Feature request - Grain adjustment shadows/midtones/highlights

I would like to be able to adjust the amount of grain for the shadows/midtones/highlights as I am able to do in the Alien skin exposure plugin. This would allow me to skip that step all together and just do it all in lightroom.
3 simple sliders for this would be great!

I can see the benefits of that! As this forum is focused primarily on the beta version and its new features/bugs, you'd be better to log your request on the official feature request forum here: http://feedback.photoshop.com/photoshop_family/

Similar Messages

Good way to know whether a color is part of shadows, midtones or highlights?

Hi!
Once again I realized there is a embarrasing gap in my AE-knowledge: I don't know how I can accurately see whether a certain color is being read as part of the shadows, midtones or highlights of an image. I'm sure there is some easy way that I just can't think of, so that's why I'm asking your help on this. Any tips will be appreciated! Thanks!

Another way to do it:
Apply Color Finesse to the clip in question, then enter the full Color Finesse UI. Click the Luma Ranges tab in the upper right.
Shadow areas will be rendered as black, midtones and gray, and highlights as white.
Not that there is such a sharp difference between the definitions of shadow/midtone/highlight, but it gives a nice quick idea of what's what.

PS Shadow and Highlights feature in Lightroom.

I would like to see the Shadows and Highlight features (the entire thing)
added as a palette in Lightroom. It would be very useful in my opinion and
does such a great job in Photoshop.
Robert

> I like the ability to have it automatically apply it when you bring it up. I
also like the ability to adjust the settings and save them as a default. So
if they added both of these to LR (as well as the other slider controls)
that would be great.
They are (presets for the first, ACR defaults for the second).

Console java stacktrace highlighting (feature request)

Hi!
I have a feature request for OEPE and haven't found any better place that this forum to report it.
In short, it would be extremely useful if weblogic server console view would decorate java stacktraces with hyperlinks the same way as "Java Stack Trace Console" view does.
I first encountered this feature in IBM RAD 7 and liked it the moment I saw it.
Thanks.

Hi!
Just installed OEPE 1.7.0 and guess what, it is there! It is actually highlighting stacktraces!
Thank you guys! Especially for those of you who filed, who approved and who implemented! :)

Feature request - Adjustment Brush

Loving the WB in the adjustment brush area. What would be perfect is adding HSL to the adjustment brush area rather than just a global HSL. Thoughts??

Feature requests need to go here

Feature request - 'shadow' settings for changing locked VM settings

I have a possible idea for you that I know I would find helpful. I understand that certain VM settings can't be changed while the VM is running. I would love to be able to make the change so that next time the VM restarts, it can first have those settings
changed for me before starting up again. That way, I could make the change (although it would tell me it couldn't be changed right now), and schedule the computer to restart sometime overnight, so that I don't have to either a) get up at 3am to do it manually
or b)work out what powershell command to run which would shut the machine down, make the changes, then start it up again - and hope that I'd done it correctly :-)
I hope this is a useful feature request. Generally very happy with all the improvements you keep making, thanks.
(I didn't find anywhere else I could submit a feature request, so I hope this gets to someone that can use it.)

I like that as a feature for those who manage via GUI. It would be possible to create script to accomplish the same thing and then schedule the script for execution later. But for GUI users, it makes sense to me.
I think the forums would be a good place for putting feature suggestions. It could easily be a Sticky post that would always appear at the top of the forum. Anyone with an idea for a new feature could add a post to the Stickey post, and
Microsoft PM's could just read that Sticky post from time to time. And, the built in Vote capability would allow other forum readers/contributors the ability to vote on it if they like it. It would be a useful Sticky post on any product forum.
.:|:.:|:. tim

Feature requests for LR4 beta from a wedding photographer

I would love to see some more auto white balance algorithms. There are many other algorithms that do an outstanding job that could be implemented to speed up workflow for busy photographers for when the lightroom autobalance doesn't work. Some of these include: i2e (colour science), perfectly clear, and xe847.
These 3 algorithms also apply an auto-toning feature which, when the Lightroom version doesn't work, these might give excellent results quickly. Photoperfect is a program that implements these 3 technologies into its interface and is excellent for quickly tweaking jpegs and tiffs. I would love to see this same capability married to Lightroom's excellent raw conversion engine and outstanding new highlight and shadow sliders.
A skin-tone white balance would be most welcome. Silkypix has this feature. When there is no neutral coloured object, you can click on a skin-tone and this will often white balance the image correctly.
More profiles would be welcome. To use Silkypix 5 Pro as an example again, it has 6 portrait profiles--these are most useful for achieving the perfect look for your photograph. Some are good for single light sources, while others excel at providing pleasing colour under mixed light sources.
Sliders to fine tune noise reduction based on tone (ie. shadow, midtone, and highlight) would truly make Lightroom's noise reduction the gold standard.

As these requests may not make the final release, and we wouldn't want the request to get lost in beta land, might I suggest adding it as a suggestion on the Feature Request forum http://feedback.photoshop.com/photoshop_family where it can easily be tracked? If you post the link to your request here, others can also vote on your request. You may even find a few of them already requested over there, so you could add your vote.

