FCP Project to Adobe Flash

I've been asked to provide a completed FCP project to a web administrator who operates only in Adobe Flash. Mine is a 720p 16:9 project -- his environment is 4:3 sometimes as dial-up speeds. :--(
Should I deliver just a Quicktime file? Should I deliver my project via Compressor in H.264? Best suggestions, please. Thanks very much.

David:
For Flash Video (at least up to version 8), developers have to compress to Flash standards. Usually that's OnV2, or Sorenson Spark. I think 9 and 10 have newer compressions and even HD. I'm not sure if it's h.264 as I work in Flash 8.
Either way, it'll work best with the best master you can give. So, if you have a DVCPROHD, HDV, or whatever file you can give him it'll look best when he imports/compresses the file for Flash. You would do this through the "export quicktime" command rather than "export using quicktime conversion" command in the export menu. Make sure he resizes it upon import and not in his flash project. You can import and resize to fit your project. If you resize it using the "transform" tool in Flash it can tend to get jagged. Flash doesn't seem to "soften" video you change dimensions on with the "transform" tool, but it does if you resize while compressing.
Another option, to keep the transit size down, is to compress it to flash for him. But, that'd require Flash on your system. Not sure if you have it, but you can export it via quicktime if you do. The new file will have a .flv extension and he can simply import that to the Flash library for his project.
Hope that helps.

Similar Messages

How to recover deleted projects in adobe flash builder 4.5 for PHP

Hi
Problem:I accidently deleted project in adobe flash builder 4.5 for PHP and in confirming dialogue box,i checked delete contents one(see figure).
I have wasted almost 6 hours and googled almost everything but couldn't find solution.
I have also used data recovery software like Get Data:Recover my deleted files.It found all my deleted files which was deleted by me pressing Shift+Del,but it didn't displayed files which i wanted(since they were deleted by Adobe flash builder).
Any help would be welcomed as that project was so important for me.

Thanks for your solution but in mine it saying,There are no previous versions found.
I have used almost 6 recovery software paid and free and didn't intstalled on that drive where my original files are located so that it don't get overwritten.
All of them are able to recover some files like
.project
public/bin-debug folder
.settings folder
But my .php files i located in web root folder.Those file by i connect data/services. I mean PHP project files are deleted.
I had following structure of files
<Web root > php scritps to connect data\services\UserService.php                  (this file)
<Web root > php scritps to connect data\services\EmployeeService.php          (this file)
<Web root > php scritps to connect data\test\test.php                                    (this file)
<Web root > php scritps to connect data\Imp files to connect data using PHP and MySql.txt (this file)
Files marked by "this files " are lost and not found by any recovery software.
I need those php and txt files specifically.

I was trying to open a project in adobe flash pro cc and it said there was an error opening the project. I have tried multiple times with no success, however all my other projects open and work fine

I tried multiple times, but still couldn't open my project. All my other projects open and work fine. Please help, it is important.

You will most likely get better help in Flash Professional
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

My Adobe Flash disappeared from my pc and not my program Flash! Helppp

This question is Not Answered.
Good Morning,
That I do not really remember or look for a solution, so I tell myself that it is perhaps a forum that I did find ..
I work on a project with Adobe Flash CS4, consist of several sequences with animation, script, sound ect.
Yesterday I try to Launch the movie and I got around to indicate a message saying: That I was unable to load all the sequences,'' then'' that my file had been damaged''
Following this I was worried and I was getting a check in my paper to see if my file was still there, and although it's not as if he estab delete it, it does not appear anywhere in my pc, put in my flash off is to remain open and on which I can still modify items so that is not blocked.
Now he tells me to reinstall Flash ..
Is that if I close Adobe Flash, will I lose my project?
It has been two and a half months I'm on it and I must make my exam tomorrow ..
Big panic, if you know give me a pipe or anything Thank you in advance!

