Trying to use signal in and signal out but couldn't pass parameters

Hi all,
           I am trying to use Signal out from 1st iview and trying to get the same parameters to the second iview where this iview gets populated when i click a button in result of first iview.
I have created these two iviews in same model and it deployed without errors.
When i run the first iview and give the parameters and say submit i get the result and when i click a button a new iview opens(requirement) but its not taking the same parameters as i have given in first iview.
Could any one give me suggestions how to use them or where should i correct it.
Thanks
Venkat

Hi,
please follow these steps you will be able to achieve the results:
1.> Go to the form of the first iview.Drag output port and create signal out with proper name.Click the link created in between the signal out and the form and give a proper name(event name). This name you have to mentioned in the button action property.Go to the form and click the button property.Then in action tab you can mentioned the action as custom action.
2.> Configure the signal out means select the fields which you want to transfer to the other iview.
3.> Then go to the other layer and drill down in that.
4.> create a form and drag input port of it and create a signal in and give the same name as you have mentioned in the signal out.
5.> configure the signal in. And give all the fields which you have mentioned in the signal out.(it is case sensitive, so better give the correct names)
6.> Double click the form and select all the fields which you want to be visible on the form.
7.> just save nad deploy the model and you can transfer data between the two iviews.
You can check with this link having same type of issue:
Re: pass data between forms in different layers
Regards,
Nutan

Similar Messages

  • Hi I'm a total novice, as you will see. But Iam trying to use template of an employee schedule but when I try to add extra columns it does not add the preset formula with it, so it works out total hours and total pay?   If any one can help please.

    Hi I'm a total novice, as you will see. But Iam trying to use template of an employee schedule but when I try to add extra columns it does not add the preset formula with it, so it works out total hours and total pay?   If any one can help please before I throw it through the window!

    Grum12 wrote:
    Hi I'm a total novice, as you will see. But Iam trying to use template of an employee schedule but when I try to add extra columns it does not add the preset formula with it, so it works out total hours and total pay?   If any one can help please before I throw it through the window!
    Hi Grum,
    If the formulas aren't filling to the new column, you must have changed something in the template since you first opened it. Numbers is rather fussy about filling row content in columns as they are added. Only rows with the same expression in every Body Column will fill when a column is added. Just as an experiment, start a new Employee Schedule document from the Template Chooser and then add a column by clicking the Add Column handle in the upper right corner of the table. If that works, as it should, then think about what might have changed in your working document to disconnect that feature. Maybe we can figure it out together.
    Jerry

  • HT201407 When I did the latest update, my phone was wiped out completely. My laptop that I had everything on, crashed. I have a new laptop, tried to update on it and of course i couldn't without deauthorizing my account then reauthorizing. I need help!

    When I did the latest update, my phone was wiped out completely. My laptop that I had everything on, crashed. I have a new laptop, tried to update on it and of course I couldn't without deauthorizing my account then reauthorizing. I need help! I want my ringtones and picturesd back, and can't get them. Does anyone know how to do this given my situation?
    Thanks!

    cathorio wrote:
    I recently changed my lap top. My problem is the new lap top won't accept my apple I D it asked me to sing up for a new one which I did.
    I am puzzled by this. The laptop doesn't need the Apple ID - but iTunes does. I could be missing something but ....
    Why would you not be able to use your existing Apple ID and iTunes account on a new laptop? If you authorized the computer - you should be able to use your existing account - unless you already had 5 computers authorized with the existing ID - and that was why iTunes would not accept the ID. However, I'm sure that you would have received a popup message from iTunes telling you that you had reached the limit.
    I just received a new MBP and my daughter did as well. My entire family shares an Apple ID and we had no issues at all with my Apple ID and iTunes on our new computers and I did not have to sign up for a new account. Did you even try the old ID?

  • TS2756 iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???

    iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
    as i said i have two iphone 4S,,,,,
    1st one --- has os 5.1
    2nd one has os 6.0
    i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
    but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
    plz reply asap...!!!
    thnxxx in advance!!!

    If not this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem.
    Also heating sometimes works. See:
    Why can't I select my wifi settings?
    A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Then:
    Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Just got a new IPAD3, straight out of the box, but I cant charge it, I have tried with the power plug and cable out of the box but no joy, i have tried resetting the iPad but still no joy, have tried different plug sockets, different plugs/cables, help

    Just got a new IPAD3, straight out of the box, but I cant charge it, I have tried with the power plug and cable out of the box that came with it but no joy, i have tried resetting the iPad but still no joy, have tried different mains plug sockets around the house with no joy, I have tried different USB mains plugs but again no joy, I tried using my new iPad cable into the USB port of my MacBook Pro laptop but still no joy, then, I tried using my old iPod classic cable into my MacBook Pro and that worked, so I have a way of charging my new iPad3 but its not practical as i have to take my MacBook Pro everywhere if I want to charge it which kind of defeats the object of having an iPad, has anybody experienced anything similar and how was it fixed? can anybody help me please...

    Grumpy Gator,
    Please note it did say at the store's discretion, but people have actually been able to return it to the on-line store. (I only saw a couple who tried.)
    And given the outcry, I would think Apple might have other Apple stores join in. Just in case, though, if you can, you might bring it in today.
    If it's an ARS, my guess is they can stick to their 14 day return. Apple cannot force them to do it. SO if it's not bought directly from Apple, and it's past the 14 day deal, I'd bring it in to the store today if you have one. When I gave people the cnet.com site, I gave it so people could read it and know only Apple had made the decision for Apple. And I suggested to some that an Apple reseller would probably stick with their own return policy.
    Because Arnie had just bought his, he should be able to return it to Apple or an ARS because an ARS has to have some kind of full refund or at least return for credit within 7 or 14 days of purchase.
    Hope this helps.

