Fetch records under 20 seconds in my view with sysdate

hi all
I want a query in my view that it returns records under 20 seconds and
after 20 seconds my query do not show any records
my query is :
select * from cnfenterexit
where cnf06date > sysdate - (1/86400000)
but it didn't work.
when I used following query whit this numbers ,
it is OK and show records under 56 seconds
select * from cnfenterexit
where cnf06date > sysdate - (3/1440)
please explain how to get under 20 seconds in me query?

or
select *
from cnfenterexit
where cnf06date > sysdate -TO_DSINTERVAL('0 00:0:20')TO_DSINTERVAL('0 00:0:20') = 0 days, 0 hours, 0 minutes, 20 seconds
Timo

Similar Messages

For fetching records under id

I am having a master table with data like
EMPNO     DEPTID HEAD
1     IT     0
2     IT     1
3     IT     1
4     IT     1
5     IT     2
6     IT     2
7     IT     4
8     IT     4
9     IT     5
10     IT     5
11     HR     0
12     HR     1
13     HR     1
14     HR     1
Query to findout all empno under the head by passing head empno
means if i am passing empno as 1 then
LIST SHOULD BE
2,3,4,5,6,7,8,9,10
If empno is 2 then
5,6,9,10
kindly help for the same

Are you looking for something like this...
WITH tab AS
( SELECT 1 empno, 'IT' deptid, 0 head FROM dual
UNION ALL
      SELECT 2 empno, 'IT' deptid, 1 head FROM dual
UNION ALL
      SELECT 3 empno, 'IT' deptid, 1 head FROM dual
UNION ALL
      SELECT 4 empno, 'IT' deptid, 1 head FROM dual
UNION ALL
      SELECT 5 empno, 'IT' deptid, 2 head FROM dual
UNION ALL
   SELECT 6 empno, 'IT' deptid, 2 head FROM dual
UNION ALL
      SELECT 7 empno, 'IT' deptid, 4 head FROM dual
UNION ALL
      SELECT 8 empno, 'IT' deptid, 4 head FROM dual
UNION ALL
      SELECT 9 empno, 'IT' deptid, 5 head FROM dual
UNION ALL
      SELECT 10 empno, 'IT' deptid, 5 head FROM dual
UNION ALL
      SELECT 11 empno, 'HR' deptid, 0 head FROM dual
UNION ALL
   SELECT 12 empno, 'HR' deptid, 1 head FROM dual
UNION ALL
   SELECT 13 empno, 'HR' deptid, 1 head FROM dual
UNION ALL
      SELECT 14 empno, 'HR' deptid, 1 head FROM dual
SELECT ltrim(sys_connect_by_path(empno,','),',') lst
   FROM
(SELECT t.*,
    row_number() over (order by empno ) rnum
     FROM
    (SELECT connect_by_root empno root,
      empno
       FROM tab
      CONNECT BY prior empno=head
      START WITH empno      =1 and deptid='IT'--change empno to 2 here for second case
    ) t
    WHERE t.empno!=t.root
WHERE connect_by_isleaf=1
CONNECT BY prior rnum =rnum-1
START WITH rnum        =1Ravi Kumar

How can i fetch records from 3 tables in a single query without using join

Hi.
Can any body please tell me How can i fetch records from 3 tables with a single query without using joins
Thanx
prabhudutta

Hi Prabgudutta,
We can fetch the data by using the views concept.
Go throuth this info we can know the how to create view and same like database table only we can fetch the data.
Views conatin the data at runtime only.
Four different view types are supported. These differ in the
way in which the view is implemented and in the methods
permitted for accessing the view data.
Database views are implemented with an equivalent view on
the database.
Projection views are used to hide fields of a table (only
projection).
Help views can be used as selection method in search helps.
Maintenance views permit you to maintain the data
distributed
on several tables for one application object at one time.
step by step creation of Maintenance view:
With the help of the table maintenance generator, you are able to maintain the ENTRIES of the table in SM30 transaction.
It can be set in transaction SE11 - Tools - Table maintenance generator.
Table maintanance Generator is used to manually input values using transaction sm30
follow below steps
1) go to se11 check table maintanance check box under attributes tab
2) utilities-table maintanance Generator-> create function group and assign it under
function group input box. Also assign authorization group default &NC& .
3) select standard recording routine radio in table table mainitainence generator to move table
contents to quality and production by assigning it to request.
4) select maintaience type as single step.
5) maintainence screen as system generated numbers this dialog box appears when you click on create button
6) save and activate table
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.
SM30 is used for table maintenance(addition or deletion of records),
For all the tables in SE11 for which Table maintenance is selected , they can be maintained in SM30
Sm30 is used to maintain the table ,i.e to delete ,insert or modify the field values and all..
It creates the maintenance screen for u for the aprticular table as the maintenance is not allowed for the table..
In the SE11 delivery and maintenance tab, keep the maintenance allowed..
Then come to the SM30 and then enter the table name and press maintain..,
Give the authorization group if necessary and give the function group and then select maintenance type as one step and give the screen numbers as system specified..
Then create,,,
Then u will able to see the maintenance view for the table in which u can able to insert and delete the table values...
We use SM30 transaction for entering values into any DB table.
First we create a table in SE11 and create the table maintenance generator for that Table using (utilities-> table maintenance generator) and create it.
Then it will create a View.
After that from SM30, enter the table name and Maintain, create new entries, change the existing entries for that table.
Hope this resolves your query.
Reward all the helpful answers.
Rgds,
P.Naganjana Reddy