There may be a problem with your project file(s), or there may be a problem with Flash. Your project files are stored outside of the Flash application. The original saved Flash files will have an extension of .fla. You should be able to search your computer for that file extension. If you are using separate Actionscript files, those files will have an extension of .as. You can also search for those files, if you think that you have any.
Before you reinstall Flash, read all of the information about reinstalling Flash at Adobe's web site.

Insert image from file in Adobe Flash AS2

Hello!
I am working on one project in Adobe Flash AS2 and I would like to know, is it possible to create such button in the flash movie, that when is pressed on, opens a file browser for the computer. After that, the user chooses an image to insert in the flash movie. And the image changes from the old one (apple) to the new one (flower).
For better understanding I added pictures. I hope You understand what I mean..
I have searched in web how to do this, but no success at all..Hoping on Your advice. Thanks!!!

Update - I tried using the loadMovie() function and it works, but not exactly as I was imagining. To be more precise with my planned option I will give this example for better understanding :
Lets say, that I make a Flash project for other users who have no programming skills. In this project (the swf movie) there is a place(a button "Insert image")
to upload an image and save it to the swf file, but it can't be done through typing the image URL in the actionscript (like doing an actual coding), but simply by opening the file browser in computer within the swf file.
I hope You understand what I mean.
I would like to know is this option even possible in Adobe Flash AS2
I am thankful for Your replies and advices.

How to display html content with image in Adobe Flash and Flex mobile project?

Hi,
I have a html content with image in it. How to display it in Adobe Flash Builder and Flex mobile project? Which control needs to be used for this?

Hello,
The only current way is to use an iFrame, or if you only need some html tags you could use the Text Layout Framework.
Here this is the iFrame approach:
http://code.google.com/p/flex-iframe/
If the swc do not work in Flex4 just use its ource code which works...
...it is basically based on this:
http://www.deitte.com/archives/2008/07/dont_use_iframe.htm
see also and vote, please:
http://bugs.adobe.com/jira/browse/SDK-12291
http://bugs.adobe.com/jira/browse/SDK-13740
Regards
Marc

Exporting 16:9 Project to 4:3 Adobe Flash Video

Hello,
I have a 16:9 Video Project.
I'd like to export some of my sequences via the Adobe Media Encoder to Adobe Flash Video - 4:3 format.
I've tried using a Widescreen Flash Preset and then cropping the footage - however the footage must be getting distorted because the video gets a lot of lines in it when there's even a minimum amount of motion - with bitrate set to 500.
Any suggestions on how to export 16:9 project o 4:3 flash video without distorting the video? What if I want to export to 240 x 180 as opposed to 320 x 240? I'm not sure how the math really works for 16:9 to 4:3 to square pixel conversions.

Well, Chaunce, there you have it: Two differing viewpoints. Most of the output I do is for 4:3 square-pixel reduced size computer playback. Suffice it to say I have not been entirely satisfied with Premiere's handling of such a seemingly simple task.
Deinterlacing is an inherently lossy process. Even the best deinterlacers can't do it perfectly. So, I certainly cannot say that this is "lossless". Granted, scaling to such a small size as 240x180 will likely hide some of the adverse effects of poor deinterlacing.
I am also not particularly pleased with the way Premiere scales video. Large ratio scaling (like 720x480 -> 240x180) looks way too soft for my taste. Sadly Adobe does not implement better scaling algorithims (such as Lanczos) for resizing. It can really help preserve detail when downscaling video and images.
Premiere (and all the Adobe products) use approximated pixel aspect ratios. You may find that these produce slight stretching or squeezing of your footage when converted. It may not be problematic, but it is not "correct", strictly speaking.
For these reasons, I use Premiere strictly for editing and I have found alternative tools for preparing content for PC playback. I am hoping that Adobe will continue to make improvements in these areas.
-- Dan

How to easily get an Adobe Flash CS5.5 Professional project into Flash Builder 4.5?

