Feature Request: Function To Select A Photo

e.g.
- catalog:selectPhoto( photo ),
and to go with that:
- catalog:getPhotosInFolder( folder ) - leaving folder blank returns array of photos in the currently selected folder(s).
Rob

Yes - This would be a very usefull function.

Similar Messages

Feature request - disabled auto-select in function editor

PLEASE add a setting to disable this. It is very annoying.

Hi Ben,
There are a few enhancements that could be made to improve the productivity of heavy script builders:
1) Reinstate the "Advanced Editor" button on the right side of the formula bar. It's tiring having to click the View tab, click the editor button, and then flip back to the view tab to apply and close (or use the pull-down menu on the left). Leave the View
tab as is - just put the button back as a shortcut to open the editor dialog box. Thanks!
2) When you create a custom function, the function tab appears...which means that PQ knows that it's working with a function. It would be useful if, in addition to creating the function tab, PQ unchecks the load to workbook check box. Loading a
custom function to the workbook serves no practical purpose. The problem is that I invariably forget to uncheck the box after creating a new custom function, and have to re-enter the function, uncheck the box, then delete the now useless worksheet. Phew!
3) Would be really nice if there was a window that allowed the input of test function arguments, and displayed the results of intermediate expressions calculated eagerly. Such functionality would be a huge boost for troubleshooting complex custom functions.

Premier Pro CC Feature Request: Automatic Window Selection

I wanted to see if anyone else would like this feature. It's not due to a major issue, just a minor but constant annoyance.
So when I started working with 60fps footage, I realized that automatic dissolve transitions (by pressing Ctrl+D) were set at 30 frames, rather than at 1 second. This made my fades faster than I wanted, so I created custom opacity animation presets titled "Fade In" and "Fade Out" that each last for 60 frames. So what I do is drag the preset over onto the clip I want to use it on, and then, purely out of habit, I immediately hit the space bar to resume playing the timeline. But the effects panel is still selected, and my preset is selected, so instead of playing the timeline, it renames my preset to " ". My request is to have an option where when an effect (or perhaps anything else) is dragged onto a timeline, the timeline panel is then automatically selected, so I don't have to keep retyping the title of my preset.
Thanks!

Sure enough... Okay I figured out what is happening. And it has to be with a custom preset (because you can't rename regular ones).
If the effects panel is highlighted, and the custom preset is highlighted, if my mouse cursor is over the text of the preset (rather than the icon) when I click and drag it over, as soon as I click down it selects the text in the preset title for renaming. So I believe it is set to where if you click twice on a custom preset it will open the text for renaming. The problem is, it doesn't matter how far apart those two clicks are, even if you click and drag.

Feature Request - Illustrator - Multi-select and rearrange a set of art boards at once.

I've been hoping for align and multiple select ability for art boards for several years. The issue is that when you're using a large number of art boards arranged in a grid for a large app design project or similar, rearranging art boards is a huge time waster. Repositioning is difficult as there is no way to multi-select or drag several at a time. Art boards also get mis-aligned easily, so being able to use existing align tools for art boards themselves would be an expected, easy to grasp, evolution. (and much faster than doing them one at a time) I often have large illustrator files with a spread of assets ready for export. Being able to make these files orderly and easily viewed by others is crucial.
Also, numbering...
Usually what happens is that we'll drag-duplicate a screen to alter, but they end up with an art board numbers that are out of sequence in the design, making the export out of order as well. It would be awesome to directly click to alter an art board's assigned number.

I have a related FR, so I decided to integrate it with the above, which I also like. The FR is for: Smarter Finds with and/or logic and Smarter Smart collections with And/Or logic. For example, I want to find (or to make a smart collection of) all the photos that are in a folder which meet these criteria:
Their file name contains the word "Cuba" AND they have modifications (in the develop module)
OR
Their file name contains the word "Cuba" AND the file extension is .psd
This is because most photos in this folder are NEF, some of those have been developed in LR, and some have been exported to Photoshop to be worked on. It's frustrating not being able to make this preselection to find ALL the photos I've worked on. Anyone agree we need and/or/not/but logic and to be able to combine criteria in a find request?

