Feedback visible for all users?

Hi,
we want to use the feedback option in KM. In the feedback iView under Details SAP says "Feedback allows comments to be sent to the item's author, who finds all feedback listed here. You only see feedback you have sent. You can delete your feedback later."
Our problem is that all users can see and delete the feedback from all users. I tried to change permissions for the resource but had no success.
Any ideas? We are using EP 7.0 SPS 9
Regards,
Mario

Hi,
Please read the following information:
http://help.sap.com/saphelp_nw04s/helpdata/en/3a/d609f7803111d5992f00508b6b8b11/frameset.htm
http://help.sap.com/saphelp_ep60sp2/helpdata/en/90/7aa6930cb5d24388a2e988f6616231/frameset.htm
When you add feedback you also have to change the service permissions.  Only changing your permissions is not enough
If you have done that, other people are not able to change or delete your feedback...

Similar Messages

  • How to make feedback visible to all user having read permission

    hi,
        for a document , a user is giving a feedback. my need is how to make that feedback visible to all user. all user are having read permission only.
      help will be appriciated
    Regards,
    Shanthakumar.

    Hi,
    Normally we use feedback as an explanation by an approver to the previous approver about his action on the doc( reject/approve).
    I think you want ur users to view the doc and then give suggestions to make it better and these comments should be approved and then made visible.
    I replied on one such thread earlier too.
    Please have a look at this [thread|https://www.sdn.sap.com/irj/sdn/thread?threadID=816692]
    I hope it helps.
    Regards,
    Sumit

  • Make application visible for all users

    New user of Imac..... Different users set on my IMac. How to make new applications visible by all users ?
    thanks

    Any  application installed on the computer by default is usable by all the users. If you have an app you want in each users Dock that isn't there by default here are instructions. Locate the app in the Applications folder and drag it to the Dock for each user.
    As someone new to OS X, I'd recommend bookmarking and using:
    Mac 101
    Switch 101
    Find Out How Video tutorials
    List of Useful URLs for switchers

  • Comments on MacBook Pages– how can I make them visible for all users?

    When I use Pages on my MacBook, the comments show up as black text in a yellow box on my computer, but when I export it as a .doc and email it to others, it shows up as white text on yellow for some PC users. This makes it hard for them to read my feedback. Why does it do this? How can I prevent it?

    hello, can you try it with the method described at [http://kb.mozillazine.org/Locking_preferences]?

  • System msg that are visible for all users

    Hi
    Does any one know how to create a system msg, that users logged on to ex. /rep, /rwb will see, in ABAP i know you can use SM02, but how to do it in J2ee im lost.
    Thanx for your info.
    //Tord

    Hi,
    AFAIK, you can set the System Msg for SLD (SLD -> Administration -> System Message), but not for IR/ID.
    Yep, as mentined by Ricardo and there is one more option "Display System Message".. it means, we can create system messages.. i guess try to look in VA, may be u may get an option to create this there.
    Message was edited by:
            Vijaya Lakshmi MV

  • SCSM - Service Request Area list - modifications not showing for all users

    Hi All
    As you cant edit the Service Request Area list, i've settled on changing the default display names to better reflect the categories we want for our SR's. The changes i've made are visible in SCSM on my computer (where i made the changes from), however if
    i fire up another instance on a different computer - i can only see the defaults. Anyone seen that before? Typically when i make any sort of change to a list item it is visible for all users.
    I'm aware that there is a custom MP out there to allow you to have your own SR Area List, however i was not able to get it to work in our environment (link: http://gallery.technet.microsoft.com/Custom-Service-Request-e4d40738/view/Discussions#content)
    Any help would be appreciated.
    Thanks

    Have you made sure that the selected language in both consoles (the one you are editing from and the one you are testing in) are the same?
    When editing lists you will only be asked to save changes (be that changing existing values or adding new ones) if they are stored in a sealed MP - which they should be according to best practice.
    If you are not asked which MP to save to then you have already "commited yourself" to a specific MP. You could delete this MP (if there is nothing but the list values in it) or delete them one by one using the console. Then when back to square one the console
    will once more ask you which MP to save changes to.
    http://codebeaver.blogspot.dk/