Hey all,
I am new and trying to do the following, can you please guide/help me do it:
I have a video chat application that is done on Adobe Flash CS5.5. I had the problem of "echo" so I wanted to use "getEnhancedMicrophone()". When I replaced "getMicrophone()" with "getEnhancedMicrophone()", Adobe Flash CS5.5 Professional didn't recognize it. I knew I need Flex, so I installed Flash Builder. And then got lost. What I simply want is just import my "FLA" file (or if I need to convert it to something else using a specific tool, let me know.. I have Adobe Flash CS5.5 Professional and can install other required applications if needed) done on Adobe CS5.5, into Flash Builder, and then "support Flex" so that I compile with the flash-version argument required.
I am totally new to MXML and Flash Builder, and even Flex. I don't know how to import a FLA and add "Flex" libraries into it simply to make "getEnhancedMicrophone()" work without the need to recreate the whole thing on Flash Builder. Can you guide me please? The output is for a web SWF file, not a desktop application.
Thanks!

I have the same problem here. I'm trying to do a stick animation on cs6, but to be more precise, i need to actually draw with a larger brush size. I suggest using the pen tool with the smooth option on. You can't see exactly where the stroke will be, but its better than nothing, and it more or less acts like the brush anyway.

FCP Project To The Web

I am trying to export a project from FCP to be viewed online
It will be upload it to an online web site: Blip.TV
I think they are converting it to a flash movie file > a file with extension. .flv
How do you suggest I’ll save/convert my project?
Thank you,
~ Grace

If your are uploading to blip then you should find out from them how they want your file. If they are converting it to .flv (Flash Video) then they will want one thing (don;t know exactly what), but if they need an .flv file then you will need to use either Macromedia/Adobe Flash 8 or you will need to buy Sorenson Squeeze in order to compress it to .flv.
Check with Blip, each of these video sharing sites have different requirements.
K

Error while running Adobe Flash Islands in ABAP Web dynpro

Hi All,
I am new to Adobe flash Islands. I am trying with simple examples. I have downloaded SDK and Flash Builder from Adobe.com
I have build the flex project and imported as MIME in WD and integrated into it. If i see the design of the flex project in Flash Builder all seems ok. However, when i run my WD i am facing below error.
TypeError: Error #1006: getCurrent is not a function.
     at sap::FlashIsland$cinit()
     at global$init()
     at Labelisland/initApp()
     at Labelisland/___Labelisland_Application1_initialize()
     at flash.events::EventDispatcher/dispatchEventFunction()
     at flash.events::EventDispatcher/dispatchEvent()
     at mx.core::UIComponent/dispatchEvent()
     at mx.core::UIComponent/set processedDescriptors()
     at mx.core::Container/createComponentsFromDescriptors()
     at mx.core::Container/createChildren()
     at mx.core::UIComponent/initialize()
     at mx.core::Container/initialize()
     at mx.core::Application/initialize()
     at Labelisland/initialize()
     at mx.managers.systemClasses::ChildManager/childAdded()
     at mx.managers.systemClasses::ChildManager/initializeTopLevelWindow()
     at mx.managers::SystemManager/initializeTopLevelWindow()
     at mx.managers::SystemManager/http://www.adobe.com/2006/flex/mx/internal::kickOff()
     at mx.managers::SystemManager/http://www.adobe.com/2006/flex/mx/internal::preloader_completeHandler()
     at flash.events::EventDispatcher/dispatchEventFunction()
     at flash.events::EventDispatcher/dispatchEvent()
     at mx.preloaders::Preloader/timerHandler()
     at flash.utils::Timer/_timerDispatch()
     at flash.utils::Timer/tick()
I tried couple of examples, all ending with same error and flash component is not getting displayed at runtime.
Hope some one helps me. Thanks in advance.