Play Count Wont Update For Songs Under 11 Seconds Long

Hello,
I have downloaded iTunes 11 and have found that it does not seem to record a play count for songs (audio-book) that are under 11 seconds in length. Is there a way to amend this so that it does record a play count for these? I am playing songs directly from iTunes.
Chris

Hi Steven -- thanks, your fix works for me too. I hadn't even known about iTunes' File > Create New Version.
An alternate symptom: If I played the song and manually clicked near the end, it *would* update correctly. But if I played it through completely w/o skipping, it wouldn't update the play-count.
For any others:
I wanted to preserve the date-imported-into-library and play-count of the new version, so:
- File > Create New Version
- Looking at the new entry I saw, via File > Get Info > Summary > Where, that the new entry pointed to a (new) file which a " 1" added to the filename.
- I quit iTunes
- manually deleted the original/bad copy in the Finder,
- renamed the newer/good copy (deleting the appened '2').
- I re-started iTunes, and found the song.
[At this point: There were still two copies of the song in my play-list (as expected), but it was NOT the case that one was shown as 'file not locatable'; both were pointing to the single, correct .mp3, and both entries the original date-imported and play-count ( ! ) -- a bit of smart library clean-up being done by iTunes under the hood.]
- While viewing the full Songs list in iTunes (not a playlist) I deleted the version I didn't want (being sure to select 'keep file' rather than 'move to trash'), and it worked fine.
> (This doesn't explain why the play count updated fine for a year, though ...)
>
Totally guessing, but: perhaps the mp3 file is not quite in the standard/proper format. An old version of iTunes handled it correctly anyway, but a 2013-Nov-ish update to iTunes suddenly relies on the file being in the correct format?
I'm assuming the mp3 file has a header stating its song-time, which is different from the data that's *actually* provided. Redundant info can increase efficiency, but it opens the door to inconsistent data, which leads to bugs. Fortunately, this is a relatively minor one....

Writing OR query for fetching records

Hi,
I have dowloaded a custom wsdl and generated a java client from it using Jdeveloper.
I have a method named customObject1QueryPage(QueryInputObj) which is used to query the CRM oD to fetch records.
I have successfully queried using the above method for one condition:-
QueryInputObj param= new QueryInputObj();
QueryType q = new QueryType();
q.set_value("='" + "ABC'");
//q.set_value("LIKE 'A*'");
param.setAccountName(q);
customObject1QueryPage(param);
But now I want to query using "OR" condition with multiple names in the condition and I don't know how to
write query for that.
SQL query would be like "Select * from table where name='ABC' OR name='PQR' OR name ='XYZ' ";
I want to execute same query for CRM oD but have no idea how to write it.
Can somebody please help me as soon as possible.
Thanks.

