FCC is not able to pick in sender file adapter

Hi Experts,
     I have configured sender contentent conversion.
My structure is like :
H - H1,H2,H3
D - D1,D2,D3
P - P1,P2,P3
I configured as below:
Document name:MT
Document name:namespace
Recordset name:Recordset
Recordset structure:H,1,D,,P,
Recordset sequence:ascending
Recordsets per message:*
Keyfieldname:KF
Keyfieldtype:string(case-sensitive)
H.fieldNames - H1,KF,H3
H.fieldSeparator -   ;
H.keyFieldValue -   H
H.endSeparator -   'nl'
H.missingLastfields - ignore
H.additionalLastFields - ignore
I have provided the same for D and P.
When i tried to pick the file my file is not picking and in communication channel log i am getting the following error
Success Channel : Entire file content converted to XML format
Warning Channel : Empty document found. Proceed without sending message
Success Confirmation mode test found. File will be resent next time .
.Could any one please help me what might be the problem exactly.
Thanks in advance
Kalam.

>>When i tried to pick the file my file is not picking and in communication channel log i am getting the following error
See, any file permission (777) is not set to execute .
If you have fcc configuraton errors, You will see in the communication channel.
Set File in Delete Mode (not in Test) in CC. Just to make sure the file is picked up or not.
Stop and activate the file adapter cc and see the behaviour

Similar Messages

Weblogic Classpath setting error not able to pick the properties file

Hi All,
We are using a third party jar and create a java Web service on the top of that jar. This jar file need two configuration file .properties and .xml when we deploy war for the application into weblogic server it will give file not found error. Though this file already exists inside the .war but from the application it is not able to pick the files.
We find that these file need to be put in weblogic domain home and we put it there and application works.
I decompile the jar and found that inside java class they use FileReader("allXXX.xml") path and when I Google it and found that it will pick the file from weblogic domain directory.
The issue is that we need to put properties file in specific weblogic folder like /3party/config by setting the class path inside startWebLogic.cmd. Please let us know solution for same
Thanks in advance
Edited by: sb**** on Mar 19, 2012 9:08 AM

Hi , I am also facing the similer issue. I am deploying war file of my Spring MVC application , but its not picking resource bundle .properties files from one of the configuration file.
<bean id="PropertiesRepository"
 class="LanguageBasedPropertiesRepository">
 <property name="propertiesFiles">
 <map>
 <entry key="en" value="classpath:/exceptionMessages.properties" />
 <entry key="es" value="classpath:/exceptionMessages_es.properties" />
 <entry key="default" value="classpath:/exceptionMessages.properties" />
 </map>
 </property>
 </bean>
Please let me know how we can modify this to make it work.
thanks .

Vaildating File name with the data in the file using sender file adapter

Hi,
Below is the scenario
1) Pick up files from a FTP server, the file name is dynamic, how do I put dynamic name in sender file adapter?
2) Determine if the user correctly named the file based on data in the file.
a. File naming structure that we will be concerned with is <company_code><accounting_time_period>.<extension>
b. The company code and the time period in the file name have to match the data in the file.
i. For example. If the file name is 1001_200712.csv and the data in the file is for company code 1005, time period 200712, the file is incorrectly named. Both values must be correct.
How do we do this?

Hi Sachin,
 As Rightly said by Krishna, You can not put Dynamic name in sender File Adapter .You have to provide the name of the file like "*.txt" in Sender Adapter and at runtime you can access this file name by using following UDF:
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String valueOld = conf.get(key);
return (valueOld);
As now you have picked up the file name at runtime.
Now concatenate source file fields Company_code and Accounting_timeperiod using "_" as delimiter in properties.Also concat the extension .Now you have required file name.
So using EQUALS standard function ,compare it with File Name fetched at runtime using above given UDF, and pass result as you desire to process further or not or to raise Alert to resend the file.
Thanks & Regards,
Anurag Garg
You can validate this file name in Mapping itself.