Lost functionality for selecting multiple photos?

In iOS previous to 5 I could go into my imported photos, choose select, then tap, hold and drag my finger across multiple photos to select a whole page very quickly. This functionality seems to be gone in iOS 5 and each individual photo needs to be tapped -- one by one. This is a serious step back for those who import many photos from their camaras and then want to clean out the imported photos quickly. Can anyone confirm this functionality is still there and perhaps I am not seeing how to do it?

I don't whether it was possible prior to iOS 5 (I'm not aware that it was), but I don't appear to be able to do it in iOS 5

Feature Request: Browse a selected channels entire listing on the guide.

I believe this feature actually existed when I first signed up with FiOS a few years ago. But, from what I recall the feature was removed when a new IMG was implemented.
Anyhow, browsing a channel's entire listing on the guide allows setting up recordings for upcoming programs very easy. This type of browsing can be done at FiOS central on the PC, but it should be intergrated in the guide as it once was.
Currently, the only way I know of, that this can be accomplished in the guide, is by doing a search. For example, do a search for "History", then select the History Channel, and you'll see it's listings by days categorized by folders. This is extremely counter-productive and one big pain, especially since you have to do a search and constantly go in and out of folders to see what's on and read descriptions.
It would be great if I can select a feature such as "browse channel's entire line-up", then see a complete listing of the channels line-up with an easy view of the description for the show, like the way all the channels are listed for browsing.

Sorry, about the inconvenience. I do know you can go to the Guide and select the channel, browse the channel times with right arrow. Once you find lets say History channel, show for 6pm, press the REC key on the remote. It will bring up a list of options. One of those is Record another is set reminder. Hope that helps.
Javier
Verizon Telecom
Fiber Solution Center
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan. Follow us on Twitter™!

Feature Request: Functions to read image data, and write to tiff or jpeg.

Functions that render image data and make it available to plugins before writing to disk would facilitate writing plugins that take rendered image data into consideration. Also, if the aforementioned image data could be subsequently written to disk possibly after a bit of modification, it would open up a whole new world for plugins.
Plugins don't need to access the mid-rendering stages in the raw conversion / rendering pipeline, but having a shot at post-rendered, pre-written to disk image data would allow pixel manipulating export plugins to be written. A set of image file manipulation methods would be a decent work-around, providing the ability to read/write tiff/jpeg files.
Rob

Well, I'm replying to my own question!
I solved the problem by reading the data from my card, then using Flatten Pixmap to create a pixmap from my data array, then using Draw Flattened Pixmap to create a picture to send to a 2D Picture. This works fine.
Now, how can I change the Pixmap into Image so I can save to an AVI?

Feature Request: Function To Create A Catalog

e.g.
- LrCatalog:new( path, from )
-- leave 'from' blank to create an empty catalog, set 'from' to an existing catalog to create a copy.
-- leave 'path' blank to create in the default location.
This would allow plugins to create catalogs - what more can I say?
Rob

Yes - This would be a very usefull function.

Feature Request: Ability to change a photo's filename.

Ability to change file's name would support file renaming plugins, e.g. search & replace.

Yes - This would be a very usefull function.

Feature Request: Functions for Renaming and Deleting LrDevelopPresets

As it stands, there is no way to delete an LrDevelopPreset programmatically - short of deleting the develop preset lrtemplate file, but even then the effect doesn't take place until after restarting Lightroom.
Likewise, there is no good way to rename an LrDevelopPreset.
Rename and delete functions would be very helpful to plugins that work with lrdevelopresets.
Thanks,
Rob

Hi
Can you please post the archived project so that I can test in the latest internal builds and take the necessary actions?