Hello,
See Note: https://service.sap.com/sap/support/notes/1312542
Flex SDK 3.4 and higher is not supported as documented.
You should use Flex SDK 3.3 to build Web dynpro FlashIslands.
Hope this helps!
Thanks,
Srilatha

Adobe Flash Player/Shockwave is not running on FireFox... does not run in Youtube, or other video sites.

Hmmm... this morning I was watching youtube videos.. and I noticed a little lag. Really minor... but thought that shouldn't be happening.? So decided to see if I could fix it. Not sure what I did or if I did anything to cause this? I really don't think so. Maybe firefox.exe -p?? Was working fine up until today?
I've read a bunch of the forums and tried a bunch of stuff but still no go. When I disable protected mode it works fine, but I want protected mode to be enabled so that I'm... well... 'protected!'
I've uninstalled FireFox and Flash Player and reinstalled numerous times but still same thing.
I'm running Windows 8.1, with most recent Flash and FireFox. My computer is an i7 4700HQ 2.4 Ghz, 12 GB Ram etc... its a 6 month laptop.
Anyone know what the issue is? I've never experienced anything like it? I've ran Malaware bytes.. didn't find anything. Ran AVG and found one threat... I think it was the Crack threat (cockos??) does that ring a bell...? came from a torrent. That issue has been healed now tho.. not sure if they are related??
Also ran a disc cleanup and it took about 5 minutes... doesn't usually take that long but its all clean now. Deleted a bunch of debug dump files... again, not sure if that's related??
Here are a few of the crash error logs I've gotten recently:
bp-7e266393-2fd8-447c-8a0e-7299b2150426 2015-04-26 12:32 AM
bp-29ac358f-9463-4379-9fc1-19a8b2150426 2015-04-25 10:50 PM
bp-7d9929e7-42df-425b-a549-b4aa42150426 2015-04-25 9:13 PM
Anyways, I would like to still use Flash but its killing me right now trying to figure out whats going on. Would really appreciate some help/advice. Let me know if you need more info.
Cheers!

Some background information about the Adobe Flash Protected Mode for '''''christ1'''.
http://blogs.adobe.com/security/2012/06/inside-flash-player-protected-mode-for-firefox.html
Intel(R) HD Graphics 4600 that you have is a relatively low end graphics card and low end for on-board graphics chips, whichever you have. ''Unless that is a laptop that switches drivers for "gaming" which puts a lot more load on the hardware and runs the battery out a lot faster.'' Technically the HD 4600 ''should'' be enough for web browsing, but Flash is a lot more than simple web browsing.
IMO, if disabling the Flash Protected Mode solves that issue - do that. Or upgrade your hardware, especially if you have a separate Graphics Card ''[vs an on-board chip]'' or can install a better card in a desktop computer.
As far as YouTube videos goes, have you tried using the HTML5 setting for YouTube?
https://www.youtube.com/html5
Make that setting and Google will deliver HTML5 video when it is available for each "clip". From what I have seen ''[I'm not a big user of YouTube, though]'', like maybe 75% of the clips I see are available in HTML5 - ''ymmv''.
BTW, Mozilla is working on eliminating the need for even having to use Flash. They're working a a project which is code-named Shumway to play SWF-format files.
http://mozilla.github.io/shumway/
You can download it from that page, but it is at the early stages of development and needs a lot more work before it is truly usable.

I have a MacBook Pro , Model Identifier MacBook Pro8,2 , MAC OX S 10.7.4 I noticed that if I open Final Cut Projects created on other/older models MacBook Pro Laptops or MacPro Desktops, the fonts used in the previously created FCP projects, change their

I have a MacBook Pro , Model Identifier MacBook Pro8,2 , MAC OX S 10.7.4
I noticed that if I open Final Cut Projects created on other/older models MacBook Pro Laptops or MacPro Desktops, the fonts used in the previously created FCP projects, change their font spacing! which distorts the look of the Text that was written, by oevrlapping on other things that were put & present on the screen.. Another similar probelm is that the Vector shaped used for example to highlight certain words or shapes, also change their position on the screen so that they no longer highlight exact things that we once used these vectors to highlight or outline... Anyone knows how to solve this problem please?? I made sure that the same fonts are available in the Library in both old and newer computers...
thanks in advance..