File not able to pick while using FCC at sender channel

Hi Experts ,
we design one scenario that we need to process flat file to ECC. So we have used FCC at sender channel.
while we testing , only its showing as successfull logs in channel , but we not able to pick the file.
could you please check the below details and let me know it i missed any thing.
PFB file which need to pick.
PFA scrren shot of FCC
26.Jun 2014 #123
Country|Currency|Amount|Code|Rate
Australia|dollar|1|AUD|18.989
Brazil|real|1|BRL|9.119
Bulgaria|lev|1|BGN|14.037
Canada|dollar|1|CAD|18.836
China|renminbi|1|CNY|3.242
Croatia|kuna|1|HRK|3.623
Denmark|krone|1|DKK|3.682
EMU|euro|1|EUR|27.455
Hongkong|dollar|1|HKD|2.603
Hungary|forint|100|HUF|8.916
IMF|SDR|1|XDR|31.154
India|rupee|100|INR|33.540
Indonesia|rupiah|1000|IDR|1.668
Israel|shekel|1|ILS|5.883
Japan|yen|100|JPY|19.824
Lithuania|litas|1|LTL|7.952
Malaysia|ringgit|1|MYR|6.272
Mexico|peso|1|MXN|1.550
New Zealand|dollar|1|NZD|17.678
Norway|krone|1|NOK|3.286
Philippines|peso|100|PHP|46.019
Poland|zloty|1|PLN|6.627
Romania|new leu|1|RON|6.258
Russia|rouble|100|RUB|59.842
Singapore|dollar|1|SGD|16.137
South Africa|rand|1|ZAR|1.894
South Korea|won|100|KRW|1.986
Sweden|krona|1|SEK|2.989
Switzerland|franc|1|CHF|22.569
Thailand|baht|100|THB|62.119
Turkey|lira|1|TRY|9.469
United Kingdom|pound|1|GBP|34.361
USA|dollar|1|USD|20.179
FCC details
channel logs.
regards
raju

Hi Peddaraju,
Cross check correct source directory and file name is maintained in the sender file communication channel. If everything is fine try to restart the XPI File Adapter service in NWA.
Troubleshoot as suggested in the below thread:
File Adapter in PI not reading file from file system.
Regards,
Krupa

Sender File(FTP protocol) Adapter not able to pick multiple files(eg *.xml)

Dear Experts,
I have SAP PI 7.0 installed on HP-UX. I installed Guild FTP on my Windows Vista machine.Configured File to File scenario. Sender File adapter(FTP Transport Protocol)is able to process the 'input.xml' file placed in FTP INBOX folder.
I want to process all/multiple XML files. For this I have changed File Access Parameters in Sender Communication channel as:
Source Directory - /INBOX
File Name - *.xml
Immediately Sender Communication status went into red with error log messages :
Error occurred while connecting to the FTP server "172.XX.XX.XX:21": java.lang.NullPointerException
Please let me know what is the issue. Thanks in Advance.

Hi
It should work with *.xml
Check with the connectivity as well.
If this is still unable to process files then check with the FTP server compatibility.
J2EE File adapter is based on RFC 959 and if GUILD FTP is non compatible to RFC format then exclusion mask may not work.
Thanks
Gaurav

PI is not able to pick the file from the FTP folder

This is the FILE TO IDOC scenario. We have configured the file adapter. But its not able to pick the file from the specified directory. We have tried changing the transfer mode from Binary to Txt & also we have tried to put advance selection for source file but it didn't work. Its throwing the below error:
PI Adapter Log:
An error occurred while connecting to the FTP server '10.130.150.21:8529'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 451 Unexpected reply coderequested action aborted: local error in processing'. For details, contact your FTP server vendor.
Also we have contacted the FTP team & they told that PI is sending an unsupported command. So instead of taking the file TLOG.txt, its treating this file name a s a directory. Please find the logs from FTP end below:
FTP Log:
(207197)2/5/2013 14:48:25 PM - sysisappi (63.130.82.16)> 230 Logged on
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> FEAT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 211-Features:
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MDTM
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> REST STREAM
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> SIZE
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MLST type*;size*;modify*;
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MLSD
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> AUTH SSL
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> AUTH TLS
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PROT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PBSZ
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> UTF8
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CLNT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MFMT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 211 End
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PBSZ 0
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 200 PBSZ=0
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PROT P
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 200 Protection level set to P
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CWD /Qas
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas" is current directory.
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CWD SAP_ORION
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD Inbound
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION/Inbound" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD IRIIN04
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION/Inbound/IRIIN04" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD TLOG.txt
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 550 CWD failed. "/Qas/SAP_ORION/Inbound/IRIIN04/TLOG.txt": directory not found.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> QUIT
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 221 Goodbye
It should list *TLOG.txt* but instead it is trying to get into a directory named *TLOG.txt*. same for other interface.
So me & my team is struggling for last couple of days to fix this issue.Please share your suggestion