  • Using Expression to send WI for approval, but it is visible in all users

    Hi All,
    I have a task which is for approval, and I am using Expression for agent finding, here i am sending one variable which i am setting from webdynpro component and setting this container element.
    Now the problem i am facing is many times this approval work item is visible in ALL Users inbox.
    I am aware of the fact that when i am using rule to find agent, then there if that rule is not returning any agent then it is visible in ALL Users inbox, and that too if "Terminate if Rule Resolution Without Result" check box is not checked.
    But if i am using Expression to send work item for approval, why it is visible to  all users inbox.
    Amar

    Hi Amar,
    It simply says that it couild not find any agent and your task is general task so it sends workitem to all users.
    Regards,
    Gurprit Bhatia

  • Setting visible lines and blank rows for all users

    At Item Level for Shopping Cart, Confirmation and Invoice Creation there are settings for Number of Visible Rows and Number of Blank Lines (In Settings/Advanced Settings).
    How can this be changed for all users?

    Hi
    This is a user specific settings to be performed. in SRM 7.0
    Please prepare a document and educate the user to do. This is  the best solution
    Second Solution
    In Setting tabs there are two tabs -Basic Setting and Advance Setting
    check the webdynpro components and hide this for all users
    Regards
    G.Ganesh Kumar

  • Adding a domain user to the admin role within the local user management breaks all metro apps for all users!!

    Hi,
    I have posted this in another large thread under the "Windows 8 General" group but have not had any appropriate feedback from MS.
    After hours of testing and working with other users I have managed to isolate a simple situation that breaks all metro ui applications within Windows 8 for all users on the machine. Here are my exact steps and notes.
    Before continuing if you are running Avast then your solution may be to turn of the behaviour shield functionality as this also breaks metro apps. This is NOT the problem we are having!
    I have performed 3 cleans installs after isolating the problem and am able to reproduce the issue every time using the same steps on two different machines. 
    First thing to say is that for us it has nothing to do with simply joining the domain, domain/group policies nor does it appear to have anything to do with the software we installed, the problem here is much more simple but the result is pretty terrible.
    Here are my exact steps of what I did to reproduce our problem:
    Complete format of HDD in preperation for a clean install
    Clean install performed
    Set up the machine initially with a local account
    Test metro apps - all working fine
    Open control panel from the desktop, click on System, change the system to join the domain, click reboot
    Log into the system using my domain account
    Test metro apps - all working fine
    Here's were the problem starts. I need my domain account to have admin rights on the local machine so I can install programs without the IT men having to come over and enter their password every 5 mins.
    I go to control panel via the desktop and click on User Accounts. From with here I then click on "Manage User Accounts". This requires the IT guys to enter their details to give me access to such functionality. This is fine
    In the dialog box that opens I can only see the local user that was initially created during setup. The "Group" for this local account shows as "Administrators" - Image included below (important to note that metro apps are working at this point)
    I click add and then add my domain account - also giving it administrator access
    Sign off or reboot to ensure the new security is applied
    Sign back in to the domain account
    Test metro - ALL BROKEN
    Sign out
    Sign in as local account
    Test Metro - NOW ALL BROKEN FOR THIS USER ALSO
    So as soon as I add my domain account to the local user accounts and set it as admin it breaks all metro apps for all users. This is on a totally clean install with nothing at all installed other than the OS.
    Annoyingly if I go back and change the domain account to a standard user or if I totally remove the domain account from the local account management system the problem does not go away for either user. basically it is now permanently broken. The only fix I
    could fathom was a full re install and not giving the domain user admin access to the local  machine.
    Screen one - this is the local user accounts window AFTER joining the domain and logging in with my domain account (All metro apps working at this point)
    Screen 2: User accounts AFTER joining the domain and AFTER adding domain account to local user management (METRO BROKEN)
    I have isolated my machine from all group policies so nothing like that is affecting me. Users I have spoken to in different companies have policies that automatically add users to the local user management. This means that metro apps break as
    soon as they join the domain which leads them to wrongly think it is group policies causing the error. Once they isolate themselves from this they can reproduce following my steps.
    Thanks

