FDSR-DMSHB - Local currency amount blank

Hi collegues,
We need to evalute our treasury on a local currency basis but on tables FDSR and FDSB "Local currency amount(DMSHB)" field it is not allways updated...
We know that Standard RFTS7000 - Position/Treasury forecast report can convert the amounts on treasury currency into LC but what we need it is the field "Local currency" updated on both tables.
Is this a standard behaviour or something should be mended?
Thanks in advance!
Regards,
Rushid

Has somebody ever came across this same task?

Similar Messages

  • Change of local currency amount in park document

    Dear SAP Experts,
    I have some queries regarding the local currency in parked document.
    Here are the steps to generate the issues:
    1. Enter vendor invoice using FB01 tcode. E.g the company code currency is MYR, then change the document currency to USD.  Maintain both debit and credit leg for the document. Please enter more than one expense account with different amount at debit side.
    Enter the amount in document currency (in this example is USD) field and enter. System will populate the local curreny (in this case is MYR) based on the table currenct updated in the system.
    At this point, the local currency (MYR) need to be changed based on user's requirement. In this case,they will be some deviation of currency rate since user has manually entered the desired amount for local currency.
    2. Park the document once finished.
    3.Goto transaction FBV0 and open the parked document.
    4. You can see the ammended local currency amount still populated correctly in local currency field.
    5. Post parked document.
    6. Display the document posted and see that the local currency amount has been changed to the amount based on table rate in system.
    Queries:
    a. Is there any way to make sure that the ammended amount would not be changed after the document has been parked and then get posted? Please be informed that this scenario would not happened if the document is directly being posted without parked.
    b. If the exchange rate at document header is being changed based on the desired amount of local currency, this would not be an issue. Since the requirement is only to change the local currency amount at GL level and not at Vendor line item. But at the end the total ammended amount at GL level has to be equal to the vendor total amount. how to resolve this issue? Can standard SAP process/configuration can catered this scenarios..?
    Thanks a lot for you help.
    Your kind cooperation is highly appreciated.
    Kind regards,
    Yuzeila

    Hi SAP experts ,
    My situation is the same - to park GL documents by uploading from a file  and then edit the local currency amount if necessary.
    However in my case we have an excel sheet generated from an external system and our users want to upload them and park all the journals  at a single time.
    We are using RFBIBl0 direct input program to upload the file and park then transaction using FBV1.  Alll the documents are parked with the data  as in the excel sheet. 
    Next step is that the users go to FBV0 to edit the parked documents and sometimes it is required to change the local currency based on the current exchange rate and then post the journal  .
    However when the parked documents are edited using FBV0 the local currency amount entered by the user is ignored and the system still  overwrites it with  the system calculated amount .
    b. As per your suggestion - I cannot use FV60 using direct input program as FV60 transaction is not supported.
    Please can you suggest if there is any way to park the Gl documents in background  from a file  and then edit the parked documents as required i.e change amounts and other fields.
    You help is much appretiated.
    Thanks and Regards,
    Aarthi

  • In Journal can i specify the Foreign currency  and local currency amount?

    In Journal Entry can i specify the Foreign currency amount and local currency amount?
    I tried the following code it is working fine using DIAPI.
    Here the Local currency and the System currency is SGD. And the Journal is for USD.
    oJnl.Lines.FCDebit = 120.10
    oJnl.Lines.FCCredit = 0
    oJnl.Lines.FCCurrency = "USD"
    oJnl.Lines.Debit = 120.10
    oJnl.Lines.Credit = 0
    oJnl.Lines.Add()
    oJnl.Lines.FCDebit = 0
    oJnl.Lines.FCCredit = 120.10
    oJnl.Lines.FCCurrency = "USD"
    oJnl.Lines.Debit = 0
    oJnl.Lines.Credit = 120.10
    oJnl.Add()
    But, the above way of doing is not working if i pass this Journal through B1.
    B1 is not allowing to change the local currency amount, Local currency amount is automatically calculated based on the FC amount and the Exchange rate.
    So Can i use the DIAPI to do this? is this right to do?

    Solved.
    In Journal Entry window, please kindly go to Form Settings/Document/
    Table tab page/ Convert Amounts According to Rate upon Exit:
    Clear the checkboxes 'From LC Field' & 'From FC Field', then the Local
    currency amount will not be automatically calculated based on the FC
    amount and the Exchange rate.