Hi Sisir
The screen shot of your config doesn't seem to correspond to the FTP log. I say this because the * is dropped from file name pattern "*TLOG.txt" (comparing your config and the FTP log). Can you share an updated FTP log?
Sisir Das wrote:
"/Qas/SAP_ORION/Inbound/IRIIN04" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD TLOG.txt
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 550 CWD failed. "/Qas/SAP_ORION/Inbound/IRIIN04/TLOG.txt": directory not found.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> QUIT
Also, like Rajesh suggested, have you tried to manually check permissions by logging in, traversing the directory, and getting the file?
By the way, we always use backslash \ instead of forward slash in our configs. Not sure this would make any difference for you though. Also, I don't normally use a trailing \ at the end of the source directory path.

Sender File Adapter not able to get file via FTP from an external system

Hi,
I have a Sender File Adapter using FTP which polls a server every 10 seconds looking for a file ".xml". The adapter will connect and pick up the waiting file, but sometimes the adapter not able to get file via FTP from an external system. The file is on the server, but despite the polling, the adapter does not pick up it. There is no return error.
The connect mode is Permanently and the transfer mode is Binary.
Can you help me?
Thanks.
T.

Hi Teresa,
does this case appears with a file size higher the others?
Personally, I do not recommend to have a polling under 1min.
10s could be too just, if the file is not small and/or if the file server is far (several kilometers) to where the Adapter Engine is, and/or this file server is beside a firewall. Do not forget also that, with previous points, you could have like a conflict, betwen the 1st polling and the 2nd polling, if in less 10s PI adapter has not enough time: to connect to the FTP server (several Km), find the file (perhaps among 100 other files in the directory), go back to the file to Adapter Engine server (several Km again), convert your file to XML message (with a complex Content Conversion), then check the XML structure, and when all that is done, return back to FTP server (several Km), to archive the source file... Well It's my understanding of a FTP exchange with FILE adapter...
If you really need a 10s polling, that's mean your have a pseudo real time interface. In that case, in my mind file should not be used! but we should use a Web service, JDBC JMS (any exchange without a physical object like a file). For me, it's a non-sens to have a file in that case.
regards.
mickael

Sender File Adapter Not Picking Any File

Dear Expert,
I am newbie in PI. Just tried to create File Content Conversion Scenario. Details as follow :
1. Source Directory ..\file\log\test_q.txt
2. Target Directory ..\file\log\xml\test_q.xml
Transport Protocol : NFS
Message Protocol : File Content Conversion
Adapter Engine : Integration Engine
I have completed all the design and configuration in IR and ID. However, when I produce the log file in the directory, nothing happen.
Hacing checked in the RWB as well, I could not find any clue. simply nothing happen.
Would you please advise me on how to trigger the interface? As per my understanding, sender file adapter will be activated directly once the file is created.
Thank you very much in advance.
Best Regards,
Y

Hi Yonisiwa,
Things you should check here are:
1) If the sender file adapter is active or not.
2) If the source directory is correctly spelt or not. (Check if you are using the correct slash \ or /)
3) The file name/mask is correct or not.
4) The polling interval is too long.
Alternatively, you can check the message monitoring in RWB at the adapter level and go into the audit log if the message.
There you can see the reason for the file not being picked up.
Also check the Communication Channel status in the Component Monitoring link in RWB.
Regards,
Ravi Kanth Talagana

Sender file adapter is not picking the file from windows server

Hi Experts,
We have a sender file adapter running on Unix server. Now we have changed the source directory path from Unix to Windows in file access parameters. It is not picking the files from windows directory and not showing any error.
In this scenario, input file for sender adapter is *.xml and no content conversion.
Could any one please let me know is there anything needs to changed in file adapter.
Thanks in advance,
Sridhar. M

Sridhar,
What do you have in the directory path?
If it is a shared drive in unix then the directory in windows should also be a shared drive from XI system. Else if it is FTP check the address.
Regards,
---Satish