FEATURE REQUEST: Enhanced Texture Options in FW

Recently, a forum user was asking how to change the color of a texture in Fireworks to red or blue. In particular, he/she was struggling with attempting to apply a texture to a white object, and it wasn't showing up.
http://forums.adobe.com/thread/1006694?tstart=0
The question got me thinking about textures, how they're created and how they're applied. Textures are a unique and distinctive feature of Fireworks. On the one hand, the interface for textures is very simple to use and almost magical; on the other hand, it's surprisingly limited. The concept is great, but the implementation seems only half-baked.
With this in mind, I'd like to suggest a few simple ways that textures could be made more fluid and versatile in Fireworks.
First, a little background...
WHAT IS A TEXTURE?
In the world of Fireworks, a texture is basically a type of pattern that's applied to an object. However, unlike a pattern fill, textures include transparency and integrate with the existing fill content (color, gradient or pattern). They're suggestive of textures in the real world, which are often tactile and defined visually by light and shadow.
Texture graphics are most commonly grayscale ("black and white") in GIF or PNG format. Applied within the application, the graphics are converted "on the fly" to white-on-transparency. If the Transparent option is checked, the graphic is converted into a sort of mask, making the "textured" areas invisible instead of white.
And that's about it.
So what if you'd like to apply a dark texture to a white object? Sorry, it can't be done. What if you'd like to apply a texture in color? It can't be done. What if you'd like to reverse or invert the pattern of the texture? Can't be done.
Well, in fact, these things can be done, but not directly. They require workarounds such as cloning the object and placing the clone above or beneath the original, applying textures as pattern fills (instead of as textures) and adding effects like Color Fill, Invert, and Convert to Alpha, or editing the texture file directly, saving out a new copy, etc. In short, there are unintuitive ways to accomplish these goals that lead to bloated effects lists and layers or that require extra time and care.
HOW CAN TEXTURES BE IMPROVED?
First of all, does it make any sense that textures are applied exclusively in white? Not really. In the real world, a texture can be defined not just by light but by shadow. And even shadows can have color. This means that, at minimum, it would make sense to allow for the application of a texture in black, and, at maximum, in any chosen color.
Secondly, textures are relative. They represent change to an existing surface. Sometimes, it might make sense to highlight the texture itself; other times, the surface around the texture. This means that being able to quickly reverse the figure-ground relationship of a texture would be a very handy feature.
With the above concerns in mind, I've devised three 'user interface' scenarios, presented here in order of most conservative to most extreme. The first scenario is the least powerful but still doubles the number of possible outcomes (compared to the existing interface). The second scenario may be the most logical of the bunch and represents a modest evolution of the existing interface, while increasing the number of potential outcomes even further. The third scenario allows for the application of any color to a texture but also represents the biggest change to the existing interface; that said, it's also quite compact.
Scenario 1: Invert option
The idea here is simply to add an Invert checkbox to the existing options. Checking this option would convert white to black, allowing for the application of dark textures to white or light-colored objects. In "Transparent" mode, this option would invert or reverse the figure-ground relationship of the existing texture.
Scenario 2: Dropdown menu plus Reverse option
Here, the Transparent checkbox is replaced by a dropdown menu that includes 3 mutually exclusive options: White, Black, or Transparent. Checking the "Reverse" option would invert the figure-ground relationship of the texture. This scenario allows for 6 possible outcomes in place of the existing 2, and is actually more logical than the first scenario, which conflates two options.
Scenario 3: Color picker plus Reverse option
Here, the Transparent checkbox is removed, and in its place, a color chip/palette is added to allow for the selection of any color to be applied to a texture. (Choosing Fill: None would create Transparency.) Again, a "Reverse" option would invert the figure-ground relationship of the texture. This scenario differs most from the existing interface but is quite compact and allows for the greatest number of outcomes.
SO WHAT CAN YOU DO?
I've submitted a feature request to Adobe's official site:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
When it comes to bugs and/or feature requests, every vote counts. If you care about this issue, I encourage you to submit your own feature request to the above URL, referencing this post if desired. Feel free to copy and paste the feature request below or write your own. (Be aware that there is a 2,000 character limit to the "issue description" of a bug report or feature request, and the following report is very close to that maximum.)
FEATURE REQUEST
Product name: Fireworks
Product Version: 12.0.0.236
Product language: English
*******Enhancement / FMR*********
Brief title for your desired feature: Enhanced texture controls, including the ability to apply textures in black and/or color (instead of white), and the ability to reverse or invert texture.
How would you like the feature to work? Three possible implementations have been outlined in this forum posting:
http://forums.adobe.com/thread/1042206?tstart=0
The basic scenarios are as follows:
SCENARIO 1: An additional "Invert" option. Checking this option would convert white to black, allowing for the application of dark textures to white or light-colored objects. In "Transparent" mode, this option would invert or reverse the figure-ground relationship of the existing texture. This scenario would allow for 4 options in place of the existing 2.
SCENARIO 2: Replace Transparent checkbox with a dropdown menu (White-Black-Transparent) and a "Reverse" checkbox. The dropdown menu offers 3 mutually exclusive options, while "Reverse" inverts the figure-ground relationship of the texture in each case. This scenario would allow for 6 options in place of the existing 2.
SCENARIO 3: Replace Transparent checkbox with a color chip/palette and a "Reverse" checkbox. The color palette would allow for the application of a texture in any color, while choosing Fill: None would create Transparency. This scenario would allow for the greatest number of options.
Why is this feature important to you? Textures are unique to Fireworks and potentially very useful, but their implementation is incomplete. The use of 'white only' means that textures cannot be applied to a white object. Inverting a texture or applying a texture in color requires advanced workarounds and can lead to bloat. The suggested options would make the feature exponentially more powerful and intuitive.

Thanks, Jim! It is a very blog-like post. (I still haven't gotten around to starting a blog but keep thinking I should.)
I figured the clearer and more thought-out the presentation, the greater the likelihood it might get implemented. Also, I was originally stuck on Scenario 1 as a solution, and writing this helped me see other options.

What Do You think of My Feature Requests?