Hi,
If your intent to Use OR Condition on a field with multiple Values
say, AccountName = 'xyz' OR AccountName= 'abc' the syntax would be *(='xyz') OR (='abc')*
say, AccountName = 'xyz' OR AccountName= 'abc' OR AccountName = 'pqr' the syntax would be *((='xyz') OR (='abc'))OR(='pqr')*
You can find similar example under On Demand Web Service Documentation
Regards
Deepak H Andeli

List Of Value not fetching records

I have a ViewObject (VO1) with a ListOfValue that points to a ViewObject (VO2), and fetches records from VO2. There is no ViewCriteria added on VO2.
When testing in the BC tester, the LOV works fine. Both on editing a row in VO1, and when creating a row in VO1.
Using the LOV in a jspx page, the LOV works fine when editing a row in VO1. But when I'm creating a new row in the jspx page, the LOV doesn't fetch any records. Just an empty list.
I can't figure out what is wrong, or why it doesn't work. I have created several LOV all working like a charm, but this one is making me tear my hair out.
Anyone else experienced a similar scenario where a LOV only works upon editing a row?
Any ideas what can be wrong?
(I am using JDeveloper 11.1.1.5.0 - Build JDEVADF_11.1.1.5.0_GENERIC_110409.0025.6013 - Running on a Windows 7 64bit)
Edited by: hogni89 on May 3, 2012 4:01 AM

The SOC on the jspx page:
<af:selectOneChoice value="#{row.bindings.IdSosBasGrantType.inputValue}"
label="#{row.bindings.IdSosBasGrantType.label}"
required="#{bindings.SosBasCaseGrantPerCaseType.hints.IdSosBasGrantType.mandatory}"
shortDesc="#{bindings.SosBasCaseGrantPerCaseType.hints.IdSosBasGrantType.tooltip}"
id="soc12" autoSubmit="true">
<f:selectItems value="#{row.bindings.IdSosBasGrantType.items}" id="si11"/>
</af:selectOneChoice>
The iterator binding:
<tree IterBinding="SosBasCaseGrantPerCaseTypeIterator" id="SosBasCaseGrantPerCaseType">
<nodeDefinition DefName="fo.att.alm.sos.model.bas.views.SosBasCaseGrantVO" Name="SosBasCaseGrantPerCaseType0">
<AttrNames>
<Item Value="Seq"/>
<Item Value="IdSosBasGrantType"/>
<Item Value="IdSosBasGrantVariant"/>
<Item Value="RuleType"/>
<Item Value="Status"/>
<Item Value="IdAplCfgPartyType"/>
</AttrNames>
</nodeDefinition>
</tree>
The ViewAttribute:
<ViewAttribute
Name="IdSosBasGrantType"
LOVName="LOV_IdSosBasGrantType"
IsUnique="true"
IsNotNull="true"
PrecisionRule="true"
EntityAttrName="IdSosBasGrantType"
EntityUsage="SosBasCaseGrantEO"
AliasName="ID_SOS_BAS_GRANT_TYPE">
<Properties>
<SchemaBasedProperties>
<CONTROLTYPE
Value="choice"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
The ListBinding:
<ListBinding
Name="LOV_IdSosBasGrantType"
ListVOName="SosBasGrantTypeUsgLOV"
ListRangeSize="-1"
NullValueFlag="none"
NullValueId="LOV_IdSosBasGrantType_LOVUIHints_NullValueId"
MRUCount="0">
<AttrArray Name="AttrNames">
<Item Value="IdSosBasGrantType"/>
</AttrArray>
<AttrArray Name="ListAttrNames">
<Item Value="GrantTypeId"/>
</AttrArray>
<AttrArray Name="ListDisplayAttrNames">
<Item Value="ObjectTypeDisplayName"/>
</AttrArray>
<DisplayCriteria/>
</ListBinding>
The ViewAccessor
<ViewAccessor
Name="SosBasGrantTypeUsgLOV"
ViewObjectName="fo.att.alm.sos.model.bas.views.SosBasGrantTypeUsgRO"
RowLevelBinds="true"/>

I have lost the search messages function and the "sent" file under my second email address.

The search function to search messages that have been sent to me has disappeared. I also have to email addresses in thunderbird. The first one displays all my sent messages. But there is no "sent" option under my second email address

Lost search tool? That sounds as if you have lost a toolbar, or have lost a tool from the tool bar. Either way, I hope the following will help:
http://chrisramsden.vfast.co.uk/5_Lost_toolbars.html
Have you sent anything "from" this second account yet?
Check the following is set/selected:
View|Folders|All

I was told of an application that will allow the use of a second screen to view my data and files, but I forgot its name. I'd like to make the connection because my LCD is broken.

I was told of an application that will allow the use of a second screen to view my data and files, but I forgot its name. I'd like to make the connection because my LCD is broken.

