Fcode for Minimize/Maximize is 'ENTER' when we go thru WEB Gui
Hi,
We are Upgrading our System from 4.6c to ECC 6.0. We are facing a strange error actually. When we go through the application in SAP GUI Mode , the screen Minimize / Maximize is working fine. But when we go through Web Gui, This scrren Minimize/Maximize is picking the Function code 'ENTER' as a result of which on every min/max , it is navigating to the next tab section (same functionality for Enter Button). Ideally it should not navigate to the next tab section, instead should remain in the same tab.
Please suggest how to resolve this issue.
Thanks
The reason we recommend using 8.8.8.8 and 8.8.4.4 for the DNS server is because they work when ISP assigned DNS servers do not. The DNS server assigned to you by your ISP is not able to resolve the domain for web services, therefore not allowing the printer to connect.
I assure you that it is with your ISP's DNS server and not the printer. If you were to take the printer back to the store and get a replacement, you would have the same issue, unless you changed the DNS. Same goes for any of our web service enabled printers.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
Similar Messages
-
Item ID for Minimize, Maximize button at system form title bar
Hi,
Can anyone help me out finding Item ID for Minimize, Maximize and close buttons at system form title bar (Left side Title of form and right side three buttons). I need ID for these items, if anyone knows please reply. will appreciate help on same.
Thanks,
JayI'm tryin to get over with Item master screen strech machenism. I've Added matrix at pane 6 and position is not fixed when ever form is rezised or base product font size is changed. I've alredy tried providing values to top left width height through oexisting item vaues, I'm not using any integer value. Let me know if i can freez it's position ....... Sample code below
oExistingItem = oForm.Items.Item("174")
oItem = oForm.Items.Add("mtx_MFGALS", SAPbouiCOM.BoFormItemTypes.it_MATRIX)
oItem.Top = oExistingItem.Top + oExistingItem.Height + oExistingItem.Height
oItem.Width = oExistingItem.Width + oExistingItem.Width
oItem.Height = oExistingItem.Width
oItem.Left = oExistingItem.Left
oItem.FromPane = "6"
oItem.ToPane = "6"
oMatrix = oItem.Specific
oMatrix.Columns.Add("Col0", SAPbouiCOM.BoFormItemTypes.it_EDIT)
oMatrix.Columns.Item("Col0").TitleObject.Caption = "Line #"
oMatrix.Columns.Add("Col1", SAPbouiCOM.BoFormItemTypes.it_EDIT)
oMatrix.Columns.Item("Col1").TitleObject.Caption = "Name"
oMatrix.AutoResizeColumns()
Regards,
Jay -
Menu UID for Minimize/Maximize/Close buttons
I'm trying to disable or restrict the buttons in the toolbar at the top of marketing documents. Specifically, I'm trying to disable the 'X' button in the top right of marketing documents to prevent users from closing the document in this way. I was able to restrict the 'Close' function found under File->Close because it clearly has Menu UID 514. However, this didn't affect the 'X' button. Do these buttons have their own Menu UID's? Are they on the same form as the marketing document itself? Thanks for the help.
Hi Brian,
With regards to the X box, I don't think it has a UID and it doesn't trigger a menu option. The screen can also be closed by pressing Escape or Ctrl-F4 and they also don't trigger a menu option (although they do trigger a KeyDownevent).
When I've needed to do this then I've added a hidden UserDataSource field to the window which takes a simple Y/N value with the default being N when the form is loaded. I then put a check in the Form Close event (when before action is true) and if the value in this user defined field is N then I set bubbleevent to false and the form won't close. Only if the user chooses one of the methods I want them to use (Ie clicking on the OK button when the form is in OK mode or clicking on the Cancel button) do I set the user datasource to Y which allows the form to close (the press event of the buttons occurs first before the form closes so the value in the user datasource is set to Y just before the form close event checks its value).
Kind Regards,
Owen -
Fix for "Not Connected" Error Messages When Trying to Access Web Services
If you run across an error message on your printer stating that it is "Not Connected" when trying to access ePrint or your Apps, but you know it is connected to the internet, it probably just means that the printer is not connecting to the server properly.
Here is the first set of steps I would try, since they seem to resolve this issue half of the time.
The first thing I would try in this situation is a network reboot.
First, disconnect the power cord from the back of your router.