Hi, I submitted the following Feature Requests to the Premiere CC feature requests form.
I think Premiere CC keeps improving but there are some things that really annoy me. And below are some of my requests. I'd love to know if any of these requests are in error - if I'm actually missing something.
Thanks for checking these out!
*******Enhancement / FMR*********
Brief title for your desired feature:
AUTO-PATCHING
How would you like the feature to work?
When I select a Track Target - such as V1 Target - the Source patch should follow along. For example, if I select V1, then the V1 Source should automatically move next to V1
Why is this feature important to you?
This saves time and saves an extra, unnecessary step of having to move the Source patch.
This makes editing faster and more intuitive.
*******Enhancement / FMR*********
Brief title for your desired feature:
Increase/Decrease Volume using Keyboard for MULTIPLE CLIPS at once (between In and Out)
How would you like the feature to work?
1. Set in and out in the Timeline
2. Make sure Audio Targets are set for the tracks you want to affect
3. Press your keyboard shortcuts for increasing or decreasing volume
Result: All Audio volumes between In and Out go up or down by the same amount.
Why is this feature important to you?
This saves a lot of time. Currently, I have to copy and paste Volume attributes and that wastes time and is not as intuitive.
*******Enhancement / FMR*********
Brief title for your desired feature:
Select Nearest Edit Keyboard Commands Should Select All Nearest Edits on All TARGETED TRACKS, even if staggered
How would you like the feature to work?
1. Position Playhead near the edits you want selected (for Trim)
1B: Make sure the Track Targets for the tracks you want to affect are highlighted
2. Press the Keyboard Shortcut for Select Nearest Edit…
Result: Even if the edit points don't all line up on the same frame, Premiere should select (with a Roller, etc) ALL edit points NEAREST to the playhead on Tracks which have their Target buttons selected.
How it works now: Now Premiere only select those edit points that line up together the same frame.
Why is this feature important to you?
How Premiere currently works wastes a lot of time. It currently requires the editor to manually click and add other edit selections.
Currently, Premiere does not actually select all the edit points on SELECTED TRACKS.
*******Enhancement / FMR*********
Brief title for your desired feature:
REMOVE EFFECT - ALLOW US TO CHOOSE WHICH EFFECTS
How would you like the feature to work?
1. Highlight one or more Clips to select them.
2. Press the Remove Effects Keyboard Shortcut
What should happen: Premiere should present you with a window that allows you to check the effects you want to remove or uncheck the effects you don't want to remove.
Why is this feature important to you?
This is very important because often I have a remove just one effect on a large group of effects. I don't have the time - it would take forever - to go through each individual clip and eliminate that particular effect in the Effect Controls panel.
*******Enhancement / FMR*********
Brief title for your desired feature:
A Paste Insert should move the IN/OUT marks down the Timeline, just like the clips
How would you like the feature to work?
1. Set an In an Out point somewhere in the timeline.
2 In the timeline, after copying some material, PASTE INSERT, the clips in front of a whole bunch of other clips (also earlier than the In/Out marks)
What Should Happen:
Material AND In/Out marks should shift to the right to maintain sync.
What currently happens:
Premiere correctly shifts the Clips that follow the pasted material, Down the Timeline, to maintain sync. However, Premiere keeps the In/Out Marks where they are.
Why is this feature important to you?
I often copy material that's between In/Out marks and then go earlier in the Timeline and paste Insert that material. But when I jump back to the In point (Go to In) the In/Out marks haven't move and so I have to find my place in the material all over again.
It shouldn't work this way. It wastes time. And other NLEs don't do it this way. They shift the In/Out marks.

Nice requests. Just trying to be helpful here:
Re REMOVE EFFECT - ALLOW US TO CHOOSE WHICH EFFECTS
I agree - this could be quite useful. However, It sounds like using adjustment layers may be helpful for your workflow also?
Re: Increase/Decrease Volume using Keyboard for MULTIPLE CLIPS at once (between In and Out)
I've stopped using volume altogether now, and instead use 'Gain' mapped to "g" key in premiere keyboard layout. SUPER useful, for all the reasons you describe. I've never used I/O marks, but you can make big selections of clips, or a whole track's. Volume controls in Premiere, as far as I can tell, caps at +6DB for some reason. I routinely have to go much higher than that. also there is a very intelligent gain options screen that lets you bump your selected clips relatively by +/- DB levels; or set absolute values; OR set normalization targets. I LOVE IT, and its all I use now.
It seems to me that the audio component of Premiere if far more sophisticated than any other NLE I've used [ Avid MC, FCP...]. My only caveat is that volume and gain are not integrated across all methodologies. For example, you can have a volume adjustment on the clip, the track, and gain adjustments on the clip all operating independently- its alot to keep track of on projects that get passed back and forth between different editors with different methods!

+ Camera Raw Feature Requests +

UPDATE:
We're interested in what changes you would like see in our products. Do you have an idea for a feature that would help your workflow? Is there a small change that could be made to make your life a little easier? Let us know! Share an Idea, Ask a Question or Report a Problem and get feedback from the Product Development Team and other passionate users on the Photoshop Family product Feedback Site on Photoshop.com.
In future it would helpful if you could use this thread as a means to add
"Features" that you would like to see in future releases of Adobe Camera Raw.
Please do NOT create additional new Topics and try not to duplicate requests by other users. Also, be thorough in your description of the feature and why you think Adobe should consider it.
Oh, and if you find it necessary to comment on someone's feature request/suggestion, try not to get into a shouting match. The penalty for doing so is...
b If you're asking that a particular camera is supported in a future release or just taking the opportunity to carp that yours isn't then please do so in another thread!
IanLyons
Forum Host