    Hi Juke,
    Thank you for the response and apologies for the delay in getting back to you. My machine was running a long task so I couldn't try your suggested solution.
    I had already tried running the registry merge suggested at the top of the thread to no avail. I had not tried deleting the OLE key totally so I did that and the problem still exists. I will post all the errors I see in event viewer below. For
    your info, since posting my initial comment I have sent out my steps to 7 different people and we can all reproduce the problem. This comes to 10 different machines (3 of them mine then the other guys) in 3 different businesses / domains. We see the same errors
    in event viewer.
    Under "Windows Logs" --> "Application" : I get two separate error events the first reads "Activation of app winstore_cw5n1h2txyewy!Windows.Store failed with error: The app didn't start. See the Microsoft-Windows-TWinUI/Operational log for additional
    information." The second arrives in the log about 15 seconds after the first and reads "App winstore_cw5n1h2txyewy!Windows.Store did not launch within its allotted time."
    Under "Windows Logs" --> "System" : I get one error that reads "The server Windows.Store did not register with DCOM within the required timeout."
    Under "Applications And Services Logs" --> "Microsoft" -->  "Windows" --> "Apps" --> "Microsoft-Windows-TWinUI/Operational" : I get one error that reads "Activation of the app winstore_cw5n1h2txyewy!Windows.Store for the
    Windows.Launch contract failed with error: The app didn't start."
    If you require any further information just let me know and I will provide as much as I can.
    Thanks

  • How to embed fonts in document for all users

    Hello,
    we are using a custom font for our documents. I know it's possible to embed fonts in document when saving.
    Is there an option to enforce this setting with a policy?
    I cannot find the right policy in the Office Policy templates.
    We are using Office 2013 x86.
    Thanks in advance.

    Hi,
    Based on my knowledge, the option is document-based, we can't control this on the Policy level.
    If your request is to turn on this option for all new created documents. Since all new documents are based on the Normal.dotm template, a workaround is to create a new Normal.dotm template in which this option is checked:
    Browse to C:\Users\Username\AppData\Roaming\Microsoft\Templates, open Normal.dotm, tick the option and save it as Normal_1.dotm, save it in the same location.
    Then rename the old Normal.dotm to Normal.old, rename Normal_1.dotm to Normal.dotm.
    Open Word and create a new blank document, you will see this option is ticked.
    To deploy this file for all users, we can write a startup script. The process is like: 1. Remove the old Normal.dotm, 2. Copy the new Normal.dotm template from a network shared location to C:\Users\Username\AppData\Roaming\Microsoft\Templates.
    I hope the information is helpful to you.
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • How to make warehouse field inactive for all users in all documents autom.

    Hi All,
    Can anyone pls tell me "**how to make warehouse field inactive for all users in all documents without having to do it through form setting** "for each and every user. It should be visible but inactive
    Thanks & Regards,
    Mukesh Agrawal

    Hi,
    As a work around create a warehouse SelectWH and map the mandatory acoounts as a On hold account(in chart of accounts).So there will not be any posting on this account.
    And set this warehouse as default warehouse for all users.
    So without selecting the appropriate warehouse the user can not add the document.
    I think this might resolve you issue.

  • Default Color, Size and Font for all user.

    Hi
    I have been looking around for the correct way to set some default styles for all Word users in a domain thrugh GPO. I just have some questions.
    So far i can only get it working if it set a "Workgroup templates path" under "User Configuration/Administrative Templates/Microsoft Office 2013/Shared paths". Then the users are able to select it when they say "New" - "Shared"
    and then the template
    But i would like it to be default for all users, like in the Normal.dotm. But without making a script to replace the file for every users APPDATA.
    Then i saw the "User Configuration/Administrative Templates/Microsoft Office 2013/Shared paths/Enterprise templates path", how and what does that do?

    Hi,
    As far as I know, if we want to distribute the Normal.dotm to users in a domain through GPO, we could
    use GPP file extension to
    distribute Normal.dotm to the path "C:\Documents and Settings\user name\Application Data\Microsoft\Templates." for every user. For more detailed steps, please refer to the following link:
    http://technet.microsoft.com/en-us/library/cc772536.aspx
    Similar issue:
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/87ab10d3-1cb6-4269-9334-1e0c37527e0a/move-location-of-normaldotdotm-to-central-file-server-best-solution?forum=winserverGP
    If you want to config Enterprise templates path, please read this thread:
    https://social.technet.microsoft.com/Forums/office/en-US/c4e5c872-402c-4339-9c02-cfa91e949e41/office-2013-templates-group-policies?forum=officesetupdeploy
    If you have further question about the GPO, I recommend you post it to GPO forum:
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverGP
    Regards,
    George Zhao
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click "[email protected]"