You don't need an application, just plug a compaitble monitor into the display port of your MacBook Pro, set the screen up in System Preferences>Displays

PDE-PLI031 Unable to fetch record from table tool_modulre

Dear ALL
I am creating PL/SQL Libraries in report builder.
but When I try to save the Library to database, a error
PDE-PLI031 Unable to fetch record from table tool_modulre.
Would you please tell me how to solve this problem
and why it coming
thankyou very much
pritam singh

Hi ,
Saving a library (.pll) to database would store the object inside specific tables that are to be created.
If you are using 6i, then you should find toolbild & toolgrnt.sql files which you have to run in the order specified. The above scripts creates the necessary tables and henceforth you won't get those errors while saving.
Hope this helps.
Thanks,
Vinod.

HT1918 Hi - I think I have different apple devices recorded under different apple IDs. Now I would like to consolidate all the devices under one Apple-ID. I have tried to do this going through the manage accoung like, but it timed out - could somebody he

Hi - I think I have different apple devices recorded under different apple IDs. Now I would like to consolidate all the devices under one Apple-ID. I have tried to do this going through the manage accoung like, but it timed out - could somebody help, pls

Purchases of multple Apple ID accounts cannot be merged as noted here > Frequently asked questions about Apple ID

How to update multiple records in a table created in view (web dynpro)

Here is my coding......
*coding to get the district value
DATA lo_nd_district TYPE REF TO if_wd_context_node.
 DATA lo_el_district TYPE REF TO if_wd_context_element.
 DATA ls_district TYPE wd_this->element_district.
 DATA lv_district_txt LIKE ls_district-district_txt.
navigate from <CONTEXT> to <DISTRICT> via lead selection
 lo_nd_district = wd_context->get_child_node( name = wd_this->wdctx_district ).
get element via lead selection
 lo_el_district = lo_nd_district->get_element( ).
get single attribute
 lo_el_district->get_attribute(
 EXPORTING
 name = `DISTRICT_TXT`
 IMPORTING
 value = lv_district_txt ).
*coding to diplay records when clicking a button(Submit)
DATA lo_nd_table TYPE REF TO if_wd_context_node.
DATA lo_el_table TYPE REF TO if_wd_context_element.
DATA ls_table TYPE wd_this->element_table.
DATA lv_district LIKE ls_table-district.
navigate from <CONTEXT> to <TABLE> via lead selection
lo_nd_table = wd_context->get_child_node( name = wd_this->wdctx_table ).
get element via lead selection
lo_el_table = lo_nd_table->get_element( ).
get single attribute
lo_el_table->set_attribute(
 EXPORTING
 name = `DISTRICT`
 " IMPORTING
 value = lv_district_txt ).
The above coding updates only one record to that
table created in view.
If i enter 2nd district value means then the first record
in the table is overwritten.
So my need is the record should not be overwritten.
it(2nd record ) should be displayed after the 1st record.
Any one can help me and send the coding plz....

instead of using set attribute you should use bind table method to display/update the records in table view.
step1 ) collect all the data in a local table
step2 ) and the bind that lacal table with your node
search1 = wd_context->get_child_node( name = `TABLE1` ).
search1->bind_table( lt_detail)
here lt_detail is your local table and TABLE1 is node which is bound with table ui element.

Insert order by records into a view with a instead of trigger

Hi all,
I have this DML query:
INSERT INTO table_view t (a,
                          b,
                          c,
                          d,
                          e)
      SELECT   a,
               b,
               c,
               d,
               e
        FROM   table_name
    ORDER BY   dtable_view is a view with an INSTEAD OF trigger and table_name is a table with my records to be inserted.
I need the ORDER BY clause because in my trigger i call a procedure who treat each record and insert into a table, used in the view. I need to garantee these order.
If i put an other SELECT statement outside, like this:
INSERT INTO table_view t (a,
                          b,
                          c,
                          d,
                          e)
      SELECT   a,
               b,
               c,
               d,
               e
        FROM   table_name
    ORDER BY   dIt works. But I can put these new SELECT because these query is created automatic by Oracle Data Integrator.
What I'm asking you is if there any solution to this problem without changing anything in the Oracle Data Integrator. Or, in other words, if there is any simple solution other than to add a new SELECT statement.
Thanks in advance,
Regards.