Here's my wishlist for ACR. I'll list the feature first and then in a separate section afterwards, I'll explain why I want it.
1) Shadow/Highlights
2) Multi-instance and modeless behavior for ACR so I can truly have ACR open, Bridge open, PS open and work in all three and even open another ACR window.
3) The ability to open one image into PS and keep the rest going in ACR when you have multiple images open in ACR.
4) The point locator feature for curves like curves has in PS so you can find out what tone area on the curve a given area in the photo is, just by clicking/dragging over an area on the photo.
5) White balance assist to make it easier to get skin tones right when there are no good grayscale references in the photo.
6) An ACR pref to have a suffix automatically added to each filename when it goes into PS so after editing it in PS, I can just hit Ctrl-S and not have to manually add a suffix onto every single image I edit in CS.
7) A drag/drop bin for recently used saved settings in ACR and shortcut keys for cycling through a preview of those settings (described in more detail below).
8) A pref to allow the Save Images folder in the Save dialog in ACR to default to the directory of the RAW files rather than the last directory used.
9) More sophisticated sharpening in ACR (like smart sharpening).
10) Ability to set label or rating when only one image open in ACR.
11) Ability to delete and close when only one image open in ACR.
12) An easier way to see how a rotated image looks. There is no way in ACR to see the straight version of an image you've rotated slightly.
13) Shortcut keys to cycle through saved curve settings.
Here's the explanation for why I want each of these:
1) Shadow/Highlights. A significant percentage of my images need no other adjustments in PS except shadow/highlights and it's a big workflow savings to be able to finish a picture in ACR instead of having to take it into PS.
2) Multi-instance and modeless. The CS2 behavior is better than it was before because you can set it up for Bridge to host ACR and still be able to use PS. But, I often open many images in ACR and the current design still forces me to serially finish all those images in ACR before I do anything else becuase I'm blocked from going back to either Bridge or PS (depending upon who's hosting ACR) and I can't open any other images in ACR. This forces a serial workflow when sometimes I'd like to be able to be in the middle of one workflow (a hundred images open in ACR), but go do something else in Bridge and PS for a short period of time. I can't do that today.
3) The ability to open one image from ACR into PS while keeping the other images in ACR. When I see the preview in ACR, this is often the first time I've seen my images at any decent size. I often find I want to take a few into PS just to see how well they fix up with certain changes or to see if they benefit from things I can do in PS and can't in ACR, without discarding all the other images I have in ACR at the time. So, again, I am forced to serially finish all the image I have in ACR before I can take any into PS. I'd like to be able to open the selected images in PS and keep the others in ACR.
4) The point locator feature that PS has in the curves dialog is very valuable for finding out where on the curve a given feature in the photo is. I'd like that feature in the PS curves.
5) White balance assist for skin tones. One of the hardest things in ACR is getting the white balance right for skin tones when there is no easy gray reference in the photo. I don't know how it would work (I think this is an area for your invention and cleverness), but I'd like some sort of white balance assist that helps me pick a white balance that leads to a pleasing skin tone. I'd be willing to tell ACR where the skin tone is by pointing at it.
6) I add a suffix of "-edited" to ALL images that I open in PS from ACR. That means I have to type that suffix on every image when I hit the Save command in PS. I'd like a preference in ACR to automatically append a suffix onto the filename when it goes into PS to save me that typing on every single image. I've even tried to figure out if I could write a script in PS to do this for me (if file extension is a RAW file extension when user hits save, then add default suffix to the filename before Save dialog comes up), but I haven't figured out whether it can be done via script or not. I know that others save their PSD or JPEG files to a different directory than their RAW files (I keep all of mine in the same directory so this isn't an issue for me), so I imagine they'd like the ability to specify a default relative path also to save having to point every PSD they save in PS to a new directory.
7) Drag/drop bin for RAW settings. In a workflow of processing 200-800 RAW files, I'd like the ability to easily and temporarily save a small number of RAW file settings (10 would do). I know you can do it in the pull right menu in ACR today, but that's too much typing and clicks to make it worth it. I'm looking for something that allows me to pick a bunch of files from a shoot, identify a representative "sunny" shot and drop it's settings into a bin that I quickly label sunny. Then, when other sunny shots come up, rather than having to scroll around to find that image or go back to bridge to find that image, I just drag it out of the bin an drop it on the selected images. I don't want it to persist globally because then they pile up and I have to clean them up. I do need them to persist between ACR sessions as long as Bridge or PS is still running because I often process my RAW files in many ACR sessions. The whole point is to make an easy place for me to deposit a small number of saved settings so I can easily (very few mouse clicks or keystores) use them again while processing the same shoot. It's all about speeding up the workflow and letting me re-use work I've done earlier in the workflow. In my experience, this happens most often for white balance and curves since I'm more likely to tweak exposure on nearly every shot anyway.
8) When I hit Save Images in ACR, it remembers the previously set directory. In my workflow, I want it to default to the directory of the first image I'm saving. The way it is now, it is NEVER the right directory so I always have to change it. It could be smart enough so my normal workflow never has to change it. Even better, I'd get to set a pref that was a relative path from where the first image is located. So, when I'm saving JPEGs, I could have a default path of ./JPEG (a sub-directory under where the RAW files are located). Other people would want ../JPEG (a sub-directory at the same level as where the RAW files are stored).
9) In the spirit of getting as much of my work done in ACR as possible, I'd like to see a unification of the sharpening functionality so that ACR can do smart sharpening with all the same features. That would again keep many of my images out of PS and drastically improve my workflow.
10) I'd like the ability to set a label or rating when there's only one image open in ACR. Because you can do this when you have multiple images open in ACR, I'm programmed to set this in ACR, but that workflow programming is busted when I only have one image open.
11) I'd like the ability to delete an image from ACR when there's only one image open in ACR. Just like with labels and ratings described above, I'm programmed to want to delete a ruined image when I see it up close in ACR and determine it's no good. In this case, I think I'd like to just hit the trash can icon and have the ACR window close and have the image deleted in one single step.
12) When I straighten an image in ACR, there's no good way to see how the rotated version looks at full size. All you get to see is a thumb in ACR (if you have multiple images open) or a thumb in Bridge. To see whether it rea

Shadow and highlight clipping

Over the past few weeks I have noticed something with correcting shadow and highlight clipping in LR 5.7 and 5.7.1 I was not aware of and would like some opinions.
In one sentence, it appears that there is highlight clipping both in the White and Highlight portion of the histogram and shadow clipping in the Shadows and Blacks portion of the histogram. Up until recently I had assumed that if I wanted to globally recover highlights, I had to bring the Whites down. However, I have now seem quite a few photos, taken with different cameras (all Nikon), where the highlight clipping warning only went away after reducing the Highlights by -5.

What you are seeing is perfectly normal for images with moderate to high dynamic range. The LR PV2012 Tone controls should be adjusted using a top-down workflow. Here's what I have found that works well:
PV2012 Basic Panel Tone Control Adjustment Procedure
Start with all of the Tone controls at their default 0 settings and adjust them from the top-down in the order shown below.
1. Set Exposure to correct midtone brightness ignoring the highlight and shadow areas for now. Setting Exposure slightly higher (+.25 to +.50 EV) than what looks correct for the midtones seems to work best with most images.
2. Leave Contrast at 0 for now. It’s usually better to adjust this after the first pass.
3. Adjust Highlights so that blown out areas are recovered and “fine tonal detail” is revealed.
4. Adjust Shadows to reveal fine detail in dark areas. For most normal images simply setting +Shadows = -Highlights (Example +50 and -50) works very well.
5. The Whites control sets the white clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
6. The Blacks control sets the black clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
7. Now go back and adjust the Contrast control to establish the best midtone contrast.
8. Lastly touch-up the Exposure control for the best midtone brightness.
9. If necessary “touch-up” the controls using the same top-down workflow.