Production issue - Sender File adapter not picking up the files from folder

Hi Guys,
Ever since the upgrade from XI 3.0 to PI 7.1, we have come acrossinstances of weird error.
Thsi time again - now the 3rd time - tandom basis, in our production PI server, we have teh file slying in the source directory folder in the server.
I can see the files lying there in AL11.
However, it looks like that the file polling has just stopped and the channel is going blank in channel monitoring.
I have checked in SXMB_MONI and there are no messages since the morning.
I have tried craeting a replica of the current channel but it is not working.
This is teh production server and thsi has alraedy created production issues.
I ahve checked in the SDN forum but am not able to find the details.
Plaese help me.
I am anyway going to raise the issue with SAP now.
Regards,
Archana
<REMOVED BY MODERATOR>
Edited by: Prateek Raj Srivastava on Jun 8, 2010 4:50 PM

Hi Prateek,
I have trying all sorts since the morning and then just checked teh file permissions.
The file permissions were incorrect as compared ot the other files that were processed successfully today.
Somehow the permissions were changed on the server and the interface channel was not able to poll the files.
I got teh permissions changed back to 666 and all the files were pikced up in a minute.
I got the folder checked and it seems like that the permissions were changed somewhere very early in the morning and we are trying to find out how it happened and who did that.
However, another question i had - this sender file adapter was polling the source directory and deleting the files from there.
I would have expected that if the channel had issues with the file permission because of which it was not able to access the file, it would have thrown an error something like the file permissions error.
But there was not a single error in the channel monitoring.
How can we configure it in a beter way so that we at least soem kind of error indication?
Please advice.
Regards,
Archana

Sender File adapter not picking the file ABCD.PRN extension file

Hi
Am doing File to Abap Proxy scenario. My source will be in text format of fixed length of fileds 7.
My souce file will be generated by a third party machine with the extension EEE150809.PRN. In my scenario my file adapter should pick the file and update the same in ECC via a Proxy.
I have configured the Sender File adapter with Message Protocol - Content Conversion but file adapter is not picking the file. I have checked the Communication channel and status is fine. But the same Communication Channel works for .XML file.
What are the parameters that I have to consider with the file extension .PRN using File adapter?
Thanks.
S.

Hi Swarna,
You dont need to worry about the extension when picking the file. You can try using EEE* so that is picks all the files starting with EEE. If you have the fixed name then you can try giving EEE150809.*. Also EEE150809.PRN should not have any issue. Try to see in sender commu ication cahnnel for anyerrors. Probably there might be some network issues or authorisation issues. If you are reading with NFS then ask them to give necessary permissions. If you are reading through FTP check the user id and pwd you are using.
Regards,
---Satish

Sender File adapter is not picking up file

Hi,
I am usning the sender file adapter to process a file through FTP. Adapter does not pick up the file, however it recognise the file, as it appears in the error message. Below is the text of the error message:
Could not process file 'filename': com.sap.aii.adapter.file.ftp.FTPEx: 550 toSAP: No such file or directory.
I am not sure yet whether this file is read only. Can read only file not be processed in FTP ?
Thanks

Hi, I have the same problem. In advance, we can see in FTP Server log that CWD command it is called twice, for example :
00:00:59 10.15.64.187 [4669]USER MDM 331 0
00:00:59 10.15.64.187 [4669]PASS - 230 0
00:00:59 10.15.64.187 [4669]CWD MDM_55600_MATERIAL_STD\Outbound\ESN_800\_MATMAS05\Ready 250 0
00:00:59 10.15.64.187 [4669]CWD MDM_55600_MATERIAL_STD\Outbound\ESN_800\_MATMAS05\Ready 550 3
00:01:59 10.15.64.187 [4669]QUIT - 550 0
If we create a directory MDM_55600_MATERIAL_STD\Outbound\ESN_800\_MATMAS05\Ready into the first directory Ready where it is positioned with first cwd , its works !!
First CWD is called for read file an seccond for processing, somebody knows because this behavior ?
Best Regards
Claudio Maino

Not able to pick PO text via READ_TEXT when PO is created by copy.

Hi,
I am not able to pick PO texts from READ_TEXT function module for PO's which are created via Copy of another PO as entries for that PO texts are not found in STXH table.However after creating PO if I do some modification in any text and save PO again then READ_TEXT is able to pick that text.
Please help.
Thanks.