  • 0.01 price difference local currency amount (not due to forex)

    Hi All,
    I have this strange system behaviour.
    In foreign currency, it has no issue. But when see in local currency, it has price difference which is not due to forex.
    The exchange rate used is 7.79594
    ithe 4 GR lines in foreign currency
    14,006.00
    9,870.00
    14,194.00
    3,948.00
    where the total foreign amount is 42,018.00
    the 4 GR lines in local currency
    109,189.98
    76,945.96
    110,655.62
    30,778.38
    where the total calculated by system is 327,569.94
    BUT, if you calculate yourself, it should be the below where total is 327569.81.
    109189.94
    76945.93
    110655.57
    30778.37
    Both amount giving the difference of 0.12. (line item of GRC cannot set off due to difference of 0.12. GR 327,569.94 and IR 327,569.82).
    Now, during IR, the foreign amount is same which is 42,018.00 and exchagne rate also the same 7.79594 but the GRC amount is credited 327569.82.
    But if you see in PO history in me23n, the amount at IR line is 327569.81.
    When I see the document in local currency, it throws out credit of 0.01.
    My question is,
    1) why during GR, the amount calculated manually and system different by 0.12?
    2) why during IR, the local amount with addition of 0.01, which is 327569.82 whereas in PO history in me23n, it is showing 327569.81. Why FI document figure and PO history tab IR line different by 0.01?
    Thanks

    Hi Calesta,
    While the currencies have decimals exceeding 4places, then system would many times dismayed while converting and displaying between the local and the foreign currencies. Pls check if you have defined decimal places for the currencies as per your requirement.
    Finally the concern is in the acc doc entries either in MIGO or MIRO. If the difference you are getting is affecting your accounting due to exchange rate differences etc you can configure automatic posting by TE key KDR in OBYC
    Regards
    Shiva

  • Forcing Local Currency amounts when posting Foreign Currency documents

    When posting entries in a foreign currency (FC), it is possible and often used to force through a local currency (LC) amount that differs from what SAP would have posted using the current For Ex rate.  This is used in cases where a payment is made in FC a couple months later and someone would like to see the LC of the originally posted invoice match the LC of the payment.  Although SAP allows you to override the For Ex rate in such a manner, what are the effects of these types of postings?  Does the difference ever get recognized, and, if so, where? 
    Thanks in advance for any explanations.

    Hi,
    Suppose at the time of invoice the exchange rate was 40 and the amount shoule be as below:-
    Document currency = 100
    Local Currency = 4000
    But you have entered the invoice at exchange rate of 45 which was applicable at the payment date
    Document currency = 100
    Local Currency = 4500
    And the payment document line item is posted with the
    Document currency = 100
    Local Currency = 4500
    In this case, system will not do any foreign exchange rate difference provided there is no month end revaluation happening between the invoice posting date and paymentt posting date.
    Regards,
    Gaurav

  • Material Document List - Local currency amount

    Hi Experts,
    We encountered the material list initial entry of stock total amount does not tally with the goods issue for an order.
    All the material was purchase in (EUR) currency and the material document list was converted to local currency (RM).
    Just want to confirm this is normal for the material document list as due to foreign currency exchange rate ?
    Hope you can assist to answer the doubts for us.
    thanks.
    rgds,
    tee

    Hi,
    Its MB51 - Detail list.
    Whereby the curency amount was display in RM.  But at PO level, item was purchase under EUR currency.
    The user was add-up the total and found the its not tally even the qty of material was fully consumed.
    thanks.
    rgds,
    tee

  • Profit center report with cumulative local currency amount

    Hi,
    I am working to create a report with cumulative local currency .,so that the report data should tally with GL account balance (FS10N).
    This report is for balance sheet accounts . Whenever we used to create report with either report painter or drill down report, the option for defining key characteristics is showing only the profit center currency, company code currency or transaction currency.No option for cumulative local currency.
    Thanks,
    Anitha

    Hi Srinu
    RPC0 applies to CC reports and not PCA reports
    I am surprised by your statement that Summary reports derive values based on Current Fx rate
    GLPCA and GLPCT are the tables that are used in line item and Summary reports.. check the value in GLPCT and do they match with GLPCA or not
    I am still not convinced about your issue.. Why do you need currency conversion in report?
    Assume your comp code curr is USD and Cont Area curr is EUR.. You will be able to see all reports in both currencies without any conversion required during report execution. This is because all the transactions are recorded in these two currencies
    Ensure that the All Currencies indicator is turned ON for your contr area
    Br. Ajay M