Feature Requests for BlackBerry10 OS

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
This thread has been closed and is continued in this new thread here:
Feature Requests beyond BlackBerry OS10.3.1
Please click on that link.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Let's use this thread to list BlackBerry10 OS feature requests. There's nothing official to this thread, but one never knows who might view it and get an idea or two to move foward.
Please let's keep it to feature requests with simple short statements and comments, in this manner:
1. Ability to lock the volume keys (since they are so easliy pressed when retrieving from holster)
2. Personal distribution groups Address Book
4. Add BBM Group icon to home screen
**This thread is not for bug reports (i.e., the calendar glitches when I set the date) or for debate or discussion of the worthiness of a feature request.
So, what would YOU add to BB10?
What do YOU need to make the OS platform work better for you?
Here are the collected feature requests as of 04 April 2013. Thanks for Ride_The_Sky for helping collect these from this thread.
There are listed in no order, just as collected.
Ability to lock the volume keys (since they are so easily pressed when retrieving from holster)
Personal distribution groups Address Book
Add BBM Group icon to home screen
Way to add line carriage to BBM messages
Why doesn't the most used name come up first? <- In latest OS, there is another line with most common contacts, but when typing it won't provide most commonly emailed contacts.
Bring back the option "Send As" or include this option in "Share"
Enable word wrap when zooming in to emails and messages.
Import Distribution lists from Outlook on your desktop to your Z10?
*The option* to always show the hub main screen when opening the hub, so when peeking it always shows the hub even if you leave it in another screen.
Offer Balance without BES to have two workspaces in device.
Delete on Server/Device/Both
Delete on Server but Keep on Device (This is going to be tough since EAS does not work like POP, using POP you can do this by deleting on server after sync)
Auto power on/off or Auto Do Not Disturb / Scheduled Airplane Mode / Scheduled Silence Mode / Scheduled Custom Profile
Default Currency Option
More options to lower data usage in e-mail (Headers Only / Roaming Profiles)
Snooze a notification/reminder for more than 5 minutes.
Customized Notifications
Disable certain accounts to stop receiving email or notifications from them temporarily to avoid data usage.
Way to delete recent pictures, videos.
Office Hub customization, sorting, editing, etc., on the fly.
Select which contact groups to sync, and ability delete all contacts.
Larger text select tabs
Add more options to dropbar.
Improve browser functionality and display, add customization and management of Bookmarks.
Calendar in Landscape mode
Option to Disable shutter sounds in camera.
Auto BCC option
Multiple appointments in lock screen, not only next one.
Increase email check frequency, custom minutes (possibly battery concern, most accounts use push nowadays)
Ability to hide "texting" numbers such as Work, home, etc that aren't able to receive texts
Ability to have multiple mobile numbers, such as mobile1, mobile2, for people with more than one cellphone
Ability to have multiple work numbers, home numbers, etc
Ability to have option for actually creating "custom" names for phone numbers, emails, VOIP,
Ability to have multiple WORK emails fields for same contact ...
Ability for a custom note field for each contact, for misc information such as store hours, reference numbers, business account numbers,
Ability for filter or unselect specific Twitter, LinkedIn, Facebook contacts so they all don't appear
Ability to "share" contact info with someone else ... like a vcard or the like
Ability to have custom Individual text and ringtones for each contact set within contacts app
Vibrate option for Alarm
Mail Filters for Priority mails.
Option to block ringtones from music app (i don't see ringtones in my music app, I guess poster refers to custom mp3 files)
Swipe down to close, up to minimize (but some apps have menus associated with swipe up gesture)
Swipe half way up the screen to minimize an application to an active tile.
Swipe it all the way up the screen to close the application.
Playbook app switching gestures (swipe sideways, I guess this won't work since there are other gestures associated with side-swiping)
Lock screen with gesture (or maybe they should just add a button on home screen, somewhere on top or bottom)
Airplane mode on status bar options.
Option to customize status bar with select Settings/Options.
Colors for Hub!
Face recognition for camera, being able to associate contacts with faces or pull info from Facebook, etc.
Weather info on Lock Screen (if I may add, and constant info on top status bar, simple temp info should be enough)
We need groups back in contacts please.
Import text messages in various formats from various systems.
Sorting and Ordering of the way contacts are displayed depending on account.
While editing an entry in calendar, notification about a recent call may cause loss of data in that entry.
Location for Calendar entries and be able to see it on the map with a tap.
Being able to see multiple pictures from an email by swiping left and right to see next/previous without having to reopen (I must say the same thing is needed for App World, why can't we just scroll through screenshots??)
Multiple flags or ability to set a flag date, associate with a reminder.
Move people from TO to CC or BCC easily (If I may add, also ability to backspace to delete a contact without having to tap the X in blue box).
Option to add favorites to Hub for easy to reach contact management (I think it is same as going to contacts and choosing Favs)
Being able to answer and make calls when the phone is locked.
Add more colors to LED notification (I think they are there now, orange, green, red so far, did not see blue, I don't think blue is needed in my opinion)
Change the way to add date and time for appointment, rollbar is too slow and too sensitive.
Dismiss and Snooze buttons for Alarm to be different colors, larger, easier to notice.
Make it easier to order world clocks, instead of the order they are added.
Alarms based on days/schedule.
Easier way to get to the bottom of e-mails (I think it scrolls pretty fast, I think poster wants "B" shortcut)
Easer way to get to the bottom of web pages (same as above, space or B shortcut?)
Add option to ask if you really want to dial, instead of just dialing right away every time a phone number is clicked/tapped on.
Ability to resize image before attaching to an e-mail.
More than 30 days email sync on device, please!
Make BB boot up slower, so we can actually get to do something else while waiting for it to start!
SSH client would be nice.
Another keyboard like Swipe (honestly, I have never typed faster in my life on any other on screen keyboard, Z10 keyboard is awesome!)
Volume lock/unlock button on demand.
Auto Run app on device boot up.
Lock or Pin apps.
Ability to run background apps (Google Talk is running in the background, or it is tricking me, I don't know but I am getting messages from it when it is shut down on BB10, I hope they do Skype the same way)
Ability to have multiple documents of same type open at the same time (tabbed docs2go)
Calendar sharing of BB10 users in the area/company/group.
PIN Messaging to return.
Preview e-mails, calendar and other information on lock screen (privacy?)
Way to clear anything in any "Recent" menu, videos, pictures, etc..
Ability to hide apps, docs, pics, videos, folders, etc..
BBM Group Picture notification.
Support WhatsApp more.
Another tap for important numbers (Favorites work for this, and on top of speed dial)
From Call Menu when going into contacts, it should be ready to search with keyboard out.
Option to customize volume key to act as page up/down, etc depending on app running.
Red star in app world (means you need to run Updates, just refresh and check by swiping down from top)
Better headphones with the phone (hey, we didn't even get any!)
Better night shots in camera (hardware or software improvement?)
Ability to choose which address book to sync with bluetooth car.
When app is opened from a folder three or four pages into apps list, we hope the screen can go back to that spot when the app is closed (sadly it uses active frames at the moment)
Change acceptance of auto corrected key, instead of space key, make it something else (actually, you can just backspace to un-autocorrect it back to what you typed).
