Feature Request: Can I save all of my open tabs to some kind of template file so I can re-open all of my tabs at once at a later time from somewhere else?
I'm currently reading 10~15 tabs of pages, and I'd like to take them with me on the road, so I can finish reading all the contents at a later date/place/machine. Is there someway to just save my tabs to like a file, then email it to myself and goto another computer with firefox and run that file and go back to reading all the websites and links I'm currently browsing?
Perhaps the easiest and most reliable way to do this is to use the Session Manager extension. It allows you to easily recover your previously opened tabs from a crashed Firefox session, but it also has a very nice "Session Save" option, which allows you to save all your open tabs to a single very small file, and open it again from any Firefox that has Session Manager installed. I just used this to save my open tabs from before a reformat into my fresh install of Windows.
Another option is using Firefox Sync, but it is best if you only use it on PCs you own, otherwise you could end up syncing your passwords and bookmarks and open tabs onto someone else's computer where they might do who knows what.
Similar Messages
-
Feature Request - If a Save to PSD fails because of image size, offer to Save to PSB
Feature request — If a save to a PSD aborts when the file size grows beyond 2 GB, offer to save the file as a PSB instead of just displaying an error message and quitting. Better yet, if the image is to big to begin with, make the offer before starting the save operation. Similarly, if an image is too large to save to TIFF, offer to save it as a PSD or PSB.
When you’re working on large files, it would be nice not to have to redo a Save as a Save As to PSB after several minutes delay.
BTW, I tried without success to post this at the feedback site. Once again, a dialog opened asking for a verification code that would be sent to me by e-mail, which in past attempts has never arrived.Not a bad idea, though really what would be even better is if other 3rd parties would embrace the PSB format so we could just use PSB for everything and leave PSD behind. There's almost no difference in size. Here's the same file saved in both formats:
C:\TEMP>dir egb.ps*
Volume in drive C is C - NoelC4 SSD
Volume Serial Number is 00ED-C11E
Directory of C:\TEMP
06/30/2012 01:04 PM 1,411,420 EGB.psb
06/30/2012 12:14 AM 1,397,248 EGB.psd
In my case, I don't send PSDs to anyone, they just represent archives of my master work, and I will always have a modern version of Photoshop to read them with. So if I could I would just use PSB for all master files. Problem is, two 3rd party tools I like to use don't currently handle it:
IrfanView
FastPictureViewer Codec Pack
Probably some day in the future they'll work. I encourage you to write to the people whose tools you'd like to see be able to read PSB to implement support.
See also this thread: http://forums.adobe.com/message/4393244
-Noel -
can you tell me when you launch a camera plug in for Raw file, Then I can use photoshop elements 13. I have now a trail version
For that Nikon model you need ACR 8.3 that means CS6 or CC. Or you can download the DNG converter convert your Nikon RAW files to Adobe RAW files. And then process the Adobe RAW files with CS5 ACR version 6.7
Camera Raw plug-in | Supported cameras -
Running 10.4.11 and trying to restore OS9 as well as iLife etc. I tried to install iLifer from the original disc and the computer doesn't open the install program with the .mpkg file extension. Can you help?
Hi Barbara,
Try Pacifist...
http://www.charlessoft.com/
then extract/install what you need from your Install Disc. -
I can't connect to my app store it says some kind of error (-3212)
i can't connect to my app store it says some kind of error (-3212) please help what is happening ? my app store in iphone 5 doesn't work too. it keeps saying cannot connect to app store
I also will not open app store. iphone 5s. seems the problem is only in Azerbaijan. probably shut down access to the app store.
Qaqas mendede acmir. dostlarimdada eyni problemdi. nese Azerbaycanda olan setle baglidi. -
When I try to save a Firefox web page, I get about a dozen tiny files with funny names cluttering up my documents folder, and making it hard to find anything. This reminds me of problems I used to have with Internet Explorer more than ten years ago. But at least, IE was kind enough to gather all of these files in a single folder, named "files". Firefox dumps them all into my documents folder. Messy.
Years ago, I discovered Opera, which offered a file format that combined the original html code with the other files into one file: an internet archive, with the extension mht instead of htm. I used Opera for years, but recently became aware of the advantages of Firefox.
A few days ago, I downloaded the latest version of Firefox, and installed it. I have been evaluating it ever since. It looks good; I have figured out (more or less) how bookmarks work, and I'm getting used to the taskbars.
But when I try to save a page, I still get a deluge of tiny files cluttering up the target folder. Firefox doesn't save pages in archive form, but only in the old scattered form. Of course, I could simply save only the html. Maybe that's the best thing, but it loses a lot.
The chaos of junky files cluttering up my target folder is enough to send me back to Opera, despite its limitations.This extension allows for web pages to saved on MHT format. <br />
https://addons.mozilla.org/en-US/firefox/addon/8051 -
HT4528 my new iphone 5s is going crazy like someone else is controlling it from somewhere else
my new iphone 5s is going crazy like someone else is controlling it from somewhere else
Basics from the manual are restart, reset, restore
-
After an iTunes generated update of iTunes, some of my music can't be accesed any more. When I try to play the file, iTunes says it can't find the link. This also happens with music I purchase from the iTunes store, so I've lost all this music; do I have to re-buy the purchased music again? My iTunes program is on my C drive, and the music library is on my D drive. In iTunes, I've set the ripped music to be placed in my D drive. The lost links are on some music files, but not others which do play music. Some compilation music files were split up into individual files, usually without LP art attached. Some album art was placed on wrong albums as well. Music with lost links have a ! mark beside the song name. File info says the link is on my C drive, but I can't find it there. Any ideas on how to get these lost files back. Thanks, Moizy.
Try this...
