT INITIAL.
    CALL METHOD document->new_line.
    IF so_mblnr-high IS NOT INITIAL.
      CONCATENATE 'Material Doc:' so_mblnr-low ' TO   ' so_mblnr-high INTO text SEPARATED BY space.
    ELSE.
      CONCATENATE 'Material Doc:' so_mblnr-low INTO text SEPARATED BY space.
    ENDIF.
    CALL METHOD document->add_text
      EXPORTING
        text          = text
        sap_fontsize = cl_dd_document=>medium
        sap_fontstyle = cl_dd_document=>strong.
ENDIF.
IF so_bwart[] IS NOT INITIAL.
    CALL METHOD document->new_line.
    IF so_bwart-high IS NOT INITIAL.
      CONCATENATE 'Movement Type:' so_bwart-low ' TO ' so_bwart-high INTO text SEPARATED BY space.
    ELSE.
      CONCATENATE 'Movement Type:' so_bwart-low INTO text SEPARATED BY space.
    ENDIF.
    CALL METHOD document->add_text
      EXPORTING
        text          = text
        sap_fontsize = cl_dd_document=>medium
        sap_fontstyle = cl_dd_document=>strong.
ENDIF.
IF so_bldat[] IS NOT INITIAL.
    CALL METHOD document->new_line.
    IF so_bldat-high IS NOT INITIAL.
      CONCATENATE 'Document Date:' so_bldat-low ' TO ' so_bldat-high INTO text SEPARATED BY space.
    ELSE.
      CONCATENATE 'Document Date:' so_bldat-low INTO text SEPARATED BY space.
    ENDIF.
    CALL METHOD document->add_text
      EXPORTING
        text          = text
        sap_fontsize = cl_dd_document=>medium
        sap_fontstyle = cl_dd_document=>strong.
ENDIF.
IF so_budat[] IS NOT INITIAL.
    CALL METHOD document->new_line.
    IF so_budat-high IS NOT INITIAL.
      CONCATENATE 'Posting Date:' so_budat-low ' TO ' so_budat-high INTO text SEPARATED BY space.
    ELSE.
      CONCATENATE 'Posting Date:' so_budat-low INTO text SEPARATED BY space.
    ENDIF.
    CALL METHOD document->add_text
      EXPORTING
        text          = text
        sap_fontsize = cl_dd_document=>medium
        sap_fontstyle = cl_dd_document=>strong.
ENDIF.
IF so_matnr[] IS NOT INITIAL.
    CALL METHOD document->new_line.
    IF so_matnr-high IS NOT INITIAL.
      CONCATENATE 'Material ID:' so_matnr-low ' TO ' so_matnr-high INTO text SEPARATED BY space.
    ELSE.
      CONCATENATE 'Material ID:' so_matnr-low INTO text SEPARATED BY space.
    ENDIF.
    CALL METHOD document->add_text
      EXPORTING
        text          = text
        sap_fontsize = cl_dd_document=>medium
        sap_fontstyle = cl_dd_document=>strong.
ENDIF.
IF so_werks[] IS NOT INITIAL.
    CALL METHOD document->new_line.
    IF so_werks-high IS NOT INITIAL.
      CONCATENATE 'Plant:' so_werks-low ' TO ' so_werks-high INTO text SEPARATED BY space.
    ELSE.
      CONCATENATE 'Plant:' so_werks-low INTO text SEPARATED BY space.
    ENDIF.
    CALL METHOD document->add_text
      EXPORTING
        text          = text
        sap_fontsize = cl_dd_document=>medium
        sap_fontstyle = cl_dd_document=>strong.
ENDIF.
IF so_lgort[] IS NOT INITIAL.
    CALL METHOD document->new_line.
    IF so_lgort-high IS NOT INITIAL.
      CONCATENATE 'Storage Location:' so_lgort-low ' TO ' so_lgort-high INTO text SEPARATED BY space.
    ELSE.
      CONCATENATE 'Storage Location:' so_lgort-low INTO text SEPARATED BY space.
    ENDIF.
    CALL METHOD document->add_text
      EXPORTING
        text          = text
        sap_fontsize = cl_dd_document=>medium
        sap_fontstyle = cl_dd_document=>strong.
ENDIF.
IF so_lifnr[] IS NOT INITIAL.
    CALL METHOD document->new_line.