Ability to load certificates (X 509 S/MIME and/or PGP/MIME) from a computer
Ability to sign and or encrypt emails (POP3) before sending (As in MS Office Outlook)
Ability to receive and recognize signed and or encrypted emails (POP3) (As in MS Office Outlook)
Add a password/certificate manager that doesn't require manual copy/paste
Ability to encrypt the memories Device and Media of the Q10 like it is done for the BB9900
Ability to encrypt selected folders (preferably by Private Key)
Ability to create Self-Decrypting Archive like in PGP
Ability to delete email-messages by group as an alternate option to one by one
Opening Video-chat to non-BBM users (Skype for instance)
For above encryption request, SecuSmart was suggested...
Renaming the file without extension can break the file or hide it from pictures list.
Wallpaper scrolling sideways.
Standalone e-mail app (not sure how different it is than choosing emails-only for hub)
Different colors or small tabs in different colors for different accounts in Hub.
Share webpages with smart tag (I think you can just create it by pasting the URL into create QR)
Application management (being able to see which app takes up how much space, etc..) CPU/Memory/Battery Usage/Data Usage/Storage Usage in more details
Custom vibration options.
Move Send button in BBM to avoid accidental submission of message
Forward As… SMS, MMS, EMAIL from one to another.
Send SMS to new numbers (I think you can still do this from call log)
Single key press to change profiles.
Insert a picture into an e-mail. (I think he means into the body of email)
Turning off links of contacts (I think poster did not have multiple accounts, actually BB10 goes ahead and adds all new contacts into all address books in all accounts without user permission.. Create a contact in Hotmail? Gets copied to Gmail.. and then linked, terrible implementation in my opinion)
Presets for browser bookmarks, faster access to bookmarks. (My suggestion was to create a home screen, select 12 icons 3x4 or 16 icons 4x4 as home screen/start page)
Being able to allow flash based on website/url/server.
Ability to adjust different sounds/volumes for different BBM users/groups
Better Voice Dial and Voice Commands (shorter and easier operation)
Ability close one or all web pages/tabs, add "Close All" button.
Call Recording
Faster way to delete e-mails, such as file icons next to e-mails, or Swipe to Delete! Swipe to File!?
Customize email signatures with formatting.
Phone to stay on screen (dial pad always available in panes)
More Options for Clock.
In Playbook we can have a single character password, why not on BB10? "too short" well it is my decision, isn't it?
There is no way to go next/previous while reading an e-mail. Please add these functions.
Add to the e-mail client, Next Unread / Previous Unread.
E-mail or Hub should have more buttons at the bottom in landscape mode. Why keep only three (or four in e-mail view) buttons when you have the real estate. It would be extremely handy if you allowed users to edit which buttons should go at the bottom. Next Previous is really needed while reading an e-mail. For example I would love to add "File" button at the bottom as a shortcut instead of forward, I rarely forward, but I file all the time. Maybe allow users to have two row of keys, add next/previous/unread. Or it could be done with a gesture. How about swiping the account name (top blue bar while reading e-mail) left and right?
When you create a new contact in BlackBerry, it gets synced to all accounts on the Hub. There is no way to limit the new contact to a specific account.
Sometimes when you file an e-mail to a folder, it stops and waits few seconds with no message. Even when it files immediately, there is a confirmation message that takes time to appear and disappear, and the folder list does not disappear automatically.
Messages filed automatically by server using server side filter rules are still showing up on Blackberry hub/inbox. In older BB versions the filtered messages did not show up in the list, filed messages still did.
When you filter your e-mails using Filter / Unread function, new unread e-mails do not show up until you close the filter and re-open. It won't just keep refreshing your screen with unread e-mails. Can BB add a button to the hub "Unread Hub" so when hub shows 8 or 2, you can actually see unread items easily without having to through so many taps.
Native BB QR scanner (Smart Tags) does not work with barcodes (it only scans with no way to use the information). There is Open In function but it doesn't work properly.
We need to add more customs search providers, and be able to add custom search strings/wildcards. For example currently there is Google, Bing, Yahoo, Foursquare, etc..
I hope BB introduces the ability include more standard & custom searches, IMDB, PriceGrabber, Ebay, Youtube, XYZ Forums, ABC Newspaper, 123 Database, Etc.. Most sites nowadays provide search string in their URL Search=?* etc...
None of the Battery apps can access system settings to add a battery icon to the top. I wish battery percentage was there.
There is no way to check carrier/mobile signal strength.
Blackberry, please add the date and carrier / SSID info to the top. Sometimes we just want to glance at the top to see the date without having to swipe.
Please bring back keyboard shortcuts. Since we can easily swipe up to bring the keyboard, just add keyboard shortcuts in e-mail, phone (true speed dialing, dialing by word?), and browser, etc.. if possible. I could always call 1800SOMETHING# now I have to look up the number or use dial pad.. Please bring it back.
Camera zoom function needs to be fixed, also please include option of fixed focus by tapping on the screen to focus. The auto focus in video is focusing in and out to various objects all the time. Stabilization feature also causes tearing/ripples, I guess it is good if you are stationary. Or use Volume Keys to Zoom.
Please allow more than 12 icons in an icon group/folder, I hated Apple for limiting apps per folder, please fix it.
Auto ON/OFF feature is not there anymore. BB should consider Auto DND (DoNotDisturb) or Auto Silent/Airplane modes instead.
Please find a way to stop the music app from automatically starting up every time it connects to bluetooth like car audio. This is very annoying.
No Panaroma mode in Camera app, why not? It is very easy to incorporate. This could be a nice addition to next release, and easy.
The text selection grips needs to be a little bigger, sometimes I cannot see where I am moving them, they work better in Playbook, nice big tabs.
Call Functions, before answering a phone add sideways gesture functions, like swiping right will forward the call, swiping left will answer with a test message, etc..
Or there should be a way to reject the call without sending it to voice mail, phones had this function a decade ago, I don't know what happened to it.
We used to be able to see the "History" without having to save the contact. Now I don't see any way to "View History" of a certain phone number, it just keeps adding
them as individual entries to the log. Now I can't see when was the last time they called me, how many times we spoke which day, etc... I loved this feature in BB5.
Where is BB Traffic? Where is BB Weather, without having to run an active frame? It will eventually disappear if you run too many apps. I liked a little Icon that shows me what the temp is, instead of running a whole app.
There is no Skype. This day and age with all other platforms having it, please either get skype (Microsoft) to cooperate, or open up BBM to other platforms. If necessary, pay Skype to develop the app, then charge BB users for the app. Most will gladly pay.
Can we tap and hold on an active frame to pin it, or can we pin two favorite apps between Call and Search & Search and Camera buttons in the bottom bar? How about Close All running Active Frames app to quickly free up ram?
I hope next generation devices have two speakers or speaker that is facing forward. When playing games or watching videos in landscape mode, I find my palm muting the speaker. I have to hold it gently with fingers to have a gap in between, something I don't want to do when I am on the subway or bus.
Blackberry Maps should have a Zoom In/Zoom Out buttons, sometimes using it with one hand, it is impossible to zoom in and out. (Zoom in is OK but we can't zoom back out)
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Solved!
Go to Solution.