Feature Request: Photo Borders and Copying in Books

These are a few related feature requests. If anyone knows of a better way to do this with the current software, then I would love to hear it.
When making books I like to have borders around the pictures of various colors (usually black or white) and various widths. In Apeture this is a pain to do. I fiqured out that I could fake it by making a picture box and inserting a solid black picture into it and then creating a smaller picture box in front of it for my real photo. This might be tolerable if I could at least then select both picture boxes and their contents to copy and then onto other pages as a template that I can resize as needed.
Ideally I would love to be able to copy and paste multiple elements on a book page and I would like to be able to define photo borders. Any chance of seeing this in the near future?
Thanks,
Sean

Thanks for the reply. You are right, the cut and paste works fine, it just didn't work the way I expected it to. Maybe that is a GUI design thing to consider. I was actually trying to click and drag a selection box like you might do in iPhoto to select multiple images that are right beside each other. This doesn't work at all in Aperture, but your method does work just fine.
I agree with the other poster that some additional features like:
Photo Borders
Export to PSD (with layers)
Custom page sizes and Custom themes
would be very nice and start to make that tool truley useful.
Thanks for a really nice product. Keep up the good work and stay ahead of the pack.
Sean

Feature request: Print function in Web Inspector

Safari's web inspector rocks. It would be neat, though, if you could print the element you've selected. Sometimes I don't want to print an entire page, just a portion, and the Web Inspector seems like an appropriate way to specify which element to print.
Although, Safari on the iPhone has some way of guessing which element to zoom in on when the user taps a part of the web page. I suppose there are many ways to do this.

Nice idea, but this user-to-user forum is not the place for Safari feature requests. Try here instead:
http://www.apple.com/feedback/macosx.html
FYI, you can also do a selected area screen capture (command-shift-4 then click-drag-release) and print that from Preview.

Feature Request: Custom uninstaller which executes actionscript function on uninstall

Hi,
My name is Ronald Kamp and I'm an IT Consultant at iDA MediaFoundry Belgium.
I would like to request a feature. At the moment I have an application that writes a file to the app-storage of my application, to the user's documents and settings folder and one value to the Encrypted Local Store. On uninstall, I would like to remove all of these files so that all links to the application are removed.
Would it be possible to add a feature to the AIR SDK that will execute a certain piece of actionscript so that all of these files are removed? Of course, it would be possible to create an installer with InstallAnywhere but then we would lose all of the checks that are performed with the standard AIR installer and uninstaller.
Thanks in advance.
Kind regards,
Ronald Kamp

Hi Ronald,
Thank you for the feature request feedback. I agree, having this functionality would be great. If you get a chance, I'd like to recommend voting for both of these ideas:
Custom hook on AIR application uninstall
Deleting local data store while unistall
You might also be able to work around this now by creating a native installer and having it sub launch your AIR installer. More details about this can be found on our redistribution instructions, and you can sign up for the licensing needed on our runtime distribution page.
Thanks,
Chris

Feature Request: Add multiple photos to catalog at once

The API currently allows you to use catalog:addPhoto() to add a single photo to the catalog.
This works fine, but a poor user experience when adding a number of photos (esp. dozens or hundreds) - there's a separate child progress bar for each, masking the overall progress, and if the user has a sound enabled on import, it plays the sound on each photo import. If there were a way to import multiple photos at once (or API options/params to disable both of the feedbacks), this would make for a better UX when importing a lot of pictures.

Sorry. I'm having a hard time finding my way around these forums, and the search is less than helpful.
Please point me in the right direction.
Edit: I found the correct forum now, and have recreated my feature requests there and deleted them from this forum (with the exception of this thread, which I can't delete at this point). My apologies.

Feature request: remember selected attribute in wizard

Hi,
I often find myself doing this:
- In the entity object wizard, select the 'attributes' tab
- Click on an attribute
- Select the 'Attribute settings' tab
First feature request: It would be nice if the attribute settings tab would now show the properties of the attribute I last selected on the other tab, instead of the first attribute.
Second feature request: It would be nice if you could open the attribute settings of an attribute directly from the attributes tab. (perhaps via a right-click -> properties contextmenu).
Greetings,
Ivo

Filed bug#2564815 to track request number 1.
If we implement that, then I don't think you'll also need request #2. It will be just one click away
by changing the panel.

Feature Request: Function To Select A Photo

Similar Messages

Maybe you are looking for