FDM error message

Hi,
when I am trying to logged in into FDM it is showing me error as
Application error
An exception occurred during the execution of the current web request. Please contact the administrator to review the stack trace in the event log for more information about the error.
Can anyonre please help me out

Yes, it is creating the primary export file. It is actually loading the data... We are receiving the error message detailed in the original post and it is not creating the a, b, or c file. We have not modified any of the Action script code. The action script is the same between a functioning and non-functioning application.

Similar Messages

Data import from EBS failed via FDMEE in fdm . Getting error message as "Error connecting to AIF URL.

FDM Data import from EBS failed via FDMEE after roll back the 11.1.2.3.500 patch . Getting below error message in ERPI Adapter log.
*** clsGetFinData.fExecuteDataRule @ 2/18/2015 5:36:17 AM ***
PeriodKey = 5/31/2013 12:00:00 AM
PriorPeriodKey = 4/30/2013 12:00:00 AM
Rule Name = 6001
Execution Mode = FULLREFRESH
System.Runtime.InteropServices.COMException (0x80040209): Error connecting to AIF URL.
at Oracle.Erpi.ErpiFdmCommon.ExecuteRule(String userName, String ssoToken, String ruleName, String executionMode, String priorPeriodKey, String periodKey, String& loadId)
at fdmERPIfinE1.clsGetFinData.fExecuteDataRule(String strERPIUserID, String strDataRuleName, String strExecutionMode, String strPeriodKey, String strPriorPeriodKey)
Any help Please?
Thanks

Hi
Getting this error in ErpiIntergrator0.log . ODI session ID were not generated in ODI / FDMEE. If I import from FDMEE its importing data from EBS.
<[ServletContext@809342788[app:AIF module:aif path:/aif spec-version:2.5 version:11.1.2.0]] Servlet failed with Exception
java.lang.RuntimeException
at com.hyperion.aif.servlet.FDMRuleServlet.doPost(FDMRuleServlet.java:76)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

Error message while installing "FDM Web Application" on windows 64-bit

I am unable to install "FDM Web Application" on a 64-bit windows platform. I have an error message indicating that 64-bit components for HFM & EPMA cannot co-exist with 32-bit components for HSF/FDM. Is there a way to install it? From the packages I downloaded, I have installed EPMA 64-bit. So I presume I'll have to uninstall EPMA 64-bit and re-install EPMA 32-bit?
OS: Windows Server 2003 R2 Enterprise x64 Edition SP2
Oracle WebLogic 9.2 MP3 32-bit
Thanks in advance.
Kind regards,
Andy

Hi,
What version are you trying to install, as the latest release 11.1.1.3 should now support it.
In the 11.1.1.3 Readme - http://download.oracle.com/docs/cd/E12825_01/epm.111/readme/epm_1111300_readme.html
FDM now provides support for 32-bit binaries in a 64-bit environment. (though that was from version 11.1.1.1)
Though saying that FDM can only run in IIS32bit mode, if you have installed EPMA 64bit it will have set IIS to 64 bit, so uninstall 64bit and use 32bit.
FDM supports 64-bit servers running in 32-bit emulation mode only. Because IIS cannot run under 32-bit and 64-bit mode simultaneously on the same server, Financial Management and FDM Web components cannot be deployed on the same 64-bit server. All other components can be deployed together.
Cheers
John
http://john-goodwin.blogspot.com/

FDM : Error while checking Integration Settings

Hi,
I am in the process of setting up an FDM App (Version 9.3.1)) for loading data to Essbase.
I've Imported and Registered ES9X-G4-A Adaptor via Workbench. I've also added the Machine Profile.
When I try to test Integration Settings in the Web Client by 'Browsing for Target Value' in Maps, I get the following error:
ERROR:
Code......................................... 53
Description.................................. File not found: esbapin.DLL
At Line: 125
Procedure.................................... clsBlockProcessor.ActConnect
Component.................................... upsWBlockProcessorDM
Version...................................... 931
Thread....................................... 2668
For the moment, I have mapped only 2 Dimensions. The peculiar thing is if within any Dimension, I check the 'Use List' Box, I get the above error, during Integration Check.
But if I leave that box blank, I do NOT get an error, but only a 'No Items to display' box.
Am I missing any steps? My feeling is the Adaptor has not been configured correctly.
Kindly advise.
Regards,
Tejas.

Hi,
Thanks for that information.
It was indeed the issue. When I installed the client, I could proceed.
Now, I have a different issue. When I 'Export' data, I get the following error message.
ERROR:
Code......................................... 5
Description.................................. Invalid procedure call or argument
At Line: 523
Procedure.................................... clsBlockProcessor.ActExport
Component.................................... upsWBlockProcessorDM
Version...................................... 931
Thread....................................... 3884
Any idea what this is about?
Tejas.