- ability to choose deletion of an email on handset only
- desktop software working with all older BB's allowing drag and drop type of transferring data, contacts etc. (BB link doesn't recognize my old Storm)
- auto power on/off
- contacts syncing with yahoo & Outlook (almost two weeks trying to work around it and no luck)

Feature Request: Raw-Lite for the F5/F55

Hi Sony Staff, Here's a feature request that I've been pondering for a long time now. Raw Lite on the F5(5). Is it a possibility? I'm a huge fan of the conventional 3:1 compressed 4K 16-bit Linear Raw from the AXS-R5. It provides a supremely high quality digital negative, with as much detail and tonality as you could ever really need. However the file sizes are very large. 1TB yeilds roughly an hour of recording time. And the storage costs associated with that are enough to scare away MANY producers from shooting Sony Raw (even with all of the benefits that doing so offers). You guys have addressed this issue nicely with the F65 by offering Raw Lite with it's 6:1 compression (which coincidentally, is a compression rate that many, many producers are content to shoot with on the most prolific raw cameras out their - the Red Epic/Dragon/Scarlet cameras). Being able to offer producers the option to shoot Sony Raw Lite, with it's massively more managable file sizes would greatly increase the uptake of Sony Raw for production - and that benefits everyone. It benefits the camera department with a superior digital negative, it benefits post-production with greater latitude for grading and VFX, it benefits producers with a superior end product, and it benefits audiences with better looking images. Given that the F65 was able to be upgraded to offer this additional raw recording option, I assume (and hope) that it's not an impossiblity for the F5(5). So I'd urge you to strongly consider this feature request, and the added appeal it would bring to the cameras as a capture choice. Cheers, Mark

I disagree that there is little difference between 12bit and 16 bit linear raw. The difference is huge. Shadows and dark areas from the FS7/FS700 are pretty grim, lot's of noise caused by the data rounding. Besides, in terms of bit rate it's not a question of simply reducing the bit depth, you need to increase the compression. For linear raw you need 16 bits unless you do an extreme amount of data rounding. For Linear raw, if the first stop is represented by just 2 bits of data (which results in very blocky noise as noise will be one of 4 luma levels and cannot be smoothly reproduced): stop 1: 2 bitsstop 2: 4stop 3: 8stop 4: 16stop 5: 32stop 6: 64stop 7 128 (8 bit linear limit, 128 + 128 = 256 bits)stop 8: 256stop 9: 512 (10 bit linear limit)stop 10: 1024stop 11: 2048 (12 bit linear limit)stop 12: 4096stop 13: 8192 stop 14: 16384 bitsstop 15: 32768 bits (16 bit linear limit) If you move this scale up so that the first stop is represented by using 4 bits of data you will still have pretty coarse shadows and noise (one whole f stop will only have 16 posible luma values). So rather than just use binary math most linear raw systems use floating point math to make more bits available for the shadows. But with 12bit there just isn't anywhere near the same amount of "spare" bits that you get with 16 bit, so the shadows and low key areas really suffer. Just go and look at the FS7/FS700 boards and all the compliants about unusable, grainy and blocky shadow areas in the raw. Sure raw lite would be a welcome option, but it wouldn't be one for me. The whole point of raw for me is a robust, bomb proof format that you can expose and grade as you wish without worrying about artefacts etc.