  • I am trying to use Adobe Color and the screen won't load

    I am trying to use Adobe Color and the screen won't load. All I get is the 4 spinning squares in the center of the screen. I Am using a Mac. Any help would be much appreciated.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to Settings>Store and sign out and sign back in.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.

  • I have an old iPhone 3Gs with software version 4.3.5,  I am trying to use it again, and it works fine, but I have not been able to update the software.  Every time I try, I get the following message: "there was a problem downloading the software for the i

    I have an old iPhone 3Gs with software version 4.3.5,  I am trying to use it again, and it works fine, but I have not been able to update the software.  Every time I try, I get the following message:
    "there was a problem downloading the software for the iPhone, the network connection could not be established".  This happens even though I have a working internet connection.
    Besides that, all the other functions work properly, even synchronize apps and library.
    Will I be able to update the software?

    look around the forum tons of people repport that they can't update
    makes you suspect that apples update servers can't meet the depand of too many users
    trying to update at once

  • I am trying to use macro express and adobe acrobat 9 profession keeps shutting down, why is this happening?  I tried to run as administrator already as well on both Macro Express and in Adobe and it still keeps shutting down.

    I am trying to use macro express and adobe acrobat 9 profession keeps shutting down, why is this happening?  I tried to run as administrator already as well on both Macro Express and in Adobe and it still keeps shutting down.

    same problem, it's been happening to me for a week or two now i'm thinking about backing up my documents and just wiping it completely, see if that works. Has anyone else tried this? I'm loosing time and have already lost a good few hours of work as it just crashes randomly. need help!!!
    - saving these threads on my favourites cause i'm about to crash . . .

  • So I just bought a used MacBook from Amazon with OSX 10.5.8.  I am trying to install new software and operating system, but I don't have the passwords to the Users set up in the computer.  What do I do?

    So I just bought a used MacBook from Amazon with OSX 10.5.8.  I am trying to install new software and operating system, but I don't have the passwords to the Users set up in the computer.  What do I do?

    Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
    When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Reset Password. After resetting the password use Startup Disk from the same menu to choose your hard drive for startup and restart.

  • I'm new to Mac and the program/all called Numbers. I'm trying to use both Average and small in the same formula. What's I'm trying to do is take 20 cells, find the 10 lowest numbers, then get the average and after that multiply it by .96

    I'm new to Mac and the program/all called Numbers. I'm trying to use both Average and small in the same formula. What's I'm trying to do is take 20 cells in a column,  find the 10 lowest numbers, then get the average and after that multiply it by .96  I used to use Excel and the formula worked fine in that. Here is my Formula
    =(average(small(H201:H220,{1,2,3,4,5,6,7,8,9,10})))*.96
    This formula worked in Excel and when I converted my spreadsheet over to Numbers, this formula no longer works.
    The best that I have been able to do so far is use small in 10 different cells, then get the average of the 10 cells and finally multiply that average by .96  So instead of using 1 cell, I'm using 12 cells to get my answer.
    This is a formula that I will be using all the time. The next cell would be =(average(small(H202:H221,{1,2,3,4,5,6,7,8,9,10})))*.96
    Hoping I explain myself well enough and that someone can help me.
    Thanks

    You can still do it in one cell but it will be more unruly than the Excel array formula.
    =average(small(H201:H220,1),small(H201:H220,2),small(H201:H220,3),...,small(H201:H220,10))*0.96
    where you would, of course, replace the "..." with the remaining six SMALL functions.

  • I have not used my CS3 version for about 3-4 years.  I tried to use it recently and I get a message about activation.  Called the phone number recommended but no longer in use.  How do I start using MY version I paid for?  Using PC

    I have not used my CS3 version for about 3-4 years.  I tried to use it recently and I get a message about activation.  Called the phone number recommended but no longer in use.  How do I start using MY version I paid for?  Using PC

    Can you activate CS3. If you lost your serial you can retrieve it from Adobe.com. Sign in at Adobe.com the use this link https://www.adobe.com/account/my-products-services.html When your Adobe Product list is displayed click on your CS3 product your serial number should be displayed.

  • I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

    I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

    After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
    Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
    iTunes: Restoring iOS software - Support - Apple

  • I am trying to use IMAQ acquire and other IMAQ functions with Queue functions.

    i am trying to use IMAQ acquire and other IMAQ functions with Queue functions.
    i mean i would like to acquire the image in a queue and deque it afterwards. would be the queue function accept the IMAQ data type?

    Refer posting, http://exchange.ni.com/servlet/Redirect?id=8879554

  • I'm using CS6 created a new document. trying to use my layers and my work keeps going black. when I

    I'm using Photoshop CS6, created a new document. trying to use my layers and my work keeps going black. when I click on the workspace  i am able to see my work but when I move my mouse any little bit it goes black again.

    Good day!
    Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?
    Regards,
    Pfaffenbichler

  • Firefox sent an update but it wouldn't download because it said it came through an e mail improperly coded or tried to use adobe acrobat and that doesn't work. what do I do

    firefox sent an update to my imac but I couldn't download it because it said it came through an email improperly coded or tried to use adobe acrobat and that doesn't work. what do I do??

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
     Cheers, Tom

Maybe you are looking for