Sorry... copy+paste error :)
INSERT INTO table_view t (a,
                          b,
                          c,
                          d,
                          e)
    SELECT   *
      FROM   ( SELECT   a,
                         b,
                         c,
                         d,
                         e
                  FROM   table_name
              ORDER BY   d)I need to insert him by a D column order, because my trigger needs to validate each record and insert him. I have some restrictions. For example, my records are:
2     1     2006     M
1     2     2007 M
1     3     2007     S 2007
1     2     2007     S 2007
2     1     2009     S
2     1     2009     S
I want to insert the 'M' records first and then the 'S' records because the 'S' records only makes sense in target table is exists 'M' records
Regards,
Filipe Almeida

ApEx 4.1.1: update record in a view with 'instead of update' trigger

I created a form against a view. The view is complex enough which prevents direct updates. To incorporate the update logic I created an 'instead of update' trigger on the view. When I open up the form, do changes, and click 'Apply Changes' button I am getting the following exception
ORA-02014: cannot select FOR UPDATE from view with DISTINCT, GROUP BY, etc.
I understand that the standard 'Automatic Row Processing' process is trying to lock the record before updating using a cursor like
select *
from my_view
for update
and fails. Is it possible to bypass this locking while using the standard APEX processes?
I think I can create a custom PL/SQL process which would execute the UPDATE statement (at least, it works in SQL*Plus), but I would like to know if I can use a standard ApEx functionality for this.

Hello,
Sorry for delay.
I had found a feedback about trigger issue when restore SQL Database from a BACPAC file. Microsoft said the fixed will be available in the next major release of DacFx.
Feedback:
SQL Azure fires a trigger when restoring from bacpac
You can refer to the workarounds in the feedback. For example, if there is small amount of triggers on the database, you can try to remove the triggers and then recreate when restore from bacpac file.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

How to fetch records from the database into a combo box?

Hi:
I´m really new with ABLBPM and I´m trying to fetch records from the database to display them into a combo box as valid values for a presentation but I´m using a dynamic method with this code:
for each row in SELECT campo1, campo2 from TABLE
do
solicitudes[] = [row.campo1, row.campo2]
end
return solicitudes
And the debugger says that SQL instructions can be used only in fuctions and procedures that are executed on the server.
Do you know another way to do it?
P.D. Sorry for my terrible english
Greetings

Hi Steve,
Thank you, your idea is perfect, but when I try to run the screenflow where the combo should be filled I get this error:
fuego.lang.ComponentExecutionException: No se ha podido ejecutar correctamente la tarea.
Motivo: 'java.lang.NullPointerException'.
 at fuego.web.execution.InteractiveExecution.setExecutionError(InteractiveExecution.java:307)
 at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:166)
 at fuego.web.execution.impl.WebInteractiveExecution.process(WebInteractiveExecution.java:54)
 at fuego.webdebugger.servlet.DebuggerServlet.redirect(DebuggerServlet.java:136)
 at fuego.webdebugger.servlet.DebuggerServlet.doPost(DebuggerServlet.java:85)
 at fuego.webdebugger.servlet.DebuggerServlet.doGet(DebuggerServlet.java:66)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
 at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:672)
 at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:463)
 at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:398)
 at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:301)
 at fuego.web.execution.servlet.ServletExternalContext.forwardInternal(ServletExternalContext.java:197)
 at fuego.web.execution.servlet.ServletExternalContext.processAction(ServletExternalContext.java:110)
 at fuego.webdebugger.servlet.DebuggerExecution.dispatchComponentExecution(DebuggerExecution.java:64)
 at fuego.web.execution.InteractiveExecution.invokePrepare(InteractiveExecution.java:351)
 at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:192)
 at fuego.web.execution.impl.WebInteractiveExecution.process(WebInteractiveExecution.java:54)
 at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:223)
 at fuego.webdebugger.servlet.DebuggerServlet.doDebug(DebuggerServlet.java:148)
 at fuego.webdebugger.servlet.DebuggerServlet.doPost(DebuggerServlet.java:82)
 at fuego.webdebugger.servlet.DebuggerServlet.doGet(DebuggerServlet.java:66)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
Any ideas??
Thanks and greetings

How to see results for surveys in CIC Interaction record under script prfl?

Dear Experts,
In Interaction Record>Under Script tab> I have filled a survey-> upon entering all answers and saving->System showing a message, that survey has been sucessfully saved.
But I dont know where these surveys are getting stored. and I could not find the created survey or results next time when I opened the same Interaction record.
Kindly tell me where can we find the survey results, which is created under Script tab in Interaction Record.
Your suggestions will be highly appreciated
Best regards
Raghu ram

Hello,
Have you found solution to this case?
BR
Piotr

Fetch records under 20 seconds in my view with sysdate

Similar Messages

Maybe you are looking for