Feature Request: Modify Audio Channels from the Timeline in Premiere CC.1

Why have we never been able to modify audio channels once a clip is added to a sequence? I'm guessing there's a good reason Adobe has never had this feature. The lack of this feature is explicitly mentioned a few times in the audio section of the Premiere Pro CC manual, as if it's a benefit NOT to have it. But the benefit is entirely lost on me.
In my workflow, I synchronize my double-system video and audio before anything else. I do this in PluralEyes (and unfortunately I'll have to keep doing it this way, until PPr's sync on sound feature gets fixed—for me it's never worked).
Once PluralEyes has synched hours of footage and audio and placed it on a PLURALEYES GENERATED sequence, I import that sequence into Premiere. Note: Since I haven't gone through the step of creating a blank New Sequence, I don't get the opportunity to setup my audio channels the way I'd like in my sequence (i.e. Stereo recordings should occupy ONE track, not two. Typically these tracks come from a camcorder and are used for reference sound, or ambient noise at best, so I don't need them taking up precious real estate in my sequence).
Since PluralEyes doesn't merge my clips for me (or rather I don't want it to since I'm usually doing multi-cam sequences where I want to keep all 14, or so, tracks of audio), I have to go through the clips one by one and do a Merge Clip action once I've adjusted any minor sync issues, or determined which tracks I actually want to keep. But, and here's the key, at this stage I'm not yet 100% certain whether I'll use the nat sound or the wireless mic sound (separate audio recorder, etc). Furthermore, I don't really want to think about that at this point. After I've spent a few mind-numbing hours just ingesting files, sync and merges, I want to jump into the edit as soon as possible, before I lose all will to finish this edit. If I modify my audio channels right now, I'll lose the ability to make some creative decisions later on.
I'd like to start whacking out an assembly edit. And then after I have a rough program, I can start looking at which audio tracks (nat or double-system) I like better in each circumstance. This is where I become stumped that at this stage, I'm locked into whatever audio channels I've setup (or not) in the earliest stage of the edit, back before any media was actually on the timeline! It's at this stage, and usually only at this stage that I want to start Modifying Channels—FROM THE TIMELINE!
Does anyone else feel the same? If not, what is your workflow?
Feature Summary: Right-click on any clip, (master clip, sub-clip, merged, nested or otherwise) in the timeline and choose Modify > Audio Channels.
I've submitted a feature request, with a link back to this discussion, so please pipe in—especially if you want this feature.

Maybe its your specific workflow, asset mangement and use of a 3rd party application that runs you into an issue.
Take Pluraleyes out of the equation, I would imagine my workflow is the same as most everyone else. Find footage in the Media Browser. Import it. Create a Sequence and start editing. Use the Source Monitor to set Ins and Outs and then Insert the clip on the timeline.
At this point, if the audio needs to be modified, it cannot be done on the Timeline. The workaround, of course, is to Find Clip in Project; Modify Audio in the Project panel; then do a Matchframe to replace the audio clip. This works, but requires many steps per clip. Also, Matchframe in Premiere Pro CC is not reliable.
Introducing a new Modify Audio (from Timeline) feature as seen in the fantasy screenshot above would solve it.
I dont use Pluraleyse ...which I understand to be a synching aid...so I dont know the workflow it imposes on one .
Returning to Pluraleyes workflow, this issue is compounded by the need to Modify almost ALL audio. Every stereo track is separated and placed on two MONO tracks taking up precious real estate. This is not something Pluraleyes imposes. It is due to the way Premiere imports XML timelines. This would apply to sequences imported from Final Cut as well.
In this case it would be ideal to select both the LEFT and RIGHT mono tracks and choose "Modify > Audio Channels > Merge L/R Mono to a Single Stereo track." Ideal? No. I guess Ideal would be if Premiere would interpret XML files properly in the first place.
What actually is the issue with Premieres synch and merge workflow in your case?
Audio Sync in Premiere Pro doesn't work. Period.

Import Feature Request...

Having used Lightroom for sometime I have a feature request dealing with the
importing of images in to Lightroom.
I would like to see the ability to have Lightroom look at each image it
imports and based on where the image is dark, light or in the middle it
would apply a different preset to them. For example if Lightroom found that
60% of the pixels in the image was dark colors it would apply a preset that
I create for dark images that would lighten the image. If it found that 40%
of an image was light colors it would apply a preset I create that would
darken the image. If it found that 50% of the image was dark colors and 50%
were light colors it would apply a preset that I create that might up the
saturation and other things but not adjust the exposure any.
I would like to see the percentages that Lightroom uses to make these
decisions adjustable by the user. For example for an image to be considered
dark it would have to have 80% of the pixels dark, etc. I would also like to
see this feature be able to be turned on or off by the user (for those that
don't want to use it) as I realize this could slow the import process down.
And, while it would make the importing slower I think it would mean less
work for the user later.
Also, maybe instead of looking at all of the pixels in the image one by one
to make a decisions on how light or dark the image is it could simply create
a quick histogram and use that. It seems like histogram generation in
Lightroom is pretty fast and this may keep the import time down to something
that isn't so bad.
As it is right now, I see little point in having a preset applied to the
images I import as very seldom do all of the images I import in to Lightroom
would work with the same preset. I think a setup like this would cut down on
adjustments later.
Robert

The problem with the auto preset is that the current auto functions in
Lightroom just kind of suck. On all of the images I have used it on it blows
everything out and this is even on images that already have plenty blown
out. I have yet to see it darken an image.
I also want to point out I am not asking for an auto feature I am asking
that options be added that lets the user apply a preset (any preset they
want) to images that are too dark, too light and 50-50. This is a far cry
from the auto functions that are in LR now.
If you apply a preset to images that are dark and that preset ups the
Exposure to +1, etc. the chances are good that it will get your image much
close to what you want. Just like applying a preset that adjusts the
exposure to -1 on images that are very light. And, of course the user can
control the threshold that LR uses to decide if an image is light, dark or
50-50. You can also turn this off if you don't want to use it. There really
is nothing auto about my suggestion since the entire process is controlled
by the user. It just saves you time of waiting for an import to complete and
then going through your images manaully and apply a lightening and darkening
preset to the appropriate images.
Robert

Feature request - Grain adjustment shadows/midtones/highlights

Similar Messages

Maybe you are looking for