FDM - Errors with Foreign Language Characters in Load Files

For our Netherlands data import file, our source account decriptions contain the character "ë". The account decription is not loaded to HFM, but we are receiving error messages when importing. Is there a way to ignore foreign language characters? Another post suggested "Administration", "Configuation Settings", "File Encoding Type" then set to "Unicode", but the version I am using does not have this option. Version is 11.1.1.3.
Thank you!
Melody

Hello Melody,
If you are using FDM v11.1.1.3.00 the file-encoding is defaulted to Unicode. It might be helpful to contact support.
It could be your DB isn't setup to handle unicode characters (in this event the information would be stored in the SQL*Loader or MSSQL Logs). It could also be the file you are trying to import actually isn't "unicode" but more of a local ANSI/ASCII format.
Most 'European' characters were supported in that release; and I know several clients that use it as expected.
Thank you,

FDM: Error retrieving audit intersection cell information

Hi,
Could anyone please tell me how to resolve an error we've been having?
When I right click in a cell in HFM with a view to using the Audit Intersection menu pick to review data uploaded using FDM, I see the error message "Error retrieving audit intersection cell information". Strangly, this works fine in our PPD environment, but we can't seem to get it working in Live even though the Drill-Back set up was copied across from PPD (with references to PPD changed to Live obviously)
Thanks in advance
Phil

Which Version of HFM are you on? I know that in 9.3.1 Classic, you must update the metadata between migrations to the specific application name of FDM, if you have the same FDM app name, this would not apply, but if they change, you will need to change the metadata between them. The FDM app name is defined in the Application Settings dimension of metadata.
JTF

FDM Error When Trying To Login from the Web

Hello,
We are on FDM 11.1.2.1 and all of a sudden this problem popped up and we're not entirely sure how to fix. When users go to the FDM URL they get the following three error messages:
1 of 3 Error: Primary Load Balance Server is unavailable -- attempting to use Backup Load Balance Server.
2 of 3 Error: Error retrieving security agent header.
Detail: InnerException1: Please run the Load Balance Config Manager and specify a username and password for DCOM.
InnerException2: Retrieving the COM class factory for component with CLSID {E652643D-6CC1-48AC-915D-01842B04F292} failed due to the following error: 80070005.
3 of 3 Error: Please run the Load Balance Config Manager and specify a username and password for DCOM.
Detail: InnerException1: Retrieving the COM class factory for component with CLSID {E652643D-6CC1-48AC-915D-01842B04F292} failed due to the following error: 80070005.
When logging in through the workbench we do not receive any error messages. Does anyone have any thoughts on what would cause this or how we can fix? Is it as simple as inputting the service account credentials again? Also, how do we prevent this from happening again in the future?
Thank you,
Jason

Check the FDM Load Balance Server DCOM Object {E652643D-6CC1-48AC-915D-01842B04F292} Security Tab. Verify that the only user accounts listed is the FDM Service Account and the only Groups listed as Everyone and SYSTEM. If there are any other user accounts listed, remove them from the list. This should be performed for "Launch and Activation Permissions" and "Access Permissions", Do not adjust "Configuration permisions".
Once you do this, re-set IIS by opening a command prompt and typing iisreset and hit enter. This will recycle the IIS Services.
Re-launch FDM.

Error Message When Adding New User

Hello,
We are on FDM 11.1.2.1.501 and today as I was going to add a new user in the system I got the below error message:
Error: Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index
After the error the usual user maintenance screen came up and I was able to add the users I needed to without any problems. Anyone have an idea what this error means? Just looking to prevent problems on down the road.
Also, there wasn't anything in the FDM error log nor in the windows event viewer on any of the servers.
Thanks in advance,
Jason

Oracle was able to provide a solution to this one. Somehow there was a disconnect between HSS and FDM so went into SS and deleted out the affected application. Then went onto the FDM web server and ran the user migration utility to reconnect that application with SS and now it works fine w/out the error message.

Windows Vista: Ipod Error Message, no longer read by PCs

Hello,
I have a 5th generation black ipod video with 30GB of memory.
The other day I hooked it up to my laptop (Toshiba, 4 months old) that it's been functioning on with no problems whatsoever. This weird error message flashed twice about it not being able to sync because of some software problem.
Eversince then, the only thing I can charge my ipod on is the family treadmill in the basement (~_~) as no other computer in the house recognizes it. I can't even charge it through the wall sockets, either.
I have changed the ipod cord, still no luck. I've also reset the device about 3 or 4 times and uninstalled, restarted the laptop then reinstalled itunes. I would like to reset it back to factory settings but that's impossible as computers/laptops don't pick it up. I live very far from a Mac store...
What's a girl to do? I can't live without my Busta Rhymes and Wu-Tang Clan!
Any advice would be greatly appreciated! Thanks!

you have to update Vista go to this site and up-date http://windowsupdate.microsoft.com

Error message into a Variable.

Dear users,
I have a rather usual (unusual from the weekend beers for me though!!) query which I can't figure out a proper way to implement.
My requirement is like this:
I have a message class in which I want to define a text 'Employee number & not found'.
I want to use this in the program, but not to raise this error. Instead, I want to move this error message with the Employee number into a Character(200) variable.
So instead of using MESSAGE e0xx(messageclass) USING employee number, I would like to move the error text into a variable which looks like:
lv_text = e0xx(messageclass) USING '1234' which stores the text 'Employee number 1234 not found' in lv_text.
How would I acheive it??
Thanks, V!