>
powerstar wrote:
> PLease try the sample code as shown below..
>
> data: lc_ebeln type ekpo-ebeln,
> lc_ebelp type ekpo-ebelp,
> lc_text type thead-tdname,
> lc_id type thead-tdid,
> lc_object type thead-tdobject.
>
> data: it_tline type table of tline,
> wa_tline type tline.
> *wa_ekpo type ekpo.
>
> concatenate wa_ekpo-ebeln wa_ekpo-ebelp into lc_text.
>
>
> lc_id = 'F03'.
> lc_object = 'EKPO'.
> call function 'READ_TEXT'
> exporting
> client = sy-mandt
> id = lc_id
> language = 'E'
> name = lc_text
> object = lc_object
> * IMPORTING
> * HEADER =
> tables
> lines = it_tline
> exceptions
> id = 1
> language = 2
> name = 3
> not_found = 4
> object = 5
> reference_check = 6
> wrong_access_to_archive = 7
> others = 8
> .
> if sy-subrc <> 0.
> * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
> * WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
> endif.
>
> Regards,
> *******.
Did you get a chance to see what the OP is asking about?

FCC Send File Adapter - missingLastFields not working

Hi
I have a flat file to capture using the sender File adapter
Parameter as follows:
Header_fieldNames : Key,Name,StaffID,Telephone
Header_fieldFixedLengths : 2,12,10,8
Header_endSeparator : 'nl'
Line_fieldNames : Key,Address,Company,LineText
Line_fieldFixedLengths : 2,20,20,40
However there are times where last field come in missing.
Hence I use the Header_missingLastFields : error
                          Line_missingLastFields : error
However it does not seem to be working as the adapter fails to pick the file from the FTP folder
but if I replace error with ignore, the sender adapter picked the files and process and send to the receiver adapter.
I need to flagged error in sxmb_moni if last field or last few fields are missing....any advise how could this be achieve ?
Regards
Fred

Hi Freddy,
I think you might like to specify missingLastFields = add. then it will add the missing fields as empty. you can further check if these are empty in mapping and then fail the message or create an alert.
If you specify "ignore" then you will not get those fields in your structure and if you specify "error" then the file will not be picked up.
have a look here
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
missingLastfields
If the inbound structure has less fields than specified in the configuration then the XML outbound structure is created as follows:
○       ignore
Outbound structure only contains the fields in the inbound structure
○       add
Outbound structure contains all fields from the configuration; the fields missing in the inbound structure are empty.
○       error
Conversion is terminated due to the incomplete inbound structure. An error message is displayed
regards,
francis

Z-Program not able to pick up Payment Run date & Identification.

Hi,
I created a Z-Program for Payment file creation.
This Z-program able to pick up Payment Run Date & Identification if I run it alone ( back ground and fore ground).
My issue is, if I run it from F110 with variant, it is not able to pick up the Payment Run date & Identification.
I used following code to get the Payment Run date. (SAP Version 4.6C)
*------- SPA/GPA-Parameter
DATA:    BEGIN OF gpa,
           laufd             LIKE f110v-laufd,
           laufi             LIKE f110v-laufi,
         END OF gpa.
IF p_laufd IS INITIAL OR p_laufi IS INITIAL.
Get the parameter values for Run Date & Identification from F100, if
User not passed the above parameters while running this program
    GET PARAMETER ID '110' FIELD gpa.
    MOVE : gpa-laufd TO p_laufd.
    MOVE : gpa-laufi TO p_laufi.
ENDIF.
Your help appreciated.
Thanks,
Reddy

Hello,
What exactly is your requirement?
IF p_laufd IS INITIAL OR p_laufi IS INITIAL.
* Get the parameter values for Run Date & Identification from F100, if
* User not passed the above parameters while running this program
GET PARAMETER ID '110' FIELD gpa.
MOVE : gpa-laufd TO p_laufd.
MOVE : gpa-laufi TO p_laufi.
ENDIF.
Your code will execute if the user doesnot pass Run Date & Run ID. But you CANNOT execute F110 without passing Run Date & Run ID.
Hope this helps.
BR,
Suhas

FCC is not able to pick in sender file adapter

Similar Messages

Maybe you are looking for