Next disconnect the power cord from either the back of the printer or the wall, without powering it off first.
Wait about 30 seconds and reconnect the power cord to your router.
Wait about another 30 seconds and plug the printer back in. It should boot back up automatically, but if it doesn't go ahead and press the power button.
Once everything is back up and running, try to access ePrint or your Apps.
If those steps don't work for you, the next thing would be setting a Static IP & DNS for the printer. Before doing this, you want to print off a network configuration page. It varies from model to model, but it is usually found under the Wireless Settings or under Reports in the Setup menu. After you have that page, follow these steps.
Before we start, we need a network configuration page with your current connection settings. To get this, press the wireless button on the front of your printer and then press "Print Info" or "Print Report". This will print off a network configuration page, which has information on it that we need to complete the next few steps.
After you have that, we will need to access the printers Embedded Web Server (EWS). You can do so by entering the printers IP address (from the network configuration page) into your browsers address bar and pressing enter.
Once there, press the "Network" tab at the top of the page. From there you will want to click the "IPv4" button, located on the lef-hand side of the page. It will be there for WIreless and Wired, so make sure to click the one for you however you are connected. If you do not see "IPv4", you should see "Networking", press that and then press "Network Address(IP)".
Next, you will want to click the small round button next to "Manual IP Address" and then fill in the boxes for IP Address, Subnet Mask, and Default Gateway, using the information found on the network configuration page.
For the Primary or Preffered DNS Server, you will want to enter 8.8.8.8.
For the Secondary or Alternate DNS Server, you will want to enter 8.8.4.4.
Click apply and when the message pops up saying that the changes have been applied, press "OK".
Press the power button on your printer, wait for it to fully power off and then press it again to power it back on.
After doing this, go ahead and try to enable ePrint again.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
This question was solved.
View Solution.The reason we recommend using 8.8.8.8 and 8.8.4.4 for the DNS server is because they work when ISP assigned DNS servers do not. The DNS server assigned to you by your ISP is not able to resolve the domain for web services, therefore not allowing the printer to connect.
I assure you that it is with your ISP's DNS server and not the printer. If you were to take the printer back to the store and get a replacement, you would have the same issue, unless you changed the DNS. Same goes for any of our web service enabled printers.
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
When debugging, a for loop is not entered even though the number 6 is passed to "N".
I cannot figure out why a for loop is not entered when I debug it. When debugging a value of 6 is clearly passed to "N", the number of iterations the loop is supposed to execute. So when I debug, execution highlighting just parses right over the loop, even though I request to enter the loop. Everything inside of the loop is not executed. Have you experienced this before? - Any ideas?
As mentioned by "eh" auto-indexed arrays that are empty will cause this.
A "FOR loop" will itereate as many times as is indicated by the smallest number elements in any of its auto-indexed inputs.
When you watch it in execution-highlighting, you probably will see a "0" coming in on an auto-indexed input.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
After automatically updating to version 20.0.1 yesterday the buttons in the upper right corner minimize, maximize, close stop working when I open a new tab. When only one tab is open they do work. Also when downloading a file ( and again this opens a new pop-up window ) after clicking save file there is no response. The save file button looks as if it is pushed but there is no download going on.
I tried safe mode, didn't help.
I tried switching off all add-ons, didn't help.
I tried reset, didn't help.
I even tried uninstalling and re-installing firefox, didn't help.
The only thing that works for a couple of seconds is when I go to options in the firefox menu, close the pop-up the buttons in the upper corner are active for a couple of seconds.Hello,
I kept searching a solution for this problem and I found that: https://support.mozilla.org/en-US/questions/956417
You just have to update the Add-on Firebug from 1.10.6 to the latest version 1.11.2. If it's not that Add-on try with another Add-on. -
I tried downloading a free app and it asked for my billing information and when I entered it, it said that there was a billing problem with a previous purchase and I have to update it. I keep updating it and it wont let me verify it and I cant get any apps even if they are free, and I just Deleted some apps to make room for my new upate!
The message says: "The payment method has been denied, try another method"
I'm living in the same country and city since I was born, so I don't think the location is the problem.