    IF so_lifnr-high IS NOT INITIAL.
      CONCATENATE 'Vendor:' so_lifnr-low ' TO ' so_lifnr-high INTO text SEPARATED BY space.
    ELSE.
      CONCATENATE 'Vendor:' so_lifnr-low INTO text SEPARATED BY space.
    ENDIF.
    CALL METHOD document->add_text
      EXPORTING
        text          = text
        sap_fontsize = cl_dd_document=>medium
        sap_fontstyle = cl_dd_document=>strong.
ENDIF.
IF so_xblnr[] IS NOT INITIAL.
    CALL METHOD document->new_line.
    IF so_xblnr-high IS NOT INITIAL.
      CONCATENATE 'Delivery Note:' so_xblnr-low 'TO' so_xblnr-high INTO text SEPARATED BY space.
    ELSE.
      CONCATENATE 'Delivery Note:' so_xblnr-low INTO text SEPARATED BY space.
    ENDIF.
    CALL METHOD document->add_text
      EXPORTING
        text          = text
        sap_fontsize = cl_dd_document=>medium
        sap_fontstyle = cl_dd_document=>strong.
ENDIF.
IF so_ebeln[] IS NOT INITIAL.
    CALL METHOD document->new_line.
    IF so_ebeln-high IS NOT INITIAL.
      CONCATENATE 'PO NO:' so_ebeln-low ' TO ' so_ebeln-high INTO text SEPARATED BY space.
    ELSE.
      CONCATENATE 'PO NO:' so_ebeln-low INTO text SEPARATED BY space.
    ENDIF.
    CALL METHOD document->add_text
      EXPORTING
        text          = text
        sap_fontsize = cl_dd_document=>medium
        sap_fontstyle = cl_dd_document=>strong.
ENDIF.
IF so_usnam[] IS NOT INITIAL.
    CALL METHOD document->new_line.
    IF so_usnam-high IS NOT INITIAL.
      CONCATENATE 'User Name:' so_usnam-low ' TO ' so_usnam-high INTO text SEPARATED BY space.
    ELSE.
      CONCATENATE 'User Name:' so_usnam-low INTO text SEPARATED BY space.
    ENDIF.
    CALL METHOD document->add_text
      EXPORTING
        text          = text
        sap_fontsize = cl_dd_document=>medium
        sap_fontstyle = cl_dd_document=>strong.
ENDIF.
CALL METHOD document->new_line.
IF 1x3 = 'X'.
    text = 'Barcode label 1x3 maintained'.
    CALL METHOD document->add_text
      EXPORTING
        text          = text
        sap_fontsize = cl_dd_document=>medium
        sap_fontstyle = cl_dd_document=>strong.
ELSE.
    text = 'Bar Code label 2x4 maintained'.
    CALL METHOD document->add_text
      EXPORTING
        text          = text
        sap_fontsize = cl_dd_document=>medium
        sap_fontstyle = cl_dd_document=>strong.
ENDIF.
CALL METHOD document->new_line.

PDF preview using SSFCOMP_PDF_PREVIEW in full screen

Dear Friends,
I am using SSFCOMP_PDF_PREVIEW Function Module to display a PDF preview.
For this i have designed a Smartform and capturing the JOB_OUTPUT_INFO from FM that i get dynamically and using that as export parameter for SSFCOMP_PDF_PREVIEW.
I am able to see the PDF preview, but it is coming as a pop up in a predefined size. Can i change the size in which it is displayed?
Pls let me know.
Thanks,
Simha

Hi,
Thanks for the update.
Which window resize you meant?
Regards,
Simha

How do i have preview use outlook for mail as my primary email?

i am usning Preview on my MacBook Air, when ever i try to mail a documenet or a pdf in outlook, te Mail stamp jumps up which i do not use. My primary and only email sysmtem that i want to use is Outlook. can anyone suggest how to find where i can place the needied setting?
Thanks Joey

Mail>Preferences>General. Change the default mail application to what you want.

Fax Preview using OJ 8610

Similar Messages

Maybe you are looking for