  • Amount in local currency for GRs

    Hello gurus,
    can anyone please explain to me this phenomenon:
    We have got a PO for 10 pieces of a material. The price is $7,40 per 10 pieces, so $7,40 total.
    Someone posted a goods receipt for 7 pieces. For whatever reason the amount in local currency (Amount in LC) for that GR is $6,17.
    Later, this GR was reversed using movement type 122 and a new GR for 10 pieces was posted. This time, the Amount in LC is $15,66.
    Can someone please explain to me where those values come from? I cannot change the price in MIGO, can I? And if I cannot, how does the system calculate those values?
    The problem is that now there is a difference between GR and invoice (correct price = $ 7,73)...
    Thanks
    Alicia

    Hi
    The problem is due to non sequential operation.
    Generally,
    Step 1: When GR is done after P.O , system will pick the price of P.O and Post.
    Inventory (Dr)  and GR/IR ( Cr.)
    Step 2 : If the IR is done after P.O and latter GR, then IR price take precedence over the P.O price.
    Step 3 : If there is no stock and Partial IR is done after P.O , tehn while GR system will take partial value from P.O and Partial from P.O
    In this case.
    PO: 10 pcs., $7,40 : Unit Price is .74$
    GR (101): 7 pcs., $6,17 (incl. VAT) : Base Price 5.18 + 0.99 = 6.17$
    GR (122): -7 pcs., $6,17 (goods return)
    Till now it is o.k
    Now : IR: 1 pc., $ 7,73 (wrong IR, 1 pc instead of 10) : Unit price is 7.73$.
    GR (101): 10 pcs., = 1 pc. price from IR ( 7.73) + 9*(.86) = 15.47$
    *0.86 : refers to the P.O value inclusive of Tax ( assuming the Tax as 16.04)
    The problem in such cases is due to in appropriate GR/IR entry .
    Solution : Always Can cell all the documents last come first basis then post the document one by one.
    Solution 2 : Do clear the GR/IR account through Manual JV from FI module and Change the price by MR21 entry.

  • Create FI documents using both amount in local currency and document

    Hi All,
    I need to create FI documents using both amount in local currency and amount in document using BAPI_ACC_DOCUMENT_POST. Please tell me how to do that.
    Chinmay

    Hi,
    Firstly get the exchange rate, do the calculation using the document currency amount and populate the local currency amount field.
    Whenever you use BAPI, use BAPI_TRANSACTION_COMMIT to commit the changes.
    Thanks & regards.

  • Amount in Local Currency is showing 0 if document currency having 124,50 dollars ?

    Hi,
    I have an issue were the documents are posted using t code CJ88 for settlement between different company codes. In such case the document are posted in USD were the company code local currency is CAD. The document is displaying the local currnecy amount as 0 even when the document currency is 124,50 dollars. The document header part is showing the exchange rate but the system not considered any exchange rate.
    I have checked the exchange rate as per the details in the document as Translation date. but system not considered it.
    No where the exchange rate is given as 0.
    I think while posting using CJ88 we cant modify the local currency amount.
    The settlement rule is perfect nothing wrong in it.
    Please advice. Attached a scrrenshot.
    Thanks in advance
    M.Shiva Kumar

    Hello ,
    Logically speaking ,if there is stock , then u should have the cost/price.
    If u create a new material , & then the first stock is acquired via procurement , then u need not maintain the MAP/SP.
    BUT , if u create a new material & need to upload some existing stock , u need to maintain the MAP/SP so that the system knows the valuation of the stock.
    While doing a GR through  PO , the system picks the valuation form PO ( & also updates the material master MAP) , but for initial entry there is no reference & hence system takes the MAP from material master
    Hope this helps
    Regards
    Anis

  • Wrong Amount in Local Currency

    Hello, every body.
    We found the wrong amount in local currency has been transfered to accounting document as the following example.
    Example:
    .Document currency: EUR
    .Local currency: BHT
    .Dr: Vendor   6,458.40(amount)  271,611.23(amount in local currency)
    .      Cr. Sales-Foreign(Export)      -3,229.20(amount)   -135,805.61(amount in local currency)
    .      Cr. Sales-Foreign(Export)      -3,229.20(amount)   -135,805.62(amount in local currency)
    How can we solute this problem?
    Best regards,
    Sun

    HI
    check this links
    difference in local currency amount fb60
    Onlybalances on local currency - incorrect foreign currency valuation
    Regards,
    Krishna.