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
How can I set Metronome to be OFF by default, besides creating a template file?
Default setting for the Metronome was always OFF until I upgraded to iLife '11.
From an archived thread on this topic, I was reminded of the technique of creating a template file to open with instead of "Create a New File", but that's a hassle to remember and find. And you have to remember to "Save as..." as soon as you get started.The Metronome is on every time I open any of my previous files, even after I turn it off. The next time I open the file, it's on again. Impossible to stop that?
If the answer is "no", then this is a BUG in this version of GarageBand. Can't Apple developers correct that and issue an update? -
I cannot play music from my libray on either my external drive or my laptop. I keep getting the same message - "___ song (all of them) could not be used because the original file could not be found. Would you like to locate it?" I have changed the path several times under preferences and it still won't recognize any songs from either my laptop hard drive or my external drive. I can't play any music at all.
I think I've fixed this on my machine. If you look in the ITunes folder there is a subfolder called Previous iTunes Libraries. In my case for some reason this contained the one which had always worked and a new one was in the main folder. I closed iTunes, deleted the new one, and moved the old one back to the main folder, then opened iTunes. It then rebuilt the library and it plays correctly. Hope it works for you.
-
Is there a PS setting where it can read my Canon Mark 3 5D's monochrome setting so that the files will also appear in the same monochrome structure (instead of appearing in colour as it is now when i open in PS, not even monochrome)? Or do I have to change from RAW each time to Monochrome within PS (even if I have set up for Monochrome in my 5D)?
1. Basically I am taking photos with a monochrome setting with my 5D and the screen shows monochrome.
2. when i import this onto my computer and open with PS, it opens in colour.
3. when I change this to Monochrome in PS. (It cannot read my monochrome setting with my preference of the greyscale mix when I viewed it on my 5D)
4. my question is: is there a way so that PS can read the monochrome setting from my 5D and display the same monochrome setting as my 5D instead of a different one from PS.
Lilyyou need camera raw 6.7 or better.
i don't know what version of ps you have so i can't say if it can be updated to use that, but update anyway.
pre cc updates: http://www.adobe.com/downloads/updates/
cc updates: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
cc 2104 updates: http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html
if you can't update your cr sufficiently, use the dng converter. DNG Converters:
Win
Mac -
I'm trying to update to something past 4.2.1 so i can get multi tasking. Any help would be great.
4.2.1 is the latest iOS available for the iPod touch 2G.
-
for example, can you be using another wi-fi network, for example in another country? and still stream music from my mac to ipad for free? and does the mac have to be on?
You could use something like Splashtop Remote Desktop on your Mac and iPad. This streams your Mac's desktop to your iPad so you can have full access to everything on your Mac anywhere in the world, as long as your Mac is turned on and connected to a network and your iPad has a data connection. It can stream full audio and video from your Mac. It is not exactly home sharing but it does what you want fairly well, with the added bonus of being able to use your Mac from anywhere. Search for Splashtop on the App store for more information. It normally sells for around $10 but is frequently on sale for as low as 99c, so have a look and see if it's for you while you wait for it to go on sale. I can confirm this works as I use it daily to work on my Mac from my iPad while at work.
-
What this does for me is allow me to find rarely accessed websites by looking under different kinds of categories of favorite places. If I'm restricted to only one location for the data it makes it harder to find.
Thanks in advance for any help you can give. It may still be possible to do this, and I just don't know how. In the past, if I created a new file folder and saved a webpage to the new folder, it would persist even after I saved it a 2nd time to a different folder. Now, if I save it to a 2nd folder, it will disappear from the 1st folder.You can do a Copy & Paste in the Bookmarks Manager (Shift+Ctrl+B) to create a copy of a bookmark.<br />
You can also drag the website's favicon on the left end of the location bar to a folder into the Bookmarks menu drop down list or to a folder in the Bookmarks side bar (Ctrl+B) or onto the Bookmarks Toolbar.<br />
In the side bar you need to click to the left of the icon to prevent Firefox from opening the bookmark.
*Old Add Bookmark Behavior: https://addons.mozilla.org/firefox/addon/8479 -
Can't save power pivot report back to power pivot gallery...file is read only
Hi eb
I have developed an excel pivot report in a power pivot gallery (all in 2013).
Next time i open that report from the power pivot gallery and attempt to save it again to the gallery
I am blocked with a msg: we cant save http://........./powerpivot gallery/myPwerPvt.xslx file is read only.
To keep your changes you'll need to save the woorkbook with a new name or different location.
Please help!
TIA
ReaHi Rea,
When you try to edit the PowerPivot workbook, are you open it as read-only mode? Please see the screenshot below:
The "Read Only" mode will not be able to save any changes to the workbook you are loading.
In addition, is it work for you while you save the PowerPivot workbook with a new name?
Regards,
Elvis Long
TechNet Community Support
Maybe you are looking for
-
Hi guys, one question. Next Weekend i have to migrate the database cluster from the old server onto new server but there is one Problem. How can i prevent that all database jobs are running after starting the database? I read about the parameter job_
-
Hello Experts, We have created a HANA project wherein we have to navigate to different pages based on the response from the main page. However, the challenge is that we have to update fields on these pages based on an action on the current page, that
-
How do you lock wi fi on your laptop?
How do you lock wi fi on your laptop?
-
Does anyone know of a regular expression that will parse all of the text not inside tags of an html document and write it out? Even if the html is badly coded with tags that open and do not close on the same line. I am trying to use backreferencing.
-
I have been creating a PDF file of a Contacts Group in the Print funtion for many OS10 renditions. In Mountain Lion, I can still create a PDF of a Contacts group, but the resulting list is not in the Group's alphabetical order but put in a random or