You might want to take your question to the FCP forum - if you copied all fonts to your Library>Fonts folder and restarted they should be recognized by all applications. I know that this works for Adobe products, anyway.
Clinton

Can't install portfolio sdk in adobe flash builder 4.7

Hi all,
as a CC member I installed acrobat XI Pro, Adobe Flash Builder 4.7.
I would like to create a new Portfolio layout but it seems impossible to me.
I already followed the instruction provided by adobe: https://learn.adobe.com/wiki/display/PDFNAV/Installing+Acrobat+Portfolios+SDK but nothing happens.
This page seems outdated. How can you work this way?
Here is what I have done (windows 7 64bit):
I copied the "AcroFlashDebug.api" file in "C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins"
I copied the "Put contents in FB plugins dir" content in "C:\Program Files\Adobe\Adobe Flash Builder 4.7 (64 Bit)"
I also copied the "Put contents in FB plugins dir" content in "C:\Program Files\Adobe\Adobe Flash Builder 4.7 (64 Bit)\eclipse"
I copied the "Put contents in FB plugins dir" content in "C:\Program Files\Adobe\Adobe Flash Builder 4.7 (64 Bit)\plugins" (please note I created the "plugins" directory manually)
I also copied the "Put contents in FB plugins dir" content in "C:\Program Files\Adobe\Adobe Flash Builder 4.7 (64 Bit)\eclipse\plugins"
but now?
I started FB 4.7 but there no mention about navigator projects or portfolio.
What I'm missing here?
Is there an updated step-by-step tutorial?
TIA for any help.
tony

The question of whether plug-ins are 64-bit or 32-bit is a vital one, and has been a pain for every app I've seen which has gone 64-bit. Maybe you'll need to install the 32-bit Flash Builder, but that's just a wild guess. This part of the issue seems specific to Flash Builder, so I recommend you try that forum.

FCP Projects Converted To .m2v In Compressor Are Not Accepted ?

Normally I export my FCP projects as QuickTime Movies and drop them into iDVD 08.
I have just exported to Compressor and ended up with a .m2v and a .ac3 file which work in Toast and DVD Studio Pro but cannot be dropped into the iDVD window.
They jump straight out !
I have also tried importing them via the File menu with no success.
What am I doing wrong ?
I have just searched the iDVD Help menu again and discovered this:-
"MPEG-1 or MPEG-2 files, QuickTime VR movies, and movies with sprite or Flash tracks cannot be added".
Does that mean that my .m2v files (which I believe are MPEG-2) will not work and the best I can do is to export from FCP as QT Movie ?
Message was edited by: Ian R. Brown

That is what it means. iDVD will not accept pre-encoded files. However, I would be curious to know why you would want to use iDVD when you have and know how to use DVD Studio Pro? IMHO, on big disadvantage to iDVD is that it doesn't use AC3 or compressed audio, it uses uncompressed PCM.
Mike

[Apps] Name Card Application developed using Adobe AIR and Adobe Flash Lite

An University student currently undergoing his research
project had developed this application in order to help him with
his research project. Please kindly try the application and take
the survey form provided at the bottom of this message.
This application allows you to store name card details. The
application compromise of both PC (Windows / Mac) and a mobile
phone component. Users will be entering the name cards information
using the PC component and he will be sending it to the phone. The
phone component will read the data created by the user and display
it accordingly.
This application requires Adobe AIR and Adobe Flash Lite to
work.
Please click on the following URL for more information.
http://www.pda4x.com/read.php?tid=68835
Note: I sincerely hope that the Administrator will not delete
this message.

Great Job!

FCP Project to Adobe Flash

Similar Messages

Maybe you are looking for