Try tis way
message e999(00) with i_emp-empno into lv_text.
press f1 in message will provide you more details
a®

IPod seen by windows, not by iTunes+ weird error message

I have a first generation 2GB iPod nano and i use windows xp. I can't load any music because iTunes doesn't see my iPod and an error message pops up that reads like this: "iTunes: iTunes.exe corrupt file. The file or directory \iPod_Control\iTunes is corrupt and unredable. Please run the checkdisk utility." I've tried everything, reinstalling iTunes, different versions, reinstalling OS, resetting iPod, even on another computer, same problem. Other than that, the iPod works normally, it's just lacking music..
and why is there no email adress from apple for service qustions? 10x

I still don't get it, how can I put it in disk mode if I CANNOT see the iPod in iTunes..?
Did you read the document i linked you to? here's another link to it:
Putting iPod into Disk Mode
whereabouts in that procedure in that document (that you get to by clicking that link) does it say that you have to connect it to iTunes to put it into disk mode?
... never mind ... i guess you've fixed it anyway ...

Error message iPod cannot update b/c all of the playlists no longer exist

Hello. I have been getting this error message. "Songs on the iPod "MAR(the name of my iPod)" cannot update because all of the playlists selecting for updating no longer exist." And my playlists are still on the left side in my iTunes. They do exist. I have a feeling ths might have to do with the fact that on vacation the person I was visiting gave me a gift of putting all of his music that would fit into the external hard drive part of my iPod, and for the past week or so I have been putting that music onto my 40 GB portable hard drive at home. I suspect I took a vital folder out of my iPod by accident. Right now I have the folder iPod_control if I open my iPod up in My Computer. Am I missing something? Right now my iPod is empty because iTunes made a composite playlist last week and I deleted it thinking I could get my real playlists back. Can you help me, or reccomend a site/someone who can? Thank you.
PC Windows XP

hiya!
And my playlists are still on the left side in my iTunes. They do exist.
let's just doublecheck this. folks get this message if they have "automatically update selected playlists only" selected in their itunes "ipod" preferences tab. so bring up that tab ("edit > preferences", click "ipod" while the ipod is showing up in the source list), and do a playlist by playlist crosscheck of the playlists selected in that tab, and the playlists showing up in the itunes sourcelist.
is there any playlist selected in the preferences tab that isn't showing up in the sourcelist?
love, b

Windows Blue Screen Error Message Appears As Soon As IPod Connected

Everytime I connect my IPod to my computer, I get the Windows Blue Screen error message. Thought it was the cable, so plugged cable in by itself. No problem. Uninstalled IPod and ITunes software and then plugged in IPod, still got the Blue Screen. The Blue Screen says something about "recent plugged in device problem". It is not the cable, it must be the IPod. Did not have this problem when I bought it. Tried it on labtop and get the same error message. I can't do updater or anything that requires me to plug the IPod into a computer because the Blue Screen appears immediately. When I unplug, the Blue Screen remains and locks up the computer so I have to restart each time. I have tried everything I can think of. Please help.

Hi Mike thank you for replying,
I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
If you can help me out or suggest where to search it would be much appreciated.
Thx

IPod Error Message: "The disk could not be read from or written to."

Hello!
I was syncing my sister's video iPod (30GB) and this error message pops up "Attempting to copy to the disk. "SARAH'S IPO" failed. The disk could not be read from or written to."
I have restored it three times already, but once it starts putting the music and files back onto the iPod it pops up with that error message. I have updated to the latest version of iTunes and iPod software available. My OS is Windows XP.
Is this something serious? Will I be able to fix it myself or will I need to send it in to be fixed by Apple? Will that be expensive? We didn’t get the Apple replacement plan. D=
Any help would be greatly appreciated. Thank you in advance. ^_^
PowerBook G4 Mac OS X (10.4.3) 15" PowerBook 1.5 GHz PowerPC G4, 1.5GB RAM - Windows XP with iPod 5 Generation

Okay I went thru that entire list and here's what I got...
(1) My OS is XP and is running fine.
(2) I've updated my windows
(3) I don't know of any software that might be interfering.
(4) There are no damaged files.
(5) My Windows hard-drive is not damaged and I've tried restoring my iPod's disk thru iTunes but it still doesn't work.
(6) I don't have an iPod photo and I can't find the folder to delete the cache if if I did.
(7) The USB cord is firmly connected into my USB port and my iPod
(8) My music is on my external hard-drive so I need to keep 3rd-party hardware connected
(9) I will try another USB cord to see if that works.
Is there anything else that I can do? Can Apple fix this?
Please let me know.

IPod Touch will no longer sync...error message.

For some reason my older iPod Touch without a camera on it will not sync any more and I am getting an error message saying this iPod cannot be synced. Now I had it set up to sync over Wi-Fi and I would occasionally hook up to the computer with the cable and got error messages on both. Now I read something about removing the SC Info Folder. If I do that will that mess things up with syncing my iPhone?

What is the exact wording of the error message?

FDM error message

Similar Messages

Maybe you are looking for