  • Seeding the cache for all users

    We are facing some performance issues (even after using aggregate tables) and are looking into seeding the cache for all users so that the dashboard pops up immediately.
    So far I couldn't make it work. As Administrator I created an iBot to run a report for 1 month (dashboard has a dashboard prompt on the period) with Data Visibility set to 'Personalized (individual data visibility)' as I understood from the manual this is the way to seed the cache for all users. Now when I log on with my personal userid and set the prompt value to that specific period it is not using the cache.
    Obviously destination was set to 'Oracle BI Server Cache' and cache has been turned on.
    Does anyone have any suggestions ?

    We are facing some performance issues (even after using aggregate tables) and are looking into seeding the cache for all users so that the dashboard pops up immediately.
    So far I couldn't make it work. As Administrator I created an iBot to run a report for 1 month (dashboard has a dashboard prompt on the period) with Data Visibility set to 'Personalized (individual data visibility)' as I understood from the manual this is the way to seed the cache for all users. Now when I log on with my personal userid and set the prompt value to that specific period it is not using the cache.
    Obviously destination was set to 'Oracle BI Server Cache' and cache has been turned on.
    Does anyone have any suggestions ?

  • Report all activations of Office 365 ProPlus for all users

    Hello:
    I know that I can open my Office 365 Settings, Software, and see how many devices I have activated Office 365 Pro-plus on.
    What I am looking for is a way for an Admin to run a Powershell script (or command) to retrieve the activations for ALL users in a tenant.
    Thanks
    Tim

    Hi Tim,
    As far as I know, this is not possible. We can use Get-msoluser command to get the license status. But we can’t get details of all users’ activated computer name list for the Office 365 tenant with a Powershell script.
    By the way, this forum focuses on questions and feedback for Microsoft Office Client. There is not so much about Office 365
    console/hosted/cloud aspects here. For your case, I would suggest you to post in the forum of Office 365 Community, where you can get more experienced responses:
    http://community.office365.com/en-us/f/default.aspx
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Regards,
    Ethan Hua
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Message no visibility for other users

    Since I started working with Message Beta my account visibility for other users is offline.
    With 'the old'  iChat my online status was visible to other users.
    With Message however non of my chatfriends can see that i'm online even if my status shows online and visible in Message.
    The only thing other friends see is that i'm offline!
    Who knows the answere?

    Hi,
    If you have multiple accounts/Buddy lists go to the Messages Menu > Preferences > General Section and use the item to unlink the Buddy Lists
    Now check each one and also the setting to make them all the same.
    If that does not work try Deleting the Account and then re-adding it/them
    10:22 PM      Friday; April 13, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

Maybe you are looking for

  • Xorg + radeon crashing

    Hello people. I have an updated Arch Linux i686 install on an slightly old computer i built a while ago. Everything seems to be working, but after some time after logging in the screen and keyboad freezes and can't switch to any tty or do anything. I

  • SAP WAS J2EE server installation on Windows Vista

    Hi Experts, Is there anything latest on SAP WAS J2EE server installation on Windows Vista. In SDN download section I see SAP NetWeaver 7.01 ABAP Trial Version available with Vista compatibility. Is there SAP J2EE server also available with Vista comp

  • I'm being told I need to download Flash player even though I have installed the latest version

    I'm using a Mac with Mac OS X, Version 10.7.5, with Safari 6.0.2 as my browser. I haven't had any problems with Flash player until today. Now suddenly, when I try to view Flash content, it tells me I need to download/install the latest version of Fla

  • In Answers

    HI , I have requirement like , if i did not create dimentions drill down in BMM layer at rpd level, is it possible to get drill down from answers. How is it possible? Wating for your response. Thanks, Vas

  • Forgot password protect on Pages (iPad)

    Hello, I have a document in Pages2.0 password protected on iPad. However I have forgotten the password and can not open the document. Is there anyway to override the password or reset it? Tried opeing the same document on MacBook but as I haven't upd