  • Group cur. amount and local curr. amount are not matching in CO88 Settlemen

    Hi Gurus,
        After settlement in CO88  for some process orders only in settlement accounting doc Group currency amount is not calucalted correctly against Local currency amount . Pls find details below
    For one process order in co88 setllment accounting document local currecny amount 12312.89 RSD  , In BKPF table i have chekced the doc has picked to convert it in to Group currecny (USD) exchange rate type M and  indirect exchange rate from RSD to USD  71.96. The document posted on 30.6.2011 , exchange rate maintaied in TCURR table on 01.06.2011 as 71.96. SO The system has picked correctly upto this.
                    As per this Group currecny amount should be = 12312.89/ 71.96 = 171.10
    But system posted Group currecny  as  = 45.74 USD , 
           How the system posted 45.74 in USD. Pls suggest what could be the reasons for this .This is happening only for some process orders.
    Thanks & regds
    Ramachandra

    thank you

  • Local Currency conversion in PO

    Hi
    Iam facing problem in wrong Local currency conversion while doing GR reversal for foriegn currency Subcontract PO.
    Local Currency : EUR
    PO Currency     : HUF
    User has entered wrong Exchange rate in OB08. (Indirect Quotation : HUF -> EUR) & did Goods Receipt with reference to PO. After that Exchange
    rate has been corrected immediately, but some GR documents posted with wrong exchange rate.
    To correct the wrong entries, Again Wrong exchange rate has been updated in OB08 & reversed those material document in MBST. But the strange issue is system calculating different local currency for those reversed documents. The Local currency Amount of Goods receipt document & reversed document local currency amount is not matching,Ideally both should match.
    Following observations on this,
    1. Exchange rate are same in both doucments. I have checked in document Header.
    2. GR Qty & Reversed Qty are same.
    3. PO currency (HUF) amount are same in both doucments.
    4. Finished Material & Raw material are managed in standard Price.
    5. Document date & Posting date are same in both doucments.
    Anybody can explain why the system updates wrong local currency ?
    Thanks in Advance.
    Regards,
    RRS

    I do not remember the Tcode, however it is under SPRO>>General setitings>> currency .. guess it is OB90
    And if the difference is large. check the following:
    Check the exchange rate type you use, next go to OB08 and see if the inverse translation is maintained for your currencies  EUR- HUF and HUF- EUR
    and then check OB07 and see what settings you have for the ex. rate type you have i.e Inv, fixed ...
    You might hit upon something here

  • Invoice in local currency Clearing in Foreign currency

    Hi,
    Is it possible to clear the invoice in foreign currency which is originally posted in Local currency.
    regards
    Stefen

    Yes, but if the Local currency amounts do not match,then you will have to either:-
         a) Write off the differance as a "Discount"
         b) Manually add another posting line, to post the difference to the Exchange difference accounts.
    a) is easier, but b) is correct from an accounting view.
    Regards
    D.

  • Tables for local currency - PO

    Dear Sir,
    For my PO history report, Im taking the datas of Mat docs (mseg,mkpf), invoice (rseg,rkpf) and excise on j_1iexcdtl.
    Other than import type of PO ,Im getting the values in INR amount as given/available. So for Import PO's, problem Im facing in ,getting the amount of invoice and material documents are in International currency format as given other than INR , which i want to total the amounts of all PO's for my client in INR values.
    Pls post me, is there any other tables which have the local currency amount(converted) details of the Particular PO - Import,corressponds to mat doc number and invoice number.
    I'll appreciate ur feedback.
    Thanks & regards
    sankar.

    Hi,
    Use the F.M CONVERT_TO_LOCAL_CURRENCY
    CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'
    EXPORTING
    CLIENT = SY-MANDT
    date = sy-datum
    foreign_amount = XXXX "enter the amount which is to be converted
    foreign_currency = YYY "enter the currency of the amount to be converted
    local_currency = ZZZ "enter the to currenct
    TYPE_OF_RATE = 'M' "enter the type of the rate
    READ_TCURR = 'X' "check this is you want to take the data from table tcurr
    IMPORTING
    EXCHANGE_RATE =
    LOCAL_AMOUNT = amt "this is your result
    EXCEPTIONS
    NO_RATE_FOUND = 1
    OVERFLOW = 2
    NO_FACTORS_FOUND = 3
    NO_SPREAD_FOUND = 4
    DERIVED_2_TIMES = 5
    OTHERS = 6
    Regards,
    Satish

Maybe you are looking for