And yes, I paid with the card a meal in Burguer King today. And nothing more. -
I am a Creative Cloud subscriber and Acrobat XI Pro is asking for a serial number. When I enter my CC serial number, it indicates that the serial number is invalid
>enter my CC serial number
I don't know how that is possible, since Cloud accounts do not use a serial number... you download & install & activate Cloud programs with your Cloud log in to your paid account
Ask for serial number http://forums.adobe.com/thread/1234635 has a FAQ link
http://www.adobe.com/products/creativecloud/faq.html
http://helpx.adobe.com/creative-cloud/help/install-apps.html
http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
what is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
Cloud Getting Started https://helpx.adobe.com/creative-cloud/topics/getting-started.html
-Install, update or UNinstall, and launch after installing -
Mail returns to 'main menu/desktop'. My mail worked for over a year - now when i enter mail it returns to the 'mail menu' immediately. I disconnected wireless connection and it still returns to the main menu immediately. PLEASE HELP!
- Have you tried resetting your iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Can you access the mail account(s) on another device and look for a problem email that may be causing the problem
- You could try deleting account(s) and recreating them -
having problem buying online.need your help since it's my first time here.apple is asking for my billing address but when i enter my address here in qatar,it's saying i should enter a valid zip code within the u.s.does it mean i can't buy online even if it wil be shipped within u.s. only?
To buy in for delivery in Qatar, you should be starting from the Apple Qatar site:
http://www.apple.com/qa/
Do you have an Apple-ID? if you do, then you should not have to enter your Address again, and may be able to sidestep the US Zip Code issue. -
I purchased and downloaded Lightroom 5.5. After installing it, I was prompted for the serial number. When I entered it an error message appeared saying it was an upgrade serial number and I need to enter my original purchase number. This was my original purchase, not an upgrade. Now what do I do?
It sounds like you bought an upgrade from Adobe. How much did you pay? The upgrade is about $80, and the non-upgrade is about $150. If you bought an upgrade version and had no previous version, you would see what you're seeing.
If that is the case and I were you, I'd call Adobe, and arrange for a refund and to order the correct version.
Hal -
I am trying to update my apps but it is asking for my card details and when i enter them it says my card was declined but i havent bought anything, can i see what the purchase is for?
Again, Apps will always be tied to the account from which they were purchased and will always have to be updated using that account.
Always, mean exactly that, always.
If you want them to be on your account then you need to buy them using your account. -
Hi, I forgot my icloud password and my ipodtouch keeps asking me for my icloud password. When I enter my apple ID password, it will not accept it. I have been trying to find where I can reset my icloud password with no success. Please can someone help?
You reset the iClould password the same way you reset the Apple ID for the email address/account
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information. -
Im trying to register my applecare protection plan for my iphone 4 but when i enter my reg numbers for the plan and my phone im told that there is no sevice in that area can anyone help Please ?
Try this https://expresslane.apple.com/GetproductgroupList.action
-
IOS7...Azerbaijan (+994) missed as location (??!!) for imessage and FaceTime? When you enter to "change location", no Azerbaijan amongs the region?!!
+994 phone number is disappeared !!!Why no one from Apple support team still didn't replied to this question? It is really problem for Apple Azerbaijan users which I'm pretty sure are more than above mentioned two countries.
I hope Apple support team will investigate and find the solution for this problem and satisfy Apple users in Azerbaijan.
Maybe you are looking for
-
When I was working with my old job I had a contact list on my phone that was associated with my job's personal email address. Now that I have a new mac and am now a new full time student I would like to use my new uni email address as my default cont
-
Unable to create a file in Application Server using OPEN DATASET stattement.
I am unable to create a file in Application Server using the following statement. OPEN DATASET filename FOR OUTPUT IN TEXT MODE ENCODING DEFAULT MESSAGE msg. The message I'm getting is "Permission Denied". I have checked authorisation using SU53 whic
-
I have an old file with an .A4P video from 1999. I don't own any Adobe products (and don't really want to buy any). I just want to be able to convert the file to something that I can actually view. Any help? I was a kid when I made a documentary for
-
I have a 64 gig second gen iPad mini that I updated to iOS 8.2 yesterday with no initial problems. You're probably thinking all's good right? Wrong. All was good until about an hour ago. When I saw a text notification on the lock screen I swiped righ
-
Deleting JAR Creation on JBuilder
I used the Archive Wizard on JBuilder to create some archives that are created during building. But now I want to stop one from being created, how do I do it??? JBuilder doesn't seem to offer any way of keeping track of archives after you set one up.