FETCH FIELDS FROM iw32/iw33

Hi All,
I need to fetch the configuration details from tcode IW32/IW33 and use the field values of "Material out" and "Repair code" to add new fields in the display of IW72/IW73.
Please help me to extract the detials from the Tcodes IW32 / IW33.
Useful answers will be rewarded.
Thanks in advance,
veda

Hi ,
May be following function will be useful for you.
CALL FUNCTION '/SAPAPO/OM_ORDER_GET_DATA'
Reward if helpful.
Thanks ,
Madhura N.

Similar Messages

Fetching fields from Purchase Order - ME21N

Hi,
I need to fetch the 'Delivery Date', 'Scheduled Qty', 'Committed Date', 'Committed Quantity', 'Material Availability Date' ' Goods issue Date' for a Purchase order.
The tcode is ME21N.
From which table can i get these fields, as F1 help on these fields shows a structure.
Is there any Function Module or BAPI which i can use.
Regards.

>
Akshay Raj wrote:
> Hi,
>
> I need to fetch the 'Delivery Date', 'Scheduled Qty', 'Committed Date', 'Committed Quantity', 'Material Availability Date' ' Goods issue Date' for a Purchase order.
>
> The tcode is ME21N.
>
> From which table can i get these fields, as F1 help on these fields shows a structure.
>
> Is there any Function Module or BAPI which i can use.
>
> Regards.
se84-> abap dictionary-> fields-> table fields -> short description-> execute

Fields from ECC

Hi,
What would be the logic in the view if I have to fetch fields from ECC and display in the assignment block of the CRM.
regards,
Murali

Hi Murali,
You have to define an RFC Function Module in your ECC which will retrieve the data from ECC.
Then call this RFC from your CRM view.
You can take a look at this blog :
http://wiki.sdn.sap.com/wiki/display/CRM/Howtodisplayaz-tableinanassignmentblock
although not directly related to your topic, you can use it to get an idea of the call to ERP FM.
Hope this helps.
Regards,
Nisha

Using Field symbol to fetch data from another program

I have a requirement where i need to fetch value of a field from one of the function pool so i have written a sample progam to check the logic but its doest seems to work its giving dump.
Basically i want to know how to use <programname><fieldname> with fieldsymbol.
REPORT ztest1.
DATA test(25) VALUE 'ggg'.
submit ztest.
report ztest.
constants: lv_memory(25) type c value '(ZTEST1)TEST'.
field-symbols: <fs2> type char25 .
assign (lv_memory) to <fs2>.
write : <fs2>.
I am getting same field symbol assignment dump

Hi Rahul,
You can use this concept in between the FUNCTION MODULES where both are
under same FUNCTION GROUP ( as both the FM's have same global memory area ).
And also if you are calling an FM or method from your program ,you can have the data of the calling program in that called FM or METHOD.
Hope this may help you.
Regards,
Smart Varghese

General method to fetch data from transparent tables with cluster field

Hi,
I want to know is there any general method to fetch data from the transparent tables which have cluster type field. For
example MDTC, STXL, PCL1.
thanks

Means using the IMPORT statement we can fetch data from any cluster field?
Yes, basically you should use IMPORT/EXPORT statements for clusters.
AR and MC are cluster ID (area identification), so called RELID.
By definition cluster is a combination of table and such area i.e
PCL2(RX) - international payroll resuts from table PCL2
PCL2(B2) - time results
Regards
Marcin

Fetch only required fields from SQL Table

Hi,
We have a table like below which will get data thru a job.
And I'm writing a Job/SP which will fetch 4 fields from that table and send them in a Email to Admins informing how many new employee are added newly.
How to loop thru these fields and not only there might be a chance where we will have 100 records and I need to take only first 30 of them and send.
EmpId
Empname
Deptname
Designation
Can any one has any solution on achieving this?
Thanks

Please refer the below link:
http://beyondrelational.com/modules/2/blogs/77/posts/11386/sql-server-t-sql-different-ways-to-generate-a-comma-separated-string-from-a-table.aspx
You need to use the Top30 query as your table in the script :
select top 30 EmpID,EmpName,DeptName,Designation
from tbl_name
order by EmpID
Eg: You may need to do for other columns:
--WARNING: THIS SCRIPT IS PROVIDED AS-IS AND WITHOUT
-- WARRANTY.
-- FOR DEMONSTRATION PURPOSES ONLY
--Step 01: Generate Temp table to store source data
DECLARE @NamesTable TABLE (Id INT,
Name NVARCHAR(50))
--Step 02: Generate test data
INSERT INTO @NamesTable VALUES (1,'A'),
(2,'D'),
(2,'C'),
(3,'E'),
(3,'H'),
(3,'G')
DECLARE @listIds VARCHAR(MAX) --DO NOT initialize this one!
SELECT @listIds = COALESCE(@listIds + ',' ,'') + Cast(nt.Id as varchar(10))
FROM @NamesTable nt Order by ID asc
DECLARE @listNames VARCHAR(MAX) --DO NOT initialize this one!
SELECT @listNames = COALESCE(@listNames + ',' ,'') + nt.Name
FROM @NamesTable nt Order by ID asc
SELECT 'EmpID: ' + @listIds+', EmpName: ' + @listNames

To fetch selective fields from DATABASETABLE into Internal TABLE

Hi Friends,
I have declared an internal table with fields for e.g. A , B , C , D.
This does not have any records as of now.
I have to fetch data from a DATABASE TABLE with fields A , B , X , Y , Z having records .
I only need records for fields A B fron DB table.Can any one pls tell how can I do that with performance issues in mind as lots of records are there.
I had written a query where:
SELECT A B from dbtab
into CORRESPONDING FIELDS of table it_table.
It_table i had defined with only two fields A B.
Is this correct?
Please tell wats the way to do it as I am new to ABAP.
THANKS in ADVANCE..

Hi.....
What mentioned in all above answers is very helpful for ur requirement...
and...
Here some Steps to increase the performence of your programs...
>Use Select Single when only one row is expected
>Use Select Where rather than Selectu2026Check
>Use Select with aggregate functions (SUM, MAX, MINu2026)
>Use a View instead of nested Selects
>Use Select column specific instead of select * for few fields
>Use Selectu2026Into Table rather than Select...Move Corru2026Apend
>Use Join extension with Select if possible
>Use special operators (CO, CA, CS) rather than code your own
>Use Delete Adjacent Duplicates rather than manual processing
>Specify key fields for Readu2026Binary Search
>Use Loop At Where rather than Loop Atu2026Check
>Copy Internal Tables with TAB_DEST() = TAB_SRC()
>Specify the sort key as restrictively as possible
>Use Append To, Insert Into, Collect Into rather than Move
>Compare tables with If Tab1() = Tab2()u2026
>Use Delete ITAB Whereu2026 instead of Loop At ITAB Whereu2026Delete..
>Use Case statements instead of If-constructions
>Use Call Functions wisely, Performs use less memory
>Use While instead of Do Exit
>Use Type I for Indices
>Keep Occurs clause realistic or use 0
>Use COMMIT WORK as appropriate to free the Data Base and preserve work
>
>Avoid:
>Using Shift inside a While-loop
>Leaving unneeded declarations in your program
>Using Move-corresponding for just a few fields
>Excessive nested includes within function calls
>Using DB field names if the value will be changed
>Using Occurs clause if only the header is needed
Thanks,
Naveen.I

IW31/IW32/IW33 Transaction - Custom Fields at Operation Level

Hi All,
We have a requirement that we need Custom Fields (more than 30) at Operation Level during IW31-IW32-IW33 transactions.
Can you kindly suggest the approach and which User Exit we can follow to achieve this? Is the exit 'FLT00001' suitable for this purpose?
Let me know if you guys need more information on the requirement.
Regards
Ankur Malhotra

Hi,
Check if the BADI :- /***/BADI_AFVU_MAINT :CU: BAdI for Customer Fields on Operations - Works for your case or no ..
regards
pushpa

Screen enhancement with table control IW31, IW32, IW33.

Hi Gurus,
I am facing issues with enhancement implementation for Maintenance Orders transaction IW31, IW32, IW33. (SAP basis version 4.7)
1) I have implemented enhancement IWO10018 for creating an Enhancement tab in transactions Iw31/ 32/ 33. This tab has got a table control which has 4 columns: -Operations, Operation short text, Estimated Cost and Currency Unit.
First two fields are non editable and are populated for all the Operations in Operations tab. Last two columns are editable and value entered in these are stored in the database on saving. Now the issue is I am able to fetch all the operations from AFVC table but these are the one which have been saved. Suppose I navigate between the tabs Operations and Enhancement and enter a new operation in Operations tab, I should get the same in my Enhancement tab table control field as well.
Though we can obtain one value from structure (SAPLCOIH)AFVGD but this gives only one value. If we need to get the table of values, is their any option ???
P.S. Assumption in this requirement was that there can be at max 50 operations in an order and 200 new fields are created for this in include CI_AUFK in table AUFK.
2) In standard report transction IW39 to display the orders and operations, if we need to display additional columns for displaying Estimated Costs and Units per order, how do we need to implement enhancement IWOC0004. Do we need to add all custom fields in structure RIHAUFK_LIST as well. If you could please elaborate its implementation, it would be helpful.
3) In standard report transaction IW49N, is there any enhancement available to add new fields in ALV display. (SAP basis version 4.7).
I would be grateful if i can get a quick response as I am stuck in middle of something important.
Edited by: shreya tagra on May 12, 2010 8:32 PM

Hey All,
To my questions further, I had found the runtime internal table where Operations are stored before saving.
It is AFVGD_BT and its main program is SAPLCOBO. So it can be accessed through (SAPLCOBO)AFVGD_BT[].
Also for 2 and 3 question, the given enhancement would work and we need to update fieldcatalog with custom fields.
For this add our fields in RIHAUFK_LIST.
Now, I am facing another issue. Since the enhancement tab is a subscreen, i am not able to get its okcodes. eg: When I click enhancement tab, sy-ucomm is 'CUK', when I scroll up or down again it is 'CUK', if I press enter again it is '+CUK'. To enable scrolling functions I need to get correct okcodes and differentitaed ones because on each user command, a different action is required. Any pointers how can this be achieved.
Will post my solution once i m completly done with it. Till then your pointers are awaited..
Thanks,
Shreya

How to find the number of fetched lines from select statement

Hi Experts,
Can you tell me how to find the number of fetched lines from select statements..
and one more thing is can you tell me how to check the written select statement or written statement is correct or not????
Thanks in advance
santosh

Hi,
Look for the system field SY_TABIX. That will contain the number of records which have been put into an internal table through a select statement.
For ex:
data: itab type mara occurs 0 with header line.
Select * from mara into table itab.
Write: Sy-tabix.
This will give you the number of entries that has been selected.
I am not sure what you mean by the second question. If you can let me know what you need then we might have a solution.
Hope this helps,
Sudhi
Message was edited by:
Sudhindra Chandrashekar

Fetching data from internal table in smartform

Hi,
I'm able to fetch data from one internal table, but in the table the fields are not coming perfectly, can anybody help me in this?
Thanks in advance.

Hi
You have to to specify the text node that you have created for the table that it belong to which cell in the table. Also you styles to format the text(eg: left aligned, center alinged etc)
If you have further query please post.
If this resolves your query close the thread and reward points
Cheers
Shafiq

Select query taking too much time to fetch data from pool table a005

Dear all,
I am using 2 pool table a005 and a006 in my program. I am using select query to fetch data from these table. i.e. example is mentioned below.
select * from a005 into table t_a005 for all entries in it_itab
                   where vkorg in s_vkorg
                   and     matnr in s_matnr
                   and     aplp   in s_aplp
                   and     kmunh = it_itab-kmunh.
here i can't create index also as tables are pool table...If there is any solutions , than please help me for same..
Thanks ,

it would be helpful to know what other fields are in the internal table you are using for the FOR ALL ENTRIES.
In general, you should code the order of your fields in the select in the same order as they appear in the database. If you do not have the top key field, then the entire database is read. If it's large then it's going to take a lot of time. The more key fields from the beginning of the structure that you can supply at faster the retrieval.
Regards,
Brent

Generic datasource by function module to fetch data from multiple tables?

I'm writing a function module to fetch price, for generic datasource.
At first, extract test is OK. But InfoPackage never stop when loading data to PSA in BW.
And I find the example codes:
     OPEN CURSOR WITH HOLD S_CURSOR FOR
      SELECT (S_S_IF-T_FIELDS) FROM SFLIGHT
                               WHERE CARRID IN L_R_CARRID AND
                                     CONNID IN L_R_CONNID.
    ENDIF.                             "First data package ?
* Fetch records into interface table.
*   named E_T_'Name of extract structure'.
    FETCH NEXT CURSOR S_CURSOR
               APPENDING CORRESPONDING FIELDS
               OF TABLE E_T_DATA
               PACKAGE SIZE S_S_IF-MAXSIZE.
    IF SY-SUBRC <> 0.
      CLOSE CURSOR S_CURSOR.
      RAISE NO_MORE_DATA.
    ENDIF.
    S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.
There using Cursor to fetch data package by package, and raise exception NO_MORE_DATA to stop the loading process.
Now I fetch data from multiple tables, I don't think I can use Cursor.
Then How can I handle this?
Thanks a lot.

Thanks
IF IT_999[] IS INITIAL.
    SELECT A~KNUMH A~MATNR A~KSCHL VKORG VTWEG A~DATBI A~DATAB KBETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
      TABLE TP_DATA
        FROM A999 AS A
          INNER JOIN KONP AS B
              ON A~KNUMH = B~KNUMH
          INNER JOIN MARA AS C
             ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_999
                WHERE
*      A~KNUMH = IT_999-KNUMH AND
       ( ( A~KSCHL = 'ZPRC' AND VKORG = 'Z000' AND VTWEG = 'Z1' ) OR
                      ( A~KSCHL = 'ZPRD' AND VKORG = 'A000' AND VTWEG = 'Y3' ) ) AND
*                      A~DATBI >= SY-DATUM AND
                      LOEVM_KO = ''.
    SELECT A~KNUMH A~MATNR A~KSCHL VKORG VTWEG A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
      TABLE TP_DATA
        FROM A999 AS A
          INNER JOIN KONP AS B
              ON A~KNUMH = B~KNUMH
          INNER JOIN MARA AS C
             ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_999
                WHERE
*      A~KNUMH = IT_999-KNUMH AND
      A~KSCHL = 'ZPR3' AND A~VKORG = 'I000' AND
*                      DATBI >= SY-DATUM AND
                      LOEVM_KO = ''.
ENDIF.
IF IT_997[] IS INITIAL.
    SELECT A~KNUMH A~MATNR A~KSCHL VTWEG A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
      TABLE TP_DATA
        FROM A997 AS A
          INNER JOIN KONP AS B
              ON A~KNUMH = B~KNUMH
          INNER JOIN MARA AS C
             ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_997
                WHERE
*      A~KNUMH = IT_997-KNUMH      AND
      A~KSCHL = 'ZPRA' AND VTWEG = 'Y1' AND
*                      DATBI >= SY-DATUM AND
                  LOEVM_KO = ''.
ENDIF.
IF IT_996[] IS INITIAL.
    SELECT A~KNUMH A~MATNR A~KSCHL A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
       TABLE TP_DATA
         FROM A996 AS A
           INNER JOIN KONP AS B
               ON A~KNUMH = B~KNUMH
           INNER JOIN MARA AS C
              ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_996
                WHERE
*      A~KNUMH = IT_996-KNUMH AND
      A~KSCHL = 'ZPRB' AND
*                       DATBI >= SY-DATUM AND
      LOEVM_KO = ''.
ENDIF.
SELECT   MATNR     "u7269u6599u53F7u7801
           MEINH     "u4ED3u50A8u5355u4F4Du7684u5907u7528u8BA1u91CFu5355u4F4D
           UMREZ     "u57FAu672Cu8BA1u91CFu5355u4F4Du8F6Cu6362u5206u5B50
           UMREN     "u8F6Cu6362u4E3Au57FAu672Cu8BA1u91CFu5355u4F4Du7684u5206u6BCD
      FROM MARM
      INTO CORRESPONDING FIELDS OF TABLE IT_MARM
       FOR ALL ENTRIES IN TP_DATA
     WHERE MATNR = TP_DATA-MATNR AND MEINH = TP_DATA-KMEIN.
LOOP AT TP_DATA.
    IF TP_DATA-KPEIN NE 0.
      TP_DATA-KBETR = TP_DATA-KBETR / TP_DATA-KPEIN.
      TP_DATA-KHETR = TP_DATA-KHETR / TP_DATA-KPEIN.
    ENDIF.
    IF TP_DATA-KSCHL = 'ZPRA'.
*       TP_DATA-MEINH = 'ZI'.
*      TP_DATA-KSCHL = 'B4'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'CT'.
        TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ENDIF.
    ELSEIF TP_DATA-KSCHL = 'ZPRB'.
*      TP_DATA-KSCHL = 'L0'.
*       TP_DATA-MEINH = 'ZI'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'BAG'.
        TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ENDIF.
    ELSEIF TP_DATA-KSCHL = 'ZPRC' OR TP_DATA-KSCHL = 'ZPRD'.
*       TP_DATA-MEINH = 'ZI'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KHETR = TP_DATA-KBETR * '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'WZI'.
        TP_DATA-KBETR = TP_DATA-KBETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KHETR = TP_DATA-KBETR * '1.17'.
      ENDIF.
    ELSEIF TP_DATA-KSCHL = 'ZPR3'.
*      TP_DATA-KSCHL = 'B2'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'BAG'.
        TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ENDIF.
    ENDIF.
    TP_DATA-MEINH = '01'.
    MODIFY TP_DATA.
E_T_DATA-MATNR =   TP_DATA-MATNR.
E_T_DATA-KSCHL =   TP_DATA-KSCHL.
E_T_DATA-KHETR =   TP_DATA-KHETR.
E_T_DATA-KBETR =   TP_DATA-KBETR.
E_T_DATA-KMEIN =   TP_DATA-KMEIN.
E_T_DATA-DATAB =   TP_DATA-DATAB.
E_T_DATA-DATBI =   TP_DATA-DATBI.
APPEND E_T_DATA.
    CLEAR WA_MARM1.
    CLEAR WA_MARM2.
ENDLOOP.
Edited by: Shen Peng on Oct 20, 2010 10:09 AM

Fetching data from a table and displaying it on the text box

Hi,
I have created a dialog program in which created a container(text box) to enter data upto 1000 characters.
Iam capturing the data and storing it in a custom table. In PBO I want to fetch data from my custom table (if data is already present :1000 characters data) and display it on screen.
Please let me know how do i do it?

hii Pavani,
declare this two sttements in Screen
MODULE STATUS_DATA.
MODULE SELECT_DATA.
In PBO, Under SELECT_DATA write Select query like:
(considering the DB field to be text and Screen Field to be SC_TEXT)
select text from <DB Table> into SC_TEXT where <condition>.
*note if u r selecting more than one field than write fields in ( ),eg. (f1....f2) )
Plz let me know for any further queries.
Regards,
Apoorv

How to get only custom fields from a SharePoint 2010 list?

I am working with the Client Side Object Model. In a console application I am retrieving all fields from a custom list. The problem is the Clientcontext fetches me a bunch of internal fields I do not want to be included. Also this causes some of the fields
to appear more than once.
string siteURL = "http:XYZ";
ClientContext context = new ClientContext(siteURL);
Web oWebSite = context.Web;
context.Load(oWebSite);
context.ExecuteQuery();
//Get the list by title
List produktKatalogListe = spLists.GetByTitle("Produktkatalog");
CamlQuery camlQuery = new CamlQuery();
camlQuery.ViewXml = "<View/>";
ListItemCollection listItems = produktKatalogListe.GetItems(camlQuery);
context.Load(produktKatalogListe);
context.Load(listItems);
context.Load(produktKatalogListe.Fields);
context.ExecuteQuery();
foreach(Field field in produktKatalogListe.Fields)
Console.WriteLine("{0} - {1} - {2} - {3} - {4}",field.Title,field.InternalName,field.Hidden,field.CanBeDeleted,field.FieldTypeKind);
Is there a way to print only custom fields? This would mean omitting fields like
internalID, GUID...
I tried the following:
if(!field.Hidden)
Console.WriteLine("{0} - {1} - {2} - {3} - {4}",field.Title,field.InternalName,field.Hidden,field.CanBeDeleted,field.FieldTypeKind);
Unfortunately this not only does not solve the issue but is also not a very good solution for the case I do want to display custom but hidden fields.
Algorithmen und Datenstrukturen in C#:
TechNet Wiki

The following approach seems to solve the issue. Instead for checking if the field is not
Hidden I checked whether it is not FromBaseType.
if(!field.FromBaseType)
Console.WriteLine("{0} - {1} - {2} - {3} - {4}",field.Title,field.InternalName,field.Hidden,field.CanBeDeleted,field.FieldTypeKind);
Algorithmen und Datenstrukturen in C#:
TechNet Wiki

FETCH FIELDS FROM iw32/iw33

Similar Messages